diff --git a/OpenSim/Data/MSSQL/MSSQLLegacyRegionData.cs b/OpenSim/Data/MSSQL/MSSQLLegacyRegionData.cs index d6cb91f27f..7c176c79de 100644 --- a/OpenSim/Data/MSSQL/MSSQLLegacyRegionData.cs +++ b/OpenSim/Data/MSSQL/MSSQLLegacyRegionData.cs @@ -327,7 +327,7 @@ IF EXISTS (SELECT UUID FROM prims WHERE UUID = @UUID) ScriptAccessPin = @ScriptAccessPin, AllowedDrop = @AllowedDrop, DieAtEdge = @DieAtEdge, SalePrice = @SalePrice, SaleType = @SaleType, ColorR = @ColorR, ColorG = @ColorG, ColorB = @ColorB, ColorA = @ColorA, ParticleSystem = @ParticleSystem, ClickAction = @ClickAction, Material = @Material, CollisionSound = @CollisionSound, CollisionSoundVolume = @CollisionSoundVolume, PassTouches = @PassTouches, - LinkNumber = @LinkNumber + LinkNumber = @LinkNumber, MediaURL = @MediaURL WHERE UUID = @UUID END ELSE @@ -342,7 +342,7 @@ ELSE PayPrice, PayButton1, PayButton2, PayButton3, PayButton4, LoopedSound, LoopedSoundGain, TextureAnimation, OmegaX, OmegaY, OmegaZ, CameraEyeOffsetX, CameraEyeOffsetY, CameraEyeOffsetZ, CameraAtOffsetX, CameraAtOffsetY, CameraAtOffsetZ, ForceMouselook, ScriptAccessPin, AllowedDrop, DieAtEdge, SalePrice, SaleType, ColorR, ColorG, ColorB, ColorA, - ParticleSystem, ClickAction, Material, CollisionSound, CollisionSoundVolume, PassTouches, LinkNumber + ParticleSystem, ClickAction, Material, CollisionSound, CollisionSoundVolume, PassTouches, LinkNumber, MediaURL ) VALUES ( @UUID, @CreationDate, @Name, @Text, @Description, @SitName, @TouchName, @ObjectFlags, @OwnerMask, @NextOwnerMask, @GroupMask, @EveryoneMask, @BaseMask, @PositionX, @PositionY, @PositionZ, @GroupPositionX, @GroupPositionY, @GroupPositionZ, @VelocityX, @@ -352,7 +352,7 @@ ELSE @PayPrice, @PayButton1, @PayButton2, @PayButton3, @PayButton4, @LoopedSound, @LoopedSoundGain, @TextureAnimation, @OmegaX, @OmegaY, @OmegaZ, @CameraEyeOffsetX, @CameraEyeOffsetY, @CameraEyeOffsetZ, @CameraAtOffsetX, @CameraAtOffsetY, @CameraAtOffsetZ, @ForceMouselook, @ScriptAccessPin, @AllowedDrop, @DieAtEdge, @SalePrice, @SaleType, @ColorR, @ColorG, @ColorB, @ColorA, - @ParticleSystem, @ClickAction, @Material, @CollisionSound, @CollisionSoundVolume, @PassTouches, @LinkNumber + @ParticleSystem, @ClickAction, @Material, @CollisionSound, @CollisionSoundVolume, @PassTouches, @LinkNumber, @MediaURL ) END"; @@ -385,7 +385,7 @@ IF EXISTS (SELECT UUID FROM primshapes WHERE UUID = @UUID) PathSkew = @PathSkew, PathCurve = @PathCurve, PathRadiusOffset = @PathRadiusOffset, PathRevolutions = @PathRevolutions, PathTaperX = @PathTaperX, PathTaperY = @PathTaperY, PathTwist = @PathTwist, PathTwistBegin = @PathTwistBegin, ProfileBegin = @ProfileBegin, ProfileEnd = @ProfileEnd, ProfileCurve = @ProfileCurve, ProfileHollow = @ProfileHollow, - Texture = @Texture, ExtraParams = @ExtraParams, State = @State + Texture = @Texture, ExtraParams = @ExtraParams, State = @State, Media = @Media WHERE UUID = @UUID END ELSE @@ -394,11 +394,11 @@ ELSE primshapes ( UUID, Shape, ScaleX, ScaleY, ScaleZ, PCode, PathBegin, PathEnd, PathScaleX, PathScaleY, PathShearX, PathShearY, PathSkew, PathCurve, PathRadiusOffset, PathRevolutions, PathTaperX, PathTaperY, PathTwist, PathTwistBegin, ProfileBegin, - ProfileEnd, ProfileCurve, ProfileHollow, Texture, ExtraParams, State + ProfileEnd, ProfileCurve, ProfileHollow, Texture, ExtraParams, State, Media ) VALUES ( @UUID, @Shape, @ScaleX, @ScaleY, @ScaleZ, @PCode, @PathBegin, @PathEnd, @PathScaleX, @PathScaleY, @PathShearX, @PathShearY, @PathSkew, @PathCurve, @PathRadiusOffset, @PathRevolutions, @PathTaperX, @PathTaperY, @PathTwist, @PathTwistBegin, @ProfileBegin, - @ProfileEnd, @ProfileCurve, @ProfileHollow, @Texture, @ExtraParams, @State + @ProfileEnd, @ProfileCurve, @ProfileHollow, @Texture, @ExtraParams, @State, @Media ) END"; @@ -1127,6 +1127,9 @@ VALUES if (Convert.ToInt16(primRow["PassTouches"]) != 0) prim.PassTouches = true; prim.LinkNum = Convert.ToInt32(primRow["LinkNumber"]); + + if (!(primRow["MediaURL"] is System.DBNull)) + prim.MediaUrl = (string)primRow["MediaURL"]; return prim; } @@ -1180,6 +1183,9 @@ VALUES { } + if (!(shapeRow["Media"] is System.DBNull)) + baseShape.Media = PrimitiveBaseShape.MediaList.FromXml((string)shapeRow["Media"]); + return baseShape; } @@ -1509,7 +1515,8 @@ VALUES parameters.Add(_Database.CreateParameter("PassTouches", 1)); else parameters.Add(_Database.CreateParameter("PassTouches", 0)); - parameters.Add(_Database.CreateParameter("LinkNumber", prim.LinkNum)); + parameters.Add(_Database.CreateParameter("LinkNumber", prim.LinkNum)); + parameters.Add(_Database.CreateParameter("MediaURL", prim.MediaUrl)); return parameters.ToArray(); } @@ -1557,6 +1564,7 @@ VALUES parameters.Add(_Database.CreateParameter("Texture", s.TextureEntry)); parameters.Add(_Database.CreateParameter("ExtraParams", s.ExtraParams)); parameters.Add(_Database.CreateParameter("State", s.State)); + parameters.Add(_Database.CreateParameter("Media", null == s.Media ? null : s.Media.ToXml())); return parameters.ToArray(); } diff --git a/OpenSim/Data/MSSQL/Resources/RegionStore.migrations b/OpenSim/Data/MSSQL/Resources/RegionStore.migrations index e912d646a0..e2e8cbb117 100644 --- a/OpenSim/Data/MSSQL/Resources/RegionStore.migrations +++ b/OpenSim/Data/MSSQL/Resources/RegionStore.migrations @@ -1,4 +1,4 @@ - + :VERSION 1 CREATE TABLE [dbo].[prims]( @@ -925,5 +925,12 @@ ALTER TABLE regionsettings ADD loaded_creation_datetime int NOT NULL default 0 COMMIT +:VERSION 24 +-- Added post 0.7 +BEGIN TRANSACTION +ALTER TABLE prims ADD COLUMN MediaURL varchar(255) +ALTER TABLE primshapes ADD COLUMN Media TEXT + +COMMIT \ No newline at end of file diff --git a/OpenSim/Data/MySQL/MySQLLegacyRegionData.cs b/OpenSim/Data/MySQL/MySQLLegacyRegionData.cs index bfeae12385..d8debc5274 100644 --- a/OpenSim/Data/MySQL/MySQLLegacyRegionData.cs +++ b/OpenSim/Data/MySQL/MySQLLegacyRegionData.cs @@ -174,7 +174,7 @@ namespace OpenSim.Data.MySQL "ParticleSystem, ClickAction, Material, " + "CollisionSound, CollisionSoundVolume, " + "PassTouches, " + - "LinkNumber) values (" + "?UUID, " + + "LinkNumber, MediaURL) values (" + "?UUID, " + "?CreationDate, ?Name, ?Text, " + "?Description, ?SitName, ?TouchName, " + "?ObjectFlags, ?OwnerMask, ?NextOwnerMask, " + @@ -205,7 +205,7 @@ namespace OpenSim.Data.MySQL "?SaleType, ?ColorR, ?ColorG, " + "?ColorB, ?ColorA, ?ParticleSystem, " + "?ClickAction, ?Material, ?CollisionSound, " + - "?CollisionSoundVolume, ?PassTouches, ?LinkNumber)"; + "?CollisionSoundVolume, ?PassTouches, ?LinkNumber, ?MediaURL)"; FillPrimCommand(cmd, prim, obj.UUID, regionUUID); @@ -222,7 +222,7 @@ namespace OpenSim.Data.MySQL "PathTaperX, PathTaperY, PathTwist, " + "PathTwistBegin, ProfileBegin, ProfileEnd, " + "ProfileCurve, ProfileHollow, Texture, " + - "ExtraParams, State) values (?UUID, " + + "ExtraParams, State, Media) values (?UUID, " + "?Shape, ?ScaleX, ?ScaleY, ?ScaleZ, " + "?PCode, ?PathBegin, ?PathEnd, " + "?PathScaleX, ?PathScaleY, " + @@ -233,7 +233,7 @@ namespace OpenSim.Data.MySQL "?PathTwistBegin, ?ProfileBegin, " + "?ProfileEnd, ?ProfileCurve, " + "?ProfileHollow, ?Texture, ?ExtraParams, " + - "?State)"; + "?State, ?Media)"; FillShapeCommand(cmd, prim); @@ -1184,6 +1184,9 @@ namespace OpenSim.Data.MySQL prim.PassTouches = ((sbyte)row["PassTouches"] != 0); prim.LinkNum = (int)row["LinkNumber"]; + + if (!(row["MediaURL"] is System.DBNull)) + prim.MediaUrl = (string)row["MediaURL"]; return prim; } @@ -1521,6 +1524,7 @@ namespace OpenSim.Data.MySQL cmd.Parameters.AddWithValue("PassTouches", 0); cmd.Parameters.AddWithValue("LinkNumber", prim.LinkNum); + cmd.Parameters.AddWithValue("MediaURL", prim.MediaUrl); } /// @@ -1700,6 +1704,9 @@ namespace OpenSim.Data.MySQL s.ExtraParams = (byte[])row["ExtraParams"]; s.State = (byte)(int)row["State"]; + + if (!(row["Media"] is System.DBNull)) + s.Media = PrimitiveBaseShape.MediaList.FromXml((string)row["Media"]); return s; } @@ -1743,6 +1750,7 @@ namespace OpenSim.Data.MySQL cmd.Parameters.AddWithValue("Texture", s.TextureEntry); cmd.Parameters.AddWithValue("ExtraParams", s.ExtraParams); cmd.Parameters.AddWithValue("State", s.State); + cmd.Parameters.AddWithValue("Media", null == s.Media ? null : s.Media.ToXml()); } public void StorePrimInventory(UUID primID, ICollection items) diff --git a/OpenSim/Data/MySQL/Resources/RegionStore.migrations b/OpenSim/Data/MySQL/Resources/RegionStore.migrations index 3f644f903f..13697043f1 100644 --- a/OpenSim/Data/MySQL/Resources/RegionStore.migrations +++ b/OpenSim/Data/MySQL/Resources/RegionStore.migrations @@ -1,4 +1,4 @@ - + :VERSION 1 #--------------------- BEGIN; @@ -800,3 +800,10 @@ BEGIN; ALTER TABLE `regionwindlight` CHANGE COLUMN `cloud_scroll_x` `cloud_scroll_x` FLOAT(4,2) NOT NULL DEFAULT '0.20' AFTER `cloud_detail_density`, CHANGE COLUMN `cloud_scroll_y` `cloud_scroll_y` FLOAT(4,2) NOT NULL DEFAULT '0.01' AFTER `cloud_scroll_x_lock`; COMMIT; +:VERSION 35 #--------------------- +-- Added post 0.7 + +BEGIN; +ALTER TABLE prims ADD COLUMN MediaURL varchar(255); +ALTER TABLE primshapes ADD COLUMN Media TEXT; +COMMIT; \ No newline at end of file diff --git a/OpenSim/Data/SQLite/Resources/020_RegionStore.sql b/OpenSim/Data/SQLite/Resources/020_RegionStore.sql new file mode 100644 index 0000000000..39cb752979 --- /dev/null +++ b/OpenSim/Data/SQLite/Resources/020_RegionStore.sql @@ -0,0 +1,6 @@ +BEGIN; + +ALTER TABLE prims ADD COLUMN MediaURL varchar(255); +ALTER TABLE primshapes ADD COLUMN Media TEXT; + +COMMIT; \ No newline at end of file diff --git a/OpenSim/Data/SQLite/SQLiteRegionData.cs b/OpenSim/Data/SQLite/SQLiteRegionData.cs index 81d0ac4f6e..4208050ab9 100644 --- a/OpenSim/Data/SQLite/SQLiteRegionData.cs +++ b/OpenSim/Data/SQLite/SQLiteRegionData.cs @@ -34,6 +34,7 @@ using System.Reflection; using log4net; using Mono.Data.Sqlite; using OpenMetaverse; +using OpenMetaverse.StructuredData; using OpenSim.Framework; using OpenSim.Region.Framework.Interfaces; using OpenSim.Region.Framework.Scenes; @@ -974,6 +975,8 @@ namespace OpenSim.Data.SQLite createCol(prims, "CollisionSoundVolume", typeof(Double)); createCol(prims, "VolumeDetect", typeof(Int16)); + + createCol(prims, "MediaURL", typeof(String)); // Add in contraints prims.PrimaryKey = new DataColumn[] {prims.Columns["UUID"]}; @@ -1021,6 +1024,7 @@ namespace OpenSim.Data.SQLite // way to specify this as a blob atm createCol(shapes, "Texture", typeof (Byte[])); createCol(shapes, "ExtraParams", typeof (Byte[])); + createCol(shapes, "Media", typeof(String)); shapes.PrimaryKey = new DataColumn[] {shapes.Columns["UUID"]}; @@ -1339,6 +1343,12 @@ namespace OpenSim.Data.SQLite if (Convert.ToInt16(row["VolumeDetect"]) != 0) prim.VolumeDetectActive = true; + + if (!(row["MediaURL"] is System.DBNull)) + { + //m_log.DebugFormat("[SQLITE]: MediaUrl type [{0}]", row["MediaURL"].GetType()); + prim.MediaUrl = (string)row["MediaURL"]; + } return prim; } @@ -1614,7 +1624,6 @@ namespace OpenSim.Data.SQLite row["PayButton3"] = prim.PayPrice[3]; row["PayButton4"] = prim.PayPrice[4]; - row["TextureAnimation"] = Convert.ToBase64String(prim.TextureAnimation); row["ParticleSystem"] = Convert.ToBase64String(prim.ParticleSystem); @@ -1674,7 +1683,8 @@ namespace OpenSim.Data.SQLite row["VolumeDetect"] = 1; else row["VolumeDetect"] = 0; - + + row["MediaURL"] = prim.MediaUrl; } /// @@ -1849,6 +1859,10 @@ namespace OpenSim.Data.SQLite s.TextureEntry = textureEntry; s.ExtraParams = (byte[]) row["ExtraParams"]; + + if (!(row["Media"] is System.DBNull)) + s.Media = PrimitiveBaseShape.MediaList.FromXml((string)row["Media"]); + return s; } @@ -1892,17 +1906,19 @@ namespace OpenSim.Data.SQLite row["Texture"] = s.TextureEntry; row["ExtraParams"] = s.ExtraParams; + + if (s.Media != null) + row["Media"] = s.Media.ToXml(); } /// - /// + /// Persistently store a prim. /// /// /// /// private void addPrim(SceneObjectPart prim, UUID sceneGroupID, UUID regionUUID) { - DataTable prims = ds.Tables["prims"]; DataTable shapes = ds.Tables["primshapes"]; diff --git a/OpenSim/Framework/PrimitiveBaseShape.cs b/OpenSim/Framework/PrimitiveBaseShape.cs index 4d1de22eeb..70a61cc622 100644 --- a/OpenSim/Framework/PrimitiveBaseShape.cs +++ b/OpenSim/Framework/PrimitiveBaseShape.cs @@ -26,12 +26,17 @@ */ using System; +using System.Collections.Generic; using System.Drawing; using System.Drawing.Imaging; +using System.IO; using System.Reflection; +using System.Xml; +using System.Xml.Schema; using System.Xml.Serialization; using log4net; using OpenMetaverse; +using OpenMetaverse.StructuredData; namespace OpenSim.Framework { @@ -170,6 +175,13 @@ namespace OpenSim.Framework } } } + + /// + /// Entries to store media textures on each face + /// + /// Do not change this value directly - always do it through an IMoapModule. + /// Lock before manipulating. + public MediaList Media { get; set; } public PrimitiveBaseShape() { @@ -1207,5 +1219,104 @@ namespace OpenSim.Framework return prim; } - } -} + + /// + /// Encapsulates a list of media entries. + /// + /// This class is necessary because we want to replace auto-serialization of MediaEntry with something more + /// OSD like and less vulnerable to change. + public class MediaList : List, IXmlSerializable + { + public const string MEDIA_TEXTURE_TYPE = "sl"; + + public MediaList() : base() {} + public MediaList(IEnumerable collection) : base(collection) {} + public MediaList(int capacity) : base(capacity) {} + + public XmlSchema GetSchema() + { + return null; + } + + public string ToXml() + { + lock (this) + { + using (StringWriter sw = new StringWriter()) + { + using (XmlTextWriter xtw = new XmlTextWriter(sw)) + { + xtw.WriteStartElement("OSMedia"); + xtw.WriteAttributeString("type", MEDIA_TEXTURE_TYPE); + xtw.WriteAttributeString("version", "0.1"); + + OSDArray meArray = new OSDArray(); + foreach (MediaEntry me in this) + { + OSD osd = (null == me ? new OSD() : me.GetOSD()); + meArray.Add(osd); + } + + xtw.WriteStartElement("OSData"); + xtw.WriteRaw(OSDParser.SerializeLLSDXmlString(meArray)); + xtw.WriteEndElement(); + + xtw.WriteEndElement(); + + xtw.Flush(); + return sw.ToString(); + } + } + } + } + + public void WriteXml(XmlWriter writer) + { + writer.WriteRaw(ToXml()); + } + + public static MediaList FromXml(string rawXml) + { + MediaList ml = new MediaList(); + ml.ReadXml(rawXml); + return ml; + } + + public void ReadXml(string rawXml) + { + using (StringReader sr = new StringReader(rawXml)) + { + using (XmlTextReader xtr = new XmlTextReader(sr)) + { + xtr.MoveToContent(); + + string type = xtr.GetAttribute("type"); + //m_log.DebugFormat("[MOAP]: Loaded media texture entry with type {0}", type); + + if (type != MEDIA_TEXTURE_TYPE) + return; + + xtr.ReadStartElement("OSMedia"); + + OSDArray osdMeArray = (OSDArray)OSDParser.DeserializeLLSDXml(xtr.ReadInnerXml()); + foreach (OSD osdMe in osdMeArray) + { + MediaEntry me = (osdMe is OSDMap ? MediaEntry.FromOSD(osdMe) : new MediaEntry()); + Add(me); + } + + xtr.ReadEndElement(); + } + } + } + + public void ReadXml(XmlReader reader) + { + if (reader.IsEmptyElement) + return; + + ReadXml(reader.ReadInnerXml()); + } + } + } +} \ No newline at end of file diff --git a/OpenSim/Framework/Servers/HttpServer/BaseHttpServer.cs b/OpenSim/Framework/Servers/HttpServer/BaseHttpServer.cs index 8123f2fed7..ffa30d5936 100644 --- a/OpenSim/Framework/Servers/HttpServer/BaseHttpServer.cs +++ b/OpenSim/Framework/Servers/HttpServer/BaseHttpServer.cs @@ -362,7 +362,7 @@ namespace OpenSim.Framework.Servers.HttpServer string path = request.RawUrl; string handlerKey = GetHandlerKey(request.HttpMethod, path); - //m_log.DebugFormat("[BASE HTTP SERVER]: Handling {0} request for {1}", request.HttpMethod, path); +// m_log.DebugFormat("[BASE HTTP SERVER]: Handling {0} request for {1}", request.HttpMethod, path); if (TryGetStreamHandler(handlerKey, out requestHandler)) { diff --git a/OpenSim/Region/ClientStack/LindenUDP/LLClientView.cs b/OpenSim/Region/ClientStack/LindenUDP/LLClientView.cs index 0aec01a021..c59eedf188 100644 --- a/OpenSim/Region/ClientStack/LindenUDP/LLClientView.cs +++ b/OpenSim/Region/ClientStack/LindenUDP/LLClientView.cs @@ -4288,8 +4288,6 @@ namespace OpenSim.Region.ClientStack.LindenUDP public void SendLandObjectOwners(LandData land, List groups, Dictionary ownersAndCount) { - - int notifyCount = ownersAndCount.Count; ParcelObjectOwnersReplyPacket pack = (ParcelObjectOwnersReplyPacket)PacketPool.Instance.GetPacket(PacketType.ParcelObjectOwnersReply); @@ -4561,6 +4559,7 @@ namespace OpenSim.Region.ClientStack.LindenUDP update.TextureEntry = data.Shape.TextureEntry ?? Utils.EmptyBytes; update.Scale = data.Shape.Scale; update.Text = Util.StringToBytes256(data.Text); + update.MediaURL = Util.StringToBytes256(data.MediaUrl); #region PrimFlags diff --git a/OpenSim/Region/CoreModules/World/Media/Moap/MoapModule.cs b/OpenSim/Region/CoreModules/World/Media/Moap/MoapModule.cs new file mode 100644 index 0000000000..82ad109a49 --- /dev/null +++ b/OpenSim/Region/CoreModules/World/Media/Moap/MoapModule.cs @@ -0,0 +1,596 @@ +/* + * Copyright (c) Contributors, http://opensimulator.org/ + * See CONTRIBUTORS.TXT for a full list of copyright holders. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of the OpenSimulator Project nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +using System; +using System.Collections; +using System.Collections.Generic; +using System.Collections.Specialized; +using System.Reflection; +using System.IO; +using System.Web; +using System.Xml; +using log4net; +using Mono.Addins; +using Nini.Config; +using OpenMetaverse; +using OpenMetaverse.Messages.Linden; +using OpenMetaverse.StructuredData; +using OpenSim.Framework; +using OpenSim.Framework.Capabilities; +using OpenSim.Framework.Servers; +using OpenSim.Framework.Servers.HttpServer; +using OpenSim.Region.Framework.Interfaces; +using OpenSim.Region.Framework.Scenes; +using OpenSim.Services.Interfaces; +using Caps = OpenSim.Framework.Capabilities.Caps; +using OSDArray = OpenMetaverse.StructuredData.OSDArray; +using OSDMap = OpenMetaverse.StructuredData.OSDMap; + +namespace OpenSim.Region.CoreModules.Media.Moap +{ + [Extension(Path = "/OpenSim/RegionModules", NodeName = "RegionModule", Id = "MoapModule")] + public class MoapModule : INonSharedRegionModule, IMoapModule + { + private static readonly ILog m_log = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType); + + public string Name { get { return "MoapModule"; } } + public Type ReplaceableInterface { get { return null; } } + + /// + /// Is this module enabled? + /// + protected bool m_isEnabled = true; + + /// + /// The scene to which this module is attached + /// + protected Scene m_scene; + + /// + /// Track the ObjectMedia capabilities given to users keyed by path + /// + protected Dictionary m_omCapUsers = new Dictionary(); + + /// + /// Track the ObjectMedia capabilities given to users keyed by agent. Lock m_omCapUsers to manipulate. + /// + protected Dictionary m_omCapUrls = new Dictionary(); + + /// + /// Track the ObjectMediaUpdate capabilities given to users keyed by path + /// + protected Dictionary m_omuCapUsers = new Dictionary(); + + /// + /// Track the ObjectMediaUpdate capabilities given to users keyed by agent. Lock m_omuCapUsers to manipulate + /// + protected Dictionary m_omuCapUrls = new Dictionary(); + + public void Initialise(IConfigSource configSource) + { + IConfig config = configSource.Configs["MediaOnAPrim"]; + + if (config != null && !config.GetBoolean("Enabled", false)) + m_isEnabled = false; +// else +// m_log.Debug("[MOAP]: Initialised module.")l + } + + public void AddRegion(Scene scene) + { + if (!m_isEnabled) + return; + + m_scene = scene; + m_scene.RegisterModuleInterface(this); + } + + public void RemoveRegion(Scene scene) {} + + public void RegionLoaded(Scene scene) + { + if (!m_isEnabled) + return; + + m_scene.EventManager.OnRegisterCaps += OnRegisterCaps; + m_scene.EventManager.OnDeregisterCaps += OnDeregisterCaps; + m_scene.EventManager.OnSceneObjectPartCopy += OnSceneObjectPartCopy; + } + + public void Close() + { + if (!m_isEnabled) + return; + + m_scene.EventManager.OnRegisterCaps -= OnRegisterCaps; + m_scene.EventManager.OnDeregisterCaps -= OnDeregisterCaps; + m_scene.EventManager.OnSceneObjectPartCopy -= OnSceneObjectPartCopy; + } + + public void OnRegisterCaps(UUID agentID, Caps caps) + { +// m_log.DebugFormat( +// "[MOAP]: Registering ObjectMedia and ObjectMediaNavigate capabilities for agent {0}", agentID); + + string omCapUrl = "/CAPS/" + UUID.Random(); + + lock (m_omCapUsers) + { + m_omCapUsers[omCapUrl] = agentID; + m_omCapUrls[agentID] = omCapUrl; + + // Even though we're registering for POST we're going to get GETS and UPDATES too + caps.RegisterHandler( + "ObjectMedia", new RestStreamHandler("POST", omCapUrl, HandleObjectMediaMessage)); + } + + string omuCapUrl = "/CAPS/" + UUID.Random(); + + lock (m_omuCapUsers) + { + m_omuCapUsers[omuCapUrl] = agentID; + m_omuCapUrls[agentID] = omuCapUrl; + + // Even though we're registering for POST we're going to get GETS and UPDATES too + caps.RegisterHandler( + "ObjectMediaNavigate", new RestStreamHandler("POST", omuCapUrl, HandleObjectMediaNavigateMessage)); + } + } + + public void OnDeregisterCaps(UUID agentID, Caps caps) + { + lock (m_omCapUsers) + { + string path = m_omCapUrls[agentID]; + m_omCapUrls.Remove(agentID); + m_omCapUsers.Remove(path); + } + + lock (m_omuCapUsers) + { + string path = m_omuCapUrls[agentID]; + m_omuCapUrls.Remove(agentID); + m_omuCapUsers.Remove(path); + } + } + + protected void OnSceneObjectPartCopy(SceneObjectPart copy, SceneObjectPart original, bool userExposed) + { + if (original.Shape.Media != null) + { + PrimitiveBaseShape.MediaList dupeMedia = new PrimitiveBaseShape.MediaList(); + lock (original.Shape.Media) + { + foreach (MediaEntry me in original.Shape.Media) + { + if (me != null) + dupeMedia.Add(MediaEntry.FromOSD(me.GetOSD())); + else + dupeMedia.Add(null); + } + } + + copy.Shape.Media = dupeMedia; + } + } + + public MediaEntry GetMediaEntry(SceneObjectPart part, int face) + { + MediaEntry me = null; + + CheckFaceParam(part, face); + + List media = part.Shape.Media; + + if (null == media) + { + me = null; + } + else + { + lock (media) + me = media[face]; + + // TODO: Really need a proper copy constructor down in libopenmetaverse + if (me != null) + me = MediaEntry.FromOSD(me.GetOSD()); + } + +// m_log.DebugFormat("[MOAP]: GetMediaEntry for {0} face {1} found {2}", part.Name, face, me); + + return me; + } + + public void SetMediaEntry(SceneObjectPart part, int face, MediaEntry me) + { + CheckFaceParam(part, face); + + if (null == part.Shape.Media) + part.Shape.Media = new PrimitiveBaseShape.MediaList(new MediaEntry[part.GetNumberOfSides()]); + + lock (part.Shape.Media) + part.Shape.Media[face] = me; + + UpdateMediaUrl(part, UUID.Zero); + part.ScheduleFullUpdate(); + part.TriggerScriptChangedEvent(Changed.MEDIA); + } + + public void ClearMediaEntry(SceneObjectPart part, int face) + { + SetMediaEntry(part, face, null); + } + + /// + /// Sets or gets per face media textures. + /// + /// + /// + /// + /// + /// + /// + protected string HandleObjectMediaMessage( + string request, string path, string param, OSHttpRequest httpRequest, OSHttpResponse httpResponse) + { +// m_log.DebugFormat("[MOAP]: Got ObjectMedia path [{0}], raw request [{1}]", path, request); + + OSDMap osd = (OSDMap)OSDParser.DeserializeLLSDXml(request); + ObjectMediaMessage omm = new ObjectMediaMessage(); + omm.Deserialize(osd); + + if (omm.Request is ObjectMediaRequest) + return HandleObjectMediaRequest(omm.Request as ObjectMediaRequest); + else if (omm.Request is ObjectMediaUpdate) + return HandleObjectMediaUpdate(path, omm.Request as ObjectMediaUpdate); + + throw new Exception( + string.Format( + "[MOAP]: ObjectMediaMessage has unrecognized ObjectMediaBlock of {0}", + omm.Request.GetType())); + } + + /// + /// Handle a fetch request for media textures + /// + /// + /// + protected string HandleObjectMediaRequest(ObjectMediaRequest omr) + { + UUID primId = omr.PrimID; + + SceneObjectPart part = m_scene.GetSceneObjectPart(primId); + + if (null == part) + { + m_log.WarnFormat( + "[MOAP]: Received a GET ObjectMediaRequest for prim {0} but this doesn't exist in region {1}", + primId, m_scene.RegionInfo.RegionName); + return string.Empty; + } + + if (null == part.Shape.Media) + return string.Empty; + + ObjectMediaResponse resp = new ObjectMediaResponse(); + + resp.PrimID = primId; + + lock (part.Shape.Media) + resp.FaceMedia = part.Shape.Media.ToArray(); + + resp.Version = part.MediaUrl; + + string rawResp = OSDParser.SerializeLLSDXmlString(resp.Serialize()); + +// m_log.DebugFormat("[MOAP]: Got HandleObjectMediaRequestGet raw response is [{0}]", rawResp); + + return rawResp; + } + + /// + /// Handle an update of media textures. + /// + /// Path on which this request was made + /// /param> + /// + protected string HandleObjectMediaUpdate(string path, ObjectMediaUpdate omu) + { + UUID primId = omu.PrimID; + + SceneObjectPart part = m_scene.GetSceneObjectPart(primId); + + if (null == part) + { + m_log.WarnFormat( + "[MOAP]: Received an UPDATE ObjectMediaRequest for prim {0} but this doesn't exist in region {1}", + primId, m_scene.RegionInfo.RegionName); + return string.Empty; + } + +// m_log.DebugFormat("[MOAP]: Received {0} media entries for prim {1}", omu.FaceMedia.Length, primId); + +// for (int i = 0; i < omu.FaceMedia.Length; i++) +// { +// MediaEntry me = omu.FaceMedia[i]; +// string v = (null == me ? "null": OSDParser.SerializeLLSDXmlString(me.GetOSD())); +// m_log.DebugFormat("[MOAP]: Face {0} [{1}]", i, v); +// } + + if (omu.FaceMedia.Length > part.GetNumberOfSides()) + { + m_log.WarnFormat( + "[MOAP]: Received {0} media entries from client for prim {1} {2} but this prim has only {3} faces. Dropping request.", + omu.FaceMedia.Length, part.Name, part.UUID, part.GetNumberOfSides()); + return string.Empty; + } + + UUID agentId = default(UUID); + + lock (m_omCapUsers) + agentId = m_omCapUsers[path]; + + List media = part.Shape.Media; + + if (null == media) + { +// m_log.DebugFormat("[MOAP]: Setting all new media list for {0}", part.Name); + part.Shape.Media = new PrimitiveBaseShape.MediaList(omu.FaceMedia); + + for (int i = 0; i < omu.FaceMedia.Length; i++) + { + if (omu.FaceMedia[i] != null) + { + // FIXME: Race condition here since some other texture entry manipulator may overwrite/get + // overwritten. Unfortunately, PrimitiveBaseShape does not allow us to change texture entry + // directly. + Primitive.TextureEntry te = part.Shape.Textures; + Primitive.TextureEntryFace face = te.CreateFace((uint)i); + face.MediaFlags = true; + part.Shape.Textures = te; +// m_log.DebugFormat( +// "[MOAP]: Media flags for face {0} is {1}", +// i, part.Shape.Textures.FaceTextures[i].MediaFlags); + } + } + } + else + { + // We need to go through the media textures one at a time to make sure that we have permission + // to change them + + // FIXME: Race condition here since some other texture entry manipulator may overwrite/get + // overwritten. Unfortunately, PrimitiveBaseShape does not allow us to change texture entry + // directly. + Primitive.TextureEntry te = part.Shape.Textures; + + lock (media) + { + for (int i = 0; i < media.Count; i++) + { + if (m_scene.Permissions.CanControlPrimMedia(agentId, part.UUID, i)) + { + media[i] = omu.FaceMedia[i]; + + // When a face is cleared this is done by setting the MediaFlags in the TextureEntry via a normal + // texture update, so we don't need to worry about clearing MediaFlags here. + if (null == media[i]) + continue; + + Primitive.TextureEntryFace face = te.CreateFace((uint)i); + face.MediaFlags = true; + + // m_log.DebugFormat( + // "[MOAP]: Media flags for face {0} is {1}", + // i, face.MediaFlags); + // m_log.DebugFormat("[MOAP]: Set media entry for face {0} on {1}", i, part.Name); + } + } + } + + part.Shape.Textures = te; + +// for (int i2 = 0; i2 < part.Shape.Textures.FaceTextures.Length; i2++) +// m_log.DebugFormat("[MOAP]: FaceTexture[{0}] is {1}", i2, part.Shape.Textures.FaceTextures[i2]); + } + + UpdateMediaUrl(part, agentId); + + // Arguably, we could avoid sending a full update to the avatar that just changed the texture. + part.ScheduleFullUpdate(); + + part.TriggerScriptChangedEvent(Changed.MEDIA); + + return string.Empty; + } + + /// + /// Received from the viewer if a user has changed the url of a media texture. + /// + /// + /// + /// + /// /param> + /// /param> + /// + protected string HandleObjectMediaNavigateMessage( + string request, string path, string param, OSHttpRequest httpRequest, OSHttpResponse httpResponse) + { +// m_log.DebugFormat("[MOAP]: Got ObjectMediaNavigate request [{0}]", request); + + OSDMap osd = (OSDMap)OSDParser.DeserializeLLSDXml(request); + ObjectMediaNavigateMessage omn = new ObjectMediaNavigateMessage(); + omn.Deserialize(osd); + + UUID primId = omn.PrimID; + + SceneObjectPart part = m_scene.GetSceneObjectPart(primId); + + if (null == part) + { + m_log.WarnFormat( + "[MOAP]: Received an ObjectMediaNavigateMessage for prim {0} but this doesn't exist in region {1}", + primId, m_scene.RegionInfo.RegionName); + return string.Empty; + } + + UUID agentId = default(UUID); + + lock (m_omuCapUsers) + agentId = m_omuCapUsers[path]; + + if (!m_scene.Permissions.CanInteractWithPrimMedia(agentId, part.UUID, omn.Face)) + return string.Empty; + +// m_log.DebugFormat( +// "[MOAP]: Received request to update media entry for face {0} on prim {1} {2} to {3}", +// omn.Face, part.Name, part.UUID, omn.URL); + + // If media has never been set for this prim, then just return. + if (null == part.Shape.Media) + return string.Empty; + + MediaEntry me = null; + + lock (part.Shape.Media) + me = part.Shape.Media[omn.Face]; + + // Do the same if media has not been set up for a specific face + if (null == me) + return string.Empty; + + if (me.EnableWhiteList) + { + if (!CheckUrlAgainstWhitelist(omn.URL, me.WhiteList)) + { +// m_log.DebugFormat( +// "[MOAP]: Blocking change of face {0} on prim {1} {2} to {3} since it's not on the enabled whitelist", +// omn.Face, part.Name, part.UUID, omn.URL); + + return string.Empty; + } + } + + me.CurrentURL = omn.URL; + + UpdateMediaUrl(part, agentId); + + part.ScheduleFullUpdate(); + + part.TriggerScriptChangedEvent(Changed.MEDIA); + + return OSDParser.SerializeLLSDXmlString(new OSD()); + } + + /// + /// Check that the face number is valid for the given prim. + /// + /// + /// + protected void CheckFaceParam(SceneObjectPart part, int face) + { + if (face < 0) + throw new ArgumentException("Face cannot be less than zero"); + + int maxFaces = part.GetNumberOfSides() - 1; + if (face > maxFaces) + throw new ArgumentException( + string.Format("Face argument was {0} but max is {1}", face, maxFaces)); + } + + /// + /// Update the media url of the given part + /// + /// + /// + /// The id to attach to this update. Normally, this is the user that changed the + /// texture + /// + protected void UpdateMediaUrl(SceneObjectPart part, UUID updateId) + { + if (null == part.MediaUrl) + { + // TODO: We can't set the last changer until we start tracking which cap we give to which agent id + part.MediaUrl = "x-mv:0000000000/" + updateId; + } + else + { + string rawVersion = part.MediaUrl.Substring(5, 10); + int version = int.Parse(rawVersion); + part.MediaUrl = string.Format("x-mv:{0:D10}/{1}", ++version, updateId); + } + +// m_log.DebugFormat("[MOAP]: Storing media url [{0}] in prim {1} {2}", part.MediaUrl, part.Name, part.UUID); + } + + /// + /// Check the given url against the given whitelist. + /// + /// + /// + /// true if the url matches an entry on the whitelist, false otherwise + protected bool CheckUrlAgainstWhitelist(string rawUrl, string[] whitelist) + { + Uri url = new Uri(rawUrl); + + foreach (string origWlUrl in whitelist) + { + string wlUrl = origWlUrl; + + // Deal with a line-ending wildcard + if (wlUrl.EndsWith("*")) + wlUrl = wlUrl.Remove(wlUrl.Length - 1); + +// m_log.DebugFormat("[MOAP]: Checking whitelist URL pattern {0}", origWlUrl); + + // Handle a line starting wildcard slightly differently since this can only match the domain, not the path + if (wlUrl.StartsWith("*")) + { + wlUrl = wlUrl.Substring(1); + + if (url.Host.Contains(wlUrl)) + { +// m_log.DebugFormat("[MOAP]: Whitelist URL {0} matches {1}", origWlUrl, rawUrl); + return true; + } + } + else + { + string urlToMatch = url.Authority + url.AbsolutePath; + + if (urlToMatch.StartsWith(wlUrl)) + { +// m_log.DebugFormat("[MOAP]: Whitelist URL {0} matches {1}", origWlUrl, rawUrl); + return true; + } + } + } + + return false; + } + } +} \ No newline at end of file diff --git a/OpenSim/Region/CoreModules/World/Permissions/PermissionsModule.cs b/OpenSim/Region/CoreModules/World/Permissions/PermissionsModule.cs index 1d705460c9..bc54997a0a 100644 --- a/OpenSim/Region/CoreModules/World/Permissions/PermissionsModule.cs +++ b/OpenSim/Region/CoreModules/World/Permissions/PermissionsModule.cs @@ -164,6 +164,7 @@ namespace OpenSim.Region.CoreModules.World.Permissions private Dictionary GrantYP = new Dictionary(); private IFriendsModule m_friendsModule; private IGroupsModule m_groupsModule; + private IMoapModule m_moapModule; #endregion @@ -177,7 +178,7 @@ namespace OpenSim.Region.CoreModules.World.Permissions string permissionModules = myConfig.GetString("permissionmodules", "DefaultPermissionsModule"); - List modules=new List(permissionModules.Split(',')); + List modules = new List(permissionModules.Split(',')); if (!modules.Contains("DefaultPermissionsModule")) return; @@ -249,6 +250,9 @@ namespace OpenSim.Region.CoreModules.World.Permissions m_scene.Permissions.OnDeleteUserInventory += CanDeleteUserInventory; //NOT YET IMPLEMENTED m_scene.Permissions.OnTeleport += CanTeleport; //NOT YET IMPLEMENTED + + m_scene.Permissions.OnControlPrimMedia += CanControlPrimMedia; + m_scene.Permissions.OnInteractWithPrimMedia += CanInteractWithPrimMedia; m_scene.AddCommand(this, "bypass permissions", "bypass permissions ", @@ -394,6 +398,12 @@ namespace OpenSim.Region.CoreModules.World.Permissions if (m_groupsModule == null) m_log.Warn("[PERMISSIONS]: Groups module not found, group permissions will not work"); + + m_moapModule = m_scene.RequestModuleInterface(); + + // This log line will be commented out when no longer required for debugging +// if (m_moapModule == null) +// m_log.Warn("[PERMISSIONS]: Media on a prim module not found, media on a prim permissions will not work"); } public void Close() @@ -1894,5 +1904,80 @@ namespace OpenSim.Region.CoreModules.World.Permissions } return(false); } + + private bool CanControlPrimMedia(UUID agentID, UUID primID, int face) + { +// m_log.DebugFormat( +// "[PERMISSONS]: Performing CanControlPrimMedia check with agentID {0}, primID {1}, face {2}", +// agentID, primID, face); + + if (null == m_moapModule) + return false; + + SceneObjectPart part = m_scene.GetSceneObjectPart(primID); + if (null == part) + return false; + + MediaEntry me = m_moapModule.GetMediaEntry(part, face); + + // If there is no existing media entry then it can be controlled (in this context, created). + if (null == me) + return true; + +// m_log.DebugFormat( +// "[PERMISSIONS]: Checking CanControlPrimMedia for {0} on {1} face {2} with control permissions {3}", +// agentID, primID, face, me.ControlPermissions); + + return GenericPrimMediaPermission(part, agentID, me.ControlPermissions); + } + + private bool CanInteractWithPrimMedia(UUID agentID, UUID primID, int face) + { +// m_log.DebugFormat( +// "[PERMISSONS]: Performing CanInteractWithPrimMedia check with agentID {0}, primID {1}, face {2}", +// agentID, primID, face); + + if (null == m_moapModule) + return false; + + SceneObjectPart part = m_scene.GetSceneObjectPart(primID); + if (null == part) + return false; + + MediaEntry me = m_moapModule.GetMediaEntry(part, face); + + // If there is no existing media entry then it can be controlled (in this context, created). + if (null == me) + return true; + +// m_log.DebugFormat( +// "[PERMISSIONS]: Checking CanInteractWithPrimMedia for {0} on {1} face {2} with interact permissions {3}", +// agentID, primID, face, me.InteractPermissions); + + return GenericPrimMediaPermission(part, agentID, me.InteractPermissions); + } + + private bool GenericPrimMediaPermission(SceneObjectPart part, UUID agentID, MediaPermission perms) + { +// if (IsAdministrator(agentID)) +// return true; + + if ((perms & MediaPermission.Anyone) == MediaPermission.Anyone) + return true; + + if ((perms & MediaPermission.Owner) == MediaPermission.Owner) + { + if (agentID == part.OwnerID) + return true; + } + + if ((perms & MediaPermission.Group) == MediaPermission.Group) + { + if (IsGroupMember(part.GroupID, agentID, 0)) + return true; + } + + return false; + } } -} +} \ No newline at end of file diff --git a/OpenSim/Region/Framework/Interfaces/IMoapModule.cs b/OpenSim/Region/Framework/Interfaces/IMoapModule.cs new file mode 100644 index 0000000000..24b6860742 --- /dev/null +++ b/OpenSim/Region/Framework/Interfaces/IMoapModule.cs @@ -0,0 +1,67 @@ +/* + * Copyright (c) Contributors, http://opensimulator.org/ + * See CONTRIBUTORS.TXT for a full list of copyright holders. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of the OpenSimulator Project nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +using System; +using OpenMetaverse; +using OpenSim.Region.Framework.Scenes; + +namespace OpenSim.Region.Framework.Interfaces +{ + /// + /// Provides methods from manipulating media-on-a-prim + /// + public interface IMoapModule + { + /// + /// Get the media entry for a given prim face. + /// + /// A copy of the media entry is returned rather than the original, so this can be altered at will without + /// affecting the original settings. + /// + /// + /// + MediaEntry GetMediaEntry(SceneObjectPart part, int face); + + /// + /// Set the media entry for a given prim face. + /// + /// + /// + /// + void SetMediaEntry(SceneObjectPart part, int face, MediaEntry me); + + /// + /// Clear the media entry for a given prim face. + /// + /// + /// This is the equivalent of setting a media entry of null + /// + /// + /// /param> + void ClearMediaEntry(SceneObjectPart part, int face); + } +} \ No newline at end of file diff --git a/OpenSim/Region/Framework/Scenes/EventManager.cs b/OpenSim/Region/Framework/Scenes/EventManager.cs index 9db2e4135b..0ae3146a02 100644 --- a/OpenSim/Region/Framework/Scenes/EventManager.cs +++ b/OpenSim/Region/Framework/Scenes/EventManager.cs @@ -330,10 +330,38 @@ namespace OpenSim.Region.Framework.Scenes /// If the object is being attached, then the avatarID will be present. If the object is being detached then /// the avatarID is UUID.Zero (I know, this doesn't make much sense but now it's historical). public delegate void Attach(uint localID, UUID itemID, UUID avatarID); - public event Attach OnAttach; + public event Attach OnAttach; + + /// + /// Called immediately after an object is loaded from storage. + /// + public event SceneObjectDelegate OnSceneObjectLoaded; + public delegate void SceneObjectDelegate(SceneObjectGroup so); + + /// + /// Called immediately before an object is saved to storage. + /// + /// + /// The scene object being persisted. + /// This is actually a copy of the original scene object so changes made here will be saved to storage but will not be kept in memory. + /// + /// + /// The original scene object being persisted. Changes here will stay in memory but will not be saved to storage on this save. + /// + public event SceneObjectPreSaveDelegate OnSceneObjectPreSave; + public delegate void SceneObjectPreSaveDelegate(SceneObjectGroup persistingSo, SceneObjectGroup originalSo); + + /// + /// Called when a scene object part is cloned within the region. + /// + /// + /// + /// True if the duplicate will immediately be in the scene, false otherwise + public event SceneObjectPartCopyDelegate OnSceneObjectPartCopy; + public delegate void SceneObjectPartCopyDelegate(SceneObjectPart copy, SceneObjectPart original, bool userExposed); public delegate void RegionUp(GridRegion region); - public event RegionUp OnRegionUp; + public event RegionUp OnRegionUp; public class MoneyTransferArgs : EventArgs { @@ -2013,5 +2041,68 @@ namespace OpenSim.Region.Framework.Scenes } } } + + public void TriggerOnSceneObjectLoaded(SceneObjectGroup so) + { + SceneObjectDelegate handler = OnSceneObjectLoaded; + if (handler != null) + { + foreach (SceneObjectDelegate d in handler.GetInvocationList()) + { + try + { + d(so); + } + catch (Exception e) + { + m_log.ErrorFormat( + "[EVENT MANAGER]: Delegate for TriggerOnSceneObjectLoaded failed - continuing. {0} {1}", + e.Message, e.StackTrace); + } + } + } + } + + public void TriggerOnSceneObjectPreSave(SceneObjectGroup persistingSo, SceneObjectGroup originalSo) + { + SceneObjectPreSaveDelegate handler = OnSceneObjectPreSave; + if (handler != null) + { + foreach (SceneObjectPreSaveDelegate d in handler.GetInvocationList()) + { + try + { + d(persistingSo, originalSo); + } + catch (Exception e) + { + m_log.ErrorFormat( + "[EVENT MANAGER]: Delegate for TriggerOnSceneObjectPreSave failed - continuing. {0} {1}", + e.Message, e.StackTrace); + } + } + } + } + + public void TriggerOnSceneObjectPartCopy(SceneObjectPart copy, SceneObjectPart original, bool userExposed) + { + SceneObjectPartCopyDelegate handler = OnSceneObjectPartCopy; + if (handler != null) + { + foreach (SceneObjectPartCopyDelegate d in handler.GetInvocationList()) + { + try + { + d(copy, original, userExposed); + } + catch (Exception e) + { + m_log.ErrorFormat( + "[EVENT MANAGER]: Delegate for TriggerOnSceneObjectPartCopy failed - continuing. {0} {1}", + e.Message, e.StackTrace); + } + } + } + } } -} +} \ No newline at end of file diff --git a/OpenSim/Region/Framework/Scenes/Scene.Permissions.cs b/OpenSim/Region/Framework/Scenes/Scene.Permissions.cs index a52335116c..4e80bf2e32 100644 --- a/OpenSim/Region/Framework/Scenes/Scene.Permissions.cs +++ b/OpenSim/Region/Framework/Scenes/Scene.Permissions.cs @@ -1,4 +1,4 @@ -/* +/* * Copyright (c) Contributors, http://opensimulator.org/ * See CONTRIBUTORS.TXT for a full list of copyright holders. * @@ -82,6 +82,8 @@ namespace OpenSim.Region.Framework.Scenes public delegate bool CopyUserInventoryHandler(UUID itemID, UUID userID); public delegate bool DeleteUserInventoryHandler(UUID itemID, UUID userID); public delegate bool TeleportHandler(UUID userID, Scene scene); + public delegate bool ControlPrimMediaHandler(UUID userID, UUID primID, int face); + public delegate bool InteractWithPrimMediaHandler(UUID userID, UUID primID, int face); #endregion public class ScenePermissions @@ -141,6 +143,8 @@ namespace OpenSim.Region.Framework.Scenes public event CopyUserInventoryHandler OnCopyUserInventory; public event DeleteUserInventoryHandler OnDeleteUserInventory; public event TeleportHandler OnTeleport; + public event ControlPrimMediaHandler OnControlPrimMedia; + public event InteractWithPrimMediaHandler OnInteractWithPrimMedia; #endregion #region Object Permission Checks @@ -964,5 +968,35 @@ namespace OpenSim.Region.Framework.Scenes } return true; } + + public bool CanControlPrimMedia(UUID userID, UUID primID, int face) + { + ControlPrimMediaHandler handler = OnControlPrimMedia; + if (handler != null) + { + Delegate[] list = handler.GetInvocationList(); + foreach (ControlPrimMediaHandler h in list) + { + if (h(userID, primID, face) == false) + return false; + } + } + return true; + } + + public bool CanInteractWithPrimMedia(UUID userID, UUID primID, int face) + { + InteractWithPrimMediaHandler handler = OnInteractWithPrimMedia; + if (handler != null) + { + Delegate[] list = handler.GetInvocationList(); + foreach (InteractWithPrimMediaHandler h in list) + { + if (h(userID, primID, face) == false) + return false; + } + } + return true; + } } -} +} \ No newline at end of file diff --git a/OpenSim/Region/Framework/Scenes/Scene.cs b/OpenSim/Region/Framework/Scenes/Scene.cs index 93f684c4c7..dcd7f3dc6a 100644 --- a/OpenSim/Region/Framework/Scenes/Scene.cs +++ b/OpenSim/Region/Framework/Scenes/Scene.cs @@ -1887,9 +1887,11 @@ namespace OpenSim.Region.Framework.Scenes foreach (SceneObjectGroup group in PrimsFromDB) { + EventManager.TriggerOnSceneObjectLoaded(group); + if (group.RootPart == null) { - m_log.ErrorFormat("[SCENE] Found a SceneObjectGroup with m_rootPart == null and {0} children", + m_log.ErrorFormat("[SCENE]: Found a SceneObjectGroup with m_rootPart == null and {0} children", group.Children == null ? 0 : group.Children.Count); } diff --git a/OpenSim/Region/Framework/Scenes/SceneObjectGroup.cs b/OpenSim/Region/Framework/Scenes/SceneObjectGroup.cs index 17275d0d19..e26e4aef14 100644 --- a/OpenSim/Region/Framework/Scenes/SceneObjectGroup.cs +++ b/OpenSim/Region/Framework/Scenes/SceneObjectGroup.cs @@ -1479,6 +1479,7 @@ namespace OpenSim.Region.Framework.Scenes backup_group.RootPart.ParticleSystem = RootPart.ParticleSystem; HasGroupChanged = false; + m_scene.EventManager.TriggerOnSceneObjectPreSave(backup_group, this); datastore.StoreObject(backup_group, m_scene.RegionInfo.RegionID); backup_group.ForEachPart(delegate(SceneObjectPart part) @@ -1527,6 +1528,7 @@ namespace OpenSim.Region.Framework.Scenes /// /// Duplicates this object, including operations such as physics set up and attaching to the backup event. /// + /// True if the duplicate will immediately be in the scene, false otherwise /// public SceneObjectGroup Copy(bool userExposed) { diff --git a/OpenSim/Region/Framework/Scenes/SceneObjectPart.cs b/OpenSim/Region/Framework/Scenes/SceneObjectPart.cs index 69f96273e1..3dac0ade0a 100644 --- a/OpenSim/Region/Framework/Scenes/SceneObjectPart.cs +++ b/OpenSim/Region/Framework/Scenes/SceneObjectPart.cs @@ -59,6 +59,7 @@ namespace OpenSim.Region.Framework.Scenes REGION = 256, TELEPORT = 512, REGION_RESTART = 1024, + MEDIA = 2048, ANIMATION = 16384 } @@ -321,6 +322,11 @@ namespace OpenSim.Region.Framework.Scenes protected Vector3 m_lastAcceleration; protected Vector3 m_lastAngularVelocity; protected int m_lastTerseSent; + + /// + /// Stores media texture data + /// + protected string m_mediaUrl; // TODO: Those have to be changed into persistent properties at some later point, // or sit-camera on vehicles will break on sim-crossing. @@ -965,18 +971,39 @@ namespace OpenSim.Region.Framework.Scenes TriggerScriptChangedEvent(Changed.SCALE); } } + public byte UpdateFlag { get { return m_updateFlag; } set { m_updateFlag = value; } } + + /// + /// Used for media on a prim. + /// + /// Do not change this value directly - always do it through an IMoapModule. + public string MediaUrl + { + get + { + return m_mediaUrl; + } + + set + { + m_mediaUrl = value; + + if (ParentGroup != null) + ParentGroup.HasGroupChanged = true; + } + } [XmlIgnore] public bool CreateSelected { get { return m_createSelected; } set { m_createSelected = value; } - } + } #endregion @@ -1527,6 +1554,11 @@ namespace OpenSim.Region.Framework.Scenes /// /// Duplicates this part. /// + /// + /// + /// + /// + /// True if the duplicate will immediately be in the scene, false otherwise /// public SceneObjectPart Copy(uint localID, UUID AgentID, UUID GroupID, int linkNum, bool userExposed) { @@ -1590,7 +1622,11 @@ namespace OpenSim.Region.Framework.Scenes dupe.DoPhysicsPropertyUpdate(UsePhysics, true); } - return dupe; + ParentGroup.Scene.EventManager.TriggerOnSceneObjectPartCopy(dupe, this, userExposed); + +// m_log.DebugFormat("[SCENE OBJECT PART]: Clone of {0} {1} finished", Name, UUID); + + return dupe; } protected void AssetReceived(string id, Object sender, AssetBase asset) diff --git a/OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs b/OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs index f26fc2eb2b..139b4f1db2 100644 --- a/OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs +++ b/OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs @@ -7842,6 +7842,241 @@ namespace OpenSim.Region.ScriptEngine.Shared.Api return res; } + public LSL_List llGetPrimMediaParams(int face, LSL_List rules) + { + m_host.AddScriptLPS(1); + ScriptSleep(1000); + + // LSL Spec http://wiki.secondlife.com/wiki/LlGetPrimMediaParams says to fail silently if face is invalid + // TODO: Need to correctly handle case where a face has no media (which gives back an empty list). + // Assuming silently fail means give back an empty list. Ideally, need to check this. + if (face < 0 || face > m_host.GetNumberOfSides() - 1) + return new LSL_List(); + + return GetPrimMediaParams(face, rules); + } + + private LSL_List GetPrimMediaParams(int face, LSL_List rules) + { + IMoapModule module = m_ScriptEngine.World.RequestModuleInterface(); + if (null == module) + throw new Exception("Media on a prim functions not available"); + + MediaEntry me = module.GetMediaEntry(m_host, face); + + // As per http://wiki.secondlife.com/wiki/LlGetPrimMediaParams + if (null == me) + return new LSL_List(); + + LSL_List res = new LSL_List(); + + for (int i = 0; i < rules.Length; i++) + { + int code = (int)rules.GetLSLIntegerItem(i); + + switch (code) + { + case ScriptBaseClass.PRIM_MEDIA_ALT_IMAGE_ENABLE: + // Not implemented + res.Add(new LSL_Integer(0)); + break; + + case ScriptBaseClass.PRIM_MEDIA_CONTROLS: + if (me.Controls == MediaControls.Standard) + res.Add(new LSL_Integer(ScriptBaseClass.PRIM_MEDIA_CONTROLS_STANDARD)); + else + res.Add(new LSL_Integer(ScriptBaseClass.PRIM_MEDIA_CONTROLS_MINI)); + break; + + case ScriptBaseClass.PRIM_MEDIA_CURRENT_URL: + res.Add(new LSL_String(me.CurrentURL)); + break; + + case ScriptBaseClass.PRIM_MEDIA_HOME_URL: + res.Add(new LSL_String(me.HomeURL)); + break; + + case ScriptBaseClass.PRIM_MEDIA_AUTO_LOOP: + res.Add(me.AutoLoop ? ScriptBaseClass.TRUE : ScriptBaseClass.FALSE); + break; + + case ScriptBaseClass.PRIM_MEDIA_AUTO_PLAY: + res.Add(me.AutoPlay ? ScriptBaseClass.TRUE : ScriptBaseClass.FALSE); + break; + + case ScriptBaseClass.PRIM_MEDIA_AUTO_SCALE: + res.Add(me.AutoScale ? ScriptBaseClass.TRUE : ScriptBaseClass.FALSE); + break; + + case ScriptBaseClass.PRIM_MEDIA_AUTO_ZOOM: + res.Add(me.AutoZoom ? ScriptBaseClass.TRUE : ScriptBaseClass.FALSE); + break; + + case ScriptBaseClass.PRIM_MEDIA_FIRST_CLICK_INTERACT: + res.Add(me.InteractOnFirstClick ? ScriptBaseClass.TRUE : ScriptBaseClass.FALSE); + break; + + case ScriptBaseClass.PRIM_MEDIA_WIDTH_PIXELS: + res.Add(new LSL_Integer(me.Width)); + break; + + case ScriptBaseClass.PRIM_MEDIA_HEIGHT_PIXELS: + res.Add(new LSL_Integer(me.Height)); + break; + + case ScriptBaseClass.PRIM_MEDIA_WHITELIST_ENABLE: + res.Add(me.EnableWhiteList ? ScriptBaseClass.TRUE : ScriptBaseClass.FALSE); + break; + + case ScriptBaseClass.PRIM_MEDIA_WHITELIST: + string[] urls = (string[])me.WhiteList.Clone(); + + for (int j = 0; j < urls.Length; j++) + urls[j] = Uri.EscapeDataString(urls[j]); + + res.Add(new LSL_String(string.Join(", ", urls))); + break; + + case ScriptBaseClass.PRIM_MEDIA_PERMS_INTERACT: + res.Add(new LSL_Integer((int)me.InteractPermissions)); + break; + + case ScriptBaseClass.PRIM_MEDIA_PERMS_CONTROL: + res.Add(new LSL_Integer((int)me.ControlPermissions)); + break; + } + } + + return res; + } + + public LSL_Integer llSetPrimMediaParams(int face, LSL_List rules) + { + m_host.AddScriptLPS(1); + ScriptSleep(1000); + + // LSL Spec http://wiki.secondlife.com/wiki/LlSetPrimMediaParams says to fail silently if face is invalid + // Assuming silently fail means sending back LSL_STATUS_OK. Ideally, need to check this. + // Don't perform the media check directly + if (face < 0 || face > m_host.GetNumberOfSides() - 1) + return ScriptBaseClass.LSL_STATUS_OK; + + return SetPrimMediaParams(face, rules); + } + + private LSL_Integer SetPrimMediaParams(int face, LSL_List rules) + { + IMoapModule module = m_ScriptEngine.World.RequestModuleInterface(); + if (null == module) + throw new Exception("Media on a prim functions not available"); + + MediaEntry me = module.GetMediaEntry(m_host, face); + if (null == me) + me = new MediaEntry(); + + int i = 0; + + while (i < rules.Length - 1) + { + int code = rules.GetLSLIntegerItem(i++); + + switch (code) + { + case ScriptBaseClass.PRIM_MEDIA_ALT_IMAGE_ENABLE: + me.EnableAlterntiveImage = (rules.GetLSLIntegerItem(i++) != 0 ? true : false); + break; + + case ScriptBaseClass.PRIM_MEDIA_CONTROLS: + int v = rules.GetLSLIntegerItem(i++); + if (ScriptBaseClass.PRIM_MEDIA_CONTROLS_STANDARD == v) + me.Controls = MediaControls.Standard; + else + me.Controls = MediaControls.Mini; + break; + + case ScriptBaseClass.PRIM_MEDIA_CURRENT_URL: + me.CurrentURL = rules.GetLSLStringItem(i++); + break; + + case ScriptBaseClass.PRIM_MEDIA_HOME_URL: + me.HomeURL = rules.GetLSLStringItem(i++); + break; + + case ScriptBaseClass.PRIM_MEDIA_AUTO_LOOP: + me.AutoLoop = (ScriptBaseClass.TRUE == rules.GetLSLIntegerItem(i++) ? true : false); + break; + + case ScriptBaseClass.PRIM_MEDIA_AUTO_PLAY: + me.AutoPlay = (ScriptBaseClass.TRUE == rules.GetLSLIntegerItem(i++) ? true : false); + break; + + case ScriptBaseClass.PRIM_MEDIA_AUTO_SCALE: + me.AutoScale = (ScriptBaseClass.TRUE == rules.GetLSLIntegerItem(i++) ? true : false); + break; + + case ScriptBaseClass.PRIM_MEDIA_AUTO_ZOOM: + me.AutoZoom = (ScriptBaseClass.TRUE == rules.GetLSLIntegerItem(i++) ? true : false); + break; + + case ScriptBaseClass.PRIM_MEDIA_FIRST_CLICK_INTERACT: + me.InteractOnFirstClick = (ScriptBaseClass.TRUE == rules.GetLSLIntegerItem(i++) ? true : false); + break; + + case ScriptBaseClass.PRIM_MEDIA_WIDTH_PIXELS: + me.Width = (int)rules.GetLSLIntegerItem(i++); + break; + + case ScriptBaseClass.PRIM_MEDIA_HEIGHT_PIXELS: + me.Height = (int)rules.GetLSLIntegerItem(i++); + break; + + case ScriptBaseClass.PRIM_MEDIA_WHITELIST_ENABLE: + me.EnableWhiteList = (ScriptBaseClass.TRUE == rules.GetLSLIntegerItem(i++) ? true : false); + break; + + case ScriptBaseClass.PRIM_MEDIA_WHITELIST: + string[] rawWhiteListUrls = rules.GetLSLStringItem(i++).ToString().Split(new char[] { ',' }); + List whiteListUrls = new List(); + Array.ForEach( + rawWhiteListUrls, delegate(string rawUrl) { whiteListUrls.Add(rawUrl.Trim()); }); + me.WhiteList = whiteListUrls.ToArray(); + break; + + case ScriptBaseClass.PRIM_MEDIA_PERMS_INTERACT: + me.InteractPermissions = (MediaPermission)(byte)(int)rules.GetLSLIntegerItem(i++); + break; + + case ScriptBaseClass.PRIM_MEDIA_PERMS_CONTROL: + me.ControlPermissions = (MediaPermission)(byte)(int)rules.GetLSLIntegerItem(i++); + break; + } + } + + module.SetMediaEntry(m_host, face, me); + + return ScriptBaseClass.LSL_STATUS_OK; + } + + public LSL_Integer llClearPrimMedia(LSL_Integer face) + { + m_host.AddScriptLPS(1); + ScriptSleep(1000); + + // LSL Spec http://wiki.secondlife.com/wiki/LlClearPrimMedia says to fail silently if face is invalid + // Assuming silently fail means sending back LSL_STATUS_OK. Ideally, need to check this. + // FIXME: Don't perform the media check directly + if (face < 0 || face > m_host.GetNumberOfSides() - 1) + return ScriptBaseClass.LSL_STATUS_OK; + + IMoapModule module = m_ScriptEngine.World.RequestModuleInterface(); + if (null == module) + throw new Exception("Media on a prim functions not available"); + + module.ClearMediaEntry(m_host, face); + + return ScriptBaseClass.LSL_STATUS_OK; + } + // // // The .NET definition of base 64 is: diff --git a/OpenSim/Region/ScriptEngine/Shared/Api/Interface/ILSL_Api.cs b/OpenSim/Region/ScriptEngine/Shared/Api/Interface/ILSL_Api.cs index cba46a36c7..561e3b3213 100644 --- a/OpenSim/Region/ScriptEngine/Shared/Api/Interface/ILSL_Api.cs +++ b/OpenSim/Region/ScriptEngine/Shared/Api/Interface/ILSL_Api.cs @@ -62,6 +62,7 @@ namespace OpenSim.Region.ScriptEngine.Shared.Api.Interfaces void llBreakLink(int linknum); LSL_Integer llCeil(double f); void llClearCameraParams(); + LSL_Integer llClearPrimMedia(LSL_Integer face); void llCloseRemoteDataChannel(string channel); LSL_Float llCloud(LSL_Vector offset); void llCollisionFilter(string name, string id, int accept); @@ -162,6 +163,7 @@ namespace OpenSim.Region.ScriptEngine.Shared.Api.Interfaces LSL_List llGetParcelPrimOwners(LSL_Vector pos); LSL_Integer llGetPermissions(); LSL_Key llGetPermissionsKey(); + LSL_List llGetPrimMediaParams(int face, LSL_List rules); LSL_Vector llGetPos(); LSL_List llGetPrimitiveParams(LSL_List rules); LSL_Integer llGetRegionAgentCount(); @@ -332,6 +334,7 @@ namespace OpenSim.Region.ScriptEngine.Shared.Api.Interfaces void llSetParcelMusicURL(string url); void llSetPayPrice(int price, LSL_List quick_pay_buttons); void llSetPos(LSL_Vector pos); + LSL_Integer llSetPrimMediaParams(int face, LSL_List rules); void llSetPrimitiveParams(LSL_List rules); void llSetLinkPrimitiveParamsFast(int linknum, LSL_List rules); void llSetPrimURL(string url); diff --git a/OpenSim/Region/ScriptEngine/Shared/Api/Runtime/LSL_Constants.cs b/OpenSim/Region/ScriptEngine/Shared/Api/Runtime/LSL_Constants.cs index 69f48c9f64..5da6bb9a21 100644 --- a/OpenSim/Region/ScriptEngine/Shared/Api/Runtime/LSL_Constants.cs +++ b/OpenSim/Region/ScriptEngine/Shared/Api/Runtime/LSL_Constants.cs @@ -277,6 +277,7 @@ namespace OpenSim.Region.ScriptEngine.Shared.ScriptBase public const int CHANGED_TELEPORT = 512; public const int CHANGED_REGION_RESTART = 1024; public const int CHANGED_REGION_START = 1024; //LL Changed the constant from CHANGED_REGION_RESTART + public const int CHANGED_MEDIA = 2048; public const int CHANGED_ANIMATION = 16384; public const int TYPE_INVALID = 0; public const int TYPE_INTEGER = 1; @@ -518,6 +519,41 @@ namespace OpenSim.Region.ScriptEngine.Shared.ScriptBase public const int TOUCH_INVALID_FACE = -1; public static readonly vector TOUCH_INVALID_TEXCOORD = new vector(-1.0, -1.0, 0.0); public static readonly vector TOUCH_INVALID_VECTOR = ZERO_VECTOR; + + // constants for llGetPrimMediaParams/llSetPrimMediaParams + public const int PRIM_MEDIA_ALT_IMAGE_ENABLE = 0; + public const int PRIM_MEDIA_CONTROLS = 1; + public const int PRIM_MEDIA_CURRENT_URL = 2; + public const int PRIM_MEDIA_HOME_URL = 3; + public const int PRIM_MEDIA_AUTO_LOOP = 4; + public const int PRIM_MEDIA_AUTO_PLAY = 5; + public const int PRIM_MEDIA_AUTO_SCALE = 6; + public const int PRIM_MEDIA_AUTO_ZOOM = 7; + public const int PRIM_MEDIA_FIRST_CLICK_INTERACT = 8; + public const int PRIM_MEDIA_WIDTH_PIXELS = 9; + public const int PRIM_MEDIA_HEIGHT_PIXELS = 10; + public const int PRIM_MEDIA_WHITELIST_ENABLE = 11; + public const int PRIM_MEDIA_WHITELIST = 12; + public const int PRIM_MEDIA_PERMS_INTERACT = 13; + public const int PRIM_MEDIA_PERMS_CONTROL = 14; + + public const int PRIM_MEDIA_CONTROLS_STANDARD = 0; + public const int PRIM_MEDIA_CONTROLS_MINI = 1; + + public const int PRIM_MEDIA_PERM_NONE = 0; + public const int PRIM_MEDIA_PERM_OWNER = 1; + public const int PRIM_MEDIA_PERM_GROUP = 2; + public const int PRIM_MEDIA_PERM_ANYONE = 4; + + // extra constants for llSetPrimMediaParams + public static readonly LSLInteger LSL_STATUS_OK = new LSLInteger(0); + public static readonly LSLInteger LSL_STATUS_MALFORMED_PARAMS = new LSLInteger(1000); + public static readonly LSLInteger LSL_STATUS_TYPE_MISMATCH = new LSLInteger(1001); + public static readonly LSLInteger LSL_STATUS_BOUNDS_ERROR = new LSLInteger(1002); + public static readonly LSLInteger LSL_STATUS_NOT_FOUND = new LSLInteger(1003); + public static readonly LSLInteger LSL_STATUS_NOT_SUPPORTED = new LSLInteger(1004); + public static readonly LSLInteger LSL_STATUS_INTERNAL_ERROR = new LSLInteger(1999); + public static readonly LSLInteger LSL_STATUS_WHITELIST_FAILED = new LSLInteger(2001); // Constants for default textures public const string TEXTURE_BLANK = "5748decc-f629-461c-9a36-a35a221fe21f"; diff --git a/OpenSim/Region/ScriptEngine/Shared/Api/Runtime/LSL_Stub.cs b/OpenSim/Region/ScriptEngine/Shared/Api/Runtime/LSL_Stub.cs index 3339995f66..451163fe99 100644 --- a/OpenSim/Region/ScriptEngine/Shared/Api/Runtime/LSL_Stub.cs +++ b/OpenSim/Region/ScriptEngine/Shared/Api/Runtime/LSL_Stub.cs @@ -1832,5 +1832,20 @@ namespace OpenSim.Region.ScriptEngine.Shared.ScriptBase { return m_LSL_Functions.llXorBase64StringsCorrect(str1, str2); } + + public LSL_List llGetPrimMediaParams(int face, LSL_List rules) + { + return m_LSL_Functions.llGetPrimMediaParams(face, rules); + } + + public LSL_Integer llSetPrimMediaParams(int face, LSL_List rules) + { + return m_LSL_Functions.llSetPrimMediaParams(face, rules); + } + + public LSL_Integer llClearPrimMedia(LSL_Integer face) + { + return m_LSL_Functions.llClearPrimMedia(face); + } } } diff --git a/bin/OpenMetaverse.StructuredData.XML b/bin/OpenMetaverse.StructuredData.XML index 374bc25e38..cce365625e 100644 --- a/bin/OpenMetaverse.StructuredData.XML +++ b/bin/OpenMetaverse.StructuredData.XML @@ -1,333 +1,333 @@ - - - - OpenMetaverse.StructuredData - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Uses reflection to create an SDMap from all of the SD - serializable types in an object - - Class or struct containing serializable types - An SDMap holding the serialized values from the - container object - - - - Uses reflection to deserialize member variables in an object from - an SDMap - - Reference to an object to fill with deserialized - values - Serialized values to put in the target - object - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + OpenMetaverse.StructuredData + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Uses reflection to create an SDMap from all of the SD + serializable types in an object + + Class or struct containing serializable types + An SDMap holding the serialized values from the + container object + + + + Uses reflection to deserialize member variables in an object from + an SDMap + + Reference to an object to fill with deserialized + values + Serialized values to put in the target + object + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/bin/OpenMetaverse.StructuredData.dll b/bin/OpenMetaverse.StructuredData.dll index f4992a21ea..76db137d0c 100644 Binary files a/bin/OpenMetaverse.StructuredData.dll and b/bin/OpenMetaverse.StructuredData.dll differ diff --git a/bin/OpenMetaverse.Utilities.XML b/bin/OpenMetaverse.Utilities.XML deleted file mode 100644 index 3fdf0044c0..0000000000 --- a/bin/OpenMetaverse.Utilities.XML +++ /dev/null @@ -1,98 +0,0 @@ - - - - OpenMetaverse.Utilities - - - - Amount of time to wait for the voice daemon to respond. - The value needs to stay relatively high because some of the calls - require the voice daemon to make remote queries before replying - - - - Does not appear to be working - - - - - - - Returns the new user ID or throws an exception containing the error code - The error codes can be found here: https://wiki.secondlife.com/wiki/RegAPIError - - New user account to create - The UUID of the new user account - - - - See https://secure-web6.secondlife.com/developers/third_party_reg/#service_create_user or - https://wiki.secondlife.com/wiki/RegAPIDoc for description - - - - - - - - - - - - - - - - - - - - - - Aims at the specified position, enters mouselook, presses and - releases the left mouse button, and leaves mouselook - - - Target to shoot at - - - - - Enters mouselook, presses and releases the left mouse button, and leaves mouselook - - - - - - A psuedo-realistic chat function that uses the typing sound and - animation, types at three characters per second, and randomly - pauses. This function will block until the message has been sent - - A reference to the client that will chat - The chat message to send - - - - A psuedo-realistic chat function that uses the typing sound and - animation, types at a given rate, and randomly pauses. This - function will block until the message has been sent - - A reference to the client that will chat - The chat message to send - The chat type (usually Normal, Whisper or Shout) - Characters per second rate for chatting - - - Unknown voice service level - - - Spatialized local chat - - - Remote multi-party chat - - - One-to-one and small group chat - - - diff --git a/bin/OpenMetaverse.Utilities.dll b/bin/OpenMetaverse.Utilities.dll deleted file mode 100644 index 04248beaea..0000000000 Binary files a/bin/OpenMetaverse.Utilities.dll and /dev/null differ diff --git a/bin/OpenMetaverse.XML b/bin/OpenMetaverse.XML index cdb618e0dc..6574c13650 100644 --- a/bin/OpenMetaverse.XML +++ b/bin/OpenMetaverse.XML @@ -1,22015 +1,25250 @@ - - - - OpenMetaverse - - - - - Identifier code for primitive types - - - - None - - - A Primitive - - - A Avatar - - - Linden grass - - - Linden tree - - - A primitive that acts as the source for a particle stream - - - A Linden tree - - - - Primary parameters for primitives such as Physics Enabled or Phantom - - - - Deprecated - - - Whether physics are enabled for this object - - - - - - - - - - - - - - - - - - - - - Whether this object contains an active touch script - - - - - - Whether this object can receive payments - - - Whether this object is phantom (no collisions) - - - - - - - - - - - - - - - Deprecated - - - - - - - - - - - - Deprecated - - - - - - - - - - - - - - - Server flag, will not be sent to clients. Specifies that - the object is destroyed when it touches a simulator edge - - - Server flag, will not be sent to clients. Specifies that - the object will be returned to the owner's inventory when it - touches a simulator edge - - - Server flag, will not be sent to clients. - - - Server flag, will not be sent to client. Specifies that - the object is hovering/flying - - - - - - - - - - - - - - - - Sound flags for sounds attached to primitives - - - - - - - - - - - - - - - - - - - - - - - - - - Material type for a primitive - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Used in a helper function to roughly determine prim shape - - - - - Extra parameters for primitives, these flags are for features that have - been added after the original ObjectFlags that has all eight bits - reserved already - - - - Whether this object has flexible parameters - - - Whether this object has light parameters - - - Whether this object is a sculpted prim - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Attachment points for objects on avatar bodies - - - Both InventoryObject and InventoryAttachment types can be attached - - - - Right hand if object was not previously attached - - - Chest - - - Skull - - - Left shoulder - - - Right shoulder - - - Left hand - - - Right hand - - - Left foot - - - Right foot - - - Spine - - - Pelvis - - - Mouth - - - Chin - - - Left ear - - - Right ear - - - Left eyeball - - - Right eyeball - - - Nose - - - Right upper arm - - - Right forearm - - - Left upper arm - - - Left forearm - - - Right hip - - - Right upper leg - - - Right lower leg - - - Left hip - - - Left upper leg - - - Left lower leg - - - Stomach - - - Left pectoral - - - Right pectoral - - - HUD Center position 2 - - - HUD Top-right - - - HUD Top - - - HUD Top-left - - - HUD Center - - - HUD Bottom-left - - - HUD Bottom - - - HUD Bottom-right - - - - Tree foliage types - - - - Pine1 tree - - - Oak tree - - - Tropical Bush1 - - - Palm1 tree - - - Dogwood tree - - - Tropical Bush2 - - - Palm2 tree - - - Cypress1 tree - - - Cypress2 tree - - - Pine2 tree - - - Plumeria - - - Winter pinetree1 - - - Winter Aspen tree - - - Winter pinetree2 - - - Eucalyptus tree - - - Fern - - - Eelgrass - - - Sea Sword - - - Kelp1 plant - - - Beach grass - - - Kelp2 plant - - - - Grass foliage types - - - - - - - - - - - - - - - - - - - - - - - Action associated with clicking on an object - - - - Touch object - - - Sit on object - - - Purchase object or contents - - - Pay the object - - - Open task inventory - - - Play parcel media - - - Open parcel media - - - - Particle system specific enumerators, flags and methods. - - - - - - - - - - - - - - - - - - - - - - Foliage type for this primitive. Only applicable if this - primitive is foliage - - - Unknown - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Identifies the owner if audio or a particle system is - active - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Default constructor - - - - - Packs PathTwist, PathTwistBegin, PathRadiusOffset, and PathSkew - parameters in to signed eight bit values - - Floating point parameter to pack - Signed eight bit value containing the packed parameter - - - - Unpacks PathTwist, PathTwistBegin, PathRadiusOffset, and PathSkew - parameters from signed eight bit integers to floating point values - - Signed eight bit value to unpack - Unpacked floating point value - - - - - - - - - - - - Uses basic heuristics to estimate the primitive shape - - - - Parameters used to construct a visual representation of a primitive - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Attachment point to an avatar - - - - - - - - - - - - - - - - Information on the flexible properties of a primitive - - - - - - - - - - - - - - - - - - - - - - - Default constructor - - - - - - - - - - - - - - - - - - - - - - - - Information on the light properties of a primitive - - - - - - - - - - - - - - - - - - - - Default constructor - - - - - - - - - - - - - - - - - - - - - - - - Information on the sculpt properties of a sculpted primitive - - - - - Default constructor - - - - - - - - - - - - Render inside out (inverts the normals). - - - - - Render an X axis mirror of the sculpty. - - - - - Extended properties to describe an object - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Default constructor - - - - - Set the properties that are set in an ObjectPropertiesFamily packet - - that has - been partially filled by an ObjectPropertiesFamily packet - - - - Complete structure for the particle system - - - - Particle Flags - There appears to be more data packed in to this area - for many particle systems. It doesn't appear to be flag values - and serialization breaks unless there is a flag for every - possible bit so it is left as an unsigned integer - - - pattern of particles - - - A representing the maximimum age (in seconds) particle will be displayed - Maximum value is 30 seconds - - - A representing the number of seconds, - from when the particle source comes into view, - or the particle system's creation, that the object will emits particles; - after this time period no more particles are emitted - - - A in radians that specifies where particles will not be created - - - A in radians that specifies where particles will be created - - - A representing the number of seconds between burts. - - - A representing the number of meters - around the center of the source where particles will be created. - - - A representing in seconds, the minimum speed between bursts of new particles - being emitted - - - A representing in seconds the maximum speed of new particles being emitted. - - - A representing the maximum number of particles emitted per burst - - - A which represents the velocity (speed) from the source which particles are emitted - - - A which represents the Acceleration from the source which particles are emitted - - - The Key of the texture displayed on the particle - - - The Key of the specified target object or avatar particles will follow - - - Flags of particle from - - - Max Age particle system will emit particles for - - - The the particle has at the beginning of its lifecycle - - - The the particle has at the ending of its lifecycle - - - A that represents the starting X size of the particle - Minimum value is 0, maximum value is 4 - - - A that represents the starting Y size of the particle - Minimum value is 0, maximum value is 4 - - - A that represents the ending X size of the particle - Minimum value is 0, maximum value is 4 - - - A that represents the ending Y size of the particle - Minimum value is 0, maximum value is 4 - - - - Decodes a byte[] array into a ParticleSystem Object - - ParticleSystem object - Start position for BitPacker - - - - Generate byte[] array from particle data - - Byte array - - - - Particle source pattern - - - - None - - - Drop particles from source position with no force - - - "Explode" particles in all directions - - - Particles shoot across a 2D area - - - Particles shoot across a 3D Cone - - - Inverse of AngleCone (shoot particles everywhere except the 3D cone defined - - - - Particle Data Flags - - - - None - - - Interpolate color and alpha from start to end - - - Interpolate scale from start to end - - - Bounce particles off particle sources Z height - - - velocity of particles is dampened toward the simulators wind - - - Particles follow the source - - - Particles point towards the direction of source's velocity - - - Target of the particles - - - Particles are sent in a straight line - - - Particles emit a glow - - - used for point/grab/touch - - - - Particle Flags Enum - - - - None - - - Acceleration and velocity for particles are - relative to the object rotation - - - Particles use new 'correct' angle parameters - - - - Texture animation mode - - - - Disable texture animation - - - Enable texture animation - - - Loop when animating textures - - - Animate in reverse direction - - - Animate forward then reverse - - - Slide texture smoothly instead of frame-stepping - - - Rotate texture instead of using frames - - - Scale texture instead of using frames - - - - A single textured face. Don't instantiate this class yourself, use the - methods in TextureEntry - - - - - Contains the definition for individual faces - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - In the future this will specify whether a webpage is - attached to this face - - - - - - - Represents all of the texturable faces for an object - - Grid objects have infinite faces, with each face - using the properties of the default face unless set otherwise. So if - you have a TextureEntry with a default texture uuid of X, and face 18 - has a texture UUID of Y, every face would be textured with X except for - face 18 that uses Y. In practice however, primitives utilize a maximum - of nine faces - - - - - - - - - - Constructor that takes a default texture UUID - - Texture UUID to use as the default texture - - - - Constructor that takes a TextureEntryFace for the - default face - - Face to use as the default face - - - - Constructor that creates the TextureEntry class from a byte array - - Byte array containing the TextureEntry field - Starting position of the TextureEntry field in - the byte array - Length of the TextureEntry field, in bytes - - - - This will either create a new face if a custom face for the given - index is not defined, or return the custom face for that index if - it already exists - - The index number of the face to create or - retrieve - A TextureEntryFace containing all the properties for that - face - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Controls the texture animation of a particular prim - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Abstract base for rendering plugins - - - - - Generates a basic mesh structure from a primitive - - Primitive to generate the mesh from - Level of detail to generate the mesh at - The generated mesh - - - - Generates a a series of faces, each face containing a mesh and - metadata - - Primitive to generate the mesh from - Level of detail to generate the mesh at - The generated mesh - - - - Apply texture coordinate modifications from a - to a list of vertices - - Vertex list to modify texture coordinates for - Center-point of the face - Face texture parameters - - - - Avatar profile flags - - - - - Represents an avatar (other than your own) - - - - Groups that this avatar is a member of - - - Positive and negative ratings - - - Avatar properties including about text, profile URL, image IDs and - publishing settings - - - Avatar interests including spoken languages, skills, and "want to" - choices - - - Movement control flags for avatars. Typically not set or used by - clients. To move your avatar, use Client.Self.Movement instead - - - - Default constructor - - - - First name - - - Last name - - - Full name - - - Active group - - - - Positive and negative ratings - - - - Positive ratings for Behavior - - - Negative ratings for Behavior - - - Positive ratings for Appearance - - - Negative ratings for Appearance - - - Positive ratings for Building - - - Negative ratings for Building - - - Positive ratings given by this avatar - - - Negative ratings given by this avatar - - - - Avatar properties including about text, profile URL, image IDs and - publishing settings - - - - First Life about text - - - First Life image ID - - - - - - - - - - - - - - - Profile image ID - - - Flags of the profile - - - Web URL for this profile - - - Should this profile be published on the web - - - Avatar Online Status - - - Is this a mature profile - - - - - - - - - - Avatar interests including spoken languages, skills, and "want to" - choices - - - - Languages profile field - - - - - - - - - - - - - - - - Starts a thread that keeps the daemon running - - - - - - - Stops the daemon and the thread keeping it running - - - - - - - - - - - - - This is used to get a list of audio devices that can be used for capture (input) of voice. - - - - - - This is used to get a list of audio devices that can be used for render (playback) of voice. - - - - - This command is used to select the render device. - - The name of the device as returned by the Aux.GetRenderDevices command. - - - - This command is used to select the capture device. - - The name of the device as returned by the Aux.GetCaptureDevices command. - - - - This command is used to start the audio capture process which will cause - AuxAudioProperty Events to be raised. These events can be used to display a - microphone VU meter for the currently selected capture device. This command - should not be issued if the user is on a call. - - (unused but required) - - - - - This command is used to stop the audio capture process. - - - - - - This command is used to set the mic volume while in the audio tuning process. - Once an acceptable mic level is attained, the application must issue a - connector set mic volume command to have that level be used while on voice - calls. - - the microphone volume (-100 to 100 inclusive) - - - - - This command is used to set the speaker volume while in the audio tuning - process. Once an acceptable speaker level is attained, the application must - issue a connector set speaker volume command to have that level be used while - on voice calls. - - the speaker volume (-100 to 100 inclusive) - - - - - This is used to initialize and stop the Connector as a whole. The Connector - Create call must be completed successfully before any other requests are made - (typically during application initialization). The shutdown should be called - when the application is shutting down to gracefully release resources - - A string value indicting the Application name - URL for the management server - LoggingSettings - - - - - - Shutdown Connector -- Should be called when the application is shutting down - to gracefully release resources - - Handle returned from successful Connector ‘create’ request - - - - Mute or unmute the microphone - - Handle returned from successful Connector ‘create’ request - true (mute) or false (unmute) - - - - Mute or unmute the speaker - - Handle returned from successful Connector ‘create’ request - true (mute) or false (unmute) - - - - Set microphone volume - - Handle returned from successful Connector ‘create’ request - The level of the audio, a number between -100 and 100 where - 0 represents ‘normal’ speaking volume - - - - Set local speaker volume - - Handle returned from successful Connector ‘create’ request - The level of the audio, a number between -100 and 100 where - 0 represents ‘normal’ speaking volume - - - - Create a Session - Sessions typically represent a connection to a media session with one or more - participants. This is used to generate an ‘outbound’ call to another user or - channel. The specifics depend on the media types involved. A session handle is - required to control the local user functions within the session (or remote - users if the current account has rights to do so). Currently creating a - session automatically connects to the audio media, there is no need to call - Session.Connect at this time, this is reserved for future use. - - Handle returned from successful Connector ‘create’ request - This is the URI of the terminating point of the session (ie who/what is being called) - This is the display name of the entity being called (user or channel) - Only needs to be supplied when the target URI is password protected - This indicates the format of the password as passed in. This can either be - “ClearText” or “SHA1UserName”. If this element does not exist, it is assumed to be “ClearText”. If it is - “SHA1UserName”, the password as passed in is the SHA1 hash of the password and username concatenated together, - then base64 encoded, with the final “=” character stripped off. - - - - - - - Used to accept a call - - SessionHandle such as received from SessionNewEvent - "default" - - - - - This command is used to start the audio render process, which will then play - the passed in file through the selected audio render device. This command - should not be issued if the user is on a call. - - The fully qualified path to the sound file. - True if the file is to be played continuously and false if it is should be played once. - - - - - This command is used to stop the audio render process. - - The fully qualified path to the sound file issued in the start render command. - - - - - This is used to ‘end’ an established session (i.e. hang-up or disconnect). - - Handle returned from successful Session ‘create’ request or a SessionNewEvent - - - - - Set the combined speaking and listening position in 3D space. - There appears to be no response to this request. - - Handle returned from successful Session ‘create’ request or a SessionNewEvent - Speaking position - Listening position - - - - - Set User Volume for a particular user. Does not affect how other users hear that user. - - Handle returned from successful Session ‘create’ request or a SessionNewEvent - - The level of the audio, a number between -100 and 100 where 0 represents ‘normal’ speaking volume - - - - - This is used to login a specific user account(s). It may only be called after - Connector initialization has completed successfully - - Handle returned from successful Connector ‘create’ request - User's account name - User's account password - Values may be “AutoAnswer” or “VerifyAnswer” - "" - This is an integer that specifies how often - the daemon will send participant property events while in a channel. If this is not set - the default will be “on state change”, which means that the events will be sent when - the participant starts talking, stops talking, is muted, is unmuted. - The valid values are: - 0 – Never - 5 – 10 times per second - 10 – 5 times per second - 50 – 1 time per second - 100 – on participant state change (this is the default) - false - - - - - This is used to logout a user session. It should only be called with a valid AccountHandle. - - Handle returned from successful Connector ‘login’ request - - - - Response to Session.Create request - - - Response to Session.Connect request - - - Response to Session.RenderAudioStart request - - - Response to Session.RenderAudioStop request - - - Response to Session.Terminate request - - - Response to Session.SetParticipantVolumeForMe request - - - Sent when an incoming session occurs - - - Sent for specific Session state changes (connected, disconnected) - - - Sent for specific Participant state changes (new participants, dropped participants) - - - Sent for specific Participant Property changes (IsSpeaking, Volume, Energy, etc.) - - - - - - Response to Connector.Create request - - - Response to Connector.InitiateShutdown request - - - Response to Connector.MuteLocalMic request - - - Response to Connector.MuteLocalSpeaker request - - - Response to Connector.SetLocalMicVolume request - - - Response to Connector.SetLocalSpeakerVolume request - - - Response to Aux.GetCaptureDevices request - - - Response to Aux.GetRenderDevices request - - - Response to Aux.SetRenderDevice request - - - Response to Aux.SetCaptureDevice request - - - Response to Aux.CaptureAudioStart request - - - Response to Aux.CaptureAudioStop request - - - Response to Aux.SetMicLevel request - - - Response to Aux.SetSpeakerLevel request - - - Audio Properties Events are sent after audio capture is started. - These events are used to display a microphone VU meter - - - Response to Account.Login request - - - Response to Account.Logout request - - - This event message is sent whenever the login state of the - particular Account has transitioned from one value to another - - - Enable logging - - - The folder where any logs will be created - - - This will be prepended to beginning of each log file - - - The suffix or extension to be appended to each log file - - - - 0: NONE - No logging - 1: ERROR - Log errors only - 2: WARNING - Log errors and warnings - 3: INFO - Log errors, warnings and info - 4: DEBUG - Log errors, warnings, info and debug - - - - - Constructor for default logging settings - - - - Response to Session.Create request - - - Response to Session.Connect request - - - Response to Session.RenderAudioStart request - - - Response to Session.RenderAudioStop request - - - Response to Session.Terminate request - - - Response to Session.SetParticipantVolumeForMe request - - - - Audio Properties Events are sent after audio capture is started. These events are used to display a microphone VU meter - - True if voice is detected on the microphone - audio energy, from 0 to 1 - current mic volume - currently unimplemented, and always 0 - - - Positional vector of the users position - - - Velocity vector of the position - - - At Orientation (X axis) of the position - - - Up Orientation (Y axis) of the position - - - Left Orientation (Z axis) of the position - - - - A Wrapper around openjpeg to encode and decode images to and from byte arrays - - - - TGA Header size - - - OpenJPEG is not threadsafe, so this object is used to lock - during calls into unmanaged code - - - - Encode a object into a byte array - - The object to encode - true to enable lossless conversion, only useful for small images ie: sculptmaps - A byte array containing the encoded Image object - - - - Encode a object into a byte array - - The object to encode - a byte array of the encoded image - - - - Decode JPEG2000 data to an and - - - JPEG2000 encoded data - ManagedImage object to decode to - Image object to decode to - True if the decode succeeds, otherwise false - - - - - - - - - - - - - - - - - - - - - Encode a object into a byte array - - The source object to encode - true to enable lossless decoding - A byte array containing the source Bitmap object - - - - Defines the beginning and ending file positions of a layer in an - LRCP-progression JPEG2000 file - - - - - This structure is used to marshal both encoded and decoded images. - MUST MATCH THE STRUCT IN dotnet.h! - - - - - Information about a single packet in a JPEG2000 stream - - - - Packet start position - - - Packet header end position - - - Packet end position - - - - Type of gesture step - - - - - Base class for gesture steps - - - - - Retururns what kind of gesture step this is - - - - - Describes animation step of a gesture - - - - - If true, this step represents start of animation, otherwise animation stop - - - - - Animation asset - - - - - Animation inventory name - - - - - Returns what kind of gesture step this is - - - - - Describes sound step of a gesture - - - - - Sound asset - - - - - Sound inventory name - - - - - Returns what kind of gesture step this is - - - - - Describes sound step of a gesture - - - - - Text to output in chat - - - - - Returns what kind of gesture step this is - - - - - Describes sound step of a gesture - - - - - If true in this step we wait for all animations to finish - - - - - If true gesture player should wait for the specified amount of time - - - - - Time in seconds to wait if WaitForAnimation is false - - - - - Returns what kind of gesture step this is - - - - - Describes the final step of a gesture - - - - - Returns what kind of gesture step this is - - - - - Represents a sequence of animations, sounds, and chat actions - - - - - Base class for all Asset types - - - - A byte array containing the raw asset data - - - True if the asset it only stored on the server temporarily - - - A unique ID - - - - Construct a new Asset object - - - - - Construct a new Asset object - - A unique specific to this asset - A byte array containing the raw asset data - - - - Regenerates the AssetData byte array from the properties - of the derived class. - - - - - Decodes the AssetData, placing it in appropriate properties of the derived - class. - - True if the asset decoding succeeded, otherwise false - - - The assets unique ID - - - - The "type" of asset, Notecard, Animation, etc - - - - - Keyboard key that triggers the gestyre - - - - - Modifier to the trigger key - - - - - String that triggers playing of the gesture sequence - - - - - Text that replaces trigger in chat once gesture is triggered - - - - - Sequence of gesture steps - - - - - Constructs guesture asset - - - - - Constructs guesture asset - - A unique specific to this asset - A byte array containing the raw asset data - - - - Encodes gesture asset suitable for uplaod - - - - - Decodes gesture assset into play sequence - - - - - - Returns asset type - - - - - Class for controlling various system settings. - - Some values are readonly because they affect things that - happen when the GridClient object is initialized, so changing them at - runtime won't do any good. Non-readonly values may affect things that - happen at login or dynamically - - - Main grid login server - - - Beta grid login server - - - - InventoryManager requests inventory information on login, - GridClient initializes an Inventory store for main inventory. - - - - - InventoryManager requests library information on login, - GridClient initializes an Inventory store for the library. - - - - Number of milliseconds before an asset transfer will time - out - - - Number of milliseconds between sending pings to each sim - - - Number of milliseconds between sending camera updates - - - Number of milliseconds between updating the current - positions of moving, non-accelerating and non-colliding objects - - - Millisecond interval between ticks, where all ACKs are - sent out and the age of unACKed packets is checked - - - The initial size of the packet inbox, where packets are - stored before processing - - - Maximum size of packet that we want to send over the wire - - - The maximum value of a packet sequence number before it - rolls over back to one - - - The maximum size of the sequence number archive, used to - check for resent and/or duplicate packets - - - The relative directory where external resources are kept - - - Login server to connect to - - - IP Address the client will bind to - - - Use XML-RPC Login or LLSD Login, default is XML-RPC Login - - - Number of milliseconds before a teleport attempt will time - out - - - Number of milliseconds before NetworkManager.Logout() will - time out - - - Number of milliseconds before a CAPS call will time out - Setting this too low will cause web requests time out and - possibly retry repeatedly - - - Number of milliseconds for xml-rpc to timeout - - - Milliseconds before a packet is assumed lost and resent - - - Milliseconds without receiving a packet before the - connection to a simulator is assumed lost - - - Milliseconds to wait for a simulator info request through - the grid interface - - - Maximum number of queued ACKs to be sent before SendAcks() - is forced - - - Network stats queue length (seconds) - - - Enable to process packets synchronously, where all of the - callbacks for each packet must return before the next packet is - processed - This is an experimental feature and is not completely - reliable yet. Ideally it would reduce context switches and thread - overhead, but several calls currently block for a long time and - would need to be rewritten as asynchronous code before this is - feasible - - - Enable/disable storing terrain heightmaps in the - TerrainManager - - - Enable/disable sending periodic camera updates - - - Enable/disable automatically setting the bandwidth throttle - after connecting to each simulator - The default throttle uses the equivalent of the maximum - bandwidth setting in the official client. If you do not set a - throttle your connection will by default be throttled well below - the minimum values and you may experience connection problems - - - Enable/disable the sending of pings to monitor lag and - packet loss - - - Should we connect to multiple sims? This will allow - viewing in to neighboring simulators and sim crossings - (Experimental) - - - If true, all object update packets will be decoded in to - native objects. If false, only updates for our own agent will be - decoded. Registering an event handler will force objects for that - type to always be decoded. If this is disabled the object tracking - will have missing or partial prim and avatar information - - - If true, when a cached object check is received from the - server the full object info will automatically be requested - - - Whether to establish connections to HTTP capabilities - servers for simulators - - - Whether to decode sim stats - - - The capabilities servers are currently designed to - periodically return a 502 error which signals for the client to - re-establish a connection. Set this to true to log those 502 errors - - - If true, any reference received for a folder or item - the library is not aware of will automatically be fetched - - - If true, and SEND_AGENT_UPDATES is true, - AgentUpdate packets will continuously be sent out to give the bot - smoother movement and autopiloting - - - If true, currently visible avatars will be stored - in dictionaries inside Simulator.ObjectAvatars. - If false, a new Avatar or Primitive object will be created - each time an object update packet is received - - - If true, currently visible avatars will be stored - in dictionaries inside Simulator.ObjectPrimitives. - If false, a new Avatar or Primitive object will be created - each time an object update packet is received - - - If true, position and velocity will periodically be - interpolated (extrapolated, technically) for objects and - avatars that are being tracked by the library. This is - necessary to increase the accuracy of speed and position - estimates for simulated objects - - - If true, parcel details will be stored in the - Simulator.Parcels dictionary as they are received - - - - If true, an incoming parcel properties reply will automatically send - a request for the parcel access list - - - - - if true, an incoming parcel properties reply will automatically send - a request for the traffic count. - - - - - If true, images, and other assets downloaded from the server - will be cached in a local directory - - - - Path to store cached texture data - - - Maximum size cached files are allowed to take on disk (bytes) - - - Default color used for viewer particle effects - - - Maximum number of times to resend a failed packet - - - Throttle outgoing packet rate - - - The maximum number of concurrent texture downloads allowed - Increasing this number will not necessarily increase texture retrieval times due to - simulator throttles - - - - The Refresh timer inteval is used to set the delay between checks for stalled texture downloads - - This is a static variable which applies to all instances - - - - Textures taking longer than this value will be flagged as timed out and removed from the pipeline - - - - - Get or set the minimum log level to output to the console by default - - If the library is not compiled with DEBUG defined and this level is set to DEBUG - You will get no output on the console. This behavior can be overriden by creating - a logger configuration file for log4net - - - - Attach avatar names to log messages - - - Log packet retransmission info - - - Constructor - Reference to a GridClient object - - - - Gets the cost of uploading an asset to the grid - - - - - - Cost of uploading an asset - Read-only since this value is dynamically fetched at login - - - - Return a decoded capabilities message as a strongly typed object - - A string containing the name of the capabilities message key - An to decode - A strongly typed object containing the decoded information from the capabilities message, or null - if no existing Message object exists for the specified event - - - - Sent to the client to indicate a teleport request has completed - - - - - Interface requirements for Messaging system - - - - The of the agent - - - - - - The simulators handle the agent teleported to - - - A Uri which contains a list of Capabilities the simulator supports - - - Indicates the level of access required - to access the simulator, or the content rating, or the simulators - map status - - - The IP Address of the simulator - - - The UDP Port the simulator will listen for UDP traffic on - - - Status flags indicating the state of the Agent upon arrival, Flying, etc. - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Sent to the viewer when a neighboring simulator is requesting the agent make a connection to it. - - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A message sent to the client which indicates a teleport request has failed - and contains some information on why it failed - - - - - - - A string key of the reason the teleport failed e.g. CouldntTPCloser - Which could be used to look up a value in a dictionary or enum - - - The of the Agent - - - A string human readable message containing the reason - An example: Could not teleport closer to destination - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Contains a list of prim owner information for a specific parcel in a simulator - - - A Simulator will always return at least 1 entry - If agent does not have proper permission the OwnerID will be UUID.Zero - If agent does not have proper permission OR there are no primitives on parcel - the DataBlocksExtended map will not be sent from the simulator - - - - An Array of objects - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Prim ownership information for a specified owner on a single parcel - - - - The of the prim owner, - UUID.Zero if agent has no permission to view prim owner information - - - The total number of prims - - - True if the OwnerID is a - - - True if the owner is online - This is no longer used by the LL Simulators - - - The date the most recent prim was rezzed - - - - The details of a single parcel in a region, also contains some regionwide globals - - - - Simulator-local ID of this parcel - - - Maximum corner of the axis-aligned bounding box for this - parcel - - - Minimum corner of the axis-aligned bounding box for this - parcel - - - Total parcel land area - - - - - - Key of authorized buyer - - - Bitmap describing land layout in 4x4m squares across the - entire region - - - - - - Date land was claimed - - - Appears to always be zero - - - Parcel Description - - - - - - - - - Total number of primitives owned by the parcel group on - this parcel - - - Whether the land is deeded to a group or not - - - - - - Maximum number of primitives this parcel supports - - - The Asset UUID of the Texture which when applied to a - primitive will display the media - - - A URL which points to any Quicktime supported media type - - - A byte, if 0x1 viewer should auto scale media to fit object - - - URL For Music Stream - - - Parcel Name - - - Autoreturn value in minutes for others' objects - - - - - - Total number of other primitives on this parcel - - - UUID of the owner of this parcel - - - Total number of primitives owned by the parcel owner on - this parcel - - - - - - How long is pass valid for - - - Price for a temporary pass - - - - - - - - - - - - This field is no longer used - - - The result of a request for parcel properties - - - Sale price of the parcel, only useful if ForSale is set - The SalePrice will remain the same after an ownership - transfer (sale), so it can be used to see the purchase price after - a sale if the new owner has not changed it - - - - Number of primitives your avatar is currently - selecting and sitting on in this parcel - - - - - - - - A number which increments by 1, starting at 0 for each ParcelProperties request. - Can be overriden by specifying the sequenceID with the ParcelPropertiesRequest being sent. - a Negative number indicates the action in has occurred. - - - - Maximum primitives across the entire simulator - - - Total primitives across the entire simulator - - - - - - Key of parcel snapshot - - - Parcel ownership status - - - Total number of primitives on this parcel - - - - - - - - - TRUE of region denies access to age unverified users - - - A description of the media - - - An Integer which represents the height of the media - - - An integer which represents the width of the media - - - A boolean, if true the viewer should loop the media - - - A string which contains the mime type of the media - - - true to obscure (hide) media url - - - true to obscure (hide) music url - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - A message sent from the viewer to the simulator to updated a specific parcels settings - - - The of the agent authorized to purchase this - parcel of land or a NULL if the sale is authorized to anyone - - - true to enable auto scaling of the parcel media - - - The category of this parcel used when search is enabled to restrict - search results - - - A string containing the description to set - - - The of the which allows for additional - powers and restrictions. - - - The which specifies how avatars which teleport - to this parcel are handled - - - The LocalID of the parcel to update settings on - - - A string containing the description of the media which can be played - to visitors - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Deserialize the message - - An containing the data - - - - Serialize the object - - An containing the objects data - - - Base class used for the RemoteParcelRequest message - - - - A message sent from the viewer to the simulator to request information - on a remote parcel - - - - Local sim position of the parcel we are looking up - - - Region handle of the parcel we are looking up - - - Region of the parcel we are looking up - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A message sent from the simulator to the viewer in response to a - which will contain parcel information - - - - The grid-wide unique parcel ID - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A message containing a request for a remote parcel from a viewer, or a response - from the simulator to that request - - - - The request or response details block - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A message sent from the simulator to an agent which contains - the groups the agent is in - - - - The Agent receiving the message - - - An array containing information - for each the agent is a member of - - - An array containing information - for each the agent is a member of - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - Group Details specific to the agent - - - true of the agent accepts group notices - - - The agents tier contribution to the group - - - The Groups - - - The of the groups insignia - - - The name of the group - - - The aggregate permissions the agent has in the group for all roles the agent - is assigned - - - An optional block containing additional agent specific information - - - true of the agent allows this group to be - listed in their profile - - - - A message sent from the viewer to the simulator which - specifies the language and permissions for others to detect - the language specified - - - - A string containng the default language - to use for the agent - - - true of others are allowed to - know the language setting - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - An EventQueue message sent from the simulator to an agent when the agent - leaves a group - - - - - An Array containing the AgentID and GroupID - - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - An object containing the Agents UUID, and the Groups UUID - - - The ID of the Agent leaving the group - - - The GroupID the Agent is leaving - - - Base class for Asset uploads/results via Capabilities - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A message sent from the viewer to the simulator to request a temporary upload capability - which allows an asset to be uploaded - - - - The request state (Always "upload") - - - The Capability URL sent by the simulator to upload the baked texture to - - - - A message sent from the simulator that will inform the agent the upload is complete, - and the UUID of the uploaded asset - - - - The request state (Always "complete") - - - The uploaded texture asset ID - - - - A message sent from the viewer to the simulator to request a temporary - capability URI which is used to upload an agents baked appearance textures - - - - Object containing request or response - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A message sent from the simulator which indicates the minimum version required for - using voice chat - - - - Major Version Required - - - Minor version required - - - The name of the region sending the version requrements - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A message sent from the simulator to the viewer containing the - voice server URI - - - - The Parcel ID which the voice server URI applies - - - The name of the region - - - A uri containing the server/channel information - which the viewer can utilize to participate in voice conversations - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - - - - - - - - - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A message sent by the viewer to the simulator to request a temporary - capability for a script contained with in a Tasks inventory to be updated - - - - Object containing request or response - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A message sent from the simulator to the viewer to indicate - a Tasks scripts status. - - - - The Asset ID of the script - - - True of the script is compiled/ran using the mono interpreter, false indicates it - uses the older less efficient lsl2 interprter - - - The Task containing the scripts - - - true of the script is in a running state - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A message containing the request/response used for updating a gesture - contained with an agents inventory - - - - Object containing request or response - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A message request/response which is used to update a notecard contained within - a tasks inventory - - - - The of the Task containing the notecard asset to update - - - The notecard assets contained in the tasks inventory - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A reusable class containing a message sent from the viewer to the simulator to request a temporary uploader capability - which is used to update an asset in an agents inventory - - - - - The Notecard AssetID to replace - - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A message containing the request/response used for updating a notecard - contained with an agents inventory - - - - Object containing request or response - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A message sent from the simulator to the viewer which indicates - an error occurred while attempting to update a script in an agents or tasks - inventory - - - - true of the script was successfully compiled by the simulator - - - The state of the request - - - A string containing the error which occured while trying - to update the script - - - A new AssetID assigned to the script - - - - A message sent from the viewer to the simulator - requesting the update of an existing script contained - within a tasks inventory - - - - if true, set the script mode to running - - - The scripts InventoryItem ItemID to update - - - A lowercase string containing either "mono" or "lsl2" which - specifies the script is compiled and ran on the mono runtime, or the older - lsl runtime - - - The tasks which contains the script to update - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A message containing either the request or response used in updating a script inside - a tasks inventory - - - - Object containing request or response - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Response from the simulator to notify the viewer the upload is completed, and - the UUID of the script asset and its compiled status - - - - The request state (Always "complete") - - - The uploaded texture asset ID - - - true of the script was compiled successfully - - - - A message sent from a viewer to the simulator requesting a temporary uploader capability - used to update a script contained in an agents inventory - - - - The existing asset if of the script in the agents inventory to replace - - - The language of the script - Defaults to lsl version 2, "mono" might be another possible option - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A message containing either the request or response used in updating a script inside - an agents inventory - - - - Object containing request or response - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A message sent from the simulator to the viewer which contains an array of map images and their grid coordinates - - - - - - - An array containing LayerData items - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A n object containing map location details - - - - The Asset ID of the regions tile overlay - - - The grid location of the southern border of the map tile - - - The grid location of the western border of the map tile - - - The grid location of the eastern border of the map tile - - - The grid location of the northern border of the map tile - - - - New as of 1.23 RC1, no details yet. - - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - A string containing the method used - - - - A request sent from an agent to the Simulator to begin a new conference. - Contains a list of Agents which will be included in the conference - - - - An array containing the of the agents invited to this conference - - - The conferences Session ID - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A moderation request sent from a conference moderator - Contains an agent and an optional action to take - - - - The Session ID - - - - - - A list containing Key/Value pairs, known valid values: - key: text value: true/false - allow/disallow specified agents ability to use text in session - key: voice value: true/false - allow/disallow specified agents ability to use voice in session - - "text" or "voice" - - - - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - A message sent from the agent to the simulator which tells the - simulator we've accepted a conference invitation - - - - The conference SessionID - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - Key of sender - - - Name of sender - - - Key of destination avatar - - - ID of originating estate - - - Key of originating region - - - Coordinates in originating region - - - Instant message type - - - Group IM session toggle - - - Key of IM session, for Group Messages, the groups UUID - - - Timestamp of the instant message - - - Instant message text - - - Whether this message is held for offline avatars - - - Context specific packed data - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Sent from the simulator to the viewer. - - When an agent initially joins a session the AgentUpdatesBlock object will contain a list of session members including - a boolean indicating they can use voice chat in this session, a boolean indicating they are allowed to moderate - this session, and lastly a string which indicates another agent is entering the session with the Transition set to "ENTER" - - During the session lifetime updates on individuals are sent. During the update the booleans sent during the initial join are - excluded with the exception of the Transition field. This indicates a new user entering or exiting the session with - the string "ENTER" or "LEAVE" respectively. - - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - An EventQueue message sent when the agent is forcibly removed from a chatterbox session - - - - - A string containing the reason the agent was removed - - - - - The ChatterBoxSession's SessionID - - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - - - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Serialize the object - - An containing the objects data - - - - Deserialize the message - - An containing the data - - - - Constants for the archiving module - - - - - The location of the archive control file - - - - - Path for the assets held in an archive - - - - - Path for the prims file - - - - - Path for terrains. Technically these may be assets, but I think it's quite nice to split them out. - - - - - Path for region settings. - - - - - The character the separates the uuid from extension information in an archived asset filename - - - - - Extensions used for asset types in the archive - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - The ObservableDictionary class is used for storing key/value pairs. It has methods for firing - events to subscribers when items are added, removed, or changed. - - Key - Value - - - - A dictionary of callbacks to fire when specified action occurs - - - - - Register a callback to be fired when an action occurs - - The action - The callback to fire - - - - Unregister a callback - - The action - The callback to fire - - - - - - - - - - Internal dictionary that this class wraps around. Do not - modify or enumerate the contents of this dictionary without locking - - - - Initializes a new instance of the Class - with the specified key/value, has the default initial capacity. - - - - // initialize a new ObservableDictionary named testDict with a string as the key and an int as the value. - public ObservableDictionary<string, int> testDict = new ObservableDictionary<string, int>(); - - - - - - Initializes a new instance of the Class - with the specified key/value, With its initial capacity specified. - - Initial size of dictionary - - - // initialize a new ObservableDictionary named testDict with a string as the key and an int as the value, - // initially allocated room for 10 entries. - public ObservableDictionary<string, int> testDict = new ObservableDictionary<string, int>(10); - - - - - - Try to get entry from the with specified key - - Key to use for lookup - Value returned - if specified key exists, if not found - - - // find your avatar using the Simulator.ObjectsAvatars ObservableDictionary: - Avatar av; - if (Client.Network.CurrentSim.ObjectsAvatars.TryGetValue(Client.Self.AgentID, out av)) - Console.WriteLine("Found Avatar {0}", av.Name); - - - - - - - Finds the specified match. - - The match. - Matched value - - - // use a delegate to find a prim in the ObjectsPrimitives ObservableDictionary - // with the ID 95683496 - uint findID = 95683496; - Primitive findPrim = sim.ObjectsPrimitives.Find( - delegate(Primitive prim) { return prim.ID == findID; }); - - - - - Find All items in an - return matching items. - a containing found items. - - Find All prims within 20 meters and store them in a List - - int radius = 20; - List<Primitive> prims = Client.Network.CurrentSim.ObjectsPrimitives.FindAll( - delegate(Primitive prim) { - Vector3 pos = prim.Position; - return ((prim.ParentID == 0) && (pos != Vector3.Zero) && (Vector3.Distance(pos, location) < radius)); - } - ); - - - - - Find All items in an - return matching keys. - a containing found keys. - - Find All keys which also exist in another dictionary - - List<UUID> matches = myDict.FindAll( - delegate(UUID id) { - return myOtherDict.ContainsKey(id); - } - ); - - - - - Check if Key exists in Dictionary - Key to check for - if found, otherwise - - - Check if Value exists in Dictionary - Value to check for - if found, otherwise - - - - Adds the specified key to the dictionary, dictionary locking is not performed, - - - The key - The value - - - - Removes the specified key, dictionary locking is not performed - - The key. - if successful, otherwise - - - - Clear the contents of the dictionary - - - - - Enumerator for iterating dictionary entries - - - - - - Gets the number of Key/Value pairs contained in the - - - - - Indexer for the dictionary - - The key - The value - - - Describes tasks returned in LandStatReply - - - - Estate level administration and utilities - - - - Textures for each of the four terrain height levels - - - Upper/lower texture boundaries for each corner of the sim - - - - Constructor for EstateTools class - - - - - - Requests estate information such as top scripts and colliders - - - - - - - - Requests estate settings, including estate manager and access/ban lists - - - Requests the "Top Scripts" list for the current region - - - Requests the "Top Colliders" list for the current region - - - - Set several estate specific configuration variables - - The Height of the waterlevel over the entire estate. Defaults to 20 - The maximum height change allowed above the baked terrain. Defaults to 4 - The minimum height change allowed below the baked terrain. Defaults to -4 - true to use - if True forces the sun position to the position in SunPosition - The current position of the sun on the estate, or when FixedSun is true the static position - the sun will remain. 6.0 = Sunrise, 30.0 = Sunset - - - - Request return of objects owned by specified avatar - - The Agents owning the primitives to return - specify the coverage and type of objects to be included in the return - true to perform return on entire estate - - - - - - - - - Used for setting and retrieving various estate panel settings - - EstateOwnerMessage Method field - List of parameters to include - - - - Kick an avatar from an estate - - Key of Agent to remove - - - - Ban an avatar from an estate - Key of Agent to remove - Ban user from this estate and all others owned by the estate owner - - - Unban an avatar from an estate - Key of Agent to remove - /// Unban user from this estate and all others owned by the estate owner - - - - Send a message dialog to everyone in an entire estate - - Message to send all users in the estate - - - - Send a message dialog to everyone in a simulator - - Message to send all users in the simulator - - - - Send an avatar back to their home location - - Key of avatar to send home - - - - Begin the region restart process - - - - - Cancels a region restart - - - - Estate panel "Region" tab settings - - - Estate panel "Debug" tab settings - - - Used for setting the region's terrain textures for its four height levels - - - - - - - Used for setting sim terrain texture heights - - - Requests the estate covenant - - - - Upload a terrain RAW file - - A byte array containing the encoded terrain data - The name of the file being uploaded - The Id of the transfer request - - - - Teleports all users home in current Estate - - - - - Remove estate manager - Key of Agent to Remove - removes manager to this estate and all others owned by the estate owner - - - - Add estate manager - Key of Agent to Add - Add agent as manager to this estate and all others owned by the estate owner - - - - Add's an agent to the estate Allowed list - Key of Agent to Add - Add agent as an allowed reisdent to All estates if true - - - - Removes an agent from the estate Allowed list - Key of Agent to Remove - Removes agent as an allowed reisdent from All estates if true - - - - - Add's a group to the estate Allowed list - Key of Group to Add - Add Group as an allowed group to All estates if true - - - - - Removes a group from the estate Allowed list - Key of Group to Remove - Removes Group as an allowed Group from All estates if true - - - - - - - - - - - - - - - - - - Triggered upon a successful .GetTopColliders() - - - Triggered upon a successful .GetTopScripts() - - - Returned, along with other info, upon a successful .GetInfo() - - - Returned, along with other info, upon a successful .GetInfo() - - - Returned, along with other info, upon a successful .GetInfo() - - - Returned, along with other info, upon a successful .GetInfo() - - - Returned, along with other info, upon a successful .GetInfo() - - - Triggered upon a successful .RequestCovenant() - - - - Triggered on LandStatReply when the report type is for "top colliders" - - - - - - - Triggered on LandStatReply when the report type is for "top scripts" - - - - - - - Triggered when the list of estate managers is received for the current estate - - - - - - - - FIXME - Enumerate all params from EstateOwnerMessage packet - - - - - - - - Used in the ReportType field of a LandStatRequest - - - Used by EstateOwnerMessage packets - - - Used by EstateOwnerMessage packets - - - - - - - - No flags set - - - Only return targets scripted objects - - - Only return targets objects if on others land - - - Returns target's scripted objects and objects on other parcels - - - Ground texture settings for each corner of the region - - - Used by GroundTextureHeightSettings - - - The high and low texture thresholds for each corner of the sim - - - - Archives assets - - - - - Archive assets - - - - - Archive the assets given to this archiver to the given archive. - - - - - - Write an assets metadata file to the given archive - - - - - - Write asset data files to the given archive - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Attempts to convert an LLSD structure to a known Packet type - - Event name, this must match an actual - packet name for a Packet to be successfully built - LLSD to convert to a Packet - A Packet on success, otherwise null - - - - A set of textures that are layered on texture of each other and "baked" - in to a single texture, for avatar appearances - - - - Reference to the GridClient object - - - Finald baked texture - - - Appearance parameters the drive the baking process - - - Wearable textures - - - Total number of textures in the bake - - - Width of the final baked image and scratchpad - - - Height of the final baked image and scratchpad - - - Bake type - - - - Default constructor - - Reference to the GridClient object - - Total number of layers this layer set is - composed of - Appearance parameters the drive the - baking process - - - - Adds an image to this baking texture and potentially processes it, or - stores it for processing later - - The baking texture index of the image to be added - JPEG2000 compressed image to be - added to the baking texture - True if Decode() needs to be - called for the texture, otherwise false - True if this texture is completely baked and JPEG2000 data - is available, otherwise false - - - - Fills a baked layer as a solid *appearing* color. The colors are - subtly dithered on a 16x16 grid to prevent the JPEG2000 stage from - compressing it too far since it seems to cause upload failures if - the image is a pure solid color - - Red value - Green value - Blue value - - - - Represents an that represents an avatars body ie: Hair, Etc. - - - - - Represents a Wearable Asset, Clothing, Hair, Skin, Etc - - - - A string containing the name of the asset - - - A string containing a short description of the asset - - - The Assets WearableType - - - The For-Sale status of the object - - - An Integer representing the purchase price of the asset - - - The of the assets creator - - - The of the assets current owner - - - The of the assets prior owner - - - The of the Group this asset is set to - - - True if the asset is owned by a - - - The Permissions mask of the asset - - - A Dictionary containing Key/Value pairs of the objects parameters - - - A Dictionary containing Key/Value pairs where the Key is the textures Index and the Value is the Textures - - - Initializes a new instance of an AssetWearable object - - - Initializes a new instance of an AssetWearable object with parameters - A unique specific to this asset - A byte array containing the raw asset data - - - Initializes a new instance of an AssetWearable object with parameters - A string containing the asset parameters - - - - Decode an assets byte encoded data to a string - - true if the asset data was decoded successfully - - - - Encode the assets string represantion into a format consumable by the asset server - - - - Initializes a new instance of an AssetBodyPart object - - - Initializes a new instance of an AssetBodyPart object with parameters - A unique specific to this asset - A byte array containing the raw asset data - - - Initializes a new instance of an AssetBodyPart object with parameters - A string representing the values of the Bodypart - - - Override the base classes AssetType - - - - Represents an Animation - - - - Default Constructor - - - - Construct an Asset object of type Animation - - A unique specific to this asset - A byte array containing the raw asset data - - - Override the base classes AssetType - - - - Holds group information for Avatars such as those you might find in a profile - - - - true of Avatar accepts group notices - - - Groups Key - - - Texture Key for groups insignia - - - Name of the group - - - Powers avatar has in the group - - - Avatars Currently selected title - - - true of Avatar has chosen to list this in their profile - - - - Holds group information on an individual profile pick - - - - - Retrieve friend status notifications, and retrieve avatar names and - profiles - - - - - Represents other avatars - - - - - Tracks the specified avatar on your map - Avatar ID to track - - - - Request a single avatar name - - The avatar key to retrieve a name for - - - - Request a list of avatar names - - The avatar keys to retrieve names for - - - - Start a request for Avatar Properties - - - - - - Search for an avatar (first name, last name, and uuid) - - The name to search for - An ID to associate with this query - - - - Start a request for Avatar Picks - - UUID of the avatar - - - - Start a request for Avatar Classifieds - - UUID of the avatar - - - - Start a request for details of a specific profile pick - - UUID of the avatar - UUID of the profile pick - - - - Start a request for details of a specific profile classified - - UUID of the avatar - UUID of the profile classified - - - - Process an incoming UUIDNameReply Packet and insert Full Names into the Avatars Dictionary - - Incoming Packet to process - Unused - - - - Process incoming avatar animations - - - - - - - Process incoming avatar appearance - - - - - - - Process incoming avatar properties (profile data) - - - - - - - Process incoming Avatar Interests information - - - - - Process an incoming effect - - - - - Process an incoming list of profile picks - - - - - Process an incoming details of a profile pick - - - - - Process an incoming list of profile classifieds - - - - - Process an incoming details of a profile Classified - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Triggered when an avatar animation signal is received - - UUID of the avatar sending the animation - UUID of the animation, and animation sequence number - - - - Triggered when AvatarAppearance is received - - - - - - - - - - Triggered when a UUIDNameReply is received - - - - - - Triggered when a response for avatar interests is returned - - - - - - - Triggered when avatar properties are received (AvatarPropertiesReply) - - - - - - - Triggered when an avatar group list is received (AvatarGroupsReply) - - - - - - - Triggered when a name search reply is received (AvatarPickerReply) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Callback returning a dictionary of avatar's picks - - - - - - - Callback returning a details of a specifick pick - - - - - - - Callback returning a dictionary of avatar's Classified - - - - - - - Callback returning a details of a specifick Classified - - - - - - - Manager class to for agents appearance, both body parts and clothing - - - - Total number of wearables for each avatar - - - Total number of baked textures on each avatar - - - Total number of wearables per bake layer - - - Total number of textures on an avatar, baked or not - - - Map of what wearables are included in each bake - - - Secret values to finalize the cache check hashes for each - bake - - - Default avatar texture, used to detect when a custom - texture is not set for a face - - - - An which keeps track of wearables data - - - - - Default constructor - - This agents Object - Reference to an AssetManager object - - - - Returns the assetID for a given WearableType - - the of the asset - The of the WearableType - - - - Ask the server what we are wearing and set appearance based on that - - - - - Replace the current outfit with a list of wearables and set appearance - - List of wearables that define the new outfit - - - - Replace the current outfit with a list of wearables and set appearance - - List of wearables that define the new outfit - Whether to bake textures for the avatar or not - - - - Add to the current outfit with the list supplied - - List of wearables that will be added to the outfit - Whether to bake textures for the avatar or not - - - - Replace the current outfit with a folder and set appearance - - UUID of the inventory folder to wear - - - - Replace the current outfit with a folder and set appearance - - Inventory path of the folder to wear - - - - Replace the current outfit with a folder and set appearance - - Folder containing the new outfit - Whether to bake the avatar textures or not - - - - Replace the current outfit with a folder and set appearance - - Path of folder containing the new outfit - Whether to bake the avatar textures or not - - - - Adds a list of attachments to avatar - - A List containing the attachments to add - If true, tells simulator to remove existing attachment - first - - - - Attach an item to an avatar at a specific attach point - - A to attach - the on the avatar - to attach the item to - - - - Attach an item to an avatar specifying attachment details - - The of the item to attach - The attachments owner - The name of the attachment - The description of the attahment - The to apply when attached - The of the attachment - the on the avatar - to attach the item to - - - - Detach an item from avatar using an object - - An object - - - - Detach an Item from avatar by items - - The items ID to detach - - - - Build hashes out of the texture assetIDs for each baking layer to - ask the simulator whether it has cached copies of each baked texture - - - - - Force a rebake of the currently worn textures - - - - - Ask the server what textures our avatar is currently wearing - - - - - Terminate any wait handles when the network layer disconnects - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Capability to load TGAs to Bitmap - - - - - Thrown when a packet could not be successfully deserialized - - - - - Default constructor - - - - - Constructor that takes an additional error message - - An error message to attach to this exception - - - - The header of a message template packet. Holds packet flags, sequence - number, packet ID, and any ACKs that will be appended at the end of - the packet - - - - - Convert the AckList to a byte array, used for packet serializing - - Reference to the target byte array - Beginning position to start writing to in the byte - array, will be updated with the ending position of the ACK list - - - - - - - - - - - - - - - - - - - - - A block of data in a packet. Packets are composed of one or more blocks, - each block containing one or more fields - - - - - Create a block from a byte array - - Byte array containing the serialized block - Starting position of the block in the byte array. - This will point to the data after the end of the block when the - call returns - - - - Serialize this block into a byte array - - Byte array to serialize this block into - Starting position in the byte array to serialize to. - This will point to the position directly after the end of the - serialized block when the call returns - - - Current length of the data in this packet - - - A generic value, not an actual packet type - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - The avatar has no rights - - - The avatar can see the online status of the target avatar - - - The avatar can see the location of the target avatar on the map - - - The avatar can modify the ojects of the target avatar - - - - This class holds information about an avatar in the friends list. There are two ways - to interface to this class. The first is through the set of boolean properties. This is the typical - way clients of this class will use it. The second interface is through two bitflag properties, - TheirFriendsRights and MyFriendsRights - - - - - Used internally when building the initial list of friends at login time - - System ID of the avatar being prepesented - Rights the friend has to see you online and to modify your objects - Rights you have to see your friend online and to modify their objects - - - - FriendInfo represented as a string - - A string reprentation of both my rights and my friends rights - - - - System ID of the avatar - - - - - full name of the avatar - - - - - True if the avatar is online - - - - - True if the friend can see if I am online - - - - - True if the friend can see me on the map - - - - - True if the freind can modify my objects - - - - - True if I can see if my friend is online - - - - - True if I can see if my friend is on the map - - - - - True if I can modify my friend's objects - - - - - My friend's rights represented as bitmapped flags - - - - - My rights represented as bitmapped flags - - - - - This class is used to add and remove avatars from your friends list and to manage their permission. - - - - - A dictionary of key/value pairs containing known friends of this avatar. - - The Key is the of the friend, the value is a - object that contains detailed information including permissions you have and have given to the friend - - - - - A Dictionary of key/value pairs containing current pending frienship offers. - - The key is the of the avatar making the request, - the value is the of the request which is used to accept - or decline the friendship offer - - - - - Internal constructor - - A reference to the GridClient Object - - - - Accept a friendship request - - agentID of avatatar to form friendship with - imSessionID of the friendship request message - - - - Decline a friendship request - - of friend - imSessionID of the friendship request message - - - - Overload: Offer friendship to an avatar. - - System ID of the avatar you are offering friendship to - - - - Offer friendship to an avatar. - - System ID of the avatar you are offering friendship to - A message to send with the request - - - - Terminate a friendship with an avatar - - System ID of the avatar you are terminating the friendship with - - - - Fired when another friend terminates friendship. We need to remove them from - our cached list. - - - - - - - Change the rights of a friend avatar. - - the of the friend - the new rights to give the friend - This method will implicitly set the rights to those passed in the rights parameter. - - - - Use to map a friends location on the grid. - - Friends UUID to find - - - - - Use to track a friends movement on the grid - - Friends Key - - - - Called when a connection to the SL server is established. The list of friend avatars - is populated from XML returned by the login server. That list contains the avatar's id - and right, but no names. Here is where those names are requested. - - - - - - This handles the asynchronous response of a RequestAvatarNames call. - - names cooresponding to the the list of IDs sent the the RequestAvatarNames call. - - - - Handle notifications sent when a friends has come online. - - - - - - - Handle notifications sent when a friends has gone offline. - - - - - - - Handle notifications sent when a friend rights change. This notification is also received - when my own rights change. - - - - - - - Handle friend location updates - - The Packet - The Simulator - - - - Handles relevant messages from the server encapsulated in instant messages. - - InstantMessage object containing encapsalated instant message - Originating Simulator - - - - Populate FriendList with data from the login reply - - true if login was successful - true if login request is requiring a redirect - A string containing the response to the login request - A string containing the reason for the request - A object containing the decoded - reply from the login server - - - - Triggered when an avatar in your friends list comes online - - System ID of the avatar - - - - Triggered when an avatar in your friends list goes offline - - System ID of the avatar - - - - Triggered in response to a call to the FriendRights() method, or when a friend changes your rights - - System ID of the avatar you changed the right of - - - - Triggered when names on the friend list are received after the initial request upon login - - - - - - Triggered when someone offers you friendship - - System ID of the agent offering friendship - full name of the agent offereing friendship - session ID need when accepting/declining the offer - Return true to accept the friendship, false to deny it - - - - Trigger when your friendship offer has been accepted or declined - - System ID of the avatar who accepted your friendship offer - Full name of the avatar who accepted your friendship offer - Whether the friendship request was accepted or declined - - - - Trigger when someone terminates your friendship. - - System ID of the avatar who terminated your friendship - Full name of the avatar who terminated your friendship - - - - Triggered in response to a FindFriend request - - Friends Key - region handle friend is in - X/Y location of friend - - - - - - Looking direction, must be a normalized vector - Up direction, must be a normalized vector - - - - Align the coordinate frame X and Y axis with a given rotation - around the Z axis in radians - - Absolute rotation around the Z axis in - radians - - - Origin position of this coordinate frame - - - X axis of this coordinate frame, or Forward/At in grid terms - - - Y axis of this coordinate frame, or Left in grid terms - - - Z axis of this coordinate frame, or Up in grid terms - - - - Manager class for our own avatar - - - - Reference to the GridClient instance - - - Used for movement and camera tracking - - - Currently playing animations for the agent. Can be used to - check the current movement status such as walking, hovering, aiming, - etc. by checking for system animations in the Animations class - - - Dictionary containing current Group Chat sessions and members - - - - Constructor, setup callbacks for packets related to our avatar - - A reference to the Class - - - - Send a text message from the Agent to the Simulator - - A containing the message - The channel to send the message on, 0 is the public channel. Channels above 0 - can be used however only scripts listening on the specified channel will see the message - Denotes the type of message being sent, shout, whisper, etc. - - - - Request any instant messages sent while the client was offline to be resent. - - - - - Send an Instant Message to another Avatar - - The recipients - A containing the message to send - - - - Send an Instant Message to an existing group chat or conference chat - - The recipients - A containing the message to send - IM session ID (to differentiate between IM windows) - - - - Send an Instant Message - - The name this IM will show up as being from - Key of Avatar - Text message being sent - IM session ID (to differentiate between IM windows) - IDs of sessions for a conference - - - - Send an Instant Message - - The name this IM will show up as being from - Key of Avatar - Text message being sent - IM session ID (to differentiate between IM windows) - Type of instant message to send - Whether to IM offline avatars as well - Senders Position - RegionID Sender is In - Packed binary data that is specific to - the dialog type - - - - Send an Instant Message to a group - - of the group to send message to - Text Message being sent. - - - - Send an Instant Message to a group the agent is a member of - - The name this IM will show up as being from - of the group to send message to - Text message being sent - - - - Send a request to join a group chat session - - of Group to leave - - - - Exit a group chat session. This will stop further Group chat messages - from being sent until session is rejoined. - - of Group chat session to leave - - - - Reply to script dialog questions. - - Channel initial request came on - Index of button you're "clicking" - Label of button you're "clicking" - of Object that sent the dialog request - - - - - Accept invite for to a chatterbox session - - of session to accept invite to - - - - Start a friends conference - - List of UUIDs to start a conference with - the temportary session ID returned in the callback> - - - - Start a particle stream between an agent and an object - - Key of the source agent - Key of the target object - - The type from the enum - A unique for this effect - - - - Start a particle stream between an agent and an object - - Key of the source agent - Key of the target object - A representing the beams offset from the source - A which sets the avatars lookat animation - of the Effect - - - - Create a particle beam between an avatar and an primitive - - of sources avatar - of the target - global offset - Color values of beam - a float representing the duration the beam will last - of the Effect - - - - Create a particle swirl around a target position - - Target's global position - Color values of beam - A float representing the duration the swirl will last - of the Effect - - - - Sends a request to sit on the specified object - - of the object to sit on - Sit at offset - - - - Follows a call to to actually sit on the object - - - - Stands up from sitting on a prim or the ground - true of AgentUpdate was sent - - - - Does a "ground sit" at the avatar's current position - - - - - Starts or stops flying - - True to start flying, false to stop flying - - - - Starts or stops crouching - - True to start crouching, false to stop crouching - - - - Starts a jump (begin holding the jump key) - - - - - Use the autopilot sim function to move the avatar to a new - position. Uses double precision to get precise movements - - The z value is currently not handled properly by the simulator - Global X coordinate to move to - Global Y coordinate to move to - Z coordinate to move to - - - - Use the autopilot sim function to move the avatar to a new position - - The z value is currently not handled properly by the simulator - Integer value for the global X coordinate to move to - Integer value for the global Y coordinate to move to - Floating-point value for the Z coordinate to move to - - - - Use the autopilot sim function to move the avatar to a new position - - The z value is currently not handled properly by the simulator - Integer value for the local X coordinate to move to - Integer value for the local Y coordinate to move to - Floating-point value for the Z coordinate to move to - - - Macro to cancel autopilot sim function - Not certain if this is how it is really done - true if control flags were set and AgentUpdate was sent to the simulator - - - - Grabs an object - - an unsigned integer of the objects ID within the simulator - - - - - Overload: Grab a simulated object - - an unsigned integer of the objects ID within the simulator - - - - - - - - - - - Drag an object - - of the object to drag - Drag target in region coordinates - - - - Overload: Drag an object - - of the object to drag - Drag target in region coordinates - - - - - - - - - - - Release a grabbed object - - The Objects Simulator Local ID - - - - - - - Release a grabbed object - - The Objects Simulator Local ID - - - - - - - - - - Touches an object - - an unsigned integer of the objects ID within the simulator - - - - - Request the current L$ balance - - - - - Give Money to destination Avatar - - UUID of the Target Avatar - Amount in L$ - - - - Give Money to destination Avatar - - UUID of the Target Avatar - Amount in L$ - Description that will show up in the - recipients transaction history - - - - Give L$ to an object - - object to give money to - amount of L$ to give - name of object - - - - Give L$ to a group - - group to give money to - amount of L$ to give - - - - Give L$ to a group - - group to give money to - amount of L$ to give - description of transaction - - - - Pay texture/animation upload fee - - - - - Pay texture/animation upload fee - - description of the transaction - - - - Give Money to destionation Object or Avatar - - UUID of the Target Object/Avatar - Amount in L$ - Reason (Optional normally) - The type of transaction - Transaction flags, mostly for identifying group - transactions - - - - Plays a gesture - - Asset of the gesture - - - - Mark gesture active - - Inventory of the gesture - Asset of the gesture - - - - Mark gesture inactive - - Inventory of the gesture - - - - Send an AgentAnimation packet that toggles a single animation on - - The of the animation to start playing - Whether to ensure delivery of this packet or not - - - - Send an AgentAnimation packet that toggles a single animation off - - The of a - currently playing animation to stop playing - Whether to ensure delivery of this packet or not - - - - Send an AgentAnimation packet that will toggle animations on or off - - A list of animation s, and whether to - turn that animation on or off - Whether to ensure delivery of this packet or not - - - - Teleports agent to their stored home location - - true on successful teleport to home location - - - - Teleport agent to a landmark - - of the landmark to teleport agent to - true on success, false on failure - - - - Attempt to look up a simulator name and teleport to the discovered - destination - - Region name to look up - Position to teleport to - True if the lookup and teleport were successful, otherwise - false - - - - Attempt to look up a simulator name and teleport to the discovered - destination - - Region name to look up - Position to teleport to - Target to look at - True if the lookup and teleport were successful, otherwise - false - - - - Teleport agent to another region - - handle of region to teleport agent to - position in destination sim to teleport to - true on success, false on failure - This call is blocking - - - - Teleport agent to another region - - handle of region to teleport agent to - position in destination sim to teleport to - direction in destination sim agent will look at - true on success, false on failure - This call is blocking - - - - Request teleport to a another simulator - - handle of region to teleport agent to - position in destination sim to teleport to - - - - Request teleport to a another simulator - - handle of region to teleport agent to - position in destination sim to teleport to - direction in destination sim agent will look at - - - - Teleport agent to a landmark - - of the landmark to teleport agent to - - - - Send a teleport lure to another avatar with default "Join me in ..." invitation message - - target avatars to lure - - - - Send a teleport lure to another avatar with custom invitation message - - target avatars to lure - custom message to send with invitation - - - - Respond to a teleport lure by either accepting it and initiating - the teleport, or denying it - - of the avatar sending the lure - true to accept the lure, false to decline it - - - - Update agent profile - - struct containing updated - profile information - - - - Update agents profile interests - - selection of interests from struct - - - - Set the height and the width of the client window. This is used - by the server to build a virtual camera frustum for our avatar - - New height of the viewer window - New width of the viewer window - - - - Request the list of muted objects and avatars for this agent - - - - - Sets home location to agents current position - - will fire an AlertMessage () with - success or failure message - - - - Move an agent in to a simulator. This packet is the last packet - needed to complete the transition in to a new simulator - - Object - - - - Reply to script permissions request - - Object - of the itemID requesting permissions - of the taskID requesting permissions - list of permissions to allow - - - - Respond to a group invitation by either accepting or denying it - - UUID of the group (sent in the AgentID field of the invite message) - IM Session ID from the group invitation message - Accept the group invitation or deny it - - - - Requests script detection of objects and avatars - - name of the object/avatar to search for - UUID of the object or avatar to search for - Type of search from ScriptSensorTypeFlags - range of scan (96 max?) - the arc in radians to search within - an user generated ID to correlate replies with - Simulator to perform search in - - - - Create or update profile pick - - UUID of the pick to update, or random UUID to create a new pick - Is this a top pick? (typically false) - UUID of the parcel (UUID.Zero for the current parcel) - Name of the pick - Global position of the pick landmark - UUID of the image displayed with the pick - Long description of the pick - - - - Delete profile pick - - UUID of the pick to delete - - - - Create or update profile Classified - - UUID of the classified to update, or random UUID to create a new classified - Defines what catagory the classified is in - UUID of the image displayed with the classified - Price that the classified will cost to place for a week - Global position of the classified landmark - Name of the classified - Long description of the classified - if true, auto renew classified after expiration - - - - Delete a classified ad - - The classified ads ID - - - - Take an incoming ImprovedInstantMessage packet, auto-parse, and if - OnInstantMessage is defined call that with the appropriate arguments - - Incoming ImprovedInstantMessagePacket - Unused - - - - Take an incoming Chat packet, auto-parse, and if OnChat is defined call - that with the appropriate arguments. - - Incoming ChatFromSimulatorPacket - Unused - - - - Used for parsing llDialogs - - Incoming ScriptDialog packet - Unused - - - - Used for parsing llRequestPermissions dialogs - - Incoming ScriptDialog packet - Unused - - - - Handles Script Control changes when Script with permissions releases or takes a control - - - - - - - Used for parsing llLoadURL Dialogs - - - - - - - Update client's Position, LookAt and region handle from incoming packet - - Incoming AgentMovementCompletePacket - Unused - This occurs when after an avatar moves into a new sim - - - - Update Client Avatar's health via incoming packet - - Incoming HealthMessagePacket - Unused - - - - Update Client Avatar's L$ balance from incoming packet - - Incoming MoneyBalanceReplyPacket - Unused - - - - Process TeleportFailed message sent via EventQueue, informs agent its last teleport has failed and why. - - The Message Key - An IMessage object Deserialized from the recieved message event - The simulator originating the event message - - - - Process TeleportFinish from Event Queue and pass it onto our TeleportHandler - - The message system key for this event - IMessage object containing decoded data from OSD - The simulator originating the event message - - - - Handler for teleport Requests - - Incoming TeleportHandler packet - Simulator sending teleport information - - - - - - - - - - - Crossed region handler for message that comes across the EventQueue. Sent to an agent - when the agent crosses a sim border into a new region. - - The message key - the IMessage object containing the deserialized data sent from the simulator - The which originated the packet - - - - Allows agent to cross over (walk, fly, vehicle) in to neighboring - simulators - - This packet is now being sent via the EventQueue - - - - Group Chat event handler - - The capability Key - IMessage object containing decoded data from OSD - - - - - Response from request to join a group chat - - - IMessage object containing decoded data from OSD - - - - - Someone joined or left group chat - - - IMessage object containing decoded data from OSD - - - - - Handle a group chat Invitation - - Caps Key - IMessage object containing decoded data from OSD - Originating Simulator - - - - Moderate a chat session - - the of the session to moderate, for group chats this will be the groups UUID - the of the avatar to moderate - Either "voice" to moderate users voice, or "text" to moderate users text session - true to moderate (silence user), false to allow avatar to speak - - - - Alert Message packet handler - - AlertMessagePacket - not used - - - - detects camera constraint collisions - - - - - - - Packet handler for ScriptSensorReply packet - - - - - - - Packet handler for AvatarSitResponse packet - - - - - - Fired when a is received from the simulator, Contains - Any Whisper, Shout, or Say within range of avatar - - - Fired when a is received, use - to respond to dialog - - - Fired when a is received in response to a - scripted object requesting permissions, Use to reply - - - Fired when a is received, contains a URL pasted in Chat - - - Fired when a or a ChatterBoxInvitation is received - - - Fired when a is received, occurs when a - or is called - - - Fired when a indicating the agents - balance has changed by spending, sending, or receiving L$, Contains the Avatars new balance - - - Fired when a is received, contains L$ balance and additional - details of the transaction - - - Fired when a is received, caused by changing the - Agents active group with - - - Fired when a is received, will contain a Dictionary - of animations currently being played - - - Callback for an object or avatar forcefully colliding - with the agent - - - Callback for the agent moving in to a neighboring sim - - - Callback for when agent is confirmed joined group chat session. - - - Callback for when agent is confirmed to have left group chat session. - - - Alert messages sent to client from simulator - - - Fired when a script wants to take or release control of your avatar. - - - Fired when our avatar camera reaches the maximum possible point - - - Fired when a script sensor reply is received - - - Fired in response to a sit request - - - Fired when a new member joins an active ChatterBoxSession session - - - Fired when a member of an active ChatterBoxSession leaves the session - - - Your (client) avatars - "client", "agent", and "avatar" all represent the same thing - - - Temporary assigned to this session, used for - verifying our identity in packets - - - Shared secret that is never sent over the wire - - - Your (client) avatar ID, local to the current region/sim - - - Where the avatar started at login. Can be "last", "home" - or a login - - - The access level of this agent, usually M or PG - - - The CollisionPlane of Agent - - - An representing the velocity of our agent - - - An representing the acceleration of our agent - - - A which specifies the angular speed, and axis about which an Avatar is rotating. - - - Position avatar client will goto when login to 'home' or during - teleport request to 'home' region. - - - LookAt point saved/restored with HomePosition - - - Avatar First Name (i.e. Philip) - - - Avatar Last Name (i.e. Linden) - - - Avatar Full Name (i.e. Philip Linden) - - - Gets the health of the agent - - - Gets the current balance of the agent - - - Gets the local ID of the prim the agent is sitting on, - zero if the avatar is not currently sitting - - - Gets the of the agents active group. - - - Gets the Agents powers in the currently active group - - - Current status message for teleporting - - - Current position of the agent as a relative offset from - the simulator, or the parent object if we are sitting on something - - - Current rotation of the agent as a relative rotation from - the simulator, or the parent object if we are sitting on something - - - Current position of the agent in the simulator - - - - A representing the agents current rotation - - - - Returns the global grid position of the avatar - - - - Agent movement and camera control - - Agent movement is controlled by setting specific - After the control flags are set, An AgentUpdate is required to update the simulator of the specified flags - This is most easily accomplished by setting one or more of the AgentMovement properties - - Movement of an avatar is always based on a compass direction, for example AtPos will move the - agent from West to East or forward on the X Axis, AtNeg will of course move agent from - East to West or backward on the X Axis, LeftPos will be South to North or forward on the Y Axis - The Z axis is Up, finer grained control of movements can be done using the Nudge properties - - - - Agent camera controls - - - Currently only used for hiding your group title - - - Action state of the avatar, which can currently be - typing and editing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Timer for sending AgentUpdate packets - - - Default constructor - - - - Send an AgentUpdate with the camera set at the current agent - position and pointing towards the heading specified - - Camera rotation in radians - Whether to send the AgentUpdate reliable - or not - - - - Rotates the avatar body and camera toward a target position. - This will also anchor the camera position on the avatar - - Region coordinates to turn toward - - - - Send new AgentUpdate packet to update our current camera - position and rotation - - - - - Send new AgentUpdate packet to update our current camera - position and rotation - - Whether to require server acknowledgement - of this packet - - - - Send new AgentUpdate packet to update our current camera - position and rotation - - Whether to require server acknowledgement - of this packet - Simulator to send the update to - - - - Builds an AgentUpdate packet entirely from parameters. This - will not touch the state of Self.Movement or - Self.Movement.Camera in any way - - - - - - - - - - - - - - - Move agent positive along the X axis - - - Move agent negative along the X axis - - - Move agent positive along the Y axis - - - Move agent negative along the Y axis - - - Move agent positive along the Z axis - - - Move agent negative along the Z axis - - - - - - - - - - - - - - - - - - - - - - - - Causes simulator to make agent fly - - - Stop movement - - - Finish animation - - - Stand up from a sit - - - Tells simulator to sit agent on ground - - - Place agent into mouselook mode - - - Nudge agent positive along the X axis - - - Nudge agent negative along the X axis - - - Nudge agent positive along the Y axis - - - Nudge agent negative along the Y axis - - - Nudge agent positive along the Z axis - - - Nudge agent negative along the Z axis - - - - - - - - - Tell simulator to mark agent as away - - - - - - - - - - - - - - - - Returns "always run" value, or changes it by sending a SetAlwaysRunPacket - - - - The current value of the agent control flags - - - Gets or sets the interval in milliseconds at which - AgentUpdate packets are sent to the current simulator. Setting - this to a non-zero value will also enable the packet sending if - it was previously off, and setting it to zero will disable - - - Gets or sets whether AgentUpdate packets are sent to - the current simulator - - - Reset movement controls every time we send an update - - - - Camera controls for the agent, mostly a thin wrapper around - CoordinateFrame. This class is only responsible for state - tracking and math, it does not send any packets - - - - - - - The camera is a local frame of reference inside of - the larger grid space. This is where the math happens - - - - Default constructor - - - - - - - - - - - - - - - - - Used to specify movement actions for your agent - - - - Empty flag - - - Move Forward (SL Keybinding: W/Up Arrow) - - - Move Backward (SL Keybinding: S/Down Arrow) - - - Move Left (SL Keybinding: Shift-(A/Left Arrow)) - - - Move Right (SL Keybinding: Shift-(D/Right Arrow)) - - - Not Flying: Jump/Flying: Move Up (SL Keybinding: E) - - - Not Flying: Croutch/Flying: Move Down (SL Keybinding: C) - - - Unused - - - Unused - - - Unused - - - Unused - - - ORed with AGENT_CONTROL_AT_* if the keyboard is being used - - - ORed with AGENT_CONTROL_LEFT_* if the keyboard is being used - - - ORed with AGENT_CONTROL_UP_* if the keyboard is being used - - - Fly - - - - - - Finish our current animation - - - Stand up from the ground or a prim seat - - - Sit on the ground at our current location - - - Whether mouselook is currently enabled - - - Legacy, used if a key was pressed for less than a certain amount of time - - - Legacy, used if a key was pressed for less than a certain amount of time - - - Legacy, used if a key was pressed for less than a certain amount of time - - - Legacy, used if a key was pressed for less than a certain amount of time - - - Legacy, used if a key was pressed for less than a certain amount of time - - - Legacy, used if a key was pressed for less than a certain amount of time - - - - - - - - - Set when the avatar is idled or set to away. Note that the away animation is - activated separately from setting this flag - - - - - - - - - - - - - - - - Triggered on incoming chat messages - - Text of chat message - Audible level of this chat message - Type of chat (whisper, shout, status, etc.) - Source of the chat message - Name of the sending object - Key of source - Key of the sender - Senders position - - - - Triggered when a script pops up a dialog box - - The dialog box message - Name of the object that sent the dialog - Image to be displayed in the dialog - ID of the object that sent the dialog - First name of the object owner - Last name of the object owner - Chat channel that the object is communicating on - List of button labels - - - - Triggered when a script asks for permissions - - Simulator object this request comes from - Task ID of the script requesting permissions - ID of the object containing the script - Name of the object containing the script - Name of the object's owner - Bitwise value representing the requested permissions - - - - Triggered when a script displays a URL via llLoadURL - - Name of the scripted object - ID of the scripted object - ID of the object's owner - Whether or not ownerID is a group - Message displayed along with URL - Offered URL - - - - Triggered when the L$ account balance for this avatar changes - - The new account balance - - - - Triggered on Money Balance Reply - - ID provided in Request Money Balance, or auto-generated by system events - Was the transaction successful - Current balance - Land use credits you have - Tier committed to group(s) - Description of the transaction - - - - Triggered on incoming instant messages - - Instant message data structure - Simulator where this IM was received from - - - - Triggered for any status updates of a teleport (progress, failed, succeeded) - - A message about the current teleport status - The current status of the teleport - Various flags describing the teleport - - - - Reply to a request to join a group, informs whether it was successful or not - - The group we attempted to join - Whether we joined the group or not - - - - Reply to a request to leave a group, informs whether it was successful or not - - The group we attempted to leave - Whether we left the group or not - - - - Informs the avatar that it is no longer a member of a group - - The group Key we are no longer a member of - - - - Reply to an AgentData request - - First name of Avatar - Last name of Avatar - Key of Group Avatar has active - Avatars Active Title - Powers Avatar has in group - Name of the Group - - - - Triggered when the current agent animations change - - A convenience reference to the - SignaledAnimations collection - - - - Triggered when an object or avatar forcefully collides with our - agent - - Collision type - Colliding object or avatar ID - Victim ID, should be our own AgentID - Velocity or total force of the collision - Time the collision occurred - - - - Triggered when the agent physically moves in to a neighboring region - - Simulator agent was previously occupying - Simulator agent is now currently occupying - - - - Fired when group chat session confirmed joined - Key of Session (groups UUID) - Temporary session Key - A string representation of the session name - if session start successful, - otherwise - - - Fired when agent group chat session terminated - Key of Session (groups UUID) - - - - Fired when alert message received from simulator - - the message sent from the grid to our avatar. - - - - Fired when a script wants to give or release controls. - - Control to give or take - true of passing control to agent - true of taking control from agent - - - - Fired when camera tries to view beyond its view limits - - representing plane where constraints were hit - - - - Fired when script sensor reply is received - - requestors UUID - Sources Group UUID - Sources Name - Objects UUID - Object owners UUID - Position of Object - Range of Object - Rotation of object - Objects Type - representing the velocity of object - TODO: this should probably be a struct, and there should be an enum added for type - - - - Fired in response to a RequestSit() - - ID of primitive avatar will be sitting on - true of avatar autopiloted there - Camera offset when avatar is seated - Camera eye offset when avatar is seated - true of sitting on this object will force mouselook - position avatar will be in when seated - rotation avatar will be in when seated - - - - Fired when a new member joins a Group chat session - - the ID of the session - the ID of the avatar that joined - - - - Fired when a member of a Group chat leaves the session - - the ID of the session - the ID of the avatar that joined - - - - Represents a string of characters encoded with specific formatting properties - - - - A text string containing main text of the notecard - - - List of s embedded on the notecard - - - Construct an Asset of type Notecard - - - - Construct an Asset object of type Notecard - - A unique specific to this asset - A byte array containing the raw asset data - - - - Construct an Asset object of type Notecard - - A text string containing the main body text of the notecard - - - - Encode the raw contents of a string with the specific Linden Text properties - - - - - Decode the raw asset data including the Linden Text properties - - true if the AssetData was successfully decoded to a string - - - Override the base classes AssetType - - - X position of this patch - - - Y position of this patch - - - A 16x16 array of floats holding decompressed layer data - - - - Creates a LayerData packet for compressed land data given a full - simulator heightmap and an array of indices of patches to compress - - A 256 * 256 array of floating point values - specifying the height at each meter in the simulator - Array of indexes in the 16x16 grid of patches - for this simulator. For example if 1 and 17 are specified, patches - x=1,y=0 and x=1,y=1 are sent - - - - - Add a patch of terrain to a BitPacker - - BitPacker to write the patch to - Heightmap of the simulator, must be a 256 * - 256 float array - X offset of the patch to create, valid values are - from 0 to 15 - Y offset of the patch to create, valid values are - from 0 to 15 - - - - Add a custom decoder callback - - The key of the field to decode - The custom decode handler - - - - Remove a custom decoder callback - - The key of the field to decode - The custom decode handler - - - - Creates a formatted string containing the values of a Packet - - The Packet - A formatted string of values of the nested items in the Packet object - - - - A custom decoder callback - - The key of the object - the data to decode - A string represending the fieldData - - - - Throttles the network traffic for various different traffic types. - Access this class through GridClient.Throttle - - - - - Default constructor, uses a default high total of 1500 KBps (1536000) - - - - - Constructor that decodes an existing AgentThrottle packet in to - individual values - - Reference to the throttle data in an AgentThrottle - packet - Offset position to start reading at in the - throttle data - This is generally not needed in clients as the server will - never send a throttle packet to the client - - - - Send an AgentThrottle packet to the current server using the - current values - - - - - Send an AgentThrottle packet to the specified server using the - current values - - - - - Convert the current throttle values to a byte array that can be put - in an AgentThrottle packet - - Byte array containing all the throttle values - - - Maximum bits per second for resending unacknowledged packets - - - Maximum bits per second for LayerData terrain - - - Maximum bits per second for LayerData wind data - - - Maximum bits per second for LayerData clouds - - - Unknown, includes object data - - - Maximum bits per second for textures - - - Maximum bits per second for downloaded assets - - - Maximum bits per second the entire connection, divided up - between invidiual streams using default multipliers - - - - Default constructor - - - - - - Retrieve the terrain height at a given coordinate - - The region that the point of interest is in - Sim X coordinate, valid range is from 0 to 255 - Sim Y coordinate, valid range is from 0 to 255 - The terrain height at the given point if the - lookup was successful, otherwise 0.0f - True if the lookup was successful, otherwise false - - - - - - - - - - - - - - - - - Main class to expose grid functionality to clients. All of the - classes needed for sending and receiving data are accessible through - this class. - - - - // Example minimum code required to instantiate class and - // connect to a simulator. - using System; - using System.Collections.Generic; - using System.Text; - using OpenMetaverse; - - namespace FirstBot - { - class Bot - { - public static GridClient Client; - static void Main(string[] args) - { - Client = new GridClient(); // instantiates the GridClient class - // to the global Client object - // Login to Simulator - Client.Network.Login("FirstName", "LastName", "Password", "FirstBot", "1.0"); - // Wait for a Keypress - Console.ReadLine(); - // Logout of simulator - Client.Network.Logout(); - } - } - } - - - - - Networking subsystem - - - Settings class including constant values and changeable - parameters for everything - - - Parcel (subdivided simulator lots) subsystem - - - Our own avatars subsystem - - - Other avatars subsystem - - - Estate subsystem - - - Friends list subsystem - - - Grid (aka simulator group) subsystem - - - Object subsystem - - - Group subsystem - - - Asset subsystem - - - Appearance subsystem - - - Inventory subsystem - - - Directory searches including classifieds, people, land - sales, etc - - - Handles land, wind, and cloud heightmaps - - - Handles sound-related networking - - - Throttling total bandwidth usage, or allocating bandwidth - for specific data stream types - - - - Default constructor - - - - - Return the full name of this instance - - Client avatars full name - - - - Registers, unregisters, and fires events generated by incoming packets - - - - Reference to the GridClient object - - - - Default constructor - - - - - - Register an event handler - - Use PacketType.Default to fire this event on every - incoming packet - Packet type to register the handler for - Callback to be fired - - - - Unregister an event handler - - Packet type to unregister the handler for - Callback to be unregistered - - - - Fire the events registered for this packet type synchronously - - Incoming packet type - Incoming packet - Simulator this packet was received from - - - - Fire the events registered for this packet type asynchronously - - Incoming packet type - Incoming packet - Simulator this packet was received from - - - - Object that is passed to worker threads in the ThreadPool for - firing packet callbacks - - - - Callback to fire for this packet - - - Reference to the simulator that this packet came from - - - The packet that needs to be processed - - - - Registers, unregisters, and fires events generated by the Capabilities - event queue - - - - Reference to the GridClient object - - - - Default constructor - - Reference to the GridClient object - - - - Register an new event handler for a capabilities event sent via the EventQueue - - Use String.Empty to fire this event on every CAPS event - Capability event name to register the - handler for - Callback to fire - - - - Unregister a previously registered capabilities handler - - Capability event name unregister the - handler for - Callback to unregister - - - - Fire the events registered for this event type synchronously - - Capability name - Decoded event body - Reference to the simulator that - generated this event - - - - Fire the events registered for this event type asynchronously - - Capability name - Decoded event body - Reference to the simulator that - generated this event - - - - Object that is passed to worker threads in the ThreadPool for - firing CAPS callbacks - - - - Callback to fire for this packet - - - Name of the CAPS event - - - Strongly typed decoded data - - - Reference to the simulator that generated this event - - - - - - - - OK - - - Transfer completed - - - - - - - - - Unknown error occurred - - - Equivalent to a 404 error - - - Client does not have permission for that resource - - - Unknown status - - - - - - - - - - - Unknown - - - Virtually all asset transfers use this channel - - - - - - - - - - - Asset from the asset server - - - Inventory item - - - Estate asset, such as an estate covenant - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Image file format - - - - - - - - - Number of milliseconds passed since the last transfer - packet was received - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Texture download cache - - - - Default constructor - - A reference to the GridClient object - - - - Request an asset download - - Asset UUID - Asset type, must be correct for the transfer to succeed - Whether to give this transfer an elevated priority - The callback to fire when the simulator responds with the asset data - - - - Request an asset download - - Asset UUID - Asset type, must be correct for the transfer to succeed - Whether to give this transfer an elevated priority - Source location of the requested asset - The callback to fire when the simulator responds with the asset data - - - - Request an asset download through the almost deprecated Xfer system - - Filename of the asset to request - Whether or not to delete the asset - off the server after it is retrieved - Use large transfer packets or not - UUID of the file to request, if filename is - left empty - Asset type of vFileID, or - AssetType.Unknown if filename is not empty - Sets the FilePath in the request to Cache - (4) if true, otherwise Unknown (0) is used - - - - - - - Use UUID.Zero if you do not have the - asset ID but have all the necessary permissions - The item ID of this asset in the inventory - Use UUID.Zero if you are not requesting an - asset from an object inventory - The owner of this asset - Asset type - Whether to prioritize this asset download or not - - - - Used to force asset data into the PendingUpload property, ie: for raw terrain uploads - - An AssetUpload object containing the data to upload to the simulator - - - - Request an asset be uploaded to the simulator - - The Object containing the asset data - If True, the asset once uploaded will be stored on the simulator - in which the client was connected in addition to being stored on the asset server - The of the transfer, can be used to correlate the upload with - events being fired - - - - Request an asset be uploaded to the simulator - - The of the asset being uploaded - A byte array containing the encoded asset data - If True, the asset once uploaded will be stored on the simulator - in which the client was connected in addition to being stored on the asset server - The of the transfer, can be used to correlate the upload with - events being fired - - - - Request an asset be uploaded to the simulator - - - Asset type to upload this data as - A byte array containing the encoded asset data - If True, the asset once uploaded will be stored on the simulator - in which the client was connected in addition to being stored on the asset server - The of the transfer, can be used to correlate the upload with - events being fired - - - - Initiate an asset upload - - The ID this asset will have if the - upload succeeds - Asset type to upload this data as - Raw asset data to upload - Whether to store this asset on the local - simulator or the grid-wide asset server - The tranaction id for the upload - The transaction ID of this transfer - - - - Request a texture asset from the simulator using the system to - manage the requests and re-assemble the image from the packets received from the simulator - - The of the texture asset to download - The of the texture asset. - Use for most textures, or for baked layer texture assets - A float indicating the requested priority for the transfer. Higher priority values tell the simulator - to prioritize the request before lower valued requests. An image already being transferred using the can have - its priority changed by resending the request with the new priority value - Number of quality layers to discard. - This controls the end marker of the data sent - The packet number to begin the request at. A value of 0 begins the request - from the start of the asset texture - The callback to fire when the image is retrieved. The callback - will contain the result of the request and the texture asset data - If true, the callback will be fired for each chunk of the downloaded image. - The callback asset parameter will contain all previously received chunks of the texture asset starting - from the beginning of the request - - Request an image and fire a callback when the request is complete - - Client.Assets.RequestImage(UUID.Parse("c307629f-e3a1-4487-5e88-0d96ac9d4965"), ImageType.Normal, TextureDownloader_OnDownloadFinished); - - private void TextureDownloader_OnDownloadFinished(TextureRequestState state, AssetTexture asset) - { - if(state == TextureRequestState.Finished) - { - Console.WriteLine("Texture {0} ({1} bytes) has been successfully downloaded", - asset.AssetID, - asset.AssetData.Length); - } - } - - Request an image and use an inline anonymous method to handle the downloaded texture data - - Client.Assets.RequestImage(UUID.Parse("c307629f-e3a1-4487-5e88-0d96ac9d4965"), ImageType.Normal, delegate(TextureRequestState state, AssetTexture asset) - { - if(state == TextureRequestState.Finished) - { - Console.WriteLine("Texture {0} ({1} bytes) has been successfully downloaded", - asset.AssetID, - asset.AssetData.Length); - } - } - ); - - Request a texture, decode the texture to a bitmap image and apply it to a imagebox - - Client.Assets.RequestImage(UUID.Parse("c307629f-e3a1-4487-5e88-0d96ac9d4965"), ImageType.Normal, TextureDownloader_OnDownloadFinished); - - private void TextureDownloader_OnDownloadFinished(TextureRequestState state, AssetTexture asset) - { - if(state == TextureRequestState.Finished) - { - ManagedImage imgData; - Image bitmap; - - if (state == TextureRequestState.Finished) - { - OpenJPEG.DecodeToImage(assetTexture.AssetData, out imgData, out bitmap); - picInsignia.Image = bitmap; - } - } - } - - - - - - Overload: Request a texture asset from the simulator using the system to - manage the requests and re-assemble the image from the packets received from the simulator - - The of the texture asset to download - The callback to fire when the image is retrieved. The callback - will contain the result of the request and the texture asset data - - - - Overload: Request a texture asset from the simulator using the system to - manage the requests and re-assemble the image from the packets received from the simulator - - The of the texture asset to download - The of the texture asset. - Use for most textures, or for baked layer texture assets - The callback to fire when the image is retrieved. The callback - will contain the result of the request and the texture asset data - - - - Overload: Request a texture asset from the simulator using the system to - manage the requests and re-assemble the image from the packets received from the simulator - - The of the texture asset to download - The of the texture asset. - Use for most textures, or for baked layer texture assets - The callback to fire when the image is retrieved. The callback - will contain the result of the request and the texture asset data - If true, the callback will be fired for each chunk of the downloaded image. - The callback asset parameter will contain all previously received chunks of the texture asset starting - from the beginning of the request - - - - Cancel a texture request - - The texture assets - - - - Lets TexturePipeline class fire the progress event - - The texture ID currently being downloaded - the number of bytes transferred - the total number of bytes expected - - - - Packet Handler for InitiateDownloadPacket, sent in response to EstateOwnerMessage - requesting download of simulators RAW terrain file. - - The InitiateDownloadPacket packet - The simulator originating the packet - Only the Estate Owner will receive this when he/she makes the request - - - - - - - - - - - - Fired when the simulator sends an InitiateDownloadPacket, used to download terrain .raw files - - - Fired when during texture downloads to indicate the progress of the download - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Callback fired when an InitiateDownload packet is received - - The filename on the simulator - The name of the file the viewer requested - - - - Fired when a texture is in the process of being downloaded by the TexturePipeline class - - The asset textures - The total number of bytes received - The total number of bytes expected - - - - Class that handles the local asset cache - - - - - Default constructor - - A reference to the GridClient object - - - - Disposes cleanup timer - - - - - Only create timer when needed - - - - - Return bytes read from the local asset cache, null if it does not exist - - UUID of the asset we want to get - Raw bytes of the asset, or null on failure - - - - Returns ImageDownload object of the - image from the local image cache, null if it does not exist - - UUID of the image we want to get - ImageDownload object containing the image, or null on failure - - - - Constructs a file name of the cached asset - - UUID of the asset - String with the file name of the cahced asset - - - - Saves an asset to the local cache - - UUID of the asset - Raw bytes the asset consists of - Weather the operation was successfull - - - - Get the file name of the asset stored with gived UUID - - UUID of the asset - Null if we don't have that UUID cached on disk, file name if found in the cache folder - - - - Checks if the asset exists in the local cache - - UUID of the asset - True is the asset is stored in the cache, otherwise false - - - - Wipes out entire cache - - - - - Brings cache size to the 90% of the max size - - - - - Asynchronously brings cache size to the 90% of the max size - - - - - Adds up file sizes passes in a FileInfo array - - - - - Checks whether caching is enabled - - - - - Periodically prune the cache - - - - - Nicely formats file sizes - - Byte size we want to output - String with humanly readable file size - - - - Allows setting weather to periodicale prune the cache if it grows too big - Default is enabled, when caching is enabled - - - - - How long (in ms) between cache checks (default is 5 min.) - - - - - Helper class for sorting files by their last accessed time - - - - - - - - - - Initialize the UDP packet handler in server mode - - Port to listening for incoming UDP packets on - - - - Initialize the UDP packet handler in client mode - - Remote UDP server to connect to - - - - - - - - - - - - - - - - - - - Reads in a byte array of an Animation Asset created by the SecondLife(tm) client. - - - - - Rotation Keyframe count (used internally) - - - - - Position Keyframe count (used internally) - - - - - Animation Priority - - - - - The animation length in seconds. - - - - - Expression set in the client. Null if [None] is selected - - - - - The time in seconds to start the animation - - - - - The time in seconds to end the animation - - - - - Loop the animation - - - - - Meta data. Ease in Seconds. - - - - - Meta data. Ease out seconds. - - - - - Meta Data for the Hand Pose - - - - - Number of joints defined in the animation - - - - - Contains an array of joints - - - - - Searialize an animation asset into it's joints/keyframes/meta data - - - - - - Variable length strings seem to be null terminated in the animation asset.. but.. - use with caution, home grown. - advances the index. - - The animation asset byte array - The offset to start reading - a string - - - - Read in a Joint from an animation asset byte array - Variable length Joint fields, yay! - Advances the index - - animation asset byte array - Byte Offset of the start of the joint - The Joint data serialized into the binBVHJoint structure - - - - Read Keyframes of a certain type - advance i - - Animation Byte array - Offset in the Byte Array. Will be advanced - Number of Keyframes - Scaling Min to pass to the Uint16ToFloat method - Scaling Max to pass to the Uint16ToFloat method - - - - - A Joint and it's associated meta data and keyframes - - - - - Name of the Joint. Matches the avatar_skeleton.xml in client distros - - - - - Joint Animation Override? Was the same as the Priority in testing.. - - - - - Array of Rotation Keyframes in order from earliest to latest - - - - - Array of Position Keyframes in order from earliest to latest - This seems to only be for the Pelvis? - - - - - A Joint Keyframe. This is either a position or a rotation. - - - - - Either a Vector3 position or a Vector3 Euler rotation - - - - - Poses set in the animation metadata for the hands. - - - - - Image width - - - - - Image height - - - - - Image channel flags - - - - - Red channel data - - - - - Green channel data - - - - - Blue channel data - - - - - Alpha channel data - - - - - Bump channel data - - - - - Create a new blank image - - width - height - channel flags - - - - - - - - - - Convert the channels in the image. Channels are created or destroyed as required. - - new channel flags - - - - Resize or stretch the image using nearest neighbor (ugly) resampling - - new width - new height - - - - Create a byte array containing 32-bit RGBA data with a bottom-left - origin, suitable for feeding directly into OpenGL - - A byte array containing raw texture data - - - - Plays a sound in the current region at full volume from avatar position - - UUID of the sound to be played - - - - Plays a sound in the current region at full volume - - UUID of the sound to be played. - position for the sound to be played at. Normally the avatar. - - - - Plays a sound in the current region - - UUID of the sound to be played. - position for the sound to be played at. Normally the avatar. - volume of the sound, from 0.0 to 1.0 - - - - Plays a sound in the specified sim - - UUID of the sound to be played. - UUID of the sound to be played. - position for the sound to be played at. Normally the avatar. - volume of the sound, from 0.0 to 1.0 - - - - Plays a sound - - UUID of the sound to be played. - handle id for the sim to be played in. - position for the sound to be played at. Normally the avatar. - volume of the sound, from 0.0 to 1.0 - - - - Type of return to use when returning objects from a parcel - - - - - - - Return objects owned by parcel owner - - - Return objects set to group - - - Return objects not owned by parcel owner or set to group - - - Return a specific list of objects on parcel - - - Return objects that are marked for-sale - - - - Blacklist/Whitelist flags used in parcels Access List - - - - Agent is denied access - - - Agent is granted access - - - - The result of a request for parcel properties - - - - No matches were found for the request - - - Request matched a single parcel - - - Request matched multiple parcels - - - - Flags used in the ParcelAccessListRequest packet to specify whether - we want the access list (whitelist), ban list (blacklist), or both - - - - Request the access list - - - Request the ban list - - - Request both White and Black lists - - - - Sequence ID in ParcelPropertiesReply packets (sent when avatar - tries to cross a parcel border) - - - - Parcel is currently selected - - - Parcel restricted to a group the avatar is not a - member of - - - Avatar is banned from the parcel - - - Parcel is restricted to an access list that the - avatar is not on - - - Response to hovering over a parcel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Reasons agent is denied access to a parcel on the simulator - - - - Agent is not denied, access is granted - - - Agent is not a member of the group set for the parcel, or which owns the parcel - - - Agent is not on the parcels specific allow list - - - Agent is on the parcels ban list - - - Unknown - - - Agent is not age verified and parcel settings deny access to non age verified avatars - - - - Parcel overlay type. This is used primarily for highlighting and - coloring which is why it is a single integer instead of a set of - flags - - These values seem to be poorly thought out. The first three - bits represent a single value, not flags. For example Auction (0x05) is - not a combination of OwnedByOther (0x01) and ForSale(0x04). However, - the BorderWest and BorderSouth values are bit flags that get attached - to the value stored in the first three bits. Bits four, five, and six - are unused - - - Public land - - - Land is owned by another avatar - - - Land is owned by a group - - - Land is owned by the current avatar - - - Land is for sale - - - Land is being auctioned - - - To the west of this area is a parcel border - - - To the south of this area is a parcel border - - - - Various parcel properties - - - - No flags set - - - Allow avatars to fly (a client-side only restriction) - - - Allow foreign scripts to run - - - This parcel is for sale - - - Allow avatars to create a landmark on this parcel - - - Allows all avatars to edit the terrain on this parcel - - - Avatars have health and can take damage on this parcel. - If set, avatars can be killed and sent home here - - - Foreign avatars can create objects here - - - All objects on this parcel can be purchased - - - Access is restricted to a group - - - Access is restricted to a whitelist - - - Ban blacklist is enabled - - - Unknown - - - List this parcel in the search directory - - - Allow personally owned parcels to be deeded to group - - - If Deeded, owner contributes required tier to group parcel is deeded to - - - Restrict sounds originating on this parcel to the - parcel boundaries - - - Objects on this parcel are sold when the land is - purchsaed - - - Allow this parcel to be published on the web - - - The information for this parcel is mature content - - - The media URL is an HTML page - - - The media URL is a raw HTML string - - - Restrict foreign object pushes - - - Ban all non identified/transacted avatars - - - Allow group-owned scripts to run - - - Allow object creation by group members or group - objects - - - Allow all objects to enter this parcel - - - Only allow group and owner objects to enter this parcel - - - Voice Enabled on this parcel - - - Use Estate Voice channel for Voice on this parcel - - - Deny Age Unverified Users - - - - Parcel ownership status - - - - Placeholder - - - Parcel is leased (owned) by an avatar or group - - - Parcel is in process of being leased (purchased) by an avatar or group - - - Parcel has been abandoned back to Governor Linden - - - - Category parcel is listed in under search - - - - No assigned category - - - Linden Infohub or public area - - - Adult themed area - - - Arts and Culture - - - Business - - - Educational - - - Gaming - - - Hangout or Club - - - Newcomer friendly - - - Parks and Nature - - - Residential - - - Shopping - - - Not Used? - - - Other - - - Not an actual category, only used for queries - - - - Type of teleport landing for a parcel - - - - Unset, simulator default - - - Specific landing point set for this parcel - - - No landing point set, direct teleports enabled for - this parcel - - - - Parcel Media Command used in ParcelMediaCommandMessage - - - - Stop the media stream and go back to the first frame - - - Pause the media stream (stop playing but stay on current frame) - - - Start the current media stream playing and stop when the end is reached - - - Start the current media stream playing, - loop to the beginning when the end is reached and continue to play - - - Specifies the texture to replace with video - If passing the key of a texture, it must be explicitly typecast as a key, - not just passed within double quotes. - - - Specifies the movie URL (254 characters max) - - - Specifies the time index at which to begin playing - - - Specifies a single agent to apply the media command to - - - Unloads the stream. While the stop command sets the texture to the first frame of the movie, - unload resets it to the real texture that the movie was replacing. - - - Turn on/off the auto align feature, similar to the auto align checkbox in the parcel media properties - (NOT to be confused with the "align" function in the textures view of the editor!) Takes TRUE or FALSE as parameter. - - - Allows a Web page or image to be placed on a prim (1.19.1 RC0 and later only). - Use "text/html" for HTML. - - - Resizes a Web page to fit on x, y pixels (1.19.1 RC0 and later only). - This might still not be working - - - Sets a description for the media being displayed (1.19.1 RC0 and later only). - - - - Some information about a parcel of land returned from a DirectoryManager search - - - - Global Key of record - - - Parcel Owners - - - Name field of parcel, limited to 128 characters - - - Description field of parcel, limited to 256 characters - - - Total Square meters of parcel - - - Total area billable as Tier, for group owned land this will be 10% less than ActualArea - - - True of parcel is in Mature simulator - - - Grid global X position of parcel - - - Grid global Y position of parcel - - - Grid global Z position of parcel (not used) - - - Name of simulator parcel is located in - - - Texture of parcels display picture - - - Float representing calculated traffic based on time spent on parcel by avatars - - - Sale price of parcel (not used) - - - Auction ID of parcel - - - - Parcel Media Information - - - - A byte, if 0x1 viewer should auto scale media to fit object - - - A boolean, if true the viewer should loop the media - - - The Asset UUID of the Texture which when applied to a - primitive will display the media - - - A URL which points to any Quicktime supported media type - - - A description of the media - - - An Integer which represents the height of the media - - - An integer which represents the width of the media - - - A string which contains the mime type of the media - - - - Parcel of land, a portion of virtual real estate in a simulator - - - - - - - - - - - - - Simulator-local ID of this parcel - - - UUID of the owner of this parcel - - - Whether the land is deeded to a group or not - - - - - - Date land was claimed - - - Appears to always be zero - - - This field is no longer used - - - Minimum corner of the axis-aligned bounding box for this - parcel - - - Maximum corner of the axis-aligned bounding box for this - parcel - - - Bitmap describing land layout in 4x4m squares across the - entire region - - - Total parcel land area - - - - - - Maximum primitives across the entire simulator - - - Total primitives across the entire simulator - - - Maximum number of primitives this parcel supports - - - Total number of primitives on this parcel - - - Total number of primitives owned by the parcel owner on - this parcel - - - Total number of primitives owned by the parcel group on - this parcel - - - Total number of other primitives on this parcel - - - - - - Autoreturn value in minutes for others' objects - - - - - - Sale price of the parcel, only useful if ForSale is set - The SalePrice will remain the same after an ownership - transfer (sale), so it can be used to see the purchase price after - a sale if the new owner has not changed it - - - Parcel Name - - - Parcel Description - - - URL For Music Stream - - - - - - Price for a temporary pass - - - How long is pass valid for - - - - - - Key of authorized buyer - - - Key of parcel snapshot - - - - - - - - - - - - - - - - - - - - - Access list of who is whitelisted on this - parcel - - - Access list of who is blacklisted on this - parcel - - - TRUE of region denies access to age unverified users - - - true to obscure (hide) media url - - - true to obscure (hide) music url - - - A struct containing media details - - - - Displays a parcel object in string format - - string containing key=value pairs of a parcel object - - - - Defalt constructor - - Local ID of this parcel - - - - Update the simulator with any local changes to this Parcel object - - Simulator to send updates to - Whether we want the simulator to confirm - the update with a reply packet or not - - - - Set Autoreturn time - - Simulator to send the update to - - - - Parcel (subdivided simulator lots) subsystem - - - - - Default constructor - - A reference to the GridClient object - - - - Request basic information for a single parcel - - Simulator-local ID of the parcel - - - - Request properties of a single parcel - - Simulator containing the parcel - Simulator-local ID of the parcel - An arbitrary integer that will be returned - with the ParcelProperties reply, useful for distinguishing between - multiple simultaneous requests - - - - Request the access list for a single parcel - - Simulator containing the parcel - Simulator-local ID of the parcel - An arbitrary integer that will be returned - with the ParcelAccessList reply, useful for distinguishing between - multiple simultaneous requests - - - - - Request properties of parcels using a bounding box selection - - Simulator containing the parcel - Northern boundary of the parcel selection - Eastern boundary of the parcel selection - Southern boundary of the parcel selection - Western boundary of the parcel selection - An arbitrary integer that will be returned - with the ParcelProperties reply, useful for distinguishing between - different types of parcel property requests - A boolean that is returned with the - ParcelProperties reply, useful for snapping focus to a single - parcel - - - - Request all simulator parcel properties (used for populating the Simulator.Parcels - dictionary) - - Simulator to request parcels from (must be connected) - - - - Request all simulator parcel properties (used for populating the Simulator.Parcels - dictionary) - - Simulator to request parcels from (must be connected) - If TRUE, will force a full refresh - Number of milliseconds to pause in between each request - - - - Request the dwell value for a parcel - - Simulator containing the parcel - Simulator-local ID of the parcel - - - - Send a request to Purchase a parcel of land - - The Simulator the parcel is located in - The parcels region specific local ID - true if this parcel is being purchased by a group - The groups - true to remove tier contribution if purchase is successful - The parcels size - The purchase price of the parcel - - - - - Reclaim a parcel of land - - The simulator the parcel is in - The parcels region specific local ID - - - - Deed a parcel to a group - - The simulator the parcel is in - The parcels region specific local ID - The groups - - - - Request prim owners of a parcel of land. - - Simulator parcel is in - The parcels region specific local ID - - - - Return objects from a parcel - - Simulator parcel is in - The parcels region specific local ID - the type of objects to return, - A list containing object owners s to return - - - - Subdivide (split) a parcel - - - - - - - - - - Join two parcels of land creating a single parcel - - - - - - - - - - Get a parcels LocalID - - Simulator parcel is in - Vector3 position in simulator (Z not used) - 0 on failure, or parcel LocalID on success. - A call to Parcels.RequestAllSimParcels is required to populate map and - dictionary. - - - - Terraform (raise, lower, etc) an area or whole parcel of land - - Simulator land area is in. - LocalID of parcel, or -1 if using bounding box - From Enum, Raise, Lower, Level, Smooth, Etc. - Size of area to modify - true on successful request sent. - Settings.STORE_LAND_PATCHES must be true, - Parcel information must be downloaded using RequestAllSimParcels() - - - - Terraform (raise, lower, etc) an area or whole parcel of land - - Simulator land area is in. - west border of area to modify - south border of area to modify - east border of area to modify - north border of area to modify - From Enum, Raise, Lower, Level, Smooth, Etc. - Size of area to modify - true on successful request sent. - Settings.STORE_LAND_PATCHES must be true, - Parcel information must be downloaded using RequestAllSimParcels() - - - - Terraform (raise, lower, etc) an area or whole parcel of land - - Simulator land area is in. - LocalID of parcel, or -1 if using bounding box - west border of area to modify - south border of area to modify - east border of area to modify - north border of area to modify - From Enum, Raise, Lower, Level, Smooth, Etc. - Size of area to modify - How many meters + or - to lower, 1 = 1 meter - true on successful request sent. - Settings.STORE_LAND_PATCHES must be true, - Parcel information must be downloaded using RequestAllSimParcels() - - - - Terraform (raise, lower, etc) an area or whole parcel of land - - Simulator land area is in. - LocalID of parcel, or -1 if using bounding box - west border of area to modify - south border of area to modify - east border of area to modify - north border of area to modify - From Enum, Raise, Lower, Level, Smooth, Etc. - Size of area to modify - How many meters + or - to lower, 1 = 1 meter - Height at which the terraform operation is acting at - - - - Sends a request to the simulator to return a list of objects owned by specific owners - - Simulator local ID of parcel - Owners, Others, Etc - List containing keys of avatars objects to select; - if List is null will return Objects of type selectType - Response data is returned in the event - - - - Eject and optionally ban a user from a parcel - - target key of avatar to eject - true to also ban target - - - - Freeze or unfreeze an avatar over your land - - target key to freeze - true to freeze, false to unfreeze - - - - Abandon a parcel of land - - Simulator parcel is in - Simulator local ID of parcel - - - - Requests the UUID of the parcel in a remote region at a specified location - - Location of the parcel in the remote region - Remote region handle - Remote region UUID - If successful UUID of the remote parcel, UUID.Zero otherwise - - - - ParcelProperties replies sent over CAPS - - Not used (will always be ParcelProperties) - IMessage object containing decoded data from OSD - Object representing simulator - - - - - - - - - - - Decode the prim owner information, send the decoded object to any event subscribers - - - IMessage object containing decoded data from OSD - - - - - - - - - - - Fired when a is received, - in response to a - - - Fired when a is received, - in response to a - - - Fired when a ParcelProperties Packet is received over the subsystem, - in response to a - - - Fired when a is received, - in response to a - - - Fired when the Agent receives a , - in response to - - - Fired when the simulator parcel dictionary is populated in response - to a request - - - Fired when the Agent receives a , - in response to a request - - - Fired when the Agent receives a which - occurs when the parcel media information is changed for the current parcel the Agent is over - - - Fired when the Agent receives a which - occurs when the parcel media has a specialized event like starting and looping command on the media is raised - for the current parcel the Agent is over - - - - Parcel Accesslist - - - - Agents - - - - - - Flags for specific entry in white/black lists - - - - Owners of primitives on parcel - - - - Prim Owners - - - True of owner is group - - - Total count of prims owned by OwnerID - - - true of OwnerID is currently online and is not a group - - - The date of the most recent prim left by OwnerID - - - - - - UUID of the requested parcel - Simulator-local ID of the requested parcel - Dwell value of the requested parcel - - - - - - - - - - - - Simulator the parcel is in - Full properties for a single parcel. If result - is NoData this will be incomplete or incorrect data - Success of the query - Number of primitives your avatar is currently - selecting and sitting on in this parcel - User-assigned identifier for the query - User-assigned boolean for the query - - - - - - Simulator the parcel is in - - - - - - - - Responses to a request for prim owners on a parcel - - simulator parcel is in - List containing details or prim ownership - - - - Fired when all parcels are downloaded from simulator - - Simulator the parcel is in - Read-only dictionary containing parcel details for the simulator - 64,64 array containing sim position to localID mapping - - - - Fired in response to SelectParcelObjects - - simulator the objects are in - Local IDs of the selected objects - If true, list is start of a new selection - - - - Fired when a ParcelMediaUpdate packet is received, this occurs when the media on the parcel an avatar - is over changes - - A reference to the simulator object - A struct containing updated media information - - - - Fired when a ParcelMediaCommandMessage packet is received, this occurs when the media on the parcel sends a specialized event - - A reference to the simulator object - The sequence the parcel command belongs to - Updated parcel information - The command executed on the Parcel - The time operand for some parcel commands - - - - A Name Value pair with additional settings, used in the protocol - primarily to transmit avatar names and active group in object packets - - - - - - - - - - - - - - - - - - - - Constructor that takes all the fields as parameters - - - - - - - - - - Constructor that takes a single line from a NameValue field - - - - - Type of the value - - - Unknown - - - String value - - - - - - - - - - - - - - - Deprecated - - - String value, but designated as an asset - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Singleton logging class for the entire library - - - - log4net logging engine - - - - Default constructor - - - - - Send a log message to the logging engine - - The log message - The severity of the log entry - - - - Send a log message to the logging engine - - The log message - The severity of the log entry - Instance of the client - - - - Send a log message to the logging engine - - The log message - The severity of the log entry - Exception that was raised - - - - Send a log message to the logging engine - - The log message - The severity of the log entry - Instance of the client - Exception that was raised - - - - If the library is compiled with DEBUG defined, an event will be - fired if an OnLogMessage handler is registered and the - message will be sent to the logging engine - - The message to log at the DEBUG level to the - current logging engine - - - - If the library is compiled with DEBUG defined and - GridClient.Settings.DEBUG is true, an event will be - fired if an OnLogMessage handler is registered and the - message will be sent to the logging engine - - The message to log at the DEBUG level to the - current logging engine - Instance of the client - - - Triggered whenever a message is logged. If this is left - null, log messages will go to the console - - - - Callback used for client apps to receive log messages from - the library - - Data being logged - The severity of the log entry from - - - - Static helper functions and global variables - - - - This header flag signals that ACKs are appended to the packet - - - This header flag signals that this packet has been sent before - - - This header flags signals that an ACK is expected for this packet - - - This header flag signals that the message is compressed using zerocoding - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Given an X/Y location in absolute (grid-relative) terms, a region - handle is returned along with the local X/Y location in that region - - The absolute X location, a number such as - 255360.35 - The absolute Y location, a number such as - 255360.35 - The sim-local X position of the global X - position, a value from 0.0 to 256.0 - The sim-local Y position of the global Y - position, a value from 0.0 to 256.0 - A 64-bit region handle that can be used to teleport to - - - - Converts a floating point number to a terse string format used for - transmitting numbers in wearable asset files - - Floating point number to convert to a string - A terse string representation of the input number - - - - Convert a variable length field (byte array) to a string, with a - field name prepended to each line of the output - - If the byte array has unprintable characters in it, a - hex dump will be written instead - The StringBuilder object to write to - The byte array to convert to a string - A field name to prepend to each line of output - - - - Decode a zerocoded byte array, used to decompress packets marked - with the zerocoded flag - - Any time a zero is encountered, the next byte is a count - of how many zeroes to expand. One zero is encoded with 0x00 0x01, - two zeroes is 0x00 0x02, three zeroes is 0x00 0x03, etc. The - first four bytes are copied directly to the output buffer. - - The byte array to decode - The length of the byte array to decode. This - would be the length of the packet up to (but not including) any - appended ACKs - The output byte array to decode to - The length of the output buffer - - - - Encode a byte array with zerocoding. Used to compress packets marked - with the zerocoded flag. Any zeroes in the array are compressed down - to a single zero byte followed by a count of how many zeroes to expand - out. A single zero becomes 0x00 0x01, two zeroes becomes 0x00 0x02, - three zeroes becomes 0x00 0x03, etc. The first four bytes are copied - directly to the output buffer. - - The byte array to encode - The length of the byte array to encode - The output byte array to encode to - The length of the output buffer - - - - Calculates the CRC (cyclic redundancy check) needed to upload inventory. - - Creation date - Sale type - Inventory type - Type - Asset ID - Group ID - Sale price - Owner ID - Creator ID - Item ID - Folder ID - Everyone mask (permissions) - Flags - Next owner mask (permissions) - Group mask (permissions) - Owner mask (permisions) - The calculated CRC - - - - Attempts to load a file embedded in the assembly - - The filename of the resource to load - A Stream for the requested file, or null if the resource - was not successfully loaded - - - - Attempts to load a file either embedded in the assembly or found in - a given search path - - The filename of the resource to load - An optional path that will be searched if - the asset is not found embedded in the assembly - A Stream for the requested file, or null if the resource - was not successfully loaded - - - - Converts a list of primitives to an object that can be serialized - with the LLSD system - - Primitives to convert to a serializable object - An object that can be serialized with LLSD - - - - Deserializes OSD in to a list of primitives - - Structure holding the serialized primitive list, - must be of the SDMap type - A list of deserialized primitives - - - - Passed to Logger.Log() to identify the severity of a log entry - - - - No logging information will be output - - - Non-noisy useful information, may be helpful in - debugging a problem - - - A non-critical error occurred. A warning will not - prevent the rest of the library from operating as usual, - although it may be indicative of an underlying issue - - - A critical error has occurred. Generally this will - be followed by the network layer shutting down, although the - stability of the library after an error is uncertain - - - Used for internal testing, this logging level can - generate very noisy (long and/or repetitive) messages. Don't - pass this to the Log() function, use DebugLog() instead. - - - - - Represents a primitive asset - - - - Initializes a new instance of an AssetPrim object - - - - - - - - - - - - - - Override the base classes AssetType - - - - Only used internally for XML serialization/deserialization - - - - - The current status of a texture request as it moves through the pipeline or final result of a texture request. - - - - The initial state given to a request. Requests in this state - are waiting for an available slot in the pipeline - - - A request that has been added to the pipeline and the request packet - has been sent to the simulator - - - A request that has received one or more packets back from the simulator - - - A request that has received all packets back from the simulator - - - A request that has taken longer than - to download OR the initial packet containing the packet information was never received - - - The texture request was aborted by request of the agent - - - The simulator replied to the request that it was not able to find the requested texture - - - - A callback fired to indicate the status or final state of the requested texture. For progressive - downloads this will fire each time new asset data is returned from the simulator. - - The indicating either Progress for textures not fully downloaded, - or the final result of the request after it has been processed through the TexturePipeline - The object containing the Assets ID, raw data - and other information. For progressive rendering the will contain - the data from the beginning of the file. For failed, aborted and timed out requests it will contain - an empty byte array. - - - - Texture request download handler, allows a configurable number of download slots which manage multiple - concurrent texture downloads from the - - This class makes full use of the internal - system for full texture downloads. - - - A dictionary containing all pending and in-process transfer requests where the Key is both the RequestID - and also the Asset Texture ID, and the value is an object containing the current state of the request and also - the asset data as it is being re-assembled - - - Holds the reference to the client object - - - Maximum concurrent texture requests allowed at a time - - - An array of objects used to manage worker request threads - - - An array of worker slots which shows the availablity status of the slot - - - The primary thread which manages the requests. - - - true if the TexturePipeline is currently running - - - A synchronization object used by the primary thread - - - A refresh timer used to increase the priority of stalled requests - - - - Default constructor, Instantiates a new copy of the TexturePipeline class - - Reference to the instantiated object - - - - Initialize callbacks required for the TexturePipeline to operate - - - - - Shutdown the TexturePipeline and cleanup any callbacks or transfers - - - - - Request a texture asset from the simulator using the system to - manage the requests and re-assemble the image from the packets received from the simulator - - The of the texture asset to download - The of the texture asset. - Use for most textures, or for baked layer texture assets - A float indicating the requested priority for the transfer. Higher priority values tell the simulator - to prioritize the request before lower valued requests. An image already being transferred using the can have - its priority changed by resending the request with the new priority value - Number of quality layers to discard. - This controls the end marker of the data sent - The packet number to begin the request at. A value of 0 begins the request - from the start of the asset texture - The callback to fire when the image is retrieved. The callback - will contain the result of the request and the texture asset data - If true, the callback will be fired for each chunk of the downloaded image. - The callback asset parameter will contain all previously received chunks of the texture asset starting - from the beginning of the request - - - - Sends the actual request packet to the simulator - - The image to download - Type of the image to download, either a baked - avatar texture or a normal texture - Priority level of the download. Default is - 1,013,000.0f - Number of quality layers to discard. - This controls the end marker of the data sent - Packet number to start the download at. - This controls the start marker of the data sent - Sending a priority of 0 and a discardlevel of -1 aborts - download - - - - Cancel a pending or in process texture request - - The texture assets unique ID - - - - Master Download Thread, Queues up downloads in the threadpool - - - - - The worker thread that sends the request and handles timeouts - - A object containing the request details - - - - Handle responses from the simulator that tell us a texture we have requested is unable to be located - or no longer exists. This will remove the request from the pipeline and free up a slot if one is in use - - The - The sending this packet - - - - Handles the remaining Image data that did not fit in the initial ImageData packet - - - - - Handle the initial ImageDataPacket sent from the simulator - - - - - - Current number of pending and in-process transfers - - - - A request task containing information and status of a request as it is processed through the - - - - The current which identifies the current status of the request - - - The Unique Request ID, This is also the Asset ID of the texture being requested - - - The slot this request is occupying in the threadpoolSlots array - - - The ImageType of the request. - - - The callback to fire when the request is complete, will include - the and the - object containing the result data - - - If true, indicates the callback will be fired whenever new data is returned from the simulator. - This is used to progressively render textures as portions of the texture are received. - - - An object that maintains the data of an request thats in-process. - - - - Wrapper around a byte array that allows bit to be packed and unpacked - one at a time or by a variable amount. Useful for very tightly packed - data like LayerData packets - - - - - - - - Default constructor, initialize the bit packer / bit unpacker - with a byte array and starting position - - Byte array to pack bits in to or unpack from - Starting position in the byte array - - - - Pack a floating point value in to the data - - Floating point value to pack - - - - Pack part or all of an integer in to the data - - Integer containing the data to pack - Number of bits of the integer to pack - - - - Pack part or all of an unsigned integer in to the data - - Unsigned integer containing the data to pack - Number of bits of the integer to pack - - - - - - - - - - - - - - - - - - - - - - - - - Unpacking a floating point value from the data - - Unpacked floating point value - - - - Unpack a variable number of bits from the data in to integer format - - Number of bits to unpack - An integer containing the unpacked bits - This function is only useful up to 32 bits - - - - Unpack a variable number of bits from the data in to unsigned - integer format - - Number of bits to unpack - An unsigned integer containing the unpacked bits - This function is only useful up to 32 bits - - - - Unpack a 16-bit signed integer - - 16-bit signed integer - - - - Unpack a 16-bit unsigned integer - - 16-bit unsigned integer - - - - Unpack a 32-bit signed integer - - 32-bit signed integer - - - - Unpack a 32-bit unsigned integer - - 32-bit unsigned integer - - - - - - - - - - Represents a texture - - - - A object containing image data - - - - - - - - - Initializes a new instance of an AssetTexture object - - - - Initializes a new instance of an AssetTexture object - - A unique specific to this asset - A byte array containing the raw asset data - - - - Initializes a new instance of an AssetTexture object - - A object containing texture data - - - - Populates the byte array with a JPEG2000 - encoded image created from the data in - - - - - Decodes the JPEG2000 data in AssetData to the - object - - True if the decoding was successful, otherwise false - - - - Decodes the begin and end byte positions for each quality layer in - the image - - - - - Override the base classes AssetType - - - - Represents a Sound Asset - - - - Initializes a new instance of an AssetSound object - - - Initializes a new instance of an AssetSound object with parameters - A unique specific to this asset - A byte array containing the raw asset data - - - - TODO: Encodes a sound file - - - - - TODO: Decode a sound file - - true - - - Override the base classes AssetType - - - - Represents an LSL Text object containing a string of UTF encoded characters - - - - A string of characters represting the script contents - - - Initializes a new AssetScriptText object - - - - Initializes a new AssetScriptText object with parameters - - A unique specific to this asset - A byte array containing the raw asset data - - - - Initializes a new AssetScriptText object with parameters - - A string containing the scripts contents - - - - Encode a string containing the scripts contents into byte encoded AssetData - - - - - Decode a byte array containing the scripts contents into a string - - true if decoding is successful - - - Override the base classes AssetType - - - - A single visual characteristic of an avatar mesh, such as eyebrow height - - - - Index of this visual param - - - Internal name - - - Group ID this parameter belongs to - - - Name of the wearable this parameter belongs to - - - Displayable label of this characteristic - - - Displayable label for the minimum value of this characteristic - - - Displayable label for the maximum value of this characteristic - - - Default value - - - Minimum value - - - Maximum value - - - - Set all the values through the constructor - - Index of this visual param - Internal name - - - Displayable label of this characteristic - Displayable label for the minimum value of this characteristic - Displayable label for the maximum value of this characteristic - Default value - Minimum value - Maximum value - - - - Holds the Params array of all the avatar appearance parameters - - - - - Viewer Params Array Element for AgentSetAppearance - - - - - Brow Size - Small 0--+255 Large - - - - - Nose Size - Small 0--+255 Large - - - - - Nostril Width - Narrow 0--+255 Broad - - - - - Chin Cleft - Round 0--+255 Cleft - - - - - Nose Tip Shape - Pointy 0--+255 Bulbous - - - - - Chin Angle - Chin Out 0--+255 Chin In - - - - - Chin-Neck - Tight Chin 0--+255 Double Chin - - - - - Lower Cheeks - Well-Fed 0--+255 Sunken - - - - - Upper Bridge - Low 0--+255 High - - - - - - Less 0--+255 More - - - - - Upper Chin Cleft - Round 0--+255 Cleft - - - - - Cheek Bones - Low 0--+255 High - - - - - Ear Angle - In 0--+255 Out - - - - - Eyebrow Points - Smooth 0--+255 Pointy - - - - - Jaw Shape - Pointy 0--+255 Square - - - - - Upper Cheeks - Thin 0--+255 Puffy - - - - - Nose Tip Angle - Downturned 0--+255 Upturned - - - - - Nose Thickness - Thin Nose 0--+255 Bulbous Nose - - - - - Upper Eyelid Fold - Uncreased 0--+255 Creased - - - - - Attached Earlobes - Unattached 0--+255 Attached - - - - - Eye Bags - Smooth 0--+255 Baggy - - - - - Eye Opening - Narrow 0--+255 Wide - - - - - Lip Cleft - Narrow 0--+255 Wide - - - - - Bridge Width - Narrow 0--+255 Wide - - - - - Eyebrow Arc - Flat 0--+255 Arced - - - - - Height - Short 0--+255 Tall - - - - - Body Thickness - Body Thin 0--+255 Body Thick - - - - - Ear Size - Small 0--+255 Large - - - - - Shoulders - Narrow 0--+255 Broad - - - - - Hip Width - Narrow 0--+255 Wide - - - - - - Short Torso 0--+255 Long Torso - - - - - - Short 0--+255 Long - - - - - - Darker 0--+255 Lighter - - - - - - Natural 0--+255 Unnatural - - - - - - Small 0--+255 Large - - - - - - None 0--+255 Wild - - - - - Ruddiness - Pale 0--+255 Ruddy - - - - - - Light 0--+255 Dark - - - - - - No Red 0--+255 Very Red - - - - - - Black 0--+255 Blonde - - - - - - No White 0--+255 All White - - - - - - Less Rosy 0--+255 More Rosy - - - - - - Darker 0--+255 Pinker - - - - - - Thin Eyebrows 0--+255 Bushy Eyebrows - - - - - - Short 0--+255 Long - - - - - - Short 0--+255 Long - - - - - - Short 0--+255 Long - - - - - - Short 0--+255 Long - - - - - - Short 0--+255 Long - - - - - - Short 0--+255 Long - - - - - - Sweep Forward 0--+255 Sweep Back - - - - - - Left 0--+255 Right - - - - - Middle Part - No Part 0--+255 Part - - - - - Right Part - No Part 0--+255 Part - - - - - Left Part - No Part 0--+255 Part - - - - - Full Hair Sides - Mowhawk 0--+255 Full Sides - - - - - - Less 0--+255 More - - - - - Lip Width - Narrow Lips 0--+255 Wide Lips - - - - - - Small 0--+255 Big - - - - - - Less 0--+255 More - - - - - - Less 0--+255 More - - - - - - Less 0--+255 More - - - - - - Short Sideburns 0--+255 Mutton Chops - - - - - - Chaplin 0--+255 Handlebars - - - - - - Less soul 0--+255 More soul - - - - - - Less Curtains 0--+255 More Curtains - - - - - Rumpled Hair - Smooth Hair 0--+255 Rumpled Hair - - - - - Big Hair Front - Less 0--+255 More - - - - - Big Hair Top - Less 0--+255 More - - - - - Big Hair Back - Less 0--+255 More - - - - - Spiked Hair - No Spikes 0--+255 Big Spikes - - - - - Chin Depth - Shallow 0--+255 Deep - - - - - Part Bangs - No Part 0--+255 Part Bangs - - - - - Head Shape - More Square 0--+255 More Round - - - - - Eye Spacing - Close Set Eyes 0--+255 Far Set Eyes - - - - - - Low Heels 0--+255 High Heels - - - - - - Low Platforms 0--+255 High Platforms - - - - - - Thin Lips 0--+255 Fat Lips - - - - - Mouth Position - High 0--+255 Low - - - - - Breast Buoyancy - Less Gravity 0--+255 More Gravity - - - - - Platform Width - Narrow 0--+255 Wide - - - - - - Pointy Heels 0--+255 Thick Heels - - - - - - Pointy 0--+255 Square - - - - - Foot Size - Small 0--+255 Big - - - - - Nose Width - Narrow 0--+255 Wide - - - - - Eyelash Length - Short 0--+255 Long - - - - - - Short 0--+255 Long - - - - - - Short 0--+255 Long - - - - - - Low 0--+255 High - - - - - Jacket Length - Short 0--+255 Long - - - - - Open Front - Open 0--+255 Closed - - - - - - Short 0--+255 Tall - - - - - - Short 0--+255 Long - - - - - - Short 0--+255 Long - - - - - - Low 0--+255 High - - - - - Cuff Flare - Tight Cuffs 0--+255 Flared Cuffs - - - - - - More Vertical 0--+255 More Sloped - - - - - - Less Body Fat 0--+255 More Body Fat - - - - - Pants Crotch - High and Tight 0--+255 Low and Loose - - - - - Egg Head - Chin Heavy 0--+255 Forehead Heavy - - - - - Head Stretch - Squash Head 0--+255 Stretch Head - - - - - Torso Muscles - Less Muscular 0--+255 More Muscular - - - - - Outer Eye Corner - Corner Down 0--+255 Corner Up - - - - - - Less Muscular 0--+255 More Muscular - - - - - Lip Fullness - Less Full 0--+255 More Full - - - - - Toe Thickness - Flat Toe 0--+255 Thick Toe - - - - - Crooked Nose - Nose Left 0--+255 Nose Right - - - - - - Corner Down 0--+255 Corner Up - - - - - - Shear Right Up 0--+255 Shear Left Up - - - - - Shift Mouth - Shift Left 0--+255 Shift Right - - - - - Eye Pop - Pop Right Eye 0--+255 Pop Left Eye - - - - - Jaw Jut - Overbite 0--+255 Underbite - - - - - Shear Back - Full Back 0--+255 Sheared Back - - - - - - Small Hands 0--+255 Large Hands - - - - - Love Handles - Less Love 0--+255 More Love - - - - - Head Size - Small Head 0--+255 Big Head - - - - - - Skinny Neck 0--+255 Thick Neck - - - - - Breast Cleavage - Separate 0--+255 Join - - - - - Pectorals - Big Pectorals 0--+255 Sunken Chest - - - - - Eye Size - Beady Eyes 0--+255 Anime Eyes - - - - - - Short Legs 0--+255 Long Legs - - - - - - Short Arms 0--+255 Long arms - - - - - - Pink 0--+255 Black - - - - - - No Lipstick 0--+255 More Lipstick - - - - - - No Lipgloss 0--+255 Glossy - - - - - - No Eyeliner 0--+255 Full Eyeliner - - - - - - No Blush 0--+255 More Blush - - - - - - Pink 0--+255 Orange - - - - - - Clear 0--+255 Opaque - - - - - - No Eyeshadow 0--+255 More Eyeshadow - - - - - - Light 0--+255 Dark - - - - - - No Eyeshadow 0--+255 More Eyeshadow - - - - - - No Polish 0--+255 Painted Nails - - - - - - Clear 0--+255 Opaque - - - - - - Light 0--+255 Dark - - - - - - Clear 0--+255 Opaque - - - - - - Dark Green 0--+255 Black - - - - - - Pink 0--+255 Black - - - - - - Sparse 0--+255 Dense - - - - - - 5 O'Clock Shadow 0--+255 Bushy Hair - - - - - Saddle Bags - Less Saddle 0--+255 More Saddle - - - - - Taper Back - Wide Back 0--+255 Narrow Back - - - - - Taper Front - Wide Front 0--+255 Narrow Front - - - - - - Short Neck 0--+255 Long Neck - - - - - Eyebrow Height - Higher 0--+255 Lower - - - - - Lower Bridge - Low 0--+255 High - - - - - Nostril Division - High 0--+255 Low - - - - - Jaw Angle - Low Jaw 0--+255 High Jaw - - - - - Shear Front - Full Front 0--+255 Sheared Front - - - - - - Less Volume 0--+255 More Volume - - - - - Lip Cleft Depth - Shallow 0--+255 Deep - - - - - Puffy Eyelids - Flat 0--+255 Puffy - - - - - - Sunken Eyes 0--+255 Bugged Eyes - - - - - - Flat Head 0--+255 Long Head - - - - - - Less Freckles 0--+255 More Freckles - - - - - - Low 0--+255 High - - - - - - Short Pigtails 0--+255 Long Pigtails - - - - - - Short Ponytail 0--+255 Long Ponytail - - - - - Butt Size - Flat Butt 0--+255 Big Butt - - - - - Ear Tips - Flat 0--+255 Pointy - - - - - Lip Ratio - More Upper Lip 0--+255 More Lower Lip - - - - - - Short 0--+255 Long - - - - - - Low 0--+255 High - - - - - Pants Fit - Tight Pants 0--+255 Loose Pants - - - - - Shirt Fit - Tight Shirt 0--+255 Loose Shirt - - - - - Sleeve Looseness - Tight Sleeves 0--+255 Loose Sleeves - - - - - Knee Angle - Knock Kneed 0--+255 Bow Legged - - - - - - Short hips 0--+255 Long Hips - - - - - - Fingerless 0--+255 Fingers - - - - - bustle skirt - no bustle 0--+255 more bustle - - - - - - Short 0--+255 Long - - - - - - Open Front 0--+255 Closed Front - - - - - - Open Back 0--+255 Closed Back - - - - - - Open Left 0--+255 Closed Left - - - - - - Open Right 0--+255 Closed Right - - - - - Skirt Fit - Tight Skirt 0--+255 Poofy Skirt - - - - - Jacket Wrinkles - No Wrinkles 0--+255 Wrinkles - - - - - Package - Coin Purse 0--+255 Duffle Bag - - - - - Inner Eye Corner - Corner Down 0--+255 Corner Up - - - - - - - - - - An instance of DelegateWrapper which calls InvokeWrappedDelegate, - which in turn calls the DynamicInvoke method of the wrapped - delegate - - - - - Callback used to call EndInvoke on the asynchronously - invoked DelegateWrapper - - - - - Executes the specified delegate with the specified arguments - asynchronously on a thread pool thread - - - - - - - Invokes the wrapped delegate synchronously - - - - - - - Calls EndInvoke on the wrapper and Close on the resulting WaitHandle - to prevent resource leaks - - - - - - Delegate to wrap another delegate and its arguments - - - - - - Size of the byte array used to store raw packet data - - - Raw packet data buffer - - - Length of the data to transmit - - - EndPoint of the remote host - - - - Create an allocated UDP packet buffer for receiving a packet - - - - - Create an allocated UDP packet buffer for sending a packet - - EndPoint of the remote host - - - - Create an allocated UDP packet buffer for sending a packet - - EndPoint of the remote host - Size of the buffer to allocate for packet data - - - - Object pool for packet buffers. This is used to allocate memory for all - incoming and outgoing packets, and zerocoding buffers for those packets - - - - - Creates a new instance of the ObjectPoolBase class. Initialize MUST be called - after using this constructor. - - - - - Creates a new instance of the ObjectPool Base class. - - The object pool is composed of segments, which - are allocated whenever the size of the pool is exceeded. The number of items - in a segment should be large enough that allocating a new segmeng is a rare - thing. For example, on a server that will have 10k people logged in at once, - the receive buffer object pool should have segment sizes of at least 1000 - byte arrays per segment. - - The minimun number of segments that may exist. - Perform a full GC.Collect whenever a segment is allocated, and then again after allocation to compact the heap. - The frequency which segments are checked to see if they're eligible for cleanup. - - - - Forces the segment cleanup algorithm to be run. This method is intended - primarly for use from the Unit Test libraries. - - - - - Responsible for allocate 1 instance of an object that will be stored in a segment. - - An instance of whatever objec the pool is pooling. - - - - Checks in an instance of T owned by the object pool. This method is only intended to be called - by the WrappedObject class. - - The segment from which the instance is checked out. - The instance of T to check back into the segment. - - - - Checks an instance of T from the pool. If the pool is not sufficient to - allow the checkout, a new segment is created. - - A WrappedObject around the instance of T. To check - the instance back into the segment, be sureto dispose the WrappedObject - when finished. - - - - The total number of segments created. Intended to be used by the Unit Tests. - - - - - The number of items that are in a segment. Items in a segment - are all allocated at the same time, and are hopefully close to - each other in the managed heap. - - - - - The minimum number of segments. When segments are reclaimed, - this number of segments will always be left alone. These - segments are allocated at startup. - - - - - The age a segment must be before it's eligible for cleanup. - This is used to prevent thrash, and typical values are in - the 5 minute range. - - - - - The frequence which the cleanup thread runs. This is typically - expected to be in the 5 minute range. - - - - - Initialize the object pool in client mode - - Server to connect to - - - - - - Initialize the object pool in server mode - - - - - - - Returns a packet buffer with EndPoint set if the buffer is in - client mode, or with EndPoint set to null in server mode - - Initialized UDPPacketBuffer object - - - - Default constructor - - - - - Check a packet buffer out of the pool - - A packet buffer object - - - - Static pre-defined animations available to all agents - - - - Agent with afraid expression on face - - - Agent aiming a bazooka (right handed) - - - Agent aiming a bow (left handed) - - - Agent aiming a hand gun (right handed) - - - Agent aiming a rifle (right handed) - - - Agent with angry expression on face - - - Agent hunched over (away) - - - Agent doing a backflip - - - Agent laughing while holding belly - - - Agent blowing a kiss - - - Agent with bored expression on face - - - Agent bowing to audience - - - Agent brushing himself/herself off - - - Agent in busy mode - - - Agent clapping hands - - - Agent doing a curtsey bow - - - Agent crouching - - - Agent crouching while walking - - - Agent crying - - - Agent unanimated with arms out (e.g. setting appearance) - - - Agent re-animated after set appearance finished - - - Agent dancing - - - Agent dancing - - - Agent dancing - - - Agent dancing - - - Agent dancing - - - Agent dancing - - - Agent dancing - - - Agent dancing - - - Agent on ground unanimated - - - Agent boozing it up - - - Agent with embarassed expression on face - - - Agent with afraid expression on face - - - Agent with angry expression on face - - - Agent with bored expression on face - - - Agent crying - - - Agent showing disdain (dislike) for something - - - Agent with embarassed expression on face - - - Agent with frowning expression on face - - - Agent with kissy face - - - Agent expressing laughgter - - - Agent with open mouth - - - Agent with repulsed expression on face - - - Agent expressing sadness - - - Agent shrugging shoulders - - - Agent with a smile - - - Agent expressing surprise - - - Agent sticking tongue out - - - Agent with big toothy smile - - - Agent winking - - - Agent expressing worry - - - Agent falling down - - - Agent walking (feminine version) - - - Agent wagging finger (disapproval) - - - I'm not sure I want to know - - - Agent in superman position - - - Agent in superman position - - - Agent greeting another - - - Agent holding bazooka (right handed) - - - Agent holding a bow (left handed) - - - Agent holding a handgun (right handed) - - - Agent holding a rifle (right handed) - - - Agent throwing an object (right handed) - - - Agent in static hover - - - Agent hovering downward - - - Agent hovering upward - - - Agent being impatient - - - Agent jumping - - - Agent jumping with fervor - - - Agent point to lips then rear end - - - Agent landing from jump, finished flight, etc - - - Agent laughing - - - Agent landing from jump, finished flight, etc - - - Agent sitting on a motorcycle - - - - - - Agent moving head side to side - - - Agent moving head side to side with unhappy expression - - - Agent taunting another - - - - - - Agent giving peace sign - - - Agent pointing at self - - - Agent pointing at another - - - Agent preparing for jump (bending knees) - - - Agent punching with left hand - - - Agent punching with right hand - - - Agent acting repulsed - - - Agent trying to be Chuck Norris - - - Rocks, Paper, Scissors 1, 2, 3 - - - Agent with hand flat over other hand - - - Agent with fist over other hand - - - Agent with two fingers spread over other hand - - - Agent running - - - Agent appearing sad - - - Agent saluting - - - Agent shooting bow (left handed) - - - Agent cupping mouth as if shouting - - - Agent shrugging shoulders - - - Agent in sit position - - - Agent in sit position (feminine) - - - Agent in sit position (generic) - - - Agent sitting on ground - - - Agent sitting on ground - - - - - - Agent sleeping on side - - - Agent smoking - - - Agent inhaling smoke - - - - - - Agent taking a picture - - - Agent standing - - - Agent standing up - - - Agent standing - - - Agent standing - - - Agent standing - - - Agent standing - - - Agent stretching - - - Agent in stride (fast walk) - - - Agent surfing - - - Agent acting surprised - - - Agent striking with a sword - - - Agent talking (lips moving) - - - Agent throwing a tantrum - - - Agent throwing an object (right handed) - - - Agent trying on a shirt - - - Agent turning to the left - - - Agent turning to the right - - - Agent typing - - - Agent walking - - - Agent whispering - - - Agent whispering with fingers in mouth - - - Agent winking - - - Agent winking - - - Agent worried - - - Agent nodding yes - - - Agent nodding yes with happy face - - - Agent floating with legs and arms crossed - - - - Represents an that can be worn on an avatar - such as a Shirt, Pants, etc. - - - - Initializes a new instance of an AssetScriptBinary object - - - Initializes a new instance of an AssetScriptBinary object with parameters - A unique specific to this asset - A byte array containing the raw asset data - - - Initializes a new instance of an AssetScriptBinary object with parameters - A string containing the Clothings data - - - Override the base classes AssetType - - - - Temporary code to produce a tar archive in tar v7 format - - - - - Binary writer for the underlying stream - - - - - Write a directory entry to the tar archive. We can only handle one path level right now! - - - - - - Write a file to the tar archive - - - - - - - Write a file to the tar archive - - - - - - - Finish writing the raw tar archive data to a stream. The stream will be closed on completion. - - - - - Write a particular entry - - - - - - - - Temporary code to do the bare minimum required to read a tar archive for our purposes - - - - - Binary reader for the underlying stream - - - - - Used to trim off null chars - - - - - Used to trim off space chars - - - - - Generate a tar reader which reads from the given stream. - - - - - - Read the next entry in the tar file. - - - - the data for the entry. Returns null if there are no more entries - - - - Read the next 512 byte chunk of data as a tar header. - - A tar header struct. null if we have reached the end of the archive. - - - - Read data following a header - - - - - - - Convert octal bytes to a decimal representation - - - - - - - - Sort by name - - - Sort by date - - - Sort folders by name, regardless of whether items are - sorted by name or date - - - Place system folders at the top - - - - Possible destinations for DeRezObject request - - - - - - - Copy from in-world to agent inventory - - - Derez to TaskInventory - - - - - - Take Object - - - - - - Delete Object - - - Put an avatar attachment into agent inventory - - - - - - Return an object back to the owner's inventory - - - Return a deeded object back to the last owner's inventory - - - - Upper half of the Flags field for inventory items - - - - Indicates that the NextOwner permission will be set to the - most restrictive set of permissions found in the object set - (including linkset items and object inventory items) on next rez - - - Indicates that the object sale information has been - changed - - - If set, and a slam bit is set, indicates BaseMask will be overwritten on Rez - - - If set, and a slam bit is set, indicates OwnerMask will be overwritten on Rez - - - If set, and a slam bit is set, indicates GroupMask will be overwritten on Rez - - - If set, and a slam bit is set, indicates EveryoneMask will be overwritten on Rez - - - If set, and a slam bit is set, indicates NextOwnerMask will be overwritten on Rez - - - Indicates whether this object is composed of multiple - items or not - - - Indicates that the asset is only referenced by this - inventory item. If this item is deleted or updated to reference a - new assetID, the asset can be deleted - - - - Base Class for Inventory Items - - - - of item/folder - - - of parent folder - - - Name of item/folder - - - Item/Folder Owners - - - - Constructor, takes an itemID as a parameter - - The of the item - - - - - - - - - - - - - - - - Generates a number corresponding to the value of the object to support the use of a hash table, - suitable for use in hashing algorithms and data structures such as a hash table - - A Hashcode of all the combined InventoryBase fields - - - - Determine whether the specified object is equal to the current object - - InventoryBase object to compare against - true if objects are the same - - - - Determine whether the specified object is equal to the current object - - InventoryBase object to compare against - true if objects are the same - - - - An Item in Inventory - - - - The of this item - - - The combined of this item - - - The type of item from - - - The type of item from the enum - - - The of the creator of this item - - - A Description of this item - - - The s this item is set to or owned by - - - If true, item is owned by a group - - - The price this item can be purchased for - - - The type of sale from the enum - - - Combined flags from - - - Time and date this inventory item was created, stored as - UTC (Coordinated Universal Time) - - - Used to update the AssetID in requests sent to the server - - - The of the previous owner of the item - - - - Construct a new InventoryItem object - - The of the item - - - - Construct a new InventoryItem object of a specific Type - - The type of item from - of the item - - - - - - - - - - - - - - - - Generates a number corresponding to the value of the object to support the use of a hash table. - Suitable for use in hashing algorithms and data structures such as a hash table - - A Hashcode of all the combined InventoryItem fields - - - - Compares an object - - The object to compare - true if comparison object matches - - - - Determine whether the specified object is equal to the current object - - The object to compare against - true if objects are the same - - - - Determine whether the specified object is equal to the current object - - The object to compare against - true if objects are the same - - - - InventoryTexture Class representing a graphical image - - - - - - Construct an InventoryTexture object - - A which becomes the - objects AssetUUID - - - - Construct an InventoryTexture object from a serialization stream - - - - - InventorySound Class representing a playable sound - - - - - Construct an InventorySound object - - A which becomes the - objects AssetUUID - - - - Construct an InventorySound object from a serialization stream - - - - - InventoryCallingCard Class, contains information on another avatar - - - - - Construct an InventoryCallingCard object - - A which becomes the - objects AssetUUID - - - - Construct an InventoryCallingCard object from a serialization stream - - - - - InventoryLandmark Class, contains details on a specific location - - - - - Construct an InventoryLandmark object - - A which becomes the - objects AssetUUID - - - - Construct an InventoryLandmark object from a serialization stream - - - - - Landmarks use the InventoryItemFlags struct and will have a flag of 1 set if they have been visited - - - - - InventoryObject Class contains details on a primitive or coalesced set of primitives - - - - - Construct an InventoryObject object - - A which becomes the - objects AssetUUID - - - - Construct an InventoryObject object from a serialization stream - - - - - Gets or sets the upper byte of the Flags value - - - - - Gets or sets the object attachment point, the lower byte of the Flags value - - - - - InventoryNotecard Class, contains details on an encoded text document - - - - - Construct an InventoryNotecard object - - A which becomes the - objects AssetUUID - - - - Construct an InventoryNotecard object from a serialization stream - - - - - InventoryCategory Class - - TODO: Is this even used for anything? - - - - Construct an InventoryCategory object - - A which becomes the - objects AssetUUID - - - - Construct an InventoryCategory object from a serialization stream - - - - - InventoryLSL Class, represents a Linden Scripting Language object - - - - - Construct an InventoryLSL object - - A which becomes the - objects AssetUUID - - - - Construct an InventoryLSL object from a serialization stream - - - - - InventorySnapshot Class, an image taken with the viewer - - - - - Construct an InventorySnapshot object - - A which becomes the - objects AssetUUID - - - - Construct an InventorySnapshot object from a serialization stream - - - - - InventoryAttachment Class, contains details on an attachable object - - - - - Construct an InventoryAttachment object - - A which becomes the - objects AssetUUID - - - - Construct an InventoryAttachment object from a serialization stream - - - - - Get the last AttachmentPoint this object was attached to - - - - - InventoryWearable Class, details on a clothing item or body part - - - - - Construct an InventoryWearable object - - A which becomes the - objects AssetUUID - - - - Construct an InventoryWearable object from a serialization stream - - - - - The , Skin, Shape, Skirt, Etc - - - - - InventoryAnimation Class, A bvh encoded object which animates an avatar - - - - - Construct an InventoryAnimation object - - A which becomes the - objects AssetUUID - - - - Construct an InventoryAnimation object from a serialization stream - - - - - InventoryGesture Class, details on a series of animations, sounds, and actions - - - - - Construct an InventoryGesture object - - A which becomes the - objects AssetUUID - - - - Construct an InventoryGesture object from a serialization stream - - - - - A folder contains s and has certain attributes specific - to itself - - - - The Preferred for a folder. - - - The Version of this folder - - - Number of child items this folder contains. - - - - Constructor - - UUID of the folder - - - - - - - - - - Get Serilization data for this InventoryFolder object - - - - - Construct an InventoryFolder object from a serialization stream - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Tools for dealing with agents inventory - - - - Used for converting shadow_id to asset_id - - - Partial mapping of AssetTypes to folder names - - - - Default constructor - - Reference to the GridClient object - - - - Fetch an inventory item from the dataserver - - The items - The item Owners - a integer representing the number of milliseconds to wait for results - An object on success, or null if no item was found - Items will also be sent to the event - - - - Request A single inventory item - - The items - The item Owners - - - - - Request inventory items - - Inventory items to request - Owners of the inventory items - - - - - Get contents of a folder - - The of the folder to search - The of the folders owner - true to retrieve folders - true to retrieve items - sort order to return results in - a integer representing the number of milliseconds to wait for results - A list of inventory items matching search criteria within folder - - InventoryFolder.DescendentCount will only be accurate if both folders and items are - requested - - - - Request the contents of an inventory folder - - The folder to search - The folder owners - true to return s contained in folder - true to return s containd in folder - the sort order to return items in - - - - - Returns the UUID of the folder (category) that defaults to - containing 'type'. The folder is not necessarily only for that - type - - This will return the root folder if one does not exist - - The UUID of the desired folder if found, the UUID of the RootFolder - if not found, or UUID.Zero on failure - - - - Find an object in inventory using a specific path to search - - The folder to begin the search in - The object owners - A string path to search - milliseconds to wait for a reply - Found items or if - timeout occurs or item is not found - - - - Find inventory items by path - - The folder to begin the search in - The object owners - A string path to search, folders/objects separated by a '/' - Results are sent to the event - - - - Search inventory Store object for an item or folder - - The folder to begin the search in - An array which creates a path to search - Number of levels below baseFolder to conduct searches - if True, will stop searching after first match is found - A list of inventory items found - - - - Move an inventory item or folder to a new location - - The item or folder to move - The to move item or folder to - - - - Move an inventory item or folder to a new location and change its name - - The item or folder to move - The to move item or folder to - The name to change the item or folder to - - - - Move and rename a folder - - The source folders - The destination folders - The name to change the folder to - - - - Move a folder - - The source folders - The destination folders - - - - Move multiple folders, the keys in the Dictionary parameter, - to a new parents, the value of that folder's key. - - A Dictionary containing the - of the source as the key, and the - of the destination as the value - - - - Move an inventory item to a new folder - - The of the source item to move - The of the destination folder - - - - Move and rename an inventory item - - The of the source item to move - The of the destination folder - The name to change the folder to - - - - Move multiple inventory items to new locations - - A Dictionary containing the - of the source item as the key, and the - of the destination folder as the value - - - - Remove descendants of a folder - - The of the folder - - - - Remove a single item from inventory - - The of the inventory item to remove - - - - Remove a folder from inventory - - The of the folder to remove - - - - Remove multiple items or folders from inventory - - A List containing the s of items to remove - A List containing the s of the folders to remove - - - - Empty the Lost and Found folder - - - - - Empty the Trash folder - - - - - - - - - - - Proper use is to upload the inventory's asset first, then provide the Asset's TransactionID here. - - - - - - - - - - - - - Proper use is to upload the inventory's asset first, then provide the Asset's TransactionID here. - - - - - - - - Creates a new inventory folder - - ID of the folder to put this folder in - Name of the folder to create - The UUID of the newly created folder - - - - Creates a new inventory folder - - ID of the folder to put this folder in - Name of the folder to create - Sets this folder as the default folder - for new assets of the specified type. Use AssetType.Unknown - to create a normal folder, otherwise it will likely create a - duplicate of an existing folder type - The UUID of the newly created folder - If you specify a preferred type of AsseType.Folder - it will create a new root folder which may likely cause all sorts - of strange problems - - - - Create an inventory item and upload asset data - - Asset data - Inventory item name - Inventory item description - Asset type - Inventory type - Put newly created inventory in this folder - Delegate that will receive feedback on success or failure - - - - Create an inventory item and upload asset data - - Asset data - Inventory item name - Inventory item description - Asset type - Inventory type - Put newly created inventory in this folder - Permission of the newly created item - (EveryoneMask, GroupMask, and NextOwnerMask of Permissions struct are supported) - Delegate that will receive feedback on success or failure - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Request a copy of an asset embedded within a notecard - - Usually UUID.Zero for copying an asset from a notecard - UUID of the notecard to request an asset from - Target folder for asset to go to in your inventory - UUID of the embedded asset - callback to run when item is copied to inventory - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Upload new gesture asset for an inventory gesture item - - Encoded gesture asset - Gesture inventory UUID - Callback whick will be called when upload is complete - - - - Update an existing script in an agents Inventory - - A byte[] array containing the encoded scripts contents - the itemID of the script - if true, sets the script content to run on the mono interpreter - - - - - Rez an object from inventory - - Simulator to place object in - Rotation of the object when rezzed - Vector of where to place object - InventoryItem object containing item details - - - - Rez an object from inventory - - Simulator to place object in - Rotation of the object when rezzed - Vector of where to place object - InventoryItem object containing item details - UUID of group to own the object - - - - Rez an object from inventory - - Simulator to place object in - Rotation of the object when rezzed - Vector of where to place object - InventoryItem object containing item details - UUID of group to own the object - User defined queryID to correlate replies - if set to true the simulator - will automatically send object detail packet(s) back to the client - - - - DeRez an object from the simulator to the agents Objects folder in the agents Inventory - - The simulator Local ID of the object - - - - DeRez an object from the simulator and return to inventory - - The simulator Local ID of the object - The type of destination from the enum - The destination inventory folders -or- - if DeRezzing object to a tasks Inventory, the Tasks - The transaction ID for this request which - can be used to correlate this request with other packets - - - - Rez an item from inventory to its previous simulator location - - - - - - - - - Give an inventory item to another avatar - - The of the item to give - The name of the item - The type of the item from the enum - The of the recipient - true to generate a beameffect during transfer - - - - Give an inventory Folder with contents to another avatar - - The of the Folder to give - The name of the folder - The type of the item from the enum - The of the recipient - true to generate a beameffect during transfer - - - - - - - - - - - - Get the inventory of a Task (Primitive) - - The tasks - The tasks simulator local ID - milliseconds to wait for reply from simulator - A List containing the inventory items inside the task - - - - - - - - - - Request the contents of a tasks (primitives) inventory - - The simulator Local ID of the object - A reference to the simulator object that contains the object - - - - Moves an Item from an objects (Prim) Inventory to the specified folder in the avatars inventory - - LocalID of the object in the simulator - UUID of the task item to move - UUID of the folder to move the item to - Simulator Object - - - - Remove an item from an objects (Prim) Inventory - - LocalID of the object in the simulator - UUID of the task item to remove - Simulator Object - - - - Copy an InventoryScript item from the Agents Inventory into a primitives task inventory - - An unsigned integer representing a primitive being simulated - An which represents a script object from the agents inventory - true to set the scripts running state to enabled - A Unique Transaction ID - - - uint Prim = 95899503; // Fake prim ID - UUID Script = UUID.Parse("92a7fe8a-e949-dd39-a8d8-1681d8673232"); // Fake Script UUID in Inventory - - Client.Inventory.FolderContents(Client.Inventory.FindFolderForType(AssetType.LSLText), Client.Self.AgentID, - false, true, InventorySortOrder.ByName, 10000); - - UUID Transaction = Client.Inventory.RezScript(Prim, (InventoryItem)Client.Inventory.Store[Script]); - - - - - - Send a request to the simulator to get the running status of a script. The reply will come back via the EventQueue - in a ScriptRunningReply message - - The object containing the script - The script contained in the task inventorys - - - - Sets a script running state which is in a task inventory - - The object containing the script - The script contained in the task inventorys - true to set the script running, false to stop a running script - - - - Create a CRC from an InventoryItem - - The source InventoryItem - A uint representing the source InventoryItem as a CRC - - - - Reverses a cheesy XORing with a fixed UUID to convert a shadow_id to an asset_id - - Obfuscated shadow_id value - Deobfuscated asset_id value - - - - Wrapper for creating a new object - - The type of item from the enum - The of the newly created object - An object with the type and id passed - - - - Parse the results of a RequestTaskInventory() response - - A string which contains the data from the task reply - A List containing the items contained within the tasks inventory - - - - UpdateCreateInventoryItem packets are received when a new inventory item - is created. This may occur when an object that's rezzed in world is - taken into inventory, when an item is created using the CreateInventoryItem - packet, or when an object is purchased - - - - - - - - - - - - - Fired when a reply to a RequestFetchInventory() is received - - - - - - Fired when a response to a RequestFolderContents() is received - - - - - - Fired when an object or another avatar offers us an inventory item - - - - - Fired when a response to FindObjectByPath() is received - - - - - - Fired when a task inventory item is received - - This may occur when an object that's rezzed in world is - taken into inventory, when an item is created using the CreateInventoryItem - packet, or when an object is purchased - - - - - Fired in response to a request for a tasks (primitive) inventory - - - - - - - Fired when a SaveAssetToInventory packet is received, generally after the logout reply handler - - - - - Fired in response to a GetScriptRunning request - - - - - Get this agents Inventory data - - - - - Callback for inventory item creation finishing - - Whether the request to create an inventory - item succeeded or not - Inventory item being created. If success is - false this will be null - - - - Callback for an inventory item being create from an uploaded asset - - true if inventory item creation was successful - - - - - - - - - - - - - - - - - - - Callback for an inventory folder updating - - UUID of the folder that was updated - - - - Callback for when an inventory item is offered to us by another avatar or an object - - A object containing specific - details on the item being offered, eg who its from - The AssetType being offered - Will be null if item is offered from an object - will be true of item is offered from an object - Return true to accept the offer, or false to decline it - - - - Callback when an inventory object is accepted and received from a - task inventory. This is the callback in which you actually get - the ItemID, as in ObjectOfferedCallback it is null when received - from a task. - - - - - - - - - - - - - - - - - Reply received after calling RequestTaskInventory, - contains a filename that can be used in an asset download request - - UUID of the inventory item - Version number of the task inventory asset - Filename of the task inventory asset - - - - Reply received when uploading an inventory asset - - Has upload been successful - Error message if upload failed - Inventory asset UUID - New asset UUID - - - - Fired when local inventory store needs to be updated. Generally at logout to update a local cache - - the assets UUID - The new AssetID of the item, or UUID.Zero - - - - - - - - - - - - - - - - - - - - - - Level of Detail mesh - - - - - The type of bump-mapping applied to a face - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - The level of shininess applied to a face - - - - - - - - - - - - - - - - - The texture mapping style used for a face - - - - - - - - - - - Flags in the TextureEntry block that describe which properties are - set - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Represents a Landmark with RegionID and Position vector - - - - UUID of the Landmark target region - - - Local position of the target - - - Construct an Asset of type Landmark - - - - Construct an Asset object of type Landmark - - A unique specific to this asset - A byte array containing the raw asset data - - - - Constuct an asset of type Landmark - - UUID of the target region - Local position of landmark - - - - Encode the raw contents of a string with the specific Landmark format - - - - - Decode the raw asset data, populating the RegionID and Position - - true if the AssetData was successfully decoded to a UUID and Vector - - - Override the base classes AssetType - - - - This exception is thrown whenever a network operation is attempted - without a network connection. - - - - - NetworkManager is responsible for managing the network layer of - OpenMetaverse. It tracks all the server connections, serializes - outgoing traffic and deserializes incoming traffic, and provides - instances of delegates for network-related events. - - - Login Routines - - - - All of the simulators we are currently connected to - - - Handlers for incoming capability events - - - Handlers for incoming packets - - - Incoming packets that are awaiting handling - - - Outgoing packets that are awaiting handling - - - - Default constructor - - Reference to the GridClient object - - - - Register an event handler for a packet. This is a low level event - interface and should only be used if you are doing something not - supported in the library - - Packet type to trigger events for - Callback to fire when a packet of this type - is received - - - - Unregister an event handler for a packet. This is a low level event - interface and should only be used if you are doing something not - supported in the library - - Packet type this callback is registered with - Callback to stop firing events for - - - - Register a CAPS event handler. This is a low level event interface - and should only be used if you are doing something not supported in - the library - - Name of the CAPS event to register a handler for - Callback to fire when a CAPS event is received - - - - Unregister a CAPS event handler. This is a low level event interface - and should only be used if you are doing something not supported in - the library - - Name of the CAPS event this callback is - registered with - Callback to stop firing events for - - - - Send a packet to the simulator the avatar is currently occupying - - Packet to send - - - - Send a packet to a specified simulator - - Packet to send - Simulator to send the packet to - - - - Connect to a simulator - - IP address to connect to - Port to connect to - Handle for this simulator, to identify its - location in the grid - Whether to set CurrentSim to this new - connection, use this if the avatar is moving in to this simulator - URL of the capabilities server to use for - this sim connection - A Simulator object on success, otherwise null - - - - Connect to a simulator - - IP address and port to connect to - Handle for this simulator, to identify its - location in the grid - Whether to set CurrentSim to this new - connection, use this if the avatar is moving in to this simulator - URL of the capabilities server to use for - this sim connection - A Simulator object on success, otherwise null - - - - Initiate a blocking logout request. This will return when the logout - handshake has completed or when Settings.LOGOUT_TIMEOUT - has expired and the network layer is manually shut down - - - - - Initiate the logout process. Check if logout succeeded with the - OnLogoutReply event, and if this does not fire the - Shutdown() function needs to be manually called - - - - - - - - - - - - Shutdown will disconnect all the sims except for the current sim - first, and then kill the connection to CurrentSim. This should only - be called if the logout process times out on RequestLogout - - - - - Searches through the list of currently connected simulators to find - one attached to the given IPEndPoint - - IPEndPoint of the Simulator to search for - A Simulator reference on success, otherwise null - - - - Fire an event when an event queue connects for capabilities - - Simulator the event queue is attached to - - - - Called to deal with LogoutReply packet and fires off callback - - Full packet of type LogoutReplyPacket - - - - Seed CAPS URL returned from the login server - - - A list of packets obtained during the login process which networkmanager will log but not process - - - - Generate sane default values for a login request - - Account first name - Account last name - Account password - Client application name - Client application version - A populated struct containing - sane defaults - - - - Simplified login that takes the most common and required fields - - Account first name - Account last name - Account password - Client application name - Client application version - Whether the login was successful or not. On failure the - LoginErrorKey string will contain the error code and LoginMessage - will contain a description of the error - - - - Simplified login that takes the most common fields along with a - starting location URI, and can accept an MD5 string instead of a - plaintext password - - Account first name - Account last name - Account password or MD5 hash of the password - such as $1$1682a1e45e9f957dcdf0bb56eb43319c - Client application name - Starting location URI that can be built with - StartLocation() - Client application version - Whether the login was successful or not. On failure the - LoginErrorKey string will contain the error code and LoginMessage - will contain a description of the error - - - - Login that takes a struct of all the values that will be passed to - the login server - - The values that will be passed to the login - server, all fields must be set even if they are String.Empty - Whether the login was successful or not. On failure the - LoginErrorKey string will contain the error code and LoginMessage - will contain a description of the error - - - - Build a start location URI for passing to the Login function - - Name of the simulator to start in - X coordinate to start at - Y coordinate to start at - Z coordinate to start at - String with a URI that can be used to login to a specified - location - - - - Handles response from XML-RPC login replies - - - - - Handle response from LLSD login replies - - - - - - - - Get current OS - - Either "Win" or "Linux" - - - - Get clients default Mac Address - - A string containing the first found Mac Address - - - - Event raised when an outgoing packet is sent to a simulator - - - - - Event raised when the client was able to connected successfully. - - Uses the ConnectedCallback delegate. - - - - - Event raised when a before a connection to a simulator is - initialized - - - - - Event raised when a connection to a simulator is established - - - - - An event for the connection to a simulator other than the currently - occupied one disconnecting - - The Simulators list is locked when this event is - triggered, do not attempt to modify the collection or acquire a - lock on it when this callback is fired - - - - An event for being logged out either through client request, server - forced, or network error - - - - - An event for when CurrentSim changes - - - - - Triggered when an event queue makes the initial connection - - - - Unique identifier associated with our connections to - simulators - - - The simulator that the logged in avatar is currently - occupying - - - Shows whether the network layer is logged in to the - grid or not - - - Number of packets in the incoming queue - - - Number of packets in the outgoing queue - - - Called any time the login status changes, will eventually - return LoginStatus.Success or LoginStatus.Failure - - - Called when a reply is received from the login server, the - login sequence will block until this event returns - - - Current state of logging in - - - Upon login failure, contains a short string key for the - type of login error that occurred - - - The raw XML-RPC reply from the login server, exactly as it - was received (minus the HTTP header) - - - During login this contains a descriptive version of - LoginStatusCode. After a successful login this will contain the - message of the day, and after a failed login a descriptive error - message will be returned - - - - Explains why a simulator or the grid disconnected from us - - - - The client requested the logout or simulator disconnect - - - The server notified us that it is disconnecting - - - Either a socket was closed or network traffic timed out - - - The last active simulator shut down - - - - Holds a simulator reference and a decoded packet, these structs are put in - the packet inbox for event handling - - - - Reference to the simulator that this packet came from - - - Packet that needs to be processed - - - - Holds a simulator reference and a serialized packet, these structs are put in - the packet outbox for sending - - - - Reference to the simulator this packet is destined for - - - Packet that needs to be sent - - - Sequence number of the wrapped packet - - - Number of times this packet has been resent - - - Environment.TickCount when this packet was last sent over the wire - - - - Coupled with RegisterCallback(), this is triggered whenever a packet - of a registered type is received - - - - - - - Triggered whenever an outgoing packet is sent - - Buffer holding the outgoing packet payload - Number of bytes of the data buffer that were sent - Simulator this packet was sent to - - - - Assigned by the OnConnected event. Raised when login was a success - - Reference to the GridClient object that called the event - - - - Assigned by the OnLogoutReply callback. Raised upone receipt of a LogoutReply packet during logout process. - - - - - - Triggered before a new connection to a simulator is established - - The connection to the new simulator won't be established - until this callback returns - The simulator that is being connected to - Whether to continue connecting to the simulator or abort - the connection - - - - Triggered when a new connection to a simulator is established - - The simulator that is being connected to - - - - Triggered when a simulator other than the simulator that is currently - being occupied disconnects for whatever reason - - The simulator that disconnected, which will become a null - reference after the callback is finished - Enumeration explaining the reason for the disconnect - - - - Triggered when we are logged out of the grid due to a simulator request, - client request, network timeout, or any other cause - - Enumeration explaining the reason for the disconnect - If we were logged out by the simulator, this - is a message explaining why - - - - Triggered when CurrentSim changes - - A reference to the old value of CurrentSim - - - - Triggered when an event queue makes the initial connection - - Simulator this event queue is tied to - - - - Fired when a login request is successful or not - - - - - - - - - - - - - - - - - Permission request flags, asked when a script wants to control an Avatar - - - - Placeholder for empty values, shouldn't ever see this - - - Script wants ability to take money from you - - - Script wants to take camera controls for you - - - Script wants to remap avatars controls - - - Script wants to trigger avatar animations - This function is not implemented on the grid - - - Script wants to attach or detach the prim or primset to your avatar - - - Script wants permission to release ownership - This function is not implemented on the grid - The concept of "public" objects does not exist anymore. - - - Script wants ability to link/delink with other prims - - - Script wants permission to change joints - This function is not implemented on the grid - - - Script wants permissions to change permissions - This function is not implemented on the grid - - - Script wants to track avatars camera position and rotation - - - Script wants to control your camera - - - - Special commands used in Instant Messages - - - - Indicates a regular IM from another agent - - - Simple notification box with an OK button - - - You've been invited to join a group. - - - Inventory offer - - - Accepted inventory offer - - - Declined inventory offer - - - Group vote - - - An object is offering its inventory - - - Accept an inventory offer from an object - - - Decline an inventory offer from an object - - - Unknown - - - Start a session, or add users to a session - - - Start a session, but don't prune offline users - - - Start a session with your group - - - Start a session without a calling card (finder or objects) - - - Send a message to a session - - - Leave a session - - - Indicates that the IM is from an object - - - Sent an IM to a busy user, this is the auto response - - - Shows the message in the console and chat history - - - Send a teleport lure - - - Response sent to the agent which inititiated a teleport invitation - - - Response sent to the agent which inititiated a teleport invitation - - - Only useful if you have Linden permissions - - - A placeholder type for future expansion, currently not - used - - - IM to tell the user to go to an URL - - - IM for help - - - IM sent automatically on call for help, sends a lure - to each Helper reached - - - Like an IM but won't go to email - - - IM from a group officer to all group members - - - Unknown - - - Unknown - - - Accept a group invitation - - - Decline a group invitation - - - Unknown - - - An avatar is offering you friendship - - - An avatar has accepted your friendship offer - - - An avatar has declined your friendship offer - - - Indicates that a user has started typing - - - Indicates that a user has stopped typing - - - - Flag in Instant Messages, whether the IM should be delivered to - offline avatars as well - - - - Only deliver to online avatars - - - If the avatar is offline the message will be held until - they login next, and possibly forwarded to their e-mail account - - - - Conversion type to denote Chat Packet types in an easier-to-understand format - - - - Whisper (5m radius) - - - Normal chat (10/20m radius), what the official viewer typically sends - - - Shouting! (100m radius) - - - Event message when an Avatar has begun to type - - - Event message when an Avatar has stopped typing - - - Unknown - - - Event message when an object uses llOwnerSay - - - Special value to support llRegionSay, never sent to the client - - - - Identifies the source of a chat message - - - - Chat from the grid or simulator - - - Chat from another avatar - - - Chat from an object - - - - - - - - - - - - - - - - - - Effect type used in ViewerEffect packets - - - - - - - - - - - - - - - - - - - - - - - - - Project a beam from a source to a destination, such as - the one used when editing an object - - - - - - - - - - - - Create a swirl of particles around an object - - - - - - - - - Cause an avatar to look at an object - - - Cause an avatar to point at an object - - - - The action an avatar is doing when looking at something, used in - ViewerEffect packets for the LookAt effect - - - - - - - - - - - - - - - - - - - - - - Deprecated - - - - - - - - - - - - - - - - The action an avatar is doing when pointing at something, used in - ViewerEffect packets for the PointAt effect - - - - - - - - - - - - - - - - - Money transaction types - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Flags sent when a script takes or releases a control - - NOTE: (need to verify) These might be a subset of the ControlFlags enum in Movement, - - - No Flags set - - - Forward (W or up Arrow) - - - Back (S or down arrow) - - - Move left (shift+A or left arrow) - - - Move right (shift+D or right arrow) - - - Up (E or PgUp) - - - Down (C or PgDown - - - Rotate left (A or left arrow) - - - Rotate right (D or right arrow) - - - Left Mouse Button - - - Left Mouse button in MouseLook - - - - Currently only used to hide your group title - - - - No flags set - - - Hide your group title - - - - Action state of the avatar, which can currently be typing and - editing - - - - - - - - - - - - - - Current teleport status - - - - Unknown status - - - Teleport initialized - - - Teleport in progress - - - Teleport failed - - - Teleport completed - - - Teleport cancelled - - - - - - - - No flags set, or teleport failed - - - Set when newbie leaves help island for first time - - - - - - Via Lure - - - Via Landmark - - - Via Location - - - Via Home - - - Via Telehub - - - Via Login - - - Linden Summoned - - - Linden Forced me - - - - - - Agent Teleported Home via Script - - - - - - - - - - - - forced to new location for example when avatar is banned or ejected - - - Teleport Finished via a Lure - - - Finished, Sim Changed - - - Finished, Same Sim - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Instant Message - - - - Key of sender - - - Name of sender - - - Key of destination avatar - - - ID of originating estate - - - Key of originating region - - - Coordinates in originating region - - - Instant message type - - - Group IM session toggle - - - Key of IM session, for Group Messages, the groups UUID - - - Timestamp of the instant message - - - Instant message text - - - Whether this message is held for offline avatars - - - Context specific packed data - - - - Avatar group management - - - - Key of Group Member - - - Total land contribution - - - Online status information - - - Abilities that the Group Member has - - - Current group title - - - Is a group owner - - - - Role manager for a group - - - - Key of the group - - - Key of Role - - - Name of Role - - - Group Title associated with Role - - - Description of Role - - - Abilities Associated with Role - - - Returns the role's title - The role's title - - - - Class to represent Group Title - - - - Key of the group - - - ID of the role title belongs to - - - Group Title - - - Whether title is Active - - - Returns group title - - - - Represents a group on the grid - - - - Key of Group - - - Key of Group Insignia - - - Key of Group Founder - - - Key of Group Role for Owners - - - Name of Group - - - Text of Group Charter - - - Title of "everyone" role - - - Is the group open for enrolement to everyone - - - Will group show up in search - - - - - - - - - - - - Is the group Mature - - - Cost of group membership - - - - - - - - - The total number of current members this group has - - - The number of roles this group has configured - - - Show this group in agent's profile - - - Returns the name of the group - A string containing the name of the group - - - - A group Vote - - - - Key of Avatar who created Vote - - - Text of the Vote proposal - - - Total number of votes - - - - A group proposal - - - - The Text of the proposal - - - The minimum number of members that must vote before proposal passes or failes - - - The required ration of yes/no votes required for vote to pass - The three options are Simple Majority, 2/3 Majority, and Unanimous - TODO: this should be an enum - - - The duration in days votes are accepted - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Struct representing a group notice - - - - - - - - - - - - - - - - - - - - - - - Struct representing a group notice list entry - - - - Notice ID - - - Creation timestamp of notice - - - Agent name who created notice - - - Notice subject - - - Is there an attachment? - - - Attachment Type - - - - Struct representing a member of a group chat session and their settings - - - - The of the Avatar - - - True if user has voice chat enabled - - - True of Avatar has moderator abilities - - - True if a moderator has muted this avatars chat - - - True if a moderator has muted this avatars voice - - - - Role update flags - - - - - - - - - - - - - - - - - - - - - - - - - Can send invitations to groups default role - - - Can eject members from group - - - Can toggle 'Open Enrollment' and change 'Signup fee' - - - Member is visible in the public member list - - - Can create new roles - - - Can delete existing roles - - - Can change Role names, titles and descriptions - - - Can assign other members to assigners role - - - Can assign other members to any role - - - Can remove members from roles - - - Can assign and remove abilities in roles - - - Can change group Charter, Insignia, 'Publish on the web' and which - members are publicly visible in group member listings - - - Can buy land or deed land to group - - - Can abandon group owned land to Governor Linden on mainland, or Estate owner for - private estates - - - Can set land for-sale information on group owned parcels - - - Can subdivide and join parcels - - - Can join group chat sessions - - - Can use voice chat in Group Chat sessions - - - Can moderate group chat sessions - - - Can toggle "Show in Find Places" and set search category - - - Can change parcel name, description, and 'Publish on web' settings - - - Can set the landing point and teleport routing on group land - - - Can change music and media settings - - - Can toggle 'Edit Terrain' option in Land settings - - - Can toggle various About Land > Options settings - - - Can always terraform land, even if parcel settings have it turned off - - - Can always fly while over group owned land - - - Can always rez objects on group owned land - - - Can always create landmarks for group owned parcels - - - Can set home location on any group owned parcel - - - Can modify public access settings for group owned parcels - - - Can manager parcel ban lists on group owned land - - - Can manage pass list sales information - - - Can eject and freeze other avatars on group owned land - - - Can return objects set to group - - - Can return non-group owned/set objects - - - Can return group owned objects - - - Can landscape using Linden plants - - - Can deed objects to group - - - Can move group owned objects - - - Can set group owned objects for-sale - - - Pay group liabilities and receive group dividends - - - Can send group notices - - - Can receive group notices - - - Can create group proposals - - - Can vote on group proposals - - - - Handles all network traffic related to reading and writing group - information - - - - A reference to the current instance - - - Currently-active group members requests - - - Currently-active group roles requests - - - Currently-active group role-member requests - - - Dictionary keeping group members while request is in progress - - - Dictionary keeping mebmer/role mapping while request is in progress - - - Dictionary keeping GroupRole information while request is in progress - - - Caches group name lookups - - - - Group Management Routines, Methods and Packet Handlers - - A reference to the current instance - - - - Request a current list of groups the avatar is a member of. - - CAPS Event Queue must be running for this to work since the results - come across CAPS. - - - - Lookup name of group based on groupID - - groupID of group to lookup name for. - - - - Request lookup of multiple group names - - List of group IDs to request. - - - Lookup group profile data such as name, enrollment, founder, logo, etc - Subscribe to OnGroupProfile event to receive the results. - group ID (UUID) - - - Request a list of group members. - Subscribe to OnGroupMembers event to receive the results. - group ID (UUID) - UUID of the request, use to index into cache - - - Request group roles - Subscribe to OnGroupRoles event to receive the results. - group ID (UUID) - UUID of the request, use to index into cache - - - Request members (members,role) role mapping for a group. - Subscribe to OnGroupRolesMembers event to receive the results. - group ID (UUID) - UUID of the request, use to index into cache - - - Request a groups Titles - Subscribe to OnGroupTitles event to receive the results. - group ID (UUID) - UUID of the request, use to index into cache - - - Begin to get the group account summary - Subscribe to the OnGroupAccountSummary event to receive the results. - group ID (UUID) - How long of an interval - Which interval (0 for current, 1 for last) - - - Invites a user to a group - The group to invite to - A list of roles to invite a person to - Key of person to invite - - - Set a group as the current active group - group ID (UUID) - - - Change the role that determines your active title - Group ID to use - Role ID to change to - - - Set this avatar's tier contribution - Group ID to change tier in - amount of tier to donate - - - - Save wheather agent wants to accept group notices and list this group in their profile - - Group - Accept notices from this group - List this group in the profile - - - Request to join a group - Subscribe to OnGroupJoined event for confirmation. - group ID (UUID) to join. - - - - Request to create a new group. If the group is successfully - created, L$100 will automatically be deducted - - Subscribe to OnGroupCreated event to receive confirmation. - Group struct containing the new group info - - - Update a group's profile and other information - Groups ID (UUID) to update. - Group struct to update. - - - Eject a user from a group - Group ID to eject the user from - Avatar's key to eject - - - Update role information - Modified role to be updated - - - Create a new group role - Group ID to update - Role to create - - - Remove an avatar from a role - Group ID to update - Role ID to be removed from - Avatar's Key to remove - - - Assign an avatar to a role - Group ID to update - Role ID to assign to - Avatar's ID to assign to role - - - Request the group notices list - Group ID to fetch notices for - - - Request a group notice by key - ID of group notice - - - Send out a group notice - Group ID to update - GroupNotice structure containing notice data - - - Start a group proposal (vote) - The Group ID to send proposal to - GroupProposal structure containing the proposal - - - Request to leave a group - Subscribe to OnGroupLeft event to receive confirmation - The group to leave - - - - Packet Handler for EjectGroupMemberReply, fired when an avatar is ejected from - a group. - - The EjectGroupMemberReply packet - The simulator where the message originated - This is a silly packet, it doesn't provide you with the ejectees UUID - - - Fired when a is received, contains a list of - groups avatar is currently a member of - - - Fired when a UUIDGroupNameReply packet is receiived, - contains name of group requested - - - Fired when a GroupProfileReply packet is received, - contains group profile information for requested group. - - - Fired when a GroupMembersReply packet is received, - contains a list of group members for requested group - - - Fired when a GroupRoleDataReply packet is received, - contains details on roles for requested group - - - Fired when a is received, - Contains group member to group role mappings - - - Fired when a GroupTitlesReply packet is received, - sets the active role title for the current Agent - - - Fired when a GroupAccountSummaryReply packet is received, - Contains a summary of group financial information - - - Fired when a CreateGroupReply packet is received, indicates - the successful creation of a new group - - - Fired when a JoinGroupReply packet is received, indicates - the Avatar has successfully joined a new group either by - or by accepting a group join invitation with - - - Fired when a LeaveGroupReply packet is received, indicates - the Avatar has successfully left a group - - - - Fired when a AgentDropGroup packet is received, contains - the of the group dropped - - - Fired when a GroupMemberEjected packet is received, - indicates a member of a group has been ejected - - - Fired when the list of group notices is recievied - - - - Callback for the list of groups the avatar is currently a member of - - A dictionary containing the groups an avatar is a member of, - where the Key is the group , and the values are the groups - - - - Callback for a list of group names - - A dictionary containing the the group names requested - where the Key is the group , and the values are the names - - - - Callback for the profile of a group - - The group profile - - - - Callback for the member list of a group - - returned by RequestGroupMembers - of the group - A dictionary containing the members of a group - where key is member and value is struct - - - - Callback for retrieving group roles - - of the request returned from RequestGroupRoles - of the group - A dictionary containing role s as the key - and structs as values - - - - Callback for a pairing of roles to members - - of the request returned from RequestGroupRolesMembers - of the group - List containing role/member pairs - - - - Callback for the title list of a group - - of the request returned from RequestGroupTitles - Group - A dictionary containing the titles of a group - where the Key is the role , and the values are the title details - - - - Callback fired when group account summary information is received - - Group - The group account summary information - - - - Callback fired after an attempt to create a group - - The new groups - True of creation was successful - A string, containing a message from the simulator - - - - Callback fired when the avatar has joined a group - - The of the group joined - True if the join was successful - - - - Callback fired when the avatar leaves a group - - The of the group joined - True if the part was successful - - - - Fired when a group is dropped, likely because it did not keep the required (2) avatar - minimum - - The of the group which was dropped - - - - Fired when a member of a group is ejected, - Does not provide member information, only - group ID and whether it was successful or not - - The Group UUID the member was ejected from - true of member was successfully ejected - - - - Fired when the list of group notices is recievied - - The of the group for which the notice list entry was recievied - The Notice list entry - - - - The InternalDictionary class is used through the library for storing key/value pairs. - It is intended to be a replacement for the generic Dictionary class and should - be used in its place. It contains several methods for allowing access to the data from - outside the library that are read only and thread safe. - - - Key - Value - - - Internal dictionary that this class wraps around. Do not - modify or enumerate the contents of this dictionary without locking - on this member - - - - Initializes a new instance of the Class - with the specified key/value, has the default initial capacity. - - - - // initialize a new InternalDictionary named testDict with a string as the key and an int as the value. - public InternalDictionary<string, int> testDict = new InternalDictionary<string, int>(); - - - - - - Initializes a new instance of the Class - with the specified key/value, has its initial valies copied from the specified - - - - to copy initial values from - - - // initialize a new InternalDictionary named testAvName with a UUID as the key and an string as the value. - // populates with copied values from example KeyNameCache Dictionary. - - // create source dictionary - Dictionary<UUID, string> KeyNameCache = new Dictionary<UUID, string>(); - KeyNameCache.Add("8300f94a-7970-7810-cf2c-fc9aa6cdda24", "Jack Avatar"); - KeyNameCache.Add("27ba1e40-13f7-0708-3e98-5819d780bd62", "Jill Avatar"); - - // Initialize new dictionary. - public InternalDictionary<UUID, string> testAvName = new InternalDictionary<UUID, string>(KeyNameCache); - - - - - - Initializes a new instance of the Class - with the specified key/value, With its initial capacity specified. - - Initial size of dictionary - - - // initialize a new InternalDictionary named testDict with a string as the key and an int as the value, - // initially allocated room for 10 entries. - public InternalDictionary<string, int> testDict = new InternalDictionary<string, int>(10); - - - - - - Try to get entry from with specified key - - Key to use for lookup - Value returned - if specified key exists, if not found - - - // find your avatar using the Simulator.ObjectsAvatars InternalDictionary: - Avatar av; - if (Client.Network.CurrentSim.ObjectsAvatars.TryGetValue(Client.Self.AgentID, out av)) - Console.WriteLine("Found Avatar {0}", av.Name); - - - - - - - Finds the specified match. - - The match. - Matched value - - - // use a delegate to find a prim in the ObjectsPrimitives InternalDictionary - // with the ID 95683496 - uint findID = 95683496; - Primitive findPrim = sim.ObjectsPrimitives.Find( - delegate(Primitive prim) { return prim.ID == findID; }); - - - - - Find All items in an - return matching items. - a containing found items. - - Find All prims within 20 meters and store them in a List - - int radius = 20; - List<Primitive> prims = Client.Network.CurrentSim.ObjectsPrimitives.FindAll( - delegate(Primitive prim) { - Vector3 pos = prim.Position; - return ((prim.ParentID == 0) && (pos != Vector3.Zero) && (Vector3.Distance(pos, location) < radius)); - } - ); - - - - - Find All items in an - return matching keys. - a containing found keys. - - Find All keys which also exist in another dictionary - - List<UUID> matches = myDict.FindAll( - delegate(UUID id) { - return myOtherDict.ContainsKey(id); - } - ); - - - - - Perform an on each entry in an - to perform - - - // Iterates over the ObjectsPrimitives InternalDictionary and prints out some information. - Client.Network.CurrentSim.ObjectsPrimitives.ForEach( - delegate(Primitive prim) - { - if (prim.Text != null) - { - Console.WriteLine("NAME={0} ID = {1} TEXT = '{2}'", - prim.PropertiesFamily.Name, prim.ID, prim.Text); - } - }); - - - - - Perform an on each key of an - to perform - - - - Perform an on each KeyValuePair of an - - to perform - - - Check if Key exists in Dictionary - Key to check for - if found, otherwise - - - Check if Value exists in Dictionary - Value to check for - if found, otherwise - - - - Adds the specified key to the dictionary, dictionary locking is not performed, - - - The key - The value - - - - Removes the specified key, dictionary locking is not performed - - The key. - if successful, otherwise - - - - Gets the number of Key/Value pairs contained in the - - - - - Indexer for the dictionary - - The key - The value - - - - Access to the Linden dataserver which allows searching for land, events, people, etc - - - - - Starts a search for land sales using the directory - - What type of land to search for. Auction, - estate, mainland, "first land", etc - A unique identifier that can identify packets associated - with this query from other queries - The OnDirLandReply event handler must be registered before - calling this function. There is no way to determine how many - results will be returned, or how many times the callback will be - fired other than you won't get more than 100 total parcels from - each query. - - - - Starts a search for land sales using the directory - - What type of land to search for. Auction, - estate, mainland, "first land", etc - Maximum price to search for - Maximum area to search for - Each request is limited to 100 parcels - being returned. To get the first 100 parcels of a request use 0, - from 100-199 use 1, 200-299 use 2, etc. - A unique identifier that can identify packets associated - with this query from other queries - The OnDirLandReply event handler must be registered before - calling this function. There is no way to determine how many - results will be returned, or how many times the callback will be - fired other than you won't get more than 100 total parcels from - each query. - - - - Starts a search for land sales using the directory - - A flags parameter that can modify the way - search results are returned, for example changing the ordering of - results or limiting based on price or area - What type of land to search for. Auction, - estate, mainland, "first land", etc - Maximum price to search for, the - DirFindFlags.LimitByPrice flag must be set - Maximum area to search for, the - DirFindFlags.LimitByArea flag must be set - Each request is limited to 100 parcels - being returned. To get the first 100 parcels of a request use 0, - from 100-199 use 100, 200-299 use 200, etc. - A unique identifier that can identify packets associated - with this query from other queries - The OnDirLandReply event handler must be registered before - calling this function. There is no way to determine how many - results will be returned, or how many times the callback will be - fired other than you won't get more than 100 total parcels from - each query. - - - - Starts a search for a Group in the directory manager - - - The text to search for - Each request is limited to 100 parcels - being returned. To get the first 100 parcels of a request use 0, - from 100-199 use 100, 200-299 use 200, etc. - A unique identifier that can identify packets associated - with this query from other queries - The OnDirLandReply event handler must be registered before - calling this function. There is no way to determine how many - results will be returned, or how many times the callback will be - fired other than you won't get more than 100 total parcels from - each query. - - - - Search "places" for Land you personally own - - - - - Searches Places for Land owned by a specific user or group - - One of the Values from the DirFindFlags struct, ie: AgentOwned, GroupOwned, etc. - LLUID of group you want to recieve land list for (You must be in group), or - LLUID.Zero for Your own land - Transaction (Query) ID which can be associated with results from your request. - - - - Search Places - - One of the Values from the DirFindFlags struct, ie: AgentOwned, GroupOwned, etc. - One of the values from the SearchCategory Struct, ie: Any, Linden, Newcomer - LLUID of group you want to recieve results for - Transaction (Query) ID which can be associated with results from your request. - Transaction (Query) ID which can be associated with results from your request. - - - - Search Places - All Options - - One of the Values from the DirFindFlags struct, ie: AgentOwned, GroupOwned, etc. - One of the values from the SearchCategory Struct, ie: Any, Linden, Newcomer - String Text to search for - String Simulator Name to search in - LLUID of group you want to recieve results for - Transaction (Query) ID which can be associated with results from your request. - Transaction (Query) ID which can be associated with results from your request. - - - - Search All Events with specifid searchText in all categories, includes Mature - - Text to search for - UUID of query to correlate results in callback. - - - - Search Events with Options to specify category and Mature events. - - Text to search for - true to include Mature events - category to search - UUID of query to correlate results in callback. - - - - Search Events - ALL options - - string text to search for e.g.: live music - Include mature events in results - "u" for now and upcoming events, -or- number of days since/until event is scheduled - For example "0" = Today, "1" = tomorrow, "2" = following day, "-1" = yesterday, etc. - Page # to show, 0 for First Page - EventCategory event is listed under. - a UUID that can be used to track queries with results. - UUID of query to correlate results in callback. - - - Requests Event Details - ID of Event returned from Places Search - - - - - - - - - - - - - - The different categories a classified ad can be placed in - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Land types to search dataserver for - - - - Do not search - - - Land which is currently up for auction - - - Parcels which are on the mainland (Linden owned) continents - - - Parcels which are on privately owned simulators - - - - A classified ad on the grid - - - - UUID for this ad, useful for looking up detailed - information about it - - - The title of this classified ad - - - Unknown - - - Creation date of the ad - - - Expiration date of the ad - - - Price that was paid for this ad - - - - A parcel retrieved from the dataserver such as results from the - "For-Sale" listings - - - - - - - - - - - - - - - - - - - - - - - An Avatar returned from the dataserver - - - - Online status of agent - - - Agents first name - - - Agents last name - - - Agents - - - - Response to a "Groups" Search - - - - - Response to a "Places" Search, e.g. My Land, Group Land, etc. - Note: This is not DirPlacesReply - - - - - Response to "Events" search - - - - - an Event returned from the dataserver - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Capabilities is the name of the bi-directional HTTP REST protocol - used to communicate non real-time transactions such as teleporting or - group messaging - - - - Reference to the simulator this system is connected to - - - - Default constructor - - - - - - - Request the URI of a named capability - - Name of the capability to request - The URI of the requested capability, or String.Empty if - the capability does not exist - - - - Process any incoming events, check to see if we have a message created for the event, - - - - - - Capabilities URI this system was initialized with - - - Whether the capabilities event queue is connected and - listening for incoming events - - - - Triggered when an event is received via the EventQueueGet - capability - - Event name - Decoded event data - The simulator that generated the event - - - - Represents an AssetScriptBinary object containing the - LSO compiled bytecode of an LSL script - - - - Initializes a new instance of an AssetScriptBinary object - - - Initializes a new instance of an AssetScriptBinary object with parameters - A unique specific to this asset - A byte array containing the raw asset data - - - - TODO: Encodes a scripts contents into a LSO Bytecode file - - - - - TODO: Decode LSO Bytecode into a string - - true - - - Override the base classes AssetType - - - - Simulator (region) properties - - - - No flags set - - - Agents can take damage and be killed - - - Landmarks can be created here - - - Home position can be set in this sim - - - Home position is reset when an agent teleports away - - - Sun does not move - - - No object, land, etc. taxes - - - Disable heightmap alterations (agents can still plant - foliage) - - - Land cannot be released, sold, or purchased - - - All content is wiped nightly - - - - - - - - - - - - No collision detection for non-agent objects - - - No scripts are ran - - - All physics processing is turned off - - - - - - - - - - - - - - - Flight is disabled (not currently enforced by the sim) - - - Allow direct (p2p) teleporting - - - Estate owner has temporarily disabled scripting - - - - - - Deny agents with no payment info on file - - - Deny agents with payment info on file - - - Deny agents who have made a monetary transaction - - - - - - - - - Region is Voice Enabled - - - - Access level for a simulator - - - - Minimum access level, no additional checks - - - Trial accounts allowed - - - PG rating - - - Mature rating - - - Simulator is offline - - - Simulator does not exist - - - - - - - - A public reference to the client that this Simulator object - is attached to - - - A Unique Cache identifier for this simulator - - - The capabilities for this simulator - - - - - - The current version of software this simulator is running - - - - - - A 64x64 grid of parcel coloring values. The values stored - in this array are of the type - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - true if your agent has Estate Manager rights on this region - - - - - - - - - - - - Statistics information for this simulator and the - connection to the simulator, calculated by the simulator itself - and the library - - - The regions Unique ID - - - The physical data center the simulator is located - Known values are: - - Dallas - Chandler - SF - - - - - The CPU Class of the simulator - Most full mainland/estate sims appear to be 5, - Homesteads and Openspace appear to be 501 - - - The number of regions sharing the same CPU as this one - "Full Sims" appear to be 1, Homesteads appear to be 4 - - - The billing product name - Known values are: - - Mainland / Full Region (Sku: 023) - Estate / Full Region (Sku: 024) - Estate / Openspace (Sku: 027) - Estate / Homestead (Sku: 029) - Mainland / Homestead (Sku: 129) (Linden Owned) - - - - - The billing product SKU - Known values are: - - 023 Mainland / Full Region - 024 Estate / Full Region - 027 Estate / Openspace - 029 Estate / Homestead - 129 Mainland / Homestead (Linden Owned) - - - - - Provides access to two thread-safe dictionaries containing - avatars and primitives found in this simulator - - - The current sequence number for packets sent to this - simulator. Must be Interlocked before modifying. Only - useful for applications manipulating sequence numbers - - - - Provides access to an internal thread-safe dictionary containing parcel - information found in this simulator - - - - - Checks simulator parcel map to make sure it has downloaded all data successfully - - true if map is full (contains no 0's) - - - Used internally to track sim disconnections - - - Event that is triggered when the simulator successfully - establishes a connection - - - Whether this sim is currently connected or not. Hooked up - to the property Connected - - - Coarse locations of avatars in this simulator - - - AvatarPositions key representing TrackAgent target - - - Sequence numbers of packets we've received - (for duplicate checking) - - - Packets we sent out that need ACKs from the simulator - - - Sequence number for pause/resume - - - - - - Reference to the GridClient object - IPEndPoint of the simulator - handle of the simulator - - - - Called when this Simulator object is being destroyed - - - - - Attempt to connect to this simulator - - Whether to move our agent in to this sim or not - True if the connection succeeded or connection status is - unknown, false if there was a failure - - - - Disconnect from this simulator - - - - - Instructs the simulator to stop sending update (and possibly other) packets - - - - - Instructs the simulator to resume sending update packets (unpause) - - - - - Sends a packet - - Packet to be sent - - - - - - - - - Returns Simulator Name as a String - - - - - - - - - - - - - - - - - - - Sends out pending acknowledgements - - - - - Resend unacknowledged packets - - - - - Provides access to an internal thread-safe multidimensional array containing a x,y grid mapped - each 64x64 parcel's LocalID. - - - - The IP address and port of the server - - - Whether there is a working connection to the simulator or - not - - - Coarse locations of avatars in this simulator - - - AvatarPositions key representing TrackAgent target - - - - Simulator Statistics - - - - Total number of packets sent by this simulator to this agent - - - Total number of packets received by this simulator to this agent - - - Total number of bytes sent by this simulator to this agent - - - Total number of bytes received by this simulator to this agent - - - Time in seconds agent has been connected to simulator - - - Total number of packets that have been resent - - - Total number of resent packets recieved - - - Total number of pings sent to this simulator by this agent - - - Total number of ping replies sent to this agent by this simulator - - - - Incoming bytes per second - - It would be nice to have this claculated on the fly, but - this is far, far easier - - - - Outgoing bytes per second - - It would be nice to have this claculated on the fly, but - this is far, far easier - - - Time last ping was sent - - - ID of last Ping sent - - - - - - - - - Current time dilation of this simulator - - - Current Frames per second of simulator - - - Current Physics frames per second of simulator - - - - - - - - - - - - - - - - - - - - - - - - - - - Total number of objects Simulator is simulating - - - Total number of Active (Scripted) objects running - - - Number of agents currently in this simulator - - - Number of agents in neighbor simulators - - - Number of Active scripts running in this simulator - - - - - - - - - - - - Number of downloads pending - - - Number of uploads pending - - - - - - - - - Number of local uploads pending - - - Unacknowledged bytes in queue - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Checks the instance back into the object pool - - - - - Returns an instance of the class that has been checked out of the Object Pool. - - - - - - - - - No report - - - Unknown report type - - - Bug report - - - Complaint report - - - Customer service report - - - - Bitflag field for ObjectUpdateCompressed data blocks, describing - which options are present for each object - - - - Unknown - - - Whether the object has a TreeSpecies - - - Whether the object has floating text ala llSetText - - - Whether the object has an active particle system - - - Whether the object has sound attached to it - - - Whether the object is attached to a root object or not - - - Whether the object has texture animation settings - - - Whether the object has an angular velocity - - - Whether the object has a name value pairs string - - - Whether the object has a Media URL set - - - - Specific Flags for MultipleObjectUpdate requests - - - - None - - - Change position of prims - - - Change rotation of prims - - - Change size of prims - - - Perform operation on link set - - - Scale prims uniformly, same as selecing ctrl+shift in the - viewer. Used in conjunction with Scale - - - - Special values in PayPriceReply. If the price is not one of these - literal value of the price should be use - - - - - Indicates that this pay option should be hidden - - - - - Indicates that this pay option should have the default value - - - - - Contains the variables sent in an object update packet for objects. - Used to track position and movement of prims and avatars - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Handles all network traffic related to prims and avatar positions and - movement. - - - - Reference to the GridClient object - - - Does periodic dead reckoning calculation to convert - velocity and acceleration to new positions for objects - - - - Instantiates a new ObjectManager class - - A reference to the client - - - - Instantiates a new ObjectManager class - - A reference to the client - If false, the ObjectManager won't - register any packet callbacks and won't decode incoming object - packets - - - - Request object information from the sim, primarily used for stale - or missing cache entries - - The simulator containing the object you're - looking for - The objects ID which is local to the simulator the object is in - - - - Request object information for multiple objects all contained in - the same sim, primarily used for stale or missing cache entries - - A reference to the object where the objects reside - An array which contains the IDs of the objects to request - - - - Attempt to purchase an original object, a copy, or the contents of - an object - - A reference to the object where the objects reside - The objects ID which is local to the simulator the object is in - Whether the original, a copy, or the object - contents are on sale. This is used for verification, if the this - sale type is not valid for the object the purchase will fail - Price of the object. This is used for - verification, if it does not match the actual price the purchase - will fail - Group ID that will be associated with the new - purchase - Inventory folder UUID where the object or objects - purchased should be placed - - - BuyObject(Client.Network.CurrentSim, 500, SaleType.Copy, - 100, UUID.Zero, Client.Self.InventoryRootFolderUUID); - - - - - - Request prices that should be displayed in pay dialog. This will triggger the simulator - to send us back a PayPriceReply which can be handled by OnPayPriceReply event - - A reference to the object where the object resides - of the object we are requesting pay price - - - - Select a single object. This will trigger the simulator to send us back - an ObjectProperties packet so we can get the full information for - this object - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - Should objects be deselected immediately after selection - - - - Select a single object. This will trigger the simulator to send us back - an ObjectProperties packet so we can get the full information for - this object - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - - - - Select multiple objects. This will trigger the simulator to send us - back ObjectProperties for each object - - A reference to the object where the objects reside - An array which contains the IDs of the objects to select - Should objects be deselected immediately after selection - - - - Select multiple objects. This will trigger the simulator to send us - back ObjectProperties for each object - - A reference to the object where the objects reside - An array which contains the IDs of the objects to select - - - - Sets and object's flags (physical, temporary, phantom, casts shadow) - - - - - - - - - - Sets an object's sale information - - - - - - - - Sets sale info for multiple objects - - - - - - - - Deselect an object - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - - - - Deselect multiple objects. - - A reference to the object where the objects reside - An array which contains the IDs of the objects to select - - - - Perform a click action on an object - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - - - - Perform a click action on an object - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - - - - - - - - - - Create, or "rez" a new prim object in a simulator - - A reference to the object to place the object in - Data describing the prim object to rez - Group ID that this prim will be set to, or UUID.Zero if you - do not want the object to be associated with a specific group - An approximation of the position at which to rez the prim - Scale vector to size this prim - Rotation quaternion to rotate this prim - Due to the way client prim rezzing is done on the server, - the requested position for an object is only close to where the prim - actually ends up. If you desire exact placement you'll need to - follow up by moving the object after it has been created. This - function will not set textures, light and flexible data, or other - extended primitive properties - - - - Create, or "rez" a new prim object in a simulator - - A reference to the object to place the object in - Data describing the prim object to rez - Group ID that this prim will be set to, or UUID.Zero if you - do not want the object to be associated with a specific group - An approximation of the position at which to rez the prim - Scale vector to size this prim - Rotation quaternion to rotate this prim - Specify the - Due to the way client prim rezzing is done on the server, - the requested position for an object is only close to where the prim - actually ends up. If you desire exact placement you'll need to - follow up by moving the object after it has been created. This - function will not set textures, light and flexible data, or other - extended primitive properties - - - - Rez a Linden tree - - A reference to the object where the object resides - The size of the tree - The rotation of the tree - The position of the tree - The Type of tree - The of the group to set the tree to, - or UUID.Zero if no group is to be set - true to use the "new" Linden trees, false to use the old - - - - Rez grass and ground cover - - A reference to the object where the object resides - The size of the grass - The rotation of the grass - The position of the grass - The type of grass from the enum - The of the group to set the tree to, - or UUID.Zero if no group is to be set - - - - Set the textures to apply to the faces of an object - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - The texture data to apply - - - - Set the textures to apply to the faces of an object - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - The texture data to apply - A media URL (not used) - - - - Set the Light data on an object - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - A object containing the data to set - - - - Set the flexible data on an object - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - A object containing the data to set - - - - Set the sculptie texture and data on an object - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - A object containing the data to set - - - - Set additional primitive parameters on an object - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - The extra parameters to set - - - - Link multiple prims into a linkset - - A reference to the object where the objects reside - An array which contains the IDs of the objects to link - The last object in the array will be the root object of the linkset TODO: Is this true? - - - - Change the rotation of an object - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - The new rotation of the object - - - - Set the name of an object - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - A string containing the new name of the object - - - - Set the name of multiple objects - - A reference to the object where the objects reside - An array which contains the IDs of the objects to change the name of - An array which contains the new names of the objects - - - - Set the description of an object - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - A string containing the new description of the object - - - - Set the descriptions of multiple objects - - A reference to the object where the objects reside - An array which contains the IDs of the objects to change the description of - An array which contains the new descriptions of the objects - - - - Attach an object to this avatar - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - The point on the avatar the object will be attached - The rotation of the attached object - - - - Drop an attached object from this avatar - - A reference to the - object where the objects reside. This will always be the simulator the avatar is currently in - - The object's ID which is local to the simulator the object is in - - - - Detach an object from yourself - - A reference to the - object where the objects reside - - This will always be the simulator the avatar is currently in - - An array which contains the IDs of the objects to detach - - - - Change the position of an object, Will change position of entire linkset - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - The new position of the object - - - - Change the position of an object - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - The new position of the object - if true, will change position of (this) child prim only, not entire linkset - - - - Change the Scale (size) of an object - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - The new scale of the object - If true, will change scale of this prim only, not entire linkset - True to resize prims uniformly - - - - Change the Rotation of an object that is either a child or a whole linkset - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - The new scale of the object - If true, will change rotation of this prim only, not entire linkset - - - - Send a Multiple Object Update packet to change the size, scale or rotation of a primitive - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - The new rotation, size, or position of the target object - The flags from the Enum - - - - Deed an object (prim) to a group, Object must be shared with group which - can be accomplished with SetPermissions() - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - The of the group to deed the object to - - - - Deed multiple objects (prims) to a group, Objects must be shared with group which - can be accomplished with SetPermissions() - - A reference to the object where the object resides - An array which contains the IDs of the objects to deed - The of the group to deed the object to - - - - Set the permissions on multiple objects - - A reference to the object where the objects reside - An array which contains the IDs of the objects to set the permissions on - The new Who mask to set - The new Permissions mark to set - TODO: What does this do? - - - - Request additional properties for an object - - A reference to the object where the object resides - - - - - Request additional properties for an object - - A reference to the object where the object resides - Absolute UUID of the object - Whether to require server acknowledgement of this request - - - - Used for new prims, or significant changes to existing prims - - - - - - - A terse object update, used when a transformation matrix or - velocity/acceleration for an object changes but nothing else - (scale/position/rotation/acceleration/velocity) - - - - - - - - - - - - - - Handles cached object update packets from the simulator - - The packet containing the object data - The simulator sending the data - - - - Handle KillObject packets from the simulator - - The packet containing the object data - The simulator sending the data - - - - Setup construction data for a basic primitive shape - - Primitive shape to construct - Construction data that can be plugged into a - - - - - - - - - - - - - - - - - - - - Set the Shape data of an object - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - Data describing the prim shape - - - - Set the Material data of an object - - A reference to the object where the object resides - The objects ID which is local to the simulator the object is in - The new material of the object - - - - - - - - - - - - - - - - - - - - - - This event will be raised for every ObjectUpdate block that - contains a prim that isn't attached to an avatar. - - Depending on the circumstances a client could - receive two or more of these events for the same object, if you - or the object left the current sim and returned for example. Client - applications are responsible for tracking and storing objects. - - - - - This event will be raised for every ObjectUpdate block that - contains an avatar attachment. - - Depending on the circumstances a client could - receive two or more of these events for the same object, if you - or the object left the current sim and returned for example. Client - applications are responsible for tracking and storing objects. - - - - - This event will be raised for every ObjectUpdate block that - contains a new avatar. - - Depending on the circumstances a client - could receive two or more of these events for the same avatar, if - you or the other avatar left the current sim and returned for - example. Client applications are responsible for tracking and - storing objects. - - - - - This event will be raised when a terse object update packet is - received, containing the updated position, rotation, and - movement-related vectors - - - - - This event will be raised when a terse object update packet is - received, containing the updated position, rotation, and - movement-related vectors - - - - - Triggers the OnObjectDataBlockUpdate event. - - - - - This event will be raised when an avatar sits on an object - or stands up, with a local ID of the current seat or zero. - - - - - This event will be raised when an object is removed from a - simulator. - - - - - This event will be raised when an objects properties are received - from the simulator - - - - - This event will be raised when an objects properties are updated - from the simulator - - - - - Thie event will be raised when an objects properties family - information is recieved from the simulator. ObjectPropertiesFamily - is a subset of the fields found in ObjectProperties - - - - - This event will be fired when we recieve pay price information - for the object after having asked for them with RequestPayPrice - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Called whenever an object terse update is received - - - - - - - - - Called whenever an object terse update is received - This is different than the above in that the update to the prim has not happened yet - - - - - - - - Called whenever an major object update is received - This is when major changes are happening to the contructionData changing the shape of an object - - - - - - - - - - - Called whenever an object disappears - - - - - - - Called whenever the client avatar sits down or stands up - - Simulator the packet was received from - - The local ID of the object that is being sat - - on. If this is zero the avatar is not sitting on an object - - - - Called when we get PayPriceReply packet after calling RequestPayPrice - - Simulator the packet was received from - Object - Default pay price for the object, -1 means control should be disabled, -2 it should be empty - Array of 4 prices, -1 means button should be disabled - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Login Request Parameters - - - - The URL of the Login Server - - - The number of milliseconds to wait before a login is considered - failed due to timeout - - - The request method - login_to_server is currently the only supported method - - - The Agents First name - - - The Agents Last name - - - A md5 hashed password - plaintext password will be automatically hashed - - - The agents starting location once logged in - Either "last", "home", or a string encoded URI - containing the simulator name and x/y/z coordinates e.g: uri:hooper&128&152&17 - - - A string containing the client software channel information - Second Life Release - - - The client software version information - The official viewer uses: Second Life Release n.n.n.n - where n is replaced with the current version of the viewer - - - A string containing the platform information the agent is running on - - - A string hash of the network cards Mac Address - - - Unknown or deprecated - - - A string hash of the first disk drives ID used to identify this clients uniqueness - - - A string containing the viewers Software, this is not directly sent to the login server but - instead is used to generate the Version string - - - A string representing the software creator. This is not directly sent to the login server but - is used by the library to generate the Version information - - - If true, this agent agrees to the Terms of Service of the grid its connecting to - - - Unknown - - - An array of string sent to the login server to enable various options - - - A randomly generated ID to distinguish between login attempts. This value is only used - internally in the library and is never sent over the wire - - - - The decoded data returned from the login server after a successful login - - - - true, false, indeterminate - - - Login message of the day - - - M or PG, also agent_region_access and agent_access_max - - - - Parse LLSD Login Reply Data - - An - contaning the login response data - XML-RPC logins do not require this as XML-RPC.NET - automatically populates the struct properly using attributes - - - - Overrides SSL certificate validation check for Mono - - Remove me when MONO can handle ServerCertificateValidationCallback - - - - - - - - - - - - - - - De-serialization constructor for the InventoryNode Class - - - - - Serialization handler for the InventoryNode Class - - - - - De-serialization handler for the InventoryNode Class - - - - - - - - - - - - - - - - - - - - - - - For inventory folder nodes specifies weather the folder needs to be - refreshed from the server - - - - - Exception class to identify inventory exceptions - - - - - Responsible for maintaining inventory structure. Inventory constructs nodes - and manages node children as is necessary to maintain a coherant hirarchy. - Other classes should not manipulate or create InventoryNodes explicitly. When - A node's parent changes (when a folder is moved, for example) simply pass - Inventory the updated InventoryFolder and it will make the appropriate changes - to its internal representation. - - - - - Returns the contents of the specified folder - - A folder's UUID - The contents of the folder corresponding to folder - When folder does not exist in the inventory - - - - Updates the state of the InventoryNode and inventory data structure that - is responsible for the InventoryObject. If the item was previously not added to inventory, - it adds the item, and updates structure accordingly. If it was, it updates the - InventoryNode, changing the parent node if item.parentUUID does - not match node.Parent.Data.UUID. - - You can not set the inventory root folder using this method - - The InventoryObject to store - - - - Removes the InventoryObject and all related node data from Inventory. - - The InventoryObject to remove. - - - - Used to find out if Inventory contains the InventoryObject - specified by uuid. - - The UUID to check. - true if inventory contains uuid, false otherwise - - - - Saves the current inventory structure to a cache file - - Name of the cache file to save to - - - - Loads in inventory cache file into the inventory structure. Note only valid to call after login has been successful. - - Name of the cache file to load - The number of inventory items sucessfully reconstructed into the inventory node tree - - - - Called when an InventoryObject's state is changed. - - - - - Called when an item or folder is removed from inventory. - - - - - Called when an item is first added to the local inventory store. - This will occur most frequently when we're initially downloading - the inventory from the server. - - This will also fire when another avatar or object offers us inventory - - - - - The root folder of this avatars inventory - - - - - The default shared library folder - - - - - The root node of the avatars inventory - - - - - The root node of the default shared library - - - - - By using the bracket operator on this class, the program can get the - InventoryObject designated by the specified uuid. If the value for the corresponding - UUID is null, the call is equivelant to a call to RemoveNodeFor(this[uuid]). - If the value is non-null, it is equivelant to a call to UpdateNodeFor(value), - the uuid parameter is ignored. - - The UUID of the InventoryObject to get or set, ignored if set to non-null value. - The InventoryObject corresponding to uuid. - - - - Delegate to use for the OnInventoryObjectUpdated event. - - The state of the InventoryObject before the update occured. - The state of the InventoryObject after the update occured. - - - - Delegate to use for the OnInventoryObjectRemoved event. - - The InventoryObject that was removed. - - - - Delegate to use for the OnInventoryObjectUpdated event. - - The InventoryObject that has been stored. - - - - Map layer request type - - - - Objects and terrain are shown - - - Only the terrain is shown, no objects - - - Overlay showing land for sale and for auction - - - - Type of grid item, such as telehub, event, populator location, etc. - - - - Telehub - - - PG rated event - - - Mature rated event - - - Popular location - - - Locations of avatar groups in a region - - - Land for sale - - - Classified ad - - - - Information about a region on the grid map - - - - Sim X position on World Map - - - Sim Y position on World Map - - - Sim Name (NOTE: In lowercase!) - - - - - - Appears to always be zero (None) - - - Sim's defined Water Height - - - - - - UUID of the World Map image - - - Unique identifier for this region, a combination of the X - and Y position - - - - - - - - - - - - - - - - - - - - - - - Visual chunk of the grid map - - - - - Manages grid-wide tasks such as the world map - - - - A dictionary of all the regions, indexed by region name - - - A dictionary of all the regions, indexed by region handle - - - - Constructor - - Instance of GridClient object to associate with this GridManager instance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Request data for all mainland (Linden managed) simulators - - - - - Request the region handle for the specified region UUID - - UUID of the region to look up - - - - Get grid region information using the region name, this function - will block until it can find the region or gives up - - Name of sim you're looking for - Layer that you are requesting - Will contain a GridRegion for the sim you're - looking for if successful, otherwise an empty structure - True if the GridRegion was successfully fetched, otherwise - false - - - - Populate Grid info based on data from MapBlockReplyPacket - - Incoming MapBlockReplyPacket packet - Unused - - - - Get sim time from the appropriate packet - - Incoming SimulatorViewerTimeMessagePacket from SL - Unused - - - Triggered when coarse locations (minimap dots) are updated by the simulator - - - Triggered when a new region is discovered through GridManager - - - - - - - - - - - - Unknown - - - Current direction of the sun - - - Current angular velocity of the sun - - - Current world time - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + OpenMetaverse + + + + + Capability to load TGAs to Bitmap + + + + + Represents a primitive asset + + + + + Base class for all Asset types + + + + A byte array containing the raw asset data + + + True if the asset it only stored on the server temporarily + + + A unique ID + + + + Construct a new Asset object + + + + + Construct a new Asset object + + A unique specific to this asset + A byte array containing the raw asset data + + + + Regenerates the AssetData byte array from the properties + of the derived class. + + + + + Decodes the AssetData, placing it in appropriate properties of the derived + class. + + True if the asset decoding succeeded, otherwise false + + + The assets unique ID + + + + The "type" of asset, Notecard, Animation, etc + + + + Initializes a new instance of an AssetPrim object + + + + + + + + + + + + + + Override the base classes AssetType + + + + Only used internally for XML serialization/deserialization + + + + + pre-defined built in sounds + + + + + + + + + + + + + + + + + + + + + + + + + + + + coins + + + cash register bell + + + + + + + + + rubber + + + plastic + + + flesh + + + wood splintering? + + + glass break + + + metal clunk + + + whoosh + + + shake + + + + + + ding + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + A dictionary containing all pre-defined sounds + + A dictionary containing the pre-defined sounds, + where the key is the sounds ID, and the value is a string + containing a name to identify the purpose of the sound + + + + Type of return to use when returning objects from a parcel + + + + + + + Return objects owned by parcel owner + + + Return objects set to group + + + Return objects not owned by parcel owner or set to group + + + Return a specific list of objects on parcel + + + Return objects that are marked for-sale + + + + Blacklist/Whitelist flags used in parcels Access List + + + + Agent is denied access + + + Agent is granted access + + + + The result of a request for parcel properties + + + + No matches were found for the request + + + Request matched a single parcel + + + Request matched multiple parcels + + + + Flags used in the ParcelAccessListRequest packet to specify whether + we want the access list (whitelist), ban list (blacklist), or both + + + + Request the access list + + + Request the ban list + + + Request both White and Black lists + + + + Sequence ID in ParcelPropertiesReply packets (sent when avatar + tries to cross a parcel border) + + + + Parcel is currently selected + + + Parcel restricted to a group the avatar is not a + member of + + + Avatar is banned from the parcel + + + Parcel is restricted to an access list that the + avatar is not on + + + Response to hovering over a parcel + + + + The tool to use when modifying terrain levels + + + + Level the terrain + + + Raise the terrain + + + Lower the terrain + + + Smooth the terrain + + + Add random noise to the terrain + + + Revert terrain to simulator default + + + + The tool size to use when changing terrain levels + + + + Small + + + Medium + + + Large + + + + Reasons agent is denied access to a parcel on the simulator + + + + Agent is not denied, access is granted + + + Agent is not a member of the group set for the parcel, or which owns the parcel + + + Agent is not on the parcels specific allow list + + + Agent is on the parcels ban list + + + Unknown + + + Agent is not age verified and parcel settings deny access to non age verified avatars + + + + Parcel overlay type. This is used primarily for highlighting and + coloring which is why it is a single integer instead of a set of + flags + + These values seem to be poorly thought out. The first three + bits represent a single value, not flags. For example Auction (0x05) is + not a combination of OwnedByOther (0x01) and ForSale(0x04). However, + the BorderWest and BorderSouth values are bit flags that get attached + to the value stored in the first three bits. Bits four, five, and six + are unused + + + Public land + + + Land is owned by another avatar + + + Land is owned by a group + + + Land is owned by the current avatar + + + Land is for sale + + + Land is being auctioned + + + To the west of this area is a parcel border + + + To the south of this area is a parcel border + + + + Various parcel properties + + + + No flags set + + + Allow avatars to fly (a client-side only restriction) + + + Allow foreign scripts to run + + + This parcel is for sale + + + Allow avatars to create a landmark on this parcel + + + Allows all avatars to edit the terrain on this parcel + + + Avatars have health and can take damage on this parcel. + If set, avatars can be killed and sent home here + + + Foreign avatars can create objects here + + + All objects on this parcel can be purchased + + + Access is restricted to a group + + + Access is restricted to a whitelist + + + Ban blacklist is enabled + + + Unknown + + + List this parcel in the search directory + + + Allow personally owned parcels to be deeded to group + + + If Deeded, owner contributes required tier to group parcel is deeded to + + + Restrict sounds originating on this parcel to the + parcel boundaries + + + Objects on this parcel are sold when the land is + purchsaed + + + Allow this parcel to be published on the web + + + The information for this parcel is mature content + + + The media URL is an HTML page + + + The media URL is a raw HTML string + + + Restrict foreign object pushes + + + Ban all non identified/transacted avatars + + + Allow group-owned scripts to run + + + Allow object creation by group members or group + objects + + + Allow all objects to enter this parcel + + + Only allow group and owner objects to enter this parcel + + + Voice Enabled on this parcel + + + Use Estate Voice channel for Voice on this parcel + + + Deny Age Unverified Users + + + + Parcel ownership status + + + + Placeholder + + + Parcel is leased (owned) by an avatar or group + + + Parcel is in process of being leased (purchased) by an avatar or group + + + Parcel has been abandoned back to Governor Linden + + + + Category parcel is listed in under search + + + + No assigned category + + + Linden Infohub or public area + + + Adult themed area + + + Arts and Culture + + + Business + + + Educational + + + Gaming + + + Hangout or Club + + + Newcomer friendly + + + Parks and Nature + + + Residential + + + Shopping + + + Not Used? + + + Other + + + Not an actual category, only used for queries + + + + Type of teleport landing for a parcel + + + + Unset, simulator default + + + Specific landing point set for this parcel + + + No landing point set, direct teleports enabled for + this parcel + + + + Parcel Media Command used in ParcelMediaCommandMessage + + + + Stop the media stream and go back to the first frame + + + Pause the media stream (stop playing but stay on current frame) + + + Start the current media stream playing and stop when the end is reached + + + Start the current media stream playing, + loop to the beginning when the end is reached and continue to play + + + Specifies the texture to replace with video + If passing the key of a texture, it must be explicitly typecast as a key, + not just passed within double quotes. + + + Specifies the movie URL (254 characters max) + + + Specifies the time index at which to begin playing + + + Specifies a single agent to apply the media command to + + + Unloads the stream. While the stop command sets the texture to the first frame of the movie, + unload resets it to the real texture that the movie was replacing. + + + Turn on/off the auto align feature, similar to the auto align checkbox in the parcel media properties + (NOT to be confused with the "align" function in the textures view of the editor!) Takes TRUE or FALSE as parameter. + + + Allows a Web page or image to be placed on a prim (1.19.1 RC0 and later only). + Use "text/html" for HTML. + + + Resizes a Web page to fit on x, y pixels (1.19.1 RC0 and later only). + This might still not be working + + + Sets a description for the media being displayed (1.19.1 RC0 and later only). + + + + Some information about a parcel of land returned from a DirectoryManager search + + + + Global Key of record + + + Parcel Owners + + + Name field of parcel, limited to 128 characters + + + Description field of parcel, limited to 256 characters + + + Total Square meters of parcel + + + Total area billable as Tier, for group owned land this will be 10% less than ActualArea + + + True of parcel is in Mature simulator + + + Grid global X position of parcel + + + Grid global Y position of parcel + + + Grid global Z position of parcel (not used) + + + Name of simulator parcel is located in + + + Texture of parcels display picture + + + Float representing calculated traffic based on time spent on parcel by avatars + + + Sale price of parcel (not used) + + + Auction ID of parcel + + + + Parcel Media Information + + + + A byte, if 0x1 viewer should auto scale media to fit object + + + A boolean, if true the viewer should loop the media + + + The Asset UUID of the Texture which when applied to a + primitive will display the media + + + A URL which points to any Quicktime supported media type + + + A description of the media + + + An Integer which represents the height of the media + + + An integer which represents the width of the media + + + A string which contains the mime type of the media + + + + Parcel of land, a portion of virtual real estate in a simulator + + + + The total number of contiguous 4x4 meter blocks your agent owns within this parcel + + + The total number of contiguous 4x4 meter blocks contained in this parcel owned by a group or agent other than your own + + + Deprecated, Value appears to always be 0 + + + Simulator-local ID of this parcel + + + UUID of the owner of this parcel + + + Whether the land is deeded to a group or not + + + + + + Date land was claimed + + + Appears to always be zero + + + This field is no longer used + + + Minimum corner of the axis-aligned bounding box for this + parcel + + + Maximum corner of the axis-aligned bounding box for this + parcel + + + Bitmap describing land layout in 4x4m squares across the + entire region + + + Total parcel land area + + + + + + Maximum primitives across the entire simulator owned by the same agent or group that owns this parcel that can be used + + + Total primitives across the entire simulator calculated by combining the allowed prim counts for each parcel + owned by the agent or group that owns this parcel + + + Maximum number of primitives this parcel supports + + + Total number of primitives on this parcel + + + For group-owned parcels this indicates the total number of prims deeded to the group, + for parcels owned by an individual this inicates the number of prims owned by the individual + + + Total number of primitives owned by the parcel group on + this parcel, or for parcels owned by an individual with a group set the + total number of prims set to that group. + + + Total number of prims owned by other avatars that are not set to group, or not the parcel owner + + + A bonus multiplier which allows parcel prim counts to go over times this amount, this does not affect + the max prims per simulator. e.g: 117 prim parcel limit x 1.5 bonus = 175 allowed + + + Autoreturn value in minutes for others' objects + + + + + + Sale price of the parcel, only useful if ForSale is set + The SalePrice will remain the same after an ownership + transfer (sale), so it can be used to see the purchase price after + a sale if the new owner has not changed it + + + Parcel Name + + + Parcel Description + + + URL For Music Stream + + + + + + Price for a temporary pass + + + How long is pass valid for + + + + + + Key of authorized buyer + + + Key of parcel snapshot + + + The landing point location + + + The landing point LookAt + + + The type of landing enforced from the enum + + + + + + + + + + + + Access list of who is whitelisted on this + parcel + + + Access list of who is blacklisted on this + parcel + + + TRUE of region denies access to age unverified users + + + true to obscure (hide) media url + + + true to obscure (hide) music url + + + A struct containing media details + + + + Displays a parcel object in string format + + string containing key=value pairs of a parcel object + + + + Defalt constructor + + Local ID of this parcel + + + + Update the simulator with any local changes to this Parcel object + + Simulator to send updates to + Whether we want the simulator to confirm + the update with a reply packet or not + + + + Set Autoreturn time + + Simulator to send the update to + + + + Parcel (subdivided simulator lots) subsystem + + + + The event subscribers. null if no subcribers + + + Raises the ParcelDwellReply event + A ParcelDwellReplyEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the ParcelInfoReply event + A ParcelInfoReplyEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the ParcelProperties event + A ParcelPropertiesEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the ParcelAccessListReply event + A ParcelAccessListReplyEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the ParcelObjectOwnersReply event + A ParcelObjectOwnersReplyEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the SimParcelsDownloaded event + A SimParcelsDownloadedEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the ForceSelectObjectsReply event + A ForceSelectObjectsReplyEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the ParcelMediaUpdateReply event + A ParcelMediaUpdateReplyEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the ParcelMediaCommand event + A ParcelMediaCommandEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + + Default constructor + + A reference to the GridClient object + + + + Request basic information for a single parcel + + Simulator-local ID of the parcel + + + + Request properties of a single parcel + + Simulator containing the parcel + Simulator-local ID of the parcel + An arbitrary integer that will be returned + with the ParcelProperties reply, useful for distinguishing between + multiple simultaneous requests + + + + Request the access list for a single parcel + + Simulator containing the parcel + Simulator-local ID of the parcel + An arbitrary integer that will be returned + with the ParcelAccessList reply, useful for distinguishing between + multiple simultaneous requests + + + + + Request properties of parcels using a bounding box selection + + Simulator containing the parcel + Northern boundary of the parcel selection + Eastern boundary of the parcel selection + Southern boundary of the parcel selection + Western boundary of the parcel selection + An arbitrary integer that will be returned + with the ParcelProperties reply, useful for distinguishing between + different types of parcel property requests + A boolean that is returned with the + ParcelProperties reply, useful for snapping focus to a single + parcel + + + + Request all simulator parcel properties (used for populating the Simulator.Parcels + dictionary) + + Simulator to request parcels from (must be connected) + + + + Request all simulator parcel properties (used for populating the Simulator.Parcels + dictionary) + + Simulator to request parcels from (must be connected) + If TRUE, will force a full refresh + Number of milliseconds to pause in between each request + + + + Request the dwell value for a parcel + + Simulator containing the parcel + Simulator-local ID of the parcel + + + + Send a request to Purchase a parcel of land + + The Simulator the parcel is located in + The parcels region specific local ID + true if this parcel is being purchased by a group + The groups + true to remove tier contribution if purchase is successful + The parcels size + The purchase price of the parcel + + + + + Reclaim a parcel of land + + The simulator the parcel is in + The parcels region specific local ID + + + + Deed a parcel to a group + + The simulator the parcel is in + The parcels region specific local ID + The groups + + + + Request prim owners of a parcel of land. + + Simulator parcel is in + The parcels region specific local ID + + + + Return objects from a parcel + + Simulator parcel is in + The parcels region specific local ID + the type of objects to return, + A list containing object owners s to return + + + + Subdivide (split) a parcel + + + + + + + + + + Join two parcels of land creating a single parcel + + + + + + + + + + Get a parcels LocalID + + Simulator parcel is in + Vector3 position in simulator (Z not used) + 0 on failure, or parcel LocalID on success. + A call to Parcels.RequestAllSimParcels is required to populate map and + dictionary. + + + + Terraform (raise, lower, etc) an area or whole parcel of land + + Simulator land area is in. + LocalID of parcel, or -1 if using bounding box + From Enum, Raise, Lower, Level, Smooth, Etc. + Size of area to modify + true on successful request sent. + Settings.STORE_LAND_PATCHES must be true, + Parcel information must be downloaded using RequestAllSimParcels() + + + + Terraform (raise, lower, etc) an area or whole parcel of land + + Simulator land area is in. + west border of area to modify + south border of area to modify + east border of area to modify + north border of area to modify + From Enum, Raise, Lower, Level, Smooth, Etc. + Size of area to modify + true on successful request sent. + Settings.STORE_LAND_PATCHES must be true, + Parcel information must be downloaded using RequestAllSimParcels() + + + + Terraform (raise, lower, etc) an area or whole parcel of land + + Simulator land area is in. + LocalID of parcel, or -1 if using bounding box + west border of area to modify + south border of area to modify + east border of area to modify + north border of area to modify + From Enum, Raise, Lower, Level, Smooth, Etc. + Size of area to modify + How many meters + or - to lower, 1 = 1 meter + true on successful request sent. + Settings.STORE_LAND_PATCHES must be true, + Parcel information must be downloaded using RequestAllSimParcels() + + + + Terraform (raise, lower, etc) an area or whole parcel of land + + Simulator land area is in. + LocalID of parcel, or -1 if using bounding box + west border of area to modify + south border of area to modify + east border of area to modify + north border of area to modify + From Enum, Raise, Lower, Level, Smooth, Etc. + Size of area to modify + How many meters + or - to lower, 1 = 1 meter + Height at which the terraform operation is acting at + + + + Sends a request to the simulator to return a list of objects owned by specific owners + + Simulator local ID of parcel + Owners, Others, Etc + List containing keys of avatars objects to select; + if List is null will return Objects of type selectType + Response data is returned in the event + + + + Eject and optionally ban a user from a parcel + + target key of avatar to eject + true to also ban target + + + + Freeze or unfreeze an avatar over your land + + target key to freeze + true to freeze, false to unfreeze + + + + Abandon a parcel of land + + Simulator parcel is in + Simulator local ID of parcel + + + + Requests the UUID of the parcel in a remote region at a specified location + + Location of the parcel in the remote region + Remote region handle + Remote region UUID + If successful UUID of the remote parcel, UUID.Zero otherwise + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + Raises the event + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + Raises the event + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + Raises the event + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + Raises the event + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + Raises the event + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + Raises the event + + + Raised when the simulator responds to a request + + + Raised when the simulator responds to a request + + + Raised when the simulator responds to a request + + + Raised when the simulator responds to a request + + + Raised when the simulator responds to a request + + + Raised when the simulator responds to a request + + + Raised when the simulator responds to a request + + + Raised when the simulator responds to a Parcel Update request + + + Raised when the parcel your agent is located sends a ParcelMediaCommand + + + + Parcel Accesslist + + + + Agents + + + + + + Flags for specific entry in white/black lists + + + + Owners of primitives on parcel + + + + Prim Owners + + + True of owner is group + + + Total count of prims owned by OwnerID + + + true of OwnerID is currently online and is not a group + + + The date of the most recent prim left by OwnerID + + + Contains a parcels dwell data returned from the simulator in response to an + + + + Construct a new instance of the ParcelDwellReplyEventArgs class + + The global ID of the parcel + The simulator specific ID of the parcel + The calculated dwell for the parcel + + + Get the global ID of the parcel + + + Get the simulator specific ID of the parcel + + + Get the calculated dwell + + + Contains basic parcel information data returned from the + simulator in response to an request + + + + Construct a new instance of the ParcelInfoReplyEventArgs class + + The object containing basic parcel info + + + Get the object containing basic parcel info + + + Contains basic parcel information data returned from the simulator in response to an request + + + + Construct a new instance of the ParcelPropertiesEventArgs class + + The object containing the details + The object containing the details + The result of the request + The number of primitieves your agent is + currently selecting and or sitting on in this parcel + The user assigned ID used to correlate a request with + these results + TODO: + + + Get the simulator the parcel is located in + + + Get the object containing the details + If Result is NoData, this object will not contain valid data + + + Get the result of the request + + + Get the number of primitieves your agent is + currently selecting and or sitting on in this parcel + + + Get the user assigned ID used to correlate a request with + these results + + + TODO: + + + Contains blacklist and whitelist data returned from the simulator in response to an request + + + + Construct a new instance of the ParcelAccessListReplyEventArgs class + + The simulator the parcel is located in + The user assigned ID used to correlate a request with + these results + The simulator specific ID of the parcel + TODO: + The list containing the white/blacklisted agents for the parcel + + + Get the simulator the parcel is located in + + + Get the user assigned ID used to correlate a request with + these results + + + Get the simulator specific ID of the parcel + + + TODO: + + + Get the list containing the white/blacklisted agents for the parcel + + + Contains blacklist and whitelist data returned from the + simulator in response to an request + + + + Construct a new instance of the ParcelObjectOwnersReplyEventArgs class + + The simulator the parcel is located in + The list containing prim ownership counts + + + Get the simulator the parcel is located in + + + Get the list containing prim ownership counts + + + Contains the data returned when all parcel data has been retrieved from a simulator + + + + Construct a new instance of the SimParcelsDownloadedEventArgs class + + The simulator the parcel data was retrieved from + The dictionary containing the parcel data + The multidimensional array containing a x,y grid mapped + to each 64x64 parcel's LocalID. + + + Get the simulator the parcel data was retrieved from + + + A dictionary containing the parcel data where the key correlates to the ParcelMap entry + + + Get the multidimensional array containing a x,y grid mapped + to each 64x64 parcel's LocalID. + + + Contains the data returned when a request + + + + Construct a new instance of the ForceSelectObjectsReplyEventArgs class + + The simulator the parcel data was retrieved from + The list of primitive IDs + true if the list is clean and contains the information + only for a given request + + + Get the simulator the parcel data was retrieved from + + + Get the list of primitive IDs + + + true if the list is clean and contains the information + only for a given request + + + Contains data when the media data for a parcel the avatar is on changes + + + + Construct a new instance of the ParcelMediaUpdateReplyEventArgs class + + the simulator the parcel media data was updated in + The updated media information + + + Get the simulator the parcel media data was updated in + + + Get the updated media information + + + Contains the media command for a parcel the agent is currently on + + + + Construct a new instance of the ParcelMediaCommandEventArgs class + + The simulator the parcel media command was issued in + + + The media command that was sent + + + + Get the simulator the parcel media command was issued in + + + + + + + + + Get the media command that was sent + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + The ObservableDictionary class is used for storing key/value pairs. It has methods for firing + events to subscribers when items are added, removed, or changed. + + Key + Value + + + + A dictionary of callbacks to fire when specified action occurs + + + + + Register a callback to be fired when an action occurs + + The action + The callback to fire + + + + Unregister a callback + + The action + The callback to fire + + + + + + + + + + Internal dictionary that this class wraps around. Do not + modify or enumerate the contents of this dictionary without locking + + + + Initializes a new instance of the Class + with the specified key/value, has the default initial capacity. + + + + // initialize a new ObservableDictionary named testDict with a string as the key and an int as the value. + public ObservableDictionary<string, int> testDict = new ObservableDictionary<string, int>(); + + + + + + Initializes a new instance of the Class + with the specified key/value, With its initial capacity specified. + + Initial size of dictionary + + + // initialize a new ObservableDictionary named testDict with a string as the key and an int as the value, + // initially allocated room for 10 entries. + public ObservableDictionary<string, int> testDict = new ObservableDictionary<string, int>(10); + + + + + + Try to get entry from the with specified key + + Key to use for lookup + Value returned + if specified key exists, if not found + + + // find your avatar using the Simulator.ObjectsAvatars ObservableDictionary: + Avatar av; + if (Client.Network.CurrentSim.ObjectsAvatars.TryGetValue(Client.Self.AgentID, out av)) + Console.WriteLine("Found Avatar {0}", av.Name); + + + + + + + Finds the specified match. + + The match. + Matched value + + + // use a delegate to find a prim in the ObjectsPrimitives ObservableDictionary + // with the ID 95683496 + uint findID = 95683496; + Primitive findPrim = sim.ObjectsPrimitives.Find( + delegate(Primitive prim) { return prim.ID == findID; }); + + + + + Find All items in an + return matching items. + a containing found items. + + Find All prims within 20 meters and store them in a List + + int radius = 20; + List<Primitive> prims = Client.Network.CurrentSim.ObjectsPrimitives.FindAll( + delegate(Primitive prim) { + Vector3 pos = prim.Position; + return ((prim.ParentID == 0) && (pos != Vector3.Zero) && (Vector3.Distance(pos, location) < radius)); + } + ); + + + + + Find All items in an + return matching keys. + a containing found keys. + + Find All keys which also exist in another dictionary + + List<UUID> matches = myDict.FindAll( + delegate(UUID id) { + return myOtherDict.ContainsKey(id); + } + ); + + + + + Check if Key exists in Dictionary + Key to check for + if found, otherwise + + + Check if Value exists in Dictionary + Value to check for + if found, otherwise + + + + Adds the specified key to the dictionary, dictionary locking is not performed, + + + The key + The value + + + + Removes the specified key, dictionary locking is not performed + + The key. + if successful, otherwise + + + + Clear the contents of the dictionary + + + + + Enumerator for iterating dictionary entries + + + + + + Gets the number of Key/Value pairs contained in the + + + + + Indexer for the dictionary + + The key + The value + + + + A Wrapper around openjpeg to encode and decode images to and from byte arrays + + + + TGA Header size + + + OpenJPEG is not threadsafe, so this object is used to lock + during calls into unmanaged code + + + + Encode a object into a byte array + + The object to encode + true to enable lossless conversion, only useful for small images ie: sculptmaps + A byte array containing the encoded Image object + + + + Encode a object into a byte array + + The object to encode + a byte array of the encoded image + + + + Decode JPEG2000 data to an and + + + JPEG2000 encoded data + ManagedImage object to decode to + Image object to decode to + True if the decode succeeds, otherwise false + + + + + + + + + + + + + + + + + + + + + Encode a object into a byte array + + The source object to encode + true to enable lossless decoding + A byte array containing the source Bitmap object + + + + Defines the beginning and ending file positions of a layer in an + LRCP-progression JPEG2000 file + + + + + This structure is used to marshal both encoded and decoded images. + MUST MATCH THE STRUCT IN dotnet.h! + + + + + Information about a single packet in a JPEG2000 stream + + + + Packet start position + + + Packet header end position + + + Packet end position + + + + Represents a Sound Asset + + + + Initializes a new instance of an AssetSound object + + + Initializes a new instance of an AssetSound object with parameters + A unique specific to this asset + A byte array containing the raw asset data + + + + TODO: Encodes a sound file + + + + + TODO: Decode a sound file + + true + + + Override the base classes AssetType + + + + Represents a Landmark with RegionID and Position vector + + + + UUID of the Landmark target region + + + Local position of the target + + + Construct an Asset of type Landmark + + + + Construct an Asset object of type Landmark + + A unique specific to this asset + A byte array containing the raw asset data + + + + Constuct an asset of type Landmark + + UUID of the target region + Local position of landmark + + + + Encode the raw contents of a string with the specific Landmark format + + + + + Decode the raw asset data, populating the RegionID and Position + + true if the AssetData was successfully decoded to a UUID and Vector + + + Override the base classes AssetType + + + + Represents an that can be worn on an avatar + such as a Shirt, Pants, etc. + + + + + Represents a Wearable Asset, Clothing, Hair, Skin, Etc + + + + A string containing the name of the asset + + + A string containing a short description of the asset + + + The Assets WearableType + + + The For-Sale status of the object + + + An Integer representing the purchase price of the asset + + + The of the assets creator + + + The of the assets current owner + + + The of the assets prior owner + + + The of the Group this asset is set to + + + True if the asset is owned by a + + + The Permissions mask of the asset + + + A Dictionary containing Key/Value pairs of the objects parameters + + + A Dictionary containing Key/Value pairs where the Key is the textures Index and the Value is the Textures + + + Initializes a new instance of an AssetWearable object + + + Initializes a new instance of an AssetWearable object with parameters + A unique specific to this asset + A byte array containing the raw asset data + + + Initializes a new instance of an AssetWearable object with parameters + A string containing the asset parameters + + + + Decode an assets byte encoded data to a string + + true if the asset data was decoded successfully + + + + Encode the assets string represantion into a format consumable by the asset server + + + + Initializes a new instance of an AssetScriptBinary object + + + Initializes a new instance of an AssetScriptBinary object with parameters + A unique specific to this asset + A byte array containing the raw asset data + + + Initializes a new instance of an AssetScriptBinary object with parameters + A string containing the Clothings data + + + Override the base classes AssetType + + + + Represents an Animation + + + + Default Constructor + + + + Construct an Asset object of type Animation + + A unique specific to this asset + A byte array containing the raw asset data + + + Override the base classes AssetType + + + + Operation to apply when applying color to texture + + + + + Information needed to translate visual param value to RGBA color + + + + + Construct VisualColorParam + + Operation to apply when applying color to texture + Colors + + + + Represents alpha blending and bump infor for a visual parameter + such as sleive length + + + + Stregth of the alpha to apply + + + File containing the alpha channel + + + Skip blending if parameter value is 0 + + + Use miltiply insted of alpha blending + + + + Create new alhpa information for a visual param + + Stregth of the alpha to apply + File containing the alpha channel + Skip blending if parameter value is 0 + Use miltiply insted of alpha blending + + + + A single visual characteristic of an avatar mesh, such as eyebrow height + + + + Index of this visual param + + + Internal name + + + Group ID this parameter belongs to + + + Name of the wearable this parameter belongs to + + + Displayable label of this characteristic + + + Displayable label for the minimum value of this characteristic + + + Displayable label for the maximum value of this characteristic + + + Default value + + + Minimum value + + + Maximum value + + + Is this param used for creation of bump layer? + + + Alpha blending/bump info + + + Color information + + + Array of param IDs that are drivers for this parameter + + + + Set all the values through the constructor + + Index of this visual param + Internal name + + + Displayable label of this characteristic + Displayable label for the minimum value of this characteristic + Displayable label for the maximum value of this characteristic + Default value + Minimum value + Maximum value + Is this param used for creation of bump layer? + Array of param IDs that are drivers for this parameter + Alpha blending/bump info + Color information + + + + Holds the Params array of all the avatar appearance parameters + + + + X position of this patch + + + Y position of this patch + + + A 16x16 array of floats holding decompressed layer data + + + + Creates a LayerData packet for compressed land data given a full + simulator heightmap and an array of indices of patches to compress + + A 256 * 256 array of floating point values + specifying the height at each meter in the simulator + Array of indexes in the 16x16 grid of patches + for this simulator. For example if 1 and 17 are specified, patches + x=1,y=0 and x=1,y=1 are sent + + + + + Add a patch of terrain to a BitPacker + + BitPacker to write the patch to + Heightmap of the simulator, must be a 256 * + 256 float array + X offset of the patch to create, valid values are + from 0 to 15 + Y offset of the patch to create, valid values are + from 0 to 15 + + + + A Name Value pair with additional settings, used in the protocol + primarily to transmit avatar names and active group in object packets + + + + + + + + + + + + + + + + + + + + Constructor that takes all the fields as parameters + + + + + + + + + + Constructor that takes a single line from a NameValue field + + + + + Type of the value + + + Unknown + + + String value + + + + + + + + + + + + + + + Deprecated + + + String value, but designated as an asset + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Starts a thread that keeps the daemon running + + + + + + + Stops the daemon and the thread keeping it running + + + + + + + + + + + + + This is used to initialize and stop the Connector as a whole. The Connector + Create call must be completed successfully before any other requests are made + (typically during application initialization). The shutdown should be called + when the application is shutting down to gracefully release resources + + A string value indicting the Application name + URL for the management server + LoggingSettings + + + + + + Shutdown Connector -- Should be called when the application is shutting down + to gracefully release resources + + Handle returned from successful Connector ‘create’ request + + + + Mute or unmute the microphone + + Handle returned from successful Connector ‘create’ request + true (mute) or false (unmute) + + + + Mute or unmute the speaker + + Handle returned from successful Connector ‘create’ request + true (mute) or false (unmute) + + + + Set microphone volume + + Handle returned from successful Connector ‘create’ request + The level of the audio, a number between -100 and 100 where + 0 represents ‘normal’ speaking volume + + + + Set local speaker volume + + Handle returned from successful Connector ‘create’ request + The level of the audio, a number between -100 and 100 where + 0 represents ‘normal’ speaking volume + + + + Create a Session + Sessions typically represent a connection to a media session with one or more + participants. This is used to generate an ‘outbound’ call to another user or + channel. The specifics depend on the media types involved. A session handle is + required to control the local user functions within the session (or remote + users if the current account has rights to do so). Currently creating a + session automatically connects to the audio media, there is no need to call + Session.Connect at this time, this is reserved for future use. + + Handle returned from successful Connector ‘create’ request + This is the URI of the terminating point of the session (ie who/what is being called) + This is the display name of the entity being called (user or channel) + Only needs to be supplied when the target URI is password protected + This indicates the format of the password as passed in. This can either be + “ClearText” or “SHA1UserName”. If this element does not exist, it is assumed to be “ClearText”. If it is + “SHA1UserName”, the password as passed in is the SHA1 hash of the password and username concatenated together, + then base64 encoded, with the final “=” character stripped off. + + + + + + + Used to accept a call + + SessionHandle such as received from SessionNewEvent + "default" + + + + + This command is used to start the audio render process, which will then play + the passed in file through the selected audio render device. This command + should not be issued if the user is on a call. + + The fully qualified path to the sound file. + True if the file is to be played continuously and false if it is should be played once. + + + + + This command is used to stop the audio render process. + + The fully qualified path to the sound file issued in the start render command. + + + + + This is used to ‘end’ an established session (i.e. hang-up or disconnect). + + Handle returned from successful Session ‘create’ request or a SessionNewEvent + + + + + Set the combined speaking and listening position in 3D space. + + Handle returned from successful Session ‘create’ request or a SessionNewEvent + Speaking position + Listening position + + + + + Set User Volume for a particular user. Does not affect how other users hear that user. + + Handle returned from successful Session ‘create’ request or a SessionNewEvent + + The level of the audio, a number between -100 and 100 where 0 represents ‘normal’ speaking volume + + + + + Start up the Voice service. + + + + + Handle miscellaneous request status + + + + ///If something goes wrong, we log it. + + + + Cleanup oject resources + + + + + Request voice cap when changing regions + + + + + Handle a change in session state + + + + + Close a voice session + + + + + + Locate a Session context from its handle + + Creates the session context if it does not exist. + + + + Handle completion of main voice cap request. + + + + + + + + Daemon has started so connect to it. + + + + + The daemon TCP connection is open. + + + + + Handle creation of the Connector. + + + + + Handle response to audio output device query + + + + + Handle response to audio input device query + + + + + Set voice channel for new parcel + + + + + + Request info from a parcel capability Uri. + + + + + + Receive parcel voice cap + + + + + + + + Tell Vivox where we are standing + + This has to be called when we move or turn. + + + + Start and stop updating out position. + + + + + + This is used to login a specific user account(s). It may only be called after + Connector initialization has completed successfully + + Handle returned from successful Connector ‘create’ request + User's account name + User's account password + Values may be “AutoAnswer” or “VerifyAnswer” + "" + This is an integer that specifies how often + the daemon will send participant property events while in a channel. If this is not set + the default will be “on state change”, which means that the events will be sent when + the participant starts talking, stops talking, is muted, is unmuted. + The valid values are: + 0 – Never + 5 – 10 times per second + 10 – 5 times per second + 50 – 1 time per second + 100 – on participant state change (this is the default) + false + + + + + This is used to logout a user session. It should only be called with a valid AccountHandle. + + Handle returned from successful Connector ‘login’ request + + + + + This is used to get a list of audio devices that can be used for capture (input) of voice. + + + + + + This is used to get a list of audio devices that can be used for render (playback) of voice. + + + + + This command is used to select the render device. + + The name of the device as returned by the Aux.GetRenderDevices command. + + + + This command is used to select the capture device. + + The name of the device as returned by the Aux.GetCaptureDevices command. + + + + This command is used to start the audio capture process which will cause + AuxAudioProperty Events to be raised. These events can be used to display a + microphone VU meter for the currently selected capture device. This command + should not be issued if the user is on a call. + + (unused but required) + + + + + This command is used to stop the audio capture process. + + + + + + This command is used to set the mic volume while in the audio tuning process. + Once an acceptable mic level is attained, the application must issue a + connector set mic volume command to have that level be used while on voice + calls. + + the microphone volume (-100 to 100 inclusive) + + + + + This command is used to set the speaker volume while in the audio tuning + process. Once an acceptable speaker level is attained, the application must + issue a connector set speaker volume command to have that level be used while + on voice calls. + + the speaker volume (-100 to 100 inclusive) + + + + + Event for most mundane request reposnses. + + + + Response to Connector.Create request + + + Response to Aux.GetCaptureDevices request + + + Response to Aux.GetRenderDevices request + + + Audio Properties Events are sent after audio capture is started. + These events are used to display a microphone VU meter + + + Response to Account.Login request + + + This event message is sent whenever the login state of the + particular Account has transitioned from one value to another + + + + List of audio input devices + + + + + List of audio output devices + + + + + Set audio test mode + + + + Enable logging + + + The folder where any logs will be created + + + This will be prepended to beginning of each log file + + + The suffix or extension to be appended to each log file + + + + 0: NONE - No logging + 1: ERROR - Log errors only + 2: WARNING - Log errors and warnings + 3: INFO - Log errors, warnings and info + 4: DEBUG - Log errors, warnings, info and debug + + + + + Constructor for default logging settings + + + + Audio Properties Events are sent after audio capture is started. These events are used to display a microphone VU meter + + + + Interface requirements for Messaging system + + + + + The current status of a texture request as it moves through the pipeline or final result of a texture request. + + + + The initial state given to a request. Requests in this state + are waiting for an available slot in the pipeline + + + A request that has been added to the pipeline and the request packet + has been sent to the simulator + + + A request that has received one or more packets back from the simulator + + + A request that has received all packets back from the simulator + + + A request that has taken longer than + to download OR the initial packet containing the packet information was never received + + + The texture request was aborted by request of the agent + + + The simulator replied to the request that it was not able to find the requested texture + + + + A callback fired to indicate the status or final state of the requested texture. For progressive + downloads this will fire each time new asset data is returned from the simulator. + + The indicating either Progress for textures not fully downloaded, + or the final result of the request after it has been processed through the TexturePipeline + The object containing the Assets ID, raw data + and other information. For progressive rendering the will contain + the data from the beginning of the file. For failed, aborted and timed out requests it will contain + an empty byte array. + + + + Texture request download handler, allows a configurable number of download slots which manage multiple + concurrent texture downloads from the + + This class makes full use of the internal + system for full texture downloads. + + + A dictionary containing all pending and in-process transfer requests where the Key is both the RequestID + and also the Asset Texture ID, and the value is an object containing the current state of the request and also + the asset data as it is being re-assembled + + + Holds the reference to the client object + + + Maximum concurrent texture requests allowed at a time + + + An array of objects used to manage worker request threads + + + An array of worker slots which shows the availablity status of the slot + + + The primary thread which manages the requests. + + + true if the TexturePipeline is currently running + + + A synchronization object used by the primary thread + + + A refresh timer used to increase the priority of stalled requests + + + + Default constructor, Instantiates a new copy of the TexturePipeline class + + Reference to the instantiated object + + + + Initialize callbacks required for the TexturePipeline to operate + + + + + Shutdown the TexturePipeline and cleanup any callbacks or transfers + + + + + Request a texture asset from the simulator using the system to + manage the requests and re-assemble the image from the packets received from the simulator + + The of the texture asset to download + The of the texture asset. + Use for most textures, or for baked layer texture assets + A float indicating the requested priority for the transfer. Higher priority values tell the simulator + to prioritize the request before lower valued requests. An image already being transferred using the can have + its priority changed by resending the request with the new priority value + Number of quality layers to discard. + This controls the end marker of the data sent + The packet number to begin the request at. A value of 0 begins the request + from the start of the asset texture + The callback to fire when the image is retrieved. The callback + will contain the result of the request and the texture asset data + If true, the callback will be fired for each chunk of the downloaded image. + The callback asset parameter will contain all previously received chunks of the texture asset starting + from the beginning of the request + + + + Sends the actual request packet to the simulator + + The image to download + Type of the image to download, either a baked + avatar texture or a normal texture + Priority level of the download. Default is + 1,013,000.0f + Number of quality layers to discard. + This controls the end marker of the data sent + Packet number to start the download at. + This controls the start marker of the data sent + Sending a priority of 0 and a discardlevel of -1 aborts + download + + + + Cancel a pending or in process texture request + + The texture assets unique ID + + + + Master Download Thread, Queues up downloads in the threadpool + + + + + The worker thread that sends the request and handles timeouts + + A object containing the request details + + + + Handle responses from the simulator that tell us a texture we have requested is unable to be located + or no longer exists. This will remove the request from the pipeline and free up a slot if one is in use + + The sender + The EventArgs object containing the packet data + + + + Handles the remaining Image data that did not fit in the initial ImageData packet + + The sender + The EventArgs object containing the packet data + + + + Handle the initial ImageDataPacket sent from the simulator + + The sender + The EventArgs object containing the packet data + + + Current number of pending and in-process transfers + + + + A request task containing information and status of a request as it is processed through the + + + + The current which identifies the current status of the request + + + The Unique Request ID, This is also the Asset ID of the texture being requested + + + The slot this request is occupying in the threadpoolSlots array + + + The ImageType of the request. + + + The callback to fire when the request is complete, will include + the and the + object containing the result data + + + If true, indicates the callback will be fired whenever new data is returned from the simulator. + This is used to progressively render textures as portions of the texture are received. + + + An object that maintains the data of an request thats in-process. + + + + Type of gesture step + + + + + Base class for gesture steps + + + + + Retururns what kind of gesture step this is + + + + + Describes animation step of a gesture + + + + + If true, this step represents start of animation, otherwise animation stop + + + + + Animation asset + + + + + Animation inventory name + + + + + Returns what kind of gesture step this is + + + + + Describes sound step of a gesture + + + + + Sound asset + + + + + Sound inventory name + + + + + Returns what kind of gesture step this is + + + + + Describes sound step of a gesture + + + + + Text to output in chat + + + + + Returns what kind of gesture step this is + + + + + Describes sound step of a gesture + + + + + If true in this step we wait for all animations to finish + + + + + If true gesture player should wait for the specified amount of time + + + + + Time in seconds to wait if WaitForAnimation is false + + + + + Returns what kind of gesture step this is + + + + + Describes the final step of a gesture + + + + + Returns what kind of gesture step this is + + + + + Represents a sequence of animations, sounds, and chat actions + + + + + Keyboard key that triggers the gestyre + + + + + Modifier to the trigger key + + + + + String that triggers playing of the gesture sequence + + + + + Text that replaces trigger in chat once gesture is triggered + + + + + Sequence of gesture steps + + + + + Constructs guesture asset + + + + + Constructs guesture asset + + A unique specific to this asset + A byte array containing the raw asset data + + + + Encodes gesture asset suitable for uplaod + + + + + Decodes gesture assset into play sequence + + true if the asset data was decoded successfully + + + + Returns asset type + + + + + Permissions for control of object media + + + + + Style of cotrols that shold be displayed to the user + + + + + Class representing media data for a single face + + + + Is display of the alternative image enabled + + + Should media auto loop + + + Shoule media be auto played + + + Auto scale media to prim face + + + Should viewer automatically zoom in on the face when clicked + + + Should viewer interpret first click as interaction with the media + or when false should the first click be treated as zoom in commadn + + + Style of controls viewer should display when + viewer media on this face + + + Starting URL for the media + + + Currently navigated URL + + + Media height in pixes + + + Media width in pixels + + + Who can controls the media + + + Who can interact with the media + + + Is URL whitelist enabled + + + Array of URLs that are whitelisted + + + + Serialize to OSD + + OSDMap with the serialized data + + + + Deserialize from OSD data + + Serialized OSD data + Deserialized object + + + + Particle system specific enumerators, flags and methods. + + + + + Current version of the media data for the prim + + + + + Array of media entries indexed by face number + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Foliage type for this primitive. Only applicable if this + primitive is foliage + + + Unknown + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Identifies the owner if audio or a particle system is + active + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Default constructor + + + + + Packs PathTwist, PathTwistBegin, PathRadiusOffset, and PathSkew + parameters in to signed eight bit values + + Floating point parameter to pack + Signed eight bit value containing the packed parameter + + + + Unpacks PathTwist, PathTwistBegin, PathRadiusOffset, and PathSkew + parameters from signed eight bit integers to floating point values + + Signed eight bit value to unpack + Unpacked floating point value + + + Uses basic heuristics to estimate the primitive shape + + + + Texture animation mode + + + + Disable texture animation + + + Enable texture animation + + + Loop when animating textures + + + Animate in reverse direction + + + Animate forward then reverse + + + Slide texture smoothly instead of frame-stepping + + + Rotate texture instead of using frames + + + Scale texture instead of using frames + + + + A single textured face. Don't instantiate this class yourself, use the + methods in TextureEntry + + + + + Contains the definition for individual faces + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + In the future this will specify whether a webpage is + attached to this face + + + + + + + Represents all of the texturable faces for an object + + Grid objects have infinite faces, with each face + using the properties of the default face unless set otherwise. So if + you have a TextureEntry with a default texture uuid of X, and face 18 + has a texture UUID of Y, every face would be textured with X except for + face 18 that uses Y. In practice however, primitives utilize a maximum + of nine faces + + + + + + + + + + Constructor that takes a default texture UUID + + Texture UUID to use as the default texture + + + + Constructor that takes a TextureEntryFace for the + default face + + Face to use as the default face + + + + Constructor that creates the TextureEntry class from a byte array + + Byte array containing the TextureEntry field + Starting position of the TextureEntry field in + the byte array + Length of the TextureEntry field, in bytes + + + + This will either create a new face if a custom face for the given + index is not defined, or return the custom face for that index if + it already exists + + The index number of the face to create or + retrieve + A TextureEntryFace containing all the properties for that + face + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Controls the texture animation of a particular prim + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Complete structure for the particle system + + + + Particle Flags + There appears to be more data packed in to this area + for many particle systems. It doesn't appear to be flag values + and serialization breaks unless there is a flag for every + possible bit so it is left as an unsigned integer + + + pattern of particles + + + A representing the maximimum age (in seconds) particle will be displayed + Maximum value is 30 seconds + + + A representing the number of seconds, + from when the particle source comes into view, + or the particle system's creation, that the object will emits particles; + after this time period no more particles are emitted + + + A in radians that specifies where particles will not be created + + + A in radians that specifies where particles will be created + + + A representing the number of seconds between burts. + + + A representing the number of meters + around the center of the source where particles will be created. + + + A representing in seconds, the minimum speed between bursts of new particles + being emitted + + + A representing in seconds the maximum speed of new particles being emitted. + + + A representing the maximum number of particles emitted per burst + + + A which represents the velocity (speed) from the source which particles are emitted + + + A which represents the Acceleration from the source which particles are emitted + + + The Key of the texture displayed on the particle + + + The Key of the specified target object or avatar particles will follow + + + Flags of particle from + + + Max Age particle system will emit particles for + + + The the particle has at the beginning of its lifecycle + + + The the particle has at the ending of its lifecycle + + + A that represents the starting X size of the particle + Minimum value is 0, maximum value is 4 + + + A that represents the starting Y size of the particle + Minimum value is 0, maximum value is 4 + + + A that represents the ending X size of the particle + Minimum value is 0, maximum value is 4 + + + A that represents the ending Y size of the particle + Minimum value is 0, maximum value is 4 + + + + Decodes a byte[] array into a ParticleSystem Object + + ParticleSystem object + Start position for BitPacker + + + + Generate byte[] array from particle data + + Byte array + + + + Particle source pattern + + + + None + + + Drop particles from source position with no force + + + "Explode" particles in all directions + + + Particles shoot across a 2D area + + + Particles shoot across a 3D Cone + + + Inverse of AngleCone (shoot particles everywhere except the 3D cone defined + + + + Particle Data Flags + + + + None + + + Interpolate color and alpha from start to end + + + Interpolate scale from start to end + + + Bounce particles off particle sources Z height + + + velocity of particles is dampened toward the simulators wind + + + Particles follow the source + + + Particles point towards the direction of source's velocity + + + Target of the particles + + + Particles are sent in a straight line + + + Particles emit a glow + + + used for point/grab/touch + + + + Particle Flags Enum + + + + None + + + Acceleration and velocity for particles are + relative to the object rotation + + + Particles use new 'correct' angle parameters + + + + Parameters used to construct a visual representation of a primitive + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Attachment point to an avatar + + + + + + + + + + + + + + + + Information on the flexible properties of a primitive + + + + + + + + + + + + + + + + + + + + + + + Default constructor + + + + + + + + + + + + + + + + + + + + + + + + Information on the light properties of a primitive + + + + + + + + + + + + + + + + + + + + Default constructor + + + + + + + + + + + + + + + + + + + + + + + + Information on the sculpt properties of a sculpted primitive + + + + + Default constructor + + + + + + + + + + + + Render inside out (inverts the normals). + + + + + Render an X axis mirror of the sculpty. + + + + + Extended properties to describe an object + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Default constructor + + + + + Set the properties that are set in an ObjectPropertiesFamily packet + + that has + been partially filled by an ObjectPropertiesFamily packet + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Map layer request type + + + + Objects and terrain are shown + + + Only the terrain is shown, no objects + + + Overlay showing land for sale and for auction + + + + Type of grid item, such as telehub, event, populator location, etc. + + + + Telehub + + + PG rated event + + + Mature rated event + + + Popular location + + + Locations of avatar groups in a region + + + Land for sale + + + Classified ad + + + Adult rated event + + + Adult land for sale + + + + Information about a region on the grid map + + + + Sim X position on World Map + + + Sim Y position on World Map + + + Sim Name (NOTE: In lowercase!) + + + + + + Appears to always be zero (None) + + + Sim's defined Water Height + + + + + + UUID of the World Map image + + + Unique identifier for this region, a combination of the X + and Y position + + + + + + + + + + + + + + + + + + + + + + + Visual chunk of the grid map + + + + + Base class for Map Items + + + + The Global X position of the item + + + The Global Y position of the item + + + Get the Local X position of the item + + + Get the Local Y position of the item + + + Get the Handle of the region + + + + Represents an agent or group of agents location + + + + + Represents a Telehub location + + + + + Represents a non-adult parcel of land for sale + + + + + Represents an Adult parcel of land for sale + + + + + Represents a PG Event + + + + + Represents a Mature event + + + + + Represents an Adult event + + + + + Manages grid-wide tasks such as the world map + + + + The event subscribers. null if no subcribers + + + Raises the CoarseLocationUpdate event + A CoarseLocationUpdateEventArgs object containing the + data sent by simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the GridRegion event + A GridRegionEventArgs object containing the + data sent by simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the GridLayer event + A GridLayerEventArgs object containing the + data sent by simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the GridItems event + A GridItemEventArgs object containing the + data sent by simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the RegionHandleReply event + A RegionHandleReplyEventArgs object containing the + data sent by simulator + + + Thread sync lock object + + + A dictionary of all the regions, indexed by region name + + + A dictionary of all the regions, indexed by region handle + + + + Constructor + + Instance of GridClient object to associate with this GridManager instance + + + + + + + + + + Request a map layer + + The name of the region + The type of layer + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Request data for all mainland (Linden managed) simulators + + + + + Request the region handle for the specified region UUID + + UUID of the region to look up + + + + Get grid region information using the region name, this function + will block until it can find the region or gives up + + Name of sim you're looking for + Layer that you are requesting + Will contain a GridRegion for the sim you're + looking for if successful, otherwise an empty structure + True if the GridRegion was successfully fetched, otherwise + false + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Raised when the simulator sends a + containing the location of agents in the simulator + + + Raised when the simulator sends a Region Data in response to + a Map request + + + Raised when the simulator sends GridLayer object containing + a map tile coordinates and texture information + + + Raised when the simulator sends GridItems object containing + details on events, land sales at a specific location + + + Raised in response to a Region lookup + + + Unknown + + + Current direction of the sun + + + Current angular velocity of the sun + + + Current world time + + + + Main class to expose grid functionality to clients. All of the + classes needed for sending and receiving data are accessible through + this class. + + + + // Example minimum code required to instantiate class and + // connect to a simulator. + using System; + using System.Collections.Generic; + using System.Text; + using OpenMetaverse; + + namespace FirstBot + { + class Bot + { + public static GridClient Client; + static void Main(string[] args) + { + Client = new GridClient(); // instantiates the GridClient class + // to the global Client object + // Login to Simulator + Client.Network.Login("FirstName", "LastName", "Password", "FirstBot", "1.0"); + // Wait for a Keypress + Console.ReadLine(); + // Logout of simulator + Client.Network.Logout(); + } + } + } + + + + + Networking subsystem + + + Settings class including constant values and changeable + parameters for everything + + + Parcel (subdivided simulator lots) subsystem + + + Our own avatars subsystem + + + Other avatars subsystem + + + Estate subsystem + + + Friends list subsystem + + + Grid (aka simulator group) subsystem + + + Object subsystem + + + Group subsystem + + + Asset subsystem + + + Appearance subsystem + + + Inventory subsystem + + + Directory searches including classifieds, people, land + sales, etc + + + Handles land, wind, and cloud heightmaps + + + Handles sound-related networking + + + Throttling total bandwidth usage, or allocating bandwidth + for specific data stream types + + + + Default constructor + + + + + Return the full name of this instance + + Client avatars full name + + + + Attempts to convert an LLSD structure to a known Packet type + + Event name, this must match an actual + packet name for a Packet to be successfully built + LLSD to convert to a Packet + A Packet on success, otherwise null + + + + Class that handles the local asset cache + + + + + Default constructor + + A reference to the GridClient object + + + + Disposes cleanup timer + + + + + Only create timer when needed + + + + + Return bytes read from the local asset cache, null if it does not exist + + UUID of the asset we want to get + Raw bytes of the asset, or null on failure + + + + Returns ImageDownload object of the + image from the local image cache, null if it does not exist + + UUID of the image we want to get + ImageDownload object containing the image, or null on failure + + + + Constructs a file name of the cached asset + + UUID of the asset + String with the file name of the cahced asset + + + + Saves an asset to the local cache + + UUID of the asset + Raw bytes the asset consists of + Weather the operation was successfull + + + + Get the file name of the asset stored with gived UUID + + UUID of the asset + Null if we don't have that UUID cached on disk, file name if found in the cache folder + + + + Checks if the asset exists in the local cache + + UUID of the asset + True is the asset is stored in the cache, otherwise false + + + + Wipes out entire cache + + + + + Brings cache size to the 90% of the max size + + + + + Asynchronously brings cache size to the 90% of the max size + + + + + Adds up file sizes passes in a FileInfo array + + + + + Checks whether caching is enabled + + + + + Periodically prune the cache + + + + + Nicely formats file sizes + + Byte size we want to output + String with humanly readable file size + + + + Allows setting weather to periodicale prune the cache if it grows too big + Default is enabled, when caching is enabled + + + + + How long (in ms) between cache checks (default is 5 min.) + + + + + Helper class for sorting files by their last accessed time + + + + + Extract the avatar UUID encoded in a SIP URI + + + + + + + Represents an LSL Text object containing a string of UTF encoded characters + + + + A string of characters represting the script contents + + + Initializes a new AssetScriptText object + + + + Initializes a new AssetScriptText object with parameters + + A unique specific to this asset + A byte array containing the raw asset data + + + + Initializes a new AssetScriptText object with parameters + + A string containing the scripts contents + + + + Encode a string containing the scripts contents into byte encoded AssetData + + + + + Decode a byte array containing the scripts contents into a string + + true if decoding is successful + + + Override the base classes AssetType + + + + NetworkManager is responsible for managing the network layer of + OpenMetaverse. It tracks all the server connections, serializes + outgoing traffic and deserializes incoming traffic, and provides + instances of delegates for network-related events. + + + Login Routines + + + + The event subscribers, null of no subscribers + + + Raises the PacketSent Event + A PacketSentEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the LoggedOut Event + A LoggedOutEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the SimConnecting Event + A SimConnectingEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the SimConnected Event + A SimConnectedEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the SimDisconnected Event + A SimDisconnectedEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the Disconnected Event + A DisconnectedEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the SimChanged Event + A SimChangedEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the EventQueueRunning Event + A EventQueueRunningEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + All of the simulators we are currently connected to + + + Handlers for incoming capability events + + + Handlers for incoming packets + + + Incoming packets that are awaiting handling + + + Outgoing packets that are awaiting handling + + + + Default constructor + + Reference to the GridClient object + + + + Register an event handler for a packet. This is a low level event + interface and should only be used if you are doing something not + supported in the library + + Packet type to trigger events for + Callback to fire when a packet of this type + is received + + + + Unregister an event handler for a packet. This is a low level event + interface and should only be used if you are doing something not + supported in the library + + Packet type this callback is registered with + Callback to stop firing events for + + + + Register a CAPS event handler. This is a low level event interface + and should only be used if you are doing something not supported in + the library + + Name of the CAPS event to register a handler for + Callback to fire when a CAPS event is received + + + + Unregister a CAPS event handler. This is a low level event interface + and should only be used if you are doing something not supported in + the library + + Name of the CAPS event this callback is + registered with + Callback to stop firing events for + + + + Send a packet to the simulator the avatar is currently occupying + + Packet to send + + + + Send a packet to a specified simulator + + Packet to send + Simulator to send the packet to + + + + Connect to a simulator + + IP address to connect to + Port to connect to + Handle for this simulator, to identify its + location in the grid + Whether to set CurrentSim to this new + connection, use this if the avatar is moving in to this simulator + URL of the capabilities server to use for + this sim connection + A Simulator object on success, otherwise null + + + + Connect to a simulator + + IP address and port to connect to + Handle for this simulator, to identify its + location in the grid + Whether to set CurrentSim to this new + connection, use this if the avatar is moving in to this simulator + URL of the capabilities server to use for + this sim connection + A Simulator object on success, otherwise null + + + + Initiate a blocking logout request. This will return when the logout + handshake has completed or when Settings.LOGOUT_TIMEOUT + has expired and the network layer is manually shut down + + + + + Initiate the logout process. Check if logout succeeded with the + OnLogoutReply event, and if this does not fire the + Shutdown() function needs to be manually called + + + + + Close a connection to the given simulator + + + + + + + Shutdown will disconnect all the sims except for the current sim + first, and then kill the connection to CurrentSim. This should only + be called if the logout process times out on RequestLogout + + Type of shutdown + + + + Shutdown will disconnect all the sims except for the current sim + first, and then kill the connection to CurrentSim. This should only + be called if the logout process times out on RequestLogout + + Type of shutdown + Shutdown message + + + + Searches through the list of currently connected simulators to find + one attached to the given IPEndPoint + + IPEndPoint of the Simulator to search for + A Simulator reference on success, otherwise null + + + + Fire an event when an event queue connects for capabilities + + Simulator the event queue is attached to + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + The event subscribers, null of no subscribers + + + Raises the LoginProgress Event + A LoginProgressEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + Seed CAPS URL returned from the login server + + + A list of packets obtained during the login process which + networkmanager will log but not process + + + + Generate sane default values for a login request + + Account first name + Account last name + Account password + Client application name + Client application version + A populated struct containing + sane defaults + + + + Simplified login that takes the most common and required fields + + Account first name + Account last name + Account password + Client application name + Client application version + Whether the login was successful or not. On failure the + LoginErrorKey string will contain the error code and LoginMessage + will contain a description of the error + + + + Simplified login that takes the most common fields along with a + starting location URI, and can accept an MD5 string instead of a + plaintext password + + Account first name + Account last name + Account password or MD5 hash of the password + such as $1$1682a1e45e9f957dcdf0bb56eb43319c + Client application name + Starting location URI that can be built with + StartLocation() + Client application version + Whether the login was successful or not. On failure the + LoginErrorKey string will contain the error code and LoginMessage + will contain a description of the error + + + + Login that takes a struct of all the values that will be passed to + the login server + + The values that will be passed to the login + server, all fields must be set even if they are String.Empty + Whether the login was successful or not. On failure the + LoginErrorKey string will contain the error code and LoginMessage + will contain a description of the error + + + + Build a start location URI for passing to the Login function + + Name of the simulator to start in + X coordinate to start at + Y coordinate to start at + Z coordinate to start at + String with a URI that can be used to login to a specified + location + + + + Handles response from XML-RPC login replies + + + + + Handle response from LLSD login replies + + + + + + + + Get current OS + + Either "Win" or "Linux" + + + + Get clients default Mac Address + + A string containing the first found Mac Address + + + Raised when the simulator sends us data containing + ... + + + Raised when the simulator sends us data containing + ... + + + Raised when the simulator sends us data containing + ... + + + Raised when the simulator sends us data containing + ... + + + Raised when the simulator sends us data containing + ... + + + Raised when the simulator sends us data containing + ... + + + Raised when the simulator sends us data containing + ... + + + Raised when the simulator sends us data containing + ... + + + Unique identifier associated with our connections to + simulators + + + The simulator that the logged in avatar is currently + occupying + + + Shows whether the network layer is logged in to the + grid or not + + + Number of packets in the incoming queue + + + Number of packets in the outgoing queue + + + Raised when the simulator sends us data containing + ... + + + Called when a reply is received from the login server, the + login sequence will block until this event returns + + + Current state of logging in + + + Upon login failure, contains a short string key for the + type of login error that occurred + + + The raw XML-RPC reply from the login server, exactly as it + was received (minus the HTTP header) + + + During login this contains a descriptive version of + LoginStatusCode. After a successful login this will contain the + message of the day, and after a failed login a descriptive error + message will be returned + + + + Explains why a simulator or the grid disconnected from us + + + + The client requested the logout or simulator disconnect + + + The server notified us that it is disconnecting + + + Either a socket was closed or network traffic timed out + + + The last active simulator shut down + + + + Holds a simulator reference and a decoded packet, these structs are put in + the packet inbox for event handling + + + + Reference to the simulator that this packet came from + + + Packet that needs to be processed + + + + Holds a simulator reference and a serialized packet, these structs are put in + the packet outbox for sending + + + + Reference to the simulator this packet is destined for + + + Packet that needs to be sent + + + Sequence number of the wrapped packet + + + Number of times this packet has been resent + + + Environment.TickCount when this packet was last sent over the wire + + + + + + + + + + + + + + Reads in a byte array of an Animation Asset created by the SecondLife(tm) client. + + + + + Rotation Keyframe count (used internally) + + + + + Position Keyframe count (used internally) + + + + + Animation Priority + + + + + The animation length in seconds. + + + + + Expression set in the client. Null if [None] is selected + + + + + The time in seconds to start the animation + + + + + The time in seconds to end the animation + + + + + Loop the animation + + + + + Meta data. Ease in Seconds. + + + + + Meta data. Ease out seconds. + + + + + Meta Data for the Hand Pose + + + + + Number of joints defined in the animation + + + + + Contains an array of joints + + + + + Searialize an animation asset into it's joints/keyframes/meta data + + + + + + Variable length strings seem to be null terminated in the animation asset.. but.. + use with caution, home grown. + advances the index. + + The animation asset byte array + The offset to start reading + a string + + + + Read in a Joint from an animation asset byte array + Variable length Joint fields, yay! + Advances the index + + animation asset byte array + Byte Offset of the start of the joint + The Joint data serialized into the binBVHJoint structure + + + + Read Keyframes of a certain type + advance i + + Animation Byte array + Offset in the Byte Array. Will be advanced + Number of Keyframes + Scaling Min to pass to the Uint16ToFloat method + Scaling Max to pass to the Uint16ToFloat method + + + + + A Joint and it's associated meta data and keyframes + + + + + Name of the Joint. Matches the avatar_skeleton.xml in client distros + + + + + Joint Animation Override? Was the same as the Priority in testing.. + + + + + Array of Rotation Keyframes in order from earliest to latest + + + + + Array of Position Keyframes in order from earliest to latest + This seems to only be for the Pelvis? + + + + + A Joint Keyframe. This is either a position or a rotation. + + + + + Either a Vector3 position or a Vector3 Euler rotation + + + + + Poses set in the animation metadata for the hands. + + + + + Manager class for our own avatar + + + + The event subscribers. null if no subcribers + + + Raises the ChatFromSimulator event + A ChatEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the ScriptDialog event + A SctriptDialogEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the ScriptQuestion event + A ScriptQuestionEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the LoadURL event + A LoadUrlEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the MoneyBalance event + A BalanceEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the MoneyBalanceReply event + A MoneyBalanceReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the IM event + A InstantMessageEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the TeleportProgress event + A TeleportEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the AgentDataReply event + A AgentDataReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the AnimationsChanged event + A AnimationsChangedEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the MeanCollision event + A MeanCollisionEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the RegionCrossed event + A RegionCrossedEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the GroupChatJoined event + A GroupChatJoinedEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the GroupChatLeft event + A GroupChatLeftEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the AlertMessage event + A AlertMessageEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the ScriptControlChange event + A ScriptControlEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the CameraConstraint event + A CameraConstraintEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the ScriptSensorReply event + A ScriptSensorReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the AvatarSitResponse event + A AvatarSitResponseEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the ChatSessionMemberAdded event + A ChatSessionMemberAddedEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the ChatSessionMemberLeft event + A ChatSessionMemberLeftEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + Reference to the GridClient instance + + + Used for movement and camera tracking + + + Currently playing animations for the agent. Can be used to + check the current movement status such as walking, hovering, aiming, + etc. by checking against system animations found in the Animations class + + + Dictionary containing current Group Chat sessions and members + + + + Constructor, setup callbacks for packets related to our avatar + + A reference to the Class + + + + Send a text message from the Agent to the Simulator + + A containing the message + The channel to send the message on, 0 is the public channel. Channels above 0 + can be used however only scripts listening on the specified channel will see the message + Denotes the type of message being sent, shout, whisper, etc. + + + + Request any instant messages sent while the client was offline to be resent. + + + + + Send an Instant Message to another Avatar + + The recipients + A containing the message to send + + + + Send an Instant Message to an existing group chat or conference chat + + The recipients + A containing the message to send + IM session ID (to differentiate between IM windows) + + + + Send an Instant Message + + The name this IM will show up as being from + Key of Avatar + Text message being sent + IM session ID (to differentiate between IM windows) + IDs of sessions for a conference + + + + Send an Instant Message + + The name this IM will show up as being from + Key of Avatar + Text message being sent + IM session ID (to differentiate between IM windows) + Type of instant message to send + Whether to IM offline avatars as well + Senders Position + RegionID Sender is In + Packed binary data that is specific to + the dialog type + + + + Send an Instant Message to a group + + of the group to send message to + Text Message being sent. + + + + Send an Instant Message to a group the agent is a member of + + The name this IM will show up as being from + of the group to send message to + Text message being sent + + + + Send a request to join a group chat session + + of Group to leave + + + + Exit a group chat session. This will stop further Group chat messages + from being sent until session is rejoined. + + of Group chat session to leave + + + + Reply to script dialog questions. + + Channel initial request came on + Index of button you're "clicking" + Label of button you're "clicking" + of Object that sent the dialog request + + + + + Accept invite for to a chatterbox session + + of session to accept invite to + + + + Start a friends conference + + List of UUIDs to start a conference with + the temportary session ID returned in the callback> + + + + Start a particle stream between an agent and an object + + Key of the source agent + Key of the target object + + The type from the enum + A unique for this effect + + + + Start a particle stream between an agent and an object + + Key of the source agent + Key of the target object + A representing the beams offset from the source + A which sets the avatars lookat animation + of the Effect + + + + Create a particle beam between an avatar and an primitive + + The ID of source avatar + The ID of the target primitive + global offset + A object containing the combined red, green, blue and alpha + color values of particle beam + a float representing the duration the parcicle beam will last + A Unique ID for the beam + + + + + Create a particle swirl around a target position using a packet + + global offset + A object containing the combined red, green, blue and alpha + color values of particle beam + a float representing the duration the parcicle beam will last + A Unique ID for the beam + + + + Sends a request to sit on the specified object + + of the object to sit on + Sit at offset + + + + Follows a call to to actually sit on the object + + + + Stands up from sitting on a prim or the ground + true of AgentUpdate was sent + + + + Does a "ground sit" at the avatar's current position + + + + + Starts or stops flying + + True to start flying, false to stop flying + + + + Starts or stops crouching + + True to start crouching, false to stop crouching + + + + Starts a jump (begin holding the jump key) + + + + + Use the autopilot sim function to move the avatar to a new + position. Uses double precision to get precise movements + + The z value is currently not handled properly by the simulator + Global X coordinate to move to + Global Y coordinate to move to + Z coordinate to move to + + + + Use the autopilot sim function to move the avatar to a new position + + The z value is currently not handled properly by the simulator + Integer value for the global X coordinate to move to + Integer value for the global Y coordinate to move to + Floating-point value for the Z coordinate to move to + + + + Use the autopilot sim function to move the avatar to a new position + + The z value is currently not handled properly by the simulator + Integer value for the local X coordinate to move to + Integer value for the local Y coordinate to move to + Floating-point value for the Z coordinate to move to + + + Macro to cancel autopilot sim function + Not certain if this is how it is really done + true if control flags were set and AgentUpdate was sent to the simulator + + + + Grabs an object + + an unsigned integer of the objects ID within the simulator + + + + + Overload: Grab a simulated object + + an unsigned integer of the objects ID within the simulator + + The texture coordinates to grab + The surface coordinates to grab + The face of the position to grab + The region coordinates of the position to grab + The surface normal of the position to grab (A normal is a vector perpindicular to the surface) + The surface binormal of the position to grab (A binormal is a vector tangen to the surface + pointing along the U direction of the tangent space + + + + Drag an object + + of the object to drag + Drag target in region coordinates + + + + Overload: Drag an object + + of the object to drag + Drag target in region coordinates + + The texture coordinates to grab + The surface coordinates to grab + The face of the position to grab + The region coordinates of the position to grab + The surface normal of the position to grab (A normal is a vector perpindicular to the surface) + The surface binormal of the position to grab (A binormal is a vector tangen to the surface + pointing along the U direction of the tangent space + + + + Release a grabbed object + + The Objects Simulator Local ID + + + + + + + Release a grabbed object + + The Objects Simulator Local ID + The texture coordinates to grab + The surface coordinates to grab + The face of the position to grab + The region coordinates of the position to grab + The surface normal of the position to grab (A normal is a vector perpindicular to the surface) + The surface binormal of the position to grab (A binormal is a vector tangen to the surface + pointing along the U direction of the tangent space + + + + Touches an object + + an unsigned integer of the objects ID within the simulator + + + + + Request the current L$ balance + + + + + Give Money to destination Avatar + + UUID of the Target Avatar + Amount in L$ + + + + Give Money to destination Avatar + + UUID of the Target Avatar + Amount in L$ + Description that will show up in the + recipients transaction history + + + + Give L$ to an object + + object to give money to + amount of L$ to give + name of object + + + + Give L$ to a group + + group to give money to + amount of L$ to give + + + + Give L$ to a group + + group to give money to + amount of L$ to give + description of transaction + + + + Pay texture/animation upload fee + + + + + Pay texture/animation upload fee + + description of the transaction + + + + Give Money to destination Object or Avatar + + UUID of the Target Object/Avatar + Amount in L$ + Reason (Optional normally) + The type of transaction + Transaction flags, mostly for identifying group + transactions + + + + Plays a gesture + + Asset of the gesture + + + + Mark gesture active + + Inventory of the gesture + Asset of the gesture + + + + Mark gesture inactive + + Inventory of the gesture + + + + Send an AgentAnimation packet that toggles a single animation on + + The of the animation to start playing + Whether to ensure delivery of this packet or not + + + + Send an AgentAnimation packet that toggles a single animation off + + The of a + currently playing animation to stop playing + Whether to ensure delivery of this packet or not + + + + Send an AgentAnimation packet that will toggle animations on or off + + A list of animation s, and whether to + turn that animation on or off + Whether to ensure delivery of this packet or not + + + + Teleports agent to their stored home location + + true on successful teleport to home location + + + + Teleport agent to a landmark + + of the landmark to teleport agent to + true on success, false on failure + + + + Attempt to look up a simulator name and teleport to the discovered + destination + + Region name to look up + Position to teleport to + True if the lookup and teleport were successful, otherwise + false + + + + Attempt to look up a simulator name and teleport to the discovered + destination + + Region name to look up + Position to teleport to + Target to look at + True if the lookup and teleport were successful, otherwise + false + + + + Teleport agent to another region + + handle of region to teleport agent to + position in destination sim to teleport to + true on success, false on failure + This call is blocking + + + + Teleport agent to another region + + handle of region to teleport agent to + position in destination sim to teleport to + direction in destination sim agent will look at + true on success, false on failure + This call is blocking + + + + Request teleport to a another simulator + + handle of region to teleport agent to + position in destination sim to teleport to + + + + Request teleport to a another simulator + + handle of region to teleport agent to + position in destination sim to teleport to + direction in destination sim agent will look at + + + + Teleport agent to a landmark + + of the landmark to teleport agent to + + + + Send a teleport lure to another avatar with default "Join me in ..." invitation message + + target avatars to lure + + + + Send a teleport lure to another avatar with custom invitation message + + target avatars to lure + custom message to send with invitation + + + + Respond to a teleport lure by either accepting it and initiating + the teleport, or denying it + + of the avatar sending the lure + true to accept the lure, false to decline it + + + + Update agent profile + + struct containing updated + profile information + + + + Update agents profile interests + + selection of interests from struct + + + + Set the height and the width of the client window. This is used + by the server to build a virtual camera frustum for our avatar + + New height of the viewer window + New width of the viewer window + + + + Request the list of muted objects and avatars for this agent + + + + + Sets home location to agents current position + + will fire an AlertMessage () with + success or failure message + + + + Move an agent in to a simulator. This packet is the last packet + needed to complete the transition in to a new simulator + + Object + + + + Reply to script permissions request + + Object + of the itemID requesting permissions + of the taskID requesting permissions + list of permissions to allow + + + + Respond to a group invitation by either accepting or denying it + + UUID of the group (sent in the AgentID field of the invite message) + IM Session ID from the group invitation message + Accept the group invitation or deny it + + + + Requests script detection of objects and avatars + + name of the object/avatar to search for + UUID of the object or avatar to search for + Type of search from ScriptSensorTypeFlags + range of scan (96 max?) + the arc in radians to search within + an user generated ID to correlate replies with + Simulator to perform search in + + + + Create or update profile pick + + UUID of the pick to update, or random UUID to create a new pick + Is this a top pick? (typically false) + UUID of the parcel (UUID.Zero for the current parcel) + Name of the pick + Global position of the pick landmark + UUID of the image displayed with the pick + Long description of the pick + + + + Delete profile pick + + UUID of the pick to delete + + + + Create or update profile Classified + + UUID of the classified to update, or random UUID to create a new classified + Defines what catagory the classified is in + UUID of the image displayed with the classified + Price that the classified will cost to place for a week + Global position of the classified landmark + Name of the classified + Long description of the classified + if true, auto renew classified after expiration + + + + Create or update profile Classified + + UUID of the classified to update, or random UUID to create a new classified + Defines what catagory the classified is in + UUID of the image displayed with the classified + Price that the classified will cost to place for a week + Name of the classified + Long description of the classified + if true, auto renew classified after expiration + + + + Delete a classified ad + + The classified ads ID + + + + Take an incoming ImprovedInstantMessage packet, auto-parse, and if + OnInstantMessage is defined call that with the appropriate arguments + + The sender + The EventArgs object containing the packet data + + + + Take an incoming Chat packet, auto-parse, and if OnChat is defined call + that with the appropriate arguments. + + The sender + The EventArgs object containing the packet data + + + + Used for parsing llDialogs + + The sender + The EventArgs object containing the packet data + + + + Used for parsing llRequestPermissions dialogs + + The sender + The EventArgs object containing the packet data + + + + Handles Script Control changes when Script with permissions releases or takes a control + + The sender + The EventArgs object containing the packet data + + + + Used for parsing llLoadURL Dialogs + + The sender + The EventArgs object containing the packet data + + + + Update client's Position, LookAt and region handle from incoming packet + + The sender + The EventArgs object containing the packet data + This occurs when after an avatar moves into a new sim + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + + Process TeleportFailed message sent via EventQueue, informs agent its last teleport has failed and why. + + The Message Key + An IMessage object Deserialized from the recieved message event + The simulator originating the event message + + + + Process TeleportFinish from Event Queue and pass it onto our TeleportHandler + + The message system key for this event + IMessage object containing decoded data from OSD + The simulator originating the event message + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + + Crossed region handler for message that comes across the EventQueue. Sent to an agent + when the agent crosses a sim border into a new region. + + The message key + the IMessage object containing the deserialized data sent from the simulator + The which originated the packet + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + This packet is now being sent via the EventQueue + + + + Group Chat event handler + + The capability Key + IMessage object containing decoded data from OSD + + + + + Response from request to join a group chat + + + IMessage object containing decoded data from OSD + + + + + Someone joined or left group chat + + + IMessage object containing decoded data from OSD + + + + + Handle a group chat Invitation + + Caps Key + IMessage object containing decoded data from OSD + Originating Simulator + + + + Moderate a chat session + + the of the session to moderate, for group chats this will be the groups UUID + the of the avatar to moderate + Either "voice" to moderate users voice, or "text" to moderate users text session + true to moderate (silence user), false to allow avatar to speak + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Raised when a scripted object or agent within range sends a public message + + + Raised when a scripted object sends a dialog box containing possible + options an agent can respond to + + + Raised when an object requests a change in the permissions an agent has permitted + + + Raised when a script requests an agent open the specified URL + + + Raised when an agents currency balance is updated + + + Raised when a transaction occurs involving currency such as a land purchase + + + Raised when an ImprovedInstantMessage packet is recieved from the simulator, this is used for everything from + private messaging to friendship offers. The Dialog field defines what type of message has arrived + + + Raised when an agent has requested a teleport to another location, or when responding to a lure. Raised multiple times + for each teleport indicating the progress of the request + + + Raised when a simulator sends agent specific information for our avatar. + + + Raised when our agents animation playlist changes + + + Raised when an object or avatar forcefully collides with our agent + + + Raised when our agent crosses a region border into another region + + + Raised when our agent succeeds or fails to join a group chat session + + + Raised when our agent exits a group chat session + + + Raised when a simulator sends an urgent message usually indication the recent failure of + another action we have attempted to take such as an attempt to enter a parcel where we are denied access + + + Raised when a script attempts to take or release specified controls for our agent + + + Raised when the simulator detects our agent is trying to view something + beyond its limits + + + Raised when a script sensor reply is received from a simulator + + + Raised in response to a request + + + Raised when an avatar enters a group chat session we are participating in + + + Raised when an agent exits a group chat session we are participating in + + + Your (client) avatars + "client", "agent", and "avatar" all represent the same thing + + + Temporary assigned to this session, used for + verifying our identity in packets + + + Shared secret that is never sent over the wire + + + Your (client) avatar ID, local to the current region/sim + + + Where the avatar started at login. Can be "last", "home" + or a login + + + The access level of this agent, usually M or PG + + + The CollisionPlane of Agent + + + An representing the velocity of our agent + + + An representing the acceleration of our agent + + + A which specifies the angular speed, and axis about which an Avatar is rotating. + + + Position avatar client will goto when login to 'home' or during + teleport request to 'home' region. + + + LookAt point saved/restored with HomePosition + + + Avatar First Name (i.e. Philip) + + + Avatar Last Name (i.e. Linden) + + + Avatar Full Name (i.e. Philip Linden) + + + Gets the health of the agent + + + Gets the current balance of the agent + + + Gets the local ID of the prim the agent is sitting on, + zero if the avatar is not currently sitting + + + Gets the of the agents active group. + + + Gets the Agents powers in the currently active group + + + Current status message for teleporting + + + Current position of the agent as a relative offset from + the simulator, or the parent object if we are sitting on something + + + Current rotation of the agent as a relative rotation from + the simulator, or the parent object if we are sitting on something + + + Current position of the agent in the simulator + + + + A representing the agents current rotation + + + + Returns the global grid position of the avatar + + + + Agent movement and camera control + + Agent movement is controlled by setting specific + After the control flags are set, An AgentUpdate is required to update the simulator of the specified flags + This is most easily accomplished by setting one or more of the AgentMovement properties + + Movement of an avatar is always based on a compass direction, for example AtPos will move the + agent from West to East or forward on the X Axis, AtNeg will of course move agent from + East to West or backward on the X Axis, LeftPos will be South to North or forward on the Y Axis + The Z axis is Up, finer grained control of movements can be done using the Nudge properties + + + + Agent camera controls + + + Currently only used for hiding your group title + + + Action state of the avatar, which can currently be + typing and editing + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Timer for sending AgentUpdate packets + + + Default constructor + + + + Send an AgentUpdate with the camera set at the current agent + position and pointing towards the heading specified + + Camera rotation in radians + Whether to send the AgentUpdate reliable + or not + + + + Rotates the avatar body and camera toward a target position. + This will also anchor the camera position on the avatar + + Region coordinates to turn toward + + + + Send new AgentUpdate packet to update our current camera + position and rotation + + + + + Send new AgentUpdate packet to update our current camera + position and rotation + + Whether to require server acknowledgement + of this packet + + + + Send new AgentUpdate packet to update our current camera + position and rotation + + Whether to require server acknowledgement + of this packet + Simulator to send the update to + + + + Builds an AgentUpdate packet entirely from parameters. This + will not touch the state of Self.Movement or + Self.Movement.Camera in any way + + + + + + + + + + + + + + + Move agent positive along the X axis + + + Move agent negative along the X axis + + + Move agent positive along the Y axis + + + Move agent negative along the Y axis + + + Move agent positive along the Z axis + + + Move agent negative along the Z axis + + + + + + + + + + + + + + + + + + + + + + + + Causes simulator to make agent fly + + + Stop movement + + + Finish animation + + + Stand up from a sit + + + Tells simulator to sit agent on ground + + + Place agent into mouselook mode + + + Nudge agent positive along the X axis + + + Nudge agent negative along the X axis + + + Nudge agent positive along the Y axis + + + Nudge agent negative along the Y axis + + + Nudge agent positive along the Z axis + + + Nudge agent negative along the Z axis + + + + + + + + + Tell simulator to mark agent as away + + + + + + + + + + + + + + + + Returns "always run" value, or changes it by sending a SetAlwaysRunPacket + + + + The current value of the agent control flags + + + Gets or sets the interval in milliseconds at which + AgentUpdate packets are sent to the current simulator. Setting + this to a non-zero value will also enable the packet sending if + it was previously off, and setting it to zero will disable + + + Gets or sets whether AgentUpdate packets are sent to + the current simulator + + + Reset movement controls every time we send an update + + + + Camera controls for the agent, mostly a thin wrapper around + CoordinateFrame. This class is only responsible for state + tracking and math, it does not send any packets + + + + + + + The camera is a local frame of reference inside of + the larger grid space. This is where the math happens + + + + Default constructor + + + + + + + + + + + + + + + + + Used to specify movement actions for your agent + + + + Empty flag + + + Move Forward (SL Keybinding: W/Up Arrow) + + + Move Backward (SL Keybinding: S/Down Arrow) + + + Move Left (SL Keybinding: Shift-(A/Left Arrow)) + + + Move Right (SL Keybinding: Shift-(D/Right Arrow)) + + + Not Flying: Jump/Flying: Move Up (SL Keybinding: E) + + + Not Flying: Croutch/Flying: Move Down (SL Keybinding: C) + + + Unused + + + Unused + + + Unused + + + Unused + + + ORed with AGENT_CONTROL_AT_* if the keyboard is being used + + + ORed with AGENT_CONTROL_LEFT_* if the keyboard is being used + + + ORed with AGENT_CONTROL_UP_* if the keyboard is being used + + + Fly + + + + + + Finish our current animation + + + Stand up from the ground or a prim seat + + + Sit on the ground at our current location + + + Whether mouselook is currently enabled + + + Legacy, used if a key was pressed for less than a certain amount of time + + + Legacy, used if a key was pressed for less than a certain amount of time + + + Legacy, used if a key was pressed for less than a certain amount of time + + + Legacy, used if a key was pressed for less than a certain amount of time + + + Legacy, used if a key was pressed for less than a certain amount of time + + + Legacy, used if a key was pressed for less than a certain amount of time + + + + + + + + + Set when the avatar is idled or set to away. Note that the away animation is + activated separately from setting this flag + + + + + + + + + + + + + + + + Represents a single Voice Session to the Vivox service. + + + + + Close this session. + + + + + Look up an existing Participants in this session + + + + + + Positional vector of the users position + + + Velocity vector of the position + + + At Orientation (X axis) of the position + + + Up Orientation (Y axis) of the position + + + Left Orientation (Z axis) of the position + + + + The type of bump-mapping applied to a face + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + The level of shininess applied to a face + + + + + + + + + + + + + + + + + The texture mapping style used for a face + + + + + + + + + + + Flags in the TextureEntry block that describe which properties are + set + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Abstract base for rendering plugins + + + + + Generates a basic mesh structure from a primitive + + Primitive to generate the mesh from + Level of detail to generate the mesh at + The generated mesh + + + + Generates a a series of faces, each face containing a mesh and + metadata + + Primitive to generate the mesh from + Level of detail to generate the mesh at + The generated mesh + + + + Apply texture coordinate modifications from a + to a list of vertices + + Vertex list to modify texture coordinates for + Center-point of the face + Face texture parameters + + + + Temporary code to produce a tar archive in tar v7 format + + + + + Binary writer for the underlying stream + + + + + Write a directory entry to the tar archive. We can only handle one path level right now! + + + + + + Write a file to the tar archive + + + + + + + Write a file to the tar archive + + + + + + + Finish writing the raw tar archive data to a stream. The stream will be closed on completion. + + + + + Write a particular entry + + + + + + + + Temporary code to do the bare minimum required to read a tar archive for our purposes + + + + + Binary reader for the underlying stream + + + + + Used to trim off null chars + + + + + Used to trim off space chars + + + + + Generate a tar reader which reads from the given stream. + + + + + + Read the next entry in the tar file. + + + + the data for the entry. Returns null if there are no more entries + + + + Read the next 512 byte chunk of data as a tar header. + + A tar header struct. null if we have reached the end of the archive. + + + + Read data following a header + + + + + + + Convert octal bytes to a decimal representation + + + + + + + + + Simulator (region) properties + + + + No flags set + + + Agents can take damage and be killed + + + Landmarks can be created here + + + Home position can be set in this sim + + + Home position is reset when an agent teleports away + + + Sun does not move + + + No object, land, etc. taxes + + + Disable heightmap alterations (agents can still plant + foliage) + + + Land cannot be released, sold, or purchased + + + All content is wiped nightly + + + Unknown: Related to the availability of an overview world map tile.(Think mainland images when zoomed out.) + + + Unknown: Related to region debug flags. Possibly to skip processing of agent interaction with world. + + + Region does not update agent prim interest lists. Internal debugging option. + + + No collision detection for non-agent objects + + + No scripts are ran + + + All physics processing is turned off + + + Region can be seen from other regions on world map. (Legacy world map option?) + + + Region can be seen from mainland on world map. (Legacy world map option?) + + + Agents not explicitly on the access list can visit the region. + + + Traffic calculations are not run across entire region, overrides parcel settings. + + + Flight is disabled (not currently enforced by the sim) + + + Allow direct (p2p) teleporting + + + Estate owner has temporarily disabled scripting + + + Restricts the usage of the LSL llPushObject function, applies to whole region. + + + Deny agents with no payment info on file + + + Deny agents with payment info on file + + + Deny agents who have made a monetary transaction + + + Parcels within the region may be joined or divided by anyone, not just estate owners/managers. + + + Abuse reports sent from within this region are sent to the estate owner defined email. + + + Region is Voice Enabled + + + Removes the ability from parcel owners to set their parcels to show in search. + + + Deny agents who have not been age verified from entering the region. + + + + Access level for a simulator + + + + Minimum access level, no additional checks + + + Trial accounts allowed + + + PG rating + + + Mature rating + + + Simulator is offline + + + Simulator does not exist + + + + + + + + + + + + + + Initialize the UDP packet handler in server mode + + Port to listening for incoming UDP packets on + + + + Initialize the UDP packet handler in client mode + + Remote UDP server to connect to + + + + + + + + + + + + + + + + + + A public reference to the client that this Simulator object + is attached to + + + A Unique Cache identifier for this simulator + + + The capabilities for this simulator + + + + + + The current version of software this simulator is running + + + + + + A 64x64 grid of parcel coloring values. The values stored + in this array are of the type + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + true if your agent has Estate Manager rights on this region + + + + + + + + + + + + Statistics information for this simulator and the + connection to the simulator, calculated by the simulator itself + and the library + + + The regions Unique ID + + + The physical data center the simulator is located + Known values are: + + Dallas + Chandler + SF + + + + + The CPU Class of the simulator + Most full mainland/estate sims appear to be 5, + Homesteads and Openspace appear to be 501 + + + The number of regions sharing the same CPU as this one + "Full Sims" appear to be 1, Homesteads appear to be 4 + + + The billing product name + Known values are: + + Mainland / Full Region (Sku: 023) + Estate / Full Region (Sku: 024) + Estate / Openspace (Sku: 027) + Estate / Homestead (Sku: 029) + Mainland / Homestead (Sku: 129) (Linden Owned) + Mainland / Linden Homes (Sku: 131) + + + + + The billing product SKU + Known values are: + + 023 Mainland / Full Region + 024 Estate / Full Region + 027 Estate / Openspace + 029 Estate / Homestead + 129 Mainland / Homestead (Linden Owned) + 131 Linden Homes / Full Region + + + + + + A thread-safe dictionary containing avatars in a simulator + + + + + A thread-safe dictionary containing primitives in a simulator + + + + The current sequence number for packets sent to this + simulator. Must be Interlocked before modifying. Only + useful for applications manipulating sequence numbers + + + + Provides access to an internal thread-safe dictionary containing parcel + information found in this simulator + + + + + Checks simulator parcel map to make sure it has downloaded all data successfully + + true if map is full (contains no 0's) + + + Used internally to track sim disconnections + + + Event that is triggered when the simulator successfully + establishes a connection + + + Whether this sim is currently connected or not. Hooked up + to the property Connected + + + Coarse locations of avatars in this simulator + + + AvatarPositions key representing TrackAgent target + + + Sequence numbers of packets we've received + (for duplicate checking) + + + Packets we sent out that need ACKs from the simulator + + + Sequence number for pause/resume + + + + + + Reference to the GridClient object + IPEndPoint of the simulator + handle of the simulator + + + + Called when this Simulator object is being destroyed + + + + + Attempt to connect to this simulator + + Whether to move our agent in to this sim or not + True if the connection succeeded or connection status is + unknown, false if there was a failure + + + + Disconnect from this simulator + + + + + Instructs the simulator to stop sending update (and possibly other) packets + + + + + Instructs the simulator to resume sending update packets (unpause) + + + + + Sends a packet + + Packet to be sent + + + + + + + + + Returns Simulator Name as a String + + + + + + + + + + + + + + + + + + + Sends out pending acknowledgements + + + + + Resend unacknowledged packets + + + + + Provides access to an internal thread-safe multidimensional array containing a x,y grid mapped + to each 64x64 parcel's LocalID. + + + + The IP address and port of the server + + + Whether there is a working connection to the simulator or + not + + + Coarse locations of avatars in this simulator + + + AvatarPositions key representing TrackAgent target + + + + Simulator Statistics + + + + Total number of packets sent by this simulator to this agent + + + Total number of packets received by this simulator to this agent + + + Total number of bytes sent by this simulator to this agent + + + Total number of bytes received by this simulator to this agent + + + Time in seconds agent has been connected to simulator + + + Total number of packets that have been resent + + + Total number of resent packets recieved + + + Total number of pings sent to this simulator by this agent + + + Total number of ping replies sent to this agent by this simulator + + + + Incoming bytes per second + + It would be nice to have this claculated on the fly, but + this is far, far easier + + + + Outgoing bytes per second + + It would be nice to have this claculated on the fly, but + this is far, far easier + + + Time last ping was sent + + + ID of last Ping sent + + + + + + + + + Current time dilation of this simulator + + + Current Frames per second of simulator + + + Current Physics frames per second of simulator + + + + + + + + + + + + + + + + + + + + + + + + + + + Total number of objects Simulator is simulating + + + Total number of Active (Scripted) objects running + + + Number of agents currently in this simulator + + + Number of agents in neighbor simulators + + + Number of Active scripts running in this simulator + + + + + + + + + + + + Number of downloads pending + + + Number of uploads pending + + + + + + + + + Number of local uploads pending + + + Unacknowledged bytes in queue + + + + + + + + No report + + + Unknown report type + + + Bug report + + + Complaint report + + + Customer service report + + + + Bitflag field for ObjectUpdateCompressed data blocks, describing + which options are present for each object + + + + Unknown + + + Whether the object has a TreeSpecies + + + Whether the object has floating text ala llSetText + + + Whether the object has an active particle system + + + Whether the object has sound attached to it + + + Whether the object is attached to a root object or not + + + Whether the object has texture animation settings + + + Whether the object has an angular velocity + + + Whether the object has a name value pairs string + + + Whether the object has a Media URL set + + + + Specific Flags for MultipleObjectUpdate requests + + + + None + + + Change position of prims + + + Change rotation of prims + + + Change size of prims + + + Perform operation on link set + + + Scale prims uniformly, same as selecing ctrl+shift in the + viewer. Used in conjunction with Scale + + + + Special values in PayPriceReply. If the price is not one of these + literal value of the price should be use + + + + + Indicates that this pay option should be hidden + + + + + Indicates that this pay option should have the default value + + + + + Contains the variables sent in an object update packet for objects. + Used to track position and movement of prims and avatars + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Handles all network traffic related to prims and avatar positions and + movement. + + + + The event subscribers, null of no subscribers + + + Raises the ObjectUpdate Event + A ObjectUpdateEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the ObjectProperties Event + A ObjectPropertiesEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the ObjectPropertiesUpdated Event + A ObjectPropertiesUpdatedEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the ObjectPropertiesFamily Event + A ObjectPropertiesFamilyEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the AvatarUpdate Event + A AvatarUpdateEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the TerseObjectUpdate Event + A TerseObjectUpdateEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the ObjectDataBlockUpdate Event + A ObjectDataBlockUpdateEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the KillObject Event + A KillObjectEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the AvatarSitChanged Event + A AvatarSitChangedEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the PayPriceReply Event + A PayPriceReplyEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + Reference to the GridClient object + + + Does periodic dead reckoning calculation to convert + velocity and acceleration to new positions for objects + + + + Construct a new instance of the ObjectManager class + + A reference to the instance + + + + Request information for a single object from a + you are currently connected to + + The the object is located + The Local ID of the object + + + + Request information for multiple objects contained in + the same simulator + + The the objects are located + An array containing the Local IDs of the objects + + + + Attempt to purchase an original object, a copy, or the contents of + an object + + The the object is located + The Local ID of the object + Whether the original, a copy, or the object + contents are on sale. This is used for verification, if the this + sale type is not valid for the object the purchase will fail + Price of the object. This is used for + verification, if it does not match the actual price the purchase + will fail + Group ID that will be associated with the new + purchase + Inventory folder UUID where the object or objects + purchased should be placed + + + BuyObject(Client.Network.CurrentSim, 500, SaleType.Copy, + 100, UUID.Zero, Client.Self.InventoryRootFolderUUID); + + + + + + Request prices that should be displayed in pay dialog. This will triggger the simulator + to send us back a PayPriceReply which can be handled by OnPayPriceReply event + + The the object is located + The ID of the object + The result is raised in the event + + + + Select a single object. This will cause the to send us + an which will raise the event + + The the object is located + The Local ID of the object + + + + + Select a single object. This will cause the to send us + an which will raise the event + + The the object is located + The Local ID of the object + if true, a call to is + made immediately following the request + + + + + Select multiple objects. This will cause the to send us + an which will raise the event + + The the objects are located + An array containing the Local IDs of the objects + Should objects be deselected immediately after selection + + + + + Select multiple objects. This will cause the to send us + an which will raise the event + + The the objects are located + An array containing the Local IDs of the objects + + + + + Update the properties of an object + + The the object is located + The Local ID of the object + true to turn the objects physical property on + true to turn the objects temporary property on + true to turn the objects phantom property on + true to turn the objects cast shadows property on + + + + Sets the sale properties of a single object + + The the object is located + The Local ID of the object + One of the options from the enum + The price of the object + + + + Sets the sale properties of multiple objects + + The the objects are located + An array containing the Local IDs of the objects + One of the options from the enum + The price of the object + + + + Deselect a single object + + The the object is located + The Local ID of the object + + + + Deselect multiple objects. + + The the objects are located + An array containing the Local IDs of the objects + + + + Perform a click action on an object + + The the object is located + The Local ID of the object + + + + Perform a click action (Grab) on a single object + + The the object is located + The Local ID of the object + The texture coordinates to touch + The surface coordinates to touch + The face of the position to touch + The region coordinates of the position to touch + The surface normal of the position to touch (A normal is a vector perpindicular to the surface) + The surface binormal of the position to touch (A binormal is a vector tangen to the surface + pointing along the U direction of the tangent space + + + + Create (rez) a new prim object in a simulator + + A reference to the object to place the object in + Data describing the prim object to rez + Group ID that this prim will be set to, or UUID.Zero if you + do not want the object to be associated with a specific group + An approximation of the position at which to rez the prim + Scale vector to size this prim + Rotation quaternion to rotate this prim + Due to the way client prim rezzing is done on the server, + the requested position for an object is only close to where the prim + actually ends up. If you desire exact placement you'll need to + follow up by moving the object after it has been created. This + function will not set textures, light and flexible data, or other + extended primitive properties + + + + Create (rez) a new prim object in a simulator + + A reference to the object to place the object in + Data describing the prim object to rez + Group ID that this prim will be set to, or UUID.Zero if you + do not want the object to be associated with a specific group + An approximation of the position at which to rez the prim + Scale vector to size this prim + Rotation quaternion to rotate this prim + Specify the + Due to the way client prim rezzing is done on the server, + the requested position for an object is only close to where the prim + actually ends up. If you desire exact placement you'll need to + follow up by moving the object after it has been created. This + function will not set textures, light and flexible data, or other + extended primitive properties + + + + Rez a Linden tree + + A reference to the object where the object resides + The size of the tree + The rotation of the tree + The position of the tree + The Type of tree + The of the group to set the tree to, + or UUID.Zero if no group is to be set + true to use the "new" Linden trees, false to use the old + + + + Rez grass and ground cover + + A reference to the object where the object resides + The size of the grass + The rotation of the grass + The position of the grass + The type of grass from the enum + The of the group to set the tree to, + or UUID.Zero if no group is to be set + + + + Set the textures to apply to the faces of an object + + A reference to the object where the object resides + The objects ID which is local to the simulator the object is in + The texture data to apply + + + + Set the textures to apply to the faces of an object + + A reference to the object where the object resides + The objects ID which is local to the simulator the object is in + The texture data to apply + A media URL (not used) + + + + Set the Light data on an object + + A reference to the object where the object resides + The objects ID which is local to the simulator the object is in + A object containing the data to set + + + + Set the flexible data on an object + + A reference to the object where the object resides + The objects ID which is local to the simulator the object is in + A object containing the data to set + + + + Set the sculptie texture and data on an object + + A reference to the object where the object resides + The objects ID which is local to the simulator the object is in + A object containing the data to set + + + + Unset additional primitive parameters on an object + + A reference to the object where the object resides + The objects ID which is local to the simulator the object is in + The extra parameters to set + + + + Link multiple prims into a linkset + + A reference to the object where the objects reside + An array which contains the IDs of the objects to link + The last object in the array will be the root object of the linkset TODO: Is this true? + + + + Change the rotation of an object + + A reference to the object where the object resides + The objects ID which is local to the simulator the object is in + The new rotation of the object + + + + Set the name of an object + + A reference to the object where the object resides + The objects ID which is local to the simulator the object is in + A string containing the new name of the object + + + + Set the name of multiple objects + + A reference to the object where the objects reside + An array which contains the IDs of the objects to change the name of + An array which contains the new names of the objects + + + + Set the description of an object + + A reference to the object where the object resides + The objects ID which is local to the simulator the object is in + A string containing the new description of the object + + + + Set the descriptions of multiple objects + + A reference to the object where the objects reside + An array which contains the IDs of the objects to change the description of + An array which contains the new descriptions of the objects + + + + Attach an object to this avatar + + A reference to the object where the object resides + The objects ID which is local to the simulator the object is in + The point on the avatar the object will be attached + The rotation of the attached object + + + + Drop an attached object from this avatar + + A reference to the + object where the objects reside. This will always be the simulator the avatar is currently in + + The object's ID which is local to the simulator the object is in + + + + Detach an object from yourself + + A reference to the + object where the objects reside + + This will always be the simulator the avatar is currently in + + An array which contains the IDs of the objects to detach + + + + Change the position of an object, Will change position of entire linkset + + A reference to the object where the object resides + The objects ID which is local to the simulator the object is in + The new position of the object + + + + Change the position of an object + + A reference to the object where the object resides + The objects ID which is local to the simulator the object is in + The new position of the object + if true, will change position of (this) child prim only, not entire linkset + + + + Change the Scale (size) of an object + + A reference to the object where the object resides + The objects ID which is local to the simulator the object is in + The new scale of the object + If true, will change scale of this prim only, not entire linkset + True to resize prims uniformly + + + + Change the Rotation of an object that is either a child or a whole linkset + + A reference to the object where the object resides + The objects ID which is local to the simulator the object is in + The new scale of the object + If true, will change rotation of this prim only, not entire linkset + + + + Send a Multiple Object Update packet to change the size, scale or rotation of a primitive + + A reference to the object where the object resides + The objects ID which is local to the simulator the object is in + The new rotation, size, or position of the target object + The flags from the Enum + + + + Deed an object (prim) to a group, Object must be shared with group which + can be accomplished with SetPermissions() + + A reference to the object where the object resides + The objects ID which is local to the simulator the object is in + The of the group to deed the object to + + + + Deed multiple objects (prims) to a group, Objects must be shared with group which + can be accomplished with SetPermissions() + + A reference to the object where the object resides + An array which contains the IDs of the objects to deed + The of the group to deed the object to + + + + Set the permissions on multiple objects + + A reference to the object where the objects reside + An array which contains the IDs of the objects to set the permissions on + The new Who mask to set + The new Permissions mark to set + TODO: What does this do? + + + + Request additional properties for an object + + A reference to the object where the object resides + + + + + Request additional properties for an object + + A reference to the object where the object resides + Absolute UUID of the object + Whether to require server acknowledgement of this request + + + + Set the ownership of a list of objects to the specified group + + A reference to the object where the objects reside + An array which contains the IDs of the objects to set the group id on + The Groups ID + + + + Update current URL of the previously set prim media + + UUID of the prim + Set current URL to this + Prim face number + Simulator in which prim is located + + + + Set object media + + UUID of the prim + Array the length of prims number of faces. Null on face indexes where there is + no media, on faces which contain the media + Simulatior in which prim is located + + + + Retrieve information about object media + + UUID of the primitive + Simulator where prim is located + Call this callback when done + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + + A terse object update, used when a transformation matrix or + velocity/acceleration for an object changes but nothing else + (scale/position/rotation/acceleration/velocity) + + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + + Setup construction data for a basic primitive shape + + Primitive shape to construct + Construction data that can be plugged into a + + + + + + + + + + + + + + + + + + + + Set the Shape data of an object + + A reference to the object where the object resides + The objects ID which is local to the simulator the object is in + Data describing the prim shape + + + + Set the Material data of an object + + A reference to the object where the object resides + The objects ID which is local to the simulator the object is in + The new material of the object + + + + + + + + + + + + + + + + + + + + + Raised when the simulator sends us data containing + A , Foliage or Attachment + + + + + Raised when the simulator sends us data containing + additional information + + + + + Raised when the simulator sends us data containing + Primitive.ObjectProperties for an object we are currently tracking + + + Raised when the simulator sends us data containing + additional and details + + + + Raised when the simulator sends us data containing + updated information for an + + + Raised when the simulator sends us data containing + and movement changes + + + Raised when the simulator sends us data containing + updates to an Objects DataBlock + + + Raised when the simulator informs us an + or is no longer within view + + + Raised when the simulator sends us data containing + updated sit information for our + + + Raised when the simulator sends us data containing + purchase price information for a + + + + Callback for getting object media data via CAP + + Indicates if the operation was succesfull + Object media version string + Array indexed on prim face of media entry data + + + Provides data for the event + The event occurs when the simulator sends + an containing a Primitive, Foliage or Attachment data + Note 1: The event will not be raised when the object is an Avatar + Note 2: It is possible for the to be + raised twice for the same object if for example the primitive moved to a new simulator, then returned to the current simulator or + if an Avatar crosses the border into a new simulator and returns to the current simulator + + + The following code example uses the , , and + properties to display new Primitives and Attachments on the window. + + // Subscribe to the event that gives us prim and foliage information + Client.Objects.ObjectUpdate += Objects_ObjectUpdate; + + + private void Objects_ObjectUpdate(object sender, PrimEventArgs e) + { + Console.WriteLine("Primitive {0} {1} in {2} is an attachment {3}", e.Prim.ID, e.Prim.LocalID, e.Simulator.Name, e.IsAttachment); + } + + + + + + + + + Construct a new instance of the PrimEventArgs class + + The simulator the object originated from + The Primitive + The simulator time dilation + The prim was not in the dictionary before this update + true if the primitive represents an attachment to an agent + + + Get the simulator the originated from + + + Get the details + + + true if the did not exist in the dictionary before this update (always true if object tracking has been disabled) + + + true if the is attached to an + + + Get the simulator Time Dilation + + + Provides data for the event + The event occurs when the simulator sends + an containing Avatar data + Note 1: The event will not be raised when the object is an Avatar + Note 2: It is possible for the to be + raised twice for the same avatar if for example the avatar moved to a new simulator, then returned to the current simulator + + + The following code example uses the property to make a request for the top picks + using the method in the class to display the names + of our own agents picks listings on the window. + + // subscribe to the AvatarUpdate event to get our information + Client.Objects.AvatarUpdate += Objects_AvatarUpdate; + Client.Avatars.AvatarPicksReply += Avatars_AvatarPicksReply; + + private void Objects_AvatarUpdate(object sender, AvatarUpdateEventArgs e) + { + // we only want our own data + if (e.Avatar.LocalID == Client.Self.LocalID) + { + // Unsubscribe from the avatar update event to prevent a loop + // where we continually request the picks every time we get an update for ourselves + Client.Objects.AvatarUpdate -= Objects_AvatarUpdate; + // make the top picks request through AvatarManager + Client.Avatars.RequestAvatarPicks(e.Avatar.ID); + } + } + + private void Avatars_AvatarPicksReply(object sender, AvatarPicksReplyEventArgs e) + { + // we'll unsubscribe from the AvatarPicksReply event since we now have the data + // we were looking for + Client.Avatars.AvatarPicksReply -= Avatars_AvatarPicksReply; + // loop through the dictionary and extract the names of the top picks from our profile + foreach (var pickName in e.Picks.Values) + { + Console.WriteLine(pickName); + } + } + + + + + + + + Construct a new instance of the AvatarUpdateEventArgs class + + The simulator the packet originated from + The data + The simulator time dilation + The avatar was not in the dictionary before this update + + + Get the simulator the object originated from + + + Get the data + + + Get the simulator time dilation + + + true if the did not exist in the dictionary before this update (always true if avatar tracking has been disabled) + + + Provides additional primitive data for the event + The event occurs when the simulator sends + an containing additional details for a Primitive, Foliage data or Attachment data + The event is also raised when a request is + made. + + + The following code example uses the , and + + properties to display new attachments and send a request for additional properties containing the name of the + attachment then display it on the window. + + // Subscribe to the event that provides additional primitive details + Client.Objects.ObjectProperties += Objects_ObjectProperties; + + // handle the properties data that arrives + private void Objects_ObjectProperties(object sender, ObjectPropertiesEventArgs e) + { + Console.WriteLine("Primitive Properties: {0} Name is {1}", e.Properties.ObjectID, e.Properties.Name); + } + + + + + + Construct a new instance of the ObjectPropertiesEventArgs class + + The simulator the object is located + The primitive Properties + + + Get the simulator the object is located + + + Get the primitive properties + + + Provides additional primitive data for the event + The event occurs when the simulator sends + an containing additional details for a Primitive or Foliage data that is currently + being tracked in the dictionary + The event is also raised when a request is + made and is enabled + + + + + Construct a new instance of the ObjectPropertiesUpdatedEvenrArgs class + + The simulator the object is located + The Primitive + The primitive Properties + + + Get the simulator the object is located + + + Get the primitive details + + + Get the primitive properties + + + Provides additional primitive data, permissions and sale info for the event + The event occurs when the simulator sends + an containing additional details for a Primitive, Foliage data or Attachment. This includes + Permissions, Sale info, and other basic details on an object + The event is also raised when a request is + made, the viewer equivalent is hovering the mouse cursor over an object + + + + Get the simulator the object is located + + + + + + + + + Provides primitive data containing updated location, velocity, rotation, textures for the event + The event occurs when the simulator sends updated location, velocity, rotation, etc + + + + Get the simulator the object is located + + + Get the primitive details + + + + + + + + + + + + + + Get the simulator the object is located + + + Get the primitive details + + + + + + + + + + + + + + + Provides notification when an Avatar, Object or Attachment is DeRezzed or moves out of the avatars view for the + event + + + Get the simulator the object is located + + + The LocalID of the object + + + + Provides updates sit position data + + + + Get the simulator the object is located + + + + + + + + + + + + + + + + + Get the simulator the object is located + + + + + + + + + + + + + Indicates if the operation was successful + + + + + Media version string + + + + + Array of media entries indexed by face number + + + + + Singleton logging class for the entire library + + + + log4net logging engine + + + + Default constructor + + + + + Send a log message to the logging engine + + The log message + The severity of the log entry + + + + Send a log message to the logging engine + + The log message + The severity of the log entry + Instance of the client + + + + Send a log message to the logging engine + + The log message + The severity of the log entry + Exception that was raised + + + + Send a log message to the logging engine + + The log message + The severity of the log entry + Instance of the client + Exception that was raised + + + + If the library is compiled with DEBUG defined, an event will be + fired if an OnLogMessage handler is registered and the + message will be sent to the logging engine + + The message to log at the DEBUG level to the + current logging engine + + + + If the library is compiled with DEBUG defined and + GridClient.Settings.DEBUG is true, an event will be + fired if an OnLogMessage handler is registered and the + message will be sent to the logging engine + + The message to log at the DEBUG level to the + current logging engine + Instance of the client + + + Triggered whenever a message is logged. If this is left + null, log messages will go to the console + + + + Callback used for client apps to receive log messages from + the library + + Data being logged + The severity of the log entry from + + + + + + + + + + + + + + + De-serialization constructor for the InventoryNode Class + + + + + Serialization handler for the InventoryNode Class + + + + + De-serialization handler for the InventoryNode Class + + + + + + + + + + + + + + + + + + + + + + + For inventory folder nodes specifies weather the folder needs to be + refreshed from the server + + + + + Exception class to identify inventory exceptions + + + + + Responsible for maintaining inventory structure. Inventory constructs nodes + and manages node children as is necessary to maintain a coherant hirarchy. + Other classes should not manipulate or create InventoryNodes explicitly. When + A node's parent changes (when a folder is moved, for example) simply pass + Inventory the updated InventoryFolder and it will make the appropriate changes + to its internal representation. + + + + The event subscribers, null of no subscribers + + + Raises the InventoryObjectUpdated Event + A InventoryObjectUpdatedEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the InventoryObjectRemoved Event + A InventoryObjectRemovedEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the InventoryObjectAdded Event + A InventoryObjectAddedEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + + Returns the contents of the specified folder + + A folder's UUID + The contents of the folder corresponding to folder + When folder does not exist in the inventory + + + + Updates the state of the InventoryNode and inventory data structure that + is responsible for the InventoryObject. If the item was previously not added to inventory, + it adds the item, and updates structure accordingly. If it was, it updates the + InventoryNode, changing the parent node if item.parentUUID does + not match node.Parent.Data.UUID. + + You can not set the inventory root folder using this method + + The InventoryObject to store + + + + Removes the InventoryObject and all related node data from Inventory. + + The InventoryObject to remove. + + + + Used to find out if Inventory contains the InventoryObject + specified by uuid. + + The UUID to check. + true if inventory contains uuid, false otherwise + + + + Saves the current inventory structure to a cache file + + Name of the cache file to save to + + + + Loads in inventory cache file into the inventory structure. Note only valid to call after login has been successful. + + Name of the cache file to load + The number of inventory items sucessfully reconstructed into the inventory node tree + + + Raised when the simulator sends us data containing + ... + + + Raised when the simulator sends us data containing + ... + + + Raised when the simulator sends us data containing + ... + + + + The root folder of this avatars inventory + + + + + The default shared library folder + + + + + The root node of the avatars inventory + + + + + The root node of the default shared library + + + + + By using the bracket operator on this class, the program can get the + InventoryObject designated by the specified uuid. If the value for the corresponding + UUID is null, the call is equivelant to a call to RemoveNodeFor(this[uuid]). + If the value is non-null, it is equivelant to a call to UpdateNodeFor(value), + the uuid parameter is ignored. + + The UUID of the InventoryObject to get or set, ignored if set to non-null value. + The InventoryObject corresponding to uuid. + + + Describes tasks returned in LandStatReply + + + + Estate level administration and utilities + + + + Textures for each of the four terrain height levels + + + Upper/lower texture boundaries for each corner of the sim + + + + Constructor for EstateTools class + + + + + The event subscribers. null if no subcribers + + + Raises the TopCollidersReply event + A TopCollidersReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the TopScriptsReply event + A TopScriptsReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the EstateUsersReply event + A EstateUsersReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the EstateGroupsReply event + A EstateGroupsReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the EstateManagersReply event + A EstateManagersReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the EstateBansReply event + A EstateBansReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the EstateCovenantReply event + A EstateCovenantReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the EstateUpdateInfoReply event + A EstateUpdateInfoReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + + Requests estate information such as top scripts and colliders + + + + + + + + Requests estate settings, including estate manager and access/ban lists + + + Requests the "Top Scripts" list for the current region + + + Requests the "Top Colliders" list for the current region + + + + Set several estate specific configuration variables + + The Height of the waterlevel over the entire estate. Defaults to 20 + The maximum height change allowed above the baked terrain. Defaults to 4 + The minimum height change allowed below the baked terrain. Defaults to -4 + true to use + if True forces the sun position to the position in SunPosition + The current position of the sun on the estate, or when FixedSun is true the static position + the sun will remain. 6.0 = Sunrise, 30.0 = Sunset + + + + Request return of objects owned by specified avatar + + The Agents owning the primitives to return + specify the coverage and type of objects to be included in the return + true to perform return on entire estate + + + + + + + + + Used for setting and retrieving various estate panel settings + + EstateOwnerMessage Method field + List of parameters to include + + + + Kick an avatar from an estate + + Key of Agent to remove + + + + Ban an avatar from an estate + Key of Agent to remove + Ban user from this estate and all others owned by the estate owner + + + Unban an avatar from an estate + Key of Agent to remove + /// Unban user from this estate and all others owned by the estate owner + + + + Send a message dialog to everyone in an entire estate + + Message to send all users in the estate + + + + Send a message dialog to everyone in a simulator + + Message to send all users in the simulator + + + + Send an avatar back to their home location + + Key of avatar to send home + + + + Begin the region restart process + + + + + Cancels a region restart + + + + Estate panel "Region" tab settings + + + Estate panel "Debug" tab settings + + + Used for setting the region's terrain textures for its four height levels + + + + + + + Used for setting sim terrain texture heights + + + Requests the estate covenant + + + + Upload a terrain RAW file + + A byte array containing the encoded terrain data + The name of the file being uploaded + The Id of the transfer request + + + + Teleports all users home in current Estate + + + + + Remove estate manager + Key of Agent to Remove + removes manager to this estate and all others owned by the estate owner + + + + Add estate manager + Key of Agent to Add + Add agent as manager to this estate and all others owned by the estate owner + + + + Add's an agent to the estate Allowed list + Key of Agent to Add + Add agent as an allowed reisdent to All estates if true + + + + Removes an agent from the estate Allowed list + Key of Agent to Remove + Removes agent as an allowed reisdent from All estates if true + + + + + Add's a group to the estate Allowed list + Key of Group to Add + Add Group as an allowed group to All estates if true + + + + + Removes a group from the estate Allowed list + Key of Group to Remove + Removes Group as an allowed Group from All estates if true + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Raised when the data server responds to a request. + + + Raised when the data server responds to a request. + + + Raised when the data server responds to a request. + + + Raised when the data server responds to a request. + + + Raised when the data server responds to a request. + + + Raised when the data server responds to a request. + + + Raised when the data server responds to a request. + + + Raised when the data server responds to a request. + + + Used in the ReportType field of a LandStatRequest + + + Used by EstateOwnerMessage packets + + + Used by EstateOwnerMessage packets + + + + + + + + No flags set + + + Only return targets scripted objects + + + Only return targets objects if on others land + + + Returns target's scripted objects and objects on other parcels + + + Ground texture settings for each corner of the region + + + Used by GroundTextureHeightSettings + + + The high and low texture thresholds for each corner of the sim + + + Raised on LandStatReply when the report type is for "top colliders" + + + Construct a new instance of the TopCollidersReplyEventArgs class + The number of returned items in LandStatReply + Dictionary of Object UUIDs to tasks returned in LandStatReply + + + + The number of returned items in LandStatReply + + + + + A Dictionary of Object UUIDs to tasks returned in LandStatReply + + + + Raised on LandStatReply when the report type is for "top Scripts" + + + Construct a new instance of the TopScriptsReplyEventArgs class + The number of returned items in LandStatReply + Dictionary of Object UUIDs to tasks returned in LandStatReply + + + + The number of scripts returned in LandStatReply + + + + + A Dictionary of Object UUIDs to tasks returned in LandStatReply + + + + Returned, along with other info, upon a successful .RequestInfo() + + + Construct a new instance of the EstateBansReplyEventArgs class + The estate's identifier on the grid + The number of returned items in LandStatReply + User UUIDs banned + + + + The identifier of the estate + + + + + The number of returned itmes + + + + + List of UUIDs of Banned Users + + + + Returned, along with other info, upon a successful .RequestInfo() + + + Construct a new instance of the EstateUsersReplyEventArgs class + The estate's identifier on the grid + The number of users + Allowed users UUIDs + + + + The identifier of the estate + + + + + The number of returned items + + + + + List of UUIDs of Allowed Users + + + + Returned, along with other info, upon a successful .RequestInfo() + + + Construct a new instance of the EstateGroupsReplyEventArgs class + The estate's identifier on the grid + The number of Groups + Allowed Groups UUIDs + + + + The identifier of the estate + + + + + The number of returned items + + + + + List of UUIDs of Allowed Groups + + + + Returned, along with other info, upon a successful .RequestInfo() + + + Construct a new instance of the EstateManagersReplyEventArgs class + The estate's identifier on the grid + The number of Managers + Managers UUIDs + + + + The identifier of the estate + + + + + The number of returned items + + + + + List of UUIDs of the Estate's Managers + + + + Returned, along with other info, upon a successful .RequestInfo() + + + Construct a new instance of the EstateCovenantReplyEventArgs class + The Covenant ID + The timestamp + The estate's name + The Estate Owner's ID (can be a GroupID) + + + + The Covenant + + + + + The timestamp + + + + + The Estate name + + + + + The Estate Owner's ID (can be a GroupID) + + + + Returned, along with other info, upon a successful .RequestInfo() + + + Construct a new instance of the EstateUpdateInfoReplyEventArgs class + The estate's name + The Estate Owners ID (can be a GroupID) + The estate's identifier on the grid + + + + + The estate's name + + + + + The Estate Owner's ID (can be a GroupID) + + + + + The identifier of the estate on the grid + + + + + + + + Image width + + + + + Image height + + + + + Image channel flags + + + + + Red channel data + + + + + Green channel data + + + + + Blue channel data + + + + + Alpha channel data + + + + + Bump channel data + + + + + Create a new blank image + + width + height + channel flags + + + + + + + + + + Convert the channels in the image. Channels are created or destroyed as required. + + new channel flags + + + + Resize or stretch the image using nearest neighbor (ugly) resampling + + new width + new height + + + + Create a byte array containing 32-bit RGBA data with a bottom-left + origin, suitable for feeding directly into OpenGL + + A byte array containing raw texture data + + + + Represents an AssetScriptBinary object containing the + LSO compiled bytecode of an LSL script + + + + Initializes a new instance of an AssetScriptBinary object + + + Initializes a new instance of an AssetScriptBinary object with parameters + A unique specific to this asset + A byte array containing the raw asset data + + + + TODO: Encodes a scripts contents into a LSO Bytecode file + + + + + TODO: Decode LSO Bytecode into a string + + true + + + Override the base classes AssetType + + + + + + + + + An instance of DelegateWrapper which calls InvokeWrappedDelegate, + which in turn calls the DynamicInvoke method of the wrapped + delegate + + + + + Callback used to call EndInvoke on the asynchronously + invoked DelegateWrapper + + + + + Executes the specified delegate with the specified arguments + asynchronously on a thread pool thread + + + + + + + Invokes the wrapped delegate synchronously + + + + + + + Calls EndInvoke on the wrapper and Close on the resulting WaitHandle + to prevent resource leaks + + + + + + Delegate to wrap another delegate and its arguments + + + + + + + Checks the instance back into the object pool + + + + + Returns an instance of the class that has been checked out of the Object Pool. + + + + + Creates a new instance of the ObjectPoolBase class. Initialize MUST be called + after using this constructor. + + + + + Creates a new instance of the ObjectPool Base class. + + The object pool is composed of segments, which + are allocated whenever the size of the pool is exceeded. The number of items + in a segment should be large enough that allocating a new segmeng is a rare + thing. For example, on a server that will have 10k people logged in at once, + the receive buffer object pool should have segment sizes of at least 1000 + byte arrays per segment. + + The minimun number of segments that may exist. + Perform a full GC.Collect whenever a segment is allocated, and then again after allocation to compact the heap. + The frequency which segments are checked to see if they're eligible for cleanup. + + + + Forces the segment cleanup algorithm to be run. This method is intended + primarly for use from the Unit Test libraries. + + + + + Responsible for allocate 1 instance of an object that will be stored in a segment. + + An instance of whatever objec the pool is pooling. + + + + Checks in an instance of T owned by the object pool. This method is only intended to be called + by the WrappedObject class. + + The segment from which the instance is checked out. + The instance of T to check back into the segment. + + + + Checks an instance of T from the pool. If the pool is not sufficient to + allow the checkout, a new segment is created. + + A WrappedObject around the instance of T. To check + the instance back into the segment, be sureto dispose the WrappedObject + when finished. + + + + The total number of segments created. Intended to be used by the Unit Tests. + + + + + The number of items that are in a segment. Items in a segment + are all allocated at the same time, and are hopefully close to + each other in the managed heap. + + + + + The minimum number of segments. When segments are reclaimed, + this number of segments will always be left alone. These + segments are allocated at startup. + + + + + The age a segment must be before it's eligible for cleanup. + This is used to prevent thrash, and typical values are in + the 5 minute range. + + + + + The frequence which the cleanup thread runs. This is typically + expected to be in the 5 minute range. + + + + Size of the byte array used to store raw packet data + + + Raw packet data buffer + + + Length of the data to transmit + + + EndPoint of the remote host + + + + Create an allocated UDP packet buffer for receiving a packet + + + + + Create an allocated UDP packet buffer for sending a packet + + EndPoint of the remote host + + + + Create an allocated UDP packet buffer for sending a packet + + EndPoint of the remote host + Size of the buffer to allocate for packet data + + + + Object pool for packet buffers. This is used to allocate memory for all + incoming and outgoing packets, and zerocoding buffers for those packets + + + + + Initialize the object pool in client mode + + Server to connect to + + + + + + Initialize the object pool in server mode + + + + + + + Returns a packet buffer with EndPoint set if the buffer is in + client mode, or with EndPoint set to null in server mode + + Initialized UDPPacketBuffer object + + + + Default constructor + + + + + Check a packet buffer out of the pool + + A packet buffer object + + + + Static pre-defined animations available to all agents + + + + Agent with afraid expression on face + + + Agent aiming a bazooka (right handed) + + + Agent aiming a bow (left handed) + + + Agent aiming a hand gun (right handed) + + + Agent aiming a rifle (right handed) + + + Agent with angry expression on face + + + Agent hunched over (away) + + + Agent doing a backflip + + + Agent laughing while holding belly + + + Agent blowing a kiss + + + Agent with bored expression on face + + + Agent bowing to audience + + + Agent brushing himself/herself off + + + Agent in busy mode + + + Agent clapping hands + + + Agent doing a curtsey bow + + + Agent crouching + + + Agent crouching while walking + + + Agent crying + + + Agent unanimated with arms out (e.g. setting appearance) + + + Agent re-animated after set appearance finished + + + Agent dancing + + + Agent dancing + + + Agent dancing + + + Agent dancing + + + Agent dancing + + + Agent dancing + + + Agent dancing + + + Agent dancing + + + Agent on ground unanimated + + + Agent boozing it up + + + Agent with embarassed expression on face + + + Agent with afraid expression on face + + + Agent with angry expression on face + + + Agent with bored expression on face + + + Agent crying + + + Agent showing disdain (dislike) for something + + + Agent with embarassed expression on face + + + Agent with frowning expression on face + + + Agent with kissy face + + + Agent expressing laughgter + + + Agent with open mouth + + + Agent with repulsed expression on face + + + Agent expressing sadness + + + Agent shrugging shoulders + + + Agent with a smile + + + Agent expressing surprise + + + Agent sticking tongue out + + + Agent with big toothy smile + + + Agent winking + + + Agent expressing worry + + + Agent falling down + + + Agent walking (feminine version) + + + Agent wagging finger (disapproval) + + + I'm not sure I want to know + + + Agent in superman position + + + Agent in superman position + + + Agent greeting another + + + Agent holding bazooka (right handed) + + + Agent holding a bow (left handed) + + + Agent holding a handgun (right handed) + + + Agent holding a rifle (right handed) + + + Agent throwing an object (right handed) + + + Agent in static hover + + + Agent hovering downward + + + Agent hovering upward + + + Agent being impatient + + + Agent jumping + + + Agent jumping with fervor + + + Agent point to lips then rear end + + + Agent landing from jump, finished flight, etc + + + Agent laughing + + + Agent landing from jump, finished flight, etc + + + Agent sitting on a motorcycle + + + + + + Agent moving head side to side + + + Agent moving head side to side with unhappy expression + + + Agent taunting another + + + + + + Agent giving peace sign + + + Agent pointing at self + + + Agent pointing at another + + + Agent preparing for jump (bending knees) + + + Agent punching with left hand + + + Agent punching with right hand + + + Agent acting repulsed + + + Agent trying to be Chuck Norris + + + Rocks, Paper, Scissors 1, 2, 3 + + + Agent with hand flat over other hand + + + Agent with fist over other hand + + + Agent with two fingers spread over other hand + + + Agent running + + + Agent appearing sad + + + Agent saluting + + + Agent shooting bow (left handed) + + + Agent cupping mouth as if shouting + + + Agent shrugging shoulders + + + Agent in sit position + + + Agent in sit position (feminine) + + + Agent in sit position (generic) + + + Agent sitting on ground + + + Agent sitting on ground + + + + + + Agent sleeping on side + + + Agent smoking + + + Agent inhaling smoke + + + + + + Agent taking a picture + + + Agent standing + + + Agent standing up + + + Agent standing + + + Agent standing + + + Agent standing + + + Agent standing + + + Agent stretching + + + Agent in stride (fast walk) + + + Agent surfing + + + Agent acting surprised + + + Agent striking with a sword + + + Agent talking (lips moving) + + + Agent throwing a tantrum + + + Agent throwing an object (right handed) + + + Agent trying on a shirt + + + Agent turning to the left + + + Agent turning to the right + + + Agent typing + + + Agent walking + + + Agent whispering + + + Agent whispering with fingers in mouth + + + Agent winking + + + Agent winking + + + Agent worried + + + Agent nodding yes + + + Agent nodding yes with happy face + + + Agent floating with legs and arms crossed + + + + A dictionary containing all pre-defined animations + + A dictionary containing the pre-defined animations, + where the key is the animations ID, and the value is a string + containing a name to identify the purpose of the animation + + + + Represents an that represents an avatars body ie: Hair, Etc. + + + + Initializes a new instance of an AssetBodyPart object + + + Initializes a new instance of an AssetBodyPart object with parameters + A unique specific to this asset + A byte array containing the raw asset data + + + Initializes a new instance of an AssetBodyPart object with parameters + A string representing the values of the Bodypart + + + Override the base classes AssetType + + + + Archives assets + + + + + Archive assets + + + + + Archive the assets given to this archiver to the given archive. + + + + + + Write an assets metadata file to the given archive + + + + + + Write asset data files to the given archive + + + + + + + + + + OK + + + Transfer completed + + + + + + + + + Unknown error occurred + + + Equivalent to a 404 error + + + Client does not have permission for that resource + + + Unknown status + + + + + + + + + + + Unknown + + + Virtually all asset transfers use this channel + + + + + + + + + + + Asset from the asset server + + + Inventory item + + + Estate asset, such as an estate covenant + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Image file format + + + + + + + + + Number of milliseconds passed since the last transfer + packet was received + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Number of milliseconds to wait for a transfer header packet if out of order data was received + + + The event subscribers. null if no subcribers + + + Raises the XferReceived event + A XferReceivedEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the AssetUploaded event + A AssetUploadedEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the UploadProgress event + A UploadProgressEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the InitiateDownload event + A InitiateDownloadEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the ImageReceiveProgress event + A ImageReceiveProgressEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + Texture download cache + + + + Default constructor + + A reference to the GridClient object + + + + Request an asset download + + Asset UUID + Asset type, must be correct for the transfer to succeed + Whether to give this transfer an elevated priority + The callback to fire when the simulator responds with the asset data + + + + Request an asset download + + Asset UUID + Asset type, must be correct for the transfer to succeed + Whether to give this transfer an elevated priority + Source location of the requested asset + The callback to fire when the simulator responds with the asset data + + + + Request an asset download + + Asset UUID + Asset type, must be correct for the transfer to succeed + Whether to give this transfer an elevated priority + Source location of the requested asset + UUID of the transaction + The callback to fire when the simulator responds with the asset data + + + + Request an asset download through the almost deprecated Xfer system + + Filename of the asset to request + Whether or not to delete the asset + off the server after it is retrieved + Use large transfer packets or not + UUID of the file to request, if filename is + left empty + Asset type of vFileID, or + AssetType.Unknown if filename is not empty + Sets the FilePath in the request to Cache + (4) if true, otherwise Unknown (0) is used + + + + + + + Use UUID.Zero if you do not have the + asset ID but have all the necessary permissions + The item ID of this asset in the inventory + Use UUID.Zero if you are not requesting an + asset from an object inventory + The owner of this asset + Asset type + Whether to prioritize this asset download or not + + + + + Used to force asset data into the PendingUpload property, ie: for raw terrain uploads + + An AssetUpload object containing the data to upload to the simulator + + + + Request an asset be uploaded to the simulator + + The Object containing the asset data + If True, the asset once uploaded will be stored on the simulator + in which the client was connected in addition to being stored on the asset server + The of the transfer, can be used to correlate the upload with + events being fired + + + + Request an asset be uploaded to the simulator + + The of the asset being uploaded + A byte array containing the encoded asset data + If True, the asset once uploaded will be stored on the simulator + in which the client was connected in addition to being stored on the asset server + The of the transfer, can be used to correlate the upload with + events being fired + + + + Request an asset be uploaded to the simulator + + + Asset type to upload this data as + A byte array containing the encoded asset data + If True, the asset once uploaded will be stored on the simulator + in which the client was connected in addition to being stored on the asset server + The of the transfer, can be used to correlate the upload with + events being fired + + + + Initiate an asset upload + + The ID this asset will have if the + upload succeeds + Asset type to upload this data as + Raw asset data to upload + Whether to store this asset on the local + simulator or the grid-wide asset server + The tranaction id for the upload + The transaction ID of this transfer + + + + Request a texture asset from the simulator using the system to + manage the requests and re-assemble the image from the packets received from the simulator + + The of the texture asset to download + The of the texture asset. + Use for most textures, or for baked layer texture assets + A float indicating the requested priority for the transfer. Higher priority values tell the simulator + to prioritize the request before lower valued requests. An image already being transferred using the can have + its priority changed by resending the request with the new priority value + Number of quality layers to discard. + This controls the end marker of the data sent. Sending with value -1 combined with priority of 0 cancels an in-progress + transfer. + A bug exists in the Linden Simulator where a -1 will occasionally be sent with a non-zero priority + indicating an off-by-one error. + The packet number to begin the request at. A value of 0 begins the request + from the start of the asset texture + The callback to fire when the image is retrieved. The callback + will contain the result of the request and the texture asset data + If true, the callback will be fired for each chunk of the downloaded image. + The callback asset parameter will contain all previously received chunks of the texture asset starting + from the beginning of the request + + Request an image and fire a callback when the request is complete + + Client.Assets.RequestImage(UUID.Parse("c307629f-e3a1-4487-5e88-0d96ac9d4965"), ImageType.Normal, TextureDownloader_OnDownloadFinished); + + private void TextureDownloader_OnDownloadFinished(TextureRequestState state, AssetTexture asset) + { + if(state == TextureRequestState.Finished) + { + Console.WriteLine("Texture {0} ({1} bytes) has been successfully downloaded", + asset.AssetID, + asset.AssetData.Length); + } + } + + Request an image and use an inline anonymous method to handle the downloaded texture data + + Client.Assets.RequestImage(UUID.Parse("c307629f-e3a1-4487-5e88-0d96ac9d4965"), ImageType.Normal, delegate(TextureRequestState state, AssetTexture asset) + { + if(state == TextureRequestState.Finished) + { + Console.WriteLine("Texture {0} ({1} bytes) has been successfully downloaded", + asset.AssetID, + asset.AssetData.Length); + } + } + ); + + Request a texture, decode the texture to a bitmap image and apply it to a imagebox + + Client.Assets.RequestImage(UUID.Parse("c307629f-e3a1-4487-5e88-0d96ac9d4965"), ImageType.Normal, TextureDownloader_OnDownloadFinished); + + private void TextureDownloader_OnDownloadFinished(TextureRequestState state, AssetTexture asset) + { + if(state == TextureRequestState.Finished) + { + ManagedImage imgData; + Image bitmap; + + if (state == TextureRequestState.Finished) + { + OpenJPEG.DecodeToImage(assetTexture.AssetData, out imgData, out bitmap); + picInsignia.Image = bitmap; + } + } + } + + + + + + Overload: Request a texture asset from the simulator using the system to + manage the requests and re-assemble the image from the packets received from the simulator + + The of the texture asset to download + The callback to fire when the image is retrieved. The callback + will contain the result of the request and the texture asset data + + + + Overload: Request a texture asset from the simulator using the system to + manage the requests and re-assemble the image from the packets received from the simulator + + The of the texture asset to download + The of the texture asset. + Use for most textures, or for baked layer texture assets + The callback to fire when the image is retrieved. The callback + will contain the result of the request and the texture asset data + + + + Overload: Request a texture asset from the simulator using the system to + manage the requests and re-assemble the image from the packets received from the simulator + + The of the texture asset to download + The of the texture asset. + Use for most textures, or for baked layer texture assets + The callback to fire when the image is retrieved. The callback + will contain the result of the request and the texture asset data + If true, the callback will be fired for each chunk of the downloaded image. + The callback asset parameter will contain all previously received chunks of the texture asset starting + from the beginning of the request + + + + Cancel a texture request + + The texture assets + + + + Lets TexturePipeline class fire the progress event + + The texture ID currently being downloaded + the number of bytes transferred + the total number of bytes expected + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Raised when the simulator responds sends + + + Raised during upload completes + + + Raised during upload with progres update + + + Fired when the simulator sends an InitiateDownloadPacket, used to download terrain .raw files + + + Fired when a texture is in the process of being downloaded by the TexturePipeline class + + + + Callback used for various asset download requests + + Transfer information + Downloaded asset, null on fail + + + + Callback used upon competition of baked texture upload + + Asset UUID of the newly uploaded baked texture + + + Xfer data + + + Upload data + + + Filename used on the simulator + + + Filename used by the client + + + UUID of the image that is in progress + + + Number of bytes received so far + + + Image size in bytes + + + + + + + + The event subscribers, null of no subscribers + + + Raises the AttachedSound Event + A AttachedSoundEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the AttachedSoundGainChange Event + A AttachedSoundGainChangeEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the SoundTrigger Event + A SoundTriggerEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the PreloadSound Event + A PreloadSoundEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + + Construct a new instance of the SoundManager class, used for playing and receiving + sound assets + + A reference to the current GridClient instance + + + + Plays a sound in the current region at full volume from avatar position + + UUID of the sound to be played + + + + Plays a sound in the current region at full volume + + UUID of the sound to be played. + position for the sound to be played at. Normally the avatar. + + + + Plays a sound in the current region + + UUID of the sound to be played. + position for the sound to be played at. Normally the avatar. + volume of the sound, from 0.0 to 1.0 + + + + Plays a sound in the specified sim + + UUID of the sound to be played. + UUID of the sound to be played. + position for the sound to be played at. Normally the avatar. + volume of the sound, from 0.0 to 1.0 + + + + Play a sound asset + + UUID of the sound to be played. + handle id for the sim to be played in. + position for the sound to be played at. Normally the avatar. + volume of the sound, from 0.0 to 1.0 + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Raised when the simulator sends us data containing + sound + + + Raised when the simulator sends us data containing + ... + + + Raised when the simulator sends us data containing + ... + + + Raised when the simulator sends us data containing + ... + + + Provides data for the event + The event occurs when the simulator sends + the sound data which emits from an agents attachment + + The following code example shows the process to subscribe to the event + and a stub to handle the data passed from the simulator + + // Subscribe to the AttachedSound event + Client.Sound.AttachedSound += Sound_AttachedSound; + + // process the data raised in the event here + private void Sound_AttachedSound(object sender, AttachedSoundEventArgs e) + { + // ... Process AttachedSoundEventArgs here ... + } + + + + + + Construct a new instance of the SoundTriggerEventArgs class + + The sound asset id + The ID of the owner + The ID of the object + The volume level + The + + + Get the sound asset id + + + Get the ID of the owner + + + Get the ID of the Object + + + Get the volume level + + + Get the + + + Provides data for the event + The event occurs when an attached sound + changes its volume level + + + + Construct a new instance of the AttachedSoundGainChangedEventArgs class + + The ID of the Object + The new volume level + + + Get the ID of the Object + + + Get the volume level + + + Provides data for the event + The event occurs when the simulator forwards + a request made by yourself or another agent to play either an asset sound or a built in sound + + Requests to play sounds where the is not one of the built-in + will require sending a request to download the sound asset before it can be played + + + The following code example uses the , + and + properties to display some information on a sound request on the window. + + // subscribe to the event + Client.Sound.SoundTrigger += Sound_SoundTrigger; + + // play the pre-defined BELL_TING sound + Client.Sound.SendSoundTrigger(Sounds.BELL_TING); + + // handle the response data + private void Sound_SoundTrigger(object sender, SoundTriggerEventArgs e) + { + Console.WriteLine("{0} played the sound {1} at volume {2}", + e.OwnerID, e.SoundID, e.Gain); + } + + + + + + Construct a new instance of the SoundTriggerEventArgs class + + The sound asset id + The ID of the owner + The ID of the object + The ID of the objects parent + The volume level + The regionhandle + The source position + + + Get the sound asset id + + + Get the ID of the owner + + + Get the ID of the Object + + + Get the ID of the objects parent + + + Get the volume level + + + Get the regionhandle + + + Get the source position + + + Provides data for the event + The event occurs when the simulator sends + the appearance data for an avatar + + The following code example uses the and + properties to display the selected shape of an avatar on the window. + + // subscribe to the event + Client.Avatars.AvatarAppearance += Avatars_AvatarAppearance; + + // handle the data when the event is raised + void Avatars_AvatarAppearance(object sender, AvatarAppearanceEventArgs e) + { + Console.WriteLine("The Agent {0} is using a {1} shape.", e.AvatarID, (e.VisualParams[31] > 0) : "male" ? "female") + } + + + + + + Construct a new instance of the PreloadSoundEventArgs class + + The sound asset id + The ID of the owner + The ID of the object + + + Get the sound asset id + + + Get the ID of the owner + + + Get the ID of the Object + + + + Class for controlling various system settings. + + Some values are readonly because they affect things that + happen when the GridClient object is initialized, so changing them at + runtime won't do any good. Non-readonly values may affect things that + happen at login or dynamically + + + Main grid login server + + + Beta grid login server + + + + InventoryManager requests inventory information on login, + GridClient initializes an Inventory store for main inventory. + + + + + InventoryManager requests library information on login, + GridClient initializes an Inventory store for the library. + + + + Number of milliseconds between sending pings to each sim + + + Number of milliseconds between sending camera updates + + + Number of milliseconds between updating the current + positions of moving, non-accelerating and non-colliding objects + + + Millisecond interval between ticks, where all ACKs are + sent out and the age of unACKed packets is checked + + + The initial size of the packet inbox, where packets are + stored before processing + + + Maximum size of packet that we want to send over the wire + + + The maximum value of a packet sequence number before it + rolls over back to one + + + The maximum size of the sequence number archive, used to + check for resent and/or duplicate packets + + + The relative directory where external resources are kept + + + Login server to connect to + + + IP Address the client will bind to + + + Use XML-RPC Login or LLSD Login, default is XML-RPC Login + + + Number of milliseconds before an asset transfer will time + out + + + Number of milliseconds before a teleport attempt will time + out + + + Number of milliseconds before NetworkManager.Logout() will + time out + + + Number of milliseconds before a CAPS call will time out + Setting this too low will cause web requests time out and + possibly retry repeatedly + + + Number of milliseconds for xml-rpc to timeout + + + Milliseconds before a packet is assumed lost and resent + + + Milliseconds without receiving a packet before the + connection to a simulator is assumed lost + + + Milliseconds to wait for a simulator info request through + the grid interface + + + Maximum number of queued ACKs to be sent before SendAcks() + is forced + + + Network stats queue length (seconds) + + + Enable to process packets synchronously, where all of the + callbacks for each packet must return before the next packet is + processed + This is an experimental feature and is not completely + reliable yet. Ideally it would reduce context switches and thread + overhead, but several calls currently block for a long time and + would need to be rewritten as asynchronous code before this is + feasible + + + Enable/disable storing terrain heightmaps in the + TerrainManager + + + Enable/disable sending periodic camera updates + + + Enable/disable automatically setting agent appearance at + login and after sim crossing + + + Enable/disable automatically setting the bandwidth throttle + after connecting to each simulator + The default throttle uses the equivalent of the maximum + bandwidth setting in the official client. If you do not set a + throttle your connection will by default be throttled well below + the minimum values and you may experience connection problems + + + Enable/disable the sending of pings to monitor lag and + packet loss + + + Should we connect to multiple sims? This will allow + viewing in to neighboring simulators and sim crossings + (Experimental) + + + If true, all object update packets will be decoded in to + native objects. If false, only updates for our own agent will be + decoded. Registering an event handler will force objects for that + type to always be decoded. If this is disabled the object tracking + will have missing or partial prim and avatar information + + + If true, when a cached object check is received from the + server the full object info will automatically be requested + + + Whether to establish connections to HTTP capabilities + servers for simulators + + + Whether to decode sim stats + + + The capabilities servers are currently designed to + periodically return a 502 error which signals for the client to + re-establish a connection. Set this to true to log those 502 errors + + + If true, any reference received for a folder or item + the library is not aware of will automatically be fetched + + + If true, and SEND_AGENT_UPDATES is true, + AgentUpdate packets will continuously be sent out to give the bot + smoother movement and autopiloting + + + If true, currently visible avatars will be stored + in dictionaries inside Simulator.ObjectAvatars. + If false, a new Avatar or Primitive object will be created + each time an object update packet is received + + + If true, currently visible avatars will be stored + in dictionaries inside Simulator.ObjectPrimitives. + If false, a new Avatar or Primitive object will be created + each time an object update packet is received + + + If true, position and velocity will periodically be + interpolated (extrapolated, technically) for objects and + avatars that are being tracked by the library. This is + necessary to increase the accuracy of speed and position + estimates for simulated objects + + + + If true, utilization statistics will be tracked. There is a minor penalty + in CPU time for enabling this option. + + + + If true, parcel details will be stored in the + Simulator.Parcels dictionary as they are received + + + + If true, an incoming parcel properties reply will automatically send + a request for the parcel access list + + + + + if true, an incoming parcel properties reply will automatically send + a request for the traffic count. + + + + + If true, images, and other assets downloaded from the server + will be cached in a local directory + + + + Path to store cached texture data + + + Maximum size cached files are allowed to take on disk (bytes) + + + Default color used for viewer particle effects + + + Maximum number of times to resend a failed packet + + + Throttle outgoing packet rate + + + UUID of a texture used by some viewers to indentify type of client used + + + The maximum number of concurrent texture downloads allowed + Increasing this number will not necessarily increase texture retrieval times due to + simulator throttles + + + + The Refresh timer inteval is used to set the delay between checks for stalled texture downloads + + This is a static variable which applies to all instances + + + + Textures taking longer than this value will be flagged as timed out and removed from the pipeline + + + + + Get or set the minimum log level to output to the console by default + + If the library is not compiled with DEBUG defined and this level is set to DEBUG + You will get no output on the console. This behavior can be overriden by creating + a logger configuration file for log4net + + + + Attach avatar names to log messages + + + Log packet retransmission info + + + Constructor + Reference to a GridClient object + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Cost of uploading an asset + Read-only since this value is dynamically fetched at login + + + + Represents a string of characters encoded with specific formatting properties + + + + A text string containing main text of the notecard + + + List of s embedded on the notecard + + + Construct an Asset of type Notecard + + + + Construct an Asset object of type Notecard + + A unique specific to this asset + A byte array containing the raw asset data + + + + Construct an Asset object of type Notecard + + A text string containing the main body text of the notecard + + + + Encode the raw contents of a string with the specific Linden Text properties + + + + + Decode the raw asset data including the Linden Text properties + + true if the AssetData was successfully decoded + + + Override the base classes AssetType + + + + Capabilities is the name of the bi-directional HTTP REST protocol + used to communicate non real-time transactions such as teleporting or + group messaging + + + + Reference to the simulator this system is connected to + + + + Default constructor + + + + + + + Request the URI of a named capability + + Name of the capability to request + The URI of the requested capability, or String.Empty if + the capability does not exist + + + + Process any incoming events, check to see if we have a message created for the event, + + + + + + Capabilities URI this system was initialized with + + + Whether the capabilities event queue is connected and + listening for incoming events + + + + Triggered when an event is received via the EventQueueGet + capability + + Event name + Decoded event data + The simulator that generated the event + + + + Level of Detail mesh + + + + + Return a decoded capabilities message as a strongly typed object + + A string containing the name of the capabilities message key + An to decode + A strongly typed object containing the decoded information from the capabilities message, or null + if no existing Message object exists for the specified event + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Login Request Parameters + + + + The URL of the Login Server + + + The number of milliseconds to wait before a login is considered + failed due to timeout + + + The request method + login_to_simulator is currently the only supported method + + + The Agents First name + + + The Agents Last name + + + A md5 hashed password + plaintext password will be automatically hashed + + + The agents starting location once logged in + Either "last", "home", or a string encoded URI + containing the simulator name and x/y/z coordinates e.g: uri:hooper&128&152&17 + + + A string containing the client software channel information + Second Life Release + + + The client software version information + The official viewer uses: Second Life Release n.n.n.n + where n is replaced with the current version of the viewer + + + A string containing the platform information the agent is running on + + + A string hash of the network cards Mac Address + + + Unknown or deprecated + + + A string hash of the first disk drives ID used to identify this clients uniqueness + + + A string containing the viewers Software, this is not directly sent to the login server but + instead is used to generate the Version string + + + A string representing the software creator. This is not directly sent to the login server but + is used by the library to generate the Version information + + + If true, this agent agrees to the Terms of Service of the grid its connecting to + + + Unknown + + + An array of string sent to the login server to enable various options + + + A randomly generated ID to distinguish between login attempts. This value is only used + internally in the library and is never sent over the wire + + + + The decoded data returned from the login server after a successful login + + + + true, false, indeterminate + + + Login message of the day + + + M or PG, also agent_region_access and agent_access_max + + + + Parse LLSD Login Reply Data + + An + contaning the login response data + XML-RPC logins do not require this as XML-RPC.NET + automatically populates the struct properly using attributes + + + Sort by name + + + Sort by date + + + Sort folders by name, regardless of whether items are + sorted by name or date + + + Place system folders at the top + + + + Possible destinations for DeRezObject request + + + + + + + Copy from in-world to agent inventory + + + Derez to TaskInventory + + + + + + Take Object + + + + + + Delete Object + + + Put an avatar attachment into agent inventory + + + + + + Return an object back to the owner's inventory + + + Return a deeded object back to the last owner's inventory + + + + Upper half of the Flags field for inventory items + + + + Indicates that the NextOwner permission will be set to the + most restrictive set of permissions found in the object set + (including linkset items and object inventory items) on next rez + + + Indicates that the object sale information has been + changed + + + If set, and a slam bit is set, indicates BaseMask will be overwritten on Rez + + + If set, and a slam bit is set, indicates OwnerMask will be overwritten on Rez + + + If set, and a slam bit is set, indicates GroupMask will be overwritten on Rez + + + If set, and a slam bit is set, indicates EveryoneMask will be overwritten on Rez + + + If set, and a slam bit is set, indicates NextOwnerMask will be overwritten on Rez + + + Indicates whether this object is composed of multiple + items or not + + + Indicates that the asset is only referenced by this + inventory item. If this item is deleted or updated to reference a + new assetID, the asset can be deleted + + + + Base Class for Inventory Items + + + + of item/folder + + + of parent folder + + + Name of item/folder + + + Item/Folder Owners + + + + Constructor, takes an itemID as a parameter + + The of the item + + + + + + + + + + + + + + + + Generates a number corresponding to the value of the object to support the use of a hash table, + suitable for use in hashing algorithms and data structures such as a hash table + + A Hashcode of all the combined InventoryBase fields + + + + Determine whether the specified object is equal to the current object + + InventoryBase object to compare against + true if objects are the same + + + + Determine whether the specified object is equal to the current object + + InventoryBase object to compare against + true if objects are the same + + + + An Item in Inventory + + + + The of this item + + + The combined of this item + + + The type of item from + + + The type of item from the enum + + + The of the creator of this item + + + A Description of this item + + + The s this item is set to or owned by + + + If true, item is owned by a group + + + The price this item can be purchased for + + + The type of sale from the enum + + + Combined flags from + + + Time and date this inventory item was created, stored as + UTC (Coordinated Universal Time) + + + Used to update the AssetID in requests sent to the server + + + The of the previous owner of the item + + + + Construct a new InventoryItem object + + The of the item + + + + Construct a new InventoryItem object of a specific Type + + The type of item from + of the item + + + + Indicates inventory item is a link + + True if inventory item is a link to another inventory item + + + + + + + + + + + + + + + + Generates a number corresponding to the value of the object to support the use of a hash table. + Suitable for use in hashing algorithms and data structures such as a hash table + + A Hashcode of all the combined InventoryItem fields + + + + Compares an object + + The object to compare + true if comparison object matches + + + + Determine whether the specified object is equal to the current object + + The object to compare against + true if objects are the same + + + + Determine whether the specified object is equal to the current object + + The object to compare against + true if objects are the same + + + + InventoryTexture Class representing a graphical image + + + + + + Construct an InventoryTexture object + + A which becomes the + objects AssetUUID + + + + Construct an InventoryTexture object from a serialization stream + + + + + InventorySound Class representing a playable sound + + + + + Construct an InventorySound object + + A which becomes the + objects AssetUUID + + + + Construct an InventorySound object from a serialization stream + + + + + InventoryCallingCard Class, contains information on another avatar + + + + + Construct an InventoryCallingCard object + + A which becomes the + objects AssetUUID + + + + Construct an InventoryCallingCard object from a serialization stream + + + + + InventoryLandmark Class, contains details on a specific location + + + + + Construct an InventoryLandmark object + + A which becomes the + objects AssetUUID + + + + Construct an InventoryLandmark object from a serialization stream + + + + + Landmarks use the InventoryItemFlags struct and will have a flag of 1 set if they have been visited + + + + + InventoryObject Class contains details on a primitive or coalesced set of primitives + + + + + Construct an InventoryObject object + + A which becomes the + objects AssetUUID + + + + Construct an InventoryObject object from a serialization stream + + + + + Gets or sets the upper byte of the Flags value + + + + + Gets or sets the object attachment point, the lower byte of the Flags value + + + + + InventoryNotecard Class, contains details on an encoded text document + + + + + Construct an InventoryNotecard object + + A which becomes the + objects AssetUUID + + + + Construct an InventoryNotecard object from a serialization stream + + + + + InventoryCategory Class + + TODO: Is this even used for anything? + + + + Construct an InventoryCategory object + + A which becomes the + objects AssetUUID + + + + Construct an InventoryCategory object from a serialization stream + + + + + InventoryLSL Class, represents a Linden Scripting Language object + + + + + Construct an InventoryLSL object + + A which becomes the + objects AssetUUID + + + + Construct an InventoryLSL object from a serialization stream + + + + + InventorySnapshot Class, an image taken with the viewer + + + + + Construct an InventorySnapshot object + + A which becomes the + objects AssetUUID + + + + Construct an InventorySnapshot object from a serialization stream + + + + + InventoryAttachment Class, contains details on an attachable object + + + + + Construct an InventoryAttachment object + + A which becomes the + objects AssetUUID + + + + Construct an InventoryAttachment object from a serialization stream + + + + + Get the last AttachmentPoint this object was attached to + + + + + InventoryWearable Class, details on a clothing item or body part + + + + + Construct an InventoryWearable object + + A which becomes the + objects AssetUUID + + + + Construct an InventoryWearable object from a serialization stream + + + + + The , Skin, Shape, Skirt, Etc + + + + + InventoryAnimation Class, A bvh encoded object which animates an avatar + + + + + Construct an InventoryAnimation object + + A which becomes the + objects AssetUUID + + + + Construct an InventoryAnimation object from a serialization stream + + + + + InventoryGesture Class, details on a series of animations, sounds, and actions + + + + + Construct an InventoryGesture object + + A which becomes the + objects AssetUUID + + + + Construct an InventoryGesture object from a serialization stream + + + + + A folder contains s and has certain attributes specific + to itself + + + + The Preferred for a folder. + + + The Version of this folder + + + Number of child items this folder contains. + + + + Constructor + + UUID of the folder + + + + + + + + + + Get Serilization data for this InventoryFolder object + + + + + Construct an InventoryFolder object from a serialization stream + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Tools for dealing with agents inventory + + + + Used for converting shadow_id to asset_id + + + The event subscribers, null of no subscribers + + + Raises the ItemReceived Event + A ItemReceivedEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the FolderUpdated Event + A FolderUpdatedEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the InventoryObjectOffered Event + A InventoryObjectOfferedEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the TaskItemReceived Event + A TaskItemReceivedEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the FindObjectByPath Event + A FindObjectByPathEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the TaskInventoryReply Event + A TaskInventoryReplyEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the SaveAssetToInventory Event + A SaveAssetToInventoryEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the ScriptRunningReply Event + A ScriptRunningReplyEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + Partial mapping of AssetTypes to folder names + + + + Default constructor + + Reference to the GridClient object + + + + Fetch an inventory item from the dataserver + + The items + The item Owners + a integer representing the number of milliseconds to wait for results + An object on success, or null if no item was found + Items will also be sent to the event + + + + Request A single inventory item + + The items + The item Owners + + + + + Request inventory items + + Inventory items to request + Owners of the inventory items + + + + + Get contents of a folder + + The of the folder to search + The of the folders owner + true to retrieve folders + true to retrieve items + sort order to return results in + a integer representing the number of milliseconds to wait for results + A list of inventory items matching search criteria within folder + + InventoryFolder.DescendentCount will only be accurate if both folders and items are + requested + + + + Request the contents of an inventory folder + + The folder to search + The folder owners + true to return s contained in folder + true to return s containd in folder + the sort order to return items in + + + + + Returns the UUID of the folder (category) that defaults to + containing 'type'. The folder is not necessarily only for that + type + + This will return the root folder if one does not exist + + The UUID of the desired folder if found, the UUID of the RootFolder + if not found, or UUID.Zero on failure + + + + Find an object in inventory using a specific path to search + + The folder to begin the search in + The object owners + A string path to search + milliseconds to wait for a reply + Found items or if + timeout occurs or item is not found + + + + Find inventory items by path + + The folder to begin the search in + The object owners + A string path to search, folders/objects separated by a '/' + Results are sent to the event + + + + Search inventory Store object for an item or folder + + The folder to begin the search in + An array which creates a path to search + Number of levels below baseFolder to conduct searches + if True, will stop searching after first match is found + A list of inventory items found + + + + Move an inventory item or folder to a new location + + The item or folder to move + The to move item or folder to + + + + Move an inventory item or folder to a new location and change its name + + The item or folder to move + The to move item or folder to + The name to change the item or folder to + + + + Move and rename a folder + + The source folders + The destination folders + The name to change the folder to + + + + Update folder properties + + of the folder to update + Sets folder's parent to + Folder name + Folder type + + + + Move a folder + + The source folders + The destination folders + + + + Move multiple folders, the keys in the Dictionary parameter, + to a new parents, the value of that folder's key. + + A Dictionary containing the + of the source as the key, and the + of the destination as the value + + + + Move an inventory item to a new folder + + The of the source item to move + The of the destination folder + + + + Move and rename an inventory item + + The of the source item to move + The of the destination folder + The name to change the folder to + + + + Move multiple inventory items to new locations + + A Dictionary containing the + of the source item as the key, and the + of the destination folder as the value + + + + Remove descendants of a folder + + The of the folder + + + + Remove a single item from inventory + + The of the inventory item to remove + + + + Remove a folder from inventory + + The of the folder to remove + + + + Remove multiple items or folders from inventory + + A List containing the s of items to remove + A List containing the s of the folders to remove + + + + Empty the Lost and Found folder + + + + + Empty the Trash folder + + + + + + + + + + + Proper use is to upload the inventory's asset first, then provide the Asset's TransactionID here. + + + + + + + + + + + + + Proper use is to upload the inventory's asset first, then provide the Asset's TransactionID here. + + + + + + + + Creates a new inventory folder + + ID of the folder to put this folder in + Name of the folder to create + The UUID of the newly created folder + + + + Creates a new inventory folder + + ID of the folder to put this folder in + Name of the folder to create + Sets this folder as the default folder + for new assets of the specified type. Use AssetType.Unknown + to create a normal folder, otherwise it will likely create a + duplicate of an existing folder type + The UUID of the newly created folder + If you specify a preferred type of AsseType.Folder + it will create a new root folder which may likely cause all sorts + of strange problems + + + + Create an inventory item and upload asset data + + Asset data + Inventory item name + Inventory item description + Asset type + Inventory type + Put newly created inventory in this folder + Delegate that will receive feedback on success or failure + + + + Create an inventory item and upload asset data + + Asset data + Inventory item name + Inventory item description + Asset type + Inventory type + Put newly created inventory in this folder + Permission of the newly created item + (EveryoneMask, GroupMask, and NextOwnerMask of Permissions struct are supported) + Delegate that will receive feedback on success or failure + + + + Creates inventory link to another inventory item or folder + + Put newly created link in folder with this UUID + Inventory item or folder + Method to call upon creation of the link + + + + Creates inventory link to another inventory item + + Put newly created link in folder with this UUID + Original inventory item + Method to call upon creation of the link + + + + Creates inventory link to another inventory folder + + Put newly created link in folder with this UUID + Original inventory folder + Method to call upon creation of the link + + + + Creates inventory link to another inventory item or folder + + Put newly created link in folder with this UUID + Original item's UUID + Name + Description + Asset Type + Inventory Type + Transaction UUID + Method to call upon creation of the link + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Request a copy of an asset embedded within a notecard + + Usually UUID.Zero for copying an asset from a notecard + UUID of the notecard to request an asset from + Target folder for asset to go to in your inventory + UUID of the embedded asset + callback to run when item is copied to inventory + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Save changes to notecard embedded in object contents + + Encoded notecard asset data + Notecard UUID + Object's UUID + Called upon finish of the upload with status information + + + + Upload new gesture asset for an inventory gesture item + + Encoded gesture asset + Gesture inventory UUID + Callback whick will be called when upload is complete + + + + Update an existing script in an agents Inventory + + A byte[] array containing the encoded scripts contents + the itemID of the script + if true, sets the script content to run on the mono interpreter + + + + + Update an existing script in an task Inventory + + A byte[] array containing the encoded scripts contents + the itemID of the script + UUID of the prim containting the script + if true, sets the script content to run on the mono interpreter + if true, sets the script to running + + + + + Rez an object from inventory + + Simulator to place object in + Rotation of the object when rezzed + Vector of where to place object + InventoryItem object containing item details + + + + Rez an object from inventory + + Simulator to place object in + Rotation of the object when rezzed + Vector of where to place object + InventoryItem object containing item details + UUID of group to own the object + + + + Rez an object from inventory + + Simulator to place object in + Rotation of the object when rezzed + Vector of where to place object + InventoryItem object containing item details + UUID of group to own the object + User defined queryID to correlate replies + If set to true, the CreateSelected flag + will be set on the rezzed object + + + + DeRez an object from the simulator to the agents Objects folder in the agents Inventory + + The simulator Local ID of the object + If objectLocalID is a child primitive in a linkset, the entire linkset will be derezzed + + + + DeRez an object from the simulator and return to inventory + + The simulator Local ID of the object + The type of destination from the enum + The destination inventory folders -or- + if DeRezzing object to a tasks Inventory, the Tasks + The transaction ID for this request which + can be used to correlate this request with other packets + If objectLocalID is a child primitive in a linkset, the entire linkset will be derezzed + + + + Rez an item from inventory to its previous simulator location + + + + + + + + + Give an inventory item to another avatar + + The of the item to give + The name of the item + The type of the item from the enum + The of the recipient + true to generate a beameffect during transfer + + + + Give an inventory Folder with contents to another avatar + + The of the Folder to give + The name of the folder + The type of the item from the enum + The of the recipient + true to generate a beameffect during transfer + + + + Copy or move an from agent inventory to a task (primitive) inventory + + The target object + The item to copy or move from inventory + + For items with copy permissions a copy of the item is placed in the tasks inventory, + for no-copy items the object is moved to the tasks inventory + + + + Retrieve a listing of the items contained in a task (Primitive) + + The tasks + The tasks simulator local ID + milliseconds to wait for reply from simulator + A list containing the inventory items inside the task or null + if a timeout occurs + This request blocks until the response from the simulator arrives + or timeoutMS is exceeded + + + + Request the contents of a tasks (primitives) inventory from the + current simulator + + The LocalID of the object + + + + + Request the contents of a tasks (primitives) inventory + + The simulator Local ID of the object + A reference to the simulator object that contains the object + + + + + Move an item from a tasks (Primitive) inventory to the specified folder in the avatars inventory + + LocalID of the object in the simulator + UUID of the task item to move + The ID of the destination folder in this agents inventory + Simulator Object + Raises the event + + + + Remove an item from an objects (Prim) Inventory + + LocalID of the object in the simulator + UUID of the task item to remove + Simulator Object + You can confirm the removal by comparing the tasks inventory serial before and after the + request with the request combined with + the event + + + + Copy an InventoryScript item from the Agents Inventory into a primitives task inventory + + An unsigned integer representing a primitive being simulated + An which represents a script object from the agents inventory + true to set the scripts running state to enabled + A Unique Transaction ID + + The following example shows the basic steps necessary to copy a script from the agents inventory into a tasks inventory + and assumes the script exists in the agents inventory. + + uint primID = 95899503; // Fake prim ID + UUID scriptID = UUID.Parse("92a7fe8a-e949-dd39-a8d8-1681d8673232"); // Fake Script UUID in Inventory + + Client.Inventory.FolderContents(Client.Inventory.FindFolderForType(AssetType.LSLText), Client.Self.AgentID, + false, true, InventorySortOrder.ByName, 10000); + + Client.Inventory.RezScript(primID, (InventoryItem)Client.Inventory.Store[scriptID]); + + + + + + Request the running status of a script contained in a task (primitive) inventory + + The ID of the primitive containing the script + The ID of the script + The event can be used to obtain the results of the + request + + + + + Send a request to set the running state of a script contained in a task (primitive) inventory + + The ID of the primitive containing the script + The ID of the script + true to set the script running, false to stop a running script + To verify the change you can use the method combined + with the event + + + + Create a CRC from an InventoryItem + + The source InventoryItem + A uint representing the source InventoryItem as a CRC + + + + Reverses a cheesy XORing with a fixed UUID to convert a shadow_id to an asset_id + + Obfuscated shadow_id value + Deobfuscated asset_id value + + + + Does a cheesy XORing with a fixed UUID to convert an asset_id to a shadow_id + + asset_id value to obfuscate + Obfuscated shadow_id value + + + + Wrapper for creating a new object + + The type of item from the enum + The of the newly created object + An object with the type and id passed + + + + Parse the results of a RequestTaskInventory() response + + A string which contains the data from the task reply + A List containing the items contained within the tasks inventory + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + + UpdateCreateInventoryItem packets are received when a new inventory item + is created. This may occur when an object that's rezzed in world is + taken into inventory, when an item is created using the CreateInventoryItem + packet, or when an object is purchased + + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Raised when the simulator sends us data containing + ... + + + Raised when the simulator sends us data containing + ... + + + Raised when the simulator sends us data containing + an inventory object sent by another avatar or primitive + + + Raised when the simulator sends us data containing + ... + + + Raised when the simulator sends us data containing + ... + + + Raised when the simulator sends us data containing + ... + + + Raised when the simulator sends us data containing + ... + + + Raised when the simulator sends us data containing + ... + + + + Get this agents Inventory data + + + + + Callback for inventory item creation finishing + + Whether the request to create an inventory + item succeeded or not + Inventory item being created. If success is + false this will be null + + + + Callback for an inventory item being create from an uploaded asset + + true if inventory item creation was successful + + + + + + + + + + + + + Reply received when uploading an inventory asset + + Has upload been successful + Error message if upload failed + Inventory asset UUID + New asset UUID + + + + Delegate that is invoked when script upload is completed + + Has upload succeded (note, there still might be compile errors) + Upload status message + Is compilation successful + If compilation failed, list of error messages, null on compilation success + Script inventory UUID + Script's new asset UUID + + + Set to true to accept offer, false to decline it + + + The folder to accept the inventory into, if null default folder for will be used + + + + Callback when an inventory object is accepted and received from a + task inventory. This is the callback in which you actually get + the ItemID, as in ObjectOfferedCallback it is null when received + from a task. + + + + + Holds group information for Avatars such as those you might find in a profile + + + + true of Avatar accepts group notices + + + Groups Key + + + Texture Key for groups insignia + + + Name of the group + + + Powers avatar has in the group + + + Avatars Currently selected title + + + true of Avatar has chosen to list this in their profile + + + + Contains an animation currently being played by an agent + + + + The ID of the animation asset + + + A number to indicate start order of currently playing animations + On Linden Grids this number is unique per region, with OpenSim it is per client + + + + + + + Holds group information on an individual profile pick + + + + + Retrieve friend status notifications, and retrieve avatar names and + profiles + + + + The event subscribers, null of no subscribers + + + Raises the AvatarAnimation Event + An AvatarAnimationEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the AvatarAppearance Event + A AvatarAppearanceEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the UUIDNameReply Event + A UUIDNameReplyEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the AvatarInterestsReply Event + A AvatarInterestsReplyEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the AvatarPropertiesReply Event + A AvatarPropertiesReplyEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the AvatarGroupsReply Event + A AvatarGroupsReplyEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the AvatarPickerReply Event + A AvatarPickerReplyEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the ViewerEffectPointAt Event + A ViewerEffectPointAtEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the ViewerEffectLookAt Event + A ViewerEffectLookAtEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the ViewerEffect Event + A ViewerEffectEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the AvatarPicksReply Event + A AvatarPicksReplyEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the PickInfoReply Event + A PickInfoReplyEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the AvatarClassifiedReply Event + A AvatarClassifiedReplyEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + The event subscribers, null of no subscribers + + + Raises the ClassifiedInfoReply Event + A ClassifiedInfoReplyEventArgs object containing + the data sent from the simulator + + + Thread sync lock object + + + + Represents other avatars + + + + + Tracks the specified avatar on your map + Avatar ID to track + + + + Request a single avatar name + + The avatar key to retrieve a name for + + + + Request a list of avatar names + + The avatar keys to retrieve names for + + + + Start a request for Avatar Properties + + + + + + Search for an avatar (first name, last name) + + The name to search for + An ID to associate with this query + + + + Start a request for Avatar Picks + + UUID of the avatar + + + + Start a request for Avatar Classifieds + + UUID of the avatar + + + + Start a request for details of a specific profile pick + + UUID of the avatar + UUID of the profile pick + + + + Start a request for details of a specific profile classified + + UUID of the avatar + UUID of the profile classified + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + + Crossed region handler for message that comes across the EventQueue. Sent to an agent + when the agent crosses a sim border into a new region. + + The message key + the IMessage object containing the deserialized data sent from the simulator + The which originated the packet + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Raised when the simulator sends us data containing + an agents animation playlist + + + Raised when the simulator sends us data containing + the appearance information for an agent + + + Raised when the simulator sends us data containing + agent names/id values + + + Raised when the simulator sends us data containing + the interests listed in an agents profile + + + Raised when the simulator sends us data containing + profile property information for an agent + + + Raised when the simulator sends us data containing + the group membership an agent is a member of + + + Raised when the simulator sends us data containing + name/id pair + + + Raised when the simulator sends us data containing + the objects and effect when an agent is pointing at + + + Raised when the simulator sends us data containing + the objects and effect when an agent is looking at + + + Raised when the simulator sends us data containing + an agents viewer effect information + + + Raised when the simulator sends us data containing + the top picks from an agents profile + + + Raised when the simulator sends us data containing + the Pick details + + + Raised when the simulator sends us data containing + the classified ads an agent has placed + + + Raised when the simulator sends us data containing + the details of a classified ad + + + Provides data for the event + The event occurs when the simulator sends + the animation playlist for an agent + + The following code example uses the and + properties to display the animation playlist of an avatar on the window. + + // subscribe to the event + Client.Avatars.AvatarAnimation += Avatars_AvatarAnimation; + + private void Avatars_AvatarAnimation(object sender, AvatarAnimationEventArgs e) + { + // create a dictionary of "known" animations from the Animations class using System.Reflection + Dictionary<UUID, string> systemAnimations = new Dictionary<UUID, string>(); + Type type = typeof(Animations); + System.Reflection.FieldInfo[] fields = type.GetFields(System.Reflection.BindingFlags.Public | System.Reflection.BindingFlags.Static); + foreach (System.Reflection.FieldInfo field in fields) + { + systemAnimations.Add((UUID)field.GetValue(type), field.Name); + } + + // find out which animations being played are known animations and which are assets + foreach (Animation animation in e.Animations) + { + if (systemAnimations.ContainsKey(animation.AnimationID)) + { + Console.WriteLine("{0} is playing {1} ({2}) sequence {3}", e.AvatarID, + systemAnimations[animation.AnimationID], animation.AnimationSequence); + } + else + { + Console.WriteLine("{0} is playing {1} (Asset) sequence {2}", e.AvatarID, + animation.AnimationID, animation.AnimationSequence); + } + } + } + + + + + + Construct a new instance of the AvatarAnimationEventArgs class + + The ID of the agent + The list of animations to start + + + Get the ID of the agent + + + Get the list of animations to start + + + Provides data for the event + The event occurs when the simulator sends + the appearance data for an avatar + + The following code example uses the and + properties to display the selected shape of an avatar on the window. + + // subscribe to the event + Client.Avatars.AvatarAppearance += Avatars_AvatarAppearance; + + // handle the data when the event is raised + void Avatars_AvatarAppearance(object sender, AvatarAppearanceEventArgs e) + { + Console.WriteLine("The Agent {0} is using a {1} shape.", e.AvatarID, (e.VisualParams[31] > 0) : "male" ? "female") + } + + + + + + Construct a new instance of the AvatarAppearanceEventArgs class + + The ID of the agent + true of the agent is a trial account + The default agent texture + The agents appearance layer textures + The for the agent + + + Get the ID of the agent + + + true if the agent is a trial account + + + Get the default agent texture + + + Get the agents appearance layer textures + + + Get the for the agent + + + Represents the interests from the profile of an agent + + + Get the ID of the agent + + + The properties of an agent + + + Get the ID of the agent + + + Get the ID of the agent + + + Get the ID of the agent + + + Get the ID of the avatar + + + + Sent to the client to indicate a teleport request has completed + + + + The of the agent + + + + + + The simulators handle the agent teleported to + + + A Uri which contains a list of Capabilities the simulator supports + + + Indicates the level of access required + to access the simulator, or the content rating, or the simulators + map status + + + The IP Address of the simulator + + + The UDP Port the simulator will listen for UDP traffic on + + + Status flags indicating the state of the Agent upon arrival, Flying, etc. + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Sent to the viewer when a neighboring simulator is requesting the agent make a connection to it. + + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + A message sent to the client which indicates a teleport request has failed + and contains some information on why it failed + + + + + + + A string key of the reason the teleport failed e.g. CouldntTPCloser + Which could be used to look up a value in a dictionary or enum + + + The of the Agent + + + A string human readable message containing the reason + An example: Could not teleport closer to destination + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Contains a list of prim owner information for a specific parcel in a simulator + + + A Simulator will always return at least 1 entry + If agent does not have proper permission the OwnerID will be UUID.Zero + If agent does not have proper permission OR there are no primitives on parcel + the DataBlocksExtended map will not be sent from the simulator + + + + An Array of objects + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Prim ownership information for a specified owner on a single parcel + + + + The of the prim owner, + UUID.Zero if agent has no permission to view prim owner information + + + The total number of prims + + + True if the OwnerID is a + + + True if the owner is online + This is no longer used by the LL Simulators + + + The date the most recent prim was rezzed + + + + The details of a single parcel in a region, also contains some regionwide globals + + + + Simulator-local ID of this parcel + + + Maximum corner of the axis-aligned bounding box for this + parcel + + + Minimum corner of the axis-aligned bounding box for this + parcel + + + Total parcel land area + + + + + + Key of authorized buyer + + + Bitmap describing land layout in 4x4m squares across the + entire region + + + + + + Date land was claimed + + + Appears to always be zero + + + Parcel Description + + + + + + + + + Total number of primitives owned by the parcel group on + this parcel + + + Whether the land is deeded to a group or not + + + + + + Maximum number of primitives this parcel supports + + + The Asset UUID of the Texture which when applied to a + primitive will display the media + + + A URL which points to any Quicktime supported media type + + + A byte, if 0x1 viewer should auto scale media to fit object + + + URL For Music Stream + + + Parcel Name + + + Autoreturn value in minutes for others' objects + + + + + + Total number of other primitives on this parcel + + + UUID of the owner of this parcel + + + Total number of primitives owned by the parcel owner on + this parcel + + + + + + How long is pass valid for + + + Price for a temporary pass + + + + + + + + + + + + This field is no longer used + + + The result of a request for parcel properties + + + Sale price of the parcel, only useful if ForSale is set + The SalePrice will remain the same after an ownership + transfer (sale), so it can be used to see the purchase price after + a sale if the new owner has not changed it + + + + Number of primitives your avatar is currently + selecting and sitting on in this parcel + + + + + + + + A number which increments by 1, starting at 0 for each ParcelProperties request. + Can be overriden by specifying the sequenceID with the ParcelPropertiesRequest being sent. + a Negative number indicates the action in has occurred. + + + + Maximum primitives across the entire simulator + + + Total primitives across the entire simulator + + + + + + Key of parcel snapshot + + + Parcel ownership status + + + Total number of primitives on this parcel + + + + + + + + + TRUE of region denies access to age unverified users + + + A description of the media + + + An Integer which represents the height of the media + + + An integer which represents the width of the media + + + A boolean, if true the viewer should loop the media + + + A string which contains the mime type of the media + + + true to obscure (hide) media url + + + true to obscure (hide) music url + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + A message sent from the viewer to the simulator to updated a specific parcels settings + + + The of the agent authorized to purchase this + parcel of land or a NULL if the sale is authorized to anyone + + + true to enable auto scaling of the parcel media + + + The category of this parcel used when search is enabled to restrict + search results + + + A string containing the description to set + + + The of the which allows for additional + powers and restrictions. + + + The which specifies how avatars which teleport + to this parcel are handled + + + The LocalID of the parcel to update settings on + + + A string containing the description of the media which can be played + to visitors + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Deserialize the message + + An containing the data + + + + Serialize the object + + An containing the objects data + + + Base class used for the RemoteParcelRequest message + + + + A message sent from the viewer to the simulator to request information + on a remote parcel + + + + Local sim position of the parcel we are looking up + + + Region handle of the parcel we are looking up + + + Region of the parcel we are looking up + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + A message sent from the simulator to the viewer in response to a + which will contain parcel information + + + + The grid-wide unique parcel ID + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + A message containing a request for a remote parcel from a viewer, or a response + from the simulator to that request + + + + The request or response details block + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + A message sent from the simulator to an agent which contains + the groups the agent is in + + + + The Agent receiving the message + + + An array containing information + for each the agent is a member of + + + An array containing information + for each the agent is a member of + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + Group Details specific to the agent + + + true of the agent accepts group notices + + + The agents tier contribution to the group + + + The Groups + + + The of the groups insignia + + + The name of the group + + + The aggregate permissions the agent has in the group for all roles the agent + is assigned + + + An optional block containing additional agent specific information + + + true of the agent allows this group to be + listed in their profile + + + + A message sent from the viewer to the simulator which + specifies the language and permissions for others to detect + the language specified + + + + A string containng the default language + to use for the agent + + + true of others are allowed to + know the language setting + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + An EventQueue message sent from the simulator to an agent when the agent + leaves a group + + + + + An Array containing the AgentID and GroupID + + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + An object containing the Agents UUID, and the Groups UUID + + + The ID of the Agent leaving the group + + + The GroupID the Agent is leaving + + + Base class for Asset uploads/results via Capabilities + + + + The request state + + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + A message sent from the viewer to the simulator to request a temporary upload capability + which allows an asset to be uploaded + + + + The Capability URL sent by the simulator to upload the baked texture to + + + + A message sent from the simulator that will inform the agent the upload is complete, + and the UUID of the uploaded asset + + + + The uploaded texture asset ID + + + + A message sent from the viewer to the simulator to request a temporary + capability URI which is used to upload an agents baked appearance textures + + + + Object containing request or response + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + A message sent from the simulator which indicates the minimum version required for + using voice chat + + + + Major Version Required + + + Minor version required + + + The name of the region sending the version requrements + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + A message sent from the simulator to the viewer containing the + voice server URI + + + + The Parcel ID which the voice server URI applies + + + The name of the region + + + A uri containing the server/channel information + which the viewer can utilize to participate in voice conversations + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + + + + + + + + + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + A message sent by the viewer to the simulator to request a temporary + capability for a script contained with in a Tasks inventory to be updated + + + + Object containing request or response + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + A message sent from the simulator to the viewer to indicate + a Tasks scripts status. + + + + The Asset ID of the script + + + True of the script is compiled/ran using the mono interpreter, false indicates it + uses the older less efficient lsl2 interprter + + + The Task containing the scripts + + + true of the script is in a running state + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + A message containing the request/response used for updating a gesture + contained with an agents inventory + + + + Object containing request or response + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + A message request/response which is used to update a notecard contained within + a tasks inventory + + + + The of the Task containing the notecard asset to update + + + The notecard assets contained in the tasks inventory + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + A reusable class containing a message sent from the viewer to the simulator to request a temporary uploader capability + which is used to update an asset in an agents inventory + + + + + The Notecard AssetID to replace + + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + A message containing the request/response used for updating a notecard + contained with an agents inventory + + + + Object containing request or response + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + A message sent from the simulator to the viewer which indicates + an error occurred while attempting to update a script in an agents or tasks + inventory + + + + true of the script was successfully compiled by the simulator + + + A string containing the error which occured while trying + to update the script + + + A new AssetID assigned to the script + + + + A message sent from the viewer to the simulator + requesting the update of an existing script contained + within a tasks inventory + + + + if true, set the script mode to running + + + The scripts InventoryItem ItemID to update + + + A lowercase string containing either "mono" or "lsl2" which + specifies the script is compiled and ran on the mono runtime, or the older + lsl runtime + + + The tasks which contains the script to update + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + A message containing either the request or response used in updating a script inside + a tasks inventory + + + + Object containing request or response + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Response from the simulator to notify the viewer the upload is completed, and + the UUID of the script asset and its compiled status + + + + The uploaded texture asset ID + + + true of the script was compiled successfully + + + + A message sent from a viewer to the simulator requesting a temporary uploader capability + used to update a script contained in an agents inventory + + + + The existing asset if of the script in the agents inventory to replace + + + The language of the script + Defaults to lsl version 2, "mono" might be another possible option + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + A message containing either the request or response used in updating a script inside + an agents inventory + + + + Object containing request or response + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + Base class for Map Layers via Capabilities + + + + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Sent by an agent to the capabilities server to request map layers + + + + + A message sent from the simulator to the viewer which contains an array of map images and their grid coordinates + + + + An array containing LayerData items + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + An object containing map location details + + + + The Asset ID of the regions tile overlay + + + The grid location of the southern border of the map tile + + + The grid location of the western border of the map tile + + + The grid location of the eastern border of the map tile + + + The grid location of the northern border of the map tile + + + Object containing request or response + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + New as of 1.23 RC1, no details yet. + + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + A string containing the method used + + + + A request sent from an agent to the Simulator to begin a new conference. + Contains a list of Agents which will be included in the conference + + + + An array containing the of the agents invited to this conference + + + The conferences Session ID + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + A moderation request sent from a conference moderator + Contains an agent and an optional action to take + + + + The Session ID + + + + + + A list containing Key/Value pairs, known valid values: + key: text value: true/false - allow/disallow specified agents ability to use text in session + key: voice value: true/false - allow/disallow specified agents ability to use voice in session + + "text" or "voice" + + + + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + A message sent from the agent to the simulator which tells the + simulator we've accepted a conference invitation + + + + The conference SessionID + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + Key of sender + + + Name of sender + + + Key of destination avatar + + + ID of originating estate + + + Key of originating region + + + Coordinates in originating region + + + Instant message type + + + Group IM session toggle + + + Key of IM session, for Group Messages, the groups UUID + + + Timestamp of the instant message + + + Instant message text + + + Whether this message is held for offline avatars + + + Context specific packed data + + + Is this invitation for voice group/conference chat + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Sent from the simulator to the viewer. + + When an agent initially joins a session the AgentUpdatesBlock object will contain a list of session members including + a boolean indicating they can use voice chat in this session, a boolean indicating they are allowed to moderate + this session, and lastly a string which indicates another agent is entering the session with the Transition set to "ENTER" + + During the session lifetime updates on individuals are sent. During the update the booleans sent during the initial join are + excluded with the exception of the Transition field. This indicates a new user entering or exiting the session with + the string "ENTER" or "LEAVE" respectively. + + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + An EventQueue message sent when the agent is forcibly removed from a chatterbox session + + + + + A string containing the reason the agent was removed + + + + + The ChatterBoxSession's SessionID + + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + + + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + A message sent from the viewer to the simulator which + specifies that the user has changed current URL + of the specific media on a prim face + + + + + New URL + + + + + Prim UUID where navigation occured + + + + + Face index + + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + Base class used for the ObjectMedia message + + + + Message used to retrive prim media data + + + + + Prim UUID + + + + + Requested operation, either GET or UPDATE + + + + + Serialize object + + Serialized object as OSDMap + + + + Deserialize the message + + An containing the data + + + + Message used to update prim media data + + + + + Prim UUID + + + + + Array of media entries indexed by face number + + + + + Media version string + + + + + Serialize object + + Serialized object as OSDMap + + + + Deserialize the message + + An containing the data + + + + Message used to update prim media data + + + + + Prim UUID + + + + + Array of media entries indexed by face number + + + + + Requested operation, either GET or UPDATE + + + + + Serialize object + + Serialized object as OSDMap + + + + Deserialize the message + + An containing the data + + + + Message for setting or getting per face MediaEntry + + + + The request or response details block + + + + Serialize the object + + An containing the objects data + + + + Deserialize the message + + An containing the data + + + + Represents a texture + + + + A object containing image data + + + + + + + + + Initializes a new instance of an AssetTexture object + + + + Initializes a new instance of an AssetTexture object + + A unique specific to this asset + A byte array containing the raw asset data + + + + Initializes a new instance of an AssetTexture object + + A object containing texture data + + + + Populates the byte array with a JPEG2000 + encoded image created from the data in + + + + + Decodes the JPEG2000 data in AssetData to the + object + + True if the decoding was successful, otherwise false + + + + Decodes the begin and end byte positions for each quality layer in + the image + + + + + Override the base classes AssetType + + + + Add a custom decoder callback + + The key of the field to decode + The custom decode handler + + + + Remove a custom decoder callback + + The key of the field to decode + The custom decode handler + + + + Creates a formatted string containing the values of a Packet + + The Packet + A formatted string of values of the nested items in the Packet object + + + + Decode an IMessage object into a beautifully formatted string + + The IMessage object + Recursion level (used for indenting) + A formatted string containing the names and values of the source object + + + + A custom decoder callback + + The key of the object + the data to decode + A string represending the fieldData + + + + Static helper functions and global variables + + + + This header flag signals that ACKs are appended to the packet + + + This header flag signals that this packet has been sent before + + + This header flags signals that an ACK is expected for this packet + + + This header flag signals that the message is compressed using zerocoding + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Given an X/Y location in absolute (grid-relative) terms, a region + handle is returned along with the local X/Y location in that region + + The absolute X location, a number such as + 255360.35 + The absolute Y location, a number such as + 255360.35 + The sim-local X position of the global X + position, a value from 0.0 to 256.0 + The sim-local Y position of the global Y + position, a value from 0.0 to 256.0 + A 64-bit region handle that can be used to teleport to + + + + Converts a floating point number to a terse string format used for + transmitting numbers in wearable asset files + + Floating point number to convert to a string + A terse string representation of the input number + + + + Convert a variable length field (byte array) to a string, with a + field name prepended to each line of the output + + If the byte array has unprintable characters in it, a + hex dump will be written instead + The StringBuilder object to write to + The byte array to convert to a string + A field name to prepend to each line of output + + + + Decode a zerocoded byte array, used to decompress packets marked + with the zerocoded flag + + Any time a zero is encountered, the next byte is a count + of how many zeroes to expand. One zero is encoded with 0x00 0x01, + two zeroes is 0x00 0x02, three zeroes is 0x00 0x03, etc. The + first four bytes are copied directly to the output buffer. + + The byte array to decode + The length of the byte array to decode. This + would be the length of the packet up to (but not including) any + appended ACKs + The output byte array to decode to + The length of the output buffer + + + + Encode a byte array with zerocoding. Used to compress packets marked + with the zerocoded flag. Any zeroes in the array are compressed down + to a single zero byte followed by a count of how many zeroes to expand + out. A single zero becomes 0x00 0x01, two zeroes becomes 0x00 0x02, + three zeroes becomes 0x00 0x03, etc. The first four bytes are copied + directly to the output buffer. + + The byte array to encode + The length of the byte array to encode + The output byte array to encode to + The length of the output buffer + + + + Calculates the CRC (cyclic redundancy check) needed to upload inventory. + + Creation date + Sale type + Inventory type + Type + Asset ID + Group ID + Sale price + Owner ID + Creator ID + Item ID + Folder ID + Everyone mask (permissions) + Flags + Next owner mask (permissions) + Group mask (permissions) + Owner mask (permissions) + The calculated CRC + + + + Attempts to load a file embedded in the assembly + + The filename of the resource to load + A Stream for the requested file, or null if the resource + was not successfully loaded + + + + Attempts to load a file either embedded in the assembly or found in + a given search path + + The filename of the resource to load + An optional path that will be searched if + the asset is not found embedded in the assembly + A Stream for the requested file, or null if the resource + was not successfully loaded + + + + Converts a list of primitives to an object that can be serialized + with the LLSD system + + Primitives to convert to a serializable object + An object that can be serialized with LLSD + + + + Deserializes OSD in to a list of primitives + + Structure holding the serialized primitive list, + must be of the SDMap type + A list of deserialized primitives + + + + Converts a struct or class object containing fields only into a key value separated string + + The struct object + A string containing the struct fields as the keys, and the field value as the value separated + + + // Add the following code to any struct or class containing only fields to override the ToString() + // method to display the values of the passed object + + /// Print the struct data as a string + ///A string containing the field name, and field value + public override string ToString() + { + return Helpers.StructToString(this); + } + + + + + + Passed to Logger.Log() to identify the severity of a log entry + + + + No logging information will be output + + + Non-noisy useful information, may be helpful in + debugging a problem + + + A non-critical error occurred. A warning will not + prevent the rest of the library from operating as usual, + although it may be indicative of an underlying issue + + + A critical error has occurred. Generally this will + be followed by the network layer shutting down, although the + stability of the library after an error is uncertain + + + Used for internal testing, this logging level can + generate very noisy (long and/or repetitive) messages. Don't + pass this to the Log() function, use DebugLog() instead. + + + + = + + + Number of times we've received an unknown CAPS exception in series. + + + For exponential backoff on error. + + + + Constants for the archiving module + + + + + The location of the archive control file + + + + + Path for the assets held in an archive + + + + + Path for the prims file + + + + + Path for terrains. Technically these may be assets, but I think it's quite nice to split them out. + + + + + Path for region settings. + + + + + The character the separates the uuid from extension information in an archived asset filename + + + + + Extensions used for asset types in the archive + + + + + + + + + + + + + + + + + + + Thrown when a packet could not be successfully deserialized + + + + + Default constructor + + + + + Constructor that takes an additional error message + + An error message to attach to this exception + + + + The header of a message template packet. Holds packet flags, sequence + number, packet ID, and any ACKs that will be appended at the end of + the packet + + + + + Convert the AckList to a byte array, used for packet serializing + + Reference to the target byte array + Beginning position to start writing to in the byte + array, will be updated with the ending position of the ACK list + + + + + + + + + + + + + + + + + + + + + A block of data in a packet. Packets are composed of one or more blocks, + each block containing one or more fields + + + + + Create a block from a byte array + + Byte array containing the serialized block + Starting position of the block in the byte array. + This will point to the data after the end of the block when the + call returns + + + + Serialize this block into a byte array + + Byte array to serialize this block into + Starting position in the byte array to serialize to. + This will point to the position directly after the end of the + serialized block when the call returns + + + Current length of the data in this packet + + + A generic value, not an actual packet type + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + The avatar has no rights + + + The avatar can see the online status of the target avatar + + + The avatar can see the location of the target avatar on the map + + + The avatar can modify the ojects of the target avatar + + + + This class holds information about an avatar in the friends list. There are two ways + to interface to this class. The first is through the set of boolean properties. This is the typical + way clients of this class will use it. The second interface is through two bitflag properties, + TheirFriendsRights and MyFriendsRights + + + + + Used internally when building the initial list of friends at login time + + System ID of the avatar being prepesented + Rights the friend has to see you online and to modify your objects + Rights you have to see your friend online and to modify their objects + + + + FriendInfo represented as a string + + A string reprentation of both my rights and my friends rights + + + + System ID of the avatar + + + + + full name of the avatar + + + + + True if the avatar is online + + + + + True if the friend can see if I am online + + + + + True if the friend can see me on the map + + + + + True if the freind can modify my objects + + + + + True if I can see if my friend is online + + + + + True if I can see if my friend is on the map + + + + + True if I can modify my friend's objects + + + + + My friend's rights represented as bitmapped flags + + + + + My rights represented as bitmapped flags + + + + + This class is used to add and remove avatars from your friends list and to manage their permission. + + + + The event subscribers. null if no subcribers + + + Raises the FriendOnline event + A FriendInfoEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the FriendOffline event + A FriendInfoEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the FriendRightsUpdate event + A FriendInfoEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the FriendNames event + A FriendNamesEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the FriendshipOffered event + A FriendshipOfferedEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the FriendshipResponse event + A FriendshipResponseEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the FriendshipTerminated event + A FriendshipTerminatedEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the FriendFoundReply event + A FriendFoundReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + + A dictionary of key/value pairs containing known friends of this avatar. + + The Key is the of the friend, the value is a + object that contains detailed information including permissions you have and have given to the friend + + + + + A Dictionary of key/value pairs containing current pending frienship offers. + + The key is the of the avatar making the request, + the value is the of the request which is used to accept + or decline the friendship offer + + + + + Internal constructor + + A reference to the GridClient Object + + + + Accept a friendship request + + agentID of avatatar to form friendship with + imSessionID of the friendship request message + + + + Decline a friendship request + + of friend + imSessionID of the friendship request message + + + + Overload: Offer friendship to an avatar. + + System ID of the avatar you are offering friendship to + + + + Offer friendship to an avatar. + + System ID of the avatar you are offering friendship to + A message to send with the request + + + + Terminate a friendship with an avatar + + System ID of the avatar you are terminating the friendship with + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + + Change the rights of a friend avatar. + + the of the friend + the new rights to give the friend + This method will implicitly set the rights to those passed in the rights parameter. + + + + Use to map a friends location on the grid. + + Friends UUID to find + + + + + Use to track a friends movement on the grid + + Friends Key + + + + Ask for a notification of friend's online status + + Friend's UUID + + + + This handles the asynchronous response of a RequestAvatarNames call. + + + names cooresponding to the the list of IDs sent the the RequestAvatarNames call. + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + + Populate FriendList with data from the login reply + + true if login was successful + true if login request is requiring a redirect + A string containing the response to the login request + A string containing the reason for the request + A object containing the decoded + reply from the login server + + + Raised when the simulator sends notification one of the members in our friends list comes online + + + Raised when the simulator sends notification one of the members in our friends list goes offline + + + Raised when the simulator sends notification one of the members in our friends list grants or revokes permissions + + + Raised when the simulator sends us the names on our friends list + + + Raised when the simulator sends notification another agent is offering us friendship + + + Raised when a request we sent to friend another agent is accepted or declined + + + Raised when the simulator sends notification one of the members in our friends list has terminated + our friendship + + + Raised when the simulator sends the location of a friend we have + requested map location info for + + + Contains information on a member of our friends list + + + + Construct a new instance of the FriendInfoEventArgs class + + The FriendInfo + + + Get the FriendInfo + + + Contains Friend Names + + + + Construct a new instance of the FriendNamesEventArgs class + + A dictionary where the Key is the ID of the Agent, + and the Value is a string containing their name + + + A dictionary where the Key is the ID of the Agent, + and the Value is a string containing their name + + + Sent when another agent requests a friendship with our agent + + + + Construct a new instance of the FriendshipOfferedEventArgs class + + The ID of the agent requesting friendship + The name of the agent requesting friendship + The ID of the session, used in accepting or declining the + friendship offer + + + Get the ID of the agent requesting friendship + + + Get the name of the agent requesting friendship + + + Get the ID of the session, used in accepting or declining the + friendship offer + + + A response containing the results of our request to form a friendship with another agent + + + + Construct a new instance of the FriendShipResponseEventArgs class + + The ID of the agent we requested a friendship with + The name of the agent we requested a friendship with + true if the agent accepted our friendship offer + + + Get the ID of the agent we requested a friendship with + + + Get the name of the agent we requested a friendship with + + + true if the agent accepted our friendship offer + + + Contains data sent when a friend terminates a friendship with us + + + + Construct a new instance of the FrindshipTerminatedEventArgs class + + The ID of the friend who terminated the friendship with us + The name of the friend who terminated the friendship with us + + + Get the ID of the agent that terminated the friendship with us + + + Get the name of the agent that terminated the friendship with us + + + + Data sent in response to a request which contains the information to allow us to map the friends location + + + + + Construct a new instance of the FriendFoundReplyEventArgs class + + The ID of the agent we have requested location information for + The region handle where our friend is located + The simulator local position our friend is located + + + Get the ID of the agent we have received location information for + + + Get the region handle where our mapped friend is located + + + Get the simulator local position where our friend is located + + + + + + Looking direction, must be a normalized vector + Up direction, must be a normalized vector + + + + Align the coordinate frame X and Y axis with a given rotation + around the Z axis in radians + + Absolute rotation around the Z axis in + radians + + + Origin position of this coordinate frame + + + X axis of this coordinate frame, or Forward/At in grid terms + + + Y axis of this coordinate frame, or Left in grid terms + + + Z axis of this coordinate frame, or Up in grid terms + + + + Throttles the network traffic for various different traffic types. + Access this class through GridClient.Throttle + + + + + Default constructor, uses a default high total of 1500 KBps (1536000) + + + + + Constructor that decodes an existing AgentThrottle packet in to + individual values + + Reference to the throttle data in an AgentThrottle + packet + Offset position to start reading at in the + throttle data + This is generally not needed in clients as the server will + never send a throttle packet to the client + + + + Send an AgentThrottle packet to the current server using the + current values + + + + + Send an AgentThrottle packet to the specified server using the + current values + + + + + Convert the current throttle values to a byte array that can be put + in an AgentThrottle packet + + Byte array containing all the throttle values + + + Maximum bits per second for resending unacknowledged packets + + + Maximum bits per second for LayerData terrain + + + Maximum bits per second for LayerData wind data + + + Maximum bits per second for LayerData clouds + + + Unknown, includes object data + + + Maximum bits per second for textures + + + Maximum bits per second for downloaded assets + + + Maximum bits per second the entire connection, divided up + between invidiual streams using default multipliers + + + + Permission request flags, asked when a script wants to control an Avatar + + + + Placeholder for empty values, shouldn't ever see this + + + Script wants ability to take money from you + + + Script wants to take camera controls for you + + + Script wants to remap avatars controls + + + Script wants to trigger avatar animations + This function is not implemented on the grid + + + Script wants to attach or detach the prim or primset to your avatar + + + Script wants permission to release ownership + This function is not implemented on the grid + The concept of "public" objects does not exist anymore. + + + Script wants ability to link/delink with other prims + + + Script wants permission to change joints + This function is not implemented on the grid + + + Script wants permissions to change permissions + This function is not implemented on the grid + + + Script wants to track avatars camera position and rotation + + + Script wants to control your camera + + + + Special commands used in Instant Messages + + + + Indicates a regular IM from another agent + + + Simple notification box with an OK button + + + You've been invited to join a group. + + + Inventory offer + + + Accepted inventory offer + + + Declined inventory offer + + + Group vote + + + An object is offering its inventory + + + Accept an inventory offer from an object + + + Decline an inventory offer from an object + + + Unknown + + + Start a session, or add users to a session + + + Start a session, but don't prune offline users + + + Start a session with your group + + + Start a session without a calling card (finder or objects) + + + Send a message to a session + + + Leave a session + + + Indicates that the IM is from an object + + + Sent an IM to a busy user, this is the auto response + + + Shows the message in the console and chat history + + + Send a teleport lure + + + Response sent to the agent which inititiated a teleport invitation + + + Response sent to the agent which inititiated a teleport invitation + + + Only useful if you have Linden permissions + + + A placeholder type for future expansion, currently not + used + + + IM to tell the user to go to an URL + + + IM for help + + + IM sent automatically on call for help, sends a lure + to each Helper reached + + + Like an IM but won't go to email + + + IM from a group officer to all group members + + + Unknown + + + Unknown + + + Accept a group invitation + + + Decline a group invitation + + + Unknown + + + An avatar is offering you friendship + + + An avatar has accepted your friendship offer + + + An avatar has declined your friendship offer + + + Indicates that a user has started typing + + + Indicates that a user has stopped typing + + + + Flag in Instant Messages, whether the IM should be delivered to + offline avatars as well + + + + Only deliver to online avatars + + + If the avatar is offline the message will be held until + they login next, and possibly forwarded to their e-mail account + + + + Conversion type to denote Chat Packet types in an easier-to-understand format + + + + Whisper (5m radius) + + + Normal chat (10/20m radius), what the official viewer typically sends + + + Shouting! (100m radius) + + + Event message when an Avatar has begun to type + + + Event message when an Avatar has stopped typing + + + Send the message to the debug channel + + + Event message when an object uses llOwnerSay + + + Special value to support llRegionSay, never sent to the client + + + + Identifies the source of a chat message + + + + Chat from the grid or simulator + + + Chat from another avatar + + + Chat from an object + + + + + + + + + + + + + + + + + + Effect type used in ViewerEffect packets + + + + + + + + + + + + + + + + + + + + + + + + + Project a beam from a source to a destination, such as + the one used when editing an object + + + + + + + + + + + + Create a swirl of particles around an object + + + + + + + + + Cause an avatar to look at an object + + + Cause an avatar to point at an object + + + + The action an avatar is doing when looking at something, used in + ViewerEffect packets for the LookAt effect + + + + + + + + + + + + + + + + + + + + + + Deprecated + + + + + + + + + + + + + + + + The action an avatar is doing when pointing at something, used in + ViewerEffect packets for the PointAt effect + + + + + + + + + + + + + + + + + Money transaction types + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Flags sent when a script takes or releases a control + + NOTE: (need to verify) These might be a subset of the ControlFlags enum in Movement, + + + No Flags set + + + Forward (W or up Arrow) + + + Back (S or down arrow) + + + Move left (shift+A or left arrow) + + + Move right (shift+D or right arrow) + + + Up (E or PgUp) + + + Down (C or PgDown) + + + Rotate left (A or left arrow) + + + Rotate right (D or right arrow) + + + Left Mouse Button + + + Left Mouse button in MouseLook + + + + Currently only used to hide your group title + + + + No flags set + + + Hide your group title + + + + Action state of the avatar, which can currently be typing and + editing + + + + + + + + + + + + + + Current teleport status + + + + Unknown status + + + Teleport initialized + + + Teleport in progress + + + Teleport failed + + + Teleport completed + + + Teleport cancelled + + + + + + + + No flags set, or teleport failed + + + Set when newbie leaves help island for first time + + + + + + Via Lure + + + Via Landmark + + + Via Location + + + Via Home + + + Via Telehub + + + Via Login + + + Linden Summoned + + + Linden Forced me + + + + + + Agent Teleported Home via Script + + + + + + + + + + + + forced to new location for example when avatar is banned or ejected + + + Teleport Finished via a Lure + + + Finished, Sim Changed + + + Finished, Same Sim + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Instant Message + + + + Key of sender + + + Name of sender + + + Key of destination avatar + + + ID of originating estate + + + Key of originating region + + + Coordinates in originating region + + + Instant message type + + + Group IM session toggle + + + Key of IM session, for Group Messages, the groups UUID + + + Timestamp of the instant message + + + Instant message text + + + Whether this message is held for offline avatars + + + Context specific packed data + + + Print the struct data as a string + A string containing the field name, and field value + + + + + + + + + Construct a new instance of the ChatEventArgs object + + Sim from which the message originates + The message sent + The audible level of the message + The type of message sent: whisper, shout, etc + The source type of the message sender + The name of the agent or object sending the message + The ID of the agent or object sending the message + The ID of the object owner, or the agent ID sending the message + The position of the agent or object sending the message + + + Get the simulator sending the message + + + Get the message sent + + + Get the audible level of the message + + + Get the type of message sent: whisper, shout, etc + + + Get the source type of the message sender + + + Get the name of the agent or object sending the message + + + Get the ID of the agent or object sending the message + + + Get the ID of the object owner, or the agent ID sending the message + + + Get the position of the agent or object sending the message + + + Contains the data sent when a primitive opens a dialog with this agent + + + + Construct a new instance of the ScriptDialogEventArgs + + The dialog message + The name of the object that sent the dialog request + The ID of the image to be displayed + The ID of the primitive sending the dialog + The first name of the senders owner + The last name of the senders owner + The communication channel the dialog was sent on + The string labels containing the options presented in this dialog + + + Get the dialog message + + + Get the name of the object that sent the dialog request + + + Get the ID of the image to be displayed + + + Get the ID of the primitive sending the dialog + + + Get the first name of the senders owner + + + Get the last name of the senders owner + + + Get the communication channel the dialog was sent on, responses + should also send responses on this same channel + + + Get the string labels containing the options presented in this dialog + + + Contains the data sent when a primitive requests debit or other permissions + requesting a YES or NO answer + + + + Construct a new instance of the ScriptQuestionEventArgs + + The simulator containing the object sending the request + The ID of the script making the request + The ID of the primitive containing the script making the request + The name of the primitive making the request + The name of the owner of the object making the request + The permissions being requested + + + Get the simulator containing the object sending the request + + + Get the ID of the script making the request + + + Get the ID of the primitive containing the script making the request + + + Get the name of the primitive making the request + + + Get the name of the owner of the object making the request + + + Get the permissions being requested + + + Contains the data sent when a primitive sends a request + to an agent to open the specified URL + + + + Construct a new instance of the LoadUrlEventArgs + + The name of the object sending the request + The ID of the object sending the request + The ID of the owner of the object sending the request + True if the object is owned by a group + The message sent with the request + The URL the object sent + + + Get the name of the object sending the request + + + Get the ID of the object sending the request + + + Get the ID of the owner of the object sending the request + + + True if the object is owned by a group + + + Get the message sent with the request + + + Get the URL the object sent + + + The date received from an ImprovedInstantMessage + + + + Construct a new instance of the InstantMessageEventArgs object + + the InstantMessage object + the simulator where the InstantMessage origniated + + + Get the InstantMessage object + + + Get the simulator where the InstantMessage origniated + + + Contains the currency balance + + + + Construct a new BalanceEventArgs object + + The currenct balance + + + + Get the currenct balance + + + + Contains the transaction summary when an item is purchased, + money is given, or land is purchased + + + + Construct a new instance of the MoneyBalanceReplyEventArgs object + + The ID of the transaction + True of the transaction was successful + The current currency balance + The meters credited + The meters comitted + A brief description of the transaction + + + Get the ID of the transaction + + + True of the transaction was successful + + + Get the remaining currency balance + + + Get the meters credited + + + Get the meters comitted + + + Get the description of the transaction + + + Data sent from the simulator containing information about your agent and active group information + + + + Construct a new instance of the AgentDataReplyEventArgs object + + The agents first name + The agents last name + The agents active group ID + The group title of the agents active group + The combined group powers the agent has in the active group + The name of the group the agent has currently active + + + Get the agents first name + + + Get the agents last name + + + Get the active group ID of your agent + + + Get the active groups title of your agent + + + Get the combined group powers of your agent + + + Get the active group name of your agent + + + Data sent by the simulator to indicate the active/changed animations + applied to your agent + + + + Construct a new instance of the AnimationsChangedEventArgs class + + The dictionary that contains the changed animations + + + Get the dictionary that contains the changed animations + + + + Data sent from a simulator indicating a collision with your agent + + + + + Construct a new instance of the MeanCollisionEventArgs class + + The type of collision that occurred + The ID of the agent or object that perpetrated the agression + The ID of the Victim + The strength of the collision + The Time the collision occurred + + + Get the Type of collision + + + Get the ID of the agent or object that collided with your agent + + + Get the ID of the agent that was attacked + + + A value indicating the strength of the collision + + + Get the time the collision occurred + + + Data sent to your agent when it crosses region boundaries + + + + Construct a new instance of the RegionCrossedEventArgs class + + The simulator your agent just left + The simulator your agent is now in + + + Get the simulator your agent just left + + + Get the simulator your agent is now in + + + Data sent from the simulator when your agent joins a group chat session + + + + Construct a new instance of the GroupChatJoinedEventArgs class + + The ID of the session + The name of the session + A temporary session id used for establishing new sessions + True of your agent successfully joined the session + + + Get the ID of the group chat session + + + Get the name of the session + + + Get the temporary session ID used for establishing new sessions + + + True if your agent successfully joined the session + + + The session information when your agent exits a group chat session + + + + Construct a new instance of the GroupChatLeftEventArgs class + + The ID of the session your agent left + + + Get the ID of the session your agent left + + + Data sent by the simulator containing urgent messages + + + + Construct a new instance of the AlertMessageEventArgs class + + The alert message + + + Get the alert message + + + Data sent by a script requesting to take or release specified controls to your agent + + + + Construct a new instance of the ScriptControlEventArgs class + + The controls the script is attempting to take or release to the agent + True if the script is passing controls back to the agent + True if the script is requesting controls be released to the script + + + Get the controls the script is attempting to take or release to the agent + + + True if the script is passing controls back to the agent + + + True if the script is requesting controls be released to the script + + + + Data sent from the simulator to an agent to indicate its view limits + + + + + Construct a new instance of the CameraConstraintEventArgs class + + The collision plane + + + Get the collision plane + + + + Data containing script sensor requests which allow an agent to know the specific details + of a primitive sending script sensor requests + + + + + Construct a new instance of the ScriptSensorReplyEventArgs + + The ID of the primitive sending the sensor + The ID of the group associated with the primitive + The name of the primitive sending the sensor + The ID of the primitive sending the sensor + The ID of the owner of the primitive sending the sensor + The position of the primitive sending the sensor + The range the primitive specified to scan + The rotation of the primitive sending the sensor + The type of sensor the primitive sent + The velocity of the primitive sending the sensor + + + Get the ID of the primitive sending the sensor + + + Get the ID of the group associated with the primitive + + + Get the name of the primitive sending the sensor + + + Get the ID of the primitive sending the sensor + + + Get the ID of the owner of the primitive sending the sensor + + + Get the position of the primitive sending the sensor + + + Get the range the primitive specified to scan + + + Get the rotation of the primitive sending the sensor + + + Get the type of sensor the primitive sent + + + Get the velocity of the primitive sending the sensor + + + Contains the response data returned from the simulator in response to a + + + Construct a new instance of the AvatarSitResponseEventArgs object + + + Get the ID of the primitive the agent will be sitting on + + + True if the simulator Autopilot functions were involved + + + Get the camera offset of the agent when seated + + + Get the camera eye offset of the agent when seated + + + True of the agent will be in mouselook mode when seated + + + Get the position of the agent when seated + + + Get the rotation of the agent when seated + + + Data sent when an agent joins a chat session your agent is currently participating in + + + + Construct a new instance of the ChatSessionMemberAddedEventArgs object + + The ID of the chat session + The ID of the agent joining + + + Get the ID of the chat session + + + Get the ID of the agent that joined + + + Data sent when an agent exits a chat session your agent is currently participating in + + + + Construct a new instance of the ChatSessionMemberLeftEventArgs object + + The ID of the chat session + The ID of the Agent that left + + + Get the ID of the chat session + + + Get the ID of the agent that left + + + + Identifier code for primitive types + + + + None + + + A Primitive + + + A Avatar + + + Linden grass + + + Linden tree + + + A primitive that acts as the source for a particle stream + + + A Linden tree + + + + Primary parameters for primitives such as Physics Enabled or Phantom + + + + Deprecated + + + Whether physics are enabled for this object + + + + + + + + + + + + + + + + + + + + + Whether this object contains an active touch script + + + + + + Whether this object can receive payments + + + Whether this object is phantom (no collisions) + + + + + + + + + + + + + + + Deprecated + + + + + + + + + + + + Deprecated + + + + + + + + + + + + + + + Server flag, will not be sent to clients. Specifies that + the object is destroyed when it touches a simulator edge + + + Server flag, will not be sent to clients. Specifies that + the object will be returned to the owner's inventory when it + touches a simulator edge + + + Server flag, will not be sent to clients. + + + Server flag, will not be sent to client. Specifies that + the object is hovering/flying + + + + + + + + + + + + + + + + Sound flags for sounds attached to primitives + + + + + + + + + + + + + + + + + + + + + + + + + + Material type for a primitive + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Used in a helper function to roughly determine prim shape + + + + + Extra parameters for primitives, these flags are for features that have + been added after the original ObjectFlags that has all eight bits + reserved already + + + + Whether this object has flexible parameters + + + Whether this object has light parameters + + + Whether this object is a sculpted prim + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Attachment points for objects on avatar bodies + + + Both InventoryObject and InventoryAttachment types can be attached + + + + Right hand if object was not previously attached + + + Chest + + + Skull + + + Left shoulder + + + Right shoulder + + + Left hand + + + Right hand + + + Left foot + + + Right foot + + + Spine + + + Pelvis + + + Mouth + + + Chin + + + Left ear + + + Right ear + + + Left eyeball + + + Right eyeball + + + Nose + + + Right upper arm + + + Right forearm + + + Left upper arm + + + Left forearm + + + Right hip + + + Right upper leg + + + Right lower leg + + + Left hip + + + Left upper leg + + + Left lower leg + + + Stomach + + + Left pectoral + + + Right pectoral + + + HUD Center position 2 + + + HUD Top-right + + + HUD Top + + + HUD Top-left + + + HUD Center + + + HUD Bottom-left + + + HUD Bottom + + + HUD Bottom-right + + + + Tree foliage types + + + + Pine1 tree + + + Oak tree + + + Tropical Bush1 + + + Palm1 tree + + + Dogwood tree + + + Tropical Bush2 + + + Palm2 tree + + + Cypress1 tree + + + Cypress2 tree + + + Pine2 tree + + + Plumeria + + + Winter pinetree1 + + + Winter Aspen tree + + + Winter pinetree2 + + + Eucalyptus tree + + + Fern + + + Eelgrass + + + Sea Sword + + + Kelp1 plant + + + Beach grass + + + Kelp2 plant + + + + Grass foliage types + + + + + + + + + + + + + + + + + + + + + + + Action associated with clicking on an object + + + + Touch object + + + Sit on object + + + Purchase object or contents + + + Pay the object + + + Open task inventory + + + Play parcel media + + + Open parcel media + + + + A set of textures that are layered on texture of each other and "baked" + in to a single texture, for avatar appearances + + + + Final baked texture + + + Component layers + + + Width of the final baked image and scratchpad + + + Height of the final baked image and scratchpad + + + Bake type + + + + Default constructor + + Bake type + + + + Adds layer for baking + + TexturaData struct that contains texture and its params + + + + Converts avatar texture index (face) to Bake type + + Face number (AvatarTextureIndex) + BakeType, layer to which this texture belongs to + + + + Make sure images exist, resize source if needed to match the destination + + Destination image + Source image + Sanitization was succefull + + + + Fills a baked layer as a solid *appearing* color. The colors are + subtly dithered on a 16x16 grid to prevent the JPEG2000 stage from + compressing it too far since it seems to cause upload failures if + the image is a pure solid color + + Color of the base of this layer + + + + Fills a baked layer as a solid *appearing* color. The colors are + subtly dithered on a 16x16 grid to prevent the JPEG2000 stage from + compressing it too far since it seems to cause upload failures if + the image is a pure solid color + + Red value + Green value + Blue value + + + Final baked texture + + + Component layers + + + Width of the final baked image and scratchpad + + + Height of the final baked image and scratchpad + + + Bake type + + + Is this one of the 3 skin bakes + + + The event subscribers. null if no subcribers + + + Raises the LandPatchReceived event + A LandPatchReceivedEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + + Default constructor + + + + + + Retrieve the terrain height at a given coordinate + + The region that the point of interest is in + Sim X coordinate, valid range is from 0 to 255 + Sim Y coordinate, valid range is from 0 to 255 + The terrain height at the given point if the + lookup was successful, otherwise 0.0f + True if the lookup was successful, otherwise false + + + Raised when the simulator responds sends + + + Simulator from that sent tha data + + + Sim coordinate of the patch + + + Sim coordinate of the patch + + + Size of tha patch + + + Heightmap for the patch + + + + The InternalDictionary class is used through the library for storing key/value pairs. + It is intended to be a replacement for the generic Dictionary class and should + be used in its place. It contains several methods for allowing access to the data from + outside the library that are read only and thread safe. + + + Key + Value + + + Internal dictionary that this class wraps around. Do not + modify or enumerate the contents of this dictionary without locking + on this member + + + + Initializes a new instance of the Class + with the specified key/value, has the default initial capacity. + + + + // initialize a new InternalDictionary named testDict with a string as the key and an int as the value. + public InternalDictionary<string, int> testDict = new InternalDictionary<string, int>(); + + + + + + Initializes a new instance of the Class + with the specified key/value, has its initial valies copied from the specified + + + + to copy initial values from + + + // initialize a new InternalDictionary named testAvName with a UUID as the key and an string as the value. + // populates with copied values from example KeyNameCache Dictionary. + + // create source dictionary + Dictionary<UUID, string> KeyNameCache = new Dictionary<UUID, string>(); + KeyNameCache.Add("8300f94a-7970-7810-cf2c-fc9aa6cdda24", "Jack Avatar"); + KeyNameCache.Add("27ba1e40-13f7-0708-3e98-5819d780bd62", "Jill Avatar"); + + // Initialize new dictionary. + public InternalDictionary<UUID, string> testAvName = new InternalDictionary<UUID, string>(KeyNameCache); + + + + + + Initializes a new instance of the Class + with the specified key/value, With its initial capacity specified. + + Initial size of dictionary + + + // initialize a new InternalDictionary named testDict with a string as the key and an int as the value, + // initially allocated room for 10 entries. + public InternalDictionary<string, int> testDict = new InternalDictionary<string, int>(10); + + + + + + Try to get entry from with specified key + + Key to use for lookup + Value returned + if specified key exists, if not found + + + // find your avatar using the Simulator.ObjectsAvatars InternalDictionary: + Avatar av; + if (Client.Network.CurrentSim.ObjectsAvatars.TryGetValue(Client.Self.AgentID, out av)) + Console.WriteLine("Found Avatar {0}", av.Name); + + + + + + + Finds the specified match. + + The match. + Matched value + + + // use a delegate to find a prim in the ObjectsPrimitives InternalDictionary + // with the ID 95683496 + uint findID = 95683496; + Primitive findPrim = sim.ObjectsPrimitives.Find( + delegate(Primitive prim) { return prim.ID == findID; }); + + + + + Find All items in an + return matching items. + a containing found items. + + Find All prims within 20 meters and store them in a List + + int radius = 20; + List<Primitive> prims = Client.Network.CurrentSim.ObjectsPrimitives.FindAll( + delegate(Primitive prim) { + Vector3 pos = prim.Position; + return ((prim.ParentID == 0) && (pos != Vector3.Zero) && (Vector3.Distance(pos, location) < radius)); + } + ); + + + + + Find All items in an + return matching keys. + a containing found keys. + + Find All keys which also exist in another dictionary + + List<UUID> matches = myDict.FindAll( + delegate(UUID id) { + return myOtherDict.ContainsKey(id); + } + ); + + + + + Perform an on each entry in an + to perform + + + // Iterates over the ObjectsPrimitives InternalDictionary and prints out some information. + Client.Network.CurrentSim.ObjectsPrimitives.ForEach( + delegate(Primitive prim) + { + if (prim.Text != null) + { + Console.WriteLine("NAME={0} ID = {1} TEXT = '{2}'", + prim.PropertiesFamily.Name, prim.ID, prim.Text); + } + }); + + + + + Perform an on each key of an + to perform + + + + Perform an on each KeyValuePair of an + + to perform + + + Check if Key exists in Dictionary + Key to check for + if found, otherwise + + + Check if Value exists in Dictionary + Value to check for + if found, otherwise + + + + Adds the specified key to the dictionary, dictionary locking is not performed, + + + The key + The value + + + + Removes the specified key, dictionary locking is not performed + + The key. + if successful, otherwise + + + + Gets the number of Key/Value pairs contained in the + + + + + Indexer for the dictionary + + The key + The value + + + + Avatar group management + + + + Key of Group Member + + + Total land contribution + + + Online status information + + + Abilities that the Group Member has + + + Current group title + + + Is a group owner + + + + Role manager for a group + + + + Key of the group + + + Key of Role + + + Name of Role + + + Group Title associated with Role + + + Description of Role + + + Abilities Associated with Role + + + Returns the role's title + The role's title + + + + Class to represent Group Title + + + + Key of the group + + + ID of the role title belongs to + + + Group Title + + + Whether title is Active + + + Returns group title + + + + Represents a group on the grid + + + + Key of Group + + + Key of Group Insignia + + + Key of Group Founder + + + Key of Group Role for Owners + + + Name of Group + + + Text of Group Charter + + + Title of "everyone" role + + + Is the group open for enrolement to everyone + + + Will group show up in search + + + + + + + + + + + + Is the group Mature + + + Cost of group membership + + + + + + + + + The total number of current members this group has + + + The number of roles this group has configured + + + Show this group in agent's profile + + + Returns the name of the group + A string containing the name of the group + + + + A group Vote + + + + Key of Avatar who created Vote + + + Text of the Vote proposal + + + Total number of votes + + + + A group proposal + + + + The Text of the proposal + + + The minimum number of members that must vote before proposal passes or failes + + + The required ration of yes/no votes required for vote to pass + The three options are Simple Majority, 2/3 Majority, and Unanimous + TODO: this should be an enum + + + The duration in days votes are accepted + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Struct representing a group notice + + + + + + + + + + + + + + + + + + + + + + + Struct representing a group notice list entry + + + + Notice ID + + + Creation timestamp of notice + + + Agent name who created notice + + + Notice subject + + + Is there an attachment? + + + Attachment Type + + + + Struct representing a member of a group chat session and their settings + + + + The of the Avatar + + + True if user has voice chat enabled + + + True of Avatar has moderator abilities + + + True if a moderator has muted this avatars chat + + + True if a moderator has muted this avatars voice + + + + Role update flags + + + + + + + + + + + + + + + + + + + + + + + + + Can send invitations to groups default role + + + Can eject members from group + + + Can toggle 'Open Enrollment' and change 'Signup fee' + + + Member is visible in the public member list + + + Can create new roles + + + Can delete existing roles + + + Can change Role names, titles and descriptions + + + Can assign other members to assigners role + + + Can assign other members to any role + + + Can remove members from roles + + + Can assign and remove abilities in roles + + + Can change group Charter, Insignia, 'Publish on the web' and which + members are publicly visible in group member listings + + + Can buy land or deed land to group + + + Can abandon group owned land to Governor Linden on mainland, or Estate owner for + private estates + + + Can set land for-sale information on group owned parcels + + + Can subdivide and join parcels + + + Can join group chat sessions + + + Can use voice chat in Group Chat sessions + + + Can moderate group chat sessions + + + Can toggle "Show in Find Places" and set search category + + + Can change parcel name, description, and 'Publish on web' settings + + + Can set the landing point and teleport routing on group land + + + Can change music and media settings + + + Can toggle 'Edit Terrain' option in Land settings + + + Can toggle various About Land > Options settings + + + Can always terraform land, even if parcel settings have it turned off + + + Can always fly while over group owned land + + + Can always rez objects on group owned land + + + Can always create landmarks for group owned parcels + + + Can set home location on any group owned parcel + + + Can modify public access settings for group owned parcels + + + Can manager parcel ban lists on group owned land + + + Can manage pass list sales information + + + Can eject and freeze other avatars on group owned land + + + Can return objects set to group + + + Can return non-group owned/set objects + + + Can return group owned objects + + + Can landscape using Linden plants + + + Can deed objects to group + + + Can move group owned objects + + + Can set group owned objects for-sale + + + Pay group liabilities and receive group dividends + + + Can send group notices + + + Can receive group notices + + + Can create group proposals + + + Can vote on group proposals + + + + Handles all network traffic related to reading and writing group + information + + + + The event subscribers. null if no subcribers + + + Raises the CurrentGroups event + A CurrentGroupsEventArgs object containing the + data sent from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the GroupNamesReply event + A GroupNamesEventArgs object containing the + data response from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the GroupProfile event + An GroupProfileEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the GroupMembers event + A GroupMembersEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the GroupRolesDataReply event + A GroupRolesDataReplyEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the GroupRoleMembersReply event + A GroupRolesRoleMembersReplyEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the GroupTitlesReply event + A GroupTitlesReplyEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the GroupAccountSummary event + A GroupAccountSummaryReplyEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the GroupCreated event + An GroupCreatedEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the GroupJoined event + A GroupOperationEventArgs object containing the + result of the operation returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the GroupLeft event + A GroupOperationEventArgs object containing the + result of the operation returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the GroupDropped event + An GroupDroppedEventArgs object containing the + the group your agent left + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the GroupMemberEjected event + An GroupMemberEjectedEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the GroupNoticesListReply event + An GroupNoticesListReplyEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the GroupInvitation event + An GroupInvitationEventArgs object containing the + data returned from the simulator + + + Thread sync lock object + + + A reference to the current instance + + + Currently-active group members requests + + + Currently-active group roles requests + + + Currently-active group role-member requests + + + Dictionary keeping group members while request is in progress + + + Dictionary keeping mebmer/role mapping while request is in progress + + + Dictionary keeping GroupRole information while request is in progress + + + Caches group name lookups + + + + Construct a new instance of the GroupManager class + + A reference to the current instance + + + + Request a current list of groups the avatar is a member of. + + CAPS Event Queue must be running for this to work since the results + come across CAPS. + + + + Lookup name of group based on groupID + + groupID of group to lookup name for. + + + + Request lookup of multiple group names + + List of group IDs to request. + + + Lookup group profile data such as name, enrollment, founder, logo, etc + Subscribe to OnGroupProfile event to receive the results. + group ID (UUID) + + + Request a list of group members. + Subscribe to OnGroupMembers event to receive the results. + group ID (UUID) + UUID of the request, use to index into cache + + + Request group roles + Subscribe to OnGroupRoles event to receive the results. + group ID (UUID) + UUID of the request, use to index into cache + + + Request members (members,role) role mapping for a group. + Subscribe to OnGroupRolesMembers event to receive the results. + group ID (UUID) + UUID of the request, use to index into cache + + + Request a groups Titles + Subscribe to OnGroupTitles event to receive the results. + group ID (UUID) + UUID of the request, use to index into cache + + + Begin to get the group account summary + Subscribe to the OnGroupAccountSummary event to receive the results. + group ID (UUID) + How long of an interval + Which interval (0 for current, 1 for last) + + + Invites a user to a group + The group to invite to + A list of roles to invite a person to + Key of person to invite + + + Set a group as the current active group + group ID (UUID) + + + Change the role that determines your active title + Group ID to use + Role ID to change to + + + Set this avatar's tier contribution + Group ID to change tier in + amount of tier to donate + + + + Save wheather agent wants to accept group notices and list this group in their profile + + Group + Accept notices from this group + List this group in the profile + + + Request to join a group + Subscribe to OnGroupJoined event for confirmation. + group ID (UUID) to join. + + + + Request to create a new group. If the group is successfully + created, L$100 will automatically be deducted + + Subscribe to OnGroupCreated event to receive confirmation. + Group struct containing the new group info + + + Update a group's profile and other information + Groups ID (UUID) to update. + Group struct to update. + + + Eject a user from a group + Group ID to eject the user from + Avatar's key to eject + + + Update role information + Modified role to be updated + + + Create a new group role + Group ID to update + Role to create + + + Delete a group role + Group ID to update + Role to delete + + + Remove an avatar from a role + Group ID to update + Role ID to be removed from + Avatar's Key to remove + + + Assign an avatar to a role + Group ID to update + Role ID to assign to + Avatar's ID to assign to role + + + Request the group notices list + Group ID to fetch notices for + + + Request a group notice by key + ID of group notice + + + Send out a group notice + Group ID to update + GroupNotice structure containing notice data + + + Start a group proposal (vote) + The Group ID to send proposal to + GroupProposal structure containing the proposal + + + Request to leave a group + Subscribe to OnGroupLeft event to receive confirmation + The group to leave + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Raised when the simulator sends us data containing + our current group membership + + + Raised when the simulator responds to a RequestGroupName + or RequestGroupNames request + + + Raised when the simulator responds to a request + + + Raised when the simulator responds to a request + + + Raised when the simulator responds to a request + + + Raised when the simulator responds to a request + + + Raised when the simulator responds to a request + + + Raised when a response to a RequestGroupAccountSummary is returned + by the simulator + + + Raised when a request to create a group is successful + + + Raised when a request to join a group either + fails or succeeds + + + Raised when a request to leave a group either + fails or succeeds + + + Raised when A group is removed from the group server + + + Raised when a request to eject a member from a group either + fails or succeeds + + + Raised when the simulator sends us group notices + + + + Raised when another agent invites our avatar to join a group + + + Contains the current groups your agent is a member of + + + Construct a new instance of the CurrentGroupsEventArgs class + The current groups your agent is a member of + + + Get the current groups your agent is a member of + + + A Dictionary of group names, where the Key is the groups ID and the value is the groups name + + + Construct a new instance of the GroupNamesEventArgs class + The Group names dictionary + + + Get the Group Names dictionary + + + Represents the members of a group + + + + Construct a new instance of the GroupMembersReplyEventArgs class + + The ID of the request + The ID of the group + The membership list of the group + + + Get the ID as returned by the request to correlate + this result set and the request + + + Get the ID of the group + + + Get the dictionary of members + + + Represents the roles associated with a group + + + Construct a new instance of the GroupRolesDataReplyEventArgs class + The ID as returned by the request to correlate + this result set and the request + The ID of the group + The dictionary containing the roles + + + Get the ID as returned by the request to correlate + this result set and the request + + + Get the ID of the group + + + Get the dictionary containing the roles + + + Represents the Role to Member mappings for a group + + + Construct a new instance of the GroupRolesMembersReplyEventArgs class + The ID as returned by the request to correlate + this result set and the request + The ID of the group + The member to roles map + + + Get the ID as returned by the request to correlate + this result set and the request + + + Get the ID of the group + + + Get the member to roles map + + + Represents the titles for a group + + + Construct a new instance of the GroupTitlesReplyEventArgs class + The ID as returned by the request to correlate + this result set and the request + The ID of the group + The titles + + + Get the ID as returned by the request to correlate + this result set and the request + + + Get the ID of the group + + + Get the titles + + + Represents the summary data for a group + + + Construct a new instance of the GroupAccountSummaryReplyEventArgs class + The ID of the group + The summary data + + + Get the ID of the group + + + Get the summary data + + + A response to a group create request + + + Construct a new instance of the GroupCreatedReplyEventArgs class + The ID of the group + the success or faulure of the request + A string containing additional information + + + Get the ID of the group + + + true of the group was created successfully + + + A string containing the message + + + Represents a response to a request + + + Construct a new instance of the GroupOperationEventArgs class + The ID of the group + true of the request was successful + + + Get the ID of the group + + + true of the request was successful + + + Represents your agent leaving a group + + + Construct a new instance of the GroupDroppedEventArgs class + The ID of the group + + + Get the ID of the group + + + Represents a list of active group notices + + + Construct a new instance of the GroupNoticesListReplyEventArgs class + The ID of the group + The list containing active notices + + + Get the ID of the group + + + Get the notices list + + + Represents the profile of a group + + + Construct a new instance of the GroupProfileEventArgs class + The group profile + + + Get the group profile + + + + Provides notification of a group invitation request sent by another Avatar + + The invitation is raised when another avatar makes an offer for our avatar + to join a group. + + + The ID of the Avatar sending the group invitation + + + The name of the Avatar sending the group invitation + + + A message containing the request information which includes + the name of the group, the groups charter and the fee to join details + + + The Simulator + + + Set to true to accept invitation, false to decline + + + + Wrapper around a byte array that allows bit to be packed and unpacked + one at a time or by a variable amount. Useful for very tightly packed + data like LayerData packets + + + + + + + + Default constructor, initialize the bit packer / bit unpacker + with a byte array and starting position + + Byte array to pack bits in to or unpack from + Starting position in the byte array + + + + Pack a floating point value in to the data + + Floating point value to pack + + + + Pack part or all of an integer in to the data + + Integer containing the data to pack + Number of bits of the integer to pack + + + + Pack part or all of an unsigned integer in to the data + + Unsigned integer containing the data to pack + Number of bits of the integer to pack + + + + + + + + + + + + + + + + + + + + + + + + + Unpacking a floating point value from the data + + Unpacked floating point value + + + + Unpack a variable number of bits from the data in to integer format + + Number of bits to unpack + An integer containing the unpacked bits + This function is only useful up to 32 bits + + + + Unpack a variable number of bits from the data in to unsigned + integer format + + Number of bits to unpack + An unsigned integer containing the unpacked bits + This function is only useful up to 32 bits + + + + Unpack a 16-bit signed integer + + 16-bit signed integer + + + + Unpack a 16-bit unsigned integer + + 16-bit unsigned integer + + + + Unpack a 32-bit signed integer + + 32-bit signed integer + + + + Unpack a 32-bit unsigned integer + + 32-bit unsigned integer + + + + + + + + + + Avatar profile flags + + + + + Represents an avatar (other than your own) + + + + Groups that this avatar is a member of + + + Positive and negative ratings + + + Avatar properties including about text, profile URL, image IDs and + publishing settings + + + Avatar interests including spoken languages, skills, and "want to" + choices + + + Movement control flags for avatars. Typically not set or used by + clients. To move your avatar, use Client.Self.Movement instead + + + + Contains the visual parameters describing the deformation of the avatar + + + + + Default constructor + + + + First name + + + Last name + + + Full name + + + Active group + + + + Positive and negative ratings + + + + Positive ratings for Behavior + + + Negative ratings for Behavior + + + Positive ratings for Appearance + + + Negative ratings for Appearance + + + Positive ratings for Building + + + Negative ratings for Building + + + Positive ratings given by this avatar + + + Negative ratings given by this avatar + + + + Avatar properties including about text, profile URL, image IDs and + publishing settings + + + + First Life about text + + + First Life image ID + + + + + + + + + + + + + + + Profile image ID + + + Flags of the profile + + + Web URL for this profile + + + Should this profile be published on the web + + + Avatar Online Status + + + Is this a mature profile + + + + + + + + + + Avatar interests including spoken languages, skills, and "want to" + choices + + + + Languages profile field + + + + + + + + + + + + + + + + Index of TextureEntry slots for avatar appearances + + + + + Bake layers for avatar appearance + + + + Maximum number of concurrent downloads for wearable assets and textures + + + Maximum number of concurrent uploads for baked textures + + + Timeout for fetching inventory listings + + + Timeout for fetching a single wearable, or receiving a single packet response + + + Timeout for fetching a single texture + + + Timeout for uploading a single baked texture + + + Number of times to retry bake upload + + + When changing outfit, kick off rebake after + 20 seconds has passed since the last change + + + Total number of wearables for each avatar + + + Total number of baked textures on each avatar + + + Total number of wearables per bake layer + + + Total number of textures on an avatar, baked or not + + + Mapping between BakeType and AvatarTextureIndex + + + Map of what wearables are included in each bake + + + Magic values to finalize the cache check hashes for each + bake + + + Default avatar texture, used to detect when a custom + texture is not set for a face + + + The event subscribers. null if no subcribers + + + Raises the AgentWearablesReply event + An AgentWearablesReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the CachedBakesReply event + An AgentCachedBakesReplyEventArgs object containing the + data returned from the data server AgentCachedTextureResponse + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the AppearanceSet event + An AppearanceSetEventArgs object indicating if the operatin was successfull + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the RebakeAvatarRequested event + An RebakeAvatarTexturesEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + A cache of wearables currently being worn + + + A cache of textures currently being worn + + + Incrementing serial number for AgentCachedTexture packets + + + Incrementing serial number for AgentSetAppearance packets + + + Indicates whether or not the appearance thread is currently + running, to prevent multiple appearance threads from running + simultaneously + + + Reference to our agent + + + + Timer used for delaying rebake on changing outfit + + + + + Main appearance thread + + + + + Default constructor + + A reference to our agent + + + + Obsolete method for setting appearance. This function no longer does anything. + Use RequestSetAppearance() to manually start the appearance thread + + + + + Obsolete method for setting appearance. This function no longer does anything. + Use RequestSetAppearance() to manually start the appearance thread + + Unused parameter + + + + Starts the appearance setting thread + + + + + Starts the appearance setting thread + + True to force rebaking, otherwise false + + + + Ask the server what textures our agent is currently wearing + + + + + Build hashes out of the texture assetIDs for each baking layer to + ask the simulator whether it has cached copies of each baked texture + + + + + Returns the AssetID of the asset that is currently being worn in a + given WearableType slot + + WearableType slot to get the AssetID for + The UUID of the asset being worn in the given slot, or + UUID.Zero if no wearable is attached to the given slot or wearables + have not been downloaded yet + + + + Add a wearable to the current outfit and set appearance + + Wearable to be added to the outfit + + + + Add a list of wearables to the current outfit and set appearance + + List of wearable inventory items to + be added to the outfit + + + + Remove a wearable from the current outfit and set appearance + + Wearable to be removed from the outfit + + + + Removes a list of wearables from the current outfit and set appearance + + List of wearable inventory items to + be removed from the outfit + + + + Replace the current outfit with a list of wearables and set appearance + + List of wearable inventory items that + define a new outfit + + + + Checks if an inventory item is currently being worn + + The inventory item to check against the agent + wearables + The WearableType slot that the item is being worn in, + or WearbleType.Invalid if it is not currently being worn + + + + Returns a copy of the agents currently worn wearables + + A copy of the agents currently worn wearables + Avoid calling this function multiple times as it will make + a copy of all of the wearable data each time + + + + Calls either or + depending on the value of + replaceItems + + List of wearable inventory items to add + to the outfit or become a new outfit + True to replace existing items with the + new list of items, false to add these items to the existing outfit + + + + Adds a list of attachments to our agent + + A List containing the attachments to add + If true, tells simulator to remove existing attachment + first + + + + Attach an item to our agent at a specific attach point + + A to attach + the on the avatar + to attach the item to + + + + Attach an item to our agent specifying attachment details + + The of the item to attach + The attachments owner + The name of the attachment + The description of the attahment + The to apply when attached + The of the attachment + The on the agent + to attach the item to + + + + Detach an item from our agent using an object + + An object + + + + Detach an item from our agent + + The inventory itemID of the item to detach + + + + Inform the sim which wearables are part of our current outfit + + + + + Replaces the Wearables collection with a list of new wearable items + + Wearable items to replace the Wearables collection with + + + + Calculates base color/tint for a specific wearable + based on its params + + All the color info gathered from wearable's VisualParams + passed as list of ColorParamInfo tuples + Base color/tint for the wearable + + + + Blocking method to populate the Wearables dictionary + + True on success, otherwise false + + + + Blocking method to populate the Textures array with cached bakes + + True on success, otherwise false + + + + Populates textures and visual params from a decoded asset + + Wearable to decode + + + + Blocking method to download and parse currently worn wearable assets + + True on success, otherwise false + + + + Get a list of all of the textures that need to be downloaded for a + single bake layer + + Bake layer to get texture AssetIDs for + A list of texture AssetIDs to download + + + + Helper method to lookup the TextureID for a single layer and add it + to a list if it is not already present + + + + + + + Blocking method to download all of the textures needed for baking + the given bake layers + + A list of layers that need baking + No return value is given because the baking will happen + whether or not all textures are successfully downloaded + + + + Blocking method to create and upload baked textures for all of the + missing bakes + + True on success, otherwise false + + + + Blocking method to create and upload a baked texture for a single + bake layer + + Layer to bake + True on success, otherwise false + + + + Blocking method to upload a baked texture + + Five channel JPEG2000 texture data to upload + UUID of the newly created asset on success, otherwise UUID.Zero + + + + Creates a dictionary of visual param values from the downloaded wearables + + A dictionary of visual param indices mapping to visual param + values for our agent that can be fed to the Baker class + + + + Create an AgentSetAppearance packet from Wearables data and the + Textures array and send it + + + + + Converts a WearableType to a bodypart or clothing WearableType + + A WearableType + AssetType.Bodypart or AssetType.Clothing or AssetType.Unknown + + + + Converts a BakeType to the corresponding baked texture slot in AvatarTextureIndex + + A BakeType + The AvatarTextureIndex slot that holds the given BakeType + + + + Gives the layer number that is used for morph mask + + >A BakeType + Which layer number as defined in BakeTypeToTextures is used for morph mask + + + + Converts a BakeType to a list of the texture slots that make up that bake + + A BakeType + A list of texture slots that are inputs for the given bake + + + Triggered when an AgentWearablesUpdate packet is received, + telling us what our avatar is currently wearing + request. + + + Raised when an AgentCachedTextureResponse packet is + received, giving a list of cached bakes that were found on the + simulator + request. + + + + Raised when appearance data is sent to the simulator, also indicates + the main appearance thread is finished. + + request. + + + + Triggered when the simulator requests the agent rebake its appearance. + + + + + + Returns true if AppearanceManager is busy and trying to set or change appearance will fail + + + + + Contains information about a wearable inventory item + + + + Inventory ItemID of the wearable + + + AssetID of the wearable asset + + + WearableType of the wearable + + + AssetType of the wearable + + + Asset data for the wearable + + + + Data collected from visual params for each wearable + needed for the calculation of the color + + + + + Holds a texture assetID and the data needed to bake this layer into + an outfit texture. Used to keep track of currently worn textures + and baking data + + + + A texture AssetID + + + Asset data for the texture + + + Collection of alpha masks that needs applying + + + Tint that should be applied to the texture + + + Contains the Event data returned from the data server from an AgentWearablesRequest + + + Construct a new instance of the AgentWearablesReplyEventArgs class + + + Contains the Event data returned from the data server from an AgentCachedTextureResponse + + + Construct a new instance of the AgentCachedBakesReplyEventArgs class + + + Contains the Event data returned from an AppearanceSetRequest + + + + Triggered when appearance data is sent to the sim and + the main appearance thread is done. + Indicates whether appearance setting was successful + + + Indicates whether appearance setting was successful + + + Contains the Event data returned from the data server from an RebakeAvatarTextures + + + + Triggered when the simulator sends a request for this agent to rebake + its appearance + + The ID of the Texture Layer to bake + + + The ID of the Texture Layer to bake + + + + Registers, unregisters, and fires events generated by incoming packets + + + + Reference to the GridClient object + + + + Default constructor + + + + + + Register an event handler + + Use PacketType.Default to fire this event on every + incoming packet + Packet type to register the handler for + Callback to be fired + + + + Unregister an event handler + + Packet type to unregister the handler for + Callback to be unregistered + + + + Fire the events registered for this packet type synchronously + + Incoming packet type + Incoming packet + Simulator this packet was received from + + + + Fire the events registered for this packet type asynchronously + + Incoming packet type + Incoming packet + Simulator this packet was received from + + + + Object that is passed to worker threads in the ThreadPool for + firing packet callbacks + + + + Callback to fire for this packet + + + Reference to the simulator that this packet came from + + + The packet that needs to be processed + + + + Registers, unregisters, and fires events generated by the Capabilities + event queue + + + + Reference to the GridClient object + + + + Default constructor + + Reference to the GridClient object + + + + Register an new event handler for a capabilities event sent via the EventQueue + + Use String.Empty to fire this event on every CAPS event + Capability event name to register the + handler for + Callback to fire + + + + Unregister a previously registered capabilities handler + + Capability event name unregister the + handler for + Callback to unregister + + + + Fire the events registered for this event type synchronously + + Capability name + Decoded event body + Reference to the simulator that + generated this event + + + + Fire the events registered for this event type asynchronously + + Capability name + Decoded event body + Reference to the simulator that + generated this event + + + + Object that is passed to worker threads in the ThreadPool for + firing CAPS callbacks + + + + Callback to fire for this packet + + + Name of the CAPS event + + + Strongly typed decoded data + + + Reference to the simulator that generated this event + + + + Access to the data server which allows searching for land, events, people, etc + + + + The event subscribers. null if no subcribers + + + Raises the EventInfoReply event + An EventInfoReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the DirEventsReply event + An DirEventsReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the PlacesReply event + A PlacesReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the DirPlacesReply event + A DirPlacesReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the DirClassifiedsReply event + A DirClassifiedsReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the DirGroupsReply event + A DirGroupsReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the DirPeopleReply event + A DirPeopleReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + The event subscribers. null if no subcribers + + + Raises the DirLandReply event + A DirLandReplyEventArgs object containing the + data returned from the data server + + + Thread sync lock object + + + + Constructs a new instance of the DirectoryManager class + + An instance of GridClient + + + + Query the data server for a list of classified ads containing the specified string. + Defaults to searching for classified placed in any category, and includes PG, Adult and Mature + results. + + Responses are sent 16 per response packet, there is no way to know how many results a query reply will contain however assuming + the reply packets arrived ordered, a response with less than 16 entries would indicate all results have been received + + The event is raised when a response is received from the simulator + + A string containing a list of keywords to search for + A UUID to correlate the results when the event is raised + + + + Query the data server for a list of classified ads which contain specified keywords (Overload) + + The event is raised when a response is received from the simulator + + A string containing a list of keywords to search for + The category to search + A set of flags which can be ORed to modify query options + such as classified maturity rating. + A UUID to correlate the results when the event is raised + + Search classified ads containing the key words "foo" and "bar" in the "Any" category that are either PG or Mature + + UUID searchID = StartClassifiedSearch("foo bar", ClassifiedCategories.Any, ClassifiedQueryFlags.PG | ClassifiedQueryFlags.Mature); + + + + Responses are sent 16 at a time, there is no way to know how many results a query reply will contain however assuming + the reply packets arrived ordered, a response with less than 16 entries would indicate all results have been received + + + + + Starts search for places (Overloaded) + + The event is raised when a response is received from the simulator + + Search text + Each request is limited to 100 places + being returned. To get the first 100 result entries of a request use 0, + from 100-199 use 1, 200-299 use 2, etc. + A UUID to correlate the results when the event is raised + + + + Queries the dataserver for parcels of land which are flagged to be shown in search + + The event is raised when a response is received from the simulator + + A string containing a list of keywords to search for separated by a space character + A set of flags which can be ORed to modify query options + such as classified maturity rating. + The category to search + Each request is limited to 100 places + being returned. To get the first 100 result entries of a request use 0, + from 100-199 use 1, 200-299 use 2, etc. + A UUID to correlate the results when the event is raised + + Search places containing the key words "foo" and "bar" in the "Any" category that are either PG or Adult + + UUID searchID = StartDirPlacesSearch("foo bar", DirFindFlags.DwellSort | DirFindFlags.IncludePG | DirFindFlags.IncludeAdult, ParcelCategory.Any, 0); + + + + Additional information on the results can be obtained by using the ParcelManager.InfoRequest method + + + + + Starts a search for land sales using the directory + + The event is raised when a response is received from the simulator + + What type of land to search for. Auction, + estate, mainland, "first land", etc + The OnDirLandReply event handler must be registered before + calling this function. There is no way to determine how many + results will be returned, or how many times the callback will be + fired other than you won't get more than 100 total parcels from + each query. + + + + Starts a search for land sales using the directory + + The event is raised when a response is received from the simulator + + What type of land to search for. Auction, + estate, mainland, "first land", etc + Maximum price to search for + Maximum area to search for + Each request is limited to 100 parcels + being returned. To get the first 100 parcels of a request use 0, + from 100-199 use 1, 200-299 use 2, etc. + The OnDirLandReply event handler must be registered before + calling this function. There is no way to determine how many + results will be returned, or how many times the callback will be + fired other than you won't get more than 100 total parcels from + each query. + + + + Send a request to the data server for land sales listings + + + Flags sent to specify query options + + Available flags: + Specify the parcel rating with one or more of the following: + IncludePG IncludeMature IncludeAdult + + Specify the field to pre sort the results with ONLY ONE of the following: + PerMeterSort NameSort AreaSort PricesSort + + Specify the order the results are returned in, if not specified the results are pre sorted in a Descending Order + SortAsc + + Specify additional filters to limit the results with one or both of the following: + LimitByPrice LimitByArea + + Flags can be combined by separating them with the | (pipe) character + + Additional details can be found in + + What type of land to search for. Auction, + Estate or Mainland + Maximum price to search for when the + DirFindFlags.LimitByPrice flag is specified in findFlags + Maximum area to search for when the + DirFindFlags.LimitByArea flag is specified in findFlags + Each request is limited to 100 parcels + being returned. To get the first 100 parcels of a request use 0, + from 100-199 use 100, 200-299 use 200, etc. + The event will be raised with the response from the simulator + + There is no way to determine how many results will be returned, or how many times the callback will be + fired other than you won't get more than 100 total parcels from + each reply. + + Any land set for sale to either anybody or specific to the connected agent will be included in the + results if the land is included in the query + + + // request all mainland, any maturity rating that is larger than 512 sq.m + StartLandSearch(DirFindFlags.SortAsc | DirFindFlags.PerMeterSort | DirFindFlags.LimitByArea | DirFindFlags.IncludePG | DirFindFlags.IncludeMature | DirFindFlags.IncludeAdult, SearchTypeFlags.Mainland, 0, 512, 0); + + + + + Search for Groups + + The name or portion of the name of the group you wish to search for + Start from the match number + + + + + Search for Groups + + The name or portion of the name of the group you wish to search for + Start from the match number + Search flags + + + + + Search the People directory for other avatars + + The name or portion of the name of the avatar you wish to search for + + + + + + Search Places for parcels of land you personally own + + + + + Searches Places for land owned by the specified group + + ID of the group you want to recieve land list for (You must be a member of the group) + Transaction (Query) ID which can be associated with results from your request. + + + + Search the Places directory for parcels that are listed in search and contain the specified keywords + + A string containing the keywords to search for + Transaction (Query) ID which can be associated with results from your request. + + + + Search Places - All Options + + One of the Values from the DirFindFlags struct, ie: AgentOwned, GroupOwned, etc. + One of the values from the SearchCategory Struct, ie: Any, Linden, Newcomer + A string containing a list of keywords to search for separated by a space character + String Simulator Name to search in + LLUID of group you want to recieve results for + Transaction (Query) ID which can be associated with results from your request. + Transaction (Query) ID which can be associated with results from your request. + + + + Search All Events with specifid searchText in all categories, includes PG, Mature and Adult + + A string containing a list of keywords to search for separated by a space character + Each request is limited to 100 entries + being returned. To get the first group of entries of a request use 0, + from 100-199 use 100, 200-299 use 200, etc. + UUID of query to correlate results in callback. + + + + Search Events + + A string containing a list of keywords to search for separated by a space character + One or more of the following flags: DateEvents, IncludePG, IncludeMature, IncludeAdult + from the Enum + + Multiple flags can be combined by separating the flags with the | (pipe) character + "u" for in-progress and upcoming events, -or- number of days since/until event is scheduled + For example "0" = Today, "1" = tomorrow, "2" = following day, "-1" = yesterday, etc. + Each request is limited to 100 entries + being returned. To get the first group of entries of a request use 0, + from 100-199 use 100, 200-299 use 200, etc. + EventCategory event is listed under. + UUID of query to correlate results in callback. + + + Requests Event Details + ID of Event returned from the method + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming event message + The Unique Capabilities Key + The event message containing the data + The simulator the message originated from + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming event message + The Unique Capabilities Key + The event message containing the data + The simulator the message originated from + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Process an incoming packet and raise the appropriate events + The sender + The EventArgs object containing the packet data + + + Raised when the data server responds to a request. + + + Raised when the data server responds to a request. + + + Raised when the data server responds to a request. + + + Raised when the data server responds to a request. + + + Raised when the data server responds to a request. + + + Raised when the data server responds to a request. + + + Raised when the data server responds to a request. + + + Raised when the data server responds to a request. + + + Classified Ad categories + + + Classified is listed in the Any category + + + Classified is shopping related + + + Classified is + + + + + + + + + + + + + + + + + + + + + + + + Event Categories + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Query Flags used in many of the DirectoryManager methods to specify which query to execute and how to return the results. + + Flags can be combined using the | (pipe) character, not all flags are available in all queries + + + + Query the People database + + + + + + + + + Query the Groups database + + + Query the Events database + + + Query the land holdings database for land owned by the currently connected agent + + + + + + Query the land holdings database for land which is owned by a Group + + + Specifies the query should pre sort the results based upon traffic + when searching the Places database + + + + + + + + + + + + + + + Specifies the query should pre sort the results in an ascending order when searching the land sales database. + This flag is only used when searching the land sales database + + + Specifies the query should pre sort the results using the SalePrice field when searching the land sales database. + This flag is only used when searching the land sales database + + + Specifies the query should pre sort the results by calculating the average price/sq.m (SalePrice / Area) when searching the land sales database. + This flag is only used when searching the land sales database + + + Specifies the query should pre sort the results using the ParcelSize field when searching the land sales database. + This flag is only used when searching the land sales database + + + Specifies the query should pre sort the results using the Name field when searching the land sales database. + This flag is only used when searching the land sales database + + + When set, only parcels less than the specified Price will be included when searching the land sales database. + This flag is only used when searching the land sales database + + + When set, only parcels greater than the specified Size will be included when searching the land sales database. + This flag is only used when searching the land sales database + + + + + + + + + Include PG land in results. This flag is used when searching both the Groups, Events and Land sales databases + + + Include Mature land in results. This flag is used when searching both the Groups, Events and Land sales databases + + + Include Adult land in results. This flag is used when searching both the Groups, Events and Land sales databases + + + + + + + Land types to search dataserver for + + + + Search Auction, Mainland and Estate + + + Land which is currently up for auction + + + Parcels which are on the mainland (Linden owned) continents + + + Parcels which are on privately owned simulators + + + + The content rating of the event + + + + Event is PG + + + Event is Mature + + + Event is Adult + + + + Classified Ad Options + + There appear to be two formats the flags are packed in. + This set of flags is for the newer style + + + + + + + + + + + + + + + + + + + Classified ad query options + + + + Include all ads in results + + + Include PG ads in results + + + Include Mature ads in results + + + Include Adult ads in results + + + + The For Sale flag in PlacesReplyData + + + + Parcel is not listed for sale + + + Parcel is For Sale + + + + A classified ad on the grid + + + + UUID for this ad, useful for looking up detailed + information about it + + + The title of this classified ad + + + Flags that show certain options applied to the classified + + + Creation date of the ad + + + Expiration date of the ad + + + Price that was paid for this ad + + + Print the struct data as a string + A string containing the field name, and field value + + + + A parcel retrieved from the dataserver such as results from the + "For-Sale" listings or "Places" Search + + + + The unique dataserver parcel ID + This id is used to obtain additional information from the entry + by using the method + + + A string containing the name of the parcel + + + The size of the parcel + This field is not returned for Places searches + + + The price of the parcel + This field is not returned for Places searches + + + If True, this parcel is flagged to be auctioned + + + If true, this parcel is currently set for sale + + + Parcel traffic + + + Print the struct data as a string + A string containing the field name, and field value + + + + An Avatar returned from the dataserver + + + + Online status of agent + This field appears to be obsolete and always returns false + + + The agents first name + + + The agents last name + + + The agents + + + Print the struct data as a string + A string containing the field name, and field value + + + + Response to a "Groups" Search + + + + The Group ID + + + The name of the group + + + The current number of members + + + Print the struct data as a string + A string containing the field name, and field value + + + + Parcel information returned from a request + + Represents one of the following: + A parcel of land on the grid that has its Show In Search flag set + A parcel of land owned by the agent making the request + A parcel of land owned by a group the agent making the request is a member of + + + In a request for Group Land, the First record will contain an empty record + + Note: This is not the same as searching the land for sale data source + + + + The ID of the Agent of Group that owns the parcel + + + The name + + + The description + + + The Size of the parcel + + + The billable Size of the parcel, for mainland + parcels this will match the ActualArea field. For Group owned land this will be 10 percent smaller + than the ActualArea. For Estate land this will always be 0 + + + Indicates the ForSale status of the parcel + + + The Gridwide X position + + + The Gridwide Y position + + + The Z position of the parcel, or 0 if no landing point set + + + The name of the Region the parcel is located in + + + The Asset ID of the parcels Snapshot texture + + + The calculated visitor traffic + + + The billing product SKU + Known values are: + + 023Mainland / Full Region + 024Estate / Full Region + 027Estate / Openspace + 029Estate / Homestead + 129Mainland / Homestead (Linden Owned) + + + + + No longer used, will always be 0 + + + Get a SL URL for the parcel + A string, containing a standard SLURL + + + Print the struct data as a string + A string containing the field name, and field value + + + + An "Event" Listing summary + + + + The ID of the event creator + + + The name of the event + + + The events ID + + + A string containing the short date/time the event will begin + + + The event start time in Unixtime (seconds since epoch) + + + The events maturity rating + + + Print the struct data as a string + A string containing the field name, and field value + + + + The details of an "Event" + + + + The events ID + + + The ID of the event creator + + + The name of the event + + + The category + + + The events description + + + The short date/time the event will begin + + + The event start time in Unixtime (seconds since epoch) UTC adjusted + + + The length of the event in minutes + + + 0 if no cover charge applies + + + The cover charge amount in L$ if applicable + + + The name of the region where the event is being held + + + The gridwide location of the event + + + The maturity rating + + + Get a SL URL for the parcel where the event is hosted + A string, containing a standard SLURL + + + Print the struct data as a string + A string containing the field name, and field value + + + Contains the Event data returned from the data server from an EventInfoRequest + + + Construct a new instance of the EventInfoReplyEventArgs class + A single EventInfo object containing the details of an event + + + + A single EventInfo object containing the details of an event + + + + Contains the "Event" detail data returned from the data server + + + Construct a new instance of the DirEventsReplyEventArgs class + The ID of the query returned by the data server. + This will correlate to the ID returned by the method + A list containing the "Events" returned by the search query + + + The ID returned by + + + A list of "Events" returned by the data server + + + Contains the "Event" list data returned from the data server + + + Construct a new instance of PlacesReplyEventArgs class + The ID of the query returned by the data server. + This will correlate to the ID returned by the method + A list containing the "Places" returned by the data server query + + + The ID returned by + + + A list of "Places" returned by the data server + + + Contains the places data returned from the data server + + + Construct a new instance of the DirPlacesReplyEventArgs class + The ID of the query returned by the data server. + This will correlate to the ID returned by the method + A list containing land data returned by the data server + + + The ID returned by + + + A list containing Places data returned by the data server + + + Contains the classified data returned from the data server + + + Construct a new instance of the DirClassifiedsReplyEventArgs class + A list of classified ad data returned from the data server + + + A list containing Classified Ads returned by the data server + + + Contains the group data returned from the data server + + + Construct a new instance of the DirGroupsReplyEventArgs class + The ID of the query returned by the data server. + This will correlate to the ID returned by the method + A list of groups data returned by the data server + + + The ID returned by + + + A list containing Groups data returned by the data server + + + Contains the people data returned from the data server + + + Construct a new instance of the DirPeopleReplyEventArgs class + The ID of the query returned by the data server. + This will correlate to the ID returned by the method + A list of people data returned by the data server + + + The ID returned by + + + A list containing People data returned by the data server + + + Contains the land sales data returned from the data server + + + Construct a new instance of the DirLandReplyEventArgs class + A list of parcels for sale returned by the data server + + + A list containing land forsale data returned by the data server + + + diff --git a/bin/OpenMetaverse.dll b/bin/OpenMetaverse.dll index 8751bfc71e..59e39bbf60 100644 Binary files a/bin/OpenMetaverse.dll and b/bin/OpenMetaverse.dll differ diff --git a/bin/OpenMetaverse.dll.config b/bin/OpenMetaverse.dll.config index 13fdc11c72..dc36a4513f 100644 --- a/bin/OpenMetaverse.dll.config +++ b/bin/OpenMetaverse.dll.config @@ -1,7 +1,7 @@ - - - - - - - + + + + + + + diff --git a/bin/OpenMetaverseTypes.XML b/bin/OpenMetaverseTypes.XML index 2dc28aea7c..df1853a41a 100644 --- a/bin/OpenMetaverseTypes.XML +++ b/bin/OpenMetaverseTypes.XML @@ -1,1852 +1,1957 @@ - - - - OpenMetaverseTypes - - - - - A hierarchical token bucket for bandwidth throttling. See - http://en.wikipedia.org/wiki/Token_bucket for more information - - - - Parent bucket to this bucket, or null if this is a root - bucket - - - Size of the bucket in bytes. If zero, the bucket has - infinite capacity - - - Rate that the bucket fills, in bytes per millisecond. If - zero, the bucket always remains full - - - Number of tokens currently in the bucket - - - Time of the last drip, in system ticks - - - - Default constructor - - Parent bucket if this is a child bucket, or - null if this is a root bucket - Maximum size of the bucket in bytes, or - zero if this bucket has no maximum capacity - Rate that the bucket fills, in bytes per - second. If zero, the bucket always remains full - - - - Remove a given number of tokens from the bucket - - Number of tokens to remove from the bucket - True if the requested number of tokens were removed from - the bucket, otherwise false - - - - Remove a given number of tokens from the bucket - - Number of tokens to remove from the bucket - True if tokens were added to the bucket - during this call, otherwise false - True if the requested number of tokens were removed from - the bucket, otherwise false - - - - Add tokens to the bucket over time. The number of tokens added each - call depends on the length of time that has passed since the last - call to Drip - - True if tokens were added to the bucket, otherwise false - - - - The parent bucket of this bucket, or null if this bucket has no - parent. The parent bucket will limit the aggregate bandwidth of all - of its children buckets - - - - - Maximum burst rate in bytes per second. This is the maximum number - of tokens that can accumulate in the bucket at any one time - - - - - The speed limit of this bucket in bytes per second. This is the - number of tokens that are added to the bucket per second - - Tokens are added to the bucket any time - is called, at the granularity of - the system tick interval (typically around 15-22ms) - - - - The number of bytes that can be sent at this moment. This is the - current number of tokens in the bucket - If this bucket has a parent bucket that does not have - enough tokens for a request, will - return false regardless of the content of this bucket - - - - - Same as Queue except Dequeue function blocks until there is an object to return. - Note: This class does not need to be synchronized - - - - - Create new BlockingQueue. - - The System.Collections.ICollection to copy elements from - - - - Create new BlockingQueue. - - The initial number of elements that the queue can contain - - - - Create new BlockingQueue. - - - - - BlockingQueue Destructor (Close queue, resume any waiting thread). - - - - - Remove all objects from the Queue. - - - - - Remove all objects from the Queue, resume all dequeue threads. - - - - - Removes and returns the object at the beginning of the Queue. - - Object in queue. - - - - Removes and returns the object at the beginning of the Queue. - - time to wait before returning - Object in queue. - - - - Removes and returns the object at the beginning of the Queue. - - time to wait before returning (in milliseconds) - Object in queue. - - - - Adds an object to the end of the Queue - - Object to put in queue - - - - Open Queue. - - - - - Gets flag indicating if queue has been closed. - - - - - Convert this matrix to euler rotations - - X euler angle - Y euler angle - Z euler angle - - - - Convert this matrix to a quaternion rotation - - A quaternion representation of this rotation matrix - - - - Construct a matrix from euler rotation values in radians - - X euler angle in radians - Y euler angle in radians - Z euler angle in radians - - - - Get a formatted string representation of the vector - - A string representation of the vector - - - A 4x4 matrix containing all zeroes - - - A 4x4 identity matrix - - - - An 8-bit color structure including an alpha channel - - - - Red - - - Green - - - Blue - - - Alpha - - - - - - - - - - - - - Builds a color from a byte array - - Byte array containing a 16 byte color - Beginning position in the byte array - True if the byte array stores inverted values, - otherwise false. For example the color black (fully opaque) inverted - would be 0xFF 0xFF 0xFF 0x00 - - - - Returns the raw bytes for this vector - - Byte array containing a 16 byte color - Beginning position in the byte array - True if the byte array stores inverted values, - otherwise false. For example the color black (fully opaque) inverted - would be 0xFF 0xFF 0xFF 0x00 - True if the alpha value is inverted in - addition to whatever the inverted parameter is. Setting inverted true - and alphaInverted true will flip the alpha value back to non-inverted, - but keep the other color bytes inverted - A 16 byte array containing R, G, B, and A - - - - Copy constructor - - Color to copy - - - - IComparable.CompareTo implementation - - Sorting ends up like this: |--Grayscale--||--Color--|. - Alpha is only used when the colors are otherwise equivalent - - - - Builds a color from a byte array - - Byte array containing a 16 byte color - Beginning position in the byte array - True if the byte array stores inverted values, - otherwise false. For example the color black (fully opaque) inverted - would be 0xFF 0xFF 0xFF 0x00 - True if the alpha value is inverted in - addition to whatever the inverted parameter is. Setting inverted true - and alphaInverted true will flip the alpha value back to non-inverted, - but keep the other color bytes inverted - - - - Writes the raw bytes for this color to a byte array - - Destination byte array - Position in the destination array to start - writing. Must be at least 16 bytes before the end of the array - - - - Serializes this color into four bytes in a byte array - - Destination byte array - Position in the destination array to start - writing. Must be at least 4 bytes before the end of the array - True to invert the output (1.0 becomes 0 - instead of 255) - - - - Writes the raw bytes for this color to a byte array - - Destination byte array - Position in the destination array to start - writing. Must be at least 16 bytes before the end of the array - - - - Create an RGB color from a hue, saturation, value combination - - Hue - Saturation - Value - An fully opaque RGB color (alpha is 1.0) - - - A Color4 with zero RGB values and fully opaque (alpha 1.0) - - - A Color4 with full RGB values (1.0) and fully opaque (alpha 1.0) - - - X value - - - Y value - - - Z value - - - W value - - - - Constructor, builds a vector from a byte array - - Byte array containing four four-byte floats - Beginning position in the byte array - - - - Test if this vector is equal to another vector, within a given - tolerance range - - Vector to test against - The acceptable magnitude of difference - between the two vectors - True if the magnitude of difference between the two vectors - is less than the given tolerance, otherwise false - - - - IComparable.CompareTo implementation - - - - - Test if this vector is composed of all finite numbers - - - - - Builds a vector from a byte array - - Byte array containing a 16 byte vector - Beginning position in the byte array - - - - Returns the raw bytes for this vector - - A 16 byte array containing X, Y, Z, and W - - - - Writes the raw bytes for this vector to a byte array - - Destination byte array - Position in the destination array to start - writing. Must be at least 16 bytes before the end of the array - - - - Get a string representation of the vector elements with up to three - decimal digits and separated by spaces only - - Raw string representation of the vector - - - A vector with a value of 0,0,0,0 - - - A vector with a value of 1,1,1,1 - - - A vector with a value of 1,0,0,0 - - - A vector with a value of 0,1,0,0 - - - A vector with a value of 0,0,1,0 - - - A vector with a value of 0,0,0,1 - - - - A three-dimensional vector with doubleing-point values - - - - X value - - - Y value - - - Z value - - - - Constructor, builds a vector from a byte array - - Byte array containing three eight-byte doubles - Beginning position in the byte array - - - - Test if this vector is equal to another vector, within a given - tolerance range - - Vector to test against - The acceptable magnitude of difference - between the two vectors - True if the magnitude of difference between the two vectors - is less than the given tolerance, otherwise false - - - - IComparable.CompareTo implementation - - - - - Test if this vector is composed of all finite numbers - - - - - Builds a vector from a byte array - - Byte array containing a 24 byte vector - Beginning position in the byte array - - - - Returns the raw bytes for this vector - - A 24 byte array containing X, Y, and Z - - - - Writes the raw bytes for this vector to a byte array - - Destination byte array - Position in the destination array to start - writing. Must be at least 24 bytes before the end of the array - - - - Parse a vector from a string - - A string representation of a 3D vector, enclosed - in arrow brackets and separated by commas - - - - Interpolates between two vectors using a cubic equation - - - - - Get a formatted string representation of the vector - - A string representation of the vector - - - - Get a string representation of the vector elements with up to three - decimal digits and separated by spaces only - - Raw string representation of the vector - - - - Cross product between two vectors - - - - A vector with a value of 0,0,0 - - - A vector with a value of 1,1,1 - - - A unit vector facing forward (X axis), value of 1,0,0 - - - A unit vector facing left (Y axis), value of 0,1,0 - - - A unit vector facing up (Z axis), value of 0,0,1 - - - For thread safety - - - For thread safety - - - - Purges expired objects from the cache. Called automatically by the purge timer. - - - - - A three-dimensional vector with floating-point values - - - - X value - - - Y value - - - Z value - - - - Constructor, builds a vector from a byte array - - Byte array containing three four-byte floats - Beginning position in the byte array - - - - Test if this vector is equal to another vector, within a given - tolerance range - - Vector to test against - The acceptable magnitude of difference - between the two vectors - True if the magnitude of difference between the two vectors - is less than the given tolerance, otherwise false - - - - IComparable.CompareTo implementation - - - - - Test if this vector is composed of all finite numbers - - - - - Builds a vector from a byte array - - Byte array containing a 12 byte vector - Beginning position in the byte array - - - - Returns the raw bytes for this vector - - A 12 byte array containing X, Y, and Z - - - - Writes the raw bytes for this vector to a byte array - - Destination byte array - Position in the destination array to start - writing. Must be at least 12 bytes before the end of the array - - - - Parse a vector from a string - - A string representation of a 3D vector, enclosed - in arrow brackets and separated by commas - - - - Calculate the rotation between two vectors - - Normalized directional vector (such as 1,0,0 for forward facing) - Normalized target vector - - - - Interpolates between two vectors using a cubic equation - - - - - Get a formatted string representation of the vector - - A string representation of the vector - - - - Get a string representation of the vector elements with up to three - decimal digits and separated by spaces only - - Raw string representation of the vector - - - - Cross product between two vectors - - - - A vector with a value of 0,0,0 - - - A vector with a value of 1,1,1 - - - A unit vector facing forward (X axis), value 1,0,0 - - - A unit vector facing left (Y axis), value 0,1,0 - - - A unit vector facing up (Z axis), value 0,0,1 - - - - A two-dimensional vector with floating-point values - - - - X value - - - Y value - - - - Test if this vector is equal to another vector, within a given - tolerance range - - Vector to test against - The acceptable magnitude of difference - between the two vectors - True if the magnitude of difference between the two vectors - is less than the given tolerance, otherwise false - - - - Test if this vector is composed of all finite numbers - - - - - IComparable.CompareTo implementation - - - - - Builds a vector from a byte array - - Byte array containing two four-byte floats - Beginning position in the byte array - - - - Returns the raw bytes for this vector - - An eight-byte array containing X and Y - - - - Writes the raw bytes for this vector to a byte array - - Destination byte array - Position in the destination array to start - writing. Must be at least 8 bytes before the end of the array - - - - Parse a vector from a string - - A string representation of a 2D vector, enclosed - in arrow brackets and separated by commas - - - - Interpolates between two vectors using a cubic equation - - - - - Get a formatted string representation of the vector - - A string representation of the vector - - - - Get a string representation of the vector elements with up to three - decimal digits and separated by spaces only - - Raw string representation of the vector - - - A vector with a value of 0,0 - - - A vector with a value of 1,1 - - - A vector with a value of 1,0 - - - A vector with a value of 0,1 - - - Used for converting degrees to radians - - - Used for converting radians to degrees - - - - Convert the first two bytes starting in the byte array in - little endian ordering to a signed short integer - - An array two bytes or longer - A signed short integer, will be zero if a short can't be - read at the given position - - - - Convert the first two bytes starting at the given position in - little endian ordering to a signed short integer - - An array two bytes or longer - Position in the array to start reading - A signed short integer, will be zero if a short can't be - read at the given position - - - - Convert the first four bytes starting at the given position in - little endian ordering to a signed integer - - An array four bytes or longer - Position to start reading the int from - A signed integer, will be zero if an int can't be read - at the given position - - - - Convert the first four bytes of the given array in little endian - ordering to a signed integer - - An array four bytes or longer - A signed integer, will be zero if the array contains - less than four bytes - - - - Convert the first eight bytes of the given array in little endian - ordering to a signed long integer - - An array eight bytes or longer - A signed long integer, will be zero if the array contains - less than eight bytes - - - - Convert the first eight bytes starting at the given position in - little endian ordering to a signed long integer - - An array eight bytes or longer - Position to start reading the long from - A signed long integer, will be zero if a long can't be read - at the given position - - - - Convert the first two bytes starting at the given position in - little endian ordering to an unsigned short - - Byte array containing the ushort - Position to start reading the ushort from - An unsigned short, will be zero if a ushort can't be read - at the given position - - - - Convert two bytes in little endian ordering to an unsigned short - - Byte array containing the ushort - An unsigned short, will be zero if a ushort can't be - read - - - - Convert the first four bytes starting at the given position in - little endian ordering to an unsigned integer - - Byte array containing the uint - Position to start reading the uint from - An unsigned integer, will be zero if a uint can't be read - at the given position - - - - Convert the first four bytes of the given array in little endian - ordering to an unsigned integer - - An array four bytes or longer - An unsigned integer, will be zero if the array contains - less than four bytes - - - - Convert the first eight bytes of the given array in little endian - ordering to an unsigned 64-bit integer - - An array eight bytes or longer - An unsigned 64-bit integer, will be zero if the array - contains less than eight bytes - - - - Convert four bytes in little endian ordering to a floating point - value - - Byte array containing a little ending floating - point value - Starting position of the floating point value in - the byte array - Single precision value - - - - Convert an integer to a byte array in little endian format - - The integer to convert - A four byte little endian array - - - - Convert an integer to a byte array in big endian format - - The integer to convert - A four byte big endian array - - - - Convert a 64-bit integer to a byte array in little endian format - - The value to convert - An 8 byte little endian array - - - - Convert a 64-bit unsigned integer to a byte array in little endian - format - - The value to convert - An 8 byte little endian array - - - - Convert a floating point value to four bytes in little endian - ordering - - A floating point value - A four byte array containing the value in little endian - ordering - - - - Converts an unsigned integer to a hexadecimal string - - An unsigned integer to convert to a string - A hexadecimal string 10 characters long - 0x7fffffff - - - - Convert a variable length UTF8 byte array to a string - - The UTF8 encoded byte array to convert - The decoded string - - - - Converts a byte array to a string containing hexadecimal characters - - The byte array to convert to a string - The name of the field to prepend to each - line of the string - A string containing hexadecimal characters on multiple - lines. Each line is prepended with the field name - - - - Converts a byte array to a string containing hexadecimal characters - - The byte array to convert to a string - Number of bytes in the array to parse - A string to prepend to each line of the hex - dump - A string containing hexadecimal characters on multiple - lines. Each line is prepended with the field name - - - - Convert a string to a UTF8 encoded byte array - - The string to convert - A null-terminated UTF8 byte array - - - - Converts a string containing hexadecimal characters to a byte array - - String containing hexadecimal characters - If true, gracefully handles null, empty and - uneven strings as well as stripping unconvertable characters - The converted byte array - - - - Returns true is c is a hexadecimal digit (A-F, a-f, 0-9) - - Character to test - true if hex digit, false if not - - - - Converts 1 or 2 character string into equivalant byte value - - 1 or 2 character string - byte - - - - Convert a float value to a byte given a minimum and maximum range - - Value to convert to a byte - Minimum value range - Maximum value range - A single byte representing the original float value - - - - Convert a byte to a float value given a minimum and maximum range - - Byte array to get the byte from - Position in the byte array the desired byte is at - Minimum value range - Maximum value range - A float value inclusively between lower and upper - - - - Convert a byte to a float value given a minimum and maximum range - - Byte to convert to a float value - Minimum value range - Maximum value range - A float value inclusively between lower and upper - - - - Attempts to parse a floating point value from a string, using an - EN-US number format - - String to parse - Resulting floating point number - True if the parse was successful, otherwise false - - - - Attempts to parse a floating point value from a string, using an - EN-US number format - - String to parse - Resulting floating point number - True if the parse was successful, otherwise false - - - - Tries to parse an unsigned 32-bit integer from a hexadecimal string - - String to parse - Resulting integer - True if the parse was successful, otherwise false - - - - Takes an AssetType and returns the string representation - - The source - The string version of the AssetType - - - - Translate a string name of an AssetType into the proper Type - - A string containing the AssetType name - The AssetType which matches the string name, or AssetType.Unknown if no match was found - - - - Convert an InventoryType to a string - - The to convert - A string representation of the source - - - - Convert a string into a valid InventoryType - - A string representation of the InventoryType to convert - A InventoryType object which matched the type - - - - Convert a SaleType to a string - - The to convert - A string representation of the source - - - - Convert a string into a valid SaleType - - A string representation of the SaleType to convert - A SaleType object which matched the type - - - - Copy a byte array - - Byte array to copy - A copy of the given byte array - - - - Packs to 32-bit unsigned integers in to a 64-bit unsigned integer - - The left-hand (or X) value - The right-hand (or Y) value - A 64-bit integer containing the two 32-bit input values - - - - Unpacks two 32-bit unsigned integers from a 64-bit unsigned integer - - The 64-bit input integer - The left-hand (or X) output value - The right-hand (or Y) output value - - - - Convert an IP address object to an unsigned 32-bit integer - - IP address to convert - 32-bit unsigned integer holding the IP address bits - - - - Gets a unix timestamp for the current time - - An unsigned integer representing a unix timestamp for now - - - - Convert a UNIX timestamp to a native DateTime object - - An unsigned integer representing a UNIX - timestamp - A DateTime object containing the same time specified in - the given timestamp - - - - Convert a UNIX timestamp to a native DateTime object - - A signed integer representing a UNIX - timestamp - A DateTime object containing the same time specified in - the given timestamp - - - - Convert a native DateTime object to a UNIX timestamp - - A DateTime object you want to convert to a - timestamp - An unsigned integer representing a UNIX timestamp - - - - Swap two values - - Type of the values to swap - First value - Second value - - - - Try to parse an enumeration value from a string - - Enumeration type - String value to parse - Enumeration value on success - True if the parsing succeeded, otherwise false - - - - Swaps the high and low words in a byte. Converts aaaabbbb to bbbbaaaa - - Byte to swap the words in - Byte value with the words swapped - - - - Attempts to convert a string representation of a hostname or IP - address to a - - Hostname to convert to an IPAddress - Converted IP address object, or null if the conversion - failed - - - Provide a single instance of the CultureInfo class to - help parsing in situations where the grid assumes an en-us - culture - - - UNIX epoch in DateTime format - - - Provide a single instance of the MD5 class to avoid making - duplicate copies and handle thread safety - - - Provide a single instance of the SHA-1 class to avoid - making duplicate copies and handle thread safety - - - Provide a single instance of a random number generator - to avoid making duplicate copies and handle thread safety - - - - Clamp a given value between a range - - Value to clamp - Minimum allowable value - Maximum allowable value - A value inclusively between lower and upper - - - - Clamp a given value between a range - - Value to clamp - Minimum allowable value - Maximum allowable value - A value inclusively between lower and upper - - - - Clamp a given value between a range - - Value to clamp - Minimum allowable value - Maximum allowable value - A value inclusively between lower and upper - - - - Round a floating-point value to the nearest integer - - Floating point number to round - Integer - - - - Test if a single precision float is a finite number - - - - - Test if a double precision float is a finite number - - - - - Get the distance between two floating-point values - - First value - Second value - The distance between the two values - - - - Compute the MD5 hash for a byte array - - Byte array to compute the hash for - MD5 hash of the input data - - - - Compute the SHA1 hash for a byte array - - Byte array to compute the hash for - SHA1 hash of the input data - - - - Calculate the SHA1 hash of a given string - - The string to hash - The SHA1 hash as a string - - - - Compute the SHA256 hash for a byte array - - Byte array to compute the hash for - SHA256 hash of the input data - - - - Calculate the SHA256 hash of a given string - - The string to hash - The SHA256 hash as a string - - - - Calculate the MD5 hash of a given string - - The password to hash - An MD5 hash in string format, with $1$ prepended - - - - Calculate the MD5 hash of a given string - - The string to hash - The MD5 hash as a string - - - - Generate a random double precision floating point value - - Random value of type double - - - - Get the current running platform - - Enumeration of the current platform we are running on - - - - Get the current running runtime - - Enumeration of the current runtime we are running on - - - - Operating system - - - - Unknown - - - Microsoft Windows - - - Microsoft Windows CE - - - Linux - - - Apple OSX - - - - Runtime platform - - - - .NET runtime - - - Mono runtime: http://www.mono-project.com/ - - - - Determines the appropriate events to set, leaves the locks, and sets the events. - - - - - A routine for lazily creating a event outside the lock (so if errors - happen they are outside the lock and that we don't do much work - while holding a spin lock). If all goes well, reenter the lock and - set 'waitEvent' - - - - - Waits on 'waitEvent' with a timeout of 'millisceondsTimeout. - Before the wait 'numWaiters' is incremented and is restored before leaving this routine. - - - - X value - - - Y value - - - Z value - - - W value - - - - Build a quaternion from normalized float values - - X value from -1.0 to 1.0 - Y value from -1.0 to 1.0 - Z value from -1.0 to 1.0 - - - - Constructor, builds a quaternion object from a byte array - - Byte array containing four four-byte floats - Offset in the byte array to start reading at - Whether the source data is normalized or - not. If this is true 12 bytes will be read, otherwise 16 bytes will - be read. - - - - Normalizes the quaternion - - - - - Builds a quaternion object from a byte array - - The source byte array - Offset in the byte array to start reading at - Whether the source data is normalized or - not. If this is true 12 bytes will be read, otherwise 16 bytes will - be read. - - - - Normalize this quaternion and serialize it to a byte array - - A 12 byte array containing normalized X, Y, and Z floating - point values in order using little endian byte ordering - - - - Writes the raw bytes for this quaternion to a byte array - - Destination byte array - Position in the destination array to start - writing. Must be at least 12 bytes before the end of the array - - - - Convert this quaternion to euler angles - - X euler angle - Y euler angle - Z euler angle - - - - Convert this quaternion to an angle around an axis - - Unit vector describing the axis - Angle around the axis, in radians - - - - Returns the conjugate (spatial inverse) of a quaternion - - - - - Build a quaternion from an axis and an angle of rotation around - that axis - - - - - Build a quaternion from an axis and an angle of rotation around - that axis - - Axis of rotation - Angle of rotation - - - - Creates a quaternion from a vector containing roll, pitch, and yaw - in radians - - Vector representation of the euler angles in - radians - Quaternion representation of the euler angles - - - - Creates a quaternion from roll, pitch, and yaw euler angles in - radians - - X angle in radians - Y angle in radians - Z angle in radians - Quaternion representation of the euler angles - - - - Conjugates and renormalizes a vector - - - - - Spherical linear interpolation between two quaternions - - - - - Get a string representation of the quaternion elements with up to three - decimal digits and separated by spaces only - - Raw string representation of the quaternion - - - A quaternion with a value of 0,0,0,1 - - - - The different types of grid assets - - - - Unknown asset type - - - Texture asset, stores in JPEG2000 J2C stream format - - - Sound asset - - - Calling card for another avatar - - - Link to a location in world - - - Collection of textures and parameters that can be - worn by an avatar - - - Primitive that can contain textures, sounds, - scripts and more - - - Notecard asset - - - Holds a collection of inventory items - - - Root inventory folder - - - Linden scripting language script - - - LSO bytecode for a script - - - Uncompressed TGA texture - - - Collection of textures and shape parameters that can - be worn - - - Trash folder - - - Snapshot folder - - - Lost and found folder - - - Uncompressed sound - - - Uncompressed TGA non-square image, not to be used as a - texture - - - Compressed JPEG non-square image, not to be used as a - texture - - - Animation - - - Sequence of animations, sounds, chat, and pauses - - - Simstate file - - - - Inventory Item Types, eg Script, Notecard, Folder, etc - - - - Unknown - - - Texture - - - Sound - - - Calling Card - - - Landmark - - - Notecard - - - - - - Folder - - - - - - an LSL Script - - - - - - - - - - - - - - - - - - - Item Sale Status - - - - Not for sale - - - The original is for sale - - - Copies are for sale - - - The contents of the object are for sale - - - - Types of wearable assets - - - - Body shape - - - Skin textures and attributes - - - Hair - - - Eyes - - - Shirt - - - Pants - - - Shoes - - - Socks - - - Jacket - - - Gloves - - - Undershirt - - - Underpants - - - Skirt - - - Invalid wearable asset - - - - Copy constructor - - Circular queue to copy - - - - A 128-bit Universally Unique Identifier, used throughout the Second - Life networking protocol - - - - The System.Guid object this struct wraps around - - - - Constructor that takes a string UUID representation - - A string representation of a UUID, case - insensitive and can either be hyphenated or non-hyphenated - UUID("11f8aa9c-b071-4242-836b-13b7abe0d489") - - - - Constructor that takes a System.Guid object - - A Guid object that contains the unique identifier - to be represented by this UUID - - - - Constructor that takes a byte array containing a UUID - - Byte array containing a 16 byte UUID - Beginning offset in the array - - - - Constructor that takes an unsigned 64-bit unsigned integer to - convert to a UUID - - 64-bit unsigned integer to convert to a UUID - - - - Copy constructor - - UUID to copy - - - - IComparable.CompareTo implementation - - - - - Assigns this UUID from 16 bytes out of a byte array - - Byte array containing the UUID to assign this UUID to - Starting position of the UUID in the byte array - - - - Returns a copy of the raw bytes for this UUID - - A 16 byte array containing this UUID - - - - Writes the raw bytes for this UUID to a byte array - - Destination byte array - Position in the destination array to start - writing. Must be at least 16 bytes before the end of the array - - - - Calculate an LLCRC (cyclic redundancy check) for this UUID - - The CRC checksum for this UUID - - - - Create a 64-bit integer representation from the second half of this UUID - - An integer created from the last eight bytes of this UUID - - - - Generate a UUID from a string - - A string representation of a UUID, case - insensitive and can either be hyphenated or non-hyphenated - UUID.Parse("11f8aa9c-b071-4242-836b-13b7abe0d489") - - - - Generate a UUID from a string - - A string representation of a UUID, case - insensitive and can either be hyphenated or non-hyphenated - Will contain the parsed UUID if successful, - otherwise null - True if the string was successfully parse, otherwise false - UUID.TryParse("11f8aa9c-b071-4242-836b-13b7abe0d489", result) - - - - Combine two UUIDs together by taking the MD5 hash of a byte array - containing both UUIDs - - First UUID to combine - Second UUID to combine - The UUID product of the combination - - - - - - - - - - Return a hash code for this UUID, used by .NET for hash tables - - An integer composed of all the UUID bytes XORed together - - - - Comparison function - - An object to compare to this UUID - True if the object is a UUID and both UUIDs are equal - - - - Comparison function - - UUID to compare to - True if the UUIDs are equal, otherwise false - - - - Get a hyphenated string representation of this UUID - - A string representation of this UUID, lowercase and - with hyphens - 11f8aa9c-b071-4242-836b-13b7abe0d489 - - - - Equals operator - - First UUID for comparison - Second UUID for comparison - True if the UUIDs are byte for byte equal, otherwise false - - - - Not equals operator - - First UUID for comparison - Second UUID for comparison - True if the UUIDs are not equal, otherwise true - - - - XOR operator - - First UUID - Second UUID - A UUID that is a XOR combination of the two input UUIDs - - - - String typecasting operator - - A UUID in string form. Case insensitive, - hyphenated or non-hyphenated - A UUID built from the string representation - - - An UUID with a value of all zeroes - - - + + + + OpenMetaverseTypes + + + + + A hierarchical token bucket for bandwidth throttling. See + http://en.wikipedia.org/wiki/Token_bucket for more information + + + + Parent bucket to this bucket, or null if this is a root + bucket + + + Size of the bucket in bytes. If zero, the bucket has + infinite capacity + + + Rate that the bucket fills, in bytes per millisecond. If + zero, the bucket always remains full + + + Number of tokens currently in the bucket + + + Time of the last drip, in system ticks + + + + Default constructor + + Parent bucket if this is a child bucket, or + null if this is a root bucket + Maximum size of the bucket in bytes, or + zero if this bucket has no maximum capacity + Rate that the bucket fills, in bytes per + second. If zero, the bucket always remains full + + + + Remove a given number of tokens from the bucket + + Number of tokens to remove from the bucket + True if the requested number of tokens were removed from + the bucket, otherwise false + + + + Remove a given number of tokens from the bucket + + Number of tokens to remove from the bucket + True if tokens were added to the bucket + during this call, otherwise false + True if the requested number of tokens were removed from + the bucket, otherwise false + + + + Add tokens to the bucket over time. The number of tokens added each + call depends on the length of time that has passed since the last + call to Drip + + True if tokens were added to the bucket, otherwise false + + + + The parent bucket of this bucket, or null if this bucket has no + parent. The parent bucket will limit the aggregate bandwidth of all + of its children buckets + + + + + Maximum burst rate in bytes per second. This is the maximum number + of tokens that can accumulate in the bucket at any one time + + + + + The speed limit of this bucket in bytes per second. This is the + number of tokens that are added to the bucket per second + + Tokens are added to the bucket any time + is called, at the granularity of + the system tick interval (typically around 15-22ms) + + + + The number of bytes that can be sent at this moment. This is the + current number of tokens in the bucket + If this bucket has a parent bucket that does not have + enough tokens for a request, will + return false regardless of the content of this bucket + + + + X value + + + Y value + + + Z value + + + W value + + + + Build a quaternion from normalized float values + + X value from -1.0 to 1.0 + Y value from -1.0 to 1.0 + Z value from -1.0 to 1.0 + + + + Constructor, builds a quaternion object from a byte array + + Byte array containing four four-byte floats + Offset in the byte array to start reading at + Whether the source data is normalized or + not. If this is true 12 bytes will be read, otherwise 16 bytes will + be read. + + + + Normalizes the quaternion + + + + + Builds a quaternion object from a byte array + + The source byte array + Offset in the byte array to start reading at + Whether the source data is normalized or + not. If this is true 12 bytes will be read, otherwise 16 bytes will + be read. + + + + Normalize this quaternion and serialize it to a byte array + + A 12 byte array containing normalized X, Y, and Z floating + point values in order using little endian byte ordering + + + + Writes the raw bytes for this quaternion to a byte array + + Destination byte array + Position in the destination array to start + writing. Must be at least 12 bytes before the end of the array + + + + Convert this quaternion to euler angles + + X euler angle + Y euler angle + Z euler angle + + + + Convert this quaternion to an angle around an axis + + Unit vector describing the axis + Angle around the axis, in radians + + + + Returns the conjugate (spatial inverse) of a quaternion + + + + + Build a quaternion from an axis and an angle of rotation around + that axis + + + + + Build a quaternion from an axis and an angle of rotation around + that axis + + Axis of rotation + Angle of rotation + + + + Creates a quaternion from a vector containing roll, pitch, and yaw + in radians + + Vector representation of the euler angles in + radians + Quaternion representation of the euler angles + + + + Creates a quaternion from roll, pitch, and yaw euler angles in + radians + + X angle in radians + Y angle in radians + Z angle in radians + Quaternion representation of the euler angles + + + + Conjugates and renormalizes a vector + + + + + Spherical linear interpolation between two quaternions + + + + + Get a string representation of the quaternion elements with up to three + decimal digits and separated by spaces only + + Raw string representation of the quaternion + + + A quaternion with a value of 0,0,0,1 + + + + Same as Queue except Dequeue function blocks until there is an object to return. + Note: This class does not need to be synchronized + + + + + Create new BlockingQueue. + + The System.Collections.ICollection to copy elements from + + + + Create new BlockingQueue. + + The initial number of elements that the queue can contain + + + + Create new BlockingQueue. + + + + + BlockingQueue Destructor (Close queue, resume any waiting thread). + + + + + Remove all objects from the Queue. + + + + + Remove all objects from the Queue, resume all dequeue threads. + + + + + Removes and returns the object at the beginning of the Queue. + + Object in queue. + + + + Removes and returns the object at the beginning of the Queue. + + time to wait before returning + Object in queue. + + + + Removes and returns the object at the beginning of the Queue. + + time to wait before returning (in milliseconds) + Object in queue. + + + + Adds an object to the end of the Queue + + Object to put in queue + + + + Open Queue. + + + + + Gets flag indicating if queue has been closed. + + + + Used for converting degrees to radians + + + Used for converting radians to degrees + + + Provide a single instance of the CultureInfo class to + help parsing in situations where the grid assumes an en-us + culture + + + UNIX epoch in DateTime format + + + Provide a single instance of the MD5 class to avoid making + duplicate copies and handle thread safety + + + Provide a single instance of the SHA-1 class to avoid + making duplicate copies and handle thread safety + + + Provide a single instance of a random number generator + to avoid making duplicate copies and handle thread safety + + + + Clamp a given value between a range + + Value to clamp + Minimum allowable value + Maximum allowable value + A value inclusively between lower and upper + + + + Clamp a given value between a range + + Value to clamp + Minimum allowable value + Maximum allowable value + A value inclusively between lower and upper + + + + Clamp a given value between a range + + Value to clamp + Minimum allowable value + Maximum allowable value + A value inclusively between lower and upper + + + + Round a floating-point value to the nearest integer + + Floating point number to round + Integer + + + + Test if a single precision float is a finite number + + + + + Test if a double precision float is a finite number + + + + + Get the distance between two floating-point values + + First value + Second value + The distance between the two values + + + + Compute the MD5 hash for a byte array + + Byte array to compute the hash for + MD5 hash of the input data + + + + Compute the SHA1 hash for a byte array + + Byte array to compute the hash for + SHA1 hash of the input data + + + + Calculate the SHA1 hash of a given string + + The string to hash + The SHA1 hash as a string + + + + Compute the SHA256 hash for a byte array + + Byte array to compute the hash for + SHA256 hash of the input data + + + + Calculate the SHA256 hash of a given string + + The string to hash + The SHA256 hash as a string + + + + Calculate the MD5 hash of a given string + + The password to hash + An MD5 hash in string format, with $1$ prepended + + + + Calculate the MD5 hash of a given string + + The string to hash + The MD5 hash as a string + + + + Generate a random double precision floating point value + + Random value of type double + + + + Get the current running platform + + Enumeration of the current platform we are running on + + + + Get the current running runtime + + Enumeration of the current runtime we are running on + + + + Convert the first two bytes starting in the byte array in + little endian ordering to a signed short integer + + An array two bytes or longer + A signed short integer, will be zero if a short can't be + read at the given position + + + + Convert the first two bytes starting at the given position in + little endian ordering to a signed short integer + + An array two bytes or longer + Position in the array to start reading + A signed short integer, will be zero if a short can't be + read at the given position + + + + Convert the first four bytes starting at the given position in + little endian ordering to a signed integer + + An array four bytes or longer + Position to start reading the int from + A signed integer, will be zero if an int can't be read + at the given position + + + + Convert the first four bytes of the given array in little endian + ordering to a signed integer + + An array four bytes or longer + A signed integer, will be zero if the array contains + less than four bytes + + + + Convert the first eight bytes of the given array in little endian + ordering to a signed long integer + + An array eight bytes or longer + A signed long integer, will be zero if the array contains + less than eight bytes + + + + Convert the first eight bytes starting at the given position in + little endian ordering to a signed long integer + + An array eight bytes or longer + Position to start reading the long from + A signed long integer, will be zero if a long can't be read + at the given position + + + + Convert the first two bytes starting at the given position in + little endian ordering to an unsigned short + + Byte array containing the ushort + Position to start reading the ushort from + An unsigned short, will be zero if a ushort can't be read + at the given position + + + + Convert two bytes in little endian ordering to an unsigned short + + Byte array containing the ushort + An unsigned short, will be zero if a ushort can't be + read + + + + Convert the first four bytes starting at the given position in + little endian ordering to an unsigned integer + + Byte array containing the uint + Position to start reading the uint from + An unsigned integer, will be zero if a uint can't be read + at the given position + + + + Convert the first four bytes of the given array in little endian + ordering to an unsigned integer + + An array four bytes or longer + An unsigned integer, will be zero if the array contains + less than four bytes + + + + Convert the first eight bytes of the given array in little endian + ordering to an unsigned 64-bit integer + + An array eight bytes or longer + An unsigned 64-bit integer, will be zero if the array + contains less than eight bytes + + + + Convert four bytes in little endian ordering to a floating point + value + + Byte array containing a little ending floating + point value + Starting position of the floating point value in + the byte array + Single precision value + + + + Convert an integer to a byte array in little endian format + + The integer to convert + A four byte little endian array + + + + Convert an integer to a byte array in big endian format + + The integer to convert + A four byte big endian array + + + + Convert a 64-bit integer to a byte array in little endian format + + The value to convert + An 8 byte little endian array + + + + Convert a 64-bit unsigned integer to a byte array in little endian + format + + The value to convert + An 8 byte little endian array + + + + Convert a floating point value to four bytes in little endian + ordering + + A floating point value + A four byte array containing the value in little endian + ordering + + + + Converts an unsigned integer to a hexadecimal string + + An unsigned integer to convert to a string + A hexadecimal string 10 characters long + 0x7fffffff + + + + Convert a variable length UTF8 byte array to a string + + The UTF8 encoded byte array to convert + The decoded string + + + + Converts a byte array to a string containing hexadecimal characters + + The byte array to convert to a string + The name of the field to prepend to each + line of the string + A string containing hexadecimal characters on multiple + lines. Each line is prepended with the field name + + + + Converts a byte array to a string containing hexadecimal characters + + The byte array to convert to a string + Number of bytes in the array to parse + A string to prepend to each line of the hex + dump + A string containing hexadecimal characters on multiple + lines. Each line is prepended with the field name + + + + Convert a string to a UTF8 encoded byte array + + The string to convert + A null-terminated UTF8 byte array + + + + Converts a string containing hexadecimal characters to a byte array + + String containing hexadecimal characters + If true, gracefully handles null, empty and + uneven strings as well as stripping unconvertable characters + The converted byte array + + + + Returns true is c is a hexadecimal digit (A-F, a-f, 0-9) + + Character to test + true if hex digit, false if not + + + + Converts 1 or 2 character string into equivalant byte value + + 1 or 2 character string + byte + + + + Convert a float value to a byte given a minimum and maximum range + + Value to convert to a byte + Minimum value range + Maximum value range + A single byte representing the original float value + + + + Convert a byte to a float value given a minimum and maximum range + + Byte array to get the byte from + Position in the byte array the desired byte is at + Minimum value range + Maximum value range + A float value inclusively between lower and upper + + + + Convert a byte to a float value given a minimum and maximum range + + Byte to convert to a float value + Minimum value range + Maximum value range + A float value inclusively between lower and upper + + + + Attempts to parse a floating point value from a string, using an + EN-US number format + + String to parse + Resulting floating point number + True if the parse was successful, otherwise false + + + + Attempts to parse a floating point value from a string, using an + EN-US number format + + String to parse + Resulting floating point number + True if the parse was successful, otherwise false + + + + Tries to parse an unsigned 32-bit integer from a hexadecimal string + + String to parse + Resulting integer + True if the parse was successful, otherwise false + + + + Takes an AssetType and returns the string representation + + The source + The string version of the AssetType + + + + Translate a string name of an AssetType into the proper Type + + A string containing the AssetType name + The AssetType which matches the string name, or AssetType.Unknown if no match was found + + + + Convert an InventoryType to a string + + The to convert + A string representation of the source + + + + Convert a string into a valid InventoryType + + A string representation of the InventoryType to convert + A InventoryType object which matched the type + + + + Convert a SaleType to a string + + The to convert + A string representation of the source + + + + Convert a string into a valid SaleType + + A string representation of the SaleType to convert + A SaleType object which matched the type + + + + Copy a byte array + + Byte array to copy + A copy of the given byte array + + + + Packs to 32-bit unsigned integers in to a 64-bit unsigned integer + + The left-hand (or X) value + The right-hand (or Y) value + A 64-bit integer containing the two 32-bit input values + + + + Unpacks two 32-bit unsigned integers from a 64-bit unsigned integer + + The 64-bit input integer + The left-hand (or X) output value + The right-hand (or Y) output value + + + + Convert an IP address object to an unsigned 32-bit integer + + IP address to convert + 32-bit unsigned integer holding the IP address bits + + + + Gets a unix timestamp for the current time + + An unsigned integer representing a unix timestamp for now + + + + Convert a UNIX timestamp to a native DateTime object + + An unsigned integer representing a UNIX + timestamp + A DateTime object containing the same time specified in + the given timestamp + + + + Convert a UNIX timestamp to a native DateTime object + + A signed integer representing a UNIX + timestamp + A DateTime object containing the same time specified in + the given timestamp + + + + Convert a native DateTime object to a UNIX timestamp + + A DateTime object you want to convert to a + timestamp + An unsigned integer representing a UNIX timestamp + + + + Swap two values + + Type of the values to swap + First value + Second value + + + + Try to parse an enumeration value from a string + + Enumeration type + String value to parse + Enumeration value on success + True if the parsing succeeded, otherwise false + + + + Swaps the high and low words in a byte. Converts aaaabbbb to bbbbaaaa + + Byte to swap the words in + Byte value with the words swapped + + + + Attempts to convert a string representation of a hostname or IP + address to a + + Hostname to convert to an IPAddress + Converted IP address object, or null if the conversion + failed + + + + Operating system + + + + Unknown + + + Microsoft Windows + + + Microsoft Windows CE + + + Linux + + + Apple OSX + + + + Runtime platform + + + + .NET runtime + + + Mono runtime: http://www.mono-project.com/ + + + + Convert this matrix to euler rotations + + X euler angle + Y euler angle + Z euler angle + + + + Convert this matrix to a quaternion rotation + + A quaternion representation of this rotation matrix + + + + Construct a matrix from euler rotation values in radians + + X euler angle in radians + Y euler angle in radians + Z euler angle in radians + + + + Get a formatted string representation of the vector + + A string representation of the vector + + + A 4x4 matrix containing all zeroes + + + A 4x4 identity matrix + + + For thread safety + + + For thread safety + + + + Purges expired objects from the cache. Called automatically by the purge timer. + + + + X value + + + Y value + + + Z value + + + W value + + + + Constructor, builds a vector from a byte array + + Byte array containing four four-byte floats + Beginning position in the byte array + + + + Test if this vector is equal to another vector, within a given + tolerance range + + Vector to test against + The acceptable magnitude of difference + between the two vectors + True if the magnitude of difference between the two vectors + is less than the given tolerance, otherwise false + + + + IComparable.CompareTo implementation + + + + + Test if this vector is composed of all finite numbers + + + + + Builds a vector from a byte array + + Byte array containing a 16 byte vector + Beginning position in the byte array + + + + Returns the raw bytes for this vector + + A 16 byte array containing X, Y, Z, and W + + + + Writes the raw bytes for this vector to a byte array + + Destination byte array + Position in the destination array to start + writing. Must be at least 16 bytes before the end of the array + + + + Get a string representation of the vector elements with up to three + decimal digits and separated by spaces only + + Raw string representation of the vector + + + A vector with a value of 0,0,0,0 + + + A vector with a value of 1,1,1,1 + + + A vector with a value of 1,0,0,0 + + + A vector with a value of 0,1,0,0 + + + A vector with a value of 0,0,1,0 + + + A vector with a value of 0,0,0,1 + + + + Provides helper methods for parallelizing loops + + + + + Executes a for loop in which iterations may run in parallel + + The loop will be started at this index + The loop will be terminated before this index is reached + Method body to run for each iteration of the loop + + + + Executes a for loop in which iterations may run in parallel + + The number of concurrent execution threads to run + The loop will be started at this index + The loop will be terminated before this index is reached + Method body to run for each iteration of the loop + + + + Executes a foreach loop in which iterations may run in parallel + + Object type that the collection wraps + An enumerable collection to iterate over + Method body to run for each object in the collection + + + + Executes a foreach loop in which iterations may run in parallel + + Object type that the collection wraps + The number of concurrent execution threads to run + An enumerable collection to iterate over + Method body to run for each object in the collection + + + + Executes a series of tasks in parallel + + A series of method bodies to execute + + + + Executes a series of tasks in parallel + + The number of concurrent execution threads to run + A series of method bodies to execute + + + + A three-dimensional vector with floating-point values + + + + X value + + + Y value + + + Z value + + + + Constructor, builds a vector from a byte array + + Byte array containing three four-byte floats + Beginning position in the byte array + + + + Test if this vector is equal to another vector, within a given + tolerance range + + Vector to test against + The acceptable magnitude of difference + between the two vectors + True if the magnitude of difference between the two vectors + is less than the given tolerance, otherwise false + + + + IComparable.CompareTo implementation + + + + + Test if this vector is composed of all finite numbers + + + + + Builds a vector from a byte array + + Byte array containing a 12 byte vector + Beginning position in the byte array + + + + Returns the raw bytes for this vector + + A 12 byte array containing X, Y, and Z + + + + Writes the raw bytes for this vector to a byte array + + Destination byte array + Position in the destination array to start + writing. Must be at least 12 bytes before the end of the array + + + + Parse a vector from a string + + A string representation of a 3D vector, enclosed + in arrow brackets and separated by commas + + + + Calculate the rotation between two vectors + + Normalized directional vector (such as 1,0,0 for forward facing) + Normalized target vector + + + + Interpolates between two vectors using a cubic equation + + + + + Get a formatted string representation of the vector + + A string representation of the vector + + + + Get a string representation of the vector elements with up to three + decimal digits and separated by spaces only + + Raw string representation of the vector + + + + Cross product between two vectors + + + + A vector with a value of 0,0,0 + + + A vector with a value of 1,1,1 + + + A unit vector facing forward (X axis), value 1,0,0 + + + A unit vector facing left (Y axis), value 0,1,0 + + + A unit vector facing up (Z axis), value 0,0,1 + + + + A 128-bit Universally Unique Identifier, used throughout the Second + Life networking protocol + + + + The System.Guid object this struct wraps around + + + + Constructor that takes a string UUID representation + + A string representation of a UUID, case + insensitive and can either be hyphenated or non-hyphenated + UUID("11f8aa9c-b071-4242-836b-13b7abe0d489") + + + + Constructor that takes a System.Guid object + + A Guid object that contains the unique identifier + to be represented by this UUID + + + + Constructor that takes a byte array containing a UUID + + Byte array containing a 16 byte UUID + Beginning offset in the array + + + + Constructor that takes an unsigned 64-bit unsigned integer to + convert to a UUID + + 64-bit unsigned integer to convert to a UUID + + + + Copy constructor + + UUID to copy + + + + IComparable.CompareTo implementation + + + + + Assigns this UUID from 16 bytes out of a byte array + + Byte array containing the UUID to assign this UUID to + Starting position of the UUID in the byte array + + + + Returns a copy of the raw bytes for this UUID + + A 16 byte array containing this UUID + + + + Writes the raw bytes for this UUID to a byte array + + Destination byte array + Position in the destination array to start + writing. Must be at least 16 bytes before the end of the array + + + + Calculate an LLCRC (cyclic redundancy check) for this UUID + + The CRC checksum for this UUID + + + + Create a 64-bit integer representation from the second half of this UUID + + An integer created from the last eight bytes of this UUID + + + + Generate a UUID from a string + + A string representation of a UUID, case + insensitive and can either be hyphenated or non-hyphenated + UUID.Parse("11f8aa9c-b071-4242-836b-13b7abe0d489") + + + + Generate a UUID from a string + + A string representation of a UUID, case + insensitive and can either be hyphenated or non-hyphenated + Will contain the parsed UUID if successful, + otherwise null + True if the string was successfully parse, otherwise false + UUID.TryParse("11f8aa9c-b071-4242-836b-13b7abe0d489", result) + + + + Combine two UUIDs together by taking the MD5 hash of a byte array + containing both UUIDs + + First UUID to combine + Second UUID to combine + The UUID product of the combination + + + + + + + + + + Return a hash code for this UUID, used by .NET for hash tables + + An integer composed of all the UUID bytes XORed together + + + + Comparison function + + An object to compare to this UUID + True if the object is a UUID and both UUIDs are equal + + + + Comparison function + + UUID to compare to + True if the UUIDs are equal, otherwise false + + + + Get a hyphenated string representation of this UUID + + A string representation of this UUID, lowercase and + with hyphens + 11f8aa9c-b071-4242-836b-13b7abe0d489 + + + + Equals operator + + First UUID for comparison + Second UUID for comparison + True if the UUIDs are byte for byte equal, otherwise false + + + + Not equals operator + + First UUID for comparison + Second UUID for comparison + True if the UUIDs are not equal, otherwise true + + + + XOR operator + + First UUID + Second UUID + A UUID that is a XOR combination of the two input UUIDs + + + + String typecasting operator + + A UUID in string form. Case insensitive, + hyphenated or non-hyphenated + A UUID built from the string representation + + + An UUID with a value of all zeroes + + + A cache of UUID.Zero as a string to optimize a common path + + + + A two-dimensional vector with floating-point values + + + + X value + + + Y value + + + + Test if this vector is equal to another vector, within a given + tolerance range + + Vector to test against + The acceptable magnitude of difference + between the two vectors + True if the magnitude of difference between the two vectors + is less than the given tolerance, otherwise false + + + + Test if this vector is composed of all finite numbers + + + + + IComparable.CompareTo implementation + + + + + Builds a vector from a byte array + + Byte array containing two four-byte floats + Beginning position in the byte array + + + + Returns the raw bytes for this vector + + An eight-byte array containing X and Y + + + + Writes the raw bytes for this vector to a byte array + + Destination byte array + Position in the destination array to start + writing. Must be at least 8 bytes before the end of the array + + + + Parse a vector from a string + + A string representation of a 2D vector, enclosed + in arrow brackets and separated by commas + + + + Interpolates between two vectors using a cubic equation + + + + + Get a formatted string representation of the vector + + A string representation of the vector + + + + Get a string representation of the vector elements with up to three + decimal digits and separated by spaces only + + Raw string representation of the vector + + + A vector with a value of 0,0 + + + A vector with a value of 1,1 + + + A vector with a value of 1,0 + + + A vector with a value of 0,1 + + + + An 8-bit color structure including an alpha channel + + + + Red + + + Green + + + Blue + + + Alpha + + + + + + + + + + + + + Builds a color from a byte array + + Byte array containing a 16 byte color + Beginning position in the byte array + True if the byte array stores inverted values, + otherwise false. For example the color black (fully opaque) inverted + would be 0xFF 0xFF 0xFF 0x00 + + + + Returns the raw bytes for this vector + + Byte array containing a 16 byte color + Beginning position in the byte array + True if the byte array stores inverted values, + otherwise false. For example the color black (fully opaque) inverted + would be 0xFF 0xFF 0xFF 0x00 + True if the alpha value is inverted in + addition to whatever the inverted parameter is. Setting inverted true + and alphaInverted true will flip the alpha value back to non-inverted, + but keep the other color bytes inverted + A 16 byte array containing R, G, B, and A + + + + Copy constructor + + Color to copy + + + + IComparable.CompareTo implementation + + Sorting ends up like this: |--Grayscale--||--Color--|. + Alpha is only used when the colors are otherwise equivalent + + + + Builds a color from a byte array + + Byte array containing a 16 byte color + Beginning position in the byte array + True if the byte array stores inverted values, + otherwise false. For example the color black (fully opaque) inverted + would be 0xFF 0xFF 0xFF 0x00 + True if the alpha value is inverted in + addition to whatever the inverted parameter is. Setting inverted true + and alphaInverted true will flip the alpha value back to non-inverted, + but keep the other color bytes inverted + + + + Writes the raw bytes for this color to a byte array + + Destination byte array + Position in the destination array to start + writing. Must be at least 16 bytes before the end of the array + + + + Serializes this color into four bytes in a byte array + + Destination byte array + Position in the destination array to start + writing. Must be at least 4 bytes before the end of the array + True to invert the output (1.0 becomes 0 + instead of 255) + + + + Writes the raw bytes for this color to a byte array + + Destination byte array + Position in the destination array to start + writing. Must be at least 16 bytes before the end of the array + + + + Ensures that values are in range 0-1 + + + + + Create an RGB color from a hue, saturation, value combination + + Hue + Saturation + Value + An fully opaque RGB color (alpha is 1.0) + + + + Performs linear interpolation between two colors + + Color to start at + Color to end at + Amount to interpolate + The interpolated color + + + A Color4 with zero RGB values and fully opaque (alpha 1.0) + + + A Color4 with full RGB values (1.0) and fully opaque (alpha 1.0) + + + + The different types of grid assets + + + + Unknown asset type + + + Texture asset, stores in JPEG2000 J2C stream format + + + Sound asset + + + Calling card for another avatar + + + Link to a location in world + + + Collection of textures and parameters that can be + worn by an avatar + + + Primitive that can contain textures, sounds, + scripts and more + + + Notecard asset + + + Holds a collection of inventory items + + + Root inventory folder + + + Linden scripting language script + + + LSO bytecode for a script + + + Uncompressed TGA texture + + + Collection of textures and shape parameters that can + be worn + + + Trash folder + + + Snapshot folder + + + Lost and found folder + + + Uncompressed sound + + + Uncompressed TGA non-square image, not to be used as a + texture + + + Compressed JPEG non-square image, not to be used as a + texture + + + Animation + + + Sequence of animations, sounds, chat, and pauses + + + Simstate file + + + Contains landmarks for favorites + + + Asset is a link to another inventory item + + + Asset is a link to another inventory folder + + + Beginning of the range reserved for ensembles + + + End of the range reserved for ensembles + + + Folder containing inventory links to wearables and attachments + that are part of the current outfit + + + Folder containing inventory items or links to + inventory items of wearables and attachments + together make a full outfit + + + Root folder for the folders of type OutfitFolder + + + + + + + Inventory Item Types, eg Script, Notecard, Folder, etc + + + + Unknown + + + Texture + + + Sound + + + Calling Card + + + Landmark + + + Notecard + + + + + + Folder + + + + + + an LSL Script + + + + + + + + + + + + + + + + + + + Item Sale Status + + + + Not for sale + + + The original is for sale + + + Copies are for sale + + + The contents of the object are for sale + + + + Types of wearable assets + + + + Body shape + + + Skin textures and attributes + + + Hair + + + Eyes + + + Shirt + + + Pants + + + Shoes + + + Socks + + + Jacket + + + Gloves + + + Undershirt + + + Underpants + + + Skirt + + + Alpha mask to hide parts of the avatar + + + Tattoo + + + Invalid wearable asset + + + + A three-dimensional vector with doubleing-point values + + + + X value + + + Y value + + + Z value + + + + Constructor, builds a vector from a byte array + + Byte array containing three eight-byte doubles + Beginning position in the byte array + + + + Test if this vector is equal to another vector, within a given + tolerance range + + Vector to test against + The acceptable magnitude of difference + between the two vectors + True if the magnitude of difference between the two vectors + is less than the given tolerance, otherwise false + + + + IComparable.CompareTo implementation + + + + + Test if this vector is composed of all finite numbers + + + + + Builds a vector from a byte array + + Byte array containing a 24 byte vector + Beginning position in the byte array + + + + Returns the raw bytes for this vector + + A 24 byte array containing X, Y, and Z + + + + Writes the raw bytes for this vector to a byte array + + Destination byte array + Position in the destination array to start + writing. Must be at least 24 bytes before the end of the array + + + + Parse a vector from a string + + A string representation of a 3D vector, enclosed + in arrow brackets and separated by commas + + + + Interpolates between two vectors using a cubic equation + + + + + Get a formatted string representation of the vector + + A string representation of the vector + + + + Get a string representation of the vector elements with up to three + decimal digits and separated by spaces only + + Raw string representation of the vector + + + + Cross product between two vectors + + + + A vector with a value of 0,0,0 + + + A vector with a value of 1,1,1 + + + A unit vector facing forward (X axis), value of 1,0,0 + + + A unit vector facing left (Y axis), value of 0,1,0 + + + A unit vector facing up (Z axis), value of 0,0,1 + + + + Determines the appropriate events to set, leaves the locks, and sets the events. + + + + + A routine for lazily creating a event outside the lock (so if errors + happen they are outside the lock and that we don't do much work + while holding a spin lock). If all goes well, reenter the lock and + set 'waitEvent' + + + + + Waits on 'waitEvent' with a timeout of 'millisceondsTimeout. + Before the wait 'numWaiters' is incremented and is restored before leaving this routine. + + + + + Copy constructor + + Circular queue to copy + + + diff --git a/bin/OpenMetaverseTypes.dll b/bin/OpenMetaverseTypes.dll index 6c6440ea5b..01dc3d813c 100644 Binary files a/bin/OpenMetaverseTypes.dll and b/bin/OpenMetaverseTypes.dll differ diff --git a/bin/OpenSim.ini.example b/bin/OpenSim.ini.example index 5dcc601481..54c013a769 100644 --- a/bin/OpenSim.ini.example +++ b/bin/OpenSim.ini.example @@ -1245,6 +1245,11 @@ ; enabled=false +[MediaOnAPrim] + ; Enable media on a prim facilities + Enabled = true; + + ;; ;; These are defaults that are overwritten below in [Architecture]. ;; These defaults allow OpenSim to work out of the box with diff --git a/prebuild.xml b/prebuild.xml index 8a6d3a1e7a..94c83f7db1 100644 --- a/prebuild.xml +++ b/prebuild.xml @@ -2214,6 +2214,7 @@ +