Merge branch 'master' of ssh://opensimulator.org/var/git/opensim

bin/OpenSim.ini.example

@@ -635,50 +635,13 @@
 
     ;; You need to load a local service for a standalone, and a remote service
     ;; for a grid region. Use one of the lines below, as appropriate
-    ;; If you're using Freeswitch on a standalone then you will also need to configure the [FreeswitchService] section
+    ;; If you're using Freeswitch on a standalone then you will also need to configure the [FreeswitchService] section in config-include/StandaloneCommon.ini
     ; LocalServiceModule = OpenSim.Services.FreeswitchService.dll:FreeswitchService
     ; LocalServiceModule = OpenSim.Services.Connectors.dll:RemoteFreeswitchConnector
 
     ;; If using a remote connector, specify the server URL
     ; FreeswitchServiceURL = http://my.grid.server:8004/fsapi
 
-
-[FreeswitchService]
-    ;; !!!!!!!!!!!!!!!!!!!!!!!!!!!
-    ;; !!!!!!STANDALONE ONLY!!!!!!
-    ;; !!!!!!!!!!!!!!!!!!!!!!!!!!!
-    ;; The IP address of your FreeSWITCH server.  The common case is for this to be the same as the server running the OpenSim standalone
-    ;; This has to be set for the FreeSWITCH service to work
-    ;ServerAddress = 127.0.0.1
-
-    ;; The following configuration parameters are optional
-
-    ;; By default, this is the same as the ServerAddress
-    ; Realm = 127.0.0.1
-
-    ;; By default, this is the same as the ServerAddress on port 5060
-    ; SIPProxy = 127.0.0.1:5060
-
-    ;; Default is 5000ms
-    ; DefaultTimeout = 5000
-
-    ;; The dial plan context.  Default is "default"
-    ; Context = default
-
-    ;; Currently unused
-    ; UserName = freeswitch
-
-    ;; Currently unused
-    ; Password = password
-
-    ;; The following parameters are for STUN = Simple Traversal of UDP through NATs
-    ;; See http://wiki.freeswitch.org/wiki/NAT_Traversal
-    ;; stun.freeswitch.org is not guaranteed to be running so use it in
-    ;; production at your own risk    
-    ; EchoServer = 127.0.0.1
-    ; EchoPort = 50505
-    ; AttemptSTUN = false
-
 [Groups]
     ;# {Enabled} {} {Enable groups?} {true false} false
     ;; Enables the groups module

bin/Robust.HG.ini.example

@@ -107,6 +107,7 @@ ServiceConnectors = "8003/OpenSim.Server.Handlers.dll:AssetServiceConnector,8003
     LocalServiceModule = "OpenSim.Services.FreeswitchService.dll:FreeswitchService"
 
     ;; The IP address of your FreeSWITCH server.
+    ;; This address must be reachable by viewers.
     ; ServerAddress = 127.0.0.1
 
     ;; The following configuration parameters are optional

bin/Robust.ini.example

@@ -21,7 +21,6 @@ ServiceConnectors = "8003/OpenSim.Server.Handlers.dll:AssetServiceConnector,8003
 [Network]
     port = 8003
 
-
     ; HTTPS for "Out of band" management applications such as the remote admin
     ; module. May specify https_main = True to make the main http server
     ; use https or "False" to make the main server HTTP
@@ -92,6 +91,7 @@ ServiceConnectors = "8003/OpenSim.Server.Handlers.dll:AssetServiceConnector,8003
     LocalServiceModule = "OpenSim.Services.FreeswitchService.dll:FreeswitchService"
 
     ;; The IP address of your FreeSWITCH server.
+    ;; This address must be reachable by viewers.
     ; ServerAddress = 127.0.0.1
 
     ;; The following configuration parameters are optional

bin/config-include/StandaloneCommon.ini.example

@@ -140,6 +140,42 @@
     ;AllowedClients = ""
     ;DeniedClients = ""
 
+[FreeswitchService]
+    ;; If FreeSWITCH is not being used then you don't need to set any of these parameters
+    ;;
+    ;; The IP address of your FreeSWITCH server.  The common case is for this to be the same as the server running the OpenSim standalone
+    ;; This has to be set for the FreeSWITCH service to work
+    ;; This address must be reachable by viewers.
+    ;ServerAddress = 127.0.0.1
+
+    ;; The following configuration parameters are optional
+
+    ;; By default, this is the same as the ServerAddress
+    ; Realm = 127.0.0.1
+
+    ;; By default, this is the same as the ServerAddress on port 5060
+    ; SIPProxy = 127.0.0.1:5060
+
+    ;; Default is 5000ms
+    ; DefaultTimeout = 5000
+
+    ;; The dial plan context.  Default is "default"
+    ; Context = default
+
+    ;; Currently unused
+    ; UserName = freeswitch
+
+    ;; Currently unused
+    ; Password = password
+
+    ;; The following parameters are for STUN = Simple Traversal of UDP through NATs
+    ;; See http://wiki.freeswitch.org/wiki/NAT_Traversal
+    ;; stun.freeswitch.org is not guaranteed to be running so use it in
+    ;; production at your own risk    
+    ; EchoServer = 127.0.0.1
+    ; EchoPort = 50505
+    ; AttemptSTUN = false
+
 [GridInfoService]
     ; These settings are used to return information on a get_grid_info call.
     ; Client launcher scripts and third-party clients make use of this to