diff --git a/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs b/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs index d94abf44ea..eb4d06a95e 100644 --- a/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs +++ b/OpenSim/Region/Physics/BulletSPlugin/BSDynamics.cs @@ -317,7 +317,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin m_VhoverEfficiency = 0; m_VhoverTimescale = 0; m_VehicleBuoyancy = 0; - + m_linearDeflectionEfficiency = 1; m_linearDeflectionTimescale = 1; @@ -366,8 +366,8 @@ namespace OpenSim.Region.Physics.BulletSPlugin m_bankingMix = 1; m_referenceFrame = Quaternion.Identity; - m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY - | VehicleFlag.HOVER_TERRAIN_ONLY + m_flags &= ~(VehicleFlag.HOVER_WATER_ONLY + | VehicleFlag.HOVER_TERRAIN_ONLY | VehicleFlag.HOVER_GLOBAL_HEIGHT | VehicleFlag.HOVER_UP_ONLY); m_flags |= (VehicleFlag.NO_DEFLECTION_UP @@ -575,7 +575,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin Vector3 localInertia = new Vector3(m_vehicleMass, m_vehicleMass, m_vehicleMass); BulletSimAPI.SetMassProps2(Prim.PhysBody.ptr, m_vehicleMass, localInertia); - VDetailLog("{0},BSDynamics.Refresh,frict={1},inert={2},aDamp={3}", + VDetailLog("{0},BSDynamics.Refresh,frict={1},inert={2},aDamp={3}", Prim.LocalID, friction, localInertia, angularDamping); } } @@ -759,13 +759,13 @@ namespace OpenSim.Region.Physics.BulletSPlugin // (http://wiki.secondlife.com/wiki/Category:LSL_Vehicle), the downForce // has a decay factor. This says this force should // be computed with a motor. - VDetailLog("{0},MoveLinear,limitMotorUp,distAbove={1},downForce={2}", + VDetailLog("{0},MoveLinear,limitMotorUp,distAbove={1},downForce={2}", Prim.LocalID, distanceAboveGround, limitMotorUpContribution); } // ================================================================== - Vector3 newVelocity = linearMotorContribution - + terrainHeightContribution + Vector3 newVelocity = linearMotorContribution + + terrainHeightContribution + hoverContribution + limitMotorUpContribution; @@ -801,7 +801,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin } VDetailLog("{0},MoveLinear,done,lmDir={1},lmVel={2},newVel={3},primVel={4},totalDown={5}", - Prim.LocalID, m_linearMotorDirection, m_lastLinearVelocityVector, + Prim.LocalID, m_linearMotorDirection, m_lastLinearVelocityVector, newVelocity, Prim.Velocity, totalDownForce); } // end MoveLinear() @@ -850,139 +850,17 @@ namespace OpenSim.Region.Physics.BulletSPlugin VDetailLog("{0},MoveAngular,noDeflectionUp,angularMotorContrib={1}", Prim.LocalID, angularMotorContribution); } - // ================================================================== - Vector3 verticalAttractionContribution = Vector3.Zero; - // If vertical attaction timescale is reasonable and we applied an angular force last time... - if (m_verticalAttractionTimescale < 500) - { - Vector3 verticalError = Vector3.UnitZ * Prim.ForceOrientation; - verticalError.Normalize(); - m_verticalAttractionMotor.SetCurrent(verticalError); - m_verticalAttractionMotor.SetTarget(Vector3.UnitZ); - verticalAttractionContribution = m_verticalAttractionMotor.Step(pTimestep); - /* - // Take a vector pointing up and convert it from world to vehicle relative coords. - Vector3 verticalError = Vector3.UnitZ * Prim.ForceOrientation; - verticalError.Normalize(); + Vector3 verticalAttractionContribution = ComputeAngularVerticalAttraction(pTimestep); - // If vertical attraction correction is needed, the vector that was pointing up (UnitZ) - // is now leaning to one side (rotated around the X axis) and the Y value will - // go from zero (nearly straight up) to one (completely to the side) or leaning - // front-to-back (rotated around the Y axis) and the value of X will be between - // zero and one. - // The value of Z is how far the rotation is off with 1 meaning none and 0 being 90 degrees. + Vector3 deflectionContribution = ComputeAngularDeflection(pTimestep); - // If verticalError.Z is negative, the vehicle is upside down. Add additional push. - if (verticalError.Z < 0f) - { - verticalError.X = 2f - verticalError.X; - verticalError.Y = 2f - verticalError.Y; - } - - // Y error means needed rotation around X axis and visa versa. - verticalAttractionContribution.X = verticalError.Y; - verticalAttractionContribution.Y = - verticalError.X; - verticalAttractionContribution.Z = 0f; - - // scale by the time scale and timestep - Vector3 unscaledContrib = verticalAttractionContribution; - verticalAttractionContribution /= m_verticalAttractionTimescale; - verticalAttractionContribution *= pTimestep; - - // apply efficiency - Vector3 preEfficiencyContrib = verticalAttractionContribution; - float efficencySquared = m_verticalAttractionEfficiency * m_verticalAttractionEfficiency; - verticalAttractionContribution *= (m_verticalAttractionEfficiency * m_verticalAttractionEfficiency); - - VDetailLog("{0},MoveAngular,verticalAttraction,,verticalError={1},unscaled={2},preEff={3},eff={4},effSq={5},vertAttr={6}", - Prim.LocalID, verticalError, unscaledContrib, preEfficiencyContrib, - m_verticalAttractionEfficiency, efficencySquared, - verticalAttractionContribution); - */ - - } - - // ================================================================== - Vector3 deflectionContribution = Vector3.Zero; - if (m_angularDeflectionEfficiency != 0) - { - // Compute a scaled vector that points in the preferred axis (X direction) - Vector3 scaledDefaultDirection = - new Vector3((pTimestep * 10 * (m_angularDeflectionEfficiency / m_angularDeflectionTimescale)), 0, 0); - // Adding the current vehicle orientation and reference frame displaces the orientation to the frame. - // Rotate the scaled default axix relative to the actual vehicle direction giving where it should point. - Vector3 preferredAxisOfMotion = scaledDefaultDirection * Quaternion.Add(Prim.ForceOrientation, m_referenceFrame); - - // Scale by efficiency and timescale - deflectionContribution = (preferredAxisOfMotion * (m_angularDeflectionEfficiency) / m_angularDeflectionTimescale) * pTimestep; - - VDetailLog("{0},MoveAngular,Deflection,perfAxis={1},deflection={2}", - Prim.LocalID, preferredAxisOfMotion, deflectionContribution); - // This deflection computation is not correct. - deflectionContribution = Vector3.Zero; - } - - // ================================================================== - Vector3 bankingContribution = Vector3.Zero; - if (m_bankingEfficiency != 0) - { - Vector3 dir = Vector3.One * Prim.ForceOrientation; - float mult = (m_bankingMix*m_bankingMix)*-1*(m_bankingMix < 0 ? -1 : 1); - //Changes which way it banks in and out of turns - - //Use the square of the efficiency, as it looks much more how SL banking works - float effSquared = (m_bankingEfficiency*m_bankingEfficiency); - if (m_bankingEfficiency < 0) - effSquared *= -1; //Keep the negative! - - float mix = Math.Abs(m_bankingMix); - if (m_angularMotorVelocity.X == 0) - { - // The vehicle is stopped - /*if (!parent.Orientation.ApproxEquals(this.m_referenceFrame, 0.25f)) - { - Vector3 axisAngle; - float angle; - parent.Orientation.GetAxisAngle(out axisAngle, out angle); - Vector3 rotatedVel = parent.Velocity * parent.Orientation; - if ((rotatedVel.X < 0 && axisAngle.Y > 0) || (rotatedVel.X > 0 && axisAngle.Y < 0)) - m_angularMotorVelocity.X += (effSquared * (mult * mix)) * (1f) * 10; - else - m_angularMotorVelocity.X += (effSquared * (mult * mix)) * (-1f) * 10; - }*/ - } - else - { - bankingContribution.Z += (effSquared * (mult * mix)) * (m_angularMotorVelocity.X) * 4; - } - - //If they are colliding, we probably shouldn't shove the prim around... probably - if (!Prim.IsColliding && Math.Abs(m_angularMotorVelocity.X) > mix) - { - float angVelZ = m_angularMotorVelocity.X*-1; - /*if(angVelZ > mix) - angVelZ = mix; - else if(angVelZ < -mix) - angVelZ = -mix;*/ - //This controls how fast and how far the banking occurs - Vector3 bankingRot = new Vector3(angVelZ*(effSquared*mult), 0, 0); - if (bankingRot.X > 3) - bankingRot.X = 3; - else if (bankingRot.X < -3) - bankingRot.X = -3; - bankingRot *= Prim.ForceOrientation; - bankingContribution += bankingRot; - } - m_angularMotorVelocity.X *= m_bankingEfficiency == 1 ? 0.0f : 1 - m_bankingEfficiency; - VDetailLog("{0},MoveAngular,Banking,bEff={1},angMotVel={2},effSq={3},mult={4},mix={5},banking={6}", - Prim.LocalID, m_bankingEfficiency, m_angularMotorVelocity, effSquared, mult, mix, bankingContribution); - } + Vector3 bankingContribution = ComputeAngularBanking(pTimestep); // ================================================================== m_lastVertAttractor = verticalAttractionContribution; // Sum velocities - m_lastAngularVelocity = angularMotorContribution + m_lastAngularVelocity = angularMotorContribution + verticalAttractionContribution + bankingContribution + deflectionContribution; @@ -1032,7 +910,7 @@ namespace OpenSim.Region.Physics.BulletSPlugin // Since we are stuffing the angular velocity directly into the object, the computed // velocity needs to be scaled by the timestep. // Also remove any motion that is on the object so added motion is only from vehicle. - Vector3 applyAngularForce = ((m_lastAngularVelocity * pTimestep) + Vector3 applyAngularForce = ((m_lastAngularVelocity * pTimestep) - Prim.ForceRotationalVelocity); // Unscale the force by the angular factor so it overwhelmes the Bullet additions. Prim.ForceRotationalVelocity = applyAngularForce; @@ -1046,6 +924,147 @@ namespace OpenSim.Region.Physics.BulletSPlugin } } + public Vector3 ComputeAngularVerticalAttraction(float pTimestep) + { + Vector3 ret = Vector3.Zero; + + // If vertical attaction timescale is reasonable and we applied an angular force last time... + if (m_verticalAttractionTimescale < 500) + { + Vector3 verticalError = Vector3.UnitZ * Prim.ForceOrientation; + verticalError.Normalize(); + m_verticalAttractionMotor.SetCurrent(verticalError); + m_verticalAttractionMotor.SetTarget(Vector3.UnitZ); + ret = m_verticalAttractionMotor.Step(pTimestep); + /* + // Take a vector pointing up and convert it from world to vehicle relative coords. + Vector3 verticalError = Vector3.UnitZ * Prim.ForceOrientation; + verticalError.Normalize(); + + // If vertical attraction correction is needed, the vector that was pointing up (UnitZ) + // is now leaning to one side (rotated around the X axis) and the Y value will + // go from zero (nearly straight up) to one (completely to the side) or leaning + // front-to-back (rotated around the Y axis) and the value of X will be between + // zero and one. + // The value of Z is how far the rotation is off with 1 meaning none and 0 being 90 degrees. + + // If verticalError.Z is negative, the vehicle is upside down. Add additional push. + if (verticalError.Z < 0f) + { + verticalError.X = 2f - verticalError.X; + verticalError.Y = 2f - verticalError.Y; + } + + // Y error means needed rotation around X axis and visa versa. + verticalAttractionContribution.X = verticalError.Y; + verticalAttractionContribution.Y = - verticalError.X; + verticalAttractionContribution.Z = 0f; + + // scale by the time scale and timestep + Vector3 unscaledContrib = verticalAttractionContribution; + verticalAttractionContribution /= m_verticalAttractionTimescale; + verticalAttractionContribution *= pTimestep; + + // apply efficiency + Vector3 preEfficiencyContrib = verticalAttractionContribution; + float efficencySquared = m_verticalAttractionEfficiency * m_verticalAttractionEfficiency; + verticalAttractionContribution *= (m_verticalAttractionEfficiency * m_verticalAttractionEfficiency); + + VDetailLog("{0},MoveAngular,verticalAttraction,,verticalError={1},unscaled={2},preEff={3},eff={4},effSq={5},vertAttr={6}", + Prim.LocalID, verticalError, unscaledContrib, preEfficiencyContrib, + m_verticalAttractionEfficiency, efficencySquared, + verticalAttractionContribution); + */ + + } + return ret; + } + + public Vector3 ComputeAngularDeflection(float pTimestep) + { + Vector3 ret = Vector3.Zero; + + if (m_angularDeflectionEfficiency != 0) + { + // Compute a scaled vector that points in the preferred axis (X direction) + Vector3 scaledDefaultDirection = + new Vector3((pTimestep * 10 * (m_angularDeflectionEfficiency / m_angularDeflectionTimescale)), 0, 0); + // Adding the current vehicle orientation and reference frame displaces the orientation to the frame. + // Rotate the scaled default axix relative to the actual vehicle direction giving where it should point. + Vector3 preferredAxisOfMotion = scaledDefaultDirection * Quaternion.Add(Prim.ForceOrientation, m_referenceFrame); + + // Scale by efficiency and timescale + ret = (preferredAxisOfMotion * (m_angularDeflectionEfficiency) / m_angularDeflectionTimescale) * pTimestep; + + VDetailLog("{0},MoveAngular,Deflection,perfAxis={1},deflection={2}", Prim.LocalID, preferredAxisOfMotion, ret); + + // This deflection computation is not correct. + ret = Vector3.Zero; + } + return ret; + } + + public Vector3 ComputeAngularBanking(float pTimestep) + { + Vector3 ret = Vector3.Zero; + + if (m_bankingEfficiency != 0) + { + Vector3 dir = Vector3.One * Prim.ForceOrientation; + float mult = (m_bankingMix * m_bankingMix) * -1 * (m_bankingMix < 0 ? -1 : 1); + //Changes which way it banks in and out of turns + + //Use the square of the efficiency, as it looks much more how SL banking works + float effSquared = (m_bankingEfficiency * m_bankingEfficiency); + if (m_bankingEfficiency < 0) + effSquared *= -1; //Keep the negative! + + float mix = Math.Abs(m_bankingMix); + if (m_angularMotorVelocity.X == 0) + { + // The vehicle is stopped + /*if (!parent.Orientation.ApproxEquals(this.m_referenceFrame, 0.25f)) + { + Vector3 axisAngle; + float angle; + parent.Orientation.GetAxisAngle(out axisAngle, out angle); + Vector3 rotatedVel = parent.Velocity * parent.Orientation; + if ((rotatedVel.X < 0 && axisAngle.Y > 0) || (rotatedVel.X > 0 && axisAngle.Y < 0)) + m_angularMotorVelocity.X += (effSquared * (mult * mix)) * (1f) * 10; + else + m_angularMotorVelocity.X += (effSquared * (mult * mix)) * (-1f) * 10; + }*/ + } + else + { + ret.Z += (effSquared * (mult * mix)) * (m_angularMotorVelocity.X) * 4; + } + + //If they are colliding, we probably shouldn't shove the prim around... probably + if (!Prim.IsColliding && Math.Abs(m_angularMotorVelocity.X) > mix) + { + float angVelZ = m_angularMotorVelocity.X * -1; + /*if(angVelZ > mix) + angVelZ = mix; + else if(angVelZ < -mix) + angVelZ = -mix;*/ + //This controls how fast and how far the banking occurs + Vector3 bankingRot = new Vector3(angVelZ * (effSquared * mult), 0, 0); + if (bankingRot.X > 3) + bankingRot.X = 3; + else if (bankingRot.X < -3) + bankingRot.X = -3; + bankingRot *= Prim.ForceOrientation; + ret += bankingRot; + } + m_angularMotorVelocity.X *= m_bankingEfficiency == 1 ? 0.0f : 1 - m_bankingEfficiency; + VDetailLog("{0},MoveAngular,Banking,bEff={1},angMotVel={2},effSq={3},mult={4},mix={5},banking={6}", + Prim.LocalID, m_bankingEfficiency, m_angularMotorVelocity, effSquared, mult, mix, ret); + } + return ret; + } + + // This is from previous instantiations of XXXDynamics.cs. // Applies roll reference frame. // TODO: is this the right way to separate the code to do this operation?