* Some methods were returning the value of the first plugin queried, even if the return was null
* Other methods are probably best off querying more than one plugin and aggregating results
* Make OGS1UserServices inherit from UserManagerBase
* This allows grid mode regions to use the same user data plugin infrastructure as grid servers and standalone OpenSims
* Introduced preprocess step in FetchAsset (Might revert this later)
* Some minor CCC
* Added actual implementation of GetUserProfile( uri ) and the corresponding handler to OGS1.
* Introduced non-functioning GetUserUri( userProfile) awaiting user server wireup (this might move elsewhere)
Added safemode config to Standalone Hypergrid, similar effect to AllowRegionAccessToInventory in Inventory Server. Everyone should have these vars set to their default values except me!
* Sometimes, null is a valid return value to indicate 'none found'. doh.
* Sometimes, the Grid server does not send simURI - this you need to reconstruct yourself. Euw.
(I believe) this solves mantis issue #3287
* In most cases, the setting in OpenSim.ini.example is taken as the canonical one since this is the file virtually everyone ends up using
* OpenSim will start up with a blank OpenSim.ini, in which case sqlite is the default database (as before)
* Finally got to the point where I could pull up the CustomiseResponse function. Major de-duplication.
* Introduced FromRegionInfo on RegionProfileData
* This revision needs both grid and standalone testing galore.
Work in progress!
* A saved archive now immediately expires the data in the asset cache that it used, rather than retaining all the assets (esp textures) in the cache.
* This is an imperfect solution. Ideally we would only expire the assets newly requested for the archive (not existing ones). But doing that would require a lot more
restructuring.
* I don't believe there are any locking issues due to the locking performed by the underlying memory cache, but please report any issues.
There were multiple tests in one test method (T011_Auth_Login). This
test has been refactored into multiple tests. Common setup code was
placed into a SetUp method executed before each test.
Recent changes in the code handling login_to_simulator XMLRPC method
calls caused two tests to fail because not enough parameters were being
supplied with the method call. The parameters added in this patch work,
but I'm not sure whether they are actually correct or even relevant.
Diva, please look over this.
Changed OpenSim.Framework.Communications.Tests.LoginServiceTests to use the LLStandaloneLoginService (from the LLStandaloneLoginModule) rather than LocalLoginService. Really these login tests should most likely be somewhere else as they are testing specific implementations of login services.
Commented out the old LocalLoginService as its no longer used, but want to check there are no problems before it gets deleted.
* Added log4net dependency to physxplugin in prebuild.xml.
* Added missing m_log fields to classes.
* Replaced Console.WriteLine with appropriate m_log.Xxxx
* Tested that nant test target runs succesfully.
* Tested that local opensim sandbox starts up without errors.
I've changed the extension point name, and the internal references that
used the same string. I also fixed up the messaging around the asset
loader so that it is more explicit.
The change makes two principal implementation changes:
[1] It removes the hard coded set of possible asset server client
implementations, allowing any arbitrary implementation that has been
identified to the PluginLoader as an appropriate extension. The
extension point for asset server client extension
is /OpenSim/AssetServerClient. All of the old configuration rules have
been preserved, and any of the legacy configuration values will still
work as they did before, except the implementation is now loaded as a
plug-in, rather than as a hard-coded instantiation of a specific class.
The re-hashing of IAssetServer as an extension of IPlugin made upgrading
of the implementation classes a necessity.
Caveat: I have not been able to meaningfully test the crypto-grid
clients. I believe they should work correctly, but the refactoring
necessary to handle plug-in based initialization (vs constructor-based
initialisation) admits the possibility of a problem.
[2] The asset cache implementation, previously introduce as a hard-code
class instantiation is now implemented as an IPlugin. Once again the
previous (configurationless) behavior has been preserved. But now it is
possible for those interested in experimenting with cache technologies
to do so simply by introducing a new extension for the asset cache
extension point (/OpenSim/AssetCache).
I've tested all of the configuration settings, after applying the patch
to a newly extracted tree, and they seem to work OK.
These changes replace all direct references to the AssetCache with
IAssetCache. There is no change to functionality. Everything works as
before.
This is laying the groundwork for making it possible to register
alternative asset caching mechanisms without disrupting other parts of
OpenSim or their dependencies upon AssetCache functionality.
OpenSim.Region.Environment into a "framework" part and a modules only
part. This first changeset refactors OpenSim.Region.Environment.Scenes,
OpenSim.Region.Environment.Interfaces, and OpenSim.Region.Interfaces
into OpenSim.Region.Framework.{Interfaces,Scenes} leaving only region
modules in OpenSim.Region.Environment.
The next step will be to move region modules up from
OpenSim.Region.Environment.Modules to OpenSim.Region.CoreModules and
then sort out which modules are really core modules and which should
move out to forge.
I've been very careful to NOT BREAK anything. i hope i've
succeeded. as this is the work of a whole week i hope i managed to
keep track with the applied patches of the last week --- could any of
you that did check in stuff have a look at whether it survived? thx!
* This option makes OpenSim use the usual db based asset service in standalone, and the grid based one in grid mode
* The other options can (local, grid, etc) can still be used explicitly as before
* Also change OpenSim.ini.example and the surrounding explanative text
* This allows configuration of the assetset and library control file paths to be other than ./inventory/Libraries.xml and ./assets/AssetSets.xml
* This is controlled via the LibrariesXMLFile and AssetSetsXMLFile configuration settings in [StandAlone] in OpenSim.ini (in standalone)
and via the user and asset config xml files for grid mode
* Thanks to SirKimba for the patch
* This facility allows you to save changes to an object that you've rezzed into a region back into their original inventory item without having to take a copy of the rezzed
object.
aggressive at nixing the user out of the cache. We're now relying on NeedSceneCacheClear to decide
whether to nix it or not. All other mods in other files are for better debugging messages.
* This means that UserProfileCacheService no longer needs to know about IClientAPI and can leave it to callers to do their own error logging
* This is also more consistent with the way that item inventory manipulation is handled
* I don't really think Scene.PacketHandlers.cs should be a permanent home for these handlers - this is just for convenience
* This means that LL RAW terrains (one source being the upload/download buttons on the estate dialog in the viewer) are now imported the 'right' way around rather than being
flipped on the y axis
* Existing RAW terrains before this patch will need to be flipped with the "terrain flip y" command from the console after import
* More details on the mailing lists soon.
-This line, and those below, will be ignored--
M OpenSim/Region/Environment/Modules/World/Terrain/FileLoaders/LLRAW.cs
M OpenSim/Framework/Communications/Cache/CachedUserInfo.cs
M OpenSim/Framework/Communications/Cache/UserProfileCacheService.cs
* However, this is not currently activated since it's not absolutely fully tested and there's a bug lurking in there to do with the sending of the BulkInventoryUpdate packets
* This is Diva's hypergrid patch, as perviously discussed on the opensim-dev mailing list
* Applied some minor prebuild.xml jiggling to resolve a dependency issue
* Thanks Diva!
from the presence module to the message server, through the user server
and on into the database. This should fix the "Already logged in" issue
that grids see after a sim crashes, or a user crashes out of a sim.
Not yet a 100% solution for friends, but getting there.
This patch adds the option of adding the email when you create
a new user. This works in Gridmode as none Gridmode. This
option is also added to RemoteAdminPlugin. With a new handler
you can create a user with a email.
release a direct descendant of the stable 7364, with all the features and
none of the issues.
This omits the following patch chain: r7383 r7382 r7381 r7377 r7375 r7373
r7372 r7370 r7369 r7368 r7367 r7366
* Code Cleanliness Fixes in LLClientView
* Using field instead of local variable for handlerUpdatePrimGroupRotation (if you notice any new oddities with prim group rotation after this patch, please mantis)
* Items will now be locally cached for only 24 hours from last access. (Rather than until restart)
* Caveat: Implementing the new caching mechanism means statistics gathering on AssetCache is no longer functional. (Justin - you might want to take a look and see if you can somehow get that back and running if you still need it)
This patch introduces a couple of read-only properties,
so that I can grab the asset server plugin from a region
module. This is needed to set up an http service for
accessing standalone assets remotely.
on-/offline updates, calling cards for friends.
This adds methods in the DB layer and changes the MessagingServer, so a full
update (incl. UGAIM) is necessary to get it working. Older regions shouldn't
break, nor should older UGAIM break newer regions, but friends/presence will
only work with all concerned parts (UGAIM, source region and destination
region) at this revision (or later).
I added the DB code for MSSQL, too, but couldn't test that.
BEWARE: May contain bugs.
* Whilst this does automatically get the client to rebake, on crossing a region border the 'local' assets are left behind
* There may be a cunning solution (such as squirting the assets on region crossing, or having them fetched from the original region) but
instead I'm going to opt for the easy solution of keeping them in the asset database, for now
Justin Clarke Casey