45b588cf00
Revert "Simple build permissions feature. NOTE: EXPERIMENTAL, DISABLED BY DEFAULT. Turns out that this can't be expressed by cascading Permission modules, so I did it as per this patch."
...
This reverts commit 6146e7ef25
2012-03-22 20:10:38 +00:00
6146e7ef25
Simple build permissions feature. NOTE: EXPERIMENTAL, DISABLED BY DEFAULT. Turns out that this can't be expressed by cascading Permission modules, so I did it as per this patch.
2012-03-22 12:57:12 -07:00
a2009ffe2e
Terrain: added [Terrain] section with an option to load an initial flat terrain. Default is still pinhead island. I much rather have a flat land in the beginning.
2012-03-16 13:08:05 -07:00
1547fe959e
Change OpenSim.ini.example to reflect how to actually enable prim limits,
...
as opposed to how it was first designed.
2012-03-12 16:06:35 +00:00
d6ebf2d6ca
Add ability to specify a default estate to be used when creating regions.
...
This is configured in the new [Estates] section of OpenSim.ini.
If a default estate is configured then all new regions are automatically joined to it instead of asking the user.
If the default estate does not already exist then it is created.
Current default behaviour remains the same - the user is asked for estate details when necessary.
Thanks to Frenando Oliveira for the patch which I adapated further.
2012-03-10 01:27:05 +00:00
33e66107be
Fix: Lightshare Module(Windlight)-Region settings are not applicable for database sqlite mantis: http://opensimulator.org/mantis/view.php?id=5888
2012-02-14 02:06:42 +00:00
48b962c401
Update [XEngine] AppDomainLoading advice in OpenSim.ini.example
2012-02-14 00:00:49 +00:00
44badf452e
change NonPhysicalPrimMax to NonphysicalPrimMax to make this variable
...
work correctly, it was being ignored because of the case, this effects
OpenSim.ini.example and OpenSimDefaults.ini
2012-02-04 19:41:25 -07:00
34137ed4ea
Correcting ini.example were permissionmodules uses komma instead of space as separator
2012-01-12 12:27:41 -05:00
a2fe3e2081
Remove DEBUG option
...
Remove DEBUG option from OpenSim.ini.example as it is handled in the console now with "debug teleport"
2012-01-10 15:29:08 -05:00
707c8c6f2b
Add some run-time debugging support
...
Add configuration option - DEBUG to enable debugging methods. This is temporary for helping users testing teleport routing be able to report back the data with the test cases. We can remove when finished with this, or leave it if it proves to be useful.
Users: set DEBUG = true in OpenSim.ini to get more information from teleport routing. The default is false. It presently prints the TeleportFlags value.
2012-01-09 18:19:55 -05:00
a94ce3f1df
Move DeleteScriptsOnStartup switch from [Startup] to [XEngine] in OpenSim.ini.example.
...
If anybody was changing this and wondering why there was no effect, this is why.
2011-11-21 15:30:00 +00:00
169387b390
Turn SellEnabled in the [EconomyModule] on by default.
...
This only provides enough functionality to allow operations for no money (e.g. sell for $0).
2011-11-17 23:53:25 +00:00
2d4ac6288d
Alter commit 3758306 to allow region name to be substituted within a region console prompt
...
This is to allow broader subsitution in the future. Currently, the only substitions are \R (for region name) and \\ (for a single backslash)
e.g. "Region (\R) " is the current and continuing default prompt
This renames custom_prompt in [Startup] to ConsolePrompt
2011-11-10 22:56:13 +00:00
37583063ee
Allow custom setting for the console prompt
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-11-10 06:56:32 -05:00
59232a6ea8
Change default say distance to 20m from 30m, the same as on the big grid. This is to improve the migration of scripts that expect a 20m say distance.
...
If you want to keep a 30m say distance then please set this as the say_distance parameter in the [Chat] section of OpenSim.ini.
2011-11-02 20:05:31 +00:00
41395d5443
Added optional owner classes to existing OSSL agent Permissions
...
PARCEL_GROUP, PARCEL_OWNER, ESTATE_MANAGER and REGION_OWNER can be combined with the existing agent uuid option to limit ossl functions to agents and owner classes.
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-10-26 10:35:50 -04:00
5551542c28
Improve explanation of access_ip_addresses in [RemoteAdmin] to say that there are no restrictions if not set
2011-10-08 01:39:27 +01:00
4073cd6ced
Add option to allow only explicitly listed IPs to access RemoteAdmin facilities.
...
Also adds password check to some functions where this was missing and fixes some parameter checking.
This is a patch from http://opensimulator.org/mantis/view.php?id=5715 with a few small unrelated spacing tweaks from me.
Thanks Michelle Argus.
2011-10-08 01:23:26 +01:00
5bc6503ae1
Correct DeleteScriptsOnRestart to DeleteScriptsOnStartup in comments in OpenSim.ini.example
2011-10-07 21:43:52 +01:00
f1986d54bb
Clarify explanation of DeleteScriptsOnStartup switch in [XEngine].
2011-10-04 22:48:28 +01:00
844b4f3a16
copy config information on allow/disallow individual os functions into OpenSim.ini.example
...
I this is generally useful rather than a 'default' setting
2011-09-30 23:55:02 +01:00
39d7945efc
Added a setting to [Startup] section of config that will allow the simulator to start up with no regions configured.
...
I added the boolean config setting "allow_regionless", defaulting to false. If set to true, opensim will start up ok if no region configurations are found in the specified region_info_source. It will not ask the user to create a region.
2011-09-24 01:59:02 +01:00
5364607005
Clarify explanation of the "DeleteScriptsOnStartup" config switch and add this to OpenSim.ini.example since it's very useful if you're not updating OpenSim from source.
...
On reflection, "DeleteScriptsOnStartup" isn't a great name since it suggests real script deletion rather than compiled versions.
2011-09-24 00:22:23 +01:00
27af016381
Add BulletSim physics option details to OpenSim.ini.example. Marked as in development and experimental.
2011-09-17 01:13:07 +01:00
f950338124
Remove old bullet DotNET and X libraries in preparation for BulletS
...
These weren't working properly anyway.
You will need to rerun prebuild.sh/.bat after this commit, and maybe "nant clean" as well.
2011-09-17 01:09:25 +01:00
744602f6d1
Revert "uncomment Standalone config in OpenSim.ini.example."
...
This reverts commit 44a491f36b
2011-09-17 00:10:19 +01:00
44a491f36b
uncomment Standalone config in OpenSim.ini.example.
...
This is to make my life easier when creating releases.
I think that it also gives a better story for anybody newly compiling from source.
2011-09-12 20:31:14 +01:00
eb431f91c0
Add terminating quotes to http addresses in [SimulatorFeatures] section of OpenSim.ini.example.
...
As per http://opensimulator.org/mantis/view.php?id=5638 . Thanks DutchGlory.
2011-08-16 21:50:15 +01:00
e29e50798a
minor: Add warning to OpenSim.ini.example about bullet plugins not working right now, pending the new plugin
2011-08-16 21:31:48 +01:00
c1c0d780ee
correct config comments mistakes
2011-08-03 04:36:25 +01:00
797def8aa4
Put config to enable disable [NPC] module.
...
Default is disabled. You will need to explicitly enable to toy with this.
2011-08-03 04:33:45 +01:00
835352aee9
Make it clearer what the save_crashes setting in [Startup] actually does.
2011-07-30 01:05:30 +01:00
ea58aee338
Change default AllowScriptCrossings config setting to true.
...
When this setting is false and other defaults haven't been changed, scripts entering the simulator from another sim are automatically restarted but their state is not preserved.
When this setting is true, state that accompanies the script is reloaded (e.g. if a script had a variable i = 1 when leaving the source region, it will still have i = 1 on the destination region).
This setting does not affect crossings when regions are run in the same simulator. In this case, state is already preserved.
2011-07-23 02:31:00 +01:00
e1ce106790
make [SMTP] default comment option match actual default
2011-07-21 03:21:19 +01:00
0a09c45726
minor: group all the map tile options together
2011-07-21 03:18:10 +01:00
69c2d3434a
minor: remove the pointless quotes from the GenerateMaptiles option
2011-07-21 03:13:54 +01:00
1c758ae01c
make default TextureOnMapTile true for the older map imager
...
Don't know of a good reason not to do this, seems to work fine.
2011-07-21 03:08:58 +01:00
fba961c63f
Make default serverside_object_permissions = true since this better matches user expectations.
...
It also matches the default setting in the OpenSim.ini.example file
2011-07-01 23:06:46 +01:00
a9b7487fcb
improve and tidy up some config file comments
2011-06-30 22:36:41 +01:00
03feb50a72
minor: adjust some indentation and spacing in OpenSim.ini.example for consistency
2011-06-30 20:26:17 +01:00
e11c959400
[PATCH] Changed Wind parameters default value in OpenSim.ini.example
...
according to implementation
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-06-28 11:48:28 -04:00
822b9e085f
Added SimulatorFeatures capability. Thanks Aurora devs for the bootstrap on the contents of the response.
...
Changed the experimental capability introduced a couple of commits ago: now sending that extra information as part of the response in the SimulatorFeatures cap.
2011-06-13 10:21:29 -07:00
0e4db3ca39
Added experimental new capability URL called MapImageService meant to work with Kokua viewer if devs are willing to do it.
2011-06-13 07:56:52 -07:00
dfa4442319
Move the "!!!Standalone Only!!!" [FreeswitchService] section from OpenSim.ini.example to config/StandaloneCommon.ini.example where it belongs.
2011-06-02 22:43:44 +01:00
b000d4f67f
minor: add ini.example doc to hint that the server address in [FreeswitchService] must be reachable by viewers
2011-06-02 21:37:17 +01:00
279ed08de1
Incremental patch to add config options to enable/disable the prim limits module to OpenSim.ini. EnforcePrimLimits is set to false by default to emulate the current behavior.
2011-05-09 03:14:48 +01:00
98b84802e4
Changed the defaults, so that it behaves exactly is it has been behaving (no WebFetch cap by default).
2011-05-02 20:19:36 -07:00
1b43c05c3d
Change default ini.example port used by Freeswitch in grid settings to 8004.
...
This is to facilitate running Freeswitch in a separate ROBUST shell, as on grid setups there can be quite a lot of traffic flowing between FreeSWITCH and ROBUST. However, running in a spearate shell is not mandatory.
2011-04-27 02:05:16 +01:00
2fa210243b
Clean up freeswitch config to what is currently required. Add explanation to config parameters. Clean up some log messages.
2011-04-19 21:54:26 +01:00
Melanie