The numbers here are old enough to be nearly meaningless. Until it is updated, use this document only as proof that SQLite is not a sluggard.
A series of tests were run to measure the relative performance of SQLite 2.7.6, PostgreSQL 7.1.3, and MySQL 3.23.41. The following are general conclusions drawn from these experiments:
SQLite 2.7.6 is significantly faster (sometimes as much as 10 or 20 times faster) than the default PostgreSQL 7.1.3 installation on RedHat 7.2 for most common operations.
SQLite 2.7.6 is often faster (sometimes more than twice as fast) than MySQL 3.23.41 for most common operations.
SQLite does not execute CREATE INDEX or DROP TABLE as fast as the other databases. But this is not seen as a problem because those are infrequent operations.
SQLite works best if you group multiple operations together into a single transaction.
The results presented here come with the following caveats:
These tests did not attempt to measure multi-user performance or optimization of complex queries involving multiple joins and subqueries.
These tests are on a relatively small (approximately 14 megabyte) database. They do not measure how well the database engines scale to larger problems.
The platform used for these tests is a 1.6GHz Athlon with 1GB or memory and an IDE disk drive. The operating system is RedHat Linux 7.2 with a stock kernel.
The PostgreSQL and MySQL servers used were as delivered by default on RedHat 7.2. (PostgreSQL version 7.1.3 and MySQL version 3.23.41.) No effort was made to tune these engines. Note in particular the the default MySQL configuration on RedHat 7.2 does not support transactions. Not having to support transactions gives MySQL a big speed advantage, but SQLite is still able to hold its own on most tests.
I am told that the default PostgreSQL configuration in RedHat 7.3 is unnecessarily conservative (it is designed to work on a machine with 8MB of RAM) and that PostgreSQL could be made to run a lot faster with some knowledgeable configuration tuning. Matt Sergeant reports that he has tuned his PostgreSQL installation and rerun the tests shown below. His results show that PostgreSQL and MySQL run at about the same speed. For Matt's results, visit
http://www.sergeant.org/sqlite_vs_pgsync.html
SQLite was tested in the same configuration that it appears on the website. It was compiled with -O6 optimization and with the -DNDEBUG=1 switch which disables the many "assert()" statements in the SQLite code. The -DNDEBUG=1 compiler option roughly doubles the speed of SQLite.
All tests are conducted on an otherwise quiescent machine. A simple Tcl script was used to generate and run all the tests. A copy of this Tcl script can be found in the SQLite source tree in the file tools/speedtest.tcl.
The times reported on all tests represent wall-clock time in seconds. Two separate time values are reported for SQLite. The first value is for SQLite in its default configuration with full disk synchronization turned on. With synchronization turned on, SQLite executes an fsync() system call (or the equivalent) at key points to make certain that critical data has actually been written to the disk drive surface. Synchronization is necessary to guarantee the integrity of the database if the operating system crashes or the computer powers down unexpectedly in the middle of a database update. The second time reported for SQLite is when synchronization is turned off. With synchronization off, SQLite is sometimes much faster, but there is a risk that an operating system crash or an unexpected power failure could damage the database. Generally speaking, the synchronous SQLite times are for comparison against PostgreSQL (which is also synchronous) and the asynchronous SQLite times are for comparison against the asynchronous MySQL engine.
CREATE TABLE t1(a INTEGER, b INTEGER, c VARCHAR(100));
INSERT INTO t1 VALUES(1,13153,'thirteen thousand one hundred fifty three');
INSERT INTO t1 VALUES(2,75560,'seventy five thousand five hundred sixty');
... 995 lines omitted
INSERT INTO t1 VALUES(998,66289,'sixty six thousand two hundred eighty nine');
INSERT INTO t1 VALUES(999,24322,'twenty four thousand three hundred twenty two');
INSERT INTO t1 VALUES(1000,94142,'ninety four thousand one hundred forty two');
| PostgreSQL: | 4.373 |
| MySQL: | 0.114 |
| SQLite 2.7.6: | 13.061 |
| SQLite 2.7.6 (nosync): | 0.223 |
Because it does not have a central server to coordinate access, SQLite must close and reopen the database file, and thus invalidate its cache, for each transaction. In this test, each SQL statement is a separate transaction so the database file must be opened and closed and the cache must be flushed 1000 times. In spite of this, the asynchronous version of SQLite is still nearly as fast as MySQL. Notice how much slower the synchronous version is, however. SQLite calls fsync() after each synchronous transaction to make sure that all data is safely on the disk surface before continuing. For most of the 13 seconds in the synchronous test, SQLite was sitting idle waiting on disk I/O to complete.
BEGIN;
CREATE TABLE t2(a INTEGER, b INTEGER, c VARCHAR(100));
INSERT INTO t2 VALUES(1,59672,'fifty nine thousand six hundred seventy two');
... 24997 lines omitted
INSERT INTO t2 VALUES(24999,89569,'eighty nine thousand five hundred sixty nine');
INSERT INTO t2 VALUES(25000,94666,'ninety four thousand six hundred sixty six');
COMMIT;
| PostgreSQL: | 4.900 |
| MySQL: | 2.184 |
| SQLite 2.7.6: | 0.914 |
| SQLite 2.7.6 (nosync): | 0.757 |
When all the INSERTs are put in a transaction, SQLite no longer has to close and reopen the database or invalidate its cache between each statement. It also does not have to do any fsync()s until the very end. When unshackled in this way, SQLite is much faster than either PostgreSQL and MySQL.
BEGIN;
CREATE TABLE t3(a INTEGER, b INTEGER, c VARCHAR(100));
CREATE INDEX i3 ON t3(c);
... 24998 lines omitted
INSERT INTO t3 VALUES(24999,88509,'eighty eight thousand five hundred nine');
INSERT INTO t3 VALUES(25000,84791,'eighty four thousand seven hundred ninety one');
COMMIT;
| PostgreSQL: | 8.175 |
| MySQL: | 3.197 |
| SQLite 2.7.6: | 1.555 |
| SQLite 2.7.6 (nosync): | 1.402 |
There were reports that SQLite did not perform as well on an indexed table. This test was recently added to disprove those rumors. It is true that SQLite is not as fast at creating new index entries as the other engines (see Test 6 below) but its overall speed is still better.
BEGIN;
SELECT count(*), avg(b) FROM t2 WHERE b>=0 AND b<1000;
SELECT count(*), avg(b) FROM t2 WHERE b>=100 AND b<1100;
... 96 lines omitted
SELECT count(*), avg(b) FROM t2 WHERE b>=9800 AND b<10800;
SELECT count(*), avg(b) FROM t2 WHERE b>=9900 AND b<10900;
COMMIT;
| PostgreSQL: | 3.629 |
| MySQL: | 2.760 |
| SQLite 2.7.6: | 2.494 |
| SQLite 2.7.6 (nosync): | 2.526 |
This test does 100 queries on a 25000 entry table without an index, thus requiring a full table scan. Prior versions of SQLite used to be slower than PostgreSQL and MySQL on this test, but recent performance enhancements have increased its speed so that it is now the fastest of the group.
BEGIN;
SELECT count(*), avg(b) FROM t2 WHERE c LIKE '%one%';
SELECT count(*), avg(b) FROM t2 WHERE c LIKE '%two%';
... 96 lines omitted
SELECT count(*), avg(b) FROM t2 WHERE c LIKE '%ninety nine%';
SELECT count(*), avg(b) FROM t2 WHERE c LIKE '%one hundred%';
COMMIT;
| PostgreSQL: | 13.409 |
| MySQL: | 4.640 |
| SQLite 2.7.6: | 3.362 |
| SQLite 2.7.6 (nosync): | 3.372 |
This test still does 100 full table scans but it uses uses string comparisons instead of numerical comparisons. SQLite is over three times faster than PostgreSQL here and about 30% faster than MySQL.
CREATE INDEX i2a ON t2(a);
CREATE INDEX i2b ON t2(b);
| PostgreSQL: | 0.381 |
| MySQL: | 0.318 |
| SQLite 2.7.6: | 0.777 |
| SQLite 2.7.6 (nosync): | 0.659 |
SQLite is slower at creating new indices. This is not a huge problem (since new indices are not created very often) but it is something that is being worked on. Hopefully, future versions of SQLite will do better here.
SELECT count(*), avg(b) FROM t2 WHERE b>=0 AND b<100;
SELECT count(*), avg(b) FROM t2 WHERE b>=100 AND b<200;
SELECT count(*), avg(b) FROM t2 WHERE b>=200 AND b<300;
... 4994 lines omitted
SELECT count(*), avg(b) FROM t2 WHERE b>=499700 AND b<499800;
SELECT count(*), avg(b) FROM t2 WHERE b>=499800 AND b<499900;
SELECT count(*), avg(b) FROM t2 WHERE b>=499900 AND b<500000;
| PostgreSQL: | 4.614 |
| MySQL: | 1.270 |
| SQLite 2.7.6: | 1.121 |
| SQLite 2.7.6 (nosync): | 1.162 |
All three database engines run faster when they have indices to work with. But SQLite is still the fastest.
BEGIN;
UPDATE t1 SET b=b*2 WHERE a>=0 AND a<10;
UPDATE t1 SET b=b*2 WHERE a>=10 AND a<20;
... 996 lines omitted
UPDATE t1 SET b=b*2 WHERE a>=9980 AND a<9990;
UPDATE t1 SET b=b*2 WHERE a>=9990 AND a<10000;
COMMIT;
| PostgreSQL: | 1.739 |
| MySQL: | 8.410 |
| SQLite 2.7.6: | 0.637 |
| SQLite 2.7.6 (nosync): | 0.638 |
For this particular UPDATE test, MySQL is consistently five or ten times slower than PostgreSQL and SQLite. I do not know why. MySQL is normally a very fast engine. Perhaps this problem has been addressed in later versions of MySQL.
BEGIN;
UPDATE t2 SET b=468026 WHERE a=1;
UPDATE t2 SET b=121928 WHERE a=2;
... 24996 lines omitted
UPDATE t2 SET b=35065 WHERE a=24999;
UPDATE t2 SET b=347393 WHERE a=25000;
COMMIT;
| PostgreSQL: | 18.797 |
| MySQL: | 8.134 |
| SQLite 2.7.6: | 3.520 |
| SQLite 2.7.6 (nosync): | 3.104 |
As recently as version 2.7.0, SQLite ran at about the same speed as MySQL on this test. But recent optimizations to SQLite have more than doubled speed of UPDATEs.
BEGIN;
UPDATE t2 SET c='one hundred forty eight thousand three hundred eighty two' WHERE a=1;
UPDATE t2 SET c='three hundred sixty six thousand five hundred two' WHERE a=2;
... 24996 lines omitted
UPDATE t2 SET c='three hundred eighty three thousand ninety nine' WHERE a=24999;
UPDATE t2 SET c='two hundred fifty six thousand eight hundred thirty' WHERE a=25000;
COMMIT;
| PostgreSQL: | 48.133 |
| MySQL: | 6.982 |
| SQLite 2.7.6: | 2.408 |
| SQLite 2.7.6 (nosync): | 1.725 |
Here again, version 2.7.0 of SQLite used to run at about the same speed as MySQL. But now version 2.7.6 is over two times faster than MySQL and over twenty times faster than PostgreSQL.
In fairness to PostgreSQL, it started thrashing on this test. A knowledgeable administrator might be able to get PostgreSQL to run a lot faster here by tweaking and tuning the server a little.
BEGIN;
INSERT INTO t1 SELECT b,a,c FROM t2;
INSERT INTO t2 SELECT b,a,c FROM t1;
COMMIT;
| PostgreSQL: | 61.364 |
| MySQL: | 1.537 |
| SQLite 2.7.6: | 2.787 |
| SQLite 2.7.6 (nosync): | 1.599 |
The asynchronous SQLite is just a shade slower than MySQL on this test. (MySQL seems to be especially adept at INSERT...SELECT statements.) The PostgreSQL engine is still thrashing - most of the 61 seconds it used were spent waiting on disk I/O.
DELETE FROM t2 WHERE c LIKE '%fifty%';
| PostgreSQL: | 1.509 |
| MySQL: | 0.975 |
| SQLite 2.7.6: | 4.004 |
| SQLite 2.7.6 (nosync): | 0.560 |
The synchronous version of SQLite is the slowest of the group in this test, but the asynchronous version is the fastest. The difference is the extra time needed to execute fsync().
DELETE FROM t2 WHERE a>10 AND a<20000;
| PostgreSQL: | 1.316 |
| MySQL: | 2.262 |
| SQLite 2.7.6: | 2.068 |
| SQLite 2.7.6 (nosync): | 0.752 |
This test is significant because it is one of the few where PostgreSQL is faster than MySQL. The asynchronous SQLite is, however, faster then both the other two.
INSERT INTO t2 SELECT * FROM t1;
| PostgreSQL: | 13.168 |
| MySQL: | 1.815 |
| SQLite 2.7.6: | 3.210 |
| SQLite 2.7.6 (nosync): | 1.485 |
Some older versions of SQLite (prior to version 2.4.0) would show decreasing performance after a sequence of DELETEs followed by new INSERTs. As this test shows, the problem has now been resolved.
BEGIN;
DELETE FROM t1;
INSERT INTO t1 VALUES(1,10719,'ten thousand seven hundred nineteen');
... 11997 lines omitted
INSERT INTO t1 VALUES(11999,72836,'seventy two thousand eight hundred thirty six');
INSERT INTO t1 VALUES(12000,64231,'sixty four thousand two hundred thirty one');
COMMIT;
| PostgreSQL: | 4.556 |
| MySQL: | 1.704 |
| SQLite 2.7.6: | 0.618 |
| SQLite 2.7.6 (nosync): | 0.406 |
SQLite is very good at doing INSERTs within a transaction, which probably explains why it is so much faster than the other databases at this test.
DROP TABLE t1;
DROP TABLE t2;
DROP TABLE t3;
| PostgreSQL: | 0.135 |
| MySQL: | 0.015 |
| SQLite 2.7.6: | 0.939 |
| SQLite 2.7.6 (nosync): | 0.254 |
SQLite is slower than the other databases when it comes to dropping tables. This probably is because when SQLite drops a table, it has to go through and erase the records in the database file that deal with that table. MySQL and PostgreSQL, on the other hand, use separate files to represent each table so they can drop a table simply by deleting a file, which is much faster.
On the other hand, dropping tables is not a very common operation so if SQLite takes a little longer, that is not seen as a big problem.
} footer $rcsid