OpenSimMirror/bin/OpenSim.ini.example

779 lines
34 KiB
Plaintext

;; This is the main configuration file for OpenSimulator. If it's named OpenSim.ini
;; then it will be loaded by OpenSimulator. If it's named OpenSim.ini.example then
;; you will need to copy it to OpenSim.ini first (if that file does not already exist)
;;
;; If you are copying, then once you have copied OpenSim.ini.example to OpenSim.ini you will
;; need to pick an architecture in the [Architecture] section at the end of this file.
;;
;; The settings in this file are in the form "<key> = <value>". For example, save_crashes = false
;; in the [Startup] section below.
;;
;; All settings are initially commented out and the default value used, as found in
;; OpenSimDefaults.ini. To change a setting, first uncomment it by deleting the initial semicolon (;)
;; and then change the value. This will override the value in OpenSimDefaults.ini
;;
;; If you want to find out what configuration OpenSimulator has finished with once all the configuration
;; files are loaded then type "config show" on the region console command line.
;;
;;
;; NOTES FOR DEVELOPERS REGARDING THE FORMAT OF THIS FILE
;;
;; All leading white space is ignored, but preserved.
;;
;; Double semicolons denote a text comment
;;
;; ;# denotes a configuration directive description
;; formatted as:
;; {option} {depends on} {question to ask} {choices} default value
;; Any text comments following the declaration, up to the next blank line.
;; will be copied to the generated file (NOTE: generation is not yet implemented)
;; A * in the choices list will allow an empty entry.
;; An empty question will set the default if the dependencies are
;; satisfied.
;;
;; ; denotes a commented out option.
;; Any options added to OpenSim.ini.example should be initially commented out.
[Startup]
;# {save_crashes} {} {Save crashes to disk?} {true false} false
;; Set this to true if you want to log crashes to disk
;; this can be useful when submitting bug reports.
;; However, this will only log crashes within OpenSimulator that cause the entire program to exit
;; It will not log crashes caused by virtual machine failures, which includes mono and ODE failures.
;; You will need to capture these native stack traces by recording the session log itself.
; save_crashes = false
;# {crash_dir} {save_crashes:true} {Directory to save crashes to?} {} crashes
;; Directory to save crashes to if above is enabled
;; (default is /opensimdir/crashes/*.txt or C:\opensim\crashes\*.txt)
; crash_dir = "crashes"
;# {PIDFile} {} {Path to PID file?} {}
;; Place to create a PID file
; PIDFile = "/tmp/my.pid"
;; Determine where OpenSimulator looks for the files which tell it
;; which regions to server
;; Default is "filesystem"
; region_info_source = "filesystem"
; region_info_source = "web"
;; Determines where the region XML files are stored if you are loading
;; these from the filesystem.
;; Defaults to bin/Regions in your OpenSimulator installation directory
; regionload_regionsdir="C:\somewhere\xmlfiles\"
;; Determines the page from which regions xml is retrieved if you are
;; loading these from the web.
;; The XML here has the same format as it does on the filesystem
;; (including the <Root> tag), except that everything is also enclosed
;; in a <Regions> tag.
; regionload_webserver_url = "http://example.com/regions.xml";
;# {allow_regionless} {} {Allow simulator to start up with no regions configured.} {true false} false
;; Allow the simulator to start up if there are no region configuration available
;; from the selected region_info_source.
; allow_regionless = false
;# {NonPhysicalPrimMax} {} {Maximum size of nonphysical prims?} {} 256
;; Maximum size for non-physical prims. Affects resizing of existing prims. This can be overriden in the region config file (as NonphysicalPrimMax!).
; NonPhysicalPrimMax = 256
;# {PhysicalPrimMax} {} {Maximum size of physical prims?} {} 10
;; Maximum size where a prim can be physical. Affects resizing of existing prims. This can be overriden in the region config file.
; PhysicalPrimMax = 10
;; If a viewer attempts to rez a prim larger than the non-physical or physical prim max, clamp the dimensions to the appropriate maximum
;; This can be overriden in the region config file.
; ClampPrimSize = false
;# {AllowScriptCrossing} {} {Allow scripts to cross into this region} {true false} true
;; Allow scripts to keep running when they cross region boundaries, rather than being restarted. State is reloaded on the destination region.
;; This only applies when crossing to a region running in a different simulator.
;; For crossings where the regions are on the same simulator the script is always kept running.
; AllowScriptCrossing = true
;# {TrustBinaries} {AllowScriptCrossing:true} {Accept compiled binary script code? (DANGEROUS!)} {true false} false
;; Allow compiled script binary code to cross region boundaries.
;; If you set this to "true", any region that can teleport to you can
;; inject ARBITRARY BINARY CODE into your system. Use at your own risk.
;; YOU HAVE BEEN WARNED!!!
; TrustBinaries = false
;# {CombineContiguousRegions} {} {Create megaregions where possible? (Do not use with existing content!)} {true false} false
;; Combine all contiguous regions into one large megaregion
;; Order your regions from South to North, West to East in your regions.ini
;; and then set this to true
;; Warning! Don't use this with regions that have existing content!,
;; This will likely break them
; CombineContiguousRegions = false
;; If you have only one region in an instance, or to avoid the many bugs
;; that you can trigger in modules by restarting a region, set this to
;; true to make the entire instance exit instead of restarting the region.
;; This is meant to be used on systems where some external system like
;; Monit will restart any instance that exits, thereby making the shutdown
;; into a restart.
; InworldRestartShutsDown = false
;; Persistence of changed objects happens during regular sweeps. The
;; following control that behaviour to prevent frequently changing objects
;; from heavily loading the region data store.
;; If both of these values are set to zero then persistence of all changed
;; objects will happen on every sweep.
;; Objects will be considered for persistance in the next sweep when they
;; have not changed for this number of seconds.
; MinimumTimeBeforePersistenceConsidered = 60
;; Objects will always be considered for persistance in the next sweep
;; if the first change occurred this number of seconds ago.
; MaximumTimeBeforePersistenceConsidered = 600
;; Should avatars in neighbor sims see objects in this sim?
; see_into_this_sim_from_neighbor = true
;# {physical_prim} {} {Allow prims to be physical?} {true false} true
;; if you would like to allow prims to be physical and move by physics
;; with the physical checkbox in the client set this to true.
; physical_prim = true
;; Select a mesher here.
;;
;; Meshmerizer properly handles complex prims by using triangle meshes.
;; Note that only the ODE physics engine currently deals with meshed
;; prims in a satisfactory way.
;; ZeroMesher is faster but leaves the physics engine to model the mesh
;; using the basic shapes that it supports.
;; Usually this is only a box.
;; Default is Meshmerizer
; meshing = Meshmerizer
; meshing = ZeroMesher
;; Choose one of the physics engines below
;; OpenDynamicsEngine is by some distance the most developed physics engine
;; BulletSim is incomplete and experimental but in active development
;; basicphysics effectively does not model physics at all, making all objects phantom
;; Default is OpenDynamicsEngine
; physics = OpenDynamicsEngine
; physics = BulletSim
; physics = basicphysics
; physics = POS
;# {permissionmodules} {} {Permission modules to use (may specify multiple modules, separated by space} {} DefaultPermissionsModule
;; Permission modules to use, separated by space.
; permissionmodules = "DefaultPermissionsModule"
;# {serverside_object_permissions} {permissionmodules:DefaultPermissionsModule} {Activate permission handling by the sim?} {true false} true
;; These are the parameters for the default permissions module
;;
;; If set to false, then, in theory, the server never carries out
;; permission checks (allowing anybody to copy
;; any item, etc. This may not yet be implemented uniformally.
;; If set to true, then all permissions checks are carried out
; serverside_object_permissions = true
;; This allows users with a UserLevel of 200 or more to assume god
;; powers in the regions in this simulator.
; allow_grid_gods = false
;; This allows some control over permissions
;; please note that this still doesn't duplicate SL, and is not intended to
; region_owner_is_god = true
; region_manager_is_god = false
; parcel_owner_is_god = true
;; Default script engine to use. Currently, we only have XEngine
; DefaultScriptEngine = "XEngine"
;; Map tile options. You can choose to generate no map tiles at all,
;; generate normal maptiles, or nominate an uploaded texture to
;; be the map tile
; GenerateMaptiles = true
;; If desired, a running region can update the map tiles periodically
;; to reflect building activity. This names no sense of you don't have
;; prims on maptiles. Value is in seconds.
; MaptileRefresh = 0
;; If not generating maptiles, use this static texture asset ID
; MaptileStaticUUID = "00000000-0000-0000-0000-000000000000"
;# {TextureOnMapTile} {} {Use terrain textures for map tiles?} {true false} true
;; Use terrain texture for maptiles if true, use shaded green if false
; TextureOnMapTile = true
;# {DrawPrimOnMapTile} {} {Draw prim shapes on map tiles?} {true false} false
;; Draw objects on maptile. This step might take a long time if you've
;; got a large number of objects, so you can turn it off here if you'd like.
; DrawPrimOnMapTile = true
;; Http proxy setting for llHTTPRequest and dynamic texture loading, if required
; HttpProxy = "http://proxy.com:8080"
;; If you're using HttpProxy, then you can set HttpProxyExceptions to a list of regular expressions for URLs that you don't want to go through the proxy
;; For example, servers inside your firewall.
;; Separate patterns with a ';'
; HttpProxyExceptions = ".mydomain.com;localhost"
;# {emailmodule} {} {Provide llEmail and llGetNextEmail functionality? (requires SMTP server)} {true false} false
;; The email module requires some configuration. It needs an SMTP
;; server to send mail through.
; emailmodule = DefaultEmailModule
;# {DeleteScriptsOnRestart} {} {Delete compiled script DLLs on restart?} (true false) true
;; Controls whether previously compiled scripts DLLs are deleted on sim restart. If you set this to false
;; then startup will be considerably faster since scripts won't need to be recompiled. However, then it becomes your responsibility to delete the
;; compiled scripts if you're recompiling OpenSim from source code and internal interfaces used
;; by scripts have changed.
; DeleteScriptsOnStartup = true
[SMTP]
;; The SMTP server enabled the email module to send email to external
;; destinations.
;# {enabled} {[Startup]emailmodule:DefaultEmailModule} {Enable SMTP service?} {true false} false
;; Enable sending email via SMTP
; enabled = false
;# {internal_object_host} {[Startup]emailmodule:DefaultEmailModule enabled:true} {Host name to treat as internal (object to object) email?} {} lsl.opensim.local
; internal_object_host = lsl.opensim.local
;# {host_domain_header_from} {[Startup]emailmodule:DefaultEmailModule enabled:true} {From address to use in the sent email header?} {} 127.0.0.1
; host_domain_header_from = "127.0.0.1"
;# {SMTP_SERVER_HOSTNAME} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server name?} {} 127.0.0.1
; SMTP_SERVER_HOSTNAME = "127.0.0.1"
;# {SMTP_SERVER_PORT} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server name?} {SMTP server port?} {} 25
; SMTP_SERVER_PORT = 25
;# {SMTP_SERVER_LOGIN} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server user name?} {}
; SMTP_SERVER_LOGIN = ""
;# {SMTP_SERVER_PASSWORD} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server password} {}
; SMTP_SERVER_PASSWORD = ""
[Network]
;; Configure the remote console user here. This will not actually be used
;; unless you use -console=rest at startup.
; ConsoleUser = "Test"
; ConsolePass = "secret"
; console_port = 0
;# {http_listener_port} {} {TCP Port for this simulator to listen on? (This must be unique to the simulator!)} {} 9000
;; Simulator HTTP port. This is not the region port, but the port the
;; entire simulator listens on. This port uses the TCP protocol, while
;; the region ports use UDP.
; http_listener_port = 9000
;# {ExternalHostNameForLSL} {} {Hostname to use for HTTP-IN URLs. This should be reachable from the internet.} {}
;; Hostname to use in llRequestURL/llRequestSecureURL
;; if not defined - default machine name is being used
;; (on Windows this mean NETBIOS name - useably only inside local network)
; ExternalHostNameForLSL = "127.0.0.1"
;# {shard} {} {Name to use for X-Secondlife-Shard header? (press enter if unsure)} {} OpenSim
;; What is reported as the "X-Secondlife-Shard"
;; Defaults to the user server url if not set
;; The old default is "OpenSim", set here for compatibility
;; The below is not commented for compatibility.
shard = "OpenSim"
;# {user_agent} {} {User agent to report to web servers?} {} OpenSim LSL (Mozilla Compatible)
;; What is reported as the "User-Agent" when using llHTTPRequest
;; Defaults to not sent if not set here. See the notes section in the wiki
;; at http://wiki.secondlife.com/wiki/LlHTTPRequest for comments on adding
;; " (Mozilla Compatible)" to the text where there are problems with a web server
; user_agent = "OpenSim LSL (Mozilla Compatible)"
[ClientStack.LindenUDP]
;; See OpensSimDefaults.ini for the throttle options. You can copy the
;; relevant sections and override them here.
;; DO NOT MODIFY OpenSimDefaults.ini, as your changes would be lost
;; with the next update!
;# {DisableFacelights} {} {Stop facelights from working?} {true false} false
;; Quash and remove any light properties from attachments not on the
;; hands. This allows flashlights and lanterns to function, but kills
;; silly vanity "Facelights" dead. Sorry, head mounted miner's lamps
;; will also be affected.
;; This is especially important in artistic builds that depend on lights
;; on the build for their appearance, since facelights will cause the
;; building's lights to possibly not be rendered.
; DisableFacelights = "false"
[ClientStack.LindenCaps]
;; For the long list of capabilities, see OpenSimDefaults.ini
;; Here are the few ones you may want to change. Possible values
;; are:
;; "" -- empty, capability disabled
;; "localhost" -- capability enabled and served by the simulator
;; "<url>" -- capability enabled and served by some other server
;;
; These are enabled by default to localhost. Change if you see fit.
Cap_GetTexture = "localhost"
Cap_GetMesh = "localhost"
; This is disabled by default. Change if you see fit. Note that
; serving this cap from the simulators may lead to poor performace.
Cap_WebFetchInventoryDescendents = ""
[SimulatorFeatures]
; Experimental new information sent in SimulatorFeatures cap for Kokua viewers
; meant to override the MapImage and search server url given at login, and varying
; on a sim-basis.
; Viewers that don't understand it, will ignore it
;MapImageServerURI = "http://127.0.0.1:9000/"
;SearchServerURI = "http://127.0.0.1:9000/"
[Chat]
;# {whisper_distance} {} {Distance at which a whisper is heard, in meters?} {} 10
;; Distance in meters that whispers should travel.
; whisper_distance = 10
;# {say_distance} {} {Distance at which normal chat is heard, in meters? (SL uses 20 here)} {} 30
;; Distance in meters that ordinary chat should travel.
; say_distance = 30
;# {shout_distance} {Distance at which a shout is heard, in meters?} {} 100
;; Distance in meters that shouts should travel.
; shout_distance = 100
[Messaging]
;# {OfflineMessageModule} {} {Module to use for offline message storage} {OfflineMessageModule *}
;; Module to handle offline messaging. The core module requires an external
;; web service to do this. See OpenSim wiki.
; OfflineMessageModule = OfflineMessageModule
;# {OfflineMessageURL} {OfflineMessageModule:OfflineMessageModule} {URL of offline messaging service} {}
;; URL of web service for offline message storage
; OfflineMessageURL = http://yourserver/Offline.php
;# {MuteListModule} {OfflineMessageModule:OfflineMessageModule} {} {} MuteListModule
;; Mute list handler (not yet implemented). MUST BE SET to allow offline
;; messages to work
; MuteListModule = MuteListModule
;# {MuteListURL} {OfflineMessageModule:OfflineMessageModule} {} {} http://yourserver/Mute.php
;; URL of the web service that serves mute lists. Not currently used, but
;; must be set to allow offline messaging to work.
; MuteListURL = http://yourserver/Mute.php
;; Control whether group messages are forwarded to offline users.
;; Default is true.
;; This applies to the core groups module (Flotsam) only.
; ForwardOfflineGroupMessages = true
[ODEPhysicsSettings]
;# {mesh_sculpted_prim} {[Startup]physics:OpenDynamicsEngine} {Mesh sculpties so they collide as they look?} {true false} true
;; Do we want to mesh sculpted prim to collide like they look?
;; If you are seeing sculpt texture decode problems
;; (messages such as "Decoded image with unhandled number of components: 0 shortly followed by a physcs exception")
;; then you might want to try setting this to false.
; mesh_sculpted_prim = true
;# {use_NINJA_physics_joints} {[Startup]physics:OpenDynamicsEngine} {Use jointed (NINJA) physics?} {true false} false
;; If you would like physics joints to be enabled through a special naming
;; convention in the client, set this to true.
;; (see NINJA Physics, http://opensimulator.org/wiki/NINJA_Physics)
; use_NINJA_physics_joints = false
[RemoteAdmin]
;; This is the remote admin module, which uses XMLRPC requests to
;; manage regions from a web interface.
;# {enabled} {} {Enable the remote admin interface?} {true false} false
; enabled = false
;# {port} {enabled:true} {Port to use for the remote admin interface? (0 = default)} {} 0
;; Set this to a nonzero value to have remote admin use a different port
; port = 0
;# {access_password} {enabled:true} {Password for the remote admin interface} {}
;; This password is required to make any XMLRPC call (should be set as
;; the "password" parameter)
; access_password = ""
;# {create_region_enable_voice} {enabled:true} {Enable voice for newly created regions?} {true false} false
;; set this variable to true if you want the create_region XmlRpc
;; call to unconditionally enable voice on all parcels for a newly
;; created region
; create_region_enable_voice = false
;# {create_region_public} {enabled:true} {Make newly created regions public?} {true false} false
;; set this variable to false if you want the create_region XmlRpc
;; call to create all regions as private per default (can be
;; overridden in the XmlRpc call)
; create_region_public = false
;# {enabled_methods} {enabled:true} {List of methods to allow, separated by |} {} all
;; enable only those methods you deem to be appropriate using a | delimited
;; whitelist.
;; For example:
;; enabled_methods = admin_broadcast|admin_save_oar|admin_save_xml
;; if this parameter is not specified but enabled = true, all methods
;; will be available
; enabled_methods = all
;; specify the default appearance for an avatar created through the remote
;; admin interface
;; This will only take effect is the file specified by the
;; default_appearance setting below exists
; default_male = Default Male
; default_female = Default Female
;; Update appearance copies inventory items and wearables of default
;; avatars. if this value is false, just worn assets are copied to the
;; Clothes folder; if true, all Clothes and Bodyparts subfolders are copied.
;; The receiver will wear the same items the default avatar did wear.
; copy_folders = false
;; Path to default appearance XML file that specifies the look of the
;; default avatars
; default_appearance = default_appearance.xml
[Wind]
;# {enabled} {} {Enable wind module?} {true false} true
;; Enables the wind module.
; enabled = true
;# {wind_update_rate} {enabled:true} {Wind update rate in frames?} {} 150
;; How often should wind be updated, as a function of world frames.
;; Approximately 50 frames a second
; wind_update_rate = 150
;; The Default Wind Plugin to load
; wind_plugin = SimpleRandomWind
;; These settings are specific to the ConfigurableWind plugin
;; To use ConfigurableWind as the default, simply change wind_plugin
;; to ConfigurableWind and uncomment the following.
; avg_strength = 5.0
; avg_direction = 0.0
; var_strength = 5.0
; var_direction = 30.0
; rate_change = 1.0
;# {strength} {enabled:true wind_plugin:SimpleRandomWind} {Wind strength?} {} 1.0
;; This setting is specific to the SimpleRandomWind plugin
;; Adjusts wind strength. 0.0 = no wind, 1.0 = normal wind.
; strength = 1.0
[LightShare]
;# {enable_windlight} {} {Enable LightShare technology?} {true false} false
;; This enables the transmission of Windlight scenes to supporting clients,
;; such as the Meta7 viewer.
;; It has no ill effect on viewers which do not support server-side
;; windlight settings.
;; Currently we only have support for MySQL databases.
; enable_windlight = false
[DataSnapshot]
;# {index_sims} {} {Enable data snapshotting (search)?} {true false} false
;; The following set of configs pertains to search.
;; Set index_sims to true to enable search engines to index your
;; searchable data.
;; If false, no data will be exposed, DataSnapshot module will be off,
;; and you can ignore the rest of these search-related configs.
; index_sims = false
;# {data_exposure} {index_sims:true} {How much data should be exposed?} {minimum all} minimum
;; The variable data_exposure controls what the regions expose:
;; minimum: exposes only things explicitly marked for search
;; all: exposes everything
; data_exposure = minimum
;# {gridname} {index_sims:true} {Enter the name fo your grid} {} OSGrid
;; If search is on, change this to your grid name; will be ignored for
;; standalones
; gridname = "OSGrid"
;# {default_snapshot_period} {index_sims:true} {Period between data snapshots?} {} 1200
;; Period between data snapshots, in seconds. 20 minutes, for starters,
;; so that you see the initial changes fast.
;; Later, you may want to increase this to 3600 (1 hour) or more
; default_snapshot_period = 1200
;; This will be created in bin, if it doesn't exist already. It will hold
;; the data snapshots.
; snapshot_cache_directory = "DataSnapshot"
;# {data_services} {index_sims:true} {Data service URLs to register with?} {} http://metaverseink.com/cgi-bin/register.py
; This semicolon-separated string serves to notify specific data services
; about the existence of this sim. Uncomment if you want to index your
; data with this and/or other search providers.
; data_services="http://metaverseink.com/cgi-bin/register.py"
[Economy]
;; The economy module is not enabled by default and there is no easy,
;; menu controlled way to do this. To enabled this module, insert
;; economymodule = BetaGridLikeMoneyModule
;; into the startup section (at the top of this file).
;; Then configure the options below as needed.
;; Enables selling things for $0
; SellEnabled = "false"
;; Money Unit fee to upload textures, animations etc
; PriceUpload = 0
;; Money Unit fee to create groups
; PriceGroupCreate = 0
[XEngine]
;# {Enabled} {} {Enable the XEngine scripting engine?} {true false} true
;; Enable this engine in this OpenSim instance
; Enabled = true
;; How many threads to keep alive even if nothing is happening
; MinThreads = 2
;; How many threads to start at maximum load
; MaxThreads = 100
;; Time a thread must be idle (in seconds) before it dies
; IdleTimeout = 60
;# {Priority} {Enabled:true} {Priority for script engine threads?} {Lowest BelowNormal Normal AboveNormal Highest} BelowNormal
;; Thread priority ("Lowest", "BelowNormal", "Normal", "AboveNormal",
;; "Highest")
; Priority = "BelowNormal"
;; Maximum number of events to queue for a script (excluding timers)
; MaxScriptEventQueue = 300
;; Stack size per thread created
; ThreadStackSize = 262144
;; Set this to true (the default) to load each script into a separate
;; AppDomain. Setting this to false will load all script assemblies into the
;; current AppDomain, which will reduce the per-script overhead at the
;; expense of reduced security and the inability to garbage collect the
;; script assemblies
; AppDomainLoading = true
;# {DefaultCompileLanguage} {Enabled:true} {Default script language?} {lsl vb cs} lsl
;; Default language for scripts
; DefaultCompileLanguage = "lsl"
;# {AllowedCompilers} {Enabled:true} {Languages to allow (comma separated)?} {} lsl
;; List of allowed languages (lsl,vb,cs)
;; AllowedCompilers=lsl,cs,js,vb.
;; *warning*, non lsl languages have access to static methods such as
;; System.IO.File. Enable at your own risk.
; AllowedCompilers = "lsl"
;; Compile debug info (line numbers) into the script assemblies
; CompileWithDebugInformation = true
;; Allow the user of mod* functions. This allows a script to pass messages
;; to a region module via the modSendCommand() function
;; Default is false
; AllowMODFunctions = false
;# {AllowOSFunctions} {Enabled:true} {Allow OSFunctions? (DANGEROUS!)} {true false} false
;; Allow the use of os* functions (some are dangerous)
; AllowOSFunctions = false
;# {AllowLightShareFunctions} {Enabled:true [LightShare]enable_windlight:true} {Allow LightShare functions?} {true false} true
; Allow the user of LightShare functions
; AllowLightShareFunctions = false
;# {OSFunctionThreatLevel} {Enabled:true AllowOSFunctions:true} {OSFunction threat level? (DANGEROUS!)} {None VeryLow Low Moderate High VeryHigh Severe} VeryLow
;; Threat level to allow, one of None, VeryLow, Low, Moderate, High,
;; VeryHigh, Severe
OSFunctionThreatLevel = VeryLow
; OS Functions enable/disable
; For each function, you can add one line, as shown
; The default for all functions allows them if below threat level
; true allows the use of the function unconditionally
; Allow_osSetRegionWaterHeight = true
; false disables the function completely
; Allow_osSetRegionWaterHeight = false
; Comma separated list of UUIDS allows the function for that list of UUIDS
; Allow_osSetRegionWaterHeight = 888760cb-a3cf-43ac-8ea4-8732fd3ee2bb
; You can also use script creators as the uuid
; Creators_osSetRegionWaterHeight = <uuid>, ...
; If both Allow_ and Creators_ are given, effective permissions
; are the union of the two.
;; Time a script can spend in an event handler before it is interrupted
; EventLimit = 30
;; If a script overruns it's event limit, kill the script?
; KillTimedOutScripts = false
;; Sets the multiplier for the scripting delays
; ScriptDelayFactor = 1.0
;; The factor the 10 m distances llimits are multiplied by
; ScriptDistanceLimitFactor = 1.0
;; Maximum length of notecard line read
;; Increasing this to large values potentially opens
;; up the system to malicious scripters
; NotecardLineReadCharsMax = 255
;; Sensor settings
; SensorMaxRange = 96.0
; SensorMaxResults = 16
;; Disable underground movement of prims (default true); set to
;; false to allow script controlled underground positioning of
;; prims
; DisableUndergroundMovement = true
;; Path to script engine assemblies
;; Default is ./bin/ScriptEngines
; ScriptEnginesPath = "ScriptEngines"
[MRM]
;; Enables the Mini Region Modules Script Engine.
; Enabled = false
;; Runs MRM in a Security Sandbox
;; WARNING: DISABLING IS A SECURITY RISK.
; Sandboxed = true
;; The level sandbox to use, adjust at your OWN RISK.
;; Valid values are:
;; * FullTrust
;; * SkipVerification
;; * Execution
;; * Nothing
;; * LocalIntranet
;; * Internet
;; * Everything
; SandboxLevel = "Internet"
;; Only allow Region Owners to run MRMs
;; May represent a security risk if you disable this.
; OwnerOnly = true
[FreeSwitchVoice]
;; In order for this to work you need a functioning FreeSWITCH PBX set up.
;; Configuration details at http://opensimulator.org/wiki/Freeswitch_Module
; Enabled = false
;; You need to load a local service for a standalone, and a remote service
;; for a grid region. Use one of the lines below, as appropriate
;; If you're using Freeswitch on a standalone then you will also need to configure the [FreeswitchService] section in config-include/StandaloneCommon.ini
; LocalServiceModule = OpenSim.Services.FreeswitchService.dll:FreeswitchService
; LocalServiceModule = OpenSim.Services.Connectors.dll:RemoteFreeswitchConnector
;; If using a remote connector, specify the server URL
; FreeswitchServiceURL = http://my.grid.server:8004/fsapi
[Groups]
;# {Enabled} {} {Enable groups?} {true false} false
;; Enables the groups module
; Enabled = false
;# {Module} {Enabled:true} {Groups module to use? (Use GroupsModule to use Flotsam/Simian)} {} Default
;; This is the current groups stub in Region.CoreModules.Avatar.Groups.
;; All the other settings below only really apply to the Flotsam/SimianGrid
;; GroupsModule.
;; This module can use a PHP XmlRpc server from the Flotsam project at
;; http://code.google.com/p/flotsam/
;; or from the SimianGrid project at http://code.google.com/p/openmetaverse
; Module = Default
;# {MessagingEnabled} {Module:GroupsModule} {Is groups messaging enabled?} {true false} true
; MessagingEnabled = true
;# {MessagingModule} {MessagingEnabled:true} {Module to use for groups messaging} {GroupsMessagingModule} GroupsMessagingModule
; MessagingModule = GroupsMessagingModule
;# {ServicesConnectorModule} {Module:GroupsModule} {Service connector to use for groups} {XmlRpcGroupsServicesConnector SimianGroupsServicesConnector} XmlRpcGroupsServicesConnector
;; Service connectors to the Groups Service as used in the GroupsModule. Select one depending on
;; whether you're using a Flotsam XmlRpc backend or a SimianGrid backend
; ServicesConnectorModule = XmlRpcGroupsServicesConnector
;# {GroupsServerURI} {Module:GroupsModule} {Groups Server URI} {}
;; URI for the groups services
;; e.g. http://yourxmlrpcserver.com/xmlrpc.php for Flotsam XmlRpc
;; or http://mygridserver.com:82/Grid/ for SimianGrid
; GroupsServerURI = ""
;# {NoticesEnabled} {Module:GroupsModule} {Enable group notices?} {true false} true
;; Enable Group Notices
; NoticesEnabled = true
;; This makes the Groups modules very chatty on the console.
; DebugEnabled = false
;; XmlRpc Security settings. These must match those set on your backend
;; groups service if the service is using these keys
; XmlRpcServiceReadKey = 1234
; XmlRpcServiceWriteKey = 1234
[InterestManagement]
;# {UpdatePrioritizationScheme} {} {Update prioritization scheme?} {BestAvatarResponsiveness Time Distance SimpleAngularDistance FrontBack} BestAvatarResponsiveness
;; This section controls how state updates are prioritized for each client
;; Valid values are BestAvatarResponsiveness, Time, Distance,
;; SimpleAngularDistance, FrontBack
; UpdatePrioritizationScheme = BestAvatarResponsiveness
[MediaOnAPrim]
;# {Enabled} {} {Enable Media-on-a-Prim (MOAP)} {true false} true
;; Enable media on a prim facilities
; Enabled = true;
[NPC]
;# {Enabled} {} {Enable Non Player Character (NPC) facilities} {true false} false
; Enabled = false
[PrimLimitsModule]
;# {EnforcePrimLimits} {} {Enforce parcel prim limits} {true false} false
;; Enable parcel prim limits. Off by default to emulate pre-existing behavior.
; EnforcePrimLimits = false
[Architecture]
;# {Include-Architecture} {} {Choose one of the following architectures} {config-include/Standalone.ini config-include/StandaloneHypergrid.ini config-include/Grid.ini config-include/GridHypergrid.ini config-include/SimianGrid.ini config-include/HyperSimianGrid.ini} config-include/Standalone.ini
;; Uncomment one of the following includes as required. For instance, to create a standalone OpenSim,
;; uncomment Include-Architecture = "config-include/Standalone.ini"
;;
;; Then you will need to copy and edit the corresponding *Common.example file in config-include/
;; that the referenced .ini file goes on to include.
;;
;; For instance, if you chose "config-include/Standalone.ini" then you will need to copy
;; "config-include/StandaloneCommon.ini.example" to "config-include/StandaloneCommon.ini" before
;; editing it to set the database and backend services that OpenSim will use.
;;
; Include-Architecture = "config-include/Standalone.ini"
; Include-Architecture = "config-include/StandaloneHypergrid.ini"
; Include-Architecture = "config-include/Grid.ini"
; Include-Architecture = "config-include/GridHypergrid.ini"
; Include-Architecture = "config-include/SimianGrid.ini"
; Include-Architecture = "config-include/HyperSimianGrid.ini"