0194a3d890
BulletSim: fix density since the simulator/viewer track density in a
...
funny unit that is 100 times real density (default 1000).
Fix avatar drifting slowly when stationary flying.
Fix for physical prims getting corrected for being under terrain when it was
just its geometric center that was below terrain.
Add PreUpdatePropertyAction allowing plugable modifiction of phys
parameters returned from Bullet.
Fix an exception setting GravityMultiplier on initialization.
Update DLLs and SOs for good measure (no functional change).
2013-02-12 15:52:10 -08:00
4808b8ee38
BulletSim: add parameter to set global contact breaking threshold. Update DLLs and SOs for setting same.
2013-02-08 16:29:52 -08:00
3646361279
BulletSim: make removing zero width triangles from meshes optional
...
and, for the moment, default to 'off'.
2013-02-05 17:19:55 -08:00
ad438ee59f
BulletSim: rework some parameter setting implementation moving functionality that was in BSScene to BSParam. Remove unused parameters that were passed to the unmanaged code. Update DLLs and SOs for the new param block.
2013-02-05 16:56:23 -08:00
e9aff0a91d
BulletSim: do not zero an avatar's standing velocity if it is standing
...
on a moving object.
Rearrange pre/post action subscription code to put more in locks.
Add meshmerizer params to BulletSimTestUtil scene creation (and fix line endings).
Rebuilt version of DLLs and SOs with cleaned up code and no profiling for sure.
2013-01-28 15:11:50 -08:00
2cd56014a7
BulletSim: update Bullet with profiling disabled. This seems to fix the memory leak problem.
2013-01-28 06:21:51 -08:00
1c3d84fe03
BulletSim: pass up and report the real collision penetration.
2013-01-23 16:20:44 -08:00
459fcd81c9
BulletSim: move center of gravity of linkset to its geometric center.
...
Necessitated allowing simulator and physical position of a body to
get out of sync since Bullet assumes that <0,0,0> is the center of mass.
Update DLLs and SOs for the UpdateChildTransform so positions of
individual prim in a linkset can be implemented.
2013-01-11 16:47:53 -08:00
9393403253
BulletSim: update DLLs and SOs with better debugging output.
...
Add definition of hand crafted avatar mesh. Not used yet.
Comments and cleanup.
2013-01-06 14:01:15 -08:00
2eda385f5e
BulletSim: add ResetBroadphasePool and ResetConstraintSolver diagnostic
...
functions. If values set from console, the functions are called. Looking
for why the collision pools fill up with unnecessary stuff.
2013-01-04 17:06:48 -08:00
9396ccc078
BulletSim: eliminate the use of the unmanaged HeightMapInfo structure.
...
Remove all related calls from the unmanaged and BSAPITemplate interfaces.
Update DLLs and SOs to include the version without HeightMapInfo structures.
2012-12-31 19:57:25 -08:00
3d0fc70864
BulletSim: complete movement of BulletSimAPI functions to BSAPITemplate.
...
Update BulletSim DLLs and SOs with simplier step function interface.
2012-12-31 19:57:24 -08:00
707e186aa3
BulletSim: update DLLs and SOs with vehicle collision event check
2012-12-06 09:34:30 -08:00
787636b97a
BulletSim: Reduce idle region physics overhead where there are MANY
...
static objects by more restrictive selection of objects that collide
with static objects.
Rename collision mask fuctions from 'filter' to 'group' so it is clear
what is being set.
Rename BulletSimAPI.SetCollisionFilterMask() to SetCollisionGroupMask to match above.
Restore passing of time step to linear and angular motion component routines.
Use buffering vehicle physical parameter get/set routines consistantly.
Make range enforcement clearer by using ClampInRange() function for parameter setting.
Remove commented out experimental vehicle calculations.
2012-12-03 16:25:51 -08:00
b124aae05e
BulletSim: Add DumpActivationInfo2 function. Change static objects from DISABLE_SIMULATION to ISLAND_SLEEPING. Update DLLs and SOs to add DumpActivationInfo2 function.
2012-12-01 15:39:13 -08:00
24b3b4df2e
BulletSim: update DLLs and SOs to remove simulator crash when calling SetInterpolationAngularVelocity.
2012-11-28 09:48:41 -08:00
bd635e264a
BulletSim: update DLLs and SOs with new collision margin setting function.
2012-11-25 20:04:31 -08:00
56ef180c92
BulletSim: update DLLs and SOs. No functional changes. Only the parameter block format changed.
2012-11-21 16:44:02 -08:00
079a1e704f
BulletSim: remove the obsolete interface to the Bullet code. Update BulletSim libraries with code stripped of the obsolete code.
2012-11-18 18:17:30 -08:00
6df9d40d99
BulletSim: update the DLLs and SOs
2012-11-06 18:17:00 -08:00
895d28f14d
BulletSim: update the DLLs and SOs
2012-11-03 21:28:23 -07:00
de47646c3d
BulletSim: update binaries with small change that insures that manual position/rotation setting results in an update event.
2012-10-23 17:34:14 -07:00
45df324ab3
Bulletsim: update DLLs and SOs. Brings C++ routine in sync with C# sources and fixes problem where BulletSim would crash on startup on 32 bit Linux.
2012-10-19 15:47:51 -07:00
b63134764f
BulletSim: update the DLLs and SOs
2012-10-11 14:01:35 -07:00
a5b8359b8e
BulletSim: fix crash on load that showed up on 32bit Linux.
2012-10-02 17:04:33 -07:00
7f96bb601a
BulletSim: update SOs and DLLs
2012-09-28 12:51:47 -07:00
b602b476ad
BulletSim: update DLLs and SOs and remove some debugging code.
2012-09-15 15:36:13 -07:00
d8df2d6bed
BulletSim: update the DLLs and SOs
2012-09-07 16:05:34 -07:00
32b534f324
BulletSim: update the SOs and DLLs
2012-08-31 11:41:39 -07:00
568de9313a
BulletSim: update DLLs and SOs to eliminate terrain update crash which manifested itself on Linux.
2012-08-21 20:55:48 -07:00
ae5db637f2
BulletSim: update DLLs and SOs to fix the problem with avatars jumping around at altitudes less than 25m.
2012-08-15 16:29:46 -07:00
9f83f4bfa3
BulletSim: update DLLs and SOs
2012-08-15 12:08:29 -07:00
3a55d5b123
BulletSim: actually update the DLLs and SOs
2012-08-10 16:34:22 -07:00
19417fca41
BulletSim: Added avatar capsule scaling for size of avatar.
...
This also fixes computation of avatar mass.
Added parameter MaxPersistantManifoldPoolSize.
Fixed a parameter setting bug which caused crashes of there were
more than 400 or so physical objects. I tested up to 5000.
Updated BulletSim DLLs and SOs.
2012-08-07 17:15:06 -07:00
4adb3471ac
BulletSim: update SOs and DLLs to run on more Linux versions. Correct multiple buoyancy settings when character flying. Remove chatty log message on prim destruction.
2012-08-06 12:55:52 -07:00
d5cd60131f
BulletSim: update DLLs and SOs
2012-08-03 15:10:00 -07:00
8b04e8a297
BulletSim: Debugging log statements added. Reduced size of updata buffer trying to find a corrupted memory problem. Update DLL and SO.
2012-08-02 16:30:23 -07:00
c51ef38e2d
BulletSim: fix problem where resizing a primary shape (cube or sphere) would not rebuild the physics mesh. Update the DLLs and SOs to latest version.
2012-07-31 16:23:52 -07:00
f9a8915cca
BulletSim: update the DLLs and SOs. This fixes the exception on shutdown
2012-07-31 09:44:32 -07:00
c6d02801db
BulletSim: update BulletSim DLLs and SOs
2012-07-25 16:31:22 -07:00
892dd59b13
BulletSim: update BulletSim.dlls and so's
2012-07-23 16:38:31 -07:00
ac612e2105
Update BulletSim DLLs and SOs
2012-07-20 16:12:54 -07:00
b25d874afa
BulletSim: add reference to OpenSim.Region.CoreModules in BSScene.cs attempting to fix a mono compile error.
2012-07-20 15:34:19 -07:00
af9d8de515
BulletSim: update the binaries to the current sources
2012-07-06 15:56:35 -07:00
4138880464
BulletSim: update 64 bit libraries and change Linux configuration to use the files in the lib32 and lib64 directories as needed.
2012-03-28 15:36:20 -07:00
84c9bd52d3
BulletSim: update BulletSim binaries and configuration fixing a crash which happens when there are more than a few hundred physical objects.
2012-03-26 13:48:15 -07:00
3691e39178
BulletSim: update BulletSim.dll and libBulletSim.so with latest versions
2012-03-26 08:48:51 -07:00
2f6e8564fe
BulletSim: add updated (but not working) BulletSim dlls
2012-03-23 13:15:20 -07:00
6c50442625
BulletSim: update BulletSim.dll to Bullet 2.80 and add libBulletSim.so to the new lib32 and lib64 binary directories
2012-03-23 13:15:13 -07:00
a27e5a9c95
Both 32-bit and 64-bit BulletSim.dll must have the same name. Rename the 64 bit one in lib64
2012-02-21 04:12:17 +00:00
Robert Adams