9177d28b5c
Add some missing refs removed during formatting
2012-07-17 13:30:07 -04:00
39e5546bbb
Merge branch 'master' of /home/opensim/var/repo/opensim
2012-07-17 09:06:25 -04:00
c489bc1cd2
Make the scrpt running flag work properly
2012-07-17 15:00:42 +02:00
356d597296
Restore update of inventory item on derez/logout. This is necessary to update the name if this has been changed whilst attached.
...
Note, this behaviour appears to be at variance with the ll grid as of Tues 17 July 2012, testing with viewer 3.2.1.
The item name in inventory does not change either at the point of detach or after a relog.
2012-07-17 00:17:51 +01:00
b0facd147a
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-07-17 00:02:45 +01:00
b6476eaac3
Stop sending the viewer an inventory create message if a known attachment item is updated.
...
This doesn't seem to make any sense and probably stems from a period when this code was directly involved in attaching objects directly from the scene.
This message is already being sent by InventoryAccessModule code instead.
2012-07-17 00:00:26 +01:00
2a85372169
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2012-07-16 23:33:33 +01:00
1c3b0da74a
Revert "Fix script "Running" behavior"
...
A better solution using the already present flags must be found.
This reverts commit 6d3ee8bb39
2012-07-16 23:31:55 +01:00
c1667d39a6
refactor: factor out common code in WebStatsModule.OnMakeRootAgent()
2012-07-16 23:15:02 +01:00
217f47b0d5
In WebStatsModule.OnMakeRootAgent(), get region ID directly from SP.Scene.RegionInfo.RegionID instead of manually looking it up from the stored scene list.
2012-07-16 23:09:48 +01:00
ed14dac0a3
Stop warning about no session from ViewerStats if user teleports to another region in the same simulator that was not next to the source region.
...
This was because teleporting to the new region invoked the new session setup code before the agent was removed from the old region, which then invoked the session teardown code.
Now, we only invoke the teardown code if the region ID occupied by the agent being removed is the same as the one registered for the current session.
2012-07-16 23:03:23 +01:00
ee7478fa16
sending more user-friendly messages to the script error window rather than the thrown exceptions.
...
Signed-off-by: Melanie <melanie@t-data.com>
2012-07-16 21:32:38 +01:00
5d3723a47f
update PrimMesher.cs to dll version r72 which fixes some path errors in sliced linear prims. Addresses Mantis #6085
2012-07-13 21:22:15 -07:00
afa2d7eea3
Some formatting changes
2012-07-13 23:15:11 -04:00
1352a38680
Change name of class IUtils ot IntegrationUtils
2012-07-13 22:03:56 -04:00
ea7d56b232
Merge branch 'master' of /home/opensim/var/repo/opensim
2012-07-13 22:01:18 -04:00
84b7ae2573
acting on feedback from justincc
2012-07-14 01:45:34 +01:00
423101b425
acting on feedback from justincc
2012-07-14 01:45:34 +01:00
e3453dd9ca
added in some extra variables, it sometimes thinks it is on the same parcel :(
...
Signed-off-by: SignpostMarv <github@signpostmarv.name>
2012-07-14 01:45:34 +01:00
b6cd3b625e
adding workaround for silent failure if position is outside the bounds of a region, implementing parcel prim count check.
...
Signed-off-by: SignpostMarv <github@signpostmarv.name>
2012-07-14 01:45:34 +01:00
8d59385eea
Implementation of llSetRegionPos(). Does not implement failure on object entry/prim limit/access restrictions.
...
Signed-off-by: SignpostMarv <github@signpostmarv.name>
2012-07-14 01:45:34 +01:00
ec6a195e40
When generating a Warp3D texture, set the detailTexture[i] variable on resize from the JPEG2000 original rather than only saving it to disk.
...
This appears to be the cause of the warp 3d exception seen when starting a new region for the first time.
Subsequent starts were okay because resized saved bitmap was correctly retrieved from disk.
Should fix http://opensimulator.org/mantis/view.php?id=5204 and http://opensimulator.org/mantis/view.php?id=5272
2012-07-14 01:11:30 +01:00
6e4e26d213
Merge branch 'master' of /home/opensim/var/repo/opensim
...
Conflicts:
OpenSim/Server/Handlers/Presence/PresenceServerPostHandler.cs
2012-07-12 22:42:45 -04:00
2954ceccae
Remove a callstack print out I accidentally left in 2 commits ago in 9ccb578
2012-07-13 01:08:49 +01:00
884d603cac
Rather than instantiating a UTF8 encoding everywhere when we want to supress the BOM, use a single Util.UTF8NoBomEncoding.
...
This class is thread-safe (as evidenced by the provision of the system-wide Encoding.UTF8 which does not suppress BOM on output).
2012-07-13 01:03:28 +01:00
9ccb578721
Don't cache regions data on the other unused LocalGridServiceConnector that the module code still sets up even if we're using one directly instantiated from the RemoteGridServiceConnector.
...
Also improves log messages to indicate which regions are sending/receiving various neighbour protocol messages.
2012-07-13 00:44:00 +01:00
d6f54b25cd
Stop redundantly passing in the endpoint to the LLClientView constructor.
...
This can always be retrieved via the LLUDPClient and is so done in various places already.
2012-07-12 23:48:42 +01:00
dda999a22c
Remove IClientIPEndpoint client interface for now.
...
This may well come back in the future when this subinterface is actually used but it currently isn't and I feel the name was poor.
Everything uses IClientAPI.RemoveEndPoint which also returned the full endpoint rather than just the ip address.
2012-07-12 23:43:02 +01:00
3b3d9967b1
Remove IClientAPI.GetClientEP() in favour of existing identical IClientAPI.RemoteEndpoint.
2012-07-12 23:29:57 +01:00
75ab9b4b88
Change very recent AllowedViewerList and BannedViewerList config setting names in OpenSim.ini.example to AllowedClients and BannedClients to match long-existing settings in [LoginService]
...
Also changes separator from comma to bar to match existing [LoginService] config features.
Divergence of config names for identical facilities in different places makes for an unnecessarily confusing user experience.
2012-07-12 23:18:30 +01:00
15283d35f1
Extend "show circuits" to show circuit code, ip and viewer name.
...
Also change to use standard table formatting
"show circuits" and "show connections" console commands are very similar but access different data structures.
2012-07-12 23:09:36 +01:00
6a0de355e0
Add active status to "show connections"
2012-07-12 22:37:48 +01:00
65a25ee510
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-07-12 22:35:38 +01:00
ca412032e8
Put output for "show connections" command into standard table format.
...
Also moves into own method.
2012-07-12 21:36:33 +01:00
e28e2ef3ac
Merge branch 'master' of /home/opensim/var/repo/opensim
2012-07-11 19:41:17 -04:00
743437262e
Many explanitory comments added to the link and delink code in
...
SOG and SOP. Should have no functionality changes.
2012-07-11 16:12:38 -07:00
916e3bf886
Where possible, use the system Encoding.ASCII and Encoding.UTF8 rather than constructing fresh copies.
...
The encodings are thread-safe and already used in such a manner in other places.
This isn't done where Byte Order Mark output is suppressed, since Encoding.UTF8 is constructed to output the BOM.
2012-07-11 22:54:22 +01:00
9c89ad9154
Fix build break for windows with missing package for IScriptEngine in prebuild.xml for OpenSim.Region.CoreModules.Tests.dll
2012-07-11 22:15:53 +01:00
77f08ae632
Merge branch 'master' of /home/opensim/var/repo/opensim
2012-07-11 17:13:51 -04:00
33cff9b9d7
Allow XEngine StartDelay to be configured in the [XEngine] config section.
...
This is only currently meant for use by regression tests that don't have any issues if XEngine is started up quickly, since no other operations will be occuring simultaneously.
Therefore, this is not yet documented externally.
2012-07-11 21:55:18 +01:00
0e611c47d3
Remove WorldComm module from the regression TestCompileAndStartScript() since the infrastructure no longer fails if this module isn't present, at least on the tested codepaths
2012-07-11 21:46:46 +01:00
fc24563206
Add regression TestDetachScriptedAttachmentToInventory()
...
This currently only does a relatively crude check for a ScriptState node in the serialized xml
2012-07-11 21:43:35 +01:00
14d05dc2a9
Add regression TestRezScriptedAttachmentsFromInventory() though this currently only checks for the presence of script items, not for started scripts
2012-07-11 19:54:40 +01:00
466d3793b1
Merge branch 'master' of /home/opensim/var/repo/opensim
2012-07-10 22:32:21 -04:00
337ea019bd
If a part has a sit target and an avatar is already sitting, allow another avatar to sit in the position given if no sit target was set.
...
Previous behave was that the second avatar could not sit.
This matches behaviour observed on the LL grid.
2012-07-10 23:55:22 +01:00
cdea572d2e
refactor: move management of SOP.SitTargetAvatar into SOP.AddSittingAvatar() and SOP.RemoveSittingAvatar()
2012-07-10 23:50:04 +01:00
11e0ad6dc8
Revert "refactor: Add SOP.IsSitTargetOccupied to improve readability"
...
This reverts commit c8f0d476d2
2012-07-10 23:39:05 +01:00
c8f0d476d2
refactor: Add SOP.IsSitTargetOccupied to improve readability
2012-07-10 23:34:40 +01:00
69a6f6e3cd
refactor: use sit orientation argument passed in to SP.SendSitResponse() rather than creating a new copy
...
There are no issues with side-effects since this is a struct.
2012-07-10 23:26:40 +01:00
e8347b7095
Move common code to detect whether a part has a valid sit target into a SOP property rather than being repeated in SP.
...
This also makes the detection in SP.FindNextAvailableSitTarget() and SendSitResponse() identical.
Previously they varied slightly (SendSitResponse didn't check for an older type of invalid quaternion) but the practical effect is most probably zero.
2012-07-10 23:21:39 +01:00
BlueWall