4d2203ff52
BulletSim: Add dylib for BulletSim and add he who figured out building BulletSim
...
on a Mac to the CONTRIBUTORS file.
2013-04-08 09:15:20 -07:00
f68b963596
fixed bullet config for osx
...
Signed-off-by: Robert Adams <Robert.Adams@intel.com>
2013-04-08 09:09:30 -07:00
17aef1c883
BulletSim: update unmanaged API for HACD parameter passing. Bullet HACD
...
mesh to hull conversion calls in place but code not working. Update
BulletSim DLLs and SOs for new API and HACD code.
2013-04-01 18:03:11 -07:00
6e1b3f9951
*Yet another HTTPServer update code changes in OpenSim Libs. * This fixes a connection close issue by getting rid of the socket references * This adds a connection timeout checker to shutdown poor or evil connections and combats DOS attempts that just connect and make no complete requests and just wait. It also actually implements KeepAlive... instead of just understanding the connection header in the request... you can test by connecting and requesting a keepalive header and sending another request on the same connection. The new timeout checker closes expired keepalive sessions, just make sure you send the request within 70 seconds of connecting or the timeout checker will timeout the connection.
2013-03-16 03:14:11 -04:00
9fad90a914
Merge branch 'master' of ssh://opensim/var/git/opensim
2013-03-14 00:58:00 -04:00
42c533c589
* Updates HttpServer again to re-add the code that closes the stream and connection when It's done sending. Be on the lookout for an old linux/mono bug where the client doesn't get the last bit of the stream before it is disconnected!. Code on opensim-libs. All tests pass.. HttpServer's internal tests pass.. but just a bad feeling. More people should test :)
2013-03-14 00:57:42 -04:00
fb1211ad5e
Add DisableInterRegionTeleportCancellation option in [EntityTransfer] section of OpenSim.ini. False by default.
...
This option allows the simulator to specify that the cancel button on inter-region teleports should never appear.
This exists because sometimes cancellation will result in a stuck avatar requiring relog.
It may be hard to prevent this due to the protocol design (the LL grid has the same issue)
In small controlled grids where teleport failure is practically impossible it can be better to disable teleport cancellation entirely.
2013-03-12 23:01:27 +00:00
13f3bcae94
Update comment about setting physics=BulletSimN as the C# Bullet
...
version has been wrapped into one BulletSim and the physics engine
selection is now done as specified in OpenSimDefaults.ini.
2013-03-10 22:24:34 -07:00
2f1aa87eb5
One more comment inconsistency fixed.
2013-03-07 08:02:48 -08:00
fdebee25db
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-03-07 06:41:03 -08:00
2b0056eaca
Fixed inconsistency in comments. Thanks Ai Austin.
2013-03-07 06:40:39 -08:00
7556b42d7a
* Update LibOMV to f8f8e616b37a7ea22b7922b2331999bc06725bf9
...
* Add zero length blocks to the new packet blocks to remain compatible with older viewers and avoid a NullRef when _packets_.cs calls the Length parameter.. which adds up the Length property all of the blocks.
2013-03-04 21:26:26 -05:00
aadf7d32d1
GridUserService was missing from [Gatekeeper]
2013-03-04 12:52:28 -08:00
b47ffb5dc4
Added existance and default value for [XEngine]MinTimerInterval to OpenSimDefaults.ini
2013-03-02 13:02:02 -08:00
1bc8692a99
Move AllowedClients and BannedClients section to new [AccessControl] section in OpenSim.ini from [Startup]
...
This change also corrects the setting names - they were actually wrong (though the text in {} was correct).
If there are settings in [Startup] they will continue to be used and anything there will override settings in [AccessControl]
2013-03-02 01:43:54 +00:00
4999d7920a
Revert "Removed more vars from [Startup]. I think these were already moved elsewhere, because I can't find any reference to them in the code."
...
This reverts commit efa7227865
2013-03-02 01:23:01 +00:00
20530ee667
Moved permissions config vars out of [Startup] into [Permissions]. Backwards compatible ([Startup] still being looked up), but please update your configs sometime soon.
2013-03-01 15:24:22 -08:00
efa7227865
Removed more vars from [Startup]. I think these were already moved elsewhere, because I can't find any reference to them in the code.
2013-03-01 14:18:01 -08:00
9e0c678c1e
Robust.HG.ini.example updated to get an [Hypergrid] section too.
2013-02-28 06:24:09 -08:00
64b8ce73da
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-02-27 20:50:03 -08:00
f1010d7b15
Moved the HG default variables out of [Startup] and into their own section [Hypergrid] in *Common.ini.example. Backwards compatible for now.
2013-02-27 20:49:41 -08:00
1bef19b914
Do not have the Freeswitch connector on by default in Robust ini example files.
...
This is not widely used (may even be currently broken), only allows very poor quality voice (not the fault of FreeSwitch)
and requires a complicated Freeswitch setup.
Having it on but not configured results in spurious warnings in the logs
2013-02-27 21:45:31 +00:00
20760fde25
Improve description of GenerateMapTiles config option
2013-02-27 00:31:54 +00:00
917c1695a1
Add documentation on default or Warp3D image module choice to OpenSim.ini.example.
...
As before, default is MapImageModule.
Thanks to Ai Austin for pointing out this omission.
2013-02-27 00:27:21 +00:00
d0cb4fc326
Move map related settings from [Startup] to a new [Map] section in OpenSim.ini
...
Existing map settings in [Startup] will continue to work, and if present will override anything in [Map]
However, the proper place for such settings would now be [Map]
This is to reduce the use of [Startup] as a bag for non-generic settings which should really go in sections, in common with other settings.
This commit also extends Diva's previous work to allow a default setting to be given when looking at multiple sections for settings.
2013-02-25 23:04:38 +00:00
53470d5057
Missing var in [LoginService] for HG Robust.
2013-02-25 10:25:36 -08:00
6a01683aeb
More clarification on the [Groups] section
2013-02-23 11:24:11 -08:00
a0161e7161
Further clarification on the same spot.
2013-02-23 11:21:14 -08:00
c72c238f5d
Improved documentation of Groups section.
2013-02-23 11:16:50 -08:00
0d08f81421
Err.. wrong dll name for groups in Robust.HG.ini.example
2013-02-21 19:07:39 -08:00
0e5859d2b4
Minor formatting cleanup. No changes.
2013-02-21 17:26:37 -08:00
e515cdddec
Simplification of HG configs: HomeURI and GatekeeperURI now are defined as default under [Startup]. They can then be overwritten in the other sections (but probably shouldn't). I kept the existing code for backwards compatibility, so this should not cause any breaks from people's current configurations. But people should move to have these 2 vars under [Startup] -- see OpenSim.ini.example and Robust.HG.ini.example. And yes, both names now end with "URI" for consistency.
2013-02-21 17:26:19 -08:00
db2b3627f2
Add information about MinLoginLevel to example ini files
2013-02-20 00:48:02 +00:00
fc89987656
Previous build failed. Checking in a dummy change to see if the fail persists.
2013-02-19 07:30:55 -08:00
9380d01976
First commit of Diva Groups. The Data bits went to OpenSim.Data core, the rest to Addons.Groups.dll.
2013-02-19 07:26:40 -08:00
46e182dbf5
Offline IM: moved the Data and MySQL bits to the corresponding places in core, so that it will be easier to plugin a SQLite backend, if anyone is interested in doing that.
2013-02-19 06:37:20 -08:00
5e709b087c
Donating Diva OfflineIM as an addon in a single dll, OpenSim.Addons.OpenSim.dll
2013-02-18 15:44:00 -08:00
1d7276235a
BulletSim: add calls for creating all the different Bullet constraint types.
...
Updated the DLLs and SOs and code for BulletXNA to create the types.
All the detailed control calls are not all in place yet.
2013-02-17 20:13:49 -08:00
0194a3d890
BulletSim: fix density since the simulator/viewer track density in a
...
funny unit that is 100 times real density (default 1000).
Fix avatar drifting slowly when stationary flying.
Fix for physical prims getting corrected for being under terrain when it was
just its geometric center that was below terrain.
Add PreUpdatePropertyAction allowing plugable modifiction of phys
parameters returned from Bullet.
Fix an exception setting GravityMultiplier on initialization.
Update DLLs and SOs for good measure (no functional change).
2013-02-12 15:52:10 -08:00
aaa80d11a8
Replaced Ionic.Zip.dll with a new one that fixes a bug in it. DotNetZip (from which Ionic.Zip.dll is derived) is now a fork in opensim-libs, forked from 1.9.1.8 and added that simple bug fix.
2013-02-12 14:47:26 -08:00
4808b8ee38
BulletSim: add parameter to set global contact breaking threshold. Update DLLs and SOs for setting same.
2013-02-08 16:29:52 -08:00
e93defd0ca
Adds size limits to JsonStore. Adds a separate configuration
...
variable to enable binding to dynamic attributes.
2013-02-08 15:07:43 -08:00
94a5232d3a
* Adds Websocket support to baseHttpServer and IHttpServer.cs . This allows modules to set up a websocket server that websocket clients can connect to. An example module is in OptionalModules/Example/WebSocketEchoTest/WebSocketEchoModule.cs
2013-02-07 10:50:17 -05:00
4867a7cbbf
This is the final commit that enables the Websocket handler
2013-02-07 10:27:18 -05:00
07a7ec4d1b
minor: Add explanation of MaptileStaticUUID setting in Regions.ini.example
2013-02-06 02:40:32 +00:00
3646361279
BulletSim: make removing zero width triangles from meshes optional
...
and, for the moment, default to 'off'.
2013-02-05 17:19:55 -08:00
dce9e323f4
BulletSim: remove degenerate triangles from meshes. This fixes the
...
invisible barriers in sculptie doorways (Mantis 6529).
Bump up level-of-detail for physical meshes to 32 (the max). This
fixes the invisible barriers that showed up in prim cut arches.
NOTE: the default LOD values are removed from OpenSimDefaults.ini.
If you don't change your OpenSimDefaults.ini, you will continue
to see the arch problem.
2013-02-05 16:56:33 -08:00
ad438ee59f
BulletSim: rework some parameter setting implementation moving functionality that was in BSScene to BSParam. Remove unused parameters that were passed to the unmanaged code. Update DLLs and SOs for the new param block.
2013-02-05 16:56:23 -08:00
1dc09d8e8f
We're not really done here.. but we're getting there. Socket Read is working.. Still have to do Header.ToBytes and compose a websocket frame with a payload.
2013-02-05 18:02:25 -05:00
80d9b336ff
Remove [XMLRPC] section I added by accident to the top of OpenSimDefaults.ini in previous commit 95883282
2013-02-04 07:08:48 +00:00
Robert Adams