c877e73463
Comment out log message about sending periodic appearance updates.
2012-03-30 02:33:26 +01:00
3ce5e8eb6c
Add information about SendPeriodicAppearanceUpdates to OpenSimDefaults.ini for now.
...
Default remains false.
2012-03-30 02:33:18 +01:00
e6b12e1f9d
Add experimental SendPeriodicAppearanceUpdates = true/false setting to [Startup] in OpenSim.ini
...
On osgrid and other places, I have observed that manually sending appearance updates from the console often relieves grey avatar syndrome.
Despite hunting high and low, I haven't been able to find where this packet is sometimes being lost - it might be a persistent viewer bug for all I know.
Therefore, this experimental setting resends appearance data for everybody in the scene every 60 seconds. These packets are small and the viewer only fetches texture
data if it doesn't already have it.
Default is false.
2012-03-30 02:33:10 +01:00
bfbbd4ccba
Add a scene maintenance thread in parallel to the heartbeat thread. The maintenance thread will end up running regular jobs that don't need to be in the main scene loop.
...
The idea is to make the critical main scene loop as skinny as possible - it doesn't need to run things that aren't time critical and don't depend on update ordering.
This will be done gradually over time to try and uncover any issues. Many non-criticial scene loop activities are being launched on separate threadpool threads anyway.
This may also allow modules to register their own maintenance jobs without having to maintain their own timers and threads.
Currently the maintenance loop runs once a second, as opposed to the 89ms scene loop.
2012-03-30 02:33:01 +01:00
fec7016665
Remove unnecessary shutting down check in Scene.Heartbeat(). Add some method doc. Rename HeartbeatThread, shuttingdown to conform to code standards.
2012-03-30 02:32:53 +01:00
47fe6170b2
Rename Scene.StartTimer() to Start() - this method no longer uses a timer. Comment out more effectively unused old heartbeat code.
2012-03-30 02:32:34 +01:00
24b5fb8523
Add commented out section on collisions switch in Scene.SetSceneCoreDebug().
...
This was not implemented before the recent changes but should be at some point.
2012-03-30 02:24:03 +01:00
e8cd9688ce
If "debug scene updates true" then print out to log when a garbage collection occurs.
2012-03-30 02:23:27 +01:00
fa952f6d35
Add Scene.DebugUpdates switch which, if turned on, will print out a warning when a frame updates takes longer than twice the desired time
...
This is controlled via "debug scene updates true|false" on the region console.
Also fix an oversight with "debug scene teleport true|false"
2012-03-30 02:23:20 +01:00
df55fd69af
Incorporate scene teleporting debugging into "debug scene teleport true|false" command
2012-03-30 02:23:13 +01:00
019fc4c1f2
Replace "scene debug true false true" console command with "scene debug scripting true" or other parameters as appropriate.
...
This is to allow individual switching of scene debug settings and to provide flexibiltiy for additional settings.
2012-03-30 02:22:59 +01:00
22ea441feb
fix compile error from last commit
2012-03-30 02:22:57 +01:00
9f5b33e52e
refactor: simplify EstateManagementModule.handleEstateDebugRegionRequest()
2012-03-30 02:21:42 +01:00
92837c4f89
Add ability to log warn if a frame takes longer than twice the expected time. Currently commented out.
2012-03-30 02:21:32 +01:00
68ce06f40f
remove unnecessary tmpFrameMS, use maintc instead for frame time calculation
2012-03-30 02:21:04 +01:00
279b31c75b
Move frame loop entirely within Scene.Update() for better future performance analysis and stat accuracy.
...
Update() now accepts a frames parameter which can control the number of frames updated.
-1 will update until shutdown.
The watchdog updating moves above the maintc recalculation for any required sleep since it should be accounted for within the frame.
2012-03-30 02:20:46 +01:00
3117b3cd88
refactor: precalculate the fixed movement factor for avatar tilting (sqrt(2)) rather than doing it multiple times on every move.
2012-03-30 02:20:35 +01:00
9b547f76e7
refactor: Eliminate unnecessary duplicate avCapsuleTilted
2012-03-30 02:20:29 +01:00
3d6675784a
Remove pointless ThreadAbortException catching in a test that isn't run anyway.
2012-03-30 02:20:21 +01:00
26f50eadd1
Remove some pointless catching/throwing in the scene loop.
2012-03-30 02:20:14 +01:00
6e8496ffc5
Comment out unused scene loop restart code.
...
This has actually been unused since at least 0.7.2 due to earlier changes.
2012-03-30 02:18:13 +01:00
88d6c4ec0e
Use m_lastFrameTick instead of m_lastUpdate in Scene.GetHealth(). m_lastUpdate is no longer properly updated and is redundant anyway.
2012-03-30 02:18:05 +01:00
135eeb45d6
Change flavour to extended
2012-03-30 02:16:11 +01:00
54ee59c0bb
Add Extended flavour option to opensim version information.
...
This flavour is for changes in addition to the 0.7.3-post-fixes branch that are too large to be considered fixes but should be reasonably stable.
This flavour will almost certainly never see a formal release.
2012-03-30 02:13:37 +01:00
4a5c61a33d
Enable voice by default on parcels to weaken effects of viewer 2/3 ParcelVoiceInfoRequest bug
...
Viewer 2/3 contains a bug where the viewer will constantly retry ParcelVoiceInfoRequest requests on voice-disabled parcels where voice is otherwise available.
Attempts to fix this server-side have not been successful - sending a non-OK http code (e.g. a 404) just makes the viewer request again immediately.
Dropping the request entirely is a bit better but the viewer still retries after a minute.
Estate settings already enabled voice by default so doing the same for parcels. This only has an effect if you have any voice system active at all.
Ultimately, the re-request bug needs to be fixed viewer-side (LL suffers from the same issue!) but it might be worth implementing the drop request hack.
2012-03-30 02:03:52 +01:00
179c0f5f56
Merge branch '0.7.3-post-fixes' of ssh://opensimulator.org/var/git/opensim into 0.7.3-post-fixes
2012-03-22 20:36:01 -07:00
4dbf937707
Comment out login parameters debug output accidentally included with c4b2d24
2012-03-22 23:33:08 +00:00
9edb57e5e9
Comment out a terrain save-tile debugging message that accidentally crept in with c4b2d24
2012-03-22 23:17:54 +00:00
4d15ad63bf
refactor: simplify code for checks when part.OwnerID != destPart.OwnerID in MoveTaskInventoryItem()
2012-03-22 23:03:00 +00:00
4021709371
Fix llGiveInventory() so that it checks the destination part for AllowInventoryDrop, not the source.
...
This allows llAllowInventoryDrop() to work.
Regression test added for this case.
2012-03-22 23:02:49 +00:00
3c13f5c3aa
Add llGiveInventory() test from object to object where both objects are owned by the same user.
2012-03-22 23:02:35 +00:00
381517b451
Add prim name to "[MESH]: No recognized physics mesh..." log message
2012-03-22 23:01:39 +00:00
6ecf36d49c
Fix small typo
2012-03-22 22:47:03 +00:00
64eb4b8408
Fix crash where two scene loop threads could changes m_MeshToTriMeshMap at the same time.
...
Have to lock m_MeshToTriMeshMap as property is static and with more than one region two scene loops could try to manipulate at the same time.
2012-03-22 22:46:45 +00:00
318da3fdcd
Added new simple_build_permissions config to the .ini and .example files.
2012-03-22 14:34:46 -07:00
50c99fcda6
Change a false false to be truly true - or is this statement false?
...
Fixes perms boo-boo
2012-03-22 14:34:33 -07:00
321de1f263
Rework Diva's patch to simplify it
2012-03-22 14:34:19 -07:00
fa30ace67d
Fixed borkness with map search introduce by my last changes to it.
2012-03-20 17:49:05 -07:00
92baa79253
Add some doc about the EventManager.OnLoginsEnabled event.
2012-03-19 22:49:34 +00:00
e861b45313
Fix a bug where logins to standalones would fail if the RegionReady module was not active
...
Unfortunately, the OnLoginsEnabled event is currently only guaranteed to fire if the RegionReady module is active.
However, we can instantiate the AuthorizationService in the module RegionLoaded method since by this time all other modules will have been loaded
2012-03-19 22:49:14 +00:00
cf91ac68b6
Stop console command "xengine status" throwing an exception if there are no scripts in a region.
...
Addresses http://opensimulator.org/mantis/view.php?id=5940
2012-03-19 21:45:18 +00:00
d4aba13526
Clean up "save iar" help
2012-03-19 21:33:03 +00:00
d36c7c3782
minor: reuse threadpool count we just fetched instead of fetching it again
2012-03-19 21:32:50 +00:00
4385fcdeae
Add total scripts count to "show threads"
...
However, this returns 0 on Mono (at least on 2.6.7)! So not showing if it is zero.
2012-03-19 21:32:42 +00:00
04eb170624
refactor: separate out console and status report generation parts of XEngine
2012-03-19 21:32:34 +00:00
4803686078
Improve threadpool reporting to "show threads" console command (also gets printed out periodically)
2012-03-19 21:32:25 +00:00
20b0fda3bb
Add process working memory to "show stats" memory statistics.
...
This shows the actual amount of RAM being taken up by OpenSimulator (objects + vm overhead)
2012-03-19 21:32:16 +00:00
4e5f823595
In Top Scripts report, don't show scripts with no or less than 1 microsecond of execution time.
...
This is to make the report clearer and less confusing.
2012-03-19 21:32:02 +00:00
a74408d1d2
Aggregate script execution times by linksets rather than individual prims.
...
This is for the top scripts report.
2012-03-19 21:31:53 +00:00
8206537efd
Fix owner name display in "Top Colliders" and "Top Script" region reports.
2012-03-19 21:31:45 +00:00
Justin Clark-Casey (justincc)