130768b16a
Add "show object pos <start-coord> to <end-coord>" command to simulator console.
...
This allows you to display details of all objects in a given bounding box.
Values parts of the co-ord can be left out as appropriate (e.g. to get all objects between the ground and z=30.
See "help show object pos" for more details.
2012-10-05 03:52:42 +01:00
8cd1dc8d60
minor: Add missing license information from the top of IUserManagement
2012-10-05 02:07:28 +01:00
d87813a194
Finally fix build break by allowing UserManagementModule (which constructs a packet directly) to reference OpenSim.Region.ClientStack.LindenUDP.
...
This time I actually properly did a clean build
2012-10-05 02:02:19 +01:00
046113c137
Print number of objects found with "show object name" and "show part name" simulator console commands
2012-10-05 01:46:28 +01:00
03136df1a7
Forgot to actually remove the packetpool set code from scene.
2012-10-05 01:45:49 +01:00
7c7cdf3431
Read PacketPool config in LLUDPServer with other config params rather than in Scene.
...
This is to resolve previous build break.
This unnecessarily but harmlessly reads and sets the parameter multiple times - scene was doing the same thing.
2012-10-05 01:43:29 +01:00
4832ed6960
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-10-05 01:32:02 +01:00
f0178a6a41
refactor: Move OpenSim.Framework.PacketPool to OpenSim.Region.Clientstack.Linden.UDP
...
This is to allow it to use OpenSim.Framework.Monitoring in the future.
This is also a better location since the packet pool is linden udp specific
2012-10-05 01:12:56 +01:00
276fdbc1b3
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-10-04 15:33:17 -07:00
5b90f5bb17
One more abstraction for GridUser so that it can be overridden in a sub-class.
2012-10-04 15:32:49 -07:00
d98af79f77
Make the asset retrieval concurrency a config switch. The current value
...
of 30 is still hanging badly on some mono versions. The switch defaults to
30 to preserve current behavior.
2012-10-04 08:41:06 -07:00
b977f962fa
Allow default animation to be stopped to be replaced with another one.
...
Fixes Mantis #6327
2012-10-04 15:42:52 +01:00
aa52c8b20f
Output monitor data in response to console command on MainConsole.Instance rather than m_log
...
This should really be happening for all console commands (though many don't).
However, things might get difficult if both a console command and other code invoke the same paths.
2012-10-04 02:17:57 +01:00
3d36a6d55c
Add generic PercentageStat.
...
Not yet used.
2012-10-04 01:27:40 +01:00
e717398f6c
Add experimental "slow frames" stat, available in "show stats" and via the monitoring module.
...
This increments a SlowFrames counter if a frame takes over 120% of maximum time.
This commit also introduces a generic OpenSim.Framework.Monitoring.Stat which is available to any code that wants to register a statistic.
This is more granualar than asking objects to create their own reports.
At some point this will supersede earlier IMonitor and IAlert facilities in MonitoringModule which are only available to scene code.
2012-10-04 00:32:42 +01:00
a2ab3b88de
Soliciting for comments on smoothness of physics objects for this build.
...
This introduces expected contact point hints to the ODE Collider to better determine when to throttle updates as excessive. This /should/ smooth physics objects out again, however, I cannot know every configuration of OpenSimulator, so I'm requesting that testers please examine this change on their build.
Thanks!
2012-10-03 18:30:44 -04:00
b9baab5521
Fix the use of the wrong index when locating the assets associated
...
with wearables. The fact that this hasn't caused problems earlier
suggests either that no one is using multiple layers of wearables or
that this code is useless because the assets are coming in with the
wearables request.
2012-10-03 10:45:57 -07:00
653a98e891
Fix a viewer crash issue
...
Conflicts:
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
2012-10-03 17:39:13 +01:00
e56ef2720e
I propose that 0.5m/step change for linear velocity is too big of a change to control the reporting of a new angular velocity. I think that this could be here for one of two reasons, 1. vehicles and llMoveToTarget with axis lock, or 2. To attempt to make things look more stable in the physics scene then they really are, however, this also really affects the angular velocity reporting negatively causing things to spin wildly and jump back into place repeatedly. To compromise, if the prim is a vehicle or is being used as a motor target, the original functionality is still applied. If that's not the case, angular velocity is reported with a linear velocity of 0.02m/step. To be clear on the effect of the physical world... When you push things, there's still a lag time where you walk into the object but once the object is in motion, it begins to move as you would expect so results in slightly more realistic motion.
2012-10-03 02:30:23 -04:00
df3d1d1301
Minor Modification, switch /2 to 0.5f in ODEPrim.Velocity
2012-10-02 23:14:35 -04:00
a5b8359b8e
BulletSim: fix crash on load that showed up on 32bit Linux.
2012-10-02 17:04:33 -07:00
ca5c0814f4
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2012-10-02 23:02:53 +01:00
f1886c449c
Attempt to fix Mantis #6311 . Honor a destination folder if one is given
2012-10-02 23:02:01 +01:00
a1679517d3
correcting typo
2012-10-02 22:14:47 +01:00
f555febdb7
taking into account the recent introduction of implicit operators
2012-10-02 22:14:46 +01:00
ce7694c108
added perms checking, duplicated functionality to methods that do not require perms and have higher threat level
2012-10-02 22:14:46 +01:00
c677c04f10
fixing copypasta
2012-10-02 22:14:46 +01:00
35b7c80e0b
implementing osDropAttachment & osDropAttachmentAt
2012-10-02 22:14:46 +01:00
e81e19a3b4
string format arguments in wrong order
2012-10-02 22:11:40 +01:00
210f227fe6
BulletSim: Make parameter value defaults match what should be the default and what is in OpenSimDefaults.ini. Comment and debug printout changes.
2012-10-02 11:14:15 -07:00
ce47d0c454
BulletSim: Add ForcePosition and ForceOrientation to BSPhysObject and to its children of BSPrim and BSCharacter.
2012-10-02 11:14:09 -07:00
d8a786870b
BulletSim: Fix problem where box shapes were not being rebuilt if the shape type changed.
2012-10-02 11:14:03 -07:00
ce97ebdc88
BulletSim: Fix linkset problem where delayed manipulations of child objects was using the child shape address at call time rather than the one created at taint time.
2012-10-02 11:13:57 -07:00
b6b505163c
BulletSim: call ForcePosition and ForceOrientation in BSDynamics so there is no lag between what the vehicle code sees and what the physics engine is using.
2012-10-02 11:13:51 -07:00
1e5869dcf6
Add Flush() method to LogWriter. Also correct line endings to Linux form.
2012-10-02 11:13:45 -07:00
f2c78281ce
BulletSim: fix the FloatOnWater code so avatars can normally go underwater.
2012-10-02 11:13:39 -07:00
33617e09a1
BulletSim: impliment FloatOnWater OS function.
2012-10-02 11:13:32 -07:00
c1740a2903
Correct my name in CONTRIBUTORS.txt
2012-10-02 11:13:26 -07:00
5221f2421e
BulletSim: remove warnings for unused variables.
2012-10-02 11:13:20 -07:00
54ec8b197b
Add money event routing to the script engine.
2012-10-02 01:25:55 +01:00
14b659e550
Send money() events to the clicked prim. Reverting a change I made over a year ago.
2012-10-02 01:17:46 +01:00
402128bb53
Prevent the ExtraSettings code from crashing SQLite driven sims.
2012-10-02 00:51:38 +01:00
0b9bf236dd
On more virtual method
2012-10-01 15:55:24 -07:00
0938ea2e1e
Merge branch 'master' of /home/opensim/var/repo/opensim
...
Conflicts:
bin/OpenSim.ini.example
bin/OpenSimDefaults.ini
bin/openjpeg-dotnet-x86_64.dll
bin/openjpeg-dotnet.dll
2012-10-01 10:55:03 -04:00
503ce70f74
Allow setting connection limits, part 2
2012-09-30 16:31:23 +01:00
060d6fe8f4
Allow setting max connections for an endpoint
2012-09-30 16:30:16 +01:00
7cc89cdadc
Add using clause I missed
2012-09-30 15:57:49 +01:00
f8a4b61954
Allow up to 12 simultaneous connections to a given endpoint rather than 2
2012-09-30 15:49:51 +01:00
91a5c602e3
Revert "Added request.Proxy=null everywhere, as discussed in http://stackoverflow.com/questions/2519655/httpwebrequest-is-extremely-slow ."
...
But the patch is here, in case anyone wants to try it.
This reverts commit 531edd51d8
2012-09-30 07:48:03 -07:00
531edd51d8
Added request.Proxy=null everywhere, as discussed in http://stackoverflow.com/questions/2519655/httpwebrequest-is-extremely-slow .
...
Thanks R.Gunther (rigun@rigutech.nl ) https://lists.berlios.de/pipermail/opensim-users/2012-September/010986.html
2012-09-30 07:22:55 -07:00
Justin Clark-Casey (justincc)