c920ff9d1d
Merge branch 'master' into careminster-presence-refactor
2011-07-09 01:06:46 +01:00
2fbc98fa5c
Make MeshUploadFlagModule non-shared rather than shared (since each scene needs its own cap)
2011-07-07 23:37:23 +01:00
47cf9c8fe0
Merge branch 'master' into careminster-presence-refactor
2011-07-05 04:01:59 +01:00
bebc51a6e0
Make it possible to disable the file part of the flotsam asset cache
...
This matches the ability to disable the memory part
This is controlled through the FileCacheEnabled parameter in FlotsamCache.ini
Default is true, so existing installations are not affected.
Improved fcache command feedback when various caches are disabled.
Re-enabled test for flotsam cache with file caching disabled.
2011-07-04 22:51:47 +01:00
fba961c63f
Make default serverside_object_permissions = true since this better matches user expectations.
...
It also matches the default setting in the OpenSim.ini.example file
2011-07-01 23:06:46 +01:00
a9b7487fcb
improve and tidy up some config file comments
2011-06-30 22:36:41 +01:00
03feb50a72
minor: adjust some indentation and spacing in OpenSim.ini.example for consistency
2011-06-30 20:26:17 +01:00
5f927dc104
Merge branch 'master' into careminster-presence-refactor
2011-06-30 00:26:03 +01:00
e11c959400
[PATCH] Changed Wind parameters default value in OpenSim.ini.example
...
according to implementation
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-06-28 11:48:28 -04:00
698cd0b3c2
Remove the now unused [cms] section from OpenSimDefaults.ini
2011-06-25 01:33:09 +01:00
0dd3281caf
Optionally, don't delete previously compiled scripts on startup
2011-06-24 22:07:20 +01:00
de20f0603f
Tell hypergridders when their teleports fail because of the 4096 limit rather than just saying "destination not found"
...
Instead of performing the 4096 check when the region is linked (and subsequently removing the link), leave the link in place and perform the check in the entity transfer module
This allows us to explicitly tell the hypergridder why the teleport failed (region out of range).
It also allows people on regions that are within range (on a large source grid) to teleport.
The Check4096 config parameter in the [GridService] section is replaced by a max_distance paramter in a new [EntityTransfer] section in OpenSimDefaults.ini
Since the parameter is in OpenSimDefaults.ini no action needs to be taken unless you want to increase this limit. It could also be decreased.
The check is being made in the base entity transfer module, since I believe the viewer problem occurs both on extremely large grids and while hypergridding.
2011-06-24 19:49:05 +01:00
6ae73aea49
Merge branch 'master' into careminster-presence-refactor
2011-06-20 03:11:34 +01:00
bbe489e64a
Added missing config var for map image service.
2011-06-15 11:11:14 -07:00
822b9e085f
Added SimulatorFeatures capability. Thanks Aurora devs for the bootstrap on the contents of the response.
...
Changed the experimental capability introduced a couple of commits ago: now sending that extra information as part of the response in the SimulatorFeatures cap.
2011-06-13 10:21:29 -07:00
ecb28ae130
V2 map now working in grids too. WARNING: A few visible configuration variables added in order for this to work. See .ini.example changes
2011-06-13 09:13:44 -07:00
0e4db3ca39
Added experimental new capability URL called MapImageService meant to work with Kokua viewer if devs are willing to do it.
2011-06-13 07:56:52 -07:00
9b1d3f0c38
Merge branch 'master' into careminster-presence-refactor
2011-06-13 12:38:17 +01:00
07d7c1cd2d
Trailing / in MapTileURL must be there!
2011-06-12 18:29:44 -07:00
fd57c91b4a
First pass at making the V2 map work. Standalones only for now. There are some issues with the zoom level -- TBD.
2011-06-12 15:37:42 -07:00
a1c16a4200
Merge branch 'master' into careminster-presence-refactor
2011-06-11 12:08:02 +01:00
39e878eb8f
Align CenomeCache.ini.example values with CenomeCache defaults.
2011-06-11 00:35:31 +01:00
c7cef650db
Make it clear that WaitOnInprogressTimeout is currently a dead setting in FlotsamCache.ini.example
2011-06-11 00:10:40 +01:00
b13b54c526
Make the internal flotsam asset cache defaults match config-include/FlotsamCache.ini.example. Enable the flotsam console commands even if FlotsamCache.ini isn't present.
...
For the most part, defaults are made to match those already in FlotsamCache.ini.example.
The one exception is that the 48 hour file timeout from the code is used instead of the 0 hours that was in the example file. This can be tweaked if necessary.
Most importantly, the default cache directory is now ./assetcache (as in FlotsamCache.ini.example) rather than ./FlotsamAssetCache (as was the internal code default).
Therefore, if you were using flotasm without using the config file, then please rename your cache directory or start using the ini file and change the default there if you want to keep using your existing cache.
2011-06-11 00:04:21 +01:00
c7bdb66a1f
Added missing "Old Guids=true" to ConnectionString
2011-06-10 21:10:37 +01:00
326c46ba70
Merge branch 'master' into careminster-presence-refactor
2011-06-09 02:05:04 +01:00
f5d82350bb
This fixes the crash reported in http://opensimulator.org/mantis/view.php?id=5529 related to sending IMs to foreign friends who are offline. Hopefully.
2011-06-07 10:51:12 -07:00
e77ca65e57
This should make offline IMs work again. It should work for incoming foreign IMs where the local recipient is offline. I can't test any of this, because I don't run an offline IM server.
2011-06-06 17:46:34 -07:00
4ea89f39f2
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-03 10:32:21 -07:00
7772640ae8
.ini.example's updated for HG Landmarks
2011-06-03 10:29:59 -07:00
dfa4442319
Move the "!!!Standalone Only!!!" [FreeswitchService] section from OpenSim.ini.example to config/StandaloneCommon.ini.example where it belongs.
2011-06-02 22:43:44 +01:00
b8e2ee6978
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-02 21:48:50 +01:00
b000d4f67f
minor: add ini.example doc to hint that the server address in [FreeswitchService] must be reachable by viewers
2011-06-02 21:37:17 +01:00
46cdd442a8
[Profiles] --> [Profile]
2011-06-01 18:18:31 -07:00
c4b265aeae
update libomv libraries to 0.9.0
...
this is a prerequisite to fixing llDialog issues for the latest Linden viewers, since they are now making use of a new OwnerData field in the ScriptDialog message
2011-05-31 18:47:13 +01:00
7ea6dfecd9
Adding MSSQL connectionString example
2011-05-30 23:22:52 +01:00
d671dbb7c7
Removing mssql_connection.ini.example - mssql_connection.ini is no longer used
2011-05-30 23:22:49 +01:00
16fae059bb
Comment the alert_uri so it remains disabled until set
2011-05-28 16:40:05 -04:00
3326e417b4
Merge branch 'master' of /home/opensim/src/opensim
2011-05-28 16:21:30 -04:00
c7e18f9017
Adding an event to signal that logins are enabled
...
Added an event to signal the eabling of logins and added an alert to send to a configured service.
2011-05-28 16:20:10 -04:00
d2c2a4301b
Merge branch 'master' of /home/opensim/src/opensim
2011-05-28 00:39:21 -04:00
99f42c0a6e
Add option to disable logins
...
This just covers script loading for now. More to come.
2011-05-28 00:35:06 -04:00
44d5821c4e
Fixed one comment in a config file.
2011-05-27 13:35:22 -07:00
76525be7b2
HG lures working! Friends can offer friends HG teleports via the profile. WARNING: additional configuration for HG inis -- see *Common.ini.example
2011-05-27 13:07:18 -07:00
36f9d55c36
Added a BasicProfilemodule so that the profile-based actions (like give inventory, etc) work. This is just a mock profile, the same for all users, and with no DB backend behind it -- meaning that nothing will be saved. For serious profiles, use 3rd party implementations.
2011-05-27 07:00:36 -07:00
31d07859f9
Added missing config vars to StandaloneCommon.ini.example and fixed the ones in Robust.HG.ini.example
2011-05-26 19:43:24 -07:00
abae859e7a
Added missing configuration variables to Robust.HG.ini.example
2011-05-26 19:20:29 -07:00
07acb4d321
Last commit before pushing. WARNING: (a) DB migration on the friends table; and (b) several config additions related to HG. See Robust.HG.ini.example, GridCommon.ini.example and/or StandaloneCommon.ini.example.
2011-05-26 19:15:39 -07:00
0c58a9e680
HG IM in grid mode working fairly well. Unknown target user references looked back in source user's User Agent service.
2011-05-26 10:04:48 -07:00
5c2168cae7
HG: Instant Message working. Tested on HG standalones only. Needs a lot more testing.
2011-05-25 12:32:21 -07:00
root