35457448ca
If a script is being stopped manually, then give the scriptpool thread 1 second to finish normally before forcibly aborting.
...
This is to avoid the worst of the problems in mono 2.6, 2.10 where an aborted thread does not always release all its locks.
This very short grace period is identical to the existing behaviour when a script is removed from the scene.
2012-07-11 23:14:30 +01:00
596caf41db
This script allows an object to be attached directly from prim inventory to another avatar in the scene.
...
Very useful in serious game/environment scenarios where its only allowed for trusted creators.
Threat level Severe
2012-07-11 23:14:14 +01:00
c62b46a167
Don't allow a prim to be sat upon if its part of an attachment
2012-07-11 23:14:04 +01:00
2b3098f011
Do not allow a script to attach a prim if its being sat upon.
...
This prevents a stack overflow where a get position on the avatar will refer to the attachment which will in turn refer back to the avatar.
This required recording of all sitting avatars on a prim which is done separately from recording the sit target avatar.
Recording HashSet is null if there are no sitting avatars in order to save memory.
2012-07-11 23:13:48 +01:00
74b4efd7f9
minor: remove some recent mono compiler warnings
2012-07-11 23:07:17 +01:00
298c4c0eb5
Remove duplicate Warp3DImageModule entry in CoreModulePlugin.addin.xml
...
This was causing 2 copies of the module to be created for each scene.
Probably no bad consequences other than a small waste of memory (both for the module and for the warp3D renderer it loaded)
2012-07-11 23:07:09 +01:00
068917bc29
Remove redundant SetScene() function in Scene.AddSceneObject()
...
This is always done later on in SceneGraph.AddSceneObject() if the call hasn't failed due to sanity checks.
There's no other purpose for this method to exist and it's dangerous/pointless to call in other conditions.
2012-07-11 23:06:41 +01:00
d8f1d2892c
Remove now duplicate interregion object check that should have been removed a few commits ago in 43a2da9
2012-07-11 23:06:30 +01:00
ccf8e89193
minor: Remove some wrong comments in attachments regression tests
2012-07-11 23:06:23 +01:00
f17f58ac2a
Add assert to attachment regression tests to check that number of objects in the scene graph
2012-07-11 23:06:14 +01:00
6bcb5baab6
Pull prim crossing/teleport checks up into Scene.IncomingCreateObject() from Scene.AddObject()
...
Only IncomingCreateObject() needs these checks. General object adding does not need to perform crossing perm checks
2012-07-11 23:05:59 +01:00
0aaf935333
refactor: extract method UpdateUserInventoryWithAttachment() from AttachObject() for better code comprehension
2012-07-11 23:05:53 +01:00
b30806822e
Log MONO_THREADS_PER_CPU value on simulator startup, or "unset" if it is not set
2012-07-11 23:05:43 +01:00
a2c3dfc422
Log warning if time between invocations of the watchdog thread is twice the timer setting.
...
This is to help detect situations where thread timeout warnings are being generated because of general machine issues rather than deadlock, network or other problems.
2012-07-11 23:05:34 +01:00
4050a6f8bb
minor: add client name to various login service log messages to disambiguate messages from concurrent logins. Also adds destination resolution debug log message showing region endpoint.
...
Adding endpoint to the log helps to find issues where the region external host information has been wrongly configured
2012-07-11 23:05:26 +01:00
0d0d04c484
minor: Add more information to OSFunctionThreatLevel and clarify some text in using PARCEL_OWNER, PARCEL_GROUP_MEMBER, ESTATE_MANAGER, ESTATE_OWNER permission categories
2012-07-11 23:05:09 +01:00
952b3448a6
porting console commands from raw2sculpt 3.2
2012-07-11 23:05:01 +01:00
d53ef3b302
Add OSSL function osForceAttachToAvatarFromInventory()
...
This works like osForceAttachToAvatar() but allows an object to be directly specified from the script object's inventory rather than forcing it to be rezzed in the scene first.
Still only attaches objects to the owner of the script.
This allows one to bypass the complicated co-ordination of first rezzing objects in the scene before attaching them.
Threat level high.
2012-07-11 23:04:49 +01:00
48e88397a0
Use GetInventoryItem() in llRezAtRoot rather than iterating through a cloned dictionary
2012-07-11 23:04:42 +01:00
976190fe96
refactor: In llGetNotecardLine() use existing GetInventoryItem() rather than inspecting a clone of the TaskInventory dictionary that was not cloned thread-safe
2012-07-11 23:04:34 +01:00
1e025d6074
refactor: In llGetNumberOfNotecardLines() use existing GetInventoryItem() rather than inspecting a clone of the TaskInventory dictionary that was not cloned thread-safe
2012-07-11 23:04:27 +01:00
fffd2fe10d
refactor: use existing GetInventoryItem() in GetScriptByName(), itself renamed from ScriptByName()
2012-07-11 23:01:41 +01:00
cf8adbe007
refactor: In llGetInventoryType() use existing GetInventoryItem()
2012-07-11 23:01:33 +01:00
890f617e58
refactor: In llGetInventoryCreator() use existing GetInventoryItem()
2012-07-11 23:01:27 +01:00
6ff0e58db7
refactor: In llGetInventoryPermMask() use existing GetInventoryItem()
2012-07-11 23:00:57 +01:00
795443cff1
refactor: in llGetInventoryPermMask use existing GetInventoryItem()
2012-07-11 23:00:50 +01:00
8c7f511e55
refactor: In llRemoteLoadScriptPin() use existing GetInventoryItem()
2012-07-11 23:00:43 +01:00
0acac2f890
refactor: replace use of LSL_Api.GetTaskInventoryItem() with existing GetInventoryItem()
2012-07-11 23:00:36 +01:00
72554fc5b8
refactor: In llGetInventoryKey() use existing GetInventoryItem()
2012-07-11 23:00:28 +01:00
aa1442b07e
In llMessageLinked() use GetInventoryItems() rather than cloning TaskInventory directory
...
GetInventoryItems() returns a new list and so is equivalent, and creates this list under lock whereas Clone() is not thread-safe
2012-07-11 23:00:21 +01:00
e8a0ec1287
In llRequestInventoryData() use GetInventoryItems() rather than cloning TaskInventory directory
...
GetInventoryItems() returns a new list and so is equivalent, and creates this list under lock whereas Clone() is not thread-safe
2012-07-11 23:00:13 +01:00
3436be2046
refactor: In llCollisionSound() use existing GetInventoryItem() method rather than have it iterate through TaskInventory itself.
2012-07-11 23:00:07 +01:00
9a0bcb7750
refactor: In llRemoveInventory() use existing GetInventoryItem() method rather than have it iterate through TaskInventory itself.
2012-07-11 22:59:59 +01:00
218fe36f84
refactor: make llGiveInventory() use existing GetInventoryItem() method rather than iterate through TaskInventory itself.
2012-07-11 22:59:53 +01:00
07298c8b4f
refactor: rename Watchdog.WATCHDOG_TIMEOUT_MS to DEFAULT_WATCHDOG_TIMEOUT_MS to reflect what it actually is
2012-07-11 22:59:46 +01:00
d9f40d1ebc
minor: Add some method doc to HasGroupChanged and Schedule GroupForFull/PartUpdate() to indicate when region modules need to invoke them
2012-07-11 22:59:39 +01:00
eddff428ed
Removing unused handling of incoming create object by userID and itemID only.
...
It appears this was never actually used since attachments were rezzed in other code.
This was never available on remote simulator comms, only local.
2012-07-11 22:58:57 +01:00
61aaa10460
Remove code listed for removal in 0.7.3 that handled script restart for incoming attachments from pre-fatpack regions (versions of OpenSimulator more than a year old)
2012-07-11 22:58:50 +01:00
e1d6929e61
Move update of the final optional ODE total frame stat inside the OdeLock rather than outside to avoid a very occasional race condition with the stat collection thread
2012-07-11 22:58:37 +01:00
6b87873aa7
refactor: rename _collisionEventPrim to m_collisionEventActors and _collisionEventPrimChanges to m_collisionEventActorsChanges to reflect their actual contents.
...
These dictionaries handle all actor types, not just physical prims.
2012-07-11 22:58:29 +01:00
f690acbfb6
Fix a regression where we stopped removing avatars from collision event reporting on logout, rather than stopping clearing their collision events.
...
This occurred in b18c8c8
2012-07-11 22:58:09 +01:00
f49c850269
If a link points to a non-existing item in FetchInventory caps, then don't try to add it to the return data rather than suffering an exception later on
2012-07-11 22:58:01 +01:00
70f85af75b
Add IScene.Name for code clarity to replace the RegionInfo.RegionName used in many, many log messages.
2012-07-11 22:57:53 +01:00
663b0cc681
Change AttachmentsModule.DetachSingleAttachmentToInv() to accept a SOG directly instead of an item ID to then shuffle through attachments, saving CPU busywork.
...
Almost all callers already had the sog to hand.
Still checking that it's really an attachment, but now by inspecting SOG.AttachedAvatar
2012-07-11 22:57:39 +01:00
733a8c9f89
Rather than iterating through all SOGs in the scene looking for the one that matches out fromItemID on detach, go through the agent's attachment sog list instead.
2012-07-11 22:57:31 +01:00
25109c8e4d
Remove code that tried to delete an attachment back to inventory if RezSingleAttachmentFromInventoryInternal() returned null.
...
null would only ever be returned if the item couldn't be located within inventory and this would happen immediately.
In this case, derezzing wouldn't work anyway since there is no item to derez.
2012-07-11 22:57:22 +01:00
51724128bf
If rest of first line after colon is blank then still warn about running in XEngine if engine specified does not exist.
...
This is to take account of situations where the user was intending to specify a script engine using colon using its default language.
This probably generates few false positive as scripts are less likely to end a first line colon with a comment for other purposes.
2012-07-11 22:57:12 +01:00
461831a65e
Avoid reporting false positives when a colon is in a comment in the first line of a script where the user was not trying to select a different script engine.
...
This works by only posting the "Selected engine unavailable" message if we're falling back on XEngine and the language is one handled by XEngine.
In cases where the language is not handled or not allowed, the user will still be notified by the later compiler error.
This avoids the overwhelming majority of false positives where the first line contains a : for other reasons (e.g. source control systems, vim settings, etc.)
Ultimately, I think it would be better to detect script language/engine with a mechanism that didn't just rely on : detection (e.g like #! in unix scripts).
2012-07-11 22:56:59 +01:00
c6fa09c3af
minor: reuse colon index calculation in XEngine.OnRezScript. The index if a colon is found on the first line will always be the same as for the whole script.
2012-07-11 22:56:45 +01:00
9ccf56eaae
Fix issue in InventoryArchiveTestCase where it didn't call down to OpenSimTestCase.SetUp()
2012-06-27 21:52:23 +01:00
Justin Clark-Casey (justincc)