* Add zero length blocks to the new packet blocks to remain compatible with older viewers and avoid a NullRef when _packets_.cs calls the Length parameter.. which adds up the Length property all of the blocks.
This change also corrects the setting names - they were actually wrong (though the text in {} was correct).
If there are settings in [Startup] they will continue to be used and anything there will override settings in [AccessControl]
This is not widely used (may even be currently broken), only allows very poor quality voice (not the fault of FreeSwitch)
and requires a complicated Freeswitch setup.
Having it on but not configured results in spurious warnings in the logs
Existing map settings in [Startup] will continue to work, and if present will override anything in [Map]
However, the proper place for such settings would now be [Map]
This is to reduce the use of [Startup] as a bag for non-generic settings which should really go in sections, in common with other settings.
This commit also extends Diva's previous work to allow a default setting to be given when looking at multiple sections for settings.
funny unit that is 100 times real density (default 1000).
Fix avatar drifting slowly when stationary flying.
Fix for physical prims getting corrected for being under terrain when it was
just its geometric center that was below terrain.
Add PreUpdatePropertyAction allowing plugable modifiction of phys
parameters returned from Bullet.
Fix an exception setting GravityMultiplier on initialization.
Update DLLs and SOs for good measure (no functional change).
invisible barriers in sculptie doorways (Mantis 6529).
Bump up level-of-detail for physical meshes to 32 (the max). This
fixes the invisible barriers that showed up in prim cut arches.
NOTE: the default LOD values are removed from OpenSimDefaults.ini.
If you don't change your OpenSimDefaults.ini, you will continue
to see the arch problem.
on a moving object.
Rearrange pre/post action subscription code to put more in locks.
Add meshmerizer params to BulletSimTestUtil scene creation (and fix line endings).
Rebuilt version of DLLs and SOs with cleaned up code and no profiling for sure.
to the fetch URL to return the data in JSON format. Also adds a simple
'sim.html' that uses JavaScript to display the JSON data. Not pretty
but an example.
* The only thing that had an issue was when creating a new RigidBody, BulletXNA didn't know the type SimMotionState and the upcast type is unknown in the constructor. Therefore, I had to update the IMotionState with a new method 'SetBody'. All of the duplicated type information has been removed and BulletXNA is not relying on any non-standard types external to the library.
This setting controls whether scripts are stopped by aborting their threads externally (abort) or by co-operative checks from the compiled script (co-op)
co-op should be more stable but this option is experimental.
If moving from co-op to abort, existing script DLLs will need to be recompiled.
This currently can only be done manually, either by setting DeleteScriptsOnStartup = true for one run
or by deleting the script DLL* files in bin/ScriptEngines/<region-id>/
One can move from co-op back to abort without recompilation, but reverting back to co-op again will need script recompile
Necessitated allowing simulator and physical position of a body to
get out of sync since Bullet assumes that <0,0,0> is the center of mass.
Update DLLs and SOs for the UpdateChildTransform so positions of
individual prim in a linkset can be implemented.
Default is 1000, as has previously been the case.
This parameter exists for further debug work concerning mono 2.10 crashes that may be related to locks not being removed on Thread.Abort
static objects by more restrictive selection of objects that collide
with static objects.
Rename collision mask fuctions from 'filter' to 'group' so it is clear
what is being set.
Rename BulletSimAPI.SetCollisionFilterMask() to SetCollisionGroupMask to match above.
Restore passing of time step to linear and angular motion component routines.
Use buffering vehicle physical parameter get/set routines consistantly.
Make range enforcement clearer by using ClampInRange() function for parameter setting.
Remove commented out experimental vehicle calculations.
This reduces base memory churn of every client connection, improving the garbage collection situation.
The effect is a significant portion of base load (an avatar standing still on a completely blank island)
but will probably still be swallowed up by other memory use on active regions.
Tests have shown no noticeable impact on speed of processing incoming packets, though setting remains
in case a switch back is needed.
Setting this to false will block all restart requests from the viewer even if they are otherwise legitimate.
One use is to block region restarts if necessary whilst restart functionality remains buggy or triggers bugs in modules,
though these should be fixed as soon as practicable.
Default is true, as has been the case historically.
Simple attempt to make avatars better shaped.
Replace parameter 'avatarCapsuleRadius' with 'avatarCapsuleWidth'
and 'avatarCapsuleDepth'.
More tweeking to avatar height calculation. A little better but
short avatar's feet are above the terrain and tall avatar's feet
are a little below the ground.
nant_0.91~alpha2+dfsg-3_all.deb in Ubuntu 12.04 and earlier actually ignored these due to a bug
However, nant 0.92~rc1+dfsg-2 in Ubuntu 12.10 fixes this bug (possibly https://github.com/nant/nant/pull/39).
Which makes nant time-consumingly copy these files when the aren't actually used.
Tested removal of <copy> on both nant 0.91 and nant 0.92
Will be submitting this patch to prebuild project for comment though I suspect there's nobody there to pay attention.
This allows a closed grid to delete asset types other than maptile remotely.
Only operational if AllowRemoteDelete = true also.
Defaults to false - do not enable if anybody other than you can make asset service requests.
This is because macosx mono is 32-bit and this can't p/invoke 64-bit binaries.
However, the reverse is also true.
If OpenSimulator stops working for you then please complain! Long term alternative is probably to build a fat binary with both architectures.
This retrieves and caches information from the PresenceService to only send messages to online users.
This is reported to much improve performance for large groups where most users are offline.
Cache is 20 seconds to balance requests against users not receiving messages until cache updates.
This is an alternative to an approach where login/logout notification is sent directly from simulator to groups service.
However, I'm not convinced that this PresenceService approach is actually better. Needs more thought.
Even when an avatar is standing still, it's sending in a constant stream of AgentUpdate packets that the client creates new UDPPacketBuffer objects to handle.
This option pools those objects. This reduces memory churn.
Currently off by default. Works but the scope can be expanded.
We can provide modular ini for connectors...
look for our configuration in the following places...
1) in the default ini/-inifile
2) in the named file (ConfigName) located in the configured directory
(see Robust[.HG].ini [Start] section for ConfigDirectory)
3) in the repository named in the connector (ConfigURL)
In this case, the file will be written into the configured
directory with the specified
See example connector/service @ https://github.com/BlueWall/SlipStream
for testing.
Rearrangement and cleanup of shape collection code. Much more readable.
Enabling and use of collision filters and masks.
Addition of ID to body creation BulletSimAPI calls so always set in
shape for collision reporting.
Change default of ShouldSplitSimulationIslands and ShouldRandomizeSolverOrder
from 'false' to 'true'. When 'false', this suppresses NO_CONTACT_RESPONSE
which makes volume detect fail.
This controls how many undo steps the simulator will store for each prim.
Default is now 20 rather than 5 as it briefly was.
The default number could be increased through this is a memory tradeoff which will scale with the number of prims in the sim and level of activity.
This resends appearance uuids to avatars in the scene once a minute.
I have seen this help in the past resolve grey appearance problems where viewers have for unknown reasons sometimes ignored the packet.
The overhead is very small since only the UUIDs are sent - the viewer then requests the texture only if it does not have it cached.
This setting will not help with cloudy avatars which are usually due to the viewer not uploading baked texture data or uploading something that isn't valid JPEG2000
This is because libopenjpeg 1.5 appears to require a minimum of glibc 2.14, whereas at least one fairly recent distro (openSUSE 11.4 from 2011-03-10) only has glibc
Further investigation pending.
Among other things this allows pCampbot to work under Windows since libopenmateverse now ships the same log4net.dll (publicly signed) as OpenSimulator
This also updates the libopenmetaverse embedded libopenjpeg from 1.3 to 1.5.
DLL naming and mapping for non-Windows libopenjpeg changes to remove version number to make future udpates easier and bring it into line with names of other shipped DLLs.
libopenjpeg updates have been made for OSX, Windows (32 and 64 bit) and Linux (32 and 64 bit). Please report any issues.
Fix inconsistencies between configuration parameter names and their description names. Changing the configuration parameters for non physical prim size min-max from Nonphys* to NonPhys*.
Please update your OpenSim.ini and Regions.ini to reflect these changes.
This is to resolve a problem where an asset marked as local but not temporary but still used in the scene would be removed.
The timed expiry scan no longer tries to refetch assets from the scene that are not currently in the cache - this is not helpful since it just drags a lot of data into the cache that may never be referenced.
This removes the DeepScanBeforePurge option since setting this to false will introduce the above problem. This previously had a default of true.
teravus