Commit Graph

72 Commits (aeb4ff02744573cb91e8991bf9df81412b80e156)

Author SHA1 Message Date
Justin Clark-Casey (justincc) 3843efe478 Restore [Startup] physical_prim flag which can stop any prims being subject to physics
This had stopped working.  However, at the moment it still allows the physics flag to be set even though this has no effect.  This needs to be fixed.
Default for this flag is true as previously.
2011-10-15 02:42:43 +01:00
Justin Clark-Casey (justincc) 03102864f0 change default ODE world_stepsize to 0.0178 from 0.02
This exactly fits five ODE steps in the default frame time (0.089).
This means that ODE execution time now matches the default minimum frame time.
This eliminates errors between distance travelled as calculated by ODE in clear air and simple extrapolation.
On the old values, ODE would actually do calculations over 0.1 seconds rather than 0.089.
This means that once the avatar is at top speed, no additional packets need to be sent for smooth movement, since no error develops between server and viewer.
This approach replaces the tweaks previously discussed on the opensim-dev mailing list
2011-10-14 21:11:00 +01:00
Justin Clark-Casey (justincc) 4e7d4330c2 Expose minimum frame time and update periods for experimentation.
Settings are at bottom of [Startup] in OpenSimDefaults.ini, override in OpenSim.ini to change
Defaults are the same as previously.
More information to come on opensim-dev shortly.
Feel free to tweak but if you do please don't expect any support unless feedback on certain tweaks is explicitly requested.
2011-10-13 23:47:37 +01:00
Melanie 0faa8db0ef Update OpenSimDefaults.ini to make the prior state (Groups messaging enabled
by default) the config default. This way it will work for current cases while
allowing the use of other groups modules without config bloat.
2011-10-12 09:23:57 +01:00
Justin Clark-Casey (justincc) 8114f895c2 Provide a way to turn the MonitorModule on and off
Default is currently on since this is the historical setting
2011-10-10 22:17:29 +01:00
Justin Clark-Casey (justincc) 5551542c28 Improve explanation of access_ip_addresses in [RemoteAdmin] to say that there are no restrictions if not set 2011-10-08 01:39:27 +01:00
Justin Clark-Casey (justincc) 4073cd6ced Add option to allow only explicitly listed IPs to access RemoteAdmin facilities.
Also adds password check to some functions where this was missing and fixes some parameter checking.
This is a patch from http://opensimulator.org/mantis/view.php?id=5715 with a few small unrelated spacing tweaks from me.
Thanks Michelle Argus.
2011-10-08 01:23:26 +01:00
Justin Clark-Casey (justincc) f1986d54bb Clarify explanation of DeleteScriptsOnStartup switch in [XEngine]. 2011-10-04 22:48:28 +01:00
Justin Clark-Casey (justincc) 844b4f3a16 copy config information on allow/disallow individual os functions into OpenSim.ini.example
I this is generally useful rather than a 'default' setting
2011-09-30 23:55:02 +01:00
Justin Clark-Casey (justincc) e742cffe15 Add Enabled switch in new [Attachments] section in OpenSimDefaults.ini to allow attachments to be temporarily turned off.
This is for debugging purposes.  Defaults to Attachments Enabled
2011-09-30 01:19:22 +01:00
Kevin Houlihan & Michelle Argus 39d7945efc Added a setting to [Startup] section of config that will allow the simulator to start up with no regions configured.
I added the boolean config setting "allow_regionless", defaulting to false. If set to true, opensim will start up ok if no region configurations are found in the specified region_info_source. It will not ask the user to create a region.
2011-09-24 01:59:02 +01:00
Justin Clark-Casey (justincc) 5364607005 Clarify explanation of the "DeleteScriptsOnStartup" config switch and add this to OpenSim.ini.example since it's very useful if you're not updating OpenSim from source.
On reflection, "DeleteScriptsOnStartup" isn't a great name since it suggests real script deletion rather than compiled versions.
2011-09-24 00:22:23 +01:00
Robert Adams b705ad477e BulletSim: update values in OpenSimDefaults.ini to the same as defaults in the source. 2011-08-30 13:49:50 -07:00
Robert Adams 21708b832b BulletSim: add mesh representation. Use meshes for static objects and switch to hulls for physical objects. 2011-08-26 15:51:21 -07:00
Mic Bowman 384cb79a1a Merge branch 'master' into bulletsim
Conflicts:
	OpenSim/Region/Framework/Scenes/SceneManager.cs
2011-08-19 14:49:16 -07:00
Snoopy Pfeffer e19843a0ee WorldMap: Added map item for Land-for-Sale. Implemented backlist item timeouts (default 10 minutes; see also new config file setting BlacklistTimeout) and removing backlisted neigboring regions that have been restarted from the blacklist. 2011-08-14 17:45:23 +02:00
Mic Bowman c3f579046c Merge branch 'master' into bulletsim 2011-08-05 11:13:02 -07:00
Robert Adams 7640b5abf6 BulletSim: Parameters settable from ini file. Linksets. Physical property value tuning 2011-08-05 11:01:27 -07:00
Justin Clark-Casey (justincc) c1c0d780ee correct config comments mistakes 2011-08-03 04:36:25 +01:00
Justin Clark-Casey (justincc) 797def8aa4 Put config to enable disable [NPC] module.
Default is disabled.  You will need to explicitly enable to toy with this.
2011-08-03 04:33:45 +01:00
Justin Clark-Casey (justincc) 835352aee9 Make it clearer what the save_crashes setting in [Startup] actually does. 2011-07-30 01:05:30 +01:00
Justin Clark-Casey (justincc) ea58aee338 Change default AllowScriptCrossings config setting to true.
When this setting is false and other defaults haven't been changed, scripts entering the simulator from another sim are automatically restarted but their state is not preserved.
When this setting is true, state that accompanies the script is reloaded (e.g. if a script had a variable i = 1 when leaving the source region, it will still have i = 1 on the destination region).
This setting does not affect crossings when regions are run in the same simulator.  In this case, state is already preserved.
2011-07-23 02:31:00 +01:00
Makopoppo 4eaca4884e Fixed serverside_object_permission default value confliction 2011-07-23 02:26:13 +01:00
Justin Clark-Casey (justincc) e1ce106790 make [SMTP] default comment option match actual default 2011-07-21 03:21:19 +01:00
Justin Clark-Casey (justincc) 0a09c45726 minor: group all the map tile options together 2011-07-21 03:18:10 +01:00
Justin Clark-Casey (justincc) d2d67a1abf remove pointless quotes from GenerateMaptiles option in OpenSimDefaults.ini 2011-07-21 03:14:43 +01:00
Justin Clark-Casey (justincc) 1c758ae01c make default TextureOnMapTile true for the older map imager
Don't know of a good reason not to do this, seems to work fine.
2011-07-21 03:08:58 +01:00
Justin Clark-Casey (justincc) a9b7487fcb improve and tidy up some config file comments 2011-06-30 22:36:41 +01:00
Justin Clark-Casey (justincc) 698cd0b3c2 Remove the now unused [cms] section from OpenSimDefaults.ini 2011-06-25 01:33:09 +01:00
Oren Hurvitz 0dd3281caf Optionally, don't delete previously compiled scripts on startup 2011-06-24 22:07:20 +01:00
Justin Clark-Casey (justincc) de20f0603f Tell hypergridders when their teleports fail because of the 4096 limit rather than just saying "destination not found"
Instead of performing the 4096 check when the region is linked (and subsequently removing the link), leave the link in place and perform the check in the entity transfer module
This allows us to explicitly tell the hypergridder why the teleport failed (region out of range).
It also allows people on regions that are within range (on a large source grid) to teleport.
The Check4096 config parameter in the [GridService] section is replaced by a max_distance paramter in a new [EntityTransfer] section in OpenSimDefaults.ini
Since the parameter is in OpenSimDefaults.ini no action needs to be taken unless you want to increase this limit.  It could also be decreased.
The check is being made in the base entity transfer module, since I believe the viewer problem occurs both on extremely large grids and while hypergridding.
2011-06-24 19:49:05 +01:00
BlueWall 16fae059bb Comment the alert_uri so it remains disabled until set 2011-05-28 16:40:05 -04:00
BlueWall c7e18f9017 Adding an event to signal that logins are enabled
Added an event to signal the eabling of logins and added an alert to send to a configured service.
2011-05-28 16:20:10 -04:00
BlueWall 99f42c0a6e Add option to disable logins
This just covers script loading for now. More to come.
2011-05-28 00:35:06 -04:00
Justin Clark-Casey (justincc) 7c3e8a106b Merge branch 'master' of https://github.com/allquixotic/opensim-autobackup 2011-05-06 20:51:55 +01:00
BlueWall 8ca7938753 Adding ssl support
Adding ssl support for "Out of Band" applications such as the remote
	admin module or Robust services
2011-05-05 19:56:54 -04:00
Diva Canto 98b84802e4 Changed the defaults, so that it behaves exactly is it has been behaving (no WebFetch cap by default). 2011-05-02 20:19:36 -07:00
Sean McNamara fffd42f5cb Merge git://opensimulator.org/git/opensim 2011-05-02 02:23:18 -04:00
Diva Canto f10666c7ba How this might look like from a configuration perspective. Changes OpenSimDefaults.ini. 2011-05-01 10:07:54 -07:00
Mic Bowman 024c12abc3 Cleaned up various configuration options. Removed the category throttle
limits because the only ones used now are the defaults (which are overwritten
by the client throttles anyway). Updated the default rates to correspond to
about 350kbps.

Also added a configuration to disable adaptive throttle. The default
is the previous behavior (no adaptation).
2011-04-25 10:44:41 -07:00
Sean McNamara d287e0ac68 Merge git://opensimulator.org/git/opensim 2011-04-23 18:33:08 -04:00
Sean McNamara 082fad6dd2 Fix most issues raised by justincc: http://opensimulator.org/mantis/view.php?id=5440 2011-04-23 18:29:13 -04:00
BlueWall e0002f6b64 some mesh config asthetics 2011-04-21 19:04:41 -04:00
BlueWall d9055c8dc3 Group collada meshies settings under [Mesh] in OpensimDefaults.ini 2011-04-21 15:15:24 -04:00
Justin Clark-Casey (justincc) 36c4e94ef7 Move mesh on/off swtich from [Startup] to [Mesh] in anticipation of future config parameters.
Default remains true.
OpenSimDefault.ini changed so if you haven't overriden this switch then you don't need to do anything.
2011-04-18 23:22:04 +01:00
Justin Clark-Casey (justincc) 419fc9427e Provide a configuration setting to control whether multiple taken objects are coalesced to inventory
This is the CoalesceMultipleObjectsToInventory setting in [Inventory] in OpenSimDefaults.ini
Default is true.
2011-04-18 20:03:53 +01:00
BlueWall 40bf417da7 Add ColladaMesh switch 2011-04-14 21:15:42 -04:00
Justin Clark-Casey (justincc) 424995e138 Move example HttpProxy setting to OpenSim.ini.example and tidy 2011-04-12 23:22:21 +01:00
Justin Clark-Casey (justincc) fda393b088 Add information comment to top of OpenSimDefaults.ini and make file consistent 2011-04-11 21:42:28 +01:00
Mic Bowman 5a16fa882c Parameterizes the view distance used to compute and manage
child agents in neighbor regions. This means you can extend
the view on a simulator beyond the default 3x3 regions.

This uses a region default draw distance and should be
replaced at some point by the avatar specified draw distance.
That will require more careful, dynamic recomputation of child
agents every time the draw distance changes.

WARNING: this is experimental and has known instabilities. specifically
all regions "within site" should be running the same default draw distance
or agents will not be closed correctly.
2011-02-22 13:23:54 -08:00