be39f03caa
minor: switch around mixed up circuit code and endpoint data in "show connections" region console command
2012-07-19 23:35:56 +01:00
d1d331a4c0
Make LLClientView instant message handling asynchronous rather than synchronous to prevent long operations from holding up all inbound packet processing.
...
Giving a large folder from one avatar to another was causing a long delay when handled synchronously, since it took some time to retrieve the necessary data from the inventory service.
Handling this asynchronously instead stops this delay from disrupting all avatars in the scene. This has been shown in OSGrid.
I see no reason for not handling all IM messages asynchronously, just as incoming chat is handled asynchronously, so this has been switched for all instant messages.
Thanks to Nebadon for testing this change out.
2012-07-19 23:20:03 +01:00
c4533e755b
Comment out OnIncomingInstantMessage and OnInstantMessage handlers in GroupsModule, since these led to a private blank method
2012-07-19 23:13:08 +01:00
e94831ddab
Stop explicitly closing and nulling out Animator in order to prevent NREs in various places due to race conditions.
...
Even where checks are being made they aren't enough since they all assume that the Animator they just checked is still there in the next line, which is not necessarily the case without locking.
The memory used is small and these should be GC'd anyway when the SP is released. If this is not happening then the wider problem of old SPs being retained needs to be resolved.
2012-07-19 22:59:28 +01:00
ccc7e75ce4
minor: remove some mono compiler warnings
2012-07-19 22:37:48 +01:00
ba80f137b5
Prevent race conditions between two threads that call LLClientView.Close() simultaneously (e.g. ack timeout and an attempt to reconnect)
2012-07-19 22:32:27 +01:00
e9a121e1b2
Add TestCreateDuplicateRootScenePresence() regression test.
2012-07-19 21:54:50 +01:00
c0ab406e2e
Add basic TestCreateRootScenePresence() regression test
2012-07-19 21:41:13 +01:00
6dda7c65ae
Add EventManager.OnRegionLoginsStatusChange fired whenever logins are enabled or disabled at any point, not just during initial startup.
...
This replaces EventManager.OnLoginsEnabled which only fired when logins were first enabled
and was affected by a bug where it would never fire if the region started with logins disabled.
2012-07-19 00:09:22 +01:00
64db0bcbd2
Add back notification to neighbouring regions when RegionReadyModule is not active accidentally just removed in 528004d
2012-07-18 23:40:00 +01:00
528004d349
Perform other region ready actions even if simulator is configured to leave logins disabled on startup.
2012-07-18 23:35:05 +01:00
1971b6bb4f
Stop the 15 second initial script compile wait if a script is being rezzed on a previously empty region.
2012-07-18 22:24:52 +01:00
d97e27434c
Fix bug where region ready would be triggered a second time if a script was rezzed on a previously script-free region.
...
There is no need to listen for OnRezScript in RegionReadyModule since OnEmptyScriptCompileQueue will only fire if scripts were compiled.
2012-07-18 22:17:39 +01:00
58b72933c8
Fix bug where region ready was being triggered twice in quick succession if a region contained no scripts.
2012-07-18 22:09:20 +01:00
4973fddc51
Establish EventManager.OnRegionReady event. This will only be triggerred once when the region is ready.
...
Switch MapImageServiceModule to use this.
2012-07-18 21:52:07 +01:00
6460e587c4
Pass entire scene object in OnLoginsEnabled event rather than just the region name.
...
This saves listeners from having to re-retrieve the scene from their own lists, which won't work anyway if multiple regions with the same name have been allowed
2012-07-18 21:29:12 +01:00
742ad5eb93
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-07-18 21:26:28 +01:00
dd85d7d981
Merge branch 'master' of git://opensimulator.org/git/opensim
2012-07-18 13:07:07 -07:00
0dd14ca0a3
Missing parameter in log error message was throwing exception
2012-07-18 13:05:48 -07:00
cd6d7429f8
Only listen to LoginsEnabled event in RegionReadyModule if it has been asked to disable logins until all scripts have been compiled
2012-07-18 21:03:35 +01:00
eb590becf0
Close() the ScenePresence after we've removed it from the scene graph, to cut down race conditions when another thread manages the grab the presence after some SP structures have been reset.
2012-07-18 00:14:02 +01:00
b9749d5aaf
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-07-17 23:48:53 +01:00
48a5f10be1
Revert "Revert "refactor: make llGiveInventory() use existing GetInventoryItem() method rather than iterate through TaskInventory itself.""
...
This reverts commit 59a29f5f22
2012-07-17 23:48:09 +01:00
56870d9609
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-07-17 23:34:50 +01:00
ecb759c1e5
Fix regression where llGiveInventory() had stopped asking non-owner receivers to accept/decline.
...
This appears to be a regression from back in commit db91044http://opensimulator.org/mantis/view.php?id=6089
2012-07-17 23:31:38 +01:00
59a29f5f22
Revert "refactor: make llGiveInventory() use existing GetInventoryItem() method rather than iterate through TaskInventory itself."
...
This reverts commit 58b13d51a7
2012-07-17 22:56:21 +01:00
c489bc1cd2
Make the scrpt running flag work properly
2012-07-17 15:00:42 +02:00
356d597296
Restore update of inventory item on derez/logout. This is necessary to update the name if this has been changed whilst attached.
...
Note, this behaviour appears to be at variance with the ll grid as of Tues 17 July 2012, testing with viewer 3.2.1.
The item name in inventory does not change either at the point of detach or after a relog.
2012-07-17 00:17:51 +01:00
b0facd147a
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-07-17 00:02:45 +01:00
b6476eaac3
Stop sending the viewer an inventory create message if a known attachment item is updated.
...
This doesn't seem to make any sense and probably stems from a period when this code was directly involved in attaching objects directly from the scene.
This message is already being sent by InventoryAccessModule code instead.
2012-07-17 00:00:26 +01:00
2a85372169
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2012-07-16 23:33:33 +01:00
1c3b0da74a
Revert "Fix script "Running" behavior"
...
A better solution using the already present flags must be found.
This reverts commit 6d3ee8bb39
2012-07-16 23:31:55 +01:00
c1667d39a6
refactor: factor out common code in WebStatsModule.OnMakeRootAgent()
2012-07-16 23:15:02 +01:00
217f47b0d5
In WebStatsModule.OnMakeRootAgent(), get region ID directly from SP.Scene.RegionInfo.RegionID instead of manually looking it up from the stored scene list.
2012-07-16 23:09:48 +01:00
ed14dac0a3
Stop warning about no session from ViewerStats if user teleports to another region in the same simulator that was not next to the source region.
...
This was because teleporting to the new region invoked the new session setup code before the agent was removed from the old region, which then invoked the session teardown code.
Now, we only invoke the teardown code if the region ID occupied by the agent being removed is the same as the one registered for the current session.
2012-07-16 23:03:23 +01:00
ee7478fa16
sending more user-friendly messages to the script error window rather than the thrown exceptions.
...
Signed-off-by: Melanie <melanie@t-data.com>
2012-07-16 21:32:38 +01:00
5d3723a47f
update PrimMesher.cs to dll version r72 which fixes some path errors in sliced linear prims. Addresses Mantis #6085
2012-07-13 21:22:15 -07:00
84b7ae2573
acting on feedback from justincc
2012-07-14 01:45:34 +01:00
423101b425
acting on feedback from justincc
2012-07-14 01:45:34 +01:00
e3453dd9ca
added in some extra variables, it sometimes thinks it is on the same parcel :(
...
Signed-off-by: SignpostMarv <github@signpostmarv.name>
2012-07-14 01:45:34 +01:00
b6cd3b625e
adding workaround for silent failure if position is outside the bounds of a region, implementing parcel prim count check.
...
Signed-off-by: SignpostMarv <github@signpostmarv.name>
2012-07-14 01:45:34 +01:00
8d59385eea
Implementation of llSetRegionPos(). Does not implement failure on object entry/prim limit/access restrictions.
...
Signed-off-by: SignpostMarv <github@signpostmarv.name>
2012-07-14 01:45:34 +01:00
ec6a195e40
When generating a Warp3D texture, set the detailTexture[i] variable on resize from the JPEG2000 original rather than only saving it to disk.
...
This appears to be the cause of the warp 3d exception seen when starting a new region for the first time.
Subsequent starts were okay because resized saved bitmap was correctly retrieved from disk.
Should fix http://opensimulator.org/mantis/view.php?id=5204 and http://opensimulator.org/mantis/view.php?id=5272
2012-07-14 01:11:30 +01:00
2954ceccae
Remove a callstack print out I accidentally left in 2 commits ago in 9ccb578
2012-07-13 01:08:49 +01:00
884d603cac
Rather than instantiating a UTF8 encoding everywhere when we want to supress the BOM, use a single Util.UTF8NoBomEncoding.
...
This class is thread-safe (as evidenced by the provision of the system-wide Encoding.UTF8 which does not suppress BOM on output).
2012-07-13 01:03:28 +01:00
9ccb578721
Don't cache regions data on the other unused LocalGridServiceConnector that the module code still sets up even if we're using one directly instantiated from the RemoteGridServiceConnector.
...
Also improves log messages to indicate which regions are sending/receiving various neighbour protocol messages.
2012-07-13 00:44:00 +01:00
d6f54b25cd
Stop redundantly passing in the endpoint to the LLClientView constructor.
...
This can always be retrieved via the LLUDPClient and is so done in various places already.
2012-07-12 23:48:42 +01:00
dda999a22c
Remove IClientIPEndpoint client interface for now.
...
This may well come back in the future when this subinterface is actually used but it currently isn't and I feel the name was poor.
Everything uses IClientAPI.RemoveEndPoint which also returned the full endpoint rather than just the ip address.
2012-07-12 23:43:02 +01:00
3b3d9967b1
Remove IClientAPI.GetClientEP() in favour of existing identical IClientAPI.RemoteEndpoint.
2012-07-12 23:29:57 +01:00
75ab9b4b88
Change very recent AllowedViewerList and BannedViewerList config setting names in OpenSim.ini.example to AllowedClients and BannedClients to match long-existing settings in [LoginService]
...
Also changes separator from comma to bar to match existing [LoginService] config features.
Divergence of config names for identical facilities in different places makes for an unnecessarily confusing user experience.
2012-07-12 23:18:30 +01:00
Justin Clark-Casey (justincc)