227d2e2b61
Avoid a possible race condition where the XEngine script compile thread could complete but see OnRezScript() insert a new job and complete before it set m_CurrentCompile = null
...
If the above happened, it would mean the new script would not compile until some script was added for compilation.
2014-12-10 00:04:10 +00:00
76722d8324
In XEngine, enqueue a script rez to the compile queue after setting m_CompileDict to avoid a rare but not impossible race condition.
2014-12-09 23:59:19 +00:00
f3ab7c0f5c
refactor: rename IteratingUuidGather.AddAssetUuidToInspect() and RecordAssetUuids() to AddForInspection() as this properly describes what both of these methods do.
2014-12-05 00:21:42 +00:00
b0ff3236be
Make "fache assets" console command more efficient by only updating access times on each cached asset once, not for every reference.
2014-12-05 00:09:01 +00:00
9208fb5d54
refactor: Make IteratingUUIDGatherer take a dictionary in its constructor like UUIDGatherer, so we can deal with future cases where the dictionary may already be pre-populated.
2014-12-04 23:55:59 +00:00
bee3f203cd
Allow scripts in attachments on an owned NPC to call NPC functions on that NPC
2014-12-04 22:52:46 +00:00
d930ca7b1d
minor: Add doc about [InventoryService] AllowDelete setting to robust ini example files.
2014-12-04 19:37:25 +00:00
9dbe99af0f
If "fcache assets" is executed, don't stop with an exception if there's an access violation if another thread is operating on the file at the same time.
...
Resolves one issue from http://opensimulator.org/mantis/view.php?id=7271
2014-12-04 01:53:42 +00:00
ad91143880
refactor: breakout flotasm cache last file access time to separate UpdateFileLastAccessTime() method for imminent reuse.
2014-12-04 01:51:01 +00:00
c36bfdc60f
Don't worry about checking FlotsamAssetCache.m_CurrentlyWriting when updating access time.
...
The majority of updates won't be for anything currently writing and any sharing exception from an actual clash can be caught and ignored anyway.
2014-12-04 01:46:00 +00:00
5861401faa
Remove long unused region parameters from SceneBase. Some of these weren't even being set. Region parameters come from Scene.RegionInfo instead.
2014-12-03 21:44:22 +00:00
2d2aa6e076
minor: Just have one message that displays successful registration of a region with its parameters rather than 2
2014-12-03 21:40:39 +00:00
d34ad345d5
minor: If we are recompiling scripts in response to a ScriptStopStrategy config change (a rare situation), then explicitly log this for debug purposes.
2014-12-03 21:08:43 +00:00
c3c05a8693
Reintroduce general xengine extra debugging log level. This can be controlled at runtime with the command "debug xengine log <level>", as with similar commands.
...
If log level is 1 then every script load is logged.
This means the <logger name="OpenSim.Region.ScriptEngine.XEngine"> section in OpenSim.exe.config is no longer needed to avoid log spam on regions with many scripts and can be removed.
2014-12-03 20:48:17 +00:00
805b7ccb3e
minor: improve logged error in XEngine.SetXmlState if there was a problem writing the linemap.
...
The previous error report of already exists is inaccurate since existing files do get overwritten.
2014-12-03 20:35:49 +00:00
72d1d96c5c
Always close script linemap file after reading and always dispose of other streams in the script engine even if exceptions are thrown.
2014-12-03 20:31:09 +00:00
caa7b1e6a1
Fix typo in ini
2014-12-01 10:15:56 -05:00
db2a22e622
BulletSim: update BulletSim DLLs and SOs.
...
Hopefully fix problem of multiple physical meshes crashing Windows simulators.
2014-11-30 19:53:01 -08:00
3642198838
BulletSim: move detail log of InternalScheduleRebuild to reduce log file spam
2014-11-30 19:53:00 -08:00
63d192f011
BulletSim: Remove linkset 'Incomplete' flag as its meaning couldn't be made clear. Add 'InternalScheduleRebuild() CHange rebuild code to call InternalScheduleRebuild() rather than ForceRebuild() to limit the scope of the changes made by the linkset.
2014-11-30 19:53:00 -08:00
41a943bfd0
BulletSim: add BSLinkset.AllPartsComplete that checks of all linkset members are not Incomplete and not waiting for assets. Change BSPrimLinkable to use AllPartsComplete.
2014-11-30 19:52:59 -08:00
eef954a214
BulletSim: Make BSPrimLinkable 'incomplete' if any of its children are waiting for assets to load.
2014-11-30 19:52:59 -08:00
cf85ade81e
BulletSim: add shape and linkset rebuild scheduled flags. Add BSPrim.Incomplete flag based on rebuild flags to say when an object is being rebuilt.
2014-11-30 19:52:58 -08:00
981fff95cd
A little more cleaning of config files.
2014-11-30 15:09:13 -05:00
d0f9644417
A little bit of cleanup behind commit r5f88ceab2269
2014-11-30 14:57:47 -05:00
5f88ceab22
Set configuration files to use key expansion for widely used common settings.
2014-11-30 13:59:23 -05:00
432f0e8783
Correct 690fe0c to actually log the exception reported in DoOnRezScriptQueue()(and now the scene name).
2014-11-29 15:04:16 +00:00
690fe0c5e5
If there are any exceptions in XEngine.DoOnRezScriptQueue() then log the error and always set m_CurrentCompile = null
...
Setting m_CurrentCompile = null in the finally block reduces the risk that an exception could permanently stop any future scripts compiling until the simulator is restarted.
If an exception is seen from this then please report and further changes to fix the bug or improve compiling reliability can be made.
2014-11-29 01:42:52 +00:00
55e064baf7
Remove minor race condition where two threads could race on fields such as m_ScriptFailCount as set in XEngine.DoOnRezScriptQueue()
2014-11-29 01:33:14 +00:00
79e37e5ecc
Restore zero'ing RawVelocity in BSCharacter.ZeroMotion() in favour of not calling ZeroMotion in SetPhysicalProperties() at all
...
SetPhysicalProperties is only called when adding a new character so it looks like there is no existing data to reset anyway.
2014-11-29 01:13:48 +00:00
dfab60a7fd
minor: Remove a few indenting problems introduced to recent 265fe349 and convert the m_log.DebugFormat() call back to the original DetailLog call
2014-11-29 00:53:13 +00:00
dcc36507f3
Halve the prediction lag for region crossing to improve most flying region crossings without degrading the walk cross experience (neither of which have been that great anyway).
2014-11-29 00:48:26 +00:00
39eab72d7c
When performing region cross, don't add the velocity to the new position in ETM.CrossAgentIntoNewRegionMain() since this has already been performed by SP.CheckForBorderCrossing()
2014-11-29 00:16:23 +00:00
265fe349e0
Somewhat improve avatar region crossings by properly preserving velocity when avatar enters the new region.
...
This commit addresses the following issues were causing velocity to be set to 0 on the new region, disrupting flight in particular
* Full avatar updates contained no velocity information, which does appear to have some effect in testing.
* BulletSim was always setting the velocity to 0 for the new BSCharacter. Now, physics engines take a velocity parameter when setting up characters so we can avoid this.
This patch applies to both Bullet and ODE.
2014-11-29 00:12:11 +00:00
09534f378e
Avoid repeated lag-generating continuous attempts to retrieve HG service Urls in UMM if the initial request fails, possibly due to the home URL not being present
...
Instead, the failure information is effectively added to the memory cache (so no persistence over simualtor sessions).
A future improvement may be to invalidate negative cache results after some time has passed in case the failure was transient.
Looks to resolve http://opensimulator.org/mantis/view.php?id=7382
2014-11-28 01:16:30 +00:00
d9f7aa41c1
Remove unmaintained MSSQL support.
...
This has not been maintained for more than 2 years, is unimplemented for newer features (e.g. built-in groups) and has no core developers using it.
If somebody fixes these issues then it could be reinstated.
2014-11-28 00:27:13 +00:00
73234e2098
Stop writing SizeZ config parameter for now when creating regions from console as it is unused/ignored, at least in core.
2014-11-28 00:04:10 +00:00
e8ec1e6de5
minor: Make Robust.ini.example and Robust.HG.ini.example files consistent within themselves and OpenSim.ini.example by changing tabs to spaces, indenting, spacing.
2014-11-28 00:01:32 +00:00
ee9fae23ff
Be more explicit again in UMM bad HomeURL message by logging the original creator data
2014-11-27 00:32:04 +00:00
8a27fc5d61
Make UMM.AddUser(UUID, string) log message when bad creatorData is given to reflect its location (UMM not Scene) and add the user name and ID.
2014-11-27 00:24:17 +00:00
62b778ca4d
Merge branch 'master' of /team/src/opensim
2014-11-25 19:27:28 -05:00
a76aec8467
Fix whitespace hoping to avoid a flogging
2014-11-25 19:27:15 -05:00
86367d7219
refactor: Move methods to start a monitored thread, start work in its own thread and run work in the jobengine from Watchdog to a WorkManager class.
...
This is to achieve a clean separation of concerns - the watchdog is an inappropriate place for work management.
Also adds a WorkManager.RunInThreadPool() class which feeds through to Util.FireAndForget.
Also switches around the name and obj arguments to the new RunInThread() and RunJob() methods so that the callback obj comes after the callback as seen in the SDK and elsewhere
2014-11-25 23:56:32 +00:00
20cede12a9
Fix ghosts copy of SimulatorFeatureModule to enable logging.
2014-11-25 23:28:38 +00:00
66b1c37973
Fix bug in HG attachment throttling code where attachments were never rezzed on any teleport within a foreign grid after the first.
...
Bug was introduced in ghosts branch commit 69abade
2014-11-25 23:23:12 +00:00
4b45a1b6ad
Change jobengine logging command to "debug jobengine log <int>" rather than loglevel, in common with similar commands.
2014-11-25 23:23:11 +00:00
b1fd0d35e5
Make small adjustment to JobEngine default from previous commit to enable it when [Startup] section is not present (though this is extremely unlikely).
2014-11-25 23:23:11 +00:00
59b38f842a
Add [Startup] JobEngineEnabled setting that allows the job engine to be disabled for testing purposes if necessary.
2014-11-25 23:23:11 +00:00
28d1dbfee4
Move conditionals which control whether a task is placed in the JobEngine inside Watchdog.RunJob() (renamed from RunWhenPossible) and generalize them.
2014-11-25 23:23:11 +00:00
124be38f74
Add [BulletSim] option AvatarToAvatarCollisionsByDefault to control whether avatars collide. This is true by default.
...
This is implemented with a new collision type (PhantomToOthersAvatar) to potentially allow colliding and non-colliding avatars to be present in the same scene.
So there is no provision yet for giving avatars different collision types.
This commit replaces the temporary change in commit f3eaa6d8
2014-11-25 23:23:11 +00:00
Justin Clark-Casey (justincc)