d98af79f77
Make the asset retrieval concurrency a config switch. The current value
...
of 30 is still hanging badly on some mono versions. The switch defaults to
30 to preserve current behavior.
2012-10-04 08:41:06 -07:00
b977f962fa
Allow default animation to be stopped to be replaced with another one.
...
Fixes Mantis #6327
2012-10-04 15:42:52 +01:00
efb9b7014e
Allow default animation to be stopped to be replaced with another one.
...
Fixes Mantis #6327
2012-10-04 15:20:04 +02:00
89d342b5ce
more changes and more non active code
2012-10-04 08:14:52 +01:00
113549c2e9
apply cmic fix to multi layer wearables
2012-10-04 05:29:32 +01:00
893b44497d
Merge branch 'avination' into ubitwork
2012-10-04 05:05:57 +01:00
51e1830f86
more changes. Most code not in use
2012-10-04 04:55:53 +01:00
aa52c8b20f
Output monitor data in response to console command on MainConsole.Instance rather than m_log
...
This should really be happening for all console commands (though many don't).
However, things might get difficult if both a console command and other code invoke the same paths.
2012-10-04 02:17:57 +01:00
3d36a6d55c
Add generic PercentageStat.
...
Not yet used.
2012-10-04 01:27:40 +01:00
e717398f6c
Add experimental "slow frames" stat, available in "show stats" and via the monitoring module.
...
This increments a SlowFrames counter if a frame takes over 120% of maximum time.
This commit also introduces a generic OpenSim.Framework.Monitoring.Stat which is available to any code that wants to register a statistic.
This is more granualar than asking objects to create their own reports.
At some point this will supersede earlier IMonitor and IAlert facilities in MonitoringModule which are only available to scene code.
2012-10-04 00:32:42 +01:00
a2ab3b88de
Soliciting for comments on smoothness of physics objects for this build.
...
This introduces expected contact point hints to the ODE Collider to better determine when to throttle updates as excessive. This /should/ smooth physics objects out again, however, I cannot know every configuration of OpenSimulator, so I'm requesting that testers please examine this change on their build.
Thanks!
2012-10-03 18:30:44 -04:00
a9f2bc150f
missing changed file
2012-10-03 23:18:35 +01:00
9988558ec1
meshworker basic replacement of SOP CheckSculptAndLoad ( for now disabled
...
for all physics engines)
2012-10-03 23:14:56 +01:00
4f51cc325c
making meshworker have more work..
2012-10-03 20:36:41 +01:00
7137b234b4
introduce a ODEMeshWorker class, should be pure cosmetic changes for now
2012-10-03 19:33:28 +01:00
b9baab5521
Fix the use of the wrong index when locating the assets associated
...
with wearables. The fact that this hasn't caused problems earlier
suggests either that no one is using multiple layers of wearables or
that this code is useless because the assets are coming in with the
wearables request.
2012-10-03 10:45:57 -07:00
8a552ac907
Merge branch 'master' into careminster
2012-10-03 17:40:13 +01:00
bf565e9747
Merge branch 'avination' into careminster
...
Conflicts:
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
2012-10-03 17:40:11 +01:00
653a98e891
Fix a viewer crash issue
...
Conflicts:
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
2012-10-03 17:39:13 +01:00
fdacb88b29
Fix a viewer crash issue
2012-10-03 17:11:02 +02:00
e56ef2720e
I propose that 0.5m/step change for linear velocity is too big of a change to control the reporting of a new angular velocity. I think that this could be here for one of two reasons, 1. vehicles and llMoveToTarget with axis lock, or 2. To attempt to make things look more stable in the physics scene then they really are, however, this also really affects the angular velocity reporting negatively causing things to spin wildly and jump back into place repeatedly. To compromise, if the prim is a vehicle or is being used as a motor target, the original functionality is still applied. If that's not the case, angular velocity is reported with a linear velocity of 0.02m/step. To be clear on the effect of the physical world... When you push things, there's still a lag time where you walk into the object but once the object is in motion, it begins to move as you would expect so results in slightly more realistic motion.
2012-10-03 02:30:23 -04:00
df3d1d1301
Minor Modification, switch /2 to 0.5f in ODEPrim.Velocity
2012-10-02 23:14:35 -04:00
a5b8359b8e
BulletSim: fix crash on load that showed up on 32bit Linux.
2012-10-02 17:04:33 -07:00
23d5bafa7f
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/OSSL_Api.cs
2012-10-03 00:24:33 +01:00
f433ee317b
Attempt to fix Mantis #6311 . Honor a destination folder if one is given
2012-10-02 23:03:52 +01:00
ca5c0814f4
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2012-10-02 23:02:53 +01:00
f1886c449c
Attempt to fix Mantis #6311 . Honor a destination folder if one is given
2012-10-02 23:02:01 +01:00
a1679517d3
correcting typo
2012-10-02 22:14:47 +01:00
f555febdb7
taking into account the recent introduction of implicit operators
2012-10-02 22:14:46 +01:00
ce7694c108
added perms checking, duplicated functionality to methods that do not require perms and have higher threat level
2012-10-02 22:14:46 +01:00
c677c04f10
fixing copypasta
2012-10-02 22:14:46 +01:00
35b7c80e0b
implementing osDropAttachment & osDropAttachmentAt
2012-10-02 22:14:46 +01:00
e81e19a3b4
string format arguments in wrong order
2012-10-02 22:11:40 +01:00
210f227fe6
BulletSim: Make parameter value defaults match what should be the default and what is in OpenSimDefaults.ini. Comment and debug printout changes.
2012-10-02 11:14:15 -07:00
ce47d0c454
BulletSim: Add ForcePosition and ForceOrientation to BSPhysObject and to its children of BSPrim and BSCharacter.
2012-10-02 11:14:09 -07:00
d8a786870b
BulletSim: Fix problem where box shapes were not being rebuilt if the shape type changed.
2012-10-02 11:14:03 -07:00
ce97ebdc88
BulletSim: Fix linkset problem where delayed manipulations of child objects was using the child shape address at call time rather than the one created at taint time.
2012-10-02 11:13:57 -07:00
b6b505163c
BulletSim: call ForcePosition and ForceOrientation in BSDynamics so there is no lag between what the vehicle code sees and what the physics engine is using.
2012-10-02 11:13:51 -07:00
1e5869dcf6
Add Flush() method to LogWriter. Also correct line endings to Linux form.
2012-10-02 11:13:45 -07:00
f2c78281ce
BulletSim: fix the FloatOnWater code so avatars can normally go underwater.
2012-10-02 11:13:39 -07:00
33617e09a1
BulletSim: impliment FloatOnWater OS function.
2012-10-02 11:13:32 -07:00
c1740a2903
Correct my name in CONTRIBUTORS.txt
2012-10-02 11:13:26 -07:00
5221f2421e
BulletSim: remove warnings for unused variables.
2012-10-02 11:13:20 -07:00
54ec8b197b
Add money event routing to the script engine.
2012-10-02 01:25:55 +01:00
14b659e550
Send money() events to the clicked prim. Reverting a change I made over a year ago.
2012-10-02 01:17:46 +01:00
402128bb53
Prevent the ExtraSettings code from crashing SQLite driven sims.
2012-10-02 00:51:38 +01:00
e40cc46712
Merge branch 'master' into careminster
2012-10-02 00:06:02 +01:00
21c83d6238
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Framework/Servers/HttpServer/BaseHttpServer.cs
OpenSim/Services/Connectors/Asset/AssetServicesConnector.cs
2012-10-02 00:03:37 +01:00
0b9bf236dd
On more virtual method
2012-10-01 15:55:24 -07:00
503ce70f74
Allow setting connection limits, part 2
2012-09-30 16:31:23 +01:00
Mic Bowman