Commit Graph

149 Commits (fdf8732cd712d8a5799a817e61d4c68e204ba9a2)

Author SHA1 Message Date
Justin Clark-Casey (justincc) 523213060b Add WaitForEventCompletionOnScriptStop [XEngine] config param to OpenSimDefaults.ini to allow change of the wait time for an event to complete on script removal before aborting its thread
Default is 1000, as has previously been the case.
This parameter exists for further debug work concerning mono 2.10 crashes that may be related to locks not being removed on Thread.Abort
2012-12-13 23:21:25 +00:00
Robert Adams 9b98011714 BulletSim: update OpenSimDefaults.ini with current default values for friction and collision margin. Remove some of the BulletSim parameters that are very esoteric and dangerous. Most of the remaining parameters are features one can 'see'. 2012-11-25 20:04:30 -08:00
Justin Clark-Casey (justincc) edbdbd44b9 Enable further client stack packet pooling by default by setting RecycleBaseUDPPackets = true by default.
This reduces base memory churn of every client connection, improving the garbage collection situation.
The effect is a significant portion of base load (an avatar standing still on a completely blank island)
but will probably still be swallowed up by other memory use on active regions.
Tests have shown no noticeable impact on speed of processing incoming packets, though setting remains
in case a switch back is needed.
2012-11-23 04:09:45 +00:00
Justin Clark-Casey (justincc) f473252fa8 Add AllowRegionRestartFromClient setting to [EstateManagement] section of OpenSim.ini.
Setting this to false will block all restart requests from the viewer even if they are otherwise legitimate.
One use is to block region restarts if necessary whilst restart functionality remains buggy or triggers bugs in modules,
though these should be fixed as soon as practicable.
Default is true, as has been the case historically.
2012-11-23 03:56:53 +00:00
Robert Adams cbc7e7bf85 BulletSim: Make avatar capsule so it is not circular.
Simple attempt to make avatars better shaped.
Replace parameter 'avatarCapsuleRadius' with 'avatarCapsuleWidth'
and 'avatarCapsuleDepth'.
More tweeking to avatar height calculation. A little better but
short avatar's feet are above the terrain and tall avatar's feet
are a little below the ground.
2012-11-21 16:43:53 -08:00
BlueWall 665f79e15c Expose configuration options for the XmlRpcGridRouter
Expose configuration options for the XmlRpcGridRouter to allow simulators to register llRemoteData channels with an external routing service
2012-11-19 21:51:37 -05:00
PixelTomsen a180fef99e remove entry OpenGridProtocol in OpenSimDefaults.ini - module was deleted
Signed-off-by: Diva Canto <diva@metaverseink.com>
2012-11-11 11:16:52 -08:00
Diva Canto 4ac857f902 One more module: EventQueueGetModule. Also making it non-optional for this dll. 2012-11-10 08:48:31 -08:00
SignpostMarv a09cba6da3 refactoring to use assembly:classname style of configuration 2012-10-29 23:39:01 +00:00
SignpostMarv a16ddbee41 Renaming module back to SoundModule as the hypothetical plan was to make another module using the shared region module interface, but this was pointed out by Melanie_T to be mostly pointless. 2012-10-29 23:39:01 +00:00
SignpostMarv e0b5a3cd90 tweaking configuration logic so that the INonSharedRegionModule will load by default 2012-10-29 23:39:01 +00:00
Justin Clark-Casey (justincc) cd3762ca9f Add experimental [Groups] MessageOnlineUsersOnly option for Flotsam XmlRpc groups.
This retrieves and caches information from the PresenceService to only send messages to online users.
This is reported to much improve performance for large groups where most users are offline.
Cache is 20 seconds to balance requests against users not receiving messages until cache updates.
This is an alternative to an approach where login/logout notification is sent directly from simulator to groups service.
However, I'm not convinced that this PresenceService approach is actually better.  Needs more thought.
2012-10-20 01:26:04 +01:00
Justin Clark-Casey (justincc) fc861c7904 Add optional pool for the UDPPacketBuffer objects that handle all incoming UDP data.
Even when an avatar is standing still, it's sending in a constant stream of AgentUpdate packets that the client creates new UDPPacketBuffer objects to handle.
This option pools those objects.  This reduces memory churn.
Currently off by default.  Works but the scope can be expanded.
2012-10-16 23:35:05 +01:00
teravus 7e90ea3551 av_av_collisions_off = false OdePhysics Settings in OpenSimDefaults.ini - No Avatar Avatar Collisions. This causes avatar to be able to walk through each other as if they're ghosts but still interact with the environment. 2012-10-09 10:41:16 -04:00
teravus 764270a0d8 Add config option to plant avatar where they are reducing avatar avatar 'pushability' av_planted see OpenSimDefaults.ini. Use when you have unruly visitors that rudely push each other around. Still allows a small amount of movement based on the avatar movement PID controller settings. You can increase the spring tension in the PID controller and really prevent any movement if you would like. 2012-10-09 09:26:11 -04:00
Mic Bowman d98af79f77 Make the asset retrieval concurrency a config switch. The current value
of 30 is still hanging badly on some mono versions. The switch defaults to
30 to preserve current behavior.
2012-10-04 08:41:06 -07:00
Robert Adams 735d89e369 BulletSim: btGhostObjects working to make 'volume detect' work.
Rearrangement and cleanup of shape collection code. Much more readable.
Enabling and use of collision filters and masks.
Addition of ID to body creation BulletSimAPI calls so always set in
    shape for collision reporting.
Change default of ShouldSplitSimulationIslands and ShouldRandomizeSolverOrder
    from 'false' to 'true'. When 'false', this suppresses NO_CONTACT_RESPONSE
    which makes volume detect fail.
2012-09-27 22:01:42 -07:00
Justin Clark-Casey (justincc) d26fbf727a Comment out unused RestPlugins text in OpenSimDefaults.ini 2012-09-28 02:19:15 +01:00
Diva Canto 6511c3b5c6 Merge branch 'master' of ssh://opensimulator.org/var/git/opensim 2012-09-27 16:43:38 -07:00
Diva Canto 7a50705188 Removed the bits about the TOSModule. That module doesn't go into core. WARNING: migration on GridUser withdrawn too, but left the migration number there. 2012-09-27 16:43:18 -07:00
Justin Clark-Casey (justincc) 2bf42f30af Add MaxPrimsUndo config setting to [Startup] section of OpenSim.ini.
This controls how many undo steps the simulator will store for each prim.
Default is now 20 rather than 5 as it briefly was.
The default number could be increased through this is a memory tradeoff which will scale with the number of prims in the sim and level of activity.
2012-09-27 00:12:34 +01:00
Diva Canto ae58cf4224 TOS module. WARNING: migration in GridUser table. 2012-09-25 20:03:49 -07:00
Justin Clark-Casey (justincc) f2a9d26118 Make ResendAppearanceUpdates = true by default in [Appearance] in OpenSimDefaults.ini.
This resends appearance uuids to avatars in the scene once a minute.
I have seen this help in the past resolve grey appearance problems where viewers have for unknown reasons sometimes ignored the packet.
The overhead is very small since only the UUIDs are sent - the viewer then requests the texture only if it does not have it cached.
This setting will not help with cloudy avatars which are usually due to the viewer not uploading baked texture data or uploading something that isn't valid JPEG2000
2012-09-20 01:40:05 +01:00
BlueWall d29fc53052 Fix some inconsistencies in configurartion: NonPhys prims
Fix inconsistencies between configuration parameter names and their description names. Changing the configuration parameters for non physical prim size min-max from Nonphys* to NonPhys*.

  Please update your OpenSim.ini and Regions.ini to reflect these changes.
2012-09-18 09:53:45 -04:00
Justin Clark-Casey (justincc) ebb394bbda Fix indentation and issues where tabs were used instead of spaces in commit 783ee949 2012-09-12 01:45:34 +01:00
SignpostMarv 783ee949ea implementing per-region configuration of limits on the number of prims one can have in a linkset
Applied with changes - patch was based on a repo different from core

Signed-off-by: Melanie <melanie@t-data.com>
2012-09-09 12:59:25 +01:00
Justin Clark-Casey (justincc) 8f02fd926e If reusing dynamic textures, do not reuse small data length textures that fall below current viewer discard level 2 thresholds.
Viewer LL 3.3.4 and before sometimes fail to properly redisplay dynamic textures that have a small data length compared to pixel size when pulled from cache.
This appears to happen when the data length is smaller than the estimate discard level 2 size the viewer uses when making this GetTexture request.
This commit works around this by always regenerating dynamic textures that fall below this threshold rather than reusing them if ReuseDynamicTextures = true
This can be controlled by the [Textures] ReuseDynamicLowDataTextures config setting which defaults to false.
2012-09-06 22:12:05 +01:00
Justin Clark-Casey (justincc) 3ed0d79b00 Make ReuseDynamicTextures an experimental config setting in [Textures]. Default is false, as before.
If true, this setting reuses dynamically generated textures (i.e. created through osSetDynamicTextureData() and similar OSSL functions) where possible rather than always regenerating them.
This results in much quicker updates viewer-side but may bloat the asset cache (though this is fixable).
Also, sometimes issue have been seen where dynamic textures do not transfer to the viewer properly (permanently blurry).
If this happens and that flag is set then they are not regenerated, the viewer has to clear cache or wait for 24 hours before all cached uuids are invalidated.
CUrrently experimental.  Default is false, as before.
2012-08-30 22:57:40 +01:00
Robert Adams ccc69d66a1 BulletSim: add parameters and functionality to specify the mesh
level of detail for large meshes.
Remove parameter and code for DetailLog (conditional logging into
   regular log file).
2012-08-17 13:34:18 -07:00
Robert Adams 2b982ab212 BulletSim: add physics logging parameters to OpenSimDefaults.ini. Remove trailing semis from some the of the value definitions. 2012-08-15 12:08:25 -07:00
Robert Adams 5ab151c2d6 BulletSim: add avatar code to keep avatars from ending up trapped under the terrain 2012-08-08 13:48:49 -07:00
Justin Clark-Casey (justincc) 205f2326dc Consolidate PersistBakedTextures, DelayBeforeAppearanceSend and DelayBeforeAppearanceSave into [Appearance] section from [Startup] config section so that all appearance settings are in the same place and not in the startup bucket.
All these settings are in OpenSimDefaults.ini only.  If you are using them then please adjust your OpenSim.ini
2012-08-03 23:02:39 +01:00
Justin Clark-Casey (justincc) 789e88d8bd Move previously unadvertised SendPeriodicAppearanceUpdates setting from [Startup] to [Appearance] config section.
Add description and default of false (as before) to OpenSimDefaults.ini
If set to true, this config switch will resend avatar appearance information (a small amount of UUID data, not the baked textures themselves) to other avatars in the sim every 60 seconds.
For me, this has helped with situations where avatars appear persistently grey - the LL viewer sometimes did not appear to request assets the first time the appearance data was sent.
However, this switch will not help with other appearance failure situations (e.g. failure to bake assets).
This setting is experimental but will not have any significant impact on the simulator if turned to true.
2012-08-03 21:36:00 +01:00
Robert Adams 8b04e8a297 BulletSim: Debugging log statements added. Reduced size of updata buffer trying to find a corrupted memory problem. Update DLL and SO. 2012-08-02 16:30:23 -07:00
Robert Adams 7d30637d51 BulletSim: refactor all the linkset logic out of the prim class
and into its own class. The BulletSim data structures track
individual prims as linksets of 1 so most of the prim code is not
different between a linked and unlinked object.
2012-07-26 16:05:57 -07:00
Robert Adams d7add2940a BulletSim: add parameters for setting linkset constraint factors 2012-07-25 16:31:08 -07:00
Justin Clark-Casey (justincc) 22f25dfcab Implement max_external_urls_per_simulator setting in [LL-Functions] to allow configuration of how many urls can be set up by llRequestURL()
Defaults remains as 100.
This setting is per simulator instead of per region due to how the url script module is structured.
2012-06-16 03:32:47 +01:00
BlueWall 7c0843aad1 Add the updated OpenSimDefaults.ini for the prior timer_Interval patch. 2012-06-12 21:55:31 -04:00
Justin Clark-Casey (justincc) 08cd5d2503 Add documentation to AllowGodFunctions setting in [LL-Functions] 2012-06-09 00:33:17 +01:00
Talun 008c6a4610 Mantis 4597 AgentPaused packet is ignored.
The packet was actually being handled but not acted on.
This change extends the default timeout for paused clients to 5 minutes
and makes both the paused and non-paused timeout periods configurable.
2012-06-05 01:22:05 +01:00
Justin Clark-Casey (justincc) 0b02a4d42e Add an optional mechanism for physics modules to collect and return arbitrary stats.
If active, the physics module can return arbitrary stat counters that can be seen via the MonitoringModule
(http://opensimulator.org/wiki/Monitoring_Module)
This is only active in OdeScene if collect_stats = true in [ODEPhysicsSettings].
This patch allows OdeScene to collect elapsed time information for calls to the ODE native collision methods to assess what proportion of time this takes compared to total physics processing.
This data is returned as ODENativeCollisionFrameMS in the monitoring module, updated every 3 seconds.
The performance effect of collecting stats is probably extremely minor, dwarfed by the rest of the physics code.
2012-05-31 01:52:26 +01:00
PixelTomsen bc543c1797 Environment Module - allows Environment settings for Viewer3 warning: includes database region store migrations for mssql, mysql, sqlite
enable/disable this module:
Cap_EnvironmentSettings = "localhost" (for enable)
Cap_EnvironmentSettings = "" (for disable) at ClientStack.LindenCaps section (OpenSimDefaults.ini file)
 or owerwrite in OpenSim.ini

mantis: http://opensimulator.org/mantis/view.php?id=5860

Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2012-05-23 17:04:19 -04:00
Justin Clark-Casey (justincc) 9fa0577c7e Enable FetchInventoryDescendents2 and FetchInventory2 caps by default. This appears to be required now for LL 3.3.1 to work properly.
Without this, LL 3.3.1 continually pushes LLInventoryModelFetchDescendentsResponder::error 499 to its log.
This cap will be ignored by older viewers - UDP inventory will work normally.
2012-05-19 00:00:52 +01:00
Mic Bowman a2d544c938 Add a configuration switch to turn on/off the use of the trash
folder when deleting objects from a scene. The use of the trash
folder causes assets to be created and stored everytime you delete
an object from the scene (slows down the delete and adds mostly useless
assets to your database).

Default is on (use the trash folder) which is the standard behavior.
2012-04-25 11:54:57 -07:00
Mic Bowman 2d45ba47ac add configuration for jsonstore module, disabled by default 2012-04-17 13:55:00 -07:00
Justin Clark-Casey (justincc) 2b339bfd97 Correct max_listeners_per_region in OpenSimDefaults.ini to max_listens_per_region
Value for this setting in OpenSimDefaults.ini (1000) is same as setting in code (1000) so this should have no effect
Thanks to Ovi Chris Rouly for pointing this out.
2012-04-10 17:22:02 +01:00
Snoopy Pfeffer 7223b63563 User level based restrictions for HyperGrid teleports, asset uploads, group creations and getting contacted from other grids. Incoming HyperGrid teleports can also be restricted to local users. 2012-03-27 22:09:58 +02:00
Robert Adams 84c9bd52d3 BulletSim: update BulletSim binaries and configuration fixing a crash which happens when there are more than a few hundred physical objects. 2012-03-26 13:48:15 -07:00
Robert Adams ff54b3c366 BulletSim: change default of shouldDisableContactPoolDynamicAllocation from False to True. It seems that collisions don't happen well when it is False (things fall through terrain). 2012-03-23 15:50:32 -07:00
Robert Adams 142de1d02f BulletSim: add a bunch of internal Bullet configuration parameters to OpenSimDefaults.ini and the code. 2012-03-23 13:15:23 -07:00