packet can be pulled out of LLClientView and moved to
AvatarFactory. The first pass at reusing textures (turned off by
default) is included. When reusing textures, if the baked textures
from a previous login are still in the asset service (which generally
means that they are in the simulator's cache) then the avatar will not
need to rebake. This is both a performance improvement (specifically
that an avatars baked textures do not need to be sent to other users
who have the old textures cached) and a resource improvement (don't
have to deal with duplicate bakes in the asset service cache).
UnsafeQueueUserWorkItem is so called because it allows the calling code to escalate its security privileges.
However, since we must already trust this code anyway in OpenSimulator this is not an issue.
This option allows the simulator to specify that the cancel button on inter-region teleports should never appear.
This exists because sometimes cancellation will result in a stuck avatar requiring relog.
It may be hard to prevent this due to the protocol design (the LL grid has the same issue)
In small controlled grids where teleport failure is practically impossible it can be better to disable teleport cancellation entirely.
Existing map settings in [Startup] will continue to work, and if present will override anything in [Map]
However, the proper place for such settings would now be [Map]
This is to reduce the use of [Startup] as a bag for non-generic settings which should really go in sections, in common with other settings.
This commit also extends Diva's previous work to allow a default setting to be given when looking at multiple sections for settings.
invisible barriers in sculptie doorways (Mantis 6529).
Bump up level-of-detail for physical meshes to 32 (the max). This
fixes the invisible barriers that showed up in prim cut arches.
NOTE: the default LOD values are removed from OpenSimDefaults.ini.
If you don't change your OpenSimDefaults.ini, you will continue
to see the arch problem.
This setting controls whether scripts are stopped by aborting their threads externally (abort) or by co-operative checks from the compiled script (co-op)
co-op should be more stable but this option is experimental.
If moving from co-op to abort, existing script DLLs will need to be recompiled.
This currently can only be done manually, either by setting DeleteScriptsOnStartup = true for one run
or by deleting the script DLL* files in bin/ScriptEngines/<region-id>/
One can move from co-op back to abort without recompilation, but reverting back to co-op again will need script recompile
Default is 1000, as has previously been the case.
This parameter exists for further debug work concerning mono 2.10 crashes that may be related to locks not being removed on Thread.Abort
This reduces base memory churn of every client connection, improving the garbage collection situation.
The effect is a significant portion of base load (an avatar standing still on a completely blank island)
but will probably still be swallowed up by other memory use on active regions.
Tests have shown no noticeable impact on speed of processing incoming packets, though setting remains
in case a switch back is needed.
Setting this to false will block all restart requests from the viewer even if they are otherwise legitimate.
One use is to block region restarts if necessary whilst restart functionality remains buggy or triggers bugs in modules,
though these should be fixed as soon as practicable.
Default is true, as has been the case historically.
Simple attempt to make avatars better shaped.
Replace parameter 'avatarCapsuleRadius' with 'avatarCapsuleWidth'
and 'avatarCapsuleDepth'.
More tweeking to avatar height calculation. A little better but
short avatar's feet are above the terrain and tall avatar's feet
are a little below the ground.
This retrieves and caches information from the PresenceService to only send messages to online users.
This is reported to much improve performance for large groups where most users are offline.
Cache is 20 seconds to balance requests against users not receiving messages until cache updates.
This is an alternative to an approach where login/logout notification is sent directly from simulator to groups service.
However, I'm not convinced that this PresenceService approach is actually better. Needs more thought.
Even when an avatar is standing still, it's sending in a constant stream of AgentUpdate packets that the client creates new UDPPacketBuffer objects to handle.
This option pools those objects. This reduces memory churn.
Currently off by default. Works but the scope can be expanded.
Rearrangement and cleanup of shape collection code. Much more readable.
Enabling and use of collision filters and masks.
Addition of ID to body creation BulletSimAPI calls so always set in
shape for collision reporting.
Change default of ShouldSplitSimulationIslands and ShouldRandomizeSolverOrder
from 'false' to 'true'. When 'false', this suppresses NO_CONTACT_RESPONSE
which makes volume detect fail.
This controls how many undo steps the simulator will store for each prim.
Default is now 20 rather than 5 as it briefly was.
The default number could be increased through this is a memory tradeoff which will scale with the number of prims in the sim and level of activity.
This resends appearance uuids to avatars in the scene once a minute.
I have seen this help in the past resolve grey appearance problems where viewers have for unknown reasons sometimes ignored the packet.
The overhead is very small since only the UUIDs are sent - the viewer then requests the texture only if it does not have it cached.
This setting will not help with cloudy avatars which are usually due to the viewer not uploading baked texture data or uploading something that isn't valid JPEG2000
Fix inconsistencies between configuration parameter names and their description names. Changing the configuration parameters for non physical prim size min-max from Nonphys* to NonPhys*.
Please update your OpenSim.ini and Regions.ini to reflect these changes.
Viewer LL 3.3.4 and before sometimes fail to properly redisplay dynamic textures that have a small data length compared to pixel size when pulled from cache.
This appears to happen when the data length is smaller than the estimate discard level 2 size the viewer uses when making this GetTexture request.
This commit works around this by always regenerating dynamic textures that fall below this threshold rather than reusing them if ReuseDynamicTextures = true
This can be controlled by the [Textures] ReuseDynamicLowDataTextures config setting which defaults to false.
If true, this setting reuses dynamically generated textures (i.e. created through osSetDynamicTextureData() and similar OSSL functions) where possible rather than always regenerating them.
This results in much quicker updates viewer-side but may bloat the asset cache (though this is fixable).
Also, sometimes issue have been seen where dynamic textures do not transfer to the viewer properly (permanently blurry).
If this happens and that flag is set then they are not regenerated, the viewer has to clear cache or wait for 24 hours before all cached uuids are invalidated.
CUrrently experimental. Default is false, as before.
Add description and default of false (as before) to OpenSimDefaults.ini
If set to true, this config switch will resend avatar appearance information (a small amount of UUID data, not the baked textures themselves) to other avatars in the sim every 60 seconds.
For me, this has helped with situations where avatars appear persistently grey - the LL viewer sometimes did not appear to request assets the first time the appearance data was sent.
However, this switch will not help with other appearance failure situations (e.g. failure to bake assets).
This setting is experimental but will not have any significant impact on the simulator if turned to true.
and into its own class. The BulletSim data structures track
individual prims as linksets of 1 so most of the prim code is not
different between a linked and unlinked object.
The packet was actually being handled but not acted on.
This change extends the default timeout for paused clients to 5 minutes
and makes both the paused and non-paused timeout periods configurable.
If active, the physics module can return arbitrary stat counters that can be seen via the MonitoringModule
(http://opensimulator.org/wiki/Monitoring_Module)
This is only active in OdeScene if collect_stats = true in [ODEPhysicsSettings].
This patch allows OdeScene to collect elapsed time information for calls to the ODE native collision methods to assess what proportion of time this takes compared to total physics processing.
This data is returned as ODENativeCollisionFrameMS in the monitoring module, updated every 3 seconds.
The performance effect of collecting stats is probably extremely minor, dwarfed by the rest of the physics code.
Without this, LL 3.3.1 continually pushes LLInventoryModelFetchDescendentsResponder::error 499 to its log.
This cap will be ignored by older viewers - UDP inventory will work normally.
folder when deleting objects from a scene. The use of the trash
folder causes assets to be created and stored everytime you delete
an object from the scene (slows down the delete and adds mostly useless
assets to your database).
Default is on (use the trash folder) which is the standard behavior.
Value for this setting in OpenSimDefaults.ini (1000) is same as setting in code (1000) so this should have no effect
Thanks to Ovi Chris Rouly for pointing this out.
If velocity reaches 256 in any vector then bad things happen with ODE, so we now clamp this value.
In addition, a falling avatar is clamped by default at 54 m/s, which is the same as a falling skydiver.
This also appears to be the value used on the linden lab grid.
This should resolve http://opensimulator.org/mantis/view.php?id=5882
Naturally, default is true.
When set to false, "phantom" flags on prims can be set as usual but all prims remain phantom.
This setting is for test purposes.
This switch does not affect the collision of avatars with the terrain.
Enabling this by setting Cap_FetchInventoryDescendents2 = "localhost" in the [ClientStack.LindenCaps] section of OpenSim.ini downloads inventory via http rather than udp in later viewers.
From field experience, we know that simulators can be unstable if a user logs in before the scripts have finished loading.
This commit turns login_disable = true in [RegionReady] on by default which prevents this from happening.
If you want the old behaviour, please copy these section from OpenSimDefaults.ini into OpenSim.ini and set login_disable = false
This is to allow broader subsitution in the future. Currently, the only substitions are \R (for region name) and \\ (for a single backslash)
e.g. "Region (\R) " is the current and continuing default prompt
This renames custom_prompt in [Startup] to ConsolePrompt
PARCEL_GROUP, PARCEL_OWNER, ESTATE_MANAGER and REGION_OWNER can be combined with the existing agent uuid option to limit ossl functions to agents and owner classes.
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
As discussed in http://lists.berlios.de/pipermail/opensim-dev/2011-October/010599.html and the preceeding thread mails,
the aim of this setting is to avoid overloading the viewer UDP connection where the client is failing to ack packets.
Please mantis any anomalous viewer connection behaviour which wasn't there before.
This had stopped working. However, at the moment it still allows the physics flag to be set even though this has no effect. This needs to be fixed.
Default for this flag is true as previously.
This exactly fits five ODE steps in the default frame time (0.089).
This means that ODE execution time now matches the default minimum frame time.
This eliminates errors between distance travelled as calculated by ODE in clear air and simple extrapolation.
On the old values, ODE would actually do calculations over 0.1 seconds rather than 0.089.
This means that once the avatar is at top speed, no additional packets need to be sent for smooth movement, since no error develops between server and viewer.
This approach replaces the tweaks previously discussed on the opensim-dev mailing list
Robert Adams