21d8a6b0e8
extend move test to check one beat of the simulator without actually asking the npc to move.
2011-08-03 23:06:18 +01:00
d78fe44191
Add passing but incomplete NPC move regression test
2011-08-03 22:51:46 +01:00
e0503d397c
stop avatar service being set up in NPC TestCreate() - it's no longer used
2011-08-03 22:45:43 +01:00
a333c60f28
refactor: rename the move to position methods to move to target to be consistent with terminology used by scene object part and elsewhere
2011-08-03 22:34:05 +01:00
2964467708
get rid of vestigal move to parameters
2011-08-03 22:11:05 +01:00
b7a3f36c65
enable the NPC module for its regression test
2011-08-03 04:48:47 +01:00
c1c0d780ee
correct config comments mistakes
2011-08-03 04:36:25 +01:00
797def8aa4
Put config to enable disable [NPC] module.
...
Default is disabled. You will need to explicitly enable to toy with this.
2011-08-03 04:33:45 +01:00
6e4ec29722
Do a partial fix/implementation of OSSL osNpcMoveTo()
...
Avatar moves and stops. However, will stop in mid stride.
And if the move to position is in the air, avatar will continue to make vain and quite hilarious attempts to take off (but never doing so).
Clearly more work is needed.
2011-08-03 04:19:19 +01:00
68a5fe0431
Improve z axis move to/autopilot so the avatar does alternative crouch/huzzah when walking along the ground
...
Moving a flying avatar to a ground point doesn't yet land the avatar. This may or may not be the best thing
2011-08-03 02:59:49 +01:00
30e816bfa2
Implement move to/autopilot for z axis movement as well.
...
This is jerky (an artifact of the way it's being done, I think), but it's better than on implementation.
2011-08-03 02:04:38 +01:00
0c23764ce2
get autopilot/go here to work immediately.
...
This works with viewer 1.23.5 and so in theory should work with libopenmetaverse.
2011-08-03 01:12:32 +01:00
1c126e6e22
refactor: Move update_movement_flag and the final check inside the m_allowMovement if in HandleAgentUpdate() since it's logically only ever used there
2011-08-03 00:55:52 +01:00
f9689f5cc9
refactor: move out code from HandleAgentUpdate() which processes updates to move to a set position
...
Also comment out the really spammy log message I accidentally left in on the last commit.
2011-08-03 00:46:46 +01:00
74b23210a7
Fix Flotsam cache so it will use the disk cache if the memory cache is enabled
2011-08-02 23:44:40 +01:00
c122489e09
Partially fix autopilot/go here
...
This now works again except that it requires a click or avatar mvmt to get going
This is because the ScenePresence.HandleAgentUpdate() method doesn't trigger until the client does something significant, at which point autopilot takes over.
Even clicking is enough to trigger.
This will be improved presently.
2011-08-02 23:41:12 +01:00
b7f81d3492
If GetRegionByName can't match something in the local db, then search the hypergrid if that functionality has been enabled.
...
This should fix the problem today where old style HG addresses (e.g. "hg.osgrid.org:80:Vue-6400") stopped working since 8c3eb324c4
2011-08-02 01:06:32 +01:00
d2220da205
remove ancient late 2008 cruft that handles the situation where the GetRegionsByName used to not be implemented/returned null.
...
It's impossible that anybody is still running this since the infrastructure has changed massively since that time.
2011-08-02 00:58:08 +01:00
17e9d61f43
Change GridService.GetRegionByName() to only return info if there is an exact region name match, unlike GetRegionsByName()
...
This should fix the first part of http://opensimulator.org/mantis/view.php?id=5606 , and maybe 5605.
Thanks to Melanie for helping with this.
2011-08-02 00:52:48 +01:00
e6fb9d74ef
Revert "In GridService, have GetRegionByName() call GetRegionsByName() with a max return of 1 instead of duplicating code."
...
This reverts commit 8d33a2eaa1
2011-08-02 00:40:23 +01:00
8d33a2eaa1
In GridService, have GetRegionByName() call GetRegionsByName() with a max return of 1 instead of duplicating code.
...
This also fixes the problem where this method would not return a hypergrid region, unlike GetRegionsByName()
2011-08-02 00:26:17 +01:00
b6ac1c46cd
Get rid of AvatarAppearance.Owner to simplify the code.
...
This is not used for anything - appearances are always properties of objects with ids (ScenePresence, AgentCircuitData) and just has the potential to get out of sync when the appearance is cloned.
2011-08-02 00:13:04 +01:00
59f548cda8
Get osNpcCreate appearance working with avatars that are currently in the scene.
...
Had to stop using AvatarService for now since it doesn't store baked texture IDs (which is why this was failing).
Also failing because cloning appearance was also cloning the AvatarApperance.Owner field, which we weren't then changing.
Extended TestCreate() to check this.
2011-08-01 23:41:29 +01:00
05e94ff27e
Move common gemo/agent map name code into CreateGeom()
...
Fix build break.
2011-08-01 07:04:13 +01:00
f9d6a91252
Instead of preserving old name in geom_name_map in change size or shape, use the Name property instead.
...
This is equivalent since the prim 'name' is never changed. In fact, this propery is never used for prims
2011-08-01 06:52:52 +01:00
40a78db182
comment out unused code in OdeScene.TriCallback()
2011-08-01 06:47:45 +01:00
ccb4b76242
On geom removal, remove the name from the OdeScene.geom_name_map too
2011-08-01 06:40:29 +01:00
f79df6f43f
remove the unused ODEPrim.prev_geom field
2011-08-01 06:35:59 +01:00
f32dbef647
When an ODE geom is removed (as when a non-phantom prim is deleted, resized or shape changed, also remove the OdeScene.actor_name_map entry pointing to the phys actor
...
This is to stop a small memory leak over time when prims are deleted or phantom-toggled
2011-08-01 06:32:30 +01:00
6618948ff9
refactor: centralize prim geom removal code from four places to one
2011-08-01 06:15:02 +01:00
509200d5cd
minor: add note to RemovePrimThreadLocked() to the effect that it contrary to the summary, it is being called from within Simulate() lock (OdeLock)
2011-08-01 05:48:27 +01:00
dfa2f7d715
If a prim changes size or shape, add actor to _parent_scene.actor_name_map with new prim_geom key, as the old one becomes invalid.
...
This resolves http://opensimulator.org/mantis/view.php?id=5603 where changing size or shape would stop collision_start being fired in a running script.
In both this and existing code we are not removing old actors from actor_name_map when the existing prim_geom is removed, which leads to a small memory leak over time.
This needs to be fixed.
2011-08-01 05:43:04 +01:00
2102964826
minor: indentation correction
2011-08-01 05:14:16 +01:00
b757583662
Comment out SOP logging message I accidentally left in
2011-07-31 03:41:35 +01:00
aea7007533
refactor: split out ninja joint part of SOP.DoPhysicsPropertyUpdate() so that we don't have to look at it if it's not relevant
2011-07-31 02:50:50 +01:00
450bdb3657
In the packetpool, if we encounter a data block that somehow wasn't retrieved via GetDataBlock() then create a new stack instead of throwing an exception
2011-07-31 02:30:40 +01:00
d041276517
Remove _mesh field since the mesh data no longer needs to be stored after it's initially used.
...
This may improve memory usage for regions using mesh and sculpts, though I suspect that it doesn't address the current memory leak.
2011-07-31 01:03:52 +01:00
bd8f538f80
refactor: Remove argument to pass in an initial mesh to OdePrim since this is no longer required and it prevents removal of the _mesh field (which is only used temporarily)
...
If passing in a mesh becomes important again in the future then this can be reinstated.
2011-07-31 00:49:49 +01:00
196a774b24
minor: correct method doc for last commit
2011-07-31 00:45:20 +01:00
454312f5bc
refactor: rename CreateGeom _mesh argument to mesh, so as to not confuse this with the pre-existing _mesh field
2011-07-31 00:44:23 +01:00
f1ce17071d
minor: method doc
2011-07-31 00:43:02 +01:00
e08be91c84
Refactor: Replace instances of m_isphysical with IsPhysical rather than have some code reference the private var and other the public var without any functionality difference.
...
Add some method doc to IsPhysical
2011-07-30 23:44:47 +01:00
4f4d080461
refactor: Rename ODEPrim.ParentPrim() to AddChildPrim() for code readability
2011-07-30 23:20:43 +01:00
49a3740ee9
minor: remove mono compiler warnings, some code spacing adjustments
2011-07-30 03:56:29 +01:00
9fc59e2bf2
minor: remove some mono compiler warnings
2011-07-30 03:19:00 +01:00
d917010433
minor: Add method doc to collision subscription methods. Change method case to reflect OpenSim standards.
2011-07-30 03:11:36 +01:00
310a685220
refactor: extract method that generates a physics mesh from prim shape data
2011-07-30 02:34:50 +01:00
4197f66052
refactor: extract code which generate points and faces from sculpt data into it's own method.
...
fix build break.
2011-07-30 02:22:05 +01:00
b0eacadeb4
fix bug in previous commit
2011-07-30 02:09:17 +01:00
122e01949d
refactor: move the code that generates physics meshs from prim mesh data into a separate method, in order to make the code more readable.
2011-07-30 02:08:32 +01:00
Justin Clark-Casey (justincc)