84ad23234b
add SP.PhysicsActor checks to other sit/stand tests
2011-11-11 23:33:55 +00:00
acaf6937c5
add sit and stand on ground test
2011-11-11 23:32:43 +00:00
a3052e40ad
extract ground sit code into SP.HandleAgentSitOnGround() for consistency with other sitting code.
2011-11-11 23:28:32 +00:00
6ce3daff94
Pick up the intended ConsolePrompt from [Startup] instead of console_prompt.
...
Addresses http://opensimulator.org/mantis/view.php?id=5786
2011-11-11 23:15:53 +00:00
2a2cdaa211
As with prim sitting avatars, make an avatar phantom when it sits on the ground and solid again when it stands.
...
This is to avoid http://opensimulator.org/mantis/view.php?id=5783 when a collision with a ground sitting avatar causes that avatar to automatically stand and sometimes not be able to move
A better solution may be to keep gound sitting avatars solid but remove their collision status. However, this requires some physics code work.
2011-11-11 23:10:43 +00:00
ce8441132e
Restore sending of OutPacket() for object kills removed in commit c7dd7b1.
...
OutPacket() must be called within the m_killRecord lock. Otherwise the following event sequence is possible
1) LLClientView.ProcessEntityUpdates() passes the kill record check for a particular part suspends before OutPacket()
2) Another thread calls LLClientView.SendKillObject() to delete the same part and modifies the kill record
3) The same thread places the kill packet on the Task queue.
4) The earlier thread resumes and places the update packet on the Task queue after the kill packet.
This results in a ghost part in the sim that only goes away after client relog.
This commit also removes the unnecessary m_entityUpdates.SyncRoot locking in SendKillObject.
2011-11-11 22:37:57 +00:00
2a7f4e0602
remove unncessary IClientAPI parameter from SP.SendSitResponse()
2011-11-11 21:53:00 +00:00
b1cb4f5b04
As per mailing list last week, remove facility that would automatically move the avatar if prim with no sit target was out of sitting range.
...
Now, no movement occurs.
Note that you can still sit on a prim with an explicit sit target from any distance, as was the case before.
2011-11-11 21:42:58 +00:00
a658bddbcd
Bump warp sit distance up to 10 meters, as discussed on opensim-dev mailing list last week.
...
This means that if the avatar is within 10 meters of the selected target, it sits on it immediately without walking.
Existing autopilot outside this range will be disabled in a later commit
2011-11-11 19:59:12 +00:00
01518de0bf
update minimum mono version
2011-11-11 19:43:42 +00:00
8f4955f6a9
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-11-11 19:40:31 +00:00
dc200d7bb5
Add new ScenePresenceSitTests with a single sit/stand test
2011-11-11 19:38:36 +00:00
ad28238ece
one more jenkins test!
2011-11-10 21:40:11 -07:00
84ce0b487b
one more test of jenkins!
2011-11-10 21:31:06 -07:00
53528b0372
one more round with leeeeeeeeeeroy jaaaaaaenkins!
2011-11-10 21:22:07 -07:00
de24e93a1f
take two on jenkins testing!
2011-11-10 20:58:38 -07:00
621fb9aba0
test push to see if sir jenkins responds!
2011-11-10 20:54:33 -07:00
10e664eedc
Fix compile error from an earlier commit
2011-11-10 17:37:33 -08:00
7432ca6daf
Merge branch 'master' of git://opensimulator.org/git/opensim
2011-11-10 17:21:49 -08:00
96c59156a7
In SOP, replaced many references to private members with the public properties
2011-11-10 17:21:37 -08:00
a5838cf0a6
Prevent linking objects while they are deeded. On unlinking deeded objects,
...
set LastOwnerID properly so the parts cannot be transferred, circumventing
no trans perms
2011-11-11 00:28:12 +00:00
2bd4eaeb19
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2011-11-10 23:43:29 +00:00
0daece6f2b
Fix turn left and turn right properly. Works for both built-ins and LSL AOs
2011-11-10 23:42:48 +00:00
8fbaa10ade
Merge branch 'master' of git://opensimulator.org/git/opensim
2011-11-10 15:23:16 -08:00
9359293b11
Cleaned UpdatePermissions calls on SOP and SOG to eliminate redundant properties packet sends and so one part is not telling a different part what to do. That should be up to the SOG to manage permissions on its parts and notify clients when one of them changes.
2011-11-10 15:20:21 -08:00
f5abae5ac6
Implement nudging support for strafing motion
2011-11-10 23:03:05 +00:00
c0d280d948
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-11-10 22:58:24 +00:00
2d4ac6288d
Alter commit 3758306 to allow region name to be substituted within a region console prompt
...
This is to allow broader subsitution in the future. Currently, the only substitions are \R (for region name) and \\ (for a single backslash)
e.g. "Region (\R) " is the current and continuing default prompt
This renames custom_prompt in [Startup] to ConsolePrompt
2011-11-10 22:56:13 +00:00
f3fea81936
Merge branch 'master' of git://opensimulator.org/git/opensim
2011-11-10 14:09:53 -08:00
18c625bda6
When updating SOG, a physics taint should not override a full update with a terse update
2011-11-10 14:09:35 -08:00
b990914ec4
convert tabs from commit 3758306 to spaces
2011-11-10 21:04:12 +00:00
444b345cdf
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2011-11-10 20:54:44 +00:00
48d2300b8a
Fix misaligned sit animation on scripted sit caused by the default sit
...
animation being run after the scripted one.
2011-11-10 20:54:15 +00:00
9cba179dff
launch pCampbot shutdown console comand asynchronously
2011-11-10 20:03:36 +00:00
f31a58bd99
Remove unused index parameter from BotManager.startupBot(). Rename startupBot() => StartBot()
2011-11-10 19:40:45 +00:00
ce4560bf8f
Add GuduleLapointe to list of contributors
...
Thanks for the patches!
2011-11-10 07:26:16 -05:00
37583063ee
Allow custom setting for the console prompt
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-11-10 06:56:32 -05:00
4f6915bad5
minor: Correct misleading method doc on SOG.UpdateRootRotation()
2011-11-09 21:49:08 +00:00
bbab7b6b4d
Use IsConnected status to determine whether all pCampBots have disconnected, rather than maintaining a separate count
...
Checking IsConnected is more reliable.
2011-11-09 21:23:23 +00:00
674b521fdd
In pCampBot, don't try and pull down Primitive faces or sculpts set to null
2011-11-09 20:21:48 +00:00
d9b0d7e752
one final attempt and then im giving up on panda!!!!!
2011-11-07 19:03:09 -07:00
4f7fe58af8
yet another feeble attempt at understanding panda shmanda!
2011-11-07 18:15:21 -07:00
554d2ddc03
another shot at making panda use mono 2.4.3!!
2011-11-07 17:49:05 -07:00
5d8205f170
another panda test for good measure!
2011-11-07 17:39:08 -07:00
c081d7b7dd
This is a test to make sure new mono is being used with panda!
2011-11-07 17:09:32 -07:00
7e488cd635
Remove unused avariable in PollServiceRequestManager
2011-11-07 23:24:13 +00:00
39b967e214
Correct test failure in sit position check of TestSitAndStandWithNoTarget()
...
Curiously, a Vector3.ToString() will not display the last two places of the float. In this case, the failure of
the assertion would confusingly report Expected: <0, 0, 0.8454993> But was: <0, 0, 0.8454993> when actual Z figure is 0.845499337
Should fully address http://opensimulator.org/mantis/view.php?id=5779
2011-11-07 22:53:52 +00:00
6d92d65140
That such a trivial change can be so difficult to get right. Fix it this time.
2011-11-07 02:40:35 +00:00
e775b3fc47
Fix build break
2011-11-07 02:03:17 +00:00
67780b00f0
Fix up failing test to compensate for changed sit target offset
2011-11-06 21:47:12 +00:00
Justin Clark-Casey (justincc)