7ab633461e
Fixed merge conflicts
...
Clean up of simulation version, the number that rules the compatibility of teleports:
- It's not configurable anymore, it's fixed in code. Each number means an increase in features of the teleport procedure
- Its definition moved to the global VersionInfo class
As of now it's still 0.3.
Conflicts:
OpenSim/Region/CoreModules/Framework/EntityTransfer/EntityTransferModule.cs
2015-10-18 16:24:33 -07:00
70a46fe090
Clean up of simulation version, the number that rules the compatibility of teleports:
...
- It's not configurable anymore, it's fixed in code. Each number means an increase in features of the teleport procedure
- Its definition moved to the global VersionInfo class
As of now it's still 0.3.
2015-10-18 16:06:31 -07:00
40dc2541ff
change opensim.ini.example to reflect the changes to npc creation options
2015-10-08 02:45:24 +01:00
feb78b2910
add several options for NPC creation so abusive use can be reduced (restrictive by default) UNTESTED
2015-09-30 02:45:11 +01:00
3bad55e1ef
remove file OpenSimDefaults.ini.example no longer in use in master
2015-09-14 23:52:35 +01:00
67984ca273
remove coment asking to check ODEPhysicsSettings section. That was because of diferent setting for av_density for ubODE no longer needed
2015-09-14 23:47:05 +01:00
c2b05da4af
add missing dll config file for linux
2015-09-14 18:48:54 +01:00
caf298cda3
add entries the the ini.example files for ubODE
2015-09-12 21:46:40 +01:00
3780e98d36
more on compile..
2015-09-08 18:54:40 +01:00
e5367d822b
Merge of ubitworkvarnew with opensim/master as of 20150905.
...
This integrates the OpenSim refactoring to make physics, etc into modules.
AVN physics hasn't been moved to new location.
Does not compile yet.
Merge branch 'osmaster' into mbworknew1
2015-09-08 04:54:16 -07:00
3a72e755b9
Deleted access control spec from [LoginService] section of standalone config. It's in OpenSim.ini now under [AccessControl]. Backwards compatibility preserved.
2015-09-06 10:02:16 -07:00
82ea4179da
Clean up viewer-based access control specifications.
2015-09-06 10:00:20 -07:00
371c9dd2af
bad merge?
2015-09-01 14:54:35 +01:00
11194209df
First commit where physics work as region module.
...
Moved all physics dlls out of Physics and into bin directly, so they can be found by the module loader.
Removed call to PhysicsPluginManager.
2015-08-31 14:09:15 -07:00
e64f7abd6c
Restore FlotsamAssetCache as default and pre-enabled asset cache module
...
Keep FlotsamAssetCache as default and pre-enabled asset cache module in
StandaloneCommon.ini./example to have common behaviour between grids and
standalones. Asset cache is needed to better support temporary assets
and texture drawing functions.
2015-08-26 16:33:32 +02:00
0540e25081
Still about Ai's patch: it turns out OpenSim doesn't work well without an asset cache because of temporary assets. So setting the default asset cache to Cenome, which is the in-memory cache.
2015-08-25 21:32:38 -07:00
9b5bd4b279
Fixed comment in ini related to previous patch
2015-08-25 20:43:22 -07:00
9d104f5453
Changes to .ini.example files to improve instructions and workflow for standalone setups
...
Clarify what must be changed in initial .ini files to create a working
standalone setup now that [Const] variables are used. Fix separator used
in one of choice lists for [Const] BaseURL descriptor. Minor changes to
line spacing of some sections in StandaloneCommon.ini.example file for
layout regularity. Correction of a typo in comment.
Signed-off-by: Diva Canto <diva@metaverseink.com>
2015-08-25 20:42:02 -07:00
1dae36ff7b
Revert "update libomv managed dlls to 49a5cf05c32e - fresh clone default settings release mode VS 2015 community edition"
...
This reverts commit 4f8e18e31c
2015-08-23 15:31:25 -07:00
4f8e18e31c
update libomv managed dlls to 49a5cf05c32e - fresh clone default settings release mode VS 2015 community edition
2015-08-23 15:16:31 -07:00
3a27b47593
Refine comments .ini file setup for new Standalone
...
Helpful comment for setting [const] section of OpenSim.ini to allow for
standalone. Correction to StandaloneCommon.ini.example as
[GridInfoServices] welcome parameter does work and is also useful for
standalones.
2015-08-21 18:42:21 +02:00
1bfdc9f32b
Update libomv managed dlls to 49a5cf05c32e
2015-08-14 16:55:06 -07:00
959872315f
WARNING: massive refactor to follow libomv's latest changes regarding inventory folders. The newest version of libomv itself is committed here. Basically, everything that was using the AssetType enum has been combed through; many of those uses were changed to the new FolderType enum.
...
This means that from now on, [new] root folders have code 8 (FolderType.Root), as the viewers expect, as opposed to 9, which was what we had been doing. Normal folders are as they were, -1. Also now sending folder code 100 for Suitcase folders to viewers, with no filter.
All tests pass, but fingers crossed!
2015-08-08 12:12:50 -07:00
f218cbd29d
max-agent-groups support
...
Robust now tells viewers what the maximum number of groups is. Viewers show this limit to the users, and enforce it.
The default is 42, which is what viewers had assumed was the maximum number before this update.
Signed-off-by: Oren Hurvitz <orenh@kitely.com>
2015-08-07 07:42:26 +01:00
86c426e587
create osGetAvatarHomeURI
...
Signed-off-by: Melanie Thielker <melanie@t-data.com>
2015-08-04 18:09:13 +02:00
971d57644f
Fix a typo in my previous changes to robust.ini example files with regards to the FSAssets config.
2015-07-30 18:58:44 +01:00
965f94e30f
Add LogFile option in OpenSimDefaults.ini. It was omitted accidentally
2015-07-26 04:54:46 +02:00
3e90d28d33
Robust config loader does not support config includes. Replace these additions for FSAssets with direct options in robust.ini example files instead.
...
As suggested by Orenh in mantis 7644, in the future it would be beneficial and less confusing to use only 1 of the 3 current config loaders.
Signed-off-by: Oren Hurvitz <orenh@kitely.com>
2015-07-22 18:28:33 +01:00
31a216af70
Added the thread name to the logs
...
This helps debug synchronization problems
2015-07-22 19:45:18 +03:00
a7543a3391
Add config options for FSAssetService. The default is the original asset service.
...
Signed-off-by: Melanie Thielker <melanie@t-data.com>
2015-07-13 19:04:45 +02:00
e99be0bb19
Fix my typo, the dll is named OpenSim, not Opensim
...
Signed-off-by: Diva Canto <diva@metaverseink.com>
2015-06-21 08:43:41 -07:00
7edaf1d851
Add MaxMaterialsPerTransaction to SimFeatures
...
Signed-off-by: Diva Canto <diva@metaverseink.com>
2015-06-19 08:44:34 -07:00
53502e8694
Added example of how to configure the GodNames module
2015-06-13 14:41:50 -07:00
bcb8a7d7f9
A few bug fixes for Agent Preferences to actually work. Also added missing config for standalone.
2015-06-13 08:36:06 -07:00
0fa94f222d
Refactor AgentPreferences so that database operations happen centrally. the opensim way.
...
Signed-off-by: Diva Canto <diva@metaverseink.com>
2015-06-13 07:27:42 -07:00
fe116b6af7
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2015-06-11 11:31:44 -07:00
254a1e0f98
Restoring ICSharpCode.SharpZipLib.dll to what it was before, as it seems to have been inadvertently replaced in commit edcba95ab5
2015-06-11 11:31:21 -07:00
6a6c5942fa
Update libomv to current HEAD f75dccc313f3
2015-06-10 00:39:33 -07:00
897c7e1bda
Improve configuration description for llCastRay V3.
...
Signed-off-by: Michael Cerquoni <nebadon2025@gmail.com>
2015-06-01 13:09:21 -04:00
22e0367203
Add an entry for osGetGender to config-include/osslEnable.ini. Thanks to Austin Tate for the suggestion.
2015-05-30 15:10:21 -07:00
d271151504
fix file perms and change AllowLightshareFunctions to AllowLightShareFunctions
2015-05-25 20:52:27 -04:00
defc9c1d86
fix permmission issue on OpenSimDefaults.ini
2015-05-22 01:22:17 -04:00
fdc383a843
Use own mesh cache in llCastRay V3 after throttling.
...
Signed-off-by: Michael Cerquoni <nebadon2025@gmail.com>
2015-05-22 01:21:50 -04:00
7d26815d0e
Throttle llCastRay V3.
...
Signed-off-by: Michael Cerquoni <nebadon2025@gmail.com>
2015-05-22 01:21:18 -04:00
edcba95ab5
Merge branch 'master' into moses
...
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.cs
2015-05-20 23:40:52 +02:00
140ea04b9d
Merging Opensim upstream before generating patch
2015-05-19 15:18:45 -04:00
7566d22a18
update libomv to 6b8afb2b61d3
2015-05-12 22:54:53 -07:00
d348f87161
Patch llCastRay fully simplified to V3.
2015-05-12 15:40:42 -07:00
923a57a91f
Added tests for UserAccountService in Robust. In the process fixed a couple of bugs in the network connectors. For some reason the robust-bound code had a CreateUser method, while the client-bound code had no such method. I assume someone is extending the client-side code with their own connectors. I added the missing method, but didn't add it to the service interface.
2015-05-11 19:55:23 -07:00
3df472f10d
Added inventory tests to Robust.Tests.
2015-05-11 08:52:12 -07:00
eb9b16d284
Added simple test for IM in Robust too.
...
Changed Inventory data to use the mock one in Common Tests. (but still not inventory tests)
2015-05-10 21:49:24 -07:00
c2cf22ea4f
Added the beginning of a new test framework for robust connectors and services. For now, just Grid and Presence. This framework starts a robust server (as a thread) listening on a port in localhost, then the tests are client code.
2015-05-10 21:04:46 -07:00
44b8b9fef6
Revert "Patch llCastRay fully-simplified to V2." for further review.
...
This reverts commit c96ee68953
2015-05-04 16:23:16 -04:00
c96ee68953
Patch llCastRay fully-simplified to V2.
...
Signed-off-by: Michael Cerquoni <nebadon2025@gmail.com>
2015-05-04 12:44:58 -04:00
df12fbb0d2
add new config parameters for llCastRay to OpenSimDefaults.ini
2015-05-04 00:32:22 -07:00
43b8bd0c35
Implement llCastRay fully, simplified.
2015-05-03 23:41:11 -07:00
30f9e5372e
Only send parcel layer data around the point of interest. Can be disabled
...
by setting [LandManagement]LimitParcelLayerUpdateDistance=false
New parameters added to OpenSimDefaults for the distance and enablement.
2015-05-03 21:56:41 -07:00
0303112dcb
Added new [Statistics] config section to go with the previous patch.
2015-04-29 18:42:20 -07:00
2e7ace4e25
Readded file to repository. Acciedently removed.
2015-04-21 18:42:30 -04:00
9822692c12
Phase 2 additons with Frame Dilation metric.
...
Test Plan: Compiles and runs successfully.
Reviewers: szielinski
Reviewed By: szielinski
Differential Revision: http://cr.irl.ucf.edu/D268
2015-04-21 16:59:43 -04:00
1959eb8372
Moved over metrics from previous OpenSim 0.8.0.3 repository (this new repository is now the master branch from OpenSim).
2015-04-21 14:29:17 -04:00
263db44129
Implement llGetBoundingBox fully.
...
Signed-off-by: Michael Cerquoni <nebadon2025@gmail.com>
2015-04-20 16:23:34 -04:00
67d4e4475f
Small fix for ini comments
2015-04-15 15:55:47 -04:00
e4e58fad32
Enable OSSL functions by default using the osslEnable.ini configuration file.
...
This changes OpenSim.ini.example to, by default, include osslEnable.ini which
turns on the OSSL functions and limits who can do which operations.
2015-04-14 07:17:54 -07:00
520e6ed6f3
Remove ossl settings in XEngine section of OpenSim.ini.example with note to where
...
they were moved. At the moment, ossl settings are in the XEngine section although
they should apply to any LSLish script engine. Moves all ossl settings to osslEnable.ini
Update osslEnable.ini with more decriptive comments and set some functions to be more
restrictive -- especially the functions that allow scripts to do things to other
avatars and prims.
2015-04-14 06:18:25 -07:00
d96d31be45
Add warnings in osslEnable.ini about use of osAvatarPlayAnimation which forces animations
...
on avatars without requesting user permission.
2015-04-12 19:32:06 -07:00
2a302d9a32
Move osslEnable.ini file from bin/ to bin/config-include.
...
Per comments, putting new configuration files in bin/ is not preferred.
Add comments and instructions to heading of osslEnable.ini.
Add a commented out include of osslEnable.ini to OpenSim.ini.example.
Fix line endings of osslEnable.ini to be Unix style.
2015-04-12 16:00:54 -07:00
01a6ce2baa
Add the missing commas to parcel parameter setting in osslEnable.ini
2015-04-12 08:00:46 -07:00
d5ed6493d9
Add 'osslEnable.ini' file which enables a restricted set of ossl functions.
...
An 'include' in OpenSim.ini would enable the ossl functions but, for the moment,
the functions are still disabled by default and this file is an example
of what could be done.
2015-04-11 22:07:16 -07:00
441d77b5b6
For the public-facing Hypergrid asset and inventory services, override a general AuthType setting with None in Robust.HG.ini.example
...
This is necessary because both asset and inventory reuse generic connectors that will otherwise set up authentication configured in the [Network] section.
This allows one to set up authentication for private services whilst still being able to use asset and inventory on foreign grids.
The setting is AuthType = None in both [HGAssetService] and [HGInventoryService]
Private grid asset and inventory services will still set up the authentication as configured.
2015-03-13 23:01:50 +00:00
b9c384fc3c
Add rough and ready element explanation in a comment at the top of inventory library items xml
2015-03-11 23:12:21 +00:00
db24cf5322
Add required wearable flags values to inventory body parts and clothing example xml
2015-03-11 23:04:39 +00:00
b333a19102
minor: Remove unnecessary quoting in Regions.ini.example
2015-03-11 22:46:11 +00:00
921f4f9500
minor: Change InternalAddress in Regions.ini.example from 127.0.0.1 to more normal 0.0.0.0
2015-03-11 22:44:26 +00:00
3255335c42
Make private services forbid llHTTPRequest() calls by rejecting those that have the X-SecondLife-Shard header.
...
If you need to enable this, set AllowHttpRequestIn = true in [Network] for all private services or individual [*Service] sections.
2015-03-04 18:27:51 +00:00
7d3bafd5ab
Add outbound URL filter to llHttpRequest() and osSetDynamicTextureURL*() script functions.
...
This is to address an issue where HTTP script functions could make calls to localhost and other endpoints inside the simulator's LAN.
By default, calls to all private addresses are now blocked as per http://en.wikipedia.org/wiki/Reserved_IP_addresses
If you require exceptions to this, configure [Network] OutboundDisallowForUserScriptsExcept in OpenSim.ini
2015-03-04 18:27:50 +00:00
7b9ad11a98
BulletSim: update the OSX BulletSim binary to the latest sources in
...
opensim-libs.
2015-02-21 14:27:01 -08:00
85133daae0
minor: Add explanation that [Startup] CombineContiguousRegions should be false for varregions.
2015-02-19 21:47:02 +00:00
f62008f728
BulletSim: bring the BulletSim dll's and so's up to date with
...
the sources in the 'libs' source repository. No functional changes.
2015-02-13 20:59:13 -08:00
e26ba505f6
BulletSim: update DLLs, SOs, and dylib with latest versions.
...
The dylib update is a new version that doesn't leak memory.
2015-01-25 13:24:50 -08:00
d9bfc710c0
Replace the tabs that have crept into isolated places in config and config example files with spaces
2015-01-21 00:54:13 +00:00
72814245be
Also deleted the option of setting Cap_WebFetchInventoryDescendents from OpenSim.ini.example
2015-01-14 06:33:15 -08:00
e2dd15625f
Added GetDisplayNames capability. For now, we don't actually use display names, and this cap returns the regular name. But this moves the server side into the newer, preferred, protocol used by the viewer for fetching the names of agents in the scene given their UUIDs. (the old protocol is via UDP). This works fine in my limited tests, but could use further testing by others.
2015-01-09 08:31:56 -08:00
16ff808595
Fix name of EstateDataRemoteConnector in the comment.
2015-01-07 19:18:18 -08:00
14b3ee636d
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2015-01-07 11:09:04 -08:00
46ab59723d
Added a different/better way of specifying data services in DataSnapshot -- using DATA_SRV_ keys, one per service. This allows 3rd party modules to add data services automatically.
2015-01-07 11:04:23 -08:00
700543b161
BulletSim: tweek step parameters and logic to make walking up steps
...
closer to SL. This change should address small floor edges acting like
walls, approaching a step at any angle (other than walking backwards)
will allow walking up, and reducing the avatar pop-up when going up
stairs.
2015-01-07 06:39:29 -08:00
8e562f04d1
Donation of robust network connectors for estate service, as promised. This allows to have one central database for estates without having to open the MySql port. This is off by default, so not to disturb everyone's existing installations. To use it, see GridCommon.ini.example [EstateDataStore] section and Robust*.ini.example's new additions.
...
Note that I also made things consistent by removing both the EstateDataService and the SimulationService into their own dlls, just like all other services. They really didn't belong in Services.Connectors, since everything in that component is about network connectors to robust backends. We may have too many dlls, and at some point it might not be a bad idea to merge all services into one single dll, since they all have more or less the same dependencies.
2015-01-06 21:24:44 -08:00
383a1a6fe1
Fix typo in OpenSim.ini.example
2015-01-04 18:52:37 -05:00
d3a74894ab
BulletSim: update BulletSim DLLs and SOs to remove chatty debug log messages.
2015-01-04 14:21:43 -08:00
5179f078f7
Removing the Wifi config example from Robust.HG.ini.example, because it is not needed anymore. Wifi is now a mono addin to Robust, and it can be deployed in two ways: by installing the Wifi plugin via mautil or by compiling Wifi from source, in which case it will appear in the registry when Robust starts because the Diva Wifi dlls are present in bin.
2015-01-04 11:06:28 -08:00
cfa89bbe31
Make bin/mautil.exe executable when checked out.
2015-01-03 15:28:15 -08:00
e643722d7c
Changed the dll name that comes in Robust.HG.ini.example for Wifi.
2015-01-02 16:54:13 -08:00
d520611f57
Amend to previous commits -- also needed for bug fixes: the mono addins dlls.
2015-01-02 16:06:11 -08:00
faea742f32
Slight change in the way region module addins handle their configuration. Rather than opensim grabbing their config file automatically from the addins folder, it's the module's responsibility to read its own config file. This makes it consistent with Robust-bound addins.
2015-01-02 13:32:20 -08:00
08509a87cd
Another minor improvement to mautil related to https://github.com/mono/mono-addins/issues/22 . And since these commits show up in that issue report, I thought I'd say 'hi' to the zealous Xamarin developer who seems to be eager to get pull requests. Not yet, my friend, not until I fix all the bugs that stand in my way, now that I'm using mautil :-)
2015-01-02 13:30:04 -08:00
36eb45fc8e
Switched mautil.exe with another that has a bug fix for this bug report: https://github.com/mono/mono-addins/issues/22
2015-01-02 09:17:39 -08:00
462f521eba
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-12-30 23:47:29 -08:00
186d4a6d5b
compile Prebuild.exe with mono 3.2.8 targeting .NET framework 3.5
2014-12-30 23:14:01 -08:00
0af02efaed
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-12-30 20:05:33 -08:00
Diva Canto