1b5c41c14a
Implement co-operative script termination if termination comes during a script wait event (llSleep(), etc.)
...
This makes use of EventWaitHandles since various web references indicate that Thread.Interrupt() can also cause runtime instability.
If co-op termination is enabled, then termination sets the wait handle instead of waiting for a timeout before possibly aborting the thread.
This allows the script to cleanly terminate if it's in a llSleep/LL function delay or the next time it enters such a wait without any timeout period.
Co-op termination is not yet testable since checking for termination request within loops that never trigger a wait is not yet implemented.
2013-01-16 00:12:40 +00:00
fccb03227e
Instead of passing separate engine, part and item components to script APIs, pass down IScriptInstance instead.
...
This is to allow the future co-operative script thread terminate feature to detect and act upon termination requests.
This splits the assembly and state loading out from the ScriptInstance() constructor to a separate Load() method
in order to facilititate continued script logic regression testing.
2013-01-15 21:13:22 +00:00
1c240cd555
Print full stacktrace from plugin loading failure to help determine what went wrong, rather than a possibly unhelpful simple exception message.
2013-01-15 01:07:20 +00:00
c846cefda9
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-01-15 00:24:51 +00:00
4e1ca890c2
BulletSim: fix not moving physical objects below terrain to over terrain.
...
Add locking on register prestep action list preventing potential race conditions.
Little comment and formatting changes.
2013-01-14 15:46:46 -08:00
7978b349bd
refactor: Simplify ScriptInstance by retaining reference to SceneObjectPart instead of sometimes but not always looking it up.
2013-01-14 23:19:47 +00:00
8bf0a9f85d
BulletSim: disable center-of-mass computation for linksets until debugged. Move physical prim above ground if it is underground. Previously tried to correct by applying and up force but the prim would never go through the ground.
2013-01-14 07:50:58 -08:00
459fcd81c9
BulletSim: move center of gravity of linkset to its geometric center.
...
Necessitated allowing simulator and physical position of a body to
get out of sync since Bullet assumes that <0,0,0> is the center of mass.
Update DLLs and SOs for the UpdateChildTransform so positions of
individual prim in a linkset can be implemented.
2013-01-11 16:47:53 -08:00
eacc2561d1
BulletSim: add osGetPhysicsEngineType() LSL function and update
...
the physics engines to return the name that is specified in the INI
file ("physics = XXX") as the type of engine.
This os function is a little different than the others in that it
does not throw an exception of one is not privilaged to use it.
It merely returns an empty string.
2013-01-11 16:47:35 -08:00
93adc4cb66
BulletSim: Add IsSelected attribute to physical objects. Have vehicles check to see if physical before trying to step. Replace vehicle gravity application. Previously relying on Bullet to apply gravity but since vehicles over-ride the velocity calculation, gravity never had a chance to accelerate the body down. Added AddForceImpulse as well as AddForce for those who need to apply immediate velocity updates. Use the impulse to apply the linear motion.
2013-01-11 16:47:20 -08:00
daacd4deed
Fix exception reporting in SceneObjectPart so it logs what the exception is rather than just saying it happened.
2013-01-11 16:47:07 -08:00
7e58bbaac6
BulletSim: Redo linear function coding so they can better interact. New algorithm for limitMotorUp that relies on going up when not colliding rather than distance from ground. Add parameter for turning on and off embedded source vehicle debugging.
2013-01-11 16:46:53 -08:00
98168edc29
BulletSim: remove double application of buoyancy. Centralize computation of buoyancy. Add motor angular debugging controls.
2013-01-11 16:46:38 -08:00
b592ec265b
BulletSim: fix the 'No recognised physics mesh found ...' error spew by remembering that the last asset fetch failed until the simulator resets the shape parameters.
2013-01-11 16:44:34 -08:00
72cc94cfbc
add some sanity checking to HandleAgentRequestSit handler
2013-01-10 20:21:18 -08:00
660d36a5b0
Implement a workaround solution for saving manual script state changes by the user before logout instead of wrongly removing the script early.
...
This workaround relies on the fact that a closing client goes inactive before the attachments derez calls happen.
This reverts the change to remove scripts too early instead of stopping them, since the the two step stop then remove is necessary to execute the detach event.
2013-01-11 02:28:43 +00:00
05ac6d3209
Save attachments on detach/exit if a contained script state has been changed.
...
This involves making Attachments module listen for start/stop script changes.
It also involves removing the script from the region on detach in the same manner as every other DeleteSceneObject() call rather than simply stopping it
This is necessary tue to the bad assymetry of start and stop script triggers but it appears to be the correct behaviour anyway, as detached objects are completely gone from the sim.
Not just in a state where their scripts have been stopped.
2013-01-11 01:46:36 +00:00
26347307ec
Fix a regression in the last few scene commands changes where setting these via the viewer estate dialog stopped working.
...
Forgot to register the new interface.
Also removes some code which got included by adpating an existing module.
2013-01-11 00:08:52 +00:00
f3a2bbbd93
Add "debug scene get" console command to list current scene options
2013-01-10 23:56:11 +00:00
a16ae5d7e3
Move scene debug commands into separate module. Command changes from "debug scene <key> <value>" to "debug scene set <key> <value>" to accomodate future settings
2013-01-10 23:49:48 +00:00
983e458bb6
refactor: route the final scene backup through the same code that handles periodic backup
...
This is rather than making unnecessary duplicate checks that the SOG later performs again.
2013-01-10 22:59:40 +00:00
17f21ba9a0
minor: Capitalize GroupsModule command category
2013-01-10 22:46:25 +00:00
e65737be93
minor: add missing newline to "debug scene" console command
2013-01-10 22:42:33 +00:00
f566dc0618
Remove unimplemented "debug teleport" console command
2013-01-10 22:42:12 +00:00
701ca1e4b8
Add "debug scene pbackup true|false" console command. This enables or disable periodic scene backup. For debug purposes.
...
If false, scene is still saved on shutdown.
2013-01-10 22:38:48 +00:00
170d376967
On baked texture save, replace any HG ID with an ordinary asset ID so the HGAssetBroker doesn't try to save back to the avatar's originating region
2013-01-10 01:45:56 +00:00
84407e322f
revert accidental change to MemoryWatchdog stat calculation in previous b1b4687
2013-01-10 01:30:00 +00:00
b1b4687250
Add "show script timers" command to show script timers. For debug purposes.
...
Also, "show sensors" changes to "show script sensors".
2013-01-10 00:57:49 +00:00
a0000a034f
Add "show sensors" command to show script sensor information for debug purposes.
2013-01-10 00:32:22 +00:00
290dc274ec
minor: Remove unnecessary commented out code from last commit c28a2f05 and fix up code comment
2013-01-09 01:04:43 +00:00
c28a2f05ca
minor: make spacing consistent in console help output
2013-01-09 00:54:28 +00:00
e4fad4a09d
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2013-01-09 00:21:43 +00:00
df1d7414ad
BulletSim: Fix hover height (boats float at the correct level).
...
Fix problem of vehicles going crazy when backing up.
2013-01-08 16:37:49 -08:00
f16c4a254c
Revert "Prevent empty Anim Packs"
...
This reverts commit 5561333668
2013-01-09 00:20:24 +00:00
c1c540f454
Revert "Fix sequence id fr default anim"
...
This reverts commit a775931a0c
2013-01-09 00:20:14 +00:00
3d5e3e35b7
minor: Fix command match of "debug script" command to "debug scripts" to match other scripts commands (and it's own short help text)
2013-01-09 00:08:08 +00:00
5fa4b8b144
minor: Allow "script *" console commands to take multiple script item ids
2013-01-09 00:01:48 +00:00
a775931a0c
Fix sequence id fr default anim
2013-01-08 23:36:05 +00:00
5561333668
Prevent empty Anim Packs
2013-01-08 23:12:32 +00:00
2ac96dd181
Add the new UpdateAgentInformation cap to make maturity on more recent viewers
...
work.
2013-01-08 22:52:14 +00:00
1603606f1d
BulletSim: improve vehicle angular banking and deflection computation. Rotate angular correction forces to be world relative rather than vehicle relative.
2013-01-07 22:00:50 -08:00
8452c0a870
BulletSim: add function to push avatar up when hitting stairs.
...
It looks like BulletSim and ODE rely on penetration correction to cause
the avatar to move up and thus allowing walking up stairs. Object
penetration was minimized for walking and flying (so one doesn't go
through walls) and this stopped stairs from working. This commit
introduces avatar movement code to check for collisions at the
feet while walking and attempts to raise the avatar for the steps.
Not yet perfect but movement is better.
2013-01-07 16:05:02 -08:00
599dbc3d95
BulletSim: fix exception when re-creating the terrain when loading an OAR file
2013-01-07 16:04:21 -08:00
2e5222055f
BulletSim: comments and removing small compile errors introduced in last commit.
2013-01-06 22:56:16 -08:00
9393403253
BulletSim: update DLLs and SOs with better debugging output.
...
Add definition of hand crafted avatar mesh. Not used yet.
Comments and cleanup.
2013-01-06 14:01:15 -08:00
2eba80a8cd
BulletSim: fix problem where mesh shapes were physically just their bounding box and not the complete mesh. Fill mesh physical objects are back.
2013-01-04 17:06:52 -08:00
48cfc6d089
BulletSim: implement llMoveToTarget by adding PIDActive, etc.
...
Implementation of non-vehicle hover but haven't tested it a lot.
Update TODO list.
2013-01-04 17:06:51 -08:00
d0c7f7f050
BulletSim: add some features to the PID motor to make it more flexible.
2013-01-04 17:06:51 -08:00
613f516007
BulletSim: convert avatar movement from a force to an impulse. Shouldn't
...
change functionality but removes an oddity in computing the force.
2013-01-04 17:06:50 -08:00
2c6b269b6e
BulletSim: add initial implementation of llMoveToTarget and hover height.
...
Not all there yet.
2013-01-04 17:06:50 -08:00
Justin Clark-Casey (justincc)