70f6a2852e
* Fixes [irritating] edge case in Util.GetLocalHost which could return an IPv6 address if no non-loopback IPv4 address can be found.
...
* Restores internal IPv6 support to NetworkUtil.*
* Fixes bad login unit tests.
2009-05-23 07:51:29 +00:00
6fe55a7ff8
* Disables internal IPv6 Support - causing issues.
2009-05-23 07:29:14 +00:00
bb363d9aa4
* "Fixed" an issue with NAT Login Handler, apparently an IPv4Mask can be null on an IPv4 address. Go figure. (!?!)
2009-05-23 07:07:02 +00:00
6b312d9340
* Implements automatic loopback handling for standalone regions.
...
* This /should/ make OpenSim behave properly when hosting behind a NAT router and utilizing port forwarding (but the router doesn't support Loopback)
2009-05-23 06:29:08 +00:00
e9ea959263
* Pipes IPEndPoint through all Login methods, including LLSD/OSD login paths.
2009-05-23 06:14:02 +00:00
31baeef469
* Pipes requestors IP address through all XmlRpcRequest delegates. This is needed to be able to 'NAT-wrap' the login sequence.
...
* If you have something using XmlRpc that isn't in core, change your method signature from:
(XmlRpcRequest request)
to:
(XmlRpcRequest request, IPEndPoint remoteClient)
2009-05-23 06:05:20 +00:00
3b1b3ac9bb
* Breaks OpenSim.. err I mean.. adds NAT translation support to EnableSimulator EventQueue methods.
...
* NB: This may actually break logins on certain regions. Shake well before consuming.
2009-05-23 05:44:18 +00:00
f8c569dc7c
* NetworkUtil now handles an error case in a way which is easier to debug.
2009-05-23 05:18:37 +00:00
2d06135166
* Adds new NetworkUtil class, contains methods for handling IP resolution when located on the same subnet. (Eg, can be used to avoid NAT Loopback requirements if fully utilized.)
...
* Adds a few new network-related methods to Util.
2009-05-23 05:09:10 +00:00
1be22bc626
Changing extension of two of the config files to .example because they need to be copied and customized.
2009-05-23 01:40:03 +00:00
92d5b1560d
Added a few pre-packaged configurations to make it easier for people to configure their sims.
2009-05-22 22:48:25 +00:00
a3145e4e5a
* Reintroduce save iar test, which wasn't working because the asset service hadn't been manually post intiailized
2009-05-22 19:59:45 +00:00
6d6d8445b9
Bug fix in HGAssetService. POSTs back home (standalone) should now work.
2009-05-22 18:02:49 +00:00
3b689e506f
From: Alan Webb <alan_webb@us.ibm.com>
...
Changes to support client-side image pre-caching in the region. This
commit adds an additional calling sequence to the DynamicTexture data
and URL calls. The new interface allows a dynamic image to be loaded
into a specific object face (rather than the mandatory ALL_SIDES
supported today.
This is in part fulfilment of ticket #458 .
2009-05-22 16:22:49 +00:00
6626937e9a
From: Alan Webb <alan_webb@us.ibm.com>
...
- Fix typographical error in RPC response.
- Remove obsolete commentary.
2009-05-22 15:21:49 +00:00
55442f3644
From: Alan Webb <alan_webb@us.ibm.com>
...
RequestUserInventory is supposed to drive a supplied callback
when it completes. In fact, it fails to do so if the user's
inventory does not exist (e.g. the inventory database is
unavailable for some reason), and the requestor is left
sleeping forever.
The code has been modified to return empty lists via the
callback as an accurate reflection of what is there: nothing.
2009-05-22 15:18:41 +00:00
1d02636c27
cleaning out warnings.
...
NOTE: we currently have a gazillion warnings caused stuff flagged as
"obsolete" (OGS1 stuff) --- what's up with that?
2009-05-22 14:57:00 +00:00
912be7a2ac
converting Chat module and Concierge module to new style region modules
2009-05-22 14:25:50 +00:00
1df80943b0
dropping sex from SceneBanner...
2009-05-22 14:21:44 +00:00
37726764be
changing IRCBridgeModule to new region module scheme
2009-05-22 11:37:26 +00:00
ac2fe53e89
adding RemoveXmlRpcHandler to IHttpServer
2009-05-22 11:37:14 +00:00
da170cde46
Cleaning up a few HG things. HG Posts may now work in grids, but if the home grid is a standalone, this still doesn't work -- something wrong with RegionAssetService's DB connection.
2009-05-22 04:23:59 +00:00
9de2436c1e
Removing the [UserService] section, because it's not working yet.
2009-05-22 00:23:43 +00:00
8f8e20b39d
Small update to make the command line work again
2009-05-21 23:07:26 +00:00
e5f3337c3f
Implement .ini file includes. Anything that begins with "Include-" will be
...
treated as another ini source to load.
For example:
Include-Asset = AssetSetup.ini
will load AssetSetup.ini after all other ini files are done.
This works recursively, too
2009-05-21 23:06:10 +00:00
a85f496f4d
* Upgraded LLStandaloneLoginModule, LLProxyLoginModule and LLClientStackModule to new
...
region modules. This was needed because the stand alone and grid modules weren't deleting
old scenes, which caused an issue when deleting and recreating a region with same name
on same x,y coordinates. Tested it on standalone and issue is fixed. Requires prebuild
to be run again.
Fixes Mantis #3699
2009-05-21 20:28:59 +00:00
3d0f110f21
normalize quats before applying llSetRot()
2009-05-21 19:44:20 +00:00
8e6289b8ca
Hooked up the RestRegionPlugin Get Region/xxx/terrain so it outputs xml containing the terrain heightmap rather than the old "terrain not implemented" message.
...
The format of the terrain data is: the floats encoded in Base64 and serialised into xml. So I think far from ideal, but as the support for outputting that format was already there...
Still need to hook up a method for remotely loading this data.
2009-05-21 10:54:49 +00:00
e4d68964dd
Added ITeleportModule interface, and added a hook into scene so if a module has registered this interface then that handles teleport requests rather the SceneCommunicationService.
...
As by default there is no ITeleportModule registered, Teleports by default will still be handled by SceneCommunicationService.
2009-05-21 10:41:16 +00:00
787d58ae7f
Put some meat on the bones of the REST console. NO user functionality yet
2009-05-20 20:28:57 +00:00
94d4f28e2d
Comment out the asset cache config in .ini.example.
2009-05-20 18:55:45 +00:00
3ae9bb6d83
Move the color console logic from the appender into the local console, since
...
that is the only one that can use it. Change appender output to always go
through the console output functions.
2009-05-20 14:40:50 +00:00
4065ebff15
Remove the pre-log4net, discrete output methods from the consoles
2009-05-20 13:50:33 +00:00
4c7da1421f
refactoring instantiation of Location object: moving it out of the for
...
loop as it really is a "constant"
2009-05-20 13:37:25 +00:00
20383a61b8
Thank you, StrawberryFride, for a patch to fix SceneBan behavior.
...
Applied with changes (commented the logging entirely, since Linux defaults
to debug level)
Fixes Mantis #3689
2009-05-20 11:27:15 +00:00
a3fed17956
Fix a slight oversight in SceneInventory that would not enable copy to
...
inventory when permissions are bypassed
2009-05-20 10:54:35 +00:00
6ef1df4d42
Ignore generated files.
2009-05-20 01:41:47 +00:00
e0bc5c5db2
Add copyright headers, formatting cleanup.
2009-05-20 01:32:06 +00:00
ecfad4944b
Update svn properties.
2009-05-20 01:02:37 +00:00
cd90ea377e
* minor: Tweak the command exception catcher of last resort to make a little more sense
2009-05-19 19:57:45 +00:00
01ca3a91ad
* Take another attempt at http://opensimulator.org/mantis/view.php?id=3191
...
* Return something more sensible if a file isn't found
2009-05-19 19:41:01 +00:00
14f0d5e77f
trying to fix exception with in LLPacketQueue probably caused by
...
missing locks where the queue was modified.
2009-05-19 18:46:20 +00:00
8559f9bbba
From: Alan Webb <alan_webb@us.ibm.com>
...
The image render module is returning everything twice. Once with
data, once with null. This change adds a return to stop this
behavior. This was not apparent until I added a message to the
catching routine which issued a warning message when no data was
returned.
2009-05-19 18:34:04 +00:00
88f17010b7
Add initializing m_scene if it's not null. Marking MyScene as [Obsolete]
...
because it will be removed soonish. This is NOT the way to go.
Thanks, mpallari, for pointing this out.
Fixes Mantis #3684
2009-05-19 16:26:20 +00:00
87b95e324e
Sculpt mesher refactor
...
adds some previously missing geometry to sculpties
new LOD improves vertex accuracy
fix torus mode mesh edge joining
sync with primmesher r37
2009-05-19 10:09:33 +00:00
744100821d
Refactor RegionAssetService to load the service connector rather than
...
duplicating it's functionality
2009-05-19 00:36:06 +00:00
23d902be42
Remove the old asset cache and local services and the configurations for them
2009-05-18 23:18:04 +00:00
df16532858
Bug fix and config rename.
2009-05-18 23:15:50 +00:00
75b8b60aa1
Removing the last reference to CommsManager.AssetCache.
2009-05-18 22:22:09 +00:00
ed28c89d96
* Adds code that allows you to save an outfit then tell bot to wear it.
...
* Still doesn't work due to a bug on LibOMV that should be out on 0.6.3.
* Released by request. Important Warning: Linden Viewer 1.2.3 changes the way appearance works and break bot's appearances. LibOMV is working on it
2009-05-18 22:00:43 +00:00
Adam Frisby