8a949f0ee1
Add regression tests for token buckets on their own
2014-11-25 23:22:20 +00:00
ec3b43d28d
Make regression throttle tests consistently test target and max throttle settings.
...
As part of this also refactors code to put all throttle asserts in a single regression test method
2014-11-25 23:22:20 +00:00
548abb3b47
minor: In "show client stats" command, properly handle the case where a client has made no AgentUpdate requests (as is the case with agents that have only even been child) rather than throwing an exception
2014-11-25 23:22:20 +00:00
a9dde81753
minor: Correct letter accidentally added to copyright notice on top of Scene.cs (almost five years ago!)
2014-11-25 23:22:20 +00:00
b7ef6009a7
In Scene.AddNewAgent(), avoid a situation where an exception can result in a client being added to the manager without IClientAPI.SceneAgent being set.
...
This is done by adjusting the order of code so that SceneAgent will always be set before adding the client.
Various parts of the code (rightly) assume that a a client registered to the manager will always have a SceneAgent set no matter what.
2014-11-25 23:22:20 +00:00
e6af551007
For now, send all non-full terse updates for ones own avatar directly to the LLUDP client stack rather than queueing internally within LLClientView.
...
When an HG avatar enters a scene, it delays processing of entity updates. Could be crowding out by other updates or something else.
This delay in ones own av mvmt updates results in mvmt lag experienced on the client. Avoiding the internal LLClientView for these packets appears to resolve this issue.
Appears most noticeably for avatars with attachments, though has also been seen on those without sometimes. Hasn't been observed for non-HG avatars in general.
Will be investigating exactly what the problem is, at which point there will be a more permanent solution.
2014-11-25 23:22:20 +00:00
10095c1a58
Add "debug lludp throttles get/set request" and get current
...
This allows one to set the requested throttle (which normally comes from the client) as opposed to the max.
2014-11-25 23:22:19 +00:00
61d6bd78b3
Change the word order of some debug lludp settings for readability
...
On server, scene-throttle-max becomes max-scene-throttle and likewise max-new-client-throttle
On clients, throttle-max becomes max
2014-11-25 23:22:19 +00:00
44dc58cc7f
Add "debug lludp get/set new-client-throttle-max" to allow default new client throttle to be set separately from existing clients.
...
"debug lludp throttles get/set throttle-max" now only gets and sets current max client throttles
2014-11-25 23:22:19 +00:00
68d0c4d37b
Add "debug lludp get" command which currently just shows scene-throttle-max to mirror "debug lludp set"
...
Information is also available in "show server throttles" but that's more for non-debug info rather than attempting to get and set parameters on the fly for debug purposes.
2014-11-25 23:22:19 +00:00
336790e7b4
Add some more llGiveInventory() regression tests
2014-11-25 23:22:19 +00:00
1eb3e6cc43
When inserting missing CreatorData in the HGAssetMapper, do the rewrite on a streaming xml basis rather than loading it all into memory via XmlDocument.
...
This is because objects with lots of parts can have a lot of xml to load into memory, and this has been seen to have a noticeable performance impact.
Whereas streaming has been seen to reduce the impact in normal serialization.
Implmentation is messy but I couldn't see a better way of doing it when you can't assume that you know the exact structure of the input XML.
2014-11-25 23:21:38 +00:00
f7ab3e20bc
Add regression test TestPostAssetRewrite() to check results of HGAssetMapper.Post() object asset rewriting,
2014-11-25 23:21:38 +00:00
6c043dd6ff
If an exception makes it to the top of a JobEngine request, catch and log instead of letting it terminate the simulator...
2014-11-25 23:21:38 +00:00
16a5e15443
Allow GetMesh capability to be served directly by a server like GetTexture
...
To do this required GetMesh to be converted to a BaseStreamHandler
Unlike GetTexture connector, no redirect URL functionality yet (this wasn't present in the first place).
2014-11-25 23:21:38 +00:00
281969093f
Start JobEngine by default in simulator for now.
2014-11-25 23:21:38 +00:00
1c9529aa9e
If JobEngine is active, then use it to copy/rez attachments for an avatar entering the scene that isn't initially logging on. This will execute tasks consecutively rather than concurrently.
...
This has two aims
1) Reduce initial teleport failures when a foreign Hypergrid user enters a region by not holding up the teleport for attachment rez (this can be particularly costly when HG gets all assets in the object graph.
2) Reduce server load that may impact other simulator activities.
This complements existing JobEngine options that perform initial login attachment rez and appearance send in consecutive tasks.
2014-11-25 23:21:38 +00:00
90f9cea07b
minor: be consistent about reporting errors out of HttpServerBase
2014-11-25 23:21:38 +00:00
f4424bdfcf
If the port entry in [Network] for a server is missing, then actually tell the user that's the problem rather than simply exiting silently.
...
Also exit with Environment.Exit(), not by aborting the thread.
2014-11-25 23:21:38 +00:00
8ddcd16c69
Add an IConfigSource constructor to HGAssetBroker so that it can be instantiated directly for potentially handling some capabilities directly in services with HG active
2014-11-25 23:21:38 +00:00
d33964222a
Fix an issue where specifying both max client and server outgoing UDP throttles would cause client throttles to be lower than expected when total requests exceeded the scene limit.
...
This was because specifying a max client throttle would always request the max from the parent server throttle, no matter the actual total requests on the client throttle.
This would lead to a lower server multiplier than expected.
This change also adds a 'target' column to the "show throttles" output that shows the target rate (as set by client) if adaptive throttles is active.
This commit also re-adds the functionality lost in recent 5c1a1458
2014-11-25 23:21:38 +00:00
ead32de790
Use automatic properties for Parent and TotalDripRequest in TokenBucket to make code analysis easier. No functional change.
2014-11-25 23:21:37 +00:00
40314b56f2
Remove the unnecessary intermediate total token bucket.
...
This only had one child, which is the 'adaptive' token bucket.
So from testing and currently analysis, we can use that bucket directly which simplifies the code.
2014-11-25 23:21:37 +00:00
93f3444de1
minor: remove warnings from unused fields in LocalGridServicesConnector
2014-11-25 23:21:37 +00:00
dacd0ecfee
minor: Remove unused field from EntityTransferModule
2014-11-25 23:21:37 +00:00
a98b514184
minor: remove compiler warning from unused field in SimulatorFeaturesModule
2014-11-25 23:21:37 +00:00
0d77796584
minor: resolve warnings from unused fields in XBakesGet and Post handlers
2014-11-25 23:21:37 +00:00
d5ead532cb
Remove compiler warning from UserProfilesHandlers
2014-11-25 23:21:37 +00:00
07a7f941e5
minor: remove warning in BasicHttpAuthentication by commenting out unused remove_me parameter (which looks like it might still be potentially useful for logging)
2014-11-25 23:21:37 +00:00
df031fe8be
extend TestClientThrottleRegionLimited for 2 clients after testing 1. Renames to TestSingleClientThrottleRegionLimited()
2014-11-25 23:21:37 +00:00
dce98acb69
Add regression test TestClientThrottleRegionLimited() for testing simple behaviour of throttles where a region-wide total outbound limit is in place.
2014-11-25 23:21:37 +00:00
075f718f3f
factor out common throttle setting byte[] array construction in ThrottleTests.
2014-11-25 23:21:37 +00:00
9cdd38d0cf
Add regression test TestClientThrottleLimited() for throttle behaviour when a max client total limit is enforced server-side
2014-11-25 23:21:37 +00:00
fc878a33ed
refactor: consistently put all test classes in the OpenSim.Tests.Common package rather than some in OpenSim.Tests.Common.Mock
...
the separate mock package was not useful and was just another using line to always add
2014-11-25 23:21:37 +00:00
af0a851eba
minor: disable logging in regression test TestClientThrottleSetNoLimit
2014-11-25 23:18:40 +00:00
9934e2c545
minor: comment out unused method in regression BasicCircuitTests
2014-11-25 23:18:40 +00:00
746defa094
Add basic regression test ThrottleTests.TestClientThrottleSetNoLimit
2014-11-25 23:18:40 +00:00
52370ac94d
refactor: Move test clientstack setup code out of BasicCircuitTests into OpenSim.Tests.Common.ClientStackHelpers
2014-11-25 23:18:40 +00:00
87d5da86a1
Fix recent regression in "debug lludp throttles get" command that stopped it printing any information. Also fix max throttle displayed to be properly kbps
2014-11-25 23:18:40 +00:00
a13022c296
minor: in "show server throttles", display unset if new client throttle value is not set rather than 0
2014-11-25 23:18:40 +00:00
44e0a2f906
Add throttle-max option to "debug lludp throttles set" to allow runtime setting of default and existing client throttles.
...
Doesn't yet adjust until clients submit new throttle settings.
2014-11-25 23:18:40 +00:00
5c13980eb7
Change "debug lludp throttle *" commands to "debug lludp throttles" for consistency (and because I keep typing throttles).
...
This will still work with "debug lludp throttle" anyway.
2014-11-25 23:18:40 +00:00
a4209d2df4
small adjustment to commented out scene_throttle_max_bps and client_throttle_max_bps examples in OpenSimDefaults.ini
...
Make them actually reflect 20 mbit and 1.5 mbit respectively
2014-11-25 23:18:40 +00:00
c5cd93db81
Change help text for client_throttle_max_bps in OpenSimDefaults.ini to state it is in bytes, not bits
...
This is the same as already done for scene_throttle_max_bps
Internally, the token buckets are in bytes and the other help text makes it clear that the number is bytes per second
(though with the wrong assumption that 1 mbit = 1024 * 1024 bits whereas 1 mbit = 1000 kbits = 1000000 bits)
2014-11-25 23:18:40 +00:00
d20aeefef2
Fix console set and get of max scene rate. Was performing wrong calculation - throttle buckets are set in bytes, not bits
2014-11-25 23:18:40 +00:00
10d09e287c
Eliminate 'max' throttle setting from server throttles report since this never applies.
2014-11-25 23:18:40 +00:00
679eaec22f
Allow "debug lludp throttle *" commands to work without a user name, in which case they apply to all users in the lludp server
2014-11-25 23:18:39 +00:00
a142edec03
minor: add apparant total to logging when client sets throttles
2014-11-25 23:18:39 +00:00
c73e62ea3a
minor: fix bug in throttle logging where arguments were mismatched
2014-11-25 23:18:39 +00:00
1d33a40f59
Add "debug lludp set scene-throttle-max <value>" console command to allow us to potentially set the scene max throttle on the fly.
2014-11-25 23:18:39 +00:00
Justin Clark-Casey (justincc)