This is to allow small adjustments of less than 0.05m in functions such as llSetPrimitiveLinkParams() to work
This is another fix for http://opensimulator.org/mantis/view.php?id=7044
Extends regression test for this case.
Fix odd "cannot cross into banned parcel" viewer error message when crossing
into non-existant region. Proper permission failure messages are now returned.
Locking attachments then launching script instances on a separate thread will not work, attachments will simply be unlocked and vulnerable to race conditions.
This can happen under poor network conditions if a viewer repeats the message send
If this happens, physics actors can get orphaned, which unecessarily raises physics frame times
Conflicts:
OpenSim/Region/CoreModules/Framework/EntityTransfer/EntityTransferModule.cs
OpenSim/Region/Framework/Scenes/SceneBase.cs
OpenSim/Services/Interfaces/IGridService.cs
OpenSim/Services/LLLoginService/LLLoginResponse.cs
(conflicts were debug statements that are commented out in master branch)
Add 'not found' caching in EntityTransferModule.GetRegionContainingWorldLocation
so hitting borders and bad teleports do not continuiously hammer on the GridService.
Add new region crossing code to varregion
Conflicts:
OpenSim/Region/CoreModules/Framework/EntityTransfer/EntityTransferModule.cs
OpenSim/Region/Framework/Scenes/ScenePresence.cs
Rename 'RegionWorldLocX' to 'WorldLocX' and same for Y and Z.
This keeps the downward compatibility and follows the scheme of 'region'
and 'world' location naming that is happening in the Util module.
- Parts of region crossing code
- New bakes handling code
- Bakes now sent from sim to sim without central storage
- Appearance handling changes
- Some changes to sitting
- A number of unrelated fixes and improvements
It turns out that the x/y rot data in mouselook is needed to implement this and to push the avatar against the ground if walking in mouselook.
Doing this in the terse send so that we preserve mouselook rotation information
Fixes http://opensimulator.org/mantis/view.php?id=3274
When not in mouselook, avatar only sends rotations around the Z plane (since that's the only way an avatar can rotate).
However, in mouselook it also sends X and Y information. But sending X and Y in terse updates causes issues with wrong camera movement in mouselook.
So strip out X and Y components for now. If this is an issue, then could strip out before sending avatar terse update, though this generates more cpu work.
Thanks to mirceakitsune for suggesting an initial fix
AGENT_CONTROL_STOP is specified to SP.HandleAgentUpdate if the user holds down the space bar on a viewer.
For a stopped avatar, this prevents fly or walk/run (though not rotate) until released.
For a walking/running avatar, this reduces movement to half speed.
For a flying avatar, this stops the avatar.
These are observed behaviours on the LL grid - there was no previous OpenSimulator implementation
This commit introduces an optional parameter to SP.AddNewMovement(), which means that it will no longer compile on .NET 3.5 or earlier versions of Mono than 2.8
Currently, this does not work for jumping, and if used whilst flying the avatar continues the fly animation even though it does not move
Routines in Util to compute region world coordinates from region coordinates
as well as the conversion to and from region handles. These routines have
replaced a lot of math scattered throughout the simulator.
Should be no functional changes.
count number to integer world coordinates.
Added new methods RegionWorldLoc[XY].
Refactored name of 'RegionLoc*' to 'LegacyRegionLoc*' throughout OpenSim.
Kept old 'RegionLoc*' entrypoint to RegionInfo for downward compatability
of external region management packages.
There is a possibilty that some V2 teleport failures are due to the viewer triggered CompleteMovement thread not seeing the change of m_originRegionID by the UpdateAgent thread.
Need an info message since this is currently important in detecting teleport issue when not at debug log level.
CompleteMovement message occurs before MakeRootAgent() one did
If this is attempted, they get a "Try moving closer. Can't sit on object because it is not in the same region as you." message instead, which is the same as current ll grid.
Sitting on ground is okay, since viewer navigates avatar to required region first before sitting.
This is giving much better results on teleports between simulators over my lan where for some reason there is a pause before the receiving simulator processes UpdateAgent()
At this point, v2 teleports between neighbour and non-neighbour regions on a single simulator and between v2 simulators and between a v1 and v2 simulator
are working okay for me in different scenarios (e.g. simple teleport, teleport back to original quickly and re-teleport, teleport back to neighbour and re-teleport. etc.)
The root cause was that v2 was only closing neighbour agents if the root connection also needed a close.
However, fixing this requires the neighbour regions also detect when they should not close due to re-teleports re-establishing the child connection.
This involves restructuring the code to introduce a scene presence state machine that can serialize the different add and remove client calls that are now possible with the late close of the
This commit appears to fix these issues and improve teleport, but still has holes on at least quick reteleporting (and possibly occasionally on ordinary teleports).
Also, has not been completely tested yet in scenarios where regions are running on different simulators
These were genuine failures caused by ScenePresence.CompleteMovement() waiting for an UpdateAgent from NPC introduction that would never come.
Instead, we do not wait if the agent is an NPC.
This prevents an issue if the user teleports back to the neighbour simulator of a source before 15 seconds have elapsed.
This more closely emulates observed linden behaviour, though the timeout there is 50 secs and applies to all the pre-teleport agents.
Currently sticks a DoNotClose flag on ScenePresence though this may be temporary as possibly it could be incorporated into the ETM state machine
In this new protocol, and as committed before, the viewer is not sent EnableSimulator/EstablishChildCommunication for the destination. Instead, it is sent TeleportFinish directly. TeleportFinish, in turn, makes the viewer send a UserCircuitCode packet followed by CompleteMovementIntoRegion packet. These 2 packets tend to occur one after the other almost immediately to the point that when CMIR arrives the client is not even connected yet and that packet is ignored (there might have been some race conditions here before); then the viewer sends CMIR again within 5-8 secs. But the delay between them may be higher in busier regions, which may lead to race conditions.
This commit improves the process so there are are no race conditions at the destination. CompleteMovement (triggered by the viewer) waits until Update has been sent from the origin. Update, in turn, waits until there is a *root* scene presence -- so making sure CompleteMovement has run MakeRoot. In other words, there are two threadlets at the destination, one from the viewer and one from the origin region, waiting for each other to do the right thing. That makes it safe to close the agent at the origin upon return of the Update call without having to wait for callback, because we are absolutely sure that the viewer knows it is in th new region.
Note also that in the V1 protocol, the destination was getting UseCircuitCode from the viewer twice -- once on EstablishAgentCommunication and then again on TeleportFinish. The second UCC was being ignored, but it shows how we were not following the expected steps...
- The existing event to scene has been split into 2: OnAgentUpdate and OnAgentCameraUpdate, to better reflect the two types of updates that the viewer sends. We can run one without the other, which is what happens when the avie is still but the user is camming around
- Added thresholds (as opposed to equality) to determine whether the update is significant or not. I thin these thresholds are ok, but we can play with them later
- Ignore updates of HeadRotation, which were problematic and aren't being used up stream
Revert "Trying to reduce CPU usage on logins and TPs: trying radical elimination of all FireAndForgets throughout CompleteMovement. There were 4."
This reverts commit 6825377380.
BestAvatarResponsiveness introduces the region rez delay in cases where the region is full of avatars with lots of attachments, which is the case in CC load tests. In that case, the inworld prims are sent only after all avatar attachments are sent. Not recommended for regions with heavy avatar traffic!
Justin, if you read this, there's a long story here. Some time ago you placed SendInitialDataToMe at the very beginning of client creation (in LLUDPServer). That is problematic, as we discovered relatively recently: on TPs, as soon as the client starts getting data from child agents, it starts requesting resources back *from the simulator where its root agent is*. We found this to be the problem behind meshes missing on HG TPs (because the viewer was requesting the meshes of the receiving sim from the departing grid). But this affects much more than meshes and HG TPs. It may also explain cloud avatars after a local TP: baked textures are only stored in the simulator, so if a child agent receives a UUID of a baked texture in the destination sim and requests that texture from the departing sim where the root agent is, it will fail to get that texture.
Bottom line: we need to delay sending the new simulator data to the viewer until we are absolutely sure that the viewer knows that its main agent is in a new sim. Hence, moving it to CompleteMovement.
Now I am trying to tune the initial rez delay that we all experience in the CC. I think that when I fixed the issue described above, I may have moved SendInitialDataToMe to much later than it should be, so now I'm moving to earlier in CompleteMovement.
This is because scripts (at least on XEngine) start unsuspended - deceptively the ResumeScripts() calls in various places in the code are actually completely redundant (and useless).
The solution chosen here is to use a copy of the SP attachments and not have the list locked whilst creating the scripts when an avatar enters the region.
This looks to address http://opensimulator.org/mantis/view.php?id=6557
This purports to fix the issue described in http://opensimulator.org/mantis/view.php?id=6653 where the camera can end up following the requested sit prim rather than the actual.
The original spot was by Vegaslon, this commit just goes about it in a slightly different way
This commit also makes m_requestedSitTargetUUID to be the actual UUID, which is consistent with m_requestedSitTargetID which was already doing this.
However, this adjustment has no practical effect since we only currently need to know that there's any requested sit UUID at all, not which one it is.
to avatar when it becomes root. This packet shows up in the viewer
logs as an error and appears to cause problems for completing the
texture rebake process for v1 viewers in some cases.
This is to reduce race conditions where neighbours may be responding erratically, thus mixing up create and close agent requests in time.
This mirrors OpenSimulator behaviour on enabling child agents where each region is contacted separately.
By checking against the grid's Avatar data, we can ignore viewer side attachments but still initiate these calls simulator-side.
Initiating simulator-side is always necessary for version 1 viewers.
This is a further commit to resolve http://opensimulator.org/mantis/view.php?id=6581
This was because the script resumption in AttachmentsModule was firing the attach event instead.
Had to reinstate the code in 285bd3a do we can resume the scripts there instead, though the bug existed before its removal.
This is to resolve http://opensimulator.org/mantis/view.php?id=6578
Justin Clark-Casey (justincc)