8e1bf55e7b
Add IncomingPacketsResentCount clientstack statistics
...
This records how many packets were indicated to be resends by clients
Not 100% reliable since clients can lie about resends, but usually would indicate if clients are not receiving UDP acks at all or in a manner they consider timely.
2013-11-06 01:02:20 +00:00
caf2abe311
Record individual region bot disconnects in pCampbot log
2013-11-05 23:32:26 +00:00
fb23f78928
minor: comment out "SetLastPosition" GridUserService debug message for now.
2013-11-05 23:18:09 +00:00
2d315ec207
Fix a race condition where pCampbot actions could continue even if a bot had disconnected.
2013-11-05 20:58:52 +00:00
c931b16c1f
Merge branch 'master' into varregion
2013-11-04 22:12:57 -08:00
f2810bf03a
varregion: add plumbing to pass region size from Scene down to the
...
physics engine.
Older physics engines will default to the legacy region size.
Update BulletSim to use the new region size information.
2013-11-04 22:10:54 -08:00
cd1a23fc14
varregion: remove uses of region size constant. In particular, update scene
...
to check for border crossings based on the size of the region.
2013-11-04 22:09:52 -08:00
ac94dc8a14
varregion: remove unused terrain serialization code in SQLite and PGSQL modules
2013-11-04 22:06:20 -08:00
9bf363e9be
varregion: send the proper terrain patch layer code for large terrain.
...
Code cleanups.
2013-11-03 08:14:51 -08:00
79b031bd0c
varregion: send region size in LLLoginResponse.
2013-11-02 15:42:26 -07:00
6df7d4219d
varregion: add linkage for region size in creations and conversions
...
of GridRegion. New variables for size and code to initialize same.
2013-11-02 15:40:48 -07:00
f66737fe56
varregion: Enforce the configuration of square regions in RegionInfo.cs.
2013-11-02 15:36:16 -07:00
2b069a3b1e
If the LSL state_entry() event definition contains any parameters, then generate syntax error as seen on the LL grid
...
This is done through the parser and so generates the same syntax error message if any parameters are wrongly specified for this event.
We were already enforcing event names in the parser.
This is only for state_entry so far as an initial test of the approach - appears to work correctly.
2013-11-02 00:39:12 +00:00
92c06a5d0b
varregion: fix lawn-mower terrain fill so it works for non-square regions.
...
Add some debugging logs on region creation to report region size.
2013-11-01 16:37:27 -07:00
976530569a
varregion: enforce multiple of 256 for region size when parameters fetched from user.
...
Output info and warning messages for non-legacy region sizes.
2013-11-01 16:06:19 -07:00
7faf286d00
add null check for jpeg2000 sculpt image decode failure. Note: the j2kDecodeCache folder should be cleared after updating to this revision so that sculpts containing alpha can be re-decoded and successfully meshed.
2013-11-01 13:45:09 -07:00
ff5885ab23
varregion: push TerrainData implementation up and down the database storage stack.
...
Implement both LoadTerrain and StoreTerrain for all DBs.
Move all database blob serialization/deserialization into TerrainData.
2013-11-01 11:35:31 -07:00
ce94f990bb
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-11-01 01:42:43 -07:00
f4ded3af63
discard alpha in 4-plane sculpt textures before generating physics proxy mesh
2013-11-01 01:40:56 -07:00
db32e5d304
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-11-01 02:05:12 +00:00
c6395240f0
For individual bots, seed random number generator with a random number from BotManager rather than Environment.Tickcount
...
Otherwise, since bots are now created all at once, a bunch will get exactly the same tickcount and hence number sequences
2013-11-01 02:04:04 +00:00
cc73ef4eb9
add new particle system blending rule enumerations
2013-10-31 17:49:01 -07:00
cc7065f9ee
minor: change "bot" pCampBot help cateogry to "Bots"
2013-11-01 00:04:18 +00:00
4c4a1cf715
Start counting resent packets in the places that I missed when the stat was first added a few commits ago
2013-10-31 23:59:22 +00:00
50794c9008
minor: remove mono compiler warnings in AvatarPickerSearchModule and UploadBakedTextureModule
2013-10-31 23:51:01 +00:00
3d5a7e9b19
Add OutgoingPacketsResentCount clientstack stat.
...
This allows one to monitor the total number of messages resent to clients over time.
A constantly increasing stat may indicate a general server network or overloading issue if a fairly high proportion of packets sent
A smaller constantly increasing stat may indicate a problem with a particular client-server connection, would need to check "show queues" in this case.
2013-10-31 23:45:52 +00:00
b7c57294cc
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-10-31 23:45:19 +00:00
eb52d346c0
add new LSL constants associated with new "ribbon", "glow", and "blend" particle system functionality. Note that this does *not* complete required server side changes for implementing the new particle system
2013-10-31 16:13:03 -07:00
0e07fad2e1
minor: update pCampbot usage/help statement
2013-10-31 20:19:57 +00:00
39777db8ef
varregion: fix problem of X/Y dimensions swapped and incorrect terrain
...
compression base computation.
Complete replacement of float[] for terrain heightmap with TerrainData instance.
2013-10-31 09:24:06 -07:00
46a4c32e27
update libomv to 5b4c1e8694479629f7cacd72dd6bc39a6b327f9c (git master as of time of this commit)
2013-10-30 22:01:34 -07:00
fdd1c63c3c
Make "fcache status" command also display information on disk/mem cache hit rate that is currently only displayed if LogLevel >=1 in [AssetCache] config
2013-10-30 18:57:51 +00:00
28f36d8db5
Put fcache commands output to console, not log
2013-10-30 18:32:53 +00:00
edaf0a98d6
Give the caller AddMapTile a valid reason response if this failed due to blank response from server or connection failure.
...
Raise log lines which indicate problems to warning from debug
2013-10-29 23:37:22 +00:00
26c2d9e627
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-10-28 23:48:43 +00:00
39de7614ec
Remove legacy sqlite lines added internally by OpenSimulator to the [Startup] section.
...
These are long unused but confusingly will be seen in the [Startup] section on a "config save".
2013-10-28 18:03:34 +00:00
2be0347f50
Merge branch 'master' into varregion
2013-10-28 09:30:26 -07:00
d23ef79f98
BulletSim: restore collision flags when clear collision cache.
...
THis fixes the extranious addition of objects to the collision cache
which created extra CPU overhead.
2013-10-26 21:30:51 -07:00
93d5d66fbd
BulletSim: update collision flags to make sure they fit in the shorts provided.
2013-10-26 21:20:19 -07:00
5be8f6632b
minor: Fix commented out GridInfo service URL to be 8002 in Robust.ini.example rather than 9000 (already done in Robust.HG.ini.example)
2013-10-25 00:54:33 +01:00
df76e52310
minor: Add commented out code for apparent passing of texture IDs in ObjectProperties UDP replies to viewer
...
Not yet shown that this is used or resolves a bug where not all textures appear on objects with an "XML with textures" upload from singularity 1.8.3
Proper texture entries are actually present and appear properly on relog, but not on select from viewer until at least one face texture is changed.
2013-10-24 23:00:02 +01:00
31989bd51e
Show texture ids for full object/part info console commmds
2013-10-24 21:29:57 +01:00
cccdfcb59e
Comment out LLUDPServer.BroadcastPacket() to reduce code complexity. Appears to be a never used method.
2013-10-24 00:37:49 +01:00
5d61c4039d
Only set the data present event if we actually queued an outoing packet (not if we sent immediately)
2013-10-24 00:33:14 +01:00
511122834b
BulletSim: change collision flags for groundplane to not interact with static objects.
...
Reorder collision flag setting code for terrain to fit pattern used elsewhere.
2013-10-23 16:07:03 -07:00
4830431eb0
Add current .NET windows framework requirement to README.
2013-10-22 01:02:40 +01:00
a7e7bed660
BulletSim: update SOs and DLLs with version that enables compressed
...
AABB maps for Bvh meshes. This greatly reduces the memory usage for
large meshes and for mesh terrain in particular.
2013-10-19 11:44:27 -07:00
84a149ecbf
Call ScriptSleep() instead of llSleep() in routine for llEmail.
...
Signed-off-by: teravus <teravus@gmail.com>
2013-10-18 14:30:05 -05:00
571a75f934
BulletSim: update lib32/libBulletSim.dylib to current BulletSim C++ API.
2013-10-18 09:15:08 -07:00
0094971186
After finishing to edit an attachment, let other avatars see the changes. (The changes weren't visible before because updates to attachments aren't sent while the attachment is selected.)
2013-10-17 23:10:16 +01:00
Justin Clark-Casey (justincc)