a5100cafee
BulletSim: fix terrain mesh generation for problem with regions that have unequal edge heights. Thanks UBit.
2012-11-27 10:03:55 -08:00
68fe7dff20
BulletSim: reorganize angular movement routine into separate subroutines enabling external calibration routines and unit testing.
2012-11-27 10:03:49 -08:00
59554758b1
BulletSim: implementation of vertical attraction motor.
2012-11-27 10:03:44 -08:00
9e0db36c82
BulletSim: add 'infinite' timescale that does not reduce motor target or friction.
2012-11-27 10:03:38 -08:00
16e4019eca
Fix database service unit test failures by temporarily reverting BasicDataServiceTest extending OpenSimTestCase.
...
Mono 2.4.3 doesn't like this when running nunit, with nunit throwing
AssetTests`2 : System.MemberAccessException : Cannot create an instance of OpenSim.Data.Tests.AssetTests`2[TConn,TAssetData] because Type.ContainsGenericParameters is true.
and similar. Mono 2.10.8.1 does not have this issue.
So will wait until min version of mono bumps before restoring.
2012-11-26 22:25:36 +00:00
5685b33071
BulletSim: increase vehicle stability by suppressing Bullet's update to angular velocity.
2012-11-26 10:47:34 -08:00
084e3926ca
BulletSim: use m_angularMotor to do the basic movement. Add the setting of same. Rename the angular forces and add comments to match MoveAngular to the form of MoveLinear.
2012-11-25 20:04:33 -08:00
d7126a14e1
BulletSim: up the vehicle angular damping to 0.95. Still trying to overcome the movement added by Bullet.
2012-11-25 20:04:33 -08:00
4c077a0694
BulletSim: organize MoveLinear code for understandability. Make LIMIT_MOTOR_UP contribution a velocity and not a force.
2012-11-25 20:04:32 -08:00
f977131fe0
BulletSim: add ToString override to BSVMotor.
2012-11-25 20:04:32 -08:00
319ec3235c
BulletSim: add BSVMotor as BSDynamics linear motor.
...
Properly limit *_MOTOR_DECAY_TIMESCALE to 120 as per specs.
Invode BSDynamics.Refresh() when vehicle type is changed. Previously
the vehicle properties weren't getting set because the physical
properties were set before the vehicle type was set.
Add a "use name" to BSMotors for identification while debugging.
Correct current and target confusion in BSVMotor design.
Rename CurrentValueReductionTimescale to FrictionTimescale.
Event more detailed logging.
2012-11-25 20:04:31 -08:00
bd635e264a
BulletSim: update DLLs and SOs with new collision margin setting function.
2012-11-25 20:04:31 -08:00
9b98011714
BulletSim: update OpenSimDefaults.ini with current default values for friction and collision margin. Remove some of the BulletSim parameters that are very esoteric and dangerous. Most of the remaining parameters are features one can 'see'.
2012-11-25 20:04:30 -08:00
980edabc2e
BulletSim: clean up TODO list. It is kept somewhere wlse that should be more public. Add error logging for the detail log writer so a message is output when it cannot write to the specified logging directory. Modify friction defaults to be closer to ODE's values. Add new collision margin and vehicle angular damping parameters.
2012-11-25 20:04:29 -08:00
9a42405944
BulletSim: small change to add position correction force with AddForce rather than just storing it in the variable
2012-11-25 20:04:28 -08:00
22d5bf8ff9
BulletSim: complete vector motor. Correct line endings.
2012-11-25 20:04:28 -08:00
d1480ac7ee
BulletSim: add terrain collision margin and vehicle angular damping
...
parameters to the parameter block.
New API call for setting collision margin.
2012-11-25 20:04:27 -08:00
c3f30fef96
BulletSim: add parameter for terrain collision margin.
...
Add locking around unlikely but possible race conditions on terrain list.
2012-11-25 20:04:27 -08:00
4ae30873ad
BulletSim: Add tables and initialization for different attributes for different materials. For the moment, the per material tables are not used.
2012-11-25 20:04:26 -08:00
02db8b9adb
Combine TestDeleteSceneObjectAsync() with TestDeRezSceneObject() as they are functionally identical.
...
Move TestDeleteSceneObjectAsync() and TestDeleteSceneObjectAsyncToUserInventory() from SceneObjectBasicTests -> SceneObjectDeRezTests
2012-11-24 03:49:23 +00:00
a4ce63d0cd
Fix regression TestDeleteSceneObjectAsyncToUserInventory by adding a BasicInventoryAccessModule() and re-enable in test suite.
2012-11-24 03:38:15 +00:00
22d4c52ffc
Consistenly make NUnit test cases inherit from OpenSimTestCase which automatically turns off any logging enabled between tests
2012-11-24 03:15:24 +00:00
e9be85442f
In ArchiverTests, use the local instantiated SceneManager rather than potentially cross-contaminating tests by relying on the static SceneManager.Instance
2012-11-24 02:57:43 +00:00
82690e1384
Fix bug where loading an OAR with a deeded parcel would always set the parcel owner ID to the estate owner even if the group UUID was present.
...
Aims to address http://opensimulator.org/mantis/view.php?id=6355
As part of this work, an incomplete IXGroupsData was added which currently only allows store/fetch/delete of group records
(i.e. no membership data etc)
This is subject to change and currently only an in-memory storage implementation exists for regression test purposes.
2012-11-24 02:43:31 +00:00
cda531bc3c
minor: Add some currently commented out debug log lines for investigating issues resolving group IDs for land parcels on OAR loading where groups do not exist
2012-11-23 05:44:31 +00:00
999cb4b20c
Make "show threads" and "thread abort" console commands available on all servers
2012-11-23 04:40:49 +00:00
e0a3e01850
Make "force gc" console command available across all servers
2012-11-23 04:27:04 +00:00
4b46a0d536
Make "show version" console command available across all servers
2012-11-23 04:19:08 +00:00
065d6d6fe1
Delete unused BaseHttpServer.HandleAgentRequest()
2012-11-23 04:15:21 +00:00
edbdbd44b9
Enable further client stack packet pooling by default by setting RecycleBaseUDPPackets = true by default.
...
This reduces base memory churn of every client connection, improving the garbage collection situation.
The effect is a significant portion of base load (an avatar standing still on a completely blank island)
but will probably still be swallowed up by other memory use on active regions.
Tests have shown no noticeable impact on speed of processing incoming packets, though setting remains
in case a switch back is needed.
2012-11-23 04:09:45 +00:00
acc1810af2
minor: remove some mono compiler warnings
2012-11-23 04:08:17 +00:00
1f336579c8
minor: Make note in log if scene was restarted due to an unrecoverable physics error
2012-11-23 04:06:48 +00:00
f473252fa8
Add AllowRegionRestartFromClient setting to [EstateManagement] section of OpenSim.ini.
...
Setting this to false will block all restart requests from the viewer even if they are otherwise legitimate.
One use is to block region restarts if necessary whilst restart functionality remains buggy or triggers bugs in modules,
though these should be fixed as soon as practicable.
Default is true, as has been the case historically.
2012-11-23 03:56:53 +00:00
36c6edac69
Remove the redundant BypassPermissions() checks in EstateManagmentModule.
...
This is repeated in the PermissionsModule and checking it earlier does not allow a force override of the bypass value
2012-11-23 03:29:50 +00:00
9b60c14bb1
minor: Add some console feedback on region restart and log who requested a region restart if done from the viewer.
2012-11-23 03:05:30 +00:00
8c8c8a00a4
Fix problem where restarting the currently selected region would stop various console commands (e.g. "show users") from working.
...
This was because the "currently selected" scene reference was being left as the dead scene instead of the restarted Scene object.
2012-11-23 02:22:30 +00:00
049987925d
Add regression test for checking scene close when SceneManager is asked to close
2012-11-23 02:05:30 +00:00
eb1921ff93
Add "help all" console command which will list all commands alphabetically in a single list
2012-11-23 01:52:48 +00:00
7133b6bb4f
Fix recent windows build break.
...
Add missing OpenSim.Framework.Servers reference
2012-11-23 01:43:11 +00:00
61808d148e
Fix regression where we stopped closing scenes on simulator exit.
...
If we don't do this, then these scenes don't get deregistered from the grid, amongst other things.
Regression was introduced in commit 8c130bc
2012-11-23 01:01:39 +00:00
3b2caa63b0
Rename BulletSim's PhysicsShapeType to BSPhysicsShapeType because it
...
conflicts with PhysicsShape type defined in later libOMV
2012-11-22 14:45:41 +00:00
3ce00e97cc
Factor out command script code.
...
This also allows comments in command scripts (lines starting with ;, # or //) to be used across all servers
2012-11-22 05:57:20 +00:00
9fcf3f1a3f
Make "config show/set/get/save" console commands available on all servers
2012-11-22 05:48:41 +00:00
8269d2b893
Factor out common pid file creation and removal code.
...
Log path at which pid file is created or reason for failure to create.
2012-11-22 05:14:43 +00:00
42e87a6582
Add "get log level" command - this returns the current server session console logging level.
...
This supersedes getting information by calling "set log level" without a 4th argument, which is confusing.
2012-11-22 04:57:45 +00:00
34ff96a119
Remove unused BaseOpenSimServer.ShowHelp()
2012-11-22 04:52:29 +00:00
4c4379b50f
Make "set log level" command available across all servers
2012-11-22 04:50:09 +00:00
45d1e6ab09
Make "show info" command available across all servers
...
This helpfully lists version information, startup location and console log level
2012-11-22 04:45:53 +00:00
cf03d6ea92
Factor out common registration of "show uptime" command
2012-11-22 04:11:03 +00:00
5c48d7a378
factor out common HandleShow code for "show uptime"
2012-11-22 04:05:09 +00:00
Robert Adams