This resends appearance uuids to avatars in the scene once a minute.
I have seen this help in the past resolve grey appearance problems where viewers have for unknown reasons sometimes ignored the packet.
The overhead is very small since only the UUIDs are sent - the viewer then requests the texture only if it does not have it cached.
This setting will not help with cloudy avatars which are usually due to the viewer not uploading baked texture data or uploading something that isn't valid JPEG2000
This is because libopenjpeg 1.5 appears to require a minimum of glibc 2.14, whereas at least one fairly recent distro (openSUSE 11.4 from 2011-03-10) only has glibc
Further investigation pending.
Among other things this allows pCampbot to work under Windows since libopenmateverse now ships the same log4net.dll (publicly signed) as OpenSimulator
This also updates the libopenmetaverse embedded libopenjpeg from 1.3 to 1.5.
DLL naming and mapping for non-Windows libopenjpeg changes to remove version number to make future udpates easier and bring it into line with names of other shipped DLLs.
libopenjpeg updates have been made for OSX, Windows (32 and 64 bit) and Linux (32 and 64 bit). Please report any issues.
Fix inconsistencies between configuration parameter names and their description names. Changing the configuration parameters for non physical prim size min-max from Nonphys* to NonPhys*.
Please update your OpenSim.ini and Regions.ini to reflect these changes.
This is to resolve a problem where an asset marked as local but not temporary but still used in the scene would be removed.
The timed expiry scan no longer tries to refetch assets from the scene that are not currently in the cache - this is not helpful since it just drags a lot of data into the cache that may never be referenced.
This removes the DeepScanBeforePurge option since setting this to false will introduce the above problem. This previously had a default of true.
Viewer LL 3.3.4 and before sometimes fail to properly redisplay dynamic textures that have a small data length compared to pixel size when pulled from cache.
This appears to happen when the data length is smaller than the estimate discard level 2 size the viewer uses when making this GetTexture request.
This commit works around this by always regenerating dynamic textures that fall below this threshold rather than reusing them if ReuseDynamicTextures = true
This can be controlled by the [Textures] ReuseDynamicLowDataTextures config setting which defaults to false.
If true, this setting reuses dynamically generated textures (i.e. created through osSetDynamicTextureData() and similar OSSL functions) where possible rather than always regenerating them.
This results in much quicker updates viewer-side but may bloat the asset cache (though this is fixable).
Also, sometimes issue have been seen where dynamic textures do not transfer to the viewer properly (permanently blurry).
If this happens and that flag is set then they are not regenerated, the viewer has to clear cache or wait for 24 hours before all cached uuids are invalidated.
CUrrently experimental. Default is false, as before.
This is necessary because commit 8131a24 (Tue Mar 27 10:08:13 2012) started passing the config section name rather than hardcoding "AssetService"
This meant that the HG external-facing asset service tried to read ConnectionString from [HGAssetService] rather than [AssetService].
On SQLite, not finding this meant that it fell back to [DatabaseService], which is set for OpenSim.db rather than Asset.db.
Therefore, all external asset requests returned null.
Solution taken here is to create an [HGAssetService] section with the same ConnectionString as [AssetService].
This bug does not affect normal MySQL/MSSQL config since they use the [DatabaseService] connection string anyway.
Addresses http://opensimulator.org/mantis/view.php?id=6200, many thanks to DanBanner for identifying the exact problem commit which was very helpful.
This was a regression from OpenSimulator 0.7.3.1 which did not contain this bug.
This also fixes computation of avatar mass.
Added parameter MaxPersistantManifoldPoolSize.
Fixed a parameter setting bug which caused crashes of there were
more than 400 or so physical objects. I tested up to 5000.
Updated BulletSim DLLs and SOs.
Add description and default of false (as before) to OpenSimDefaults.ini
If set to true, this config switch will resend avatar appearance information (a small amount of UUID data, not the baked textures themselves) to other avatars in the sim every 60 seconds.
For me, this has helped with situations where avatars appear persistently grey - the LL viewer sometimes did not appear to request assets the first time the appearance data was sent.
However, this switch will not help with other appearance failure situations (e.g. failure to bake assets).
This setting is experimental but will not have any significant impact on the simulator if turned to true.
This is to try and resolve a strange Initialization exception for the AppearanceManager type that only occurs on Windows 64 bit (not Windows 32 bit or Linux!)
Built from https://github.com/openmetaversefoundation/libopenmetaverse/commits/master
This update incorporates a fix by Melanie in libomv where textures would sometimes rotate slightly when other properties were changed.
Hence addresses http://opensimulator.org/mantis/view.php?id=6100
This update also incorporates libomv bot code updates that significantly reduce the warning spam for pCampbot.
The change rate of libomv is low and many changes refer to bot or code not used by OpenSimulator, so I think it is sufficiently stable to use evne though it's not a release.
and into its own class. The BulletSim data structures track
individual prims as linksets of 1 so most of the prim code is not
different between a linked and unlinked object.
Only files ending in .ini and .xml are actually loaded.
Also improves the help at the top of Regions.ini.example to mention that OpenSimulator would generate Regions.ini anyway on first startup.
Also changes separator from comma to bar to match existing [LoginService] config features.
Divergence of config names for identical facilities in different places makes for an unnecessarily confusing user experience.
This is to provide an indication of what's happening now that the default isn't to report every single script start.
Changes XEngine logging level in OpenSim.exe.config from WARN to INFO.
This is to reduce log spam from script loading, which is especially spammy for avatar movements with scripted attachments.
All important messages are at warn or above.
If you still want/need to see these messages, set <level value="DEBUG"/> in the <logger name="OpenSim.Region.ScriptEngine.XEngine"> section of OpenSim.exe.config.
This affects no other package logs, which still output at the root configured level (currently DEBUG by default).
The packet was actually being handled but not acted on.
This change extends the default timeout for paused clients to 5 minutes
and makes both the paused and non-paused timeout periods configurable.
If active, the physics module can return arbitrary stat counters that can be seen via the MonitoringModule
(http://opensimulator.org/wiki/Monitoring_Module)
This is only active in OdeScene if collect_stats = true in [ODEPhysicsSettings].
This patch allows OdeScene to collect elapsed time information for calls to the ODE native collision methods to assess what proportion of time this takes compared to total physics processing.
This data is returned as ODENativeCollisionFrameMS in the monitoring module, updated every 3 seconds.
The performance effect of collecting stats is probably extremely minor, dwarfed by the rest of the physics code.
Without this, LL 3.3.1 continually pushes LLInventoryModelFetchDescendentsResponder::error 499 to its log.
This cap will be ignored by older viewers - UDP inventory will work normally.
This is because the viewer doesn't receive a timezone from the server but bases its displays on Pacific Standard Time.
However, it still expects to receive notification from the server as to whether or not Daylight Savings Time for PST is in operation.
This commit introduces a new DSTZone setting in the [LoginService] config setting that accepts a list of timezone names valid across different platforms to calculate Pacific DST.
If you need the old behaviour of calculating DST based on the local timezone of the server running the login service, then please override DSTZone with "local".
A mailing list announcement will be made later.
Thanks to Olivier Van Helden and Gudule Lapointe for determining this behaviour and providing this patch.
From http://opensimulator.org/mantis/view.php?id=5972
folder when deleting objects from a scene. The use of the trash
folder causes assets to be created and stored everytime you delete
an object from the scene (slows down the delete and adds mostly useless
assets to your database).
Default is on (use the trash folder) which is the standard behavior.
Value for this setting in OpenSimDefaults.ini (1000) is same as setting in code (1000) so this should have no effect
Thanks to Ovi Chris Rouly for pointing this out.
The asset data plugin now implements IXAssetData rather than IAssetData so the ordinary AssetService should no longer pick it up.
This replaces the changes in 92b1ade. There is no longer any need to adjust your StandaloneCommon.ini/Robust.ini/Robust.HG.ini files.
This may explain very recent issues in the last few weeks where textures have been disappearing or turning white (as they were going to different places).
Unfortunately, you will need to rollback to an earlier database backup or reupload the textures.
People using standalone in master, please update your StandaloneCommon.ini according to this change.
People using robust in master, please update your Robust.HG.ini.example[.HG].ini according to this change.
It would certainly be nice to change the default script on disk, but this is currently unused and isn't a suitable default.
At this location it would also stop an easy manual deletion of script engine compiles and state.
This is configured in the new [Estates] section of OpenSim.ini.
If a default estate is configured then all new regions are automatically joined to it instead of asking the user.
If the default estate does not already exist then it is created.
Current default behaviour remains the same - the user is asked for estate details when necessary.
Thanks to Frenando Oliveira for the patch which I adapated further.
In this zip, it's called System.Data.SQLite.dll. We rename it to lib64/sqlite3.dll
This is a little unexpected but it works. For some reason my hand-rolled one in Visual Studio 2008 did not.
This is sqlite 3.7.10. Other libraries are still currently 3.7.6 but this should make no difference.
This should make it possible to use OpenSim.exe on 64-bit Windows now, though currently the bullet physics plugin will still complain (can be ignored if you are not using bullet).
In over 4 years this never progressed beyond an unimplemented stub.
This doesn't mean that it can't come back if someone is interested in implementing PhysX support.
In theory, this means that a 64-bit Windows OS user can now run OpenSim.exe with ODE and use more than 2 (or 3) GB of memory.
However, this is completely untested since I don't currently own a 64-bit Windows box. Feedback appreciated.
Using OpenSim.32BitLaunch.exe should continue to work. Other platforms are unaffected.
This will currently not work with sqlite - I will add that too if this works.
If velocity reaches 256 in any vector then bad things happen with ODE, so we now clamp this value.
In addition, a falling avatar is clamped by default at 54 m/s, which is the same as a falling skydiver.
This also appears to be the value used on the linden lab grid.
This should resolve http://opensimulator.org/mantis/view.php?id=5882
These can be run using the "nant torture" target. They are not part of "nant test" due to their long-run future nature.
Such tests are designed to do some testing of extreme situations and give some feedback on memory usage, etc.
However, data can be inconsistent due to different machine circumstances and virtual machine actions.
This area is under development.
This reverts commit 4eef6725f4.
Reverting for now since this fails with "terminate called after throwing an instance of 'std::bad_alloc'" on Wright Plaza instances.
The osGetGrid**** functions will now get the grid settings from the GridInfoService. Set the GridInfoURI in your ./bin/config-include/GridCommon.ini [GridInfo] section.
As discussed on the opensim-dev mailing list, this is to avoid a demonstrated ODE collider segfault when stress-testing a simulator running more than one region using the bundled pCampbot.exe
As before, the ODE revision used is r1755 - only the collider has changed.
Tests so far reveal little performance change.
However, if noticeable issues do arise, please report on mantis and/or the opensim-dev mailing list.
The previous libraries are temporarily in bin/Physics-previous-ode-libs
These can be copied back to bin if one wants to compare behaviour with the previous libraries.
Add configuration option - DEBUG to enable debugging methods. This is temporary for helping users testing teleport routing be able to report back the data with the test cases. We can remove when finished with this, or leave it if it proves to be useful.
Users: set DEBUG = true in OpenSim.ini to get more information from teleport routing. The default is false. It presently prints the TeleportFlags value.
Naturally, default is true.
When set to false, "phantom" flags on prims can be set as usual but all prims remain phantom.
This setting is for test purposes.
This switch does not affect the collision of avatars with the terrain.
Enabling this by setting Cap_FetchInventoryDescendents2 = "localhost" in the [ClientStack.LindenCaps] section of OpenSim.ini downloads inventory via http rather than udp in later viewers.
This will hopefully address mantis 5471, 5694 and 5718.
This code is now in opensim-libs, along with Diva's slightly older patches (which were already applied to the DLLs in the opensim tree).
Thanks Oren!
From field experience, we know that simulators can be unstable if a user logs in before the scripts have finished loading.
This commit turns login_disable = true in [RegionReady] on by default which prevents this from happening.
If you want the old behaviour, please copy these section from OpenSimDefaults.ini into OpenSim.ini and set login_disable = false
This is to allow broader subsitution in the future. Currently, the only substitions are \R (for region name) and \\ (for a single backslash)
e.g. "Region (\R) " is the current and continuing default prompt
This renames custom_prompt in [Startup] to ConsolePrompt
PARCEL_GROUP, PARCEL_OWNER, ESTATE_MANAGER and REGION_OWNER can be combined with the existing agent uuid option to limit ossl functions to agents and owner classes.
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
These are disabled by default, as before. Please only turn these on in secure grids, since they allow the same facilities as the existing SetPassword call (also disabled by default)
These facilities can be helpful when integrating external systems, in addition to the existing option of adapting an IAuthenticationService or using WebLoginKey
This is to make it easier to change all these names at once, where all grids services are running from the same location.
Also rearranges some lines in [Modules] so that StandaloneCommon.ini.example and GridCommon.ini.exmaple are consistent.
Diva Canto