fd69251bcd
alters a problem path cut angle for the cylinder prim profile
2008-07-06 02:04:24 +00:00
13d6615263
Adds experimental Meshmerizer support for "prim torture" effects of sphere dimple on prim types box, cylinder, and prism
2008-07-02 17:08:52 +00:00
b0287a43bd
disables spam-like debugging messages inadvertently left on in last commit (oops)
2008-06-30 06:11:43 +00:00
7077cffe52
Corrects Meshmerizer orientation of profile cut angles for ring type prim
2008-06-30 06:08:43 +00:00
a944ef4947
Corrects meshmerizer profile cut angle orientation for tube type prims
2008-06-30 02:08:27 +00:00
0260b33517
Altered prim description/debugging message code to be more warning friendly
2008-06-28 18:04:04 +00:00
c06dbf4fe5
Mantis#1620. Applied Melanie's patch
2008-06-28 16:13:11 +00:00
8b8b45267e
altered prior warning fix to Meshmerizer.cs to allow mesh debugging code to function
2008-06-28 00:16:41 +00:00
7d55dfba8a
dr scofield's warnings safari:
...
* commenting out unused variables
2008-06-27 17:25:03 +00:00
a2b1a1787d
Minor formatting cleanup.
2008-06-25 14:30:28 +00:00
bc66a851d6
Modifies box prim profile cut parameters to avoid angles which cause spurious triangles in mesh
2008-06-25 07:17:36 +00:00
7b4991430b
Changes selection criteria to allow meshing of more sphere prim configurations.
...
Adds comments to some functions in Meshmerizer.cs.
2008-06-21 08:50:56 +00:00
1d91613679
* Patch from Dahlia - 0001576: Exception of type 'System.OutOfMemoryException' was thrown .Void set_Capacity(Int32), with regards to sphere mesh. Thanks Dahlia!
...
* Also allows a sphere to be hollow with no cuts or dimples. (walking around inside the sphere).
2008-06-19 17:21:17 +00:00
e6ce30d4f1
* 0001571: (PATCH) patch to implement editable sphere meshes for meshmerizer/ode (Initial Implementation) from Dahlia! Thanks Dahlia!!!
...
* The included patch implements the editor parameters twist, dimple, path cut, and profile cut to the sphere mesh for meshmerizer. The mesh will default back to the geodesic sphere if the parameters are adjusted to beyond a reasonable arbitrarily chosen threshold that would expose too many inverted normals on the mesh.
2008-06-19 04:17:04 +00:00
11d68ce0f5
* 0001558: [PATCH] Add support for full collision geometry feature set for linear path prims (patch attached) By Dahlia. Thanks Dahlia!
...
* This update re-does the cube/cylinder/prism prims to dynamically add faces as twist is used.
2008-06-15 19:34:48 +00:00
832d609b44
PATCH : 0001431: corrections to torus physical mesh for default hollow shape and taper orientation along path.
...
--------- From Dahlia! Thanks Dahlia!!!
the attached patch reinstates the default hollow shape of the physics mesh of the torus prim type and corrects the orientation of the effects of taper on the profile along the path.
2008-06-02 08:31:34 +00:00
52c55c8c23
* Applying Dahlia's patch : 0001429: Patch to fix prism physical mesh and add path start and end to skew z offset of circular path prim meshes (PATCH attached)
...
* Apparently this fixed a bug in my code that caused PushX to appear to work and pushX didn't appear to work after the patch.. so I fixed that after applying this patch and PushX actually works now.
2008-06-01 04:33:07 +00:00
0462510956
Update svn properties. Formatting cleanup.
2008-05-30 08:35:57 +00:00
918f887c0c
* Applying Dahlia's interim path curve patch. it adds initial support for some tori/ring parameters. Thanks Dahlia!
...
* Some situations do not match the client's render of the tori, we know and are working on it. This is an initial support patch, so expect it to not be exact.
* Some tapers are acting slightly odd. Will fix.
2008-05-29 20:20:50 +00:00
00a1f0bab0
* This finishes the ODE options section of the OpenSim.ini.example. I've added 44 configurable options!
...
* This includes if you want to mesh sculpties and the Level of detail on the sculptie meshing for non physical and a separate LOD on physical sculpties.
* The options range from gravity.. to avatar movement speed, to friction management.. to object density.. to update throttling.
2008-05-16 20:16:33 +00:00
65c5efe43b
Formatting cleanup.
2008-05-16 01:22:11 +00:00
6a1b787436
More formatting cleanup.
2008-05-14 05:33:32 +00:00
c995d60d37
Formatting cleanup.
2008-05-14 05:11:23 +00:00
fcc23be577
* Fixed directory not found when saving Mesh previews (my bad, I was testing)
2008-05-13 05:06:58 +00:00
e70da2e174
* Committing meshmerizer patch from Dahlia. Thanks Dahlia!
...
* 0001241: physics cylinder proxy distorted and square hollow misaligned (patch attached)
* The included patch corrects the outer shell of the meshmerizer proxy for the cylinder prim to eliminate spurious vertices and shape distortion, and corrects the orientation of the square hollow.
* The size and orientation of the square hollow for the prism prim has been corrected also.
2008-05-13 04:16:16 +00:00
b7baa3cd2a
* Valid Sculpted prim now collide properly.
...
* The first time you set the sculpted texture of a prim you might have to futz with it to get it to generate a sculpted physics proxy
* Note that there are already issues in Trunk, (such as the prim scaling issue and prim jumping issue. Essentially editing is difficult right now)
* This just adds to the experimental nature of trunk. :D
2008-05-09 07:50:00 +00:00
6bb4ab0563
* Applying Dahlia's Triangular hole in a cube peg patch. Fixes the hollow orientation in a cube in the meshmerizer. Thanks Dahlia!
...
* See mantis 0001203 for more details!
2008-05-09 02:00:55 +00:00
fef3b36894
* Optimised using statements and namespace references across entire project (this took a while to run).
2008-04-21 07:09:17 +00:00
b85624db18
* Adds twist support for Cubes, Cylinders, and Prisms in the Meshmerizer
...
* A tweak of the SimStatsReporter so it would report the prim capacity to be 45000.
2008-04-10 00:31:44 +00:00
95e31c9f02
* Added stretchable ellipsoid support with configurable LOD. It's actually a split facet icosahedral geodesic sphere that's scaled.
...
* In other words, you can stretch spheres into oblong shapes now and watch them roll around like a football would.
* Still can't cut, twist or profile cut spheres yet.
2008-04-08 05:03:43 +00:00
d0f7784101
* Adds poor support for ellipsis in the Meshmerizer. This will get better.. notice the huge nasty facets! Regular spheres still work as they did.
2008-04-08 01:29:45 +00:00
e409892a9c
* Updated ODE.NET bindings to the ODE library.
...
* Fixed some Tapers with Cylinders in the Meshmerizer
2008-04-07 22:11:41 +00:00
9d1b42c39a
Comment out unused private methods.
2008-03-25 03:49:08 +00:00
47180080f0
Formatting cleanup.
2008-03-18 05:16:43 +00:00
a8cfbbe963
Minor cleanup.
2008-02-20 18:38:20 +00:00
cfc9ee4265
* Adds limited support for each hollow type for the supported prim., Cube with a triangle hollow, Cube with a cylinder hollow, cylinder with a triangle hollow, etc.
...
* More work needs to be done here as several of the profileshape/hollow combinations are rotationally offset from where they render in the client.
2008-02-19 16:01:14 +00:00
62f608b152
*rawfile fix.
2008-02-19 08:57:43 +00:00
e789a6bc9b
* This patch adds Prism support to the Meshmerizer. Prism is one of the object types in the drop down on the object tab. Positive tapers are slightly incorrect(prim sinks into ground a tiny bit). Everything else that's supported works as expected. Hollow, cut, negative tapers, top shear.
2008-02-19 08:49:38 +00:00
e3a711536b
* ODE - This fixes a few things and breaks a few more.
2008-02-14 01:57:19 +00:00
e207284fef
Clean up logging calls using String.Format explicitly
2008-02-10 01:57:59 +00:00
c9b5516ca8
* Adds Top Shear support to the Meshmerizer for the Cube prim and the Cylinder prim.
2008-02-09 05:18:52 +00:00
fadf5b479f
* Added Taper support to the Meshmerizer for Cube and Cylinder.
...
* Removed the hull verbosity
2008-02-08 23:28:38 +00:00
b63c267f0b
* Finished Cylinder in the Meshmerizer. Hollow and Path cut work for it now. Enjoy the new physics-friendly prim type.
2008-02-08 22:11:28 +00:00
3be2e772ec
* Removed a statement that crashes the Meshmerizer if you don't have a specific /dev/ folder
2008-02-08 12:07:39 +00:00
7d77fa6a9d
* Okay, fixed the path cut offset, however the inner wall isn't properly 'cut' from the hull, so slightly better support, but still limited.
2008-02-08 11:44:27 +00:00
50acb8e634
* This update adds limited support for Cylinder meshed prim in the Meshmerizer plugin. (Limited because path cut is wrongly offset and while Hollowing works, you can walk through the inside wall.)
2008-02-08 11:32:56 +00:00
6ed5283bc0
Converted logging to use log4net.
...
Changed LogBase to ConsoleBase, which handles console I/O.
This is mostly an in-place conversion, so lots of refactoring can still be done.
2008-02-05 19:44:27 +00:00
efd90b56b7
* Optimized usings
...
* shortened references
* Removed redundant 'this'
* Normalized EOF
2007-12-27 21:41:48 +00:00
db174dfa20
set svn:eol-style
2007-11-11 09:19:21 +00:00
cb07ba0d68
* Moves the Meshmerizer to a separate plugin
...
* Experimental. Linux Prebuild needs testing.
* One more update after this to remove the ODEMeshing directory....
2007-11-10 19:13:52 +00:00
Dahlia Trimble