40300c886c
refactor: Factor out AddSubMesh() method from long CraeteMeshFromPrimMesher() method
...
Also remove some of the logging spam left in from the last commit.
2011-07-08 20:36:01 +01:00
b18ef976ff
Fix interpretation of physics mesh proxies from mesh data
...
As per http://wiki.secondlife.com/wiki/Mesh/Mesh_Asset_Format , some submesh blocks may just have the flag "NoGeometry" to signal that they provide no mesh data.
If a block contains this, ignore it for meshing purposes rather than suffer a ClassCastException
This fixes physics proxy meshing, so you can now walk through mesh doorways, properly stand on the trailer of mesh trucks, etc.
To get mesh physics proxy, the UseMeshiesPhysicsMesh must be true in a [Mesh] config section in OpenSim.ini (example in OpenSimDefaults.ini).
Convex hull physics not currently supported.
2011-07-08 19:43:22 +01:00
29034bc0e0
minor: code tidy up - remove a couple of Console.WriteLine() accidentally added in the last commit
2011-07-08 18:34:44 +01:00
36df9ae79a
refactor: Separate the OdeScene class into its own file from OdePlugin.cs, to improve code readability
2011-07-08 18:16:48 +01:00
1dcad4ac66
minor: commented out log lines for future use and very small code tidy
2011-07-08 17:58:01 +01:00
3bda7711b3
Switch the MeshUploadFlag CAP module on and off with the existing config AllowMeshUpload flag in [Mesh] (in OpenSimDefaults.ini)
...
Default is on.
2011-07-07 23:49:19 +01:00
2fbc98fa5c
Make MeshUploadFlagModule non-shared rather than shared (since each scene needs its own cap)
2011-07-07 23:37:23 +01:00
e91861fff2
Ensure that the max transfer distance is initialized correctly.
2011-07-07 09:12:57 -07:00
4e30361f63
add myself to contributors.txt
2011-07-07 03:30:40 -07:00
281e80ccf3
add MeshUploadFlag capability fixed mesh upload with latest mesh viewer thank you dahlia and lkalif for helping to make this happen!
2011-07-07 03:30:37 -07:00
af8773d6d0
Add TestClearCache()
2011-07-04 23:05:31 +01:00
cb02fc44f5
add TestExpireAsset()
2011-07-04 23:03:05 +01:00
f58de55c84
refactor: Move test setup code into setup method
2011-07-04 22:59:36 +01:00
bebc51a6e0
Make it possible to disable the file part of the flotsam asset cache
...
This matches the ability to disable the memory part
This is controlled through the FileCacheEnabled parameter in FlotsamCache.ini
Default is true, so existing installations are not affected.
Improved fcache command feedback when various caches are disabled.
Re-enabled test for flotsam cache with file caching disabled.
2011-07-04 22:51:47 +01:00
5dc785bbf2
refactor: Split file cache manipulation code into separate methods, as has already been done for the memory cache
2011-07-04 22:30:18 +01:00
46f5893d55
Add basic flotsam asset cache test for retrieved cached asset.
...
Disabled temporarily since file system caching disrupts subsequent test runs
2011-07-04 21:35:15 +01:00
b8e7258051
If a user has the rights to edit a parcel's properties, then also allow them always to enter that parcel.
...
This is patch http://opensimulator.org/mantis/view.php?id=5567
Thanks Snoopy!
2011-07-02 01:14:29 +01:00
bb4cb16512
Add profile, merge, noassets and skip-assets options for loading/saving oars via RemoteAdmin
...
This is http://opensimulator.org/mantis/view.php?id=5453
Thanks Michelle Argus!
2011-07-02 01:05:03 +01:00
513d63455e
Create a very basic initial test which just creates an 'npc' and tests that the scene presence exists
2011-07-02 01:01:40 +01:00
ed12e38480
refactor: simplify existing npc code by creating them directly rather than indirectly via a timer
...
no obvious reason for doing this asynchonously, especially as the caller was sleeping in order to pick up the response anyway!
2011-07-02 00:18:15 +01:00
fba961c63f
Make default serverside_object_permissions = true since this better matches user expectations.
...
It also matches the default setting in the OpenSim.ini.example file
2011-07-01 23:06:46 +01:00
e765759f50
If OpenSim has been built from a git tree, then include version information automatically by dereferencing .git/HEAD
...
A blank bin/.version file will stop this being displayed.
2011-07-01 22:48:00 +01:00
759e855566
refactor: rename gitCommitFileName to manualVersionFileName since bin/.version doesn't necessary have to be a git hash
2011-07-01 21:47:30 +01:00
e41093635a
fix build break I just introduced
2011-07-01 21:37:03 +01:00
9f72fbcb75
Add an async inventory details sender to respond to FetchInventory packets.
...
If a user with a very large inventory right-clicks on their "My Inventory" folder, viewer 1 code will send a massive number of Fetchinventory requests.
Even though each is handled asynchronously via a pool thread, the sheer frequency of requests overwhelms the pool and freezes inbound packet handling.
This change makes the first Fetchinventory thread also handle subsequent requests, freeing up the other threads.
Further efficiencies could be made by handling all the items in a particular FetchInventory request together, rather than separately.
2011-07-01 21:25:40 +01:00
2d2c29ef3e
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-30 22:41:21 +01:00
a9b7487fcb
improve and tidy up some config file comments
2011-06-30 22:36:41 +01:00
03feb50a72
minor: adjust some indentation and spacing in OpenSim.ini.example for consistency
2011-06-30 20:26:17 +01:00
5c18ebf424
Allow physics proxy generation for meshes using new asset format.
...
Fix an invalid cast exception while decoding new mesh asset format.
2011-06-29 17:36:41 -07:00
c84a1bd99f
Don't follow inventory links of links.
...
This is to avoid problems with corrupt inventories where an inventory link target points back at the source's folder
No viewer has been observed to set these up as of yet. If this ever happens, we will need a more sophisticated solution to track sent folders within the recursion
2011-06-29 01:33:41 +01:00
1b4c08730e
refactor: simplify redundant double containing folder check
2011-06-29 00:56:35 +01:00
3f0b8db0c1
If an inventory link target is in the same folder as the source, then don't recursively request that folder.
...
Currently, this should never actually happen but certainly best to handle this case
2011-06-29 00:54:53 +01:00
22f25fae38
Hack around with the NPC module to get osNpcCreate() partially working again.
...
This now creates an avatar but appearance is always cloudy.
Move doesn't work.
Really, creating an NPC should only involve a ScenePresence rather than doing anything with IClientAPI, since an NPC has no viewer to communicate with!
2011-06-29 00:28:22 +01:00
ee92f22f2a
[PATCH 2/2] [FIX] osGetPrimitiveParams() and osSetPrimitiveParams()
...
crashes throwing System.NullReferenceException
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-06-28 11:48:29 -04:00
80010f8908
[PATCH] osSetSpeed() will accept float number
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-06-28 11:48:28 -04:00
ffa790d69d
[PATCH] Get osGetWindParam() and osSetWindParam() accessible
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-06-28 11:48:28 -04:00
882d5c82b3
[PATCH 1/2] Fixed the function names of some OSSL functions shown as
...
threat-level check error message
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-06-28 11:48:28 -04:00
e11c959400
[PATCH] Changed Wind parameters default value in OpenSim.ini.example
...
according to implementation
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-06-28 11:48:28 -04:00
36e2054760
minor: temporarily comment out the local status notify friends messages seen on login/logout, since it's a bit noisy on the console.
...
Please uncomment if/when this is still needed.
2011-06-27 23:12:54 +01:00
23bf773dea
For an initial test, add 64 bit shared object bullet libraries built under Linux. These are not yet hooked up.
...
I'm not sure which one you actually need, Robert, so please prune as appropriate. I haven't tested or hooked these up in any way yet.
2011-06-27 00:29:01 +01:00
698cd0b3c2
Remove the now unused [cms] section from OpenSimDefaults.ini
2011-06-25 01:33:09 +01:00
5daac0584a
Fix bug in reset user password where entering an invalid name would cause an exception. Also, convert this commands log output to console output.
...
Console output is more appropriate for console commands. The log only gets one side of the conversation anyway (since it doesn't necessarily record command inputs).
2011-06-25 00:08:14 +01:00
296774495b
Implement "set user level" console command to set the user level (which determines whether a user has a god account)
...
Adapted from Makopoppo's patch in http://opensimulator.org/mantis/view.php?id=5552 . Thanks!
2011-06-25 00:03:34 +01:00
56dcc51094
Add a command "show account <first-name> <last-Name>" to the user account service that will show the given user details
2011-06-24 23:54:37 +01:00
7545692f32
Changed actual default values of 'ServiceConnectorModule' and 'MessagingModule' in [Groups] section in accordance with OpenSim.ini.example descriptions
2011-06-24 22:40:21 +01:00
0dd3281caf
Optionally, don't delete previously compiled scripts on startup
2011-06-24 22:07:20 +01:00
afb1248e39
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-24 21:57:16 +01:00
1a0a9d2290
Implement the latest mesh mechanism so that rezzing the uploaded mesh now works again.
...
Many thanks to the aurora project for pioneering this.
This code is almost certainly not bug free, but it does at least appear to handle simple meshes (except when the viewer crashes - but it is beta!).
2011-06-24 21:54:01 +01:00
1cad116b1d
Merge branch 'master' of /home/opensim/src/opensim
2011-06-24 16:33:40 -04:00
75199a0d2c
RegionReady Module:
...
Add notification to neighbors when logins are enabled.
2011-06-24 16:20:13 -04:00
Justin Clark-Casey (justincc)