b16abc8166
Massive tab and trailing space cleanup
2017-01-05 19:07:37 +00:00
ab12a14279
Pushed AssemblyVersion up to VersionInfo, so that we don't need to do global replace anymore.
2016-02-21 11:14:02 -08:00
59b63b6406
On to 0.8.3!
...
Conflicts:
OpenSim/Region/PhysicsModules/ConvexDecompositionDotNet/Properties/AssemblyInfo.cs
2015-10-18 21:51:49 -07:00
cc1fc400d8
pCampbot: added behavior that mimic initial inventory download. It's not exactly what the viewer does, but it's close enough, and the elapsed time can be measured.
2015-05-07 12:37:49 -07:00
da32512ea4
Updated all occurrences of AssemblyVersion("0.8.1.*") to AssemblyVersion("0.8.2.*")
2015-04-29 18:47:17 -07:00
4b8215c893
minor: comment out unusued logging objects in some pCampbot behaviour classes
2015-01-20 00:18:25 +00:00
b53be022f2
On pCampbot, if we add the none (n) behaviour then make it actually stop any bots in motion.
...
Previously, adding this behaviour after physics (p) would leave the bot to drift off for ever in its last movement direction.
2014-11-25 23:23:09 +00:00
6ac12a42ec
Add "debug lludp packet" command to pCampbot.
...
This allows one to log the packets received by a particular bot that are not duplicates of already received packets.
Similar to the OpenSimulator command at the same name but currently any positive level logs all received packets.
No facility yet for logging outgoing packets.
For debug purposes.
2014-09-24 23:44:48 +01:00
c73b02d583
Replace two connecting bots state booleans in pCampbot with a single state machine.
...
Also adds "show status" command to pCampbot that currently just shows bot connecting state
2014-09-22 23:13:19 +01:00
ce74418c20
minor:Give console feedback when we sit or stand pCampbot bots.
...
Also only write console lines for actually connected bots.
2014-08-19 00:58:33 +01:00
3a643e2456
Don't allow the last behavior to be removed from a pCampbot bot
...
If you want to stop existing behavious, add the None behaviour.
2014-08-15 22:44:31 +01:00
1d2933ca51
Resolve a small race condition on removing bot behaviours that might leave previous behaviour active
...
Also closes behaviours on disconnect instead of interrupt, though this makes no practical difference.
If existing behaviour is None, other added behavious will not take affect until None is removed (as this is an infinite wait until interrupted).
2014-08-15 22:41:00 +01:00
21176a3a90
Terminate 'nothing' behaviour (and potentially others) by signalling using an event rather than polling connection state every 100ms
...
This kind of polling is very expensive with many bots/polling threads and appears to be the primary cause of bot falloff from the client end at higher loads.
Where inbound packet threads can't run in time due to contention and simulator disconnect timeout occurs.
2014-08-13 22:38:27 +01:00
f1f935ed95
Add 'server' stats information to pCampbot, as used elsewhere in OpenSimulator
...
This adds the "show stats", "stats record", etc. commands and information on available Threadpool threads, etc.
It also adds the Watchdog which logs warnings if time between executions is unexpectedly large.
2014-08-13 19:53:42 +01:00
f1cec684e2
For pCampbot, set max number of permitted connections to an endpoint to int.MaxValue
...
This is to avoid issues where many bots connect to a single end point with multiple regions, where each region requires a long-lived poll connection for each bot.
2014-08-12 18:46:09 +01:00
0e71e3889c
Go back to disconnecting bots in parallel since serially is too slow.
...
However, disconnecting now halts any current connection, with the possible exception of the single currently connecting bot.
2014-08-05 01:37:10 +01:00
fcc665a567
Put pCampbot "disconnect" command on separate thread like "connect" so that we can continue to run status commands whilst bots are disconnecting.
2014-08-05 01:15:07 +01:00
e57e9e95d4
Allow "show bots" pCampbot console command to quickly report status by not locking entire bot list for almost 100% of connection time.
2014-08-05 01:07:08 +01:00
46c1d4e319
pCamBot: download Meshes
...
The "Sculpt" field in prims is used for both Sculpties (where the assets are Textures), and real meshes. Meshes require a different download URL than textures.
2014-07-21 09:12:16 +01:00
470161ae2e
Write some pCampBot messages to the log
2014-07-21 09:11:51 +01:00
5450b1b024
Change assembly versions to 0.8.1
2014-06-17 18:37:15 +01:00
ca78c8326e
Eliminated 'Obsolete' warning: don't call do-nothing function SetPreviousAppearance()
2014-04-23 14:38:04 +01:00
cddf1ec0dc
Added 2 new behaviors to pCampBot
2014-02-21 10:06:08 -08:00
d27e188fe2
Added 2 new behavirors to pCampBot. These are part of a systematic study I'm doing for understanding the load that AgentUpdate packets incur on the server.
2014-02-21 10:04:12 -08:00
caf2abe311
Record individual region bot disconnects in pCampbot log
2013-11-05 23:32:26 +00:00
2d315ec207
Fix a race condition where pCampbot actions could continue even if a bot had disconnected.
2013-11-05 20:58:52 +00:00
c6395240f0
For individual bots, seed random number generator with a random number from BotManager rather than Environment.Tickcount
...
Otherwise, since bots are now created all at once, a bunch will get exactly the same tickcount and hence number sequences
2013-11-01 02:04:04 +00:00
cc7065f9ee
minor: change "bot" pCampBot help cateogry to "Bots"
2013-11-01 00:04:18 +00:00
0e07fad2e1
minor: update pCampbot usage/help statement
2013-10-31 20:19:57 +00:00
42bdf44658
Bump OPenSimulator version and assembly versions up to 0.8.0 Dev
2013-10-04 23:33:47 +01:00
b781a23c44
In pCampbot PhysicsBehaviour.Close(), only cancel jumping if bot is connected
2013-09-03 19:58:27 +01:00
9c3c9b7f5f
Make pCampbot "add behaviour" and "remove behaviour" console commands work for all bots if no bot number is given
2013-09-03 19:57:34 +01:00
76bd2e2d72
Consistently give responsibility for thread sleeping to behaviours rather than controlling from the main action loop
...
This is to avoid excessive and inconsistent delays between behaviours that currently need to embed sleeps in other actions (e.g. physics) and other behaviours.
Might need a more sophisticated approach in the long term.
2013-09-03 19:41:12 +01:00
3dbe7313d1
Add Close() method to IBehaviour to allow behaviours to cleanup when removed or bot it disconnected.
...
In this case, it is used to turn off jump when physics testing behaviour is removed.
2013-09-03 19:33:17 +01:00
1a2627031d
Add pCampbot "remove behaviour" console command for removing bot behaviours during operation.
...
Doesn't currently work very well as stopping physics, for instance, can leave bot travelling in old direction
2013-09-03 19:05:54 +01:00
9bd6271570
Add ability to adjust pCampbot bot behaviours whilst running with "add behaviour <behaviour-name> <bot-number>" console commad
2013-09-03 18:51:55 +01:00
01cb8033a4
And fix break in "show bot" from commit 9c65207
2013-09-03 17:55:20 +01:00
a89c56dcf1
Fix build break from last commit 9c65207. Mono 2.4 lacks string.join(string, List<string>), or some auto casting is missing
2013-09-03 17:53:29 +01:00
9c65207936
Show behaviours of pCampbot bots in "show bots" and "show bot" console commands
2013-09-03 17:07:57 +01:00
1a623bb266
Rename pCampbot.ini -> pCampBot.ini (and example file) to be consistent with other capitalizations of pCampBot
2013-08-23 20:58:46 +01:00
050617ae0e
Make pCampbot "show bot" command take the bot number instead of the full bot name
...
Shorter and can do this because bot names are uniform
2013-08-23 01:13:19 +01:00
13556cf129
Fix a further bug in pCampbot connect where ignoring already connected bots was wrongly counted as a connect
...
Also, only sleep when we actually perform a connection
2013-08-22 23:49:19 +01:00
70f89ae65b
Make it possible to adjust the pCampbot login delay via the [BotManager] LoginDelay parameter of pCampbot.ini
2013-08-22 23:43:33 +01:00
51c7fb1969
Add "set bots" command to make it possible to set SEND_AGENT_UPDATES on all bots whilst pCampbot is running
2013-08-22 23:11:05 +01:00
66a7dc3a0d
In pCampbot, don't try and reconnect bots that are already connected on console "connect" command
2013-08-22 20:12:14 +01:00
4a81465b91
Fix build break from last commit a3e1b27 on mono 2.4.3
...
Looks like this level of mono doesn't have a string.Join() which will take a list rather than an array (or some implicit conversion isn't happening)
2013-08-20 18:47:52 +01:00
a3e1b278a1
Add pCampbot "show bot" console command to show more detailed information on a particular bot (e.g. what sims they are connected to)
2013-08-20 18:41:09 +01:00
56d1d67a34
Add pCampbot console commands to sit all bots on ground and stand all bots
2013-08-20 17:01:12 +01:00
a3dd7db4a3
Add -connect (-c) switch to pCampbot command line options.
...
Now, bots will only connect at startup if this switch is specified.
If it is not specified, then a separate "connect" command is required on the pCampbot command line
2013-08-20 00:08:47 +01:00
589b1a2eaf
Make it possible to reconnect pCampbots with the console command "connect [<n>]".
...
If no n is given then all available bots are connected
2013-08-19 23:50:18 +01:00
Melanie Thielker