This controls how many undo steps the simulator will store for each prim.
Default is now 20 rather than 5 as it briefly was.
The default number could be increased through this is a memory tradeoff which will scale with the number of prims in the sim and level of activity.
This resends appearance uuids to avatars in the scene once a minute.
I have seen this help in the past resolve grey appearance problems where viewers have for unknown reasons sometimes ignored the packet.
The overhead is very small since only the UUIDs are sent - the viewer then requests the texture only if it does not have it cached.
This setting will not help with cloudy avatars which are usually due to the viewer not uploading baked texture data or uploading something that isn't valid JPEG2000
This is because libopenjpeg 1.5 appears to require a minimum of glibc 2.14, whereas at least one fairly recent distro (openSUSE 11.4 from 2011-03-10) only has glibc
Further investigation pending.
Among other things this allows pCampbot to work under Windows since libopenmateverse now ships the same log4net.dll (publicly signed) as OpenSimulator
This also updates the libopenmetaverse embedded libopenjpeg from 1.3 to 1.5.
DLL naming and mapping for non-Windows libopenjpeg changes to remove version number to make future udpates easier and bring it into line with names of other shipped DLLs.
libopenjpeg updates have been made for OSX, Windows (32 and 64 bit) and Linux (32 and 64 bit). Please report any issues.
Fix inconsistencies between configuration parameter names and their description names. Changing the configuration parameters for non physical prim size min-max from Nonphys* to NonPhys*.
Please update your OpenSim.ini and Regions.ini to reflect these changes.
This is to resolve a problem where an asset marked as local but not temporary but still used in the scene would be removed.
The timed expiry scan no longer tries to refetch assets from the scene that are not currently in the cache - this is not helpful since it just drags a lot of data into the cache that may never be referenced.
This removes the DeepScanBeforePurge option since setting this to false will introduce the above problem. This previously had a default of true.
Viewer LL 3.3.4 and before sometimes fail to properly redisplay dynamic textures that have a small data length compared to pixel size when pulled from cache.
This appears to happen when the data length is smaller than the estimate discard level 2 size the viewer uses when making this GetTexture request.
This commit works around this by always regenerating dynamic textures that fall below this threshold rather than reusing them if ReuseDynamicTextures = true
This can be controlled by the [Textures] ReuseDynamicLowDataTextures config setting which defaults to false.
If true, this setting reuses dynamically generated textures (i.e. created through osSetDynamicTextureData() and similar OSSL functions) where possible rather than always regenerating them.
This results in much quicker updates viewer-side but may bloat the asset cache (though this is fixable).
Also, sometimes issue have been seen where dynamic textures do not transfer to the viewer properly (permanently blurry).
If this happens and that flag is set then they are not regenerated, the viewer has to clear cache or wait for 24 hours before all cached uuids are invalidated.
CUrrently experimental. Default is false, as before.
This is necessary because commit 8131a24 (Tue Mar 27 10:08:13 2012) started passing the config section name rather than hardcoding "AssetService"
This meant that the HG external-facing asset service tried to read ConnectionString from [HGAssetService] rather than [AssetService].
On SQLite, not finding this meant that it fell back to [DatabaseService], which is set for OpenSim.db rather than Asset.db.
Therefore, all external asset requests returned null.
Solution taken here is to create an [HGAssetService] section with the same ConnectionString as [AssetService].
This bug does not affect normal MySQL/MSSQL config since they use the [DatabaseService] connection string anyway.
Addresses http://opensimulator.org/mantis/view.php?id=6200, many thanks to DanBanner for identifying the exact problem commit which was very helpful.
This was a regression from OpenSimulator 0.7.3.1 which did not contain this bug.
This also fixes computation of avatar mass.
Added parameter MaxPersistantManifoldPoolSize.
Fixed a parameter setting bug which caused crashes of there were
more than 400 or so physical objects. I tested up to 5000.
Updated BulletSim DLLs and SOs.
Add description and default of false (as before) to OpenSimDefaults.ini
If set to true, this config switch will resend avatar appearance information (a small amount of UUID data, not the baked textures themselves) to other avatars in the sim every 60 seconds.
For me, this has helped with situations where avatars appear persistently grey - the LL viewer sometimes did not appear to request assets the first time the appearance data was sent.
However, this switch will not help with other appearance failure situations (e.g. failure to bake assets).
This setting is experimental but will not have any significant impact on the simulator if turned to true.
This is to try and resolve a strange Initialization exception for the AppearanceManager type that only occurs on Windows 64 bit (not Windows 32 bit or Linux!)
Built from https://github.com/openmetaversefoundation/libopenmetaverse/commits/master
This update incorporates a fix by Melanie in libomv where textures would sometimes rotate slightly when other properties were changed.
Hence addresses http://opensimulator.org/mantis/view.php?id=6100
This update also incorporates libomv bot code updates that significantly reduce the warning spam for pCampbot.
The change rate of libomv is low and many changes refer to bot or code not used by OpenSimulator, so I think it is sufficiently stable to use evne though it's not a release.
and into its own class. The BulletSim data structures track
individual prims as linksets of 1 so most of the prim code is not
different between a linked and unlinked object.
Only files ending in .ini and .xml are actually loaded.
Also improves the help at the top of Regions.ini.example to mention that OpenSimulator would generate Regions.ini anyway on first startup.
Also changes separator from comma to bar to match existing [LoginService] config features.
Divergence of config names for identical facilities in different places makes for an unnecessarily confusing user experience.
This is to provide an indication of what's happening now that the default isn't to report every single script start.
Changes XEngine logging level in OpenSim.exe.config from WARN to INFO.
This is to reduce log spam from script loading, which is especially spammy for avatar movements with scripted attachments.
All important messages are at warn or above.
If you still want/need to see these messages, set <level value="DEBUG"/> in the <logger name="OpenSim.Region.ScriptEngine.XEngine"> section of OpenSim.exe.config.
This affects no other package logs, which still output at the root configured level (currently DEBUG by default).
The packet was actually being handled but not acted on.
This change extends the default timeout for paused clients to 5 minutes
and makes both the paused and non-paused timeout periods configurable.
If active, the physics module can return arbitrary stat counters that can be seen via the MonitoringModule
(http://opensimulator.org/wiki/Monitoring_Module)
This is only active in OdeScene if collect_stats = true in [ODEPhysicsSettings].
This patch allows OdeScene to collect elapsed time information for calls to the ODE native collision methods to assess what proportion of time this takes compared to total physics processing.
This data is returned as ODENativeCollisionFrameMS in the monitoring module, updated every 3 seconds.
The performance effect of collecting stats is probably extremely minor, dwarfed by the rest of the physics code.
Without this, LL 3.3.1 continually pushes LLInventoryModelFetchDescendentsResponder::error 499 to its log.
This cap will be ignored by older viewers - UDP inventory will work normally.
This is because the viewer doesn't receive a timezone from the server but bases its displays on Pacific Standard Time.
However, it still expects to receive notification from the server as to whether or not Daylight Savings Time for PST is in operation.
This commit introduces a new DSTZone setting in the [LoginService] config setting that accepts a list of timezone names valid across different platforms to calculate Pacific DST.
If you need the old behaviour of calculating DST based on the local timezone of the server running the login service, then please override DSTZone with "local".
A mailing list announcement will be made later.
Thanks to Olivier Van Helden and Gudule Lapointe for determining this behaviour and providing this patch.
From http://opensimulator.org/mantis/view.php?id=5972
Diva Canto