e3308c0fa5
Mantis#2084. Thank you kindly, HomerHorwitz for a patch that:
...
Addresses the problem of ghost avatars. The problem was child-agents
sending data. Due to symmetry reasons, I considered that wrong.
Whenever an avatar A1 in region R1 looks at avatar A2 in adjacent
region R2, we have two possibilities to communicate: A2-root sends
to A1-child (both in region R2), or A2-child sends to A1-root
(both in region R1). Currently, the children send data in some cases,
and I guess the viewer gets puzzled about that and switches the child
to root as consequence (at least partly), so it becomes visible.
2008-08-30 01:21:18 +00:00
fda5457996
Maintis #2078
...
Thank you, ralphos, for a patch that corrects the handling of compiler
warnings in the XEngine, which were erronoeously reported as errors!
2008-08-29 19:57:01 +00:00
9fc67f1908
Mantis#2067. Thank you kindly, HomerHorwitz for a patch that:
...
Found that during my ghost-hunt: Add some logging and you see that the
counting down happens twice (once at the place that is removed by the
patch, and once caused by the actual removal of the root-/child-agent
during LLClientView.Close). With the patch applied, I end up with correct
numbers, i.e. with 0 roots and 0 children after everyone has logged out.
2008-08-29 14:21:31 +00:00
ee0a5caa30
Fix an issue where the client supplies an empty name and it was applied
...
to the inventory item, causing the item to wind up without a name.
2008-08-29 11:03:58 +00:00
35ad484b6b
fixed some ugliness in the conversion from the new mesher format to the old that should speed up region startup a little and maybe even use less memory if the GC decides to play friendly with the other kids.
2008-08-29 08:19:47 +00:00
10b2a4597a
Mantis #1903
...
Thank you, cmickeyb, for a patch that fixes inventory folder retrieval.
2008-08-28 20:56:53 +00:00
bd525d4da0
commented out the SurfaceInfoBlock read code in libsecondlife packet.cs
2008-08-28 16:06:55 +00:00
571f296fe1
another attempt to fix the surfaceInfoBlock issue
2008-08-28 15:44:57 +00:00
8d3fc87303
change the size limit on TranferPacket in libsl from 1100 back to 1500 (which is was in old libsl)
2008-08-28 15:16:52 +00:00
d220d9e24b
Doh! fixed silly mistakes in last commit
2008-08-28 14:54:08 +00:00
f6614c10bf
attempt to fix problem with missing surfaceInfoBlocks in the objectgrab packets sent by < 1.21 clients.
2008-08-28 14:46:25 +00:00
3bf8858727
Update svn properties, formatting cleanup.
2008-08-28 14:41:54 +00:00
086284da55
Thannk you, Ralphos, for a patch the corrects an improper cast in
...
llSetPrimitiveParams
2008-08-28 14:08:09 +00:00
605ceb6176
Fix for Bug #2065 : New check out crashes on sqlite migration
...
I apparently missed one drop tables statement that was actually needed
when I did the cleaning to make this work for old sqlite versions.
2008-08-28 12:47:55 +00:00
0c7a53d7c4
updated our libsl, _packet_.cs to the current version from openmv
...
Update with a bit of caution as not fully tested yet.
2008-08-28 12:39:06 +00:00
5dac6242bd
Thank you, salahzar, for a patch that adds some more functions
...
from DotNetEngine into XEngine.
2008-08-28 10:42:22 +00:00
1828091528
create-region didn't know about regionload_regionsdir...
2008-08-28 10:01:56 +00:00
0921dafddf
adds XmlRcpLoadOAR support to RemoteAdminPlugin.cs
2008-08-28 09:34:47 +00:00
47127abfb6
* Added hack so that if the default OpenSimulator ParentEstateId(100) is being sent through rez_avatar, it'll be swapped out with 1. This ensures that when the map recognizes the parent estate id parameter on the linden grid, it'll work as expected. This also has the effect of making it impossible to send a Parent Estate ID with 100 over OGP from OpenSimulator (Sorry Owner of estate 100).
2008-08-28 08:25:47 +00:00
88b3df9d52
* OGP update, deserialize the parameter array properly in rez_avatar
...
* Tweak rez_avatar data so it's easier to update when OGPr3 comes out
2008-08-28 08:13:35 +00:00
4a3523bc67
this fixes the crash reported by mantis #2046 : user server crashing if
...
no OpenSim.ini file found by GridInfoService. GridInfoService now will
just issue a warning that GridInfo will NOT be available to your users
if no OpenSim.ini file is available. due to the static nature of
UserConfig (configuration options hardcoded) i don't think it's currently
an option to move GridInfo into user_server.xml but if anyone wants to
look into this i'd be delighted...
2008-08-28 07:37:16 +00:00
49f9bd8b68
Added some exceptions for bad profile cut parameters
2008-08-28 06:41:32 +00:00
53f78a1087
Thank you, A_Biondi, for patch to porperly apply the new item name
...
when copying within agent inventory
2008-08-28 02:36:40 +00:00
bf4d1fbb8d
Refactor IScriptInstance / IScriptEngine to use a generic IScriptWorkItem,
...
which is a thin wrapper around a IWorkItemResult from the SmartThreadPool.
However, it is very easy to reimplement on top of basic threading and therefore
makes the IScriptInstance class independent of the specific threading
implementation.
2008-08-28 00:37:22 +00:00
82aa9ba2b5
Remove self-referential build dependency that breaks build under
...
Windows
2008-08-27 23:55:46 +00:00
1a83384f90
re-enable new PrimMesher module for mesh creation for standard (non-flexy) prims.
2008-08-27 23:43:53 +00:00
2c842652c1
ODEPlugin now frees source mesh data after conversion to pinned lists to save memory
2008-08-27 23:39:50 +00:00
e593a333c7
adds releaseSourceMeshData() method to IMesh and Mesh for freeing mesh data after conversion to pinned lists.
2008-08-27 23:37:14 +00:00
5525a3ecb4
Thank you, salahazar, for a patch that corrects the behavior of
...
llDetectedLink(). Also a small refactor to remove an interface member
from IScriptEngine.
2008-08-27 22:53:58 +00:00
6e3367d68c
Refactor XScriptInstance to IScriptInstance and move into Shared/. Now
...
engines that want to use the XEngine's instance handling and state
persistence can do so. IScriptInstance is optional, but it does
require the SmartThreadPool if it is used.
2008-08-27 22:38:36 +00:00
a2985b5655
Refactor Executor into the script app domain and IScript. This changes
...
an implicit reference into a proxied one and further reduces memory
consumption of XEngine
2008-08-27 21:36:03 +00:00
f900553b58
* Updates OGP module to define a default starting point
...
* An attempt to solve an intermittan SSL Certificate validation error causing communications havok.
2008-08-27 20:27:18 +00:00
3465a5772a
cleaning out cruft from pre-Migration days
2008-08-27 19:24:48 +00:00
066715415a
getting rid of pre-Migration cruft
2008-08-27 19:24:46 +00:00
c75f1fcde8
we are now past change 6000, so getting rid of pre-Migration cruft
2008-08-27 19:24:45 +00:00
b625a36ae5
we are now past change 6000, so getting rid of the pre-Migration
...
upgrade cruft
2008-08-27 19:24:40 +00:00
1a3f83c94b
Erm - make the distanc factor really work....
...
(wipes egg off face)
2008-08-27 19:12:17 +00:00
bc78a6335b
Mantis #2058
...
Remove the physics representation of link set child prims when the
link set is deleted.
2008-08-27 19:06:07 +00:00
fc81ddc1d1
From: Richard Alimi <ralimi@us.ibm.com>
...
The following patch fixes the import of assets via the REST interface to
use the proper Base64->Bytes conversion. The previous conversion did not
work correctly for binary data, in particular for textures.
2008-08-27 18:59:42 +00:00
5bf5e1c320
remove legacy pre-Migration database upgrade routines
2008-08-27 18:51:43 +00:00
49df787665
remove the legacy pre-Migration database upgrade paths
2008-08-27 18:51:42 +00:00
ba16a27ab0
remove pre-Migration upgrade paths
2008-08-27 18:51:40 +00:00
53afa23608
we're past checkin 6000, so now cleaning up all the cruft of the pre
...
migration database upgrade paths. This is coming in in stages.
2008-08-27 18:51:36 +00:00
a12f652347
Make the check on inventory cache clearing more robust. Addresses
...
Mantis #1975 in a broader way. This may or may not prop up
secure inventory a bit better, but I still recommend to disable it
2008-08-27 17:50:07 +00:00
f87f8b3b9f
get rid of the "drop if exists" lines in this old migration, as those
...
tables shouldn't exist yet, and the exists keyword is relatively new in
sqlite. This has been breaking a lot of people on Suse Enterprise Linux,
for instance.
2008-08-27 17:32:02 +00:00
788dff7090
Implements the r6005 foes for XEngine as well
2008-08-27 17:19:56 +00:00
1ac6bb3107
Add ScriptDistanceLimitFactor to OpenSim.ini to allow modifcation of
...
LSL's arbitrary 10 m limit on object movement.
Also implements the 10 m maximum rezzing distance, subhect to the same
factor.
2008-08-27 17:12:55 +00:00
36d1720fde
reverting to prior meshing methods until some physics timing issues can be resolved
2008-08-27 09:49:13 +00:00
65c82c2494
Added some exception trapping to PrimMesher
2008-08-27 08:03:52 +00:00
cf951d4d04
Added some exception handling to help catch some possibly corrupt prims
2008-08-27 07:30:14 +00:00
Charles Krinke