As suggested by Orenh in mantis 7644, in the future it would be beneficial and less confusing to use only 1 of the 3 current config loaders.
Signed-off-by: Oren Hurvitz <orenh@kitely.com>
they were moved. At the moment, ossl settings are in the XEngine section although
they should apply to any LSLish script engine. Moves all ossl settings to osslEnable.ini
Update osslEnable.ini with more decriptive comments and set some functions to be more
restrictive -- especially the functions that allow scripts to do things to other
avatars and prims.
Per comments, putting new configuration files in bin/ is not preferred.
Add comments and instructions to heading of osslEnable.ini.
Add a commented out include of osslEnable.ini to OpenSim.ini.example.
Fix line endings of osslEnable.ini to be Unix style.
An 'include' in OpenSim.ini would enable the ossl functions but, for the moment,
the functions are still disabled by default and this file is an example
of what could be done.
This is necessary because both asset and inventory reuse generic connectors that will otherwise set up authentication configured in the [Network] section.
This allows one to set up authentication for private services whilst still being able to use asset and inventory on foreign grids.
The setting is AuthType = None in both [HGAssetService] and [HGInventoryService]
Private grid asset and inventory services will still set up the authentication as configured.
This is to address an issue where HTTP script functions could make calls to localhost and other endpoints inside the simulator's LAN.
By default, calls to all private addresses are now blocked as per http://en.wikipedia.org/wiki/Reserved_IP_addresses
If you require exceptions to this, configure [Network] OutboundDisallowForUserScriptsExcept in OpenSim.ini
closer to SL. This change should address small floor edges acting like
walls, approaching a step at any angle (other than walking backwards)
will allow walking up, and reducing the avatar pop-up when going up
stairs.
Note that I also made things consistent by removing both the EstateDataService and the SimulationService into their own dlls, just like all other services. They really didn't belong in Services.Connectors, since everything in that component is about network connectors to robust backends. We may have too many dlls, and at some point it might not be a bad idea to merge all services into one single dll, since they all have more or less the same dependencies.
This cleans up Opensim's use of mono addins. In particular, the extension points /OpenSim/RegionModules and /OpenSim/WindModule moved from OpenSim.exe to OpenSim.Region.Framework.dll. From here on, developers of region modules should declare their dlls to be dependent on OpenSim.Region.Framework, starting with version 0.8.1
Additional changes:
- Addins version uniformly updated to 0.8.1. These numbers should be compatible with the release numbers or else it becomes very confusing.
- Mono addins directives moved from files addins.xml to embedded directives in the class and assembly declarations, to make it all consistent
throttles. Setting adaptive_throttle_min_bps will change the
minimum rate that the adapative throttles will drop to in case
of network packet loss. The current rate default rate is 256kbps.
The viewer can throttle rates under that amount, but the dynamic
adaptation will not.
If log level is 1 then every script load is logged.
This means the <logger name="OpenSim.Region.ScriptEngine.XEngine"> section in OpenSim.exe.config is no longer needed to avoid log spam on regions with many scripts and can be removed.
This is implemented with a new collision type (PhantomToOthersAvatar) to potentially allow colliding and non-colliding avatars to be present in the same scene.
So there is no provision yet for giving avatars different collision types.
This commit replaces the temporary change in commit f3eaa6d8 where avatars would never collide when using BulletSim
This is equivalent to the av_av_collisions_off option in ODE.
This resolves an issue with pCampbot where some bots would occasionally connect with the same UDP source port.
This sometimes led to console messages where bots would report receiving packets multiple times that weren't marked as resends.
DLLs built under windows
This shows summary wearables information (shape, hair, etc.) for all avatars in the scene or specific information about a given avatar's wearables.
Similar to the existing "attachments show" command.
This is the same as already done for scene_throttle_max_bps
Internally, the token buckets are in bytes and the other help text makes it clear that the number is bytes per second
(though with the wrong assumption that 1 mbit = 1024 * 1024 bits whereas 1 mbit = 1000 kbits = 1000000 bits)
This resolves an issue with pCampbot where some bots would occasionally connect with the same UDP source port.
This sometimes led to console messages where bots would report receiving packets multiple times that weren't marked as resends.
DLLs built under windows
This setting was originally added some time ago to deal with issues where appearance was not received properly by all users.
However, it does not scale well with large numbers of agents.
Disabling to see if the original problem has abated or whether this will have to be tackled in another way.
[Startup] default setting UpdateTempCleaningEveryNFrames becomes UpdateTempCleaningEveryNSeconds.
Default becomes 180s instead of effective 182s (which would also vary with any changes in frame time or extra long frames)
If n > 1 for RootTerseUpdatePeriod only every n terse update is actually sent to observers on same region, unless velocity is effectively zero (to stop av drift).
If n > 1 for ChildTerseUpdatePeriod only every n terse update is sent to observers in other regions, unless velocity is effectively zero.
Defaults are same as before (all packets are sent).
Tradeoff is reduction of UDP traffic vs fidelity of observed av mvmt.
Increasing n > 1 leads to jerky observed mvmt immediateley for root, though not on child, where experimentally have gone to n = 4 before jerkiness is noticeable.
This adds the "show stats", "stats record", etc. commands and information on available Threadpool threads, etc.
It also adds the Watchdog which logs warnings if time between executions is unexpectedly large.
Experimentally, on the Linden Lab grid the avatar can rotate slightly before triggering AvatarUpdates, whereas this is practically impossible in OpenSimulator.
These updates allow other avatars to see rotations, though sensitivity is low since other avatars can only be seen in one of 8 body rotations.
This commit changes sensitivity from 0.01 to 0.1, which better matches LL and reduces UDP traffic which has a beneficial impact on network and CPU load.
This has no impact on rotations in the simulator itself so simulation fidelity is the same as before.
To change this setting back for test/other purposes, edit RootRotationUpdateTolerance in the [InterestManagement] section of OpenSim.ini
Running out of such threads under heavy load causes delayed packet processing which can lead to spurious UDP resends and knock on issues.
We already massively boost the min/max builtin pool worker and IOCP threads (which even with STP are still used for inbound network requests) without obvious adverse effects.
The threads are only instantiated if they are required.
This change does not affect other async_call_method options.
Move the experimental extra features functionality into the GridService. This sends default values for map, search and destination guide, plus ExportSupported control to the region on startup. Please watch http://opensimulator.org/wiki/SimulatorFeatures_Extras for changes and documentation.
These govern when AgentUpdates are sent to observers on position, rotation and velocity changes to an avatar (including the avatar themselves).
Higher values reduce AgentUpdate traffic but at a certain level will degrade smoothness of avatar and perceived avatar movement.
This, by default, enables terrain patches being sent to each avatar
from the avatar away (rather than the old outside-in pattern), only
sending terrain patches within the avatars view distance (making
view loading quicker), and sending multiple terrain patches per
protocol packet (making terrain loading and editing quicker).
co-op should be more stable as it doesn't abort threads, which can trigger virtual machine instability
This change will be invisible to users as script DLLs are recompiled automatically where necessary, though the change won't take affect until the next simulator restart.
This change has no effect on existing script state.
If you want to continue using abort, set ScriptStopStrategy = abort in the [XEngine] section of OpenSim.ini
This is to fix an issue since recent commit fbcb763 where these are no longer removed automatically.
OpenSim.*.config was already not appending these newlines
This is to allow us to get useful information on messaging without being overwhelmed by the rest of groups debug.
Enabled with [Groups] DebugMessagingEnabled = true in config (default false)
Or "debug groups messaging verbose true|false on the console" (similar to existing groups setting).
Done for both xmlrpc and V2 groups.
AliciaRaven