227d2e2b61
Avoid a possible race condition where the XEngine script compile thread could complete but see OnRezScript() insert a new job and complete before it set m_CurrentCompile = null
...
If the above happened, it would mean the new script would not compile until some script was added for compilation.
2014-12-10 00:04:10 +00:00
76722d8324
In XEngine, enqueue a script rez to the compile queue after setting m_CompileDict to avoid a rare but not impossible race condition.
2014-12-09 23:59:19 +00:00
f3ab7c0f5c
refactor: rename IteratingUuidGather.AddAssetUuidToInspect() and RecordAssetUuids() to AddForInspection() as this properly describes what both of these methods do.
2014-12-05 00:21:42 +00:00
b0ff3236be
Make "fache assets" console command more efficient by only updating access times on each cached asset once, not for every reference.
2014-12-05 00:09:01 +00:00
9208fb5d54
refactor: Make IteratingUUIDGatherer take a dictionary in its constructor like UUIDGatherer, so we can deal with future cases where the dictionary may already be pre-populated.
2014-12-04 23:55:59 +00:00
bee3f203cd
Allow scripts in attachments on an owned NPC to call NPC functions on that NPC
2014-12-04 22:52:46 +00:00
9dbe99af0f
If "fcache assets" is executed, don't stop with an exception if there's an access violation if another thread is operating on the file at the same time.
...
Resolves one issue from http://opensimulator.org/mantis/view.php?id=7271
2014-12-04 01:53:42 +00:00
ad91143880
refactor: breakout flotasm cache last file access time to separate UpdateFileLastAccessTime() method for imminent reuse.
2014-12-04 01:51:01 +00:00
c36bfdc60f
Don't worry about checking FlotsamAssetCache.m_CurrentlyWriting when updating access time.
...
The majority of updates won't be for anything currently writing and any sharing exception from an actual clash can be caught and ignored anyway.
2014-12-04 01:46:00 +00:00
5861401faa
Remove long unused region parameters from SceneBase. Some of these weren't even being set. Region parameters come from Scene.RegionInfo instead.
2014-12-03 21:44:22 +00:00
2d2aa6e076
minor: Just have one message that displays successful registration of a region with its parameters rather than 2
2014-12-03 21:40:39 +00:00
d34ad345d5
minor: If we are recompiling scripts in response to a ScriptStopStrategy config change (a rare situation), then explicitly log this for debug purposes.
2014-12-03 21:08:43 +00:00
c3c05a8693
Reintroduce general xengine extra debugging log level. This can be controlled at runtime with the command "debug xengine log <level>", as with similar commands.
...
If log level is 1 then every script load is logged.
This means the <logger name="OpenSim.Region.ScriptEngine.XEngine"> section in OpenSim.exe.config is no longer needed to avoid log spam on regions with many scripts and can be removed.
2014-12-03 20:48:17 +00:00
805b7ccb3e
minor: improve logged error in XEngine.SetXmlState if there was a problem writing the linemap.
...
The previous error report of already exists is inaccurate since existing files do get overwritten.
2014-12-03 20:35:49 +00:00
72d1d96c5c
Always close script linemap file after reading and always dispose of other streams in the script engine even if exceptions are thrown.
2014-12-03 20:31:09 +00:00
3642198838
BulletSim: move detail log of InternalScheduleRebuild to reduce log file spam
2014-11-30 19:53:00 -08:00
63d192f011
BulletSim: Remove linkset 'Incomplete' flag as its meaning couldn't be made clear. Add 'InternalScheduleRebuild() CHange rebuild code to call InternalScheduleRebuild() rather than ForceRebuild() to limit the scope of the changes made by the linkset.
2014-11-30 19:53:00 -08:00
41a943bfd0
BulletSim: add BSLinkset.AllPartsComplete that checks of all linkset members are not Incomplete and not waiting for assets. Change BSPrimLinkable to use AllPartsComplete.
2014-11-30 19:52:59 -08:00
eef954a214
BulletSim: Make BSPrimLinkable 'incomplete' if any of its children are waiting for assets to load.
2014-11-30 19:52:59 -08:00
cf85ade81e
BulletSim: add shape and linkset rebuild scheduled flags. Add BSPrim.Incomplete flag based on rebuild flags to say when an object is being rebuilt.
2014-11-30 19:52:58 -08:00
432f0e8783
Correct 690fe0c to actually log the exception reported in DoOnRezScriptQueue()(and now the scene name).
2014-11-29 15:04:16 +00:00
690fe0c5e5
If there are any exceptions in XEngine.DoOnRezScriptQueue() then log the error and always set m_CurrentCompile = null
...
Setting m_CurrentCompile = null in the finally block reduces the risk that an exception could permanently stop any future scripts compiling until the simulator is restarted.
If an exception is seen from this then please report and further changes to fix the bug or improve compiling reliability can be made.
2014-11-29 01:42:52 +00:00
55e064baf7
Remove minor race condition where two threads could race on fields such as m_ScriptFailCount as set in XEngine.DoOnRezScriptQueue()
2014-11-29 01:33:14 +00:00
79e37e5ecc
Restore zero'ing RawVelocity in BSCharacter.ZeroMotion() in favour of not calling ZeroMotion in SetPhysicalProperties() at all
...
SetPhysicalProperties is only called when adding a new character so it looks like there is no existing data to reset anyway.
2014-11-29 01:13:48 +00:00
dfab60a7fd
minor: Remove a few indenting problems introduced to recent 265fe349 and convert the m_log.DebugFormat() call back to the original DetailLog call
2014-11-29 00:53:13 +00:00
dcc36507f3
Halve the prediction lag for region crossing to improve most flying region crossings without degrading the walk cross experience (neither of which have been that great anyway).
2014-11-29 00:48:26 +00:00
39eab72d7c
When performing region cross, don't add the velocity to the new position in ETM.CrossAgentIntoNewRegionMain() since this has already been performed by SP.CheckForBorderCrossing()
2014-11-29 00:16:23 +00:00
265fe349e0
Somewhat improve avatar region crossings by properly preserving velocity when avatar enters the new region.
...
This commit addresses the following issues were causing velocity to be set to 0 on the new region, disrupting flight in particular
* Full avatar updates contained no velocity information, which does appear to have some effect in testing.
* BulletSim was always setting the velocity to 0 for the new BSCharacter. Now, physics engines take a velocity parameter when setting up characters so we can avoid this.
This patch applies to both Bullet and ODE.
2014-11-29 00:12:11 +00:00
09534f378e
Avoid repeated lag-generating continuous attempts to retrieve HG service Urls in UMM if the initial request fails, possibly due to the home URL not being present
...
Instead, the failure information is effectively added to the memory cache (so no persistence over simualtor sessions).
A future improvement may be to invalidate negative cache results after some time has passed in case the failure was transient.
Looks to resolve http://opensimulator.org/mantis/view.php?id=7382
2014-11-28 01:16:30 +00:00
d9f7aa41c1
Remove unmaintained MSSQL support.
...
This has not been maintained for more than 2 years, is unimplemented for newer features (e.g. built-in groups) and has no core developers using it.
If somebody fixes these issues then it could be reinstated.
2014-11-28 00:27:13 +00:00
73234e2098
Stop writing SizeZ config parameter for now when creating regions from console as it is unused/ignored, at least in core.
2014-11-28 00:04:10 +00:00
ee9fae23ff
Be more explicit again in UMM bad HomeURL message by logging the original creator data
2014-11-27 00:32:04 +00:00
8a27fc5d61
Make UMM.AddUser(UUID, string) log message when bad creatorData is given to reflect its location (UMM not Scene) and add the user name and ID.
2014-11-27 00:24:17 +00:00
62b778ca4d
Merge branch 'master' of /team/src/opensim
2014-11-25 19:27:28 -05:00
a76aec8467
Fix whitespace hoping to avoid a flogging
2014-11-25 19:27:15 -05:00
86367d7219
refactor: Move methods to start a monitored thread, start work in its own thread and run work in the jobengine from Watchdog to a WorkManager class.
...
This is to achieve a clean separation of concerns - the watchdog is an inappropriate place for work management.
Also adds a WorkManager.RunInThreadPool() class which feeds through to Util.FireAndForget.
Also switches around the name and obj arguments to the new RunInThread() and RunJob() methods so that the callback obj comes after the callback as seen in the SDK and elsewhere
2014-11-25 23:56:32 +00:00
20cede12a9
Fix ghosts copy of SimulatorFeatureModule to enable logging.
2014-11-25 23:28:38 +00:00
66b1c37973
Fix bug in HG attachment throttling code where attachments were never rezzed on any teleport within a foreign grid after the first.
...
Bug was introduced in ghosts branch commit 69abade
2014-11-25 23:23:12 +00:00
4b45a1b6ad
Change jobengine logging command to "debug jobengine log <int>" rather than loglevel, in common with similar commands.
2014-11-25 23:23:11 +00:00
b1fd0d35e5
Make small adjustment to JobEngine default from previous commit to enable it when [Startup] section is not present (though this is extremely unlikely).
2014-11-25 23:23:11 +00:00
59b38f842a
Add [Startup] JobEngineEnabled setting that allows the job engine to be disabled for testing purposes if necessary.
2014-11-25 23:23:11 +00:00
28d1dbfee4
Move conditionals which control whether a task is placed in the JobEngine inside Watchdog.RunJob() (renamed from RunWhenPossible) and generalize them.
2014-11-25 23:23:11 +00:00
124be38f74
Add [BulletSim] option AvatarToAvatarCollisionsByDefault to control whether avatars collide. This is true by default.
...
This is implemented with a new collision type (PhantomToOthersAvatar) to potentially allow colliding and non-colliding avatars to be present in the same scene.
So there is no provision yet for giving avatars different collision types.
This commit replaces the temporary change in commit f3eaa6d8
2014-11-25 23:23:11 +00:00
3a296a817b
Fix compile error from previous 1d56029848
2014-11-25 23:23:11 +00:00
550cf714bc
Fix issue where llRemoteLoadScriptPin() would treat 0 (the default) as a valid set pin in a destination prim rather than the unset no pin state
...
Adds regression test for this case.
2014-11-25 23:23:11 +00:00
aeae34505f
When processing incoming attachments via HG, if a request for uuid gathering or final asset import takes too long remove remaining requests from same user to prevent hold up of other user's incoming attachments.
...
This improves upon the earlier naive simply queueing immplementation.
Threshold is 30 seconds. If this happens to a user they can relog and fetch will be reattempted.
2014-11-25 23:23:11 +00:00
06a5d6e9ef
Introduce an IteratingUuidGatherer where each fetch from the asset service (iteration) can be controlled by the caller.
...
This is to enable an imminent change where incoming HG scene object fetching can assess the time taken by each request rather than being forced to perform all requests in one call.
Soon, this will replace the existing UuidGatherer since it is both simpler and more flexible.
2014-11-25 23:23:11 +00:00
d6c9705a3b
Add incoming packet async handling engine to queue some inbound udp async requests.
...
This is to reduce the potential for overload of the threadpool if there are many simultaneous requets in high concurrency situations.
Currently only applied to AvatarProperties and GenericMessage requests.
2014-11-25 23:23:11 +00:00
1c5c6af274
Add missing class from recent commit 69abade
2014-11-25 23:23:10 +00:00
f54c70741b
Add "show threadpool calls active" console debug command.
...
This shows named threadpool calls (excluding timer and network calls) that are currently queued or running.
Also shows total of labelled and any anonymous calls.
2014-11-25 23:23:10 +00:00
1d19e1bbd0
Add naive implementation of controlled incoming HG attachments to manage load.
...
Instead of processing all incoming attachment scene object concurrently, process them consecutively to eliminate potential overload from this source.
This is a naive implementation because it does not currently account for slow foreign asset services.
Although it may take longer, this approach may also improve attachment visibility for HG avatars
since the scene object is now always added to the scene after receiving assets from the foreign service and not before.
2014-11-25 23:23:10 +00:00
ec8d21c434
Label all threadpool calls being made in core OpenSimulator. This is to add problem diagnosis.
...
"show threadpool calls" now also returns named (labelled), anonymous (unlabelled) and total call stats.
2014-11-25 23:23:10 +00:00
72cb1cc7d6
Add "show threadpool calls" command to show count of all labelled smartthreadpool calls
2014-11-25 23:23:10 +00:00
8c9f82b035
Just for now, don't alert the user or log if we couldn't change their server-side preferences due to no e-mail address being sent.
...
This is to avoid user confusion in the oscc rehearsal as they are often not aware that this fails because no e-mail is set.
Also may be failing in the hypergrid case, though this may also be a config issue.
This is meant as a temporary solution.
2014-11-25 23:23:10 +00:00
5d5ea9234f
Stop Mono 3.2.8 from binding a UDP socket to a port already in use.
...
At least on Mono 3.2.8 (but not under Windows), one can bind multiple UDP sockets to the same port by default.
Different simulators cannot demultiplex each other's messages, so a set of confusing non-obvious errors arise if this occurs.
This change prevents such multiple binding.
2014-11-25 23:23:09 +00:00
b53be022f2
On pCampbot, if we add the none (n) behaviour then make it actually stop any bots in motion.
...
Previously, adding this behaviour after physics (p) would leave the bot to drift off for ever in its last movement direction.
2014-11-25 23:23:09 +00:00
3a1ce2715a
Add "wearables check" console command
...
This checks that all the wearable assets and any assets for a given logged in avatar exist in the asset service
2014-11-25 23:23:09 +00:00
9b09dd3575
Add "wearables show" console command.
...
This shows summary wearables information (shape, hair, etc.) for all avatars in the scene or specific information about a given avatar's wearables.
Similar to the existing "attachments show" command.
2014-11-25 23:23:09 +00:00
5ab5d7fe47
Fix recent regression where adaptive throttles stopped adjusting.
...
Extends regression tests to test response of adaptive throttles to ack'ed and expired packets.
2014-11-25 23:22:20 +00:00
b2e377f168
Fix setting of max scene throttle so that setting it restricts the child client throttles properly.
...
In "show throttles", also renames 'total' column to 'actual' to reflect that it is not necessarily the throttles requested for/by the client.
Also fills out 'target' in non-adapative mode to the actual throttle requested for/by the client.
2014-11-25 23:22:20 +00:00
b114f5626e
Add request drip rate to assertions for token bucket regression tests
2014-11-25 23:22:20 +00:00
8a949f0ee1
Add regression tests for token buckets on their own
2014-11-25 23:22:20 +00:00
ec3b43d28d
Make regression throttle tests consistently test target and max throttle settings.
...
As part of this also refactors code to put all throttle asserts in a single regression test method
2014-11-25 23:22:20 +00:00
548abb3b47
minor: In "show client stats" command, properly handle the case where a client has made no AgentUpdate requests (as is the case with agents that have only even been child) rather than throwing an exception
2014-11-25 23:22:20 +00:00
a9dde81753
minor: Correct letter accidentally added to copyright notice on top of Scene.cs (almost five years ago!)
2014-11-25 23:22:20 +00:00
b7ef6009a7
In Scene.AddNewAgent(), avoid a situation where an exception can result in a client being added to the manager without IClientAPI.SceneAgent being set.
...
This is done by adjusting the order of code so that SceneAgent will always be set before adding the client.
Various parts of the code (rightly) assume that a a client registered to the manager will always have a SceneAgent set no matter what.
2014-11-25 23:22:20 +00:00
e6af551007
For now, send all non-full terse updates for ones own avatar directly to the LLUDP client stack rather than queueing internally within LLClientView.
...
When an HG avatar enters a scene, it delays processing of entity updates. Could be crowding out by other updates or something else.
This delay in ones own av mvmt updates results in mvmt lag experienced on the client. Avoiding the internal LLClientView for these packets appears to resolve this issue.
Appears most noticeably for avatars with attachments, though has also been seen on those without sometimes. Hasn't been observed for non-HG avatars in general.
Will be investigating exactly what the problem is, at which point there will be a more permanent solution.
2014-11-25 23:22:20 +00:00
10095c1a58
Add "debug lludp throttles get/set request" and get current
...
This allows one to set the requested throttle (which normally comes from the client) as opposed to the max.
2014-11-25 23:22:19 +00:00
61d6bd78b3
Change the word order of some debug lludp settings for readability
...
On server, scene-throttle-max becomes max-scene-throttle and likewise max-new-client-throttle
On clients, throttle-max becomes max
2014-11-25 23:22:19 +00:00
44dc58cc7f
Add "debug lludp get/set new-client-throttle-max" to allow default new client throttle to be set separately from existing clients.
...
"debug lludp throttles get/set throttle-max" now only gets and sets current max client throttles
2014-11-25 23:22:19 +00:00
68d0c4d37b
Add "debug lludp get" command which currently just shows scene-throttle-max to mirror "debug lludp set"
...
Information is also available in "show server throttles" but that's more for non-debug info rather than attempting to get and set parameters on the fly for debug purposes.
2014-11-25 23:22:19 +00:00
336790e7b4
Add some more llGiveInventory() regression tests
2014-11-25 23:22:19 +00:00
1eb3e6cc43
When inserting missing CreatorData in the HGAssetMapper, do the rewrite on a streaming xml basis rather than loading it all into memory via XmlDocument.
...
This is because objects with lots of parts can have a lot of xml to load into memory, and this has been seen to have a noticeable performance impact.
Whereas streaming has been seen to reduce the impact in normal serialization.
Implmentation is messy but I couldn't see a better way of doing it when you can't assume that you know the exact structure of the input XML.
2014-11-25 23:21:38 +00:00
f7ab3e20bc
Add regression test TestPostAssetRewrite() to check results of HGAssetMapper.Post() object asset rewriting,
2014-11-25 23:21:38 +00:00
6c043dd6ff
If an exception makes it to the top of a JobEngine request, catch and log instead of letting it terminate the simulator...
2014-11-25 23:21:38 +00:00
16a5e15443
Allow GetMesh capability to be served directly by a server like GetTexture
...
To do this required GetMesh to be converted to a BaseStreamHandler
Unlike GetTexture connector, no redirect URL functionality yet (this wasn't present in the first place).
2014-11-25 23:21:38 +00:00
281969093f
Start JobEngine by default in simulator for now.
2014-11-25 23:21:38 +00:00
1c9529aa9e
If JobEngine is active, then use it to copy/rez attachments for an avatar entering the scene that isn't initially logging on. This will execute tasks consecutively rather than concurrently.
...
This has two aims
1) Reduce initial teleport failures when a foreign Hypergrid user enters a region by not holding up the teleport for attachment rez (this can be particularly costly when HG gets all assets in the object graph.
2) Reduce server load that may impact other simulator activities.
This complements existing JobEngine options that perform initial login attachment rez and appearance send in consecutive tasks.
2014-11-25 23:21:38 +00:00
90f9cea07b
minor: be consistent about reporting errors out of HttpServerBase
2014-11-25 23:21:38 +00:00
f4424bdfcf
If the port entry in [Network] for a server is missing, then actually tell the user that's the problem rather than simply exiting silently.
...
Also exit with Environment.Exit(), not by aborting the thread.
2014-11-25 23:21:38 +00:00
8ddcd16c69
Add an IConfigSource constructor to HGAssetBroker so that it can be instantiated directly for potentially handling some capabilities directly in services with HG active
2014-11-25 23:21:38 +00:00
d33964222a
Fix an issue where specifying both max client and server outgoing UDP throttles would cause client throttles to be lower than expected when total requests exceeded the scene limit.
...
This was because specifying a max client throttle would always request the max from the parent server throttle, no matter the actual total requests on the client throttle.
This would lead to a lower server multiplier than expected.
This change also adds a 'target' column to the "show throttles" output that shows the target rate (as set by client) if adaptive throttles is active.
This commit also re-adds the functionality lost in recent 5c1a1458
2014-11-25 23:21:38 +00:00
ead32de790
Use automatic properties for Parent and TotalDripRequest in TokenBucket to make code analysis easier. No functional change.
2014-11-25 23:21:37 +00:00
40314b56f2
Remove the unnecessary intermediate total token bucket.
...
This only had one child, which is the 'adaptive' token bucket.
So from testing and currently analysis, we can use that bucket directly which simplifies the code.
2014-11-25 23:21:37 +00:00
93f3444de1
minor: remove warnings from unused fields in LocalGridServicesConnector
2014-11-25 23:21:37 +00:00
dacd0ecfee
minor: Remove unused field from EntityTransferModule
2014-11-25 23:21:37 +00:00
a98b514184
minor: remove compiler warning from unused field in SimulatorFeaturesModule
2014-11-25 23:21:37 +00:00
0d77796584
minor: resolve warnings from unused fields in XBakesGet and Post handlers
2014-11-25 23:21:37 +00:00
d5ead532cb
Remove compiler warning from UserProfilesHandlers
2014-11-25 23:21:37 +00:00
07a7f941e5
minor: remove warning in BasicHttpAuthentication by commenting out unused remove_me parameter (which looks like it might still be potentially useful for logging)
2014-11-25 23:21:37 +00:00
df031fe8be
extend TestClientThrottleRegionLimited for 2 clients after testing 1. Renames to TestSingleClientThrottleRegionLimited()
2014-11-25 23:21:37 +00:00
dce98acb69
Add regression test TestClientThrottleRegionLimited() for testing simple behaviour of throttles where a region-wide total outbound limit is in place.
2014-11-25 23:21:37 +00:00
075f718f3f
factor out common throttle setting byte[] array construction in ThrottleTests.
2014-11-25 23:21:37 +00:00
9cdd38d0cf
Add regression test TestClientThrottleLimited() for throttle behaviour when a max client total limit is enforced server-side
2014-11-25 23:21:37 +00:00
fc878a33ed
refactor: consistently put all test classes in the OpenSim.Tests.Common package rather than some in OpenSim.Tests.Common.Mock
...
the separate mock package was not useful and was just another using line to always add
2014-11-25 23:21:37 +00:00
af0a851eba
minor: disable logging in regression test TestClientThrottleSetNoLimit
2014-11-25 23:18:40 +00:00
9934e2c545
minor: comment out unused method in regression BasicCircuitTests
2014-11-25 23:18:40 +00:00
746defa094
Add basic regression test ThrottleTests.TestClientThrottleSetNoLimit
2014-11-25 23:18:40 +00:00
52370ac94d
refactor: Move test clientstack setup code out of BasicCircuitTests into OpenSim.Tests.Common.ClientStackHelpers
2014-11-25 23:18:40 +00:00
87d5da86a1
Fix recent regression in "debug lludp throttles get" command that stopped it printing any information. Also fix max throttle displayed to be properly kbps
2014-11-25 23:18:40 +00:00
a13022c296
minor: in "show server throttles", display unset if new client throttle value is not set rather than 0
2014-11-25 23:18:40 +00:00
44e0a2f906
Add throttle-max option to "debug lludp throttles set" to allow runtime setting of default and existing client throttles.
...
Doesn't yet adjust until clients submit new throttle settings.
2014-11-25 23:18:40 +00:00
5c13980eb7
Change "debug lludp throttle *" commands to "debug lludp throttles" for consistency (and because I keep typing throttles).
...
This will still work with "debug lludp throttle" anyway.
2014-11-25 23:18:40 +00:00
d20aeefef2
Fix console set and get of max scene rate. Was performing wrong calculation - throttle buckets are set in bytes, not bits
2014-11-25 23:18:40 +00:00
10d09e287c
Eliminate 'max' throttle setting from server throttles report since this never applies.
2014-11-25 23:18:40 +00:00
679eaec22f
Allow "debug lludp throttle *" commands to work without a user name, in which case they apply to all users in the lludp server
2014-11-25 23:18:39 +00:00
a142edec03
minor: add apparant total to logging when client sets throttles
2014-11-25 23:18:39 +00:00
c73e62ea3a
minor: fix bug in throttle logging where arguments were mismatched
2014-11-25 23:18:39 +00:00
1d33a40f59
Add "debug lludp set scene-throttle-max <value>" console command to allow us to potentially set the scene max throttle on the fly.
2014-11-25 23:18:39 +00:00
a5eabdade3
Move information about "server agent rate" throttles into "show server throttles" command rather than "show throttles"
...
THis allows us to see the rates when no client is connected to the region.
2014-11-25 23:18:39 +00:00
c8f5add2fc
Add "show server throttles" command for showing server specific information about throttles
...
This is separate from the user-oriented "show throttles" command since one will often only want to know about varying client throttle settings.
Currently displays max scene throttle and adaptive throttles config if set.
2014-11-25 23:18:39 +00:00
bb5e2e1f02
refactor: Use simpler auto-implemented property for HttpPort in GridRegion
2014-11-25 23:18:39 +00:00
13e2af7525
minor: Remove compiler warning from GridRegion in IGridService
2014-11-25 23:18:39 +00:00
968b588bb9
minor: remove compiler warning from OpenProfileClient
2014-11-25 23:18:39 +00:00
51eb8facd6
Add OutgoingPacketsQueuedCount clientstack stat.
...
This is the total of queued outgoing packets across all connections, as also seen in the "show queues" command.
Gives some early indication of whether the simulator can't send all outgoing packets fast enough.
Though then one would want to check that this isn't due to a few bad client connections.
2014-11-25 23:18:39 +00:00
4c5fbf8b0a
minor: Remove compiler warnings from unused fields in TokenBucket
2014-11-25 23:18:39 +00:00
12daa3c3d9
refactor: Move LLUDPServer console commands into their own class.
2014-11-25 23:18:39 +00:00
f0fd2fa325
refactor: rename "debug lludp throttle status" to "debug lludp throttle get" to match set command
2014-11-25 23:18:38 +00:00
e144958e03
Add "debug lludp throttle set" command to allow setting of parameters at runtime
...
Can currently only set adaptive true|false, where adaptive = false
2014-11-25 23:18:38 +00:00
b9b483151f
Eliminate a few unnecessary calculations in the maintenance loop.
...
Also uses wait event instead of sleep for periodicity control.
2014-11-25 23:18:38 +00:00
7d30bb13be
Fix recent minor regression where the default frame time wasn't being set if there was no startup config section.
...
Caused some regression tests to fail.
2014-11-25 23:18:38 +00:00
8d72145112
If Bullet is running on its own thread, use a reset event to control timing rather than a sleep.
...
In theory, there should be no difference between these mechanisms.
However, on at least Mono 3.2.8 waiting via an event appears to be much more accurate.
2014-11-25 23:18:38 +00:00
7bababaab6
Improve frame time stability by taking a few unnecessary repeated calculations out of the main scene loop.
...
Also uses a wait event to sleep rather than a Thread.Sleep to allow the loop to be interrupted in a more controlled manner when necessary.
2014-11-25 23:18:38 +00:00
23561239ee
Make BulletSim thread be ThreadPriority.Highest if running
...
Will only effect Windows or mono with a patch such as https://gist.github.com/justincc/31e52218d098529b4696 applied
For test purposes
2014-11-25 23:18:38 +00:00
cfc4055991
Make outboudn and packet inbox handling threads highest priority.
...
Will only have any affect under Windows or mono with a patch such as https://gist.github.com/justincc/31e52218d098529b4696 (not recommended) applied.
For assessment purposes.
2014-11-25 23:18:38 +00:00
5b6fb7245a
Set ThreadPriority on main scene thread to highest.
...
This will only have an effect on Windows systems or mono with the (not recommended) mono-3.2.8 debug patch https://gist.github.com/justincc/31e52218d098529b4696 applied
2014-11-25 23:18:38 +00:00
d3ed5de77d
Add loglevel to jobengine that can be controlled via "debug jobengine loglevel <level>".
...
Defaults to 0
Level 1 currently does verbose logging about every queued and processed job.
2014-11-25 23:18:38 +00:00
9fb3065d33
Temporarily add root agent rez attachments work to job engine if it is running rather than as a fire and forget.
...
Experiment to see if serializing attachment rez and send initial data jobs improves other parts of sim performance.
2014-11-25 23:18:38 +00:00
859b1c5ba4
Add experimental job engine to see if queueing some existing async work during root agent entry to a region improves perf rather than always attempting to execute everything concurrently
...
Job engine is controlled via "debug jobengine start|stop|status".
Can only currently be enabled and disabled dynamically at runtime.
Currently only applies to code sending initial region data (objects, other avatar data) to a client.
2014-11-25 23:18:37 +00:00
c5a0f0ba36
Temporary hack to disable av to av collisions in bulletsim.
...
Need to do this for a test. Final implementation will be properly controlled through a property.
2014-11-25 23:18:37 +00:00
41cc73233c
Re-work handling of email notifications settings.
2014-11-24 11:00:47 -05:00
12108bf6e9
Fix handling of user preference updates where no email address is supplied
2014-11-23 14:25:48 -05:00
7813780eba
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-11-22 20:14:31 -08:00
0997ce8629
Small improvements to SimulatorFeaturesModule: (1) don't overwrite extras if the grid response is invalid; (2) make the name of the config variable for destination guide consistent with the grid-wide name in LoginService; (3) account for the existence of a [USERID] in the destination guide URL
2014-11-22 20:14:09 -08:00
5bc389ff71
When logging reigon information returned by GateKeeperService.GetHyperlinkRegion, log the return server URL returned.
...
This helps diagnoses misconfiguration where, for instance, a LAN ExternalHostName has been configured that isn't reachable externally.
2014-11-21 20:40:59 +00:00
8d3cb424a8
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-11-21 08:54:30 -08:00
27512f3b42
Cleanup extraneous comments from viewer support modules
2014-11-21 08:54:10 -08:00
cfaf904a3b
LSL key should be implicitly cast to a boolean value
...
Signed-off-by: James Hughes <jamesh@ascent.bluewallgroup.com>
2014-11-20 11:32:46 -06:00
c155656349
Minor: Include missing EventHost power for group owner role.
2014-11-19 20:25:27 +00:00
3247a7cb3e
refactor: capitalize SOP.moveToTarget() and stopMoveToTarget() in accordance with code guidelines and the rest of the methods.
2014-11-19 20:12:28 +00:00
7a2c77e7ea
If calling llStopMoveToTarget() on an in-world prim, don't send an unnecessary object update if the prim was not moving to target.
...
This involves making PhysicsActor.PIDActive get as well as set.
On physics components that don't implement this (all characters and some phys engines) we return false.
2014-11-19 20:06:56 +00:00
bdebd525db
Remove SOP.StopMoveToTarget scheduled update which is now being done in SOG.stopMoveToTarget() as of last commit 67e568
2014-11-19 19:16:03 +00:00
67e56872f3
If llStopMoveToTarget() is called on an attachment, then stop the avatar if it was moving to target.
...
Same behaviour as on Linden Lab grid.
Will probably also address http://opensimulator.org/mantis/view.php?id=7369 by not generating spurious object updates when llStopMoveToTarget() is called in attachments where the avatar is not moving.
2014-11-19 19:08:33 +00:00
b9f870fa73
Minor: Update LLLoginService to handle explicitly set login locations that include decimal precision. Fractions might be introduced if setting the initial login location from a viewer splash screen with data from the DataSnapshot service. At present the fractions cause regex to fail when matching the login string causing an exception.
2014-11-19 18:44:45 +00:00
d3b43a96fb
Add 'terrain feature' command
2014-11-19 18:18:18 +00:00
6a8353af36
Improved SpecialUIModule so that it sends the floater data properly.
2014-11-16 10:27:10 -08:00
1a02e5d2db
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-11-11 20:42:42 -08:00
32293cfd6b
Fix the fetching of module references in the viewer support modules.
...
Remove the detachment of attachments in camera-only, because it doesn't work for HG people, and it's too drastic of a move.
2014-11-11 20:42:13 -08:00
5aa8ba1b45
Fix issue where llRemoteLoadScriptPin() would treat 0 (the default) as a valid set pin in a destination prim rather than the unset no pin state
...
Adds regression test for this case.
2014-11-11 17:59:56 +00:00
89cb07eb49
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-11-10 21:18:33 -08:00
Justin Clark-Casey (justincc)