ae58cf4224
TOS module. WARNING: migration in GridUser table.
2012-09-25 20:03:49 -07:00
bbaf2c5a80
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.cs
2012-09-24 20:14:00 +01:00
f2a9d26118
Make ResendAppearanceUpdates = true by default in [Appearance] in OpenSimDefaults.ini.
...
This resends appearance uuids to avatars in the scene once a minute.
I have seen this help in the past resolve grey appearance problems where viewers have for unknown reasons sometimes ignored the packet.
The overhead is very small since only the UUIDs are sent - the viewer then requests the texture only if it does not have it cached.
This setting will not help with cloudy avatars which are usually due to the viewer not uploading baked texture data or uploading something that isn't valid JPEG2000
2012-09-20 01:40:05 +01:00
d29fc53052
Fix some inconsistencies in configurartion: NonPhys prims
...
Fix inconsistencies between configuration parameter names and their description names. Changing the configuration parameters for non physical prim size min-max from Nonphys* to NonPhys*.
Please update your OpenSim.ini and Regions.ini to reflect these changes.
2012-09-18 09:53:45 -04:00
db774d4292
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Framework/EntityTransfer/HGEntityTransferModule.cs
OpenSim/Region/Framework/Scenes/EventManager.cs
2012-09-16 04:11:20 +01:00
ebb394bbda
Fix indentation and issues where tabs were used instead of spaces in commit 783ee949
2012-09-12 01:45:34 +01:00
0d97beefce
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.cs
2012-09-09 13:30:24 +01:00
783ee949ea
implementing per-region configuration of limits on the number of prims one can have in a linkset
...
Applied with changes - patch was based on a repo different from core
Signed-off-by: Melanie <melanie@t-data.com>
2012-09-09 12:59:25 +01:00
924df14c5e
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Capabilities/Handlers/GetTexture/GetTextureHandler.cs
OpenSim/Framework/Servers/VersionInfo.cs
2012-09-07 19:49:46 +01:00
8f02fd926e
If reusing dynamic textures, do not reuse small data length textures that fall below current viewer discard level 2 thresholds.
...
Viewer LL 3.3.4 and before sometimes fail to properly redisplay dynamic textures that have a small data length compared to pixel size when pulled from cache.
This appears to happen when the data length is smaller than the estimate discard level 2 size the viewer uses when making this GetTexture request.
This commit works around this by always regenerating dynamic textures that fall below this threshold rather than reusing them if ReuseDynamicTextures = true
This can be controlled by the [Textures] ReuseDynamicLowDataTextures config setting which defaults to false.
2012-09-06 22:12:05 +01:00
1b15144208
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Data/MySQL/MySQLSimulationData.cs
OpenSim/Region/ClientStack/Linden/UDP/LLClientView.cs
OpenSim/Region/CoreModules/Scripting/LSLHttp/UrlModule.cs
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/OSSL_Api.cs
2012-08-31 01:32:18 +01:00
3ed0d79b00
Make ReuseDynamicTextures an experimental config setting in [Textures]. Default is false, as before.
...
If true, this setting reuses dynamically generated textures (i.e. created through osSetDynamicTextureData() and similar OSSL functions) where possible rather than always regenerating them.
This results in much quicker updates viewer-side but may bloat the asset cache (though this is fixable).
Also, sometimes issue have been seen where dynamic textures do not transfer to the viewer properly (permanently blurry).
If this happens and that flag is set then they are not regenerated, the viewer has to clear cache or wait for 24 hours before all cached uuids are invalidated.
CUrrently experimental. Default is false, as before.
2012-08-30 22:57:40 +01:00
aee7a31bc3
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.cs
OpenSim/Region/Framework/Scenes/SceneObjectGroup.cs
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
OpenSim/Region/ScriptEngine/XEngine/XEngine.cs
2012-08-18 13:17:39 +01:00
ccc69d66a1
BulletSim: add parameters and functionality to specify the mesh
...
level of detail for large meshes.
Remove parameter and code for DetailLog (conditional logging into
regular log file).
2012-08-17 13:34:18 -07:00
90ad98370a
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
2012-08-16 02:46:48 +01:00
2b982ab212
BulletSim: add physics logging parameters to OpenSimDefaults.ini. Remove trailing semis from some the of the value definitions.
2012-08-15 12:08:25 -07:00
93e3ab3ebd
Merge branch 'master' into careminster
2012-08-11 17:32:30 +01:00
5ab151c2d6
BulletSim: add avatar code to keep avatars from ending up trapped under the terrain
2012-08-08 13:48:49 -07:00
b9c4a637b4
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.cs
2012-08-04 03:00:20 +01:00
205f2326dc
Consolidate PersistBakedTextures, DelayBeforeAppearanceSend and DelayBeforeAppearanceSave into [Appearance] section from [Startup] config section so that all appearance settings are in the same place and not in the startup bucket.
...
All these settings are in OpenSimDefaults.ini only. If you are using them then please adjust your OpenSim.ini
2012-08-03 23:02:39 +01:00
789e88d8bd
Move previously unadvertised SendPeriodicAppearanceUpdates setting from [Startup] to [Appearance] config section.
...
Add description and default of false (as before) to OpenSimDefaults.ini
If set to true, this config switch will resend avatar appearance information (a small amount of UUID data, not the baked textures themselves) to other avatars in the sim every 60 seconds.
For me, this has helped with situations where avatars appear persistently grey - the LL viewer sometimes did not appear to request assets the first time the appearance data was sent.
However, this switch will not help with other appearance failure situations (e.g. failure to bake assets).
This setting is experimental but will not have any significant impact on the simulator if turned to true.
2012-08-03 21:36:00 +01:00
0c00abcce1
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/SceneObjectGroup.cs
2012-08-03 16:46:11 +01:00
8b04e8a297
BulletSim: Debugging log statements added. Reduced size of updata buffer trying to find a corrupted memory problem. Update DLL and SO.
2012-08-02 16:30:23 -07:00
771d79e83e
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Framework/Monitoring/BaseStatsCollector.cs
OpenSim/Region/Application/OpenSim.cs
OpenSim/Region/Application/OpenSimBase.cs
OpenSim/Region/Framework/Scenes/SceneManager.cs
bin/OpenMetaverse.Rendering.Meshmerizer.dll
bin/OpenMetaverse.StructuredData.dll
bin/OpenMetaverse.dll
bin/OpenMetaverseTypes.dll
prebuild.xml
2012-07-28 00:39:36 +01:00
7d30637d51
BulletSim: refactor all the linkset logic out of the prim class
...
and into its own class. The BulletSim data structures track
individual prims as linksets of 1 so most of the prim code is not
different between a linked and unlinked object.
2012-07-26 16:05:57 -07:00
d7add2940a
BulletSim: add parameters for setting linkset constraint factors
2012-07-25 16:31:08 -07:00
eab211f94d
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Scripting/LSLHttp/UrlModule.cs
OpenSim/Region/Framework/Scenes/SceneObjectGroup.cs
OpenSim/Region/Framework/Scenes/SceneObjectPartInventory.cs
OpenSim/Region/ScriptEngine/XEngine/XEngine.cs
2012-06-21 01:10:13 +01:00
22f25dfcab
Implement max_external_urls_per_simulator setting in [LL-Functions] to allow configuration of how many urls can be set up by llRequestURL()
...
Defaults remains as 100.
This setting is per simulator instead of per region due to how the url script module is structured.
2012-06-16 03:32:47 +01:00
d893e54f4b
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ClientStack/Linden/UDP/LLClientView.cs
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
2012-06-14 00:10:52 +01:00
7c0843aad1
Add the updated OpenSimDefaults.ini for the prior timer_Interval patch.
2012-06-12 21:55:31 -04:00
8c91e761c8
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ClientStack/Linden/UDP/LLClientView.cs
OpenSim/Region/ClientStack/Linden/UDP/LLUDPServer.cs
2012-06-09 16:28:22 +01:00
08cd5d2503
Add documentation to AllowGodFunctions setting in [LL-Functions]
2012-06-09 00:33:17 +01:00
e733fb32cf
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/World/Warp3DMap/Warp3DImageModule.cs
OpenSim/Region/Framework/Scenes/Scene.cs
OpenSim/Region/Framework/Scenes/SimStatsReporter.cs
2012-06-06 13:07:05 +01:00
008c6a4610
Mantis 4597 AgentPaused packet is ignored.
...
The packet was actually being handled but not acted on.
This change extends the default timeout for paused clients to 5 minutes
and makes both the paused and non-paused timeout periods configurable.
2012-06-05 01:22:05 +01:00
e80161753f
Merge branch 'master' into careminster
2012-05-31 03:35:24 +01:00
0b02a4d42e
Add an optional mechanism for physics modules to collect and return arbitrary stats.
...
If active, the physics module can return arbitrary stat counters that can be seen via the MonitoringModule
(http://opensimulator.org/wiki/Monitoring_Module )
This is only active in OdeScene if collect_stats = true in [ODEPhysicsSettings].
This patch allows OdeScene to collect elapsed time information for calls to the ODE native collision methods to assess what proportion of time this takes compared to total physics processing.
This data is returned as ODENativeCollisionFrameMS in the monitoring module, updated every 3 seconds.
The performance effect of collecting stats is probably extremely minor, dwarfed by the rest of the physics code.
2012-05-31 01:52:26 +01:00
884c0e7bb1
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Data/MySQL/MySQLSimulationData.cs
OpenSim/Data/MySQL/Resources/RegionStore.migrations
OpenSim/Region/CoreModules/Avatar/Attachments/AttachmentsModule.cs
OpenSim/Region/CoreModules/Framework/EntityTransfer/EntityTransferModule.cs
OpenSim/Region/CoreModules/Framework/InventoryAccess/InventoryAccessModule.cs
OpenSim/Region/CoreModules/ServiceConnectorsOut/Simulation/LocalSimulationConnector.cs
OpenSim/Region/Framework/Scenes/Scene.cs
OpenSim/Region/Framework/Scenes/SceneObjectPartInventory.cs
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/OSSL_Api.cs
2012-05-27 19:24:30 +01:00
bc543c1797
Environment Module - allows Environment settings for Viewer3 warning: includes database region store migrations for mssql, mysql, sqlite
...
enable/disable this module:
Cap_EnvironmentSettings = "localhost" (for enable)
Cap_EnvironmentSettings = "" (for disable) at ClientStack.LindenCaps section (OpenSimDefaults.ini file)
or owerwrite in OpenSim.ini
mantis: http://opensimulator.org/mantis/view.php?id=5860
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2012-05-23 17:04:19 -04:00
ebd9d2618b
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.cs
OpenSim/Region/RegionCombinerModule/RegionCombinerModule.cs
2012-05-19 13:34:44 +01:00
9fa0577c7e
Enable FetchInventoryDescendents2 and FetchInventory2 caps by default. This appears to be required now for LL 3.3.1 to work properly.
...
Without this, LL 3.3.1 continually pushes LLInventoryModelFetchDescendentsResponder::error 499 to its log.
This cap will be ignored by older viewers - UDP inventory will work normally.
2012-05-19 00:00:52 +01:00
90305001de
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Framework/EntityTransfer/EntityTransferModule.cs
OpenSim/Region/Framework/Scenes/Scene.Inventory.cs
OpenSim/Region/Framework/Scenes/Scene.cs
2012-04-27 17:09:49 +01:00
a2d544c938
Add a configuration switch to turn on/off the use of the trash
...
folder when deleting objects from a scene. The use of the trash
folder causes assets to be created and stored everytime you delete
an object from the scene (slows down the delete and adds mostly useless
assets to your database).
Default is on (use the trash folder) which is the standard behavior.
2012-04-25 11:54:57 -07:00
fc9f244a7d
Merge branch 'master' into careminster
2012-04-18 00:28:33 +01:00
2d45ba47ac
add configuration for jsonstore module, disabled by default
2012-04-17 13:55:00 -07:00
4a67e8b98f
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Interfaces/IEstateModule.cs
2012-04-11 23:35:27 +01:00
2b339bfd97
Correct max_listeners_per_region in OpenSimDefaults.ini to max_listens_per_region
...
Value for this setting in OpenSimDefaults.ini (1000) is same as setting in code (1000) so this should have no effect
Thanks to Ovi Chris Rouly for pointing this out.
2012-04-10 17:22:02 +01:00
b18b1b1d70
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
2012-03-27 23:14:43 +01:00
7223b63563
User level based restrictions for HyperGrid teleports, asset uploads, group creations and getting contacted from other grids. Incoming HyperGrid teleports can also be restricted to local users.
2012-03-27 22:09:58 +02:00
6b5f3b49e7
Merge branch 'master' into careminster
2012-03-27 18:11:05 +01:00
84c9bd52d3
BulletSim: update BulletSim binaries and configuration fixing a crash which happens when there are more than a few hundred physical objects.
2012-03-26 13:48:15 -07:00
0bd0514e81
Merge branch 'master' into careminster
2012-03-26 16:47:02 +01:00
ff54b3c366
BulletSim: change default of shouldDisableContactPoolDynamicAllocation from False to True. It seems that collisions don't happen well when it is False (things fall through terrain).
2012-03-23 15:50:32 -07:00
142de1d02f
BulletSim: add a bunch of internal Bullet configuration parameters to OpenSimDefaults.ini and the code.
2012-03-23 13:15:23 -07:00
de24feb275
BulletSim: Add AvatarRestitution parameter. Centralize computation of buoyancy for flying. Tweek avatar default friction and resititution
2012-03-23 13:15:17 -07:00
b22d040169
BulletSim: add some new runtime setable parameters to match the dll.
2012-03-23 13:15:14 -07:00
9a67baae21
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.cs
2012-03-23 14:24:55 +00:00
e5b182fb41
Add information about SendPeriodicAppearanceUpdates to OpenSimDefaults.ini for now.
...
Default remains false.
2012-03-23 03:38:33 +00:00
9edf99703a
Merge commit 'df624c13c98b06d57311c1d93ecbd4790553f3b3' into careminster
2012-03-22 23:01:50 +00:00
25e5b6a76c
Added new simple_build_permissions config to the .ini and .example files.
2012-03-22 14:21:07 -07:00
45b588cf00
Revert "Simple build permissions feature. NOTE: EXPERIMENTAL, DISABLED BY DEFAULT. Turns out that this can't be expressed by cascading Permission modules, so I did it as per this patch."
...
This reverts commit 6146e7ef25
2012-03-22 20:10:38 +00:00
6146e7ef25
Simple build permissions feature. NOTE: EXPERIMENTAL, DISABLED BY DEFAULT. Turns out that this can't be expressed by cascading Permission modules, so I did it as per this patch.
2012-03-22 12:57:12 -07:00
c7e302864a
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/World/Estate/EstateManagementModule.cs
OpenSim/Region/Framework/Scenes/Scene.PacketHandlers.cs
OpenSim/Region/Framework/Scenes/Scene.cs
2012-03-18 20:44:56 +00:00
a2009ffe2e
Terrain: added [Terrain] section with an option to load an initial flat terrain. Default is still pinhead island. I much rather have a flat land in the beginning.
2012-03-16 13:08:05 -07:00
272ba5a741
Merge branch 'master' into careminster
2012-02-15 01:11:17 +00:00
33e66107be
Fix: Lightshare Module(Windlight)-Region settings are not applicable for database sqlite mantis: http://opensimulator.org/mantis/view.php?id=5888
2012-02-14 02:06:42 +00:00
f49897a419
Clamp ODE character velocity. Make ODE falling character 54m/s by default.
...
If velocity reaches 256 in any vector then bad things happen with ODE, so we now clamp this value.
In addition, a falling avatar is clamped by default at 54 m/s, which is the same as a falling skydiver.
This also appears to be the value used on the linden lab grid.
This should resolve http://opensimulator.org/mantis/view.php?id=5882
2012-02-11 02:28:40 +00:00
236e1c45f2
Merge branch 'master' into careminster
2012-02-07 23:30:48 +00:00
a4367e75d3
Set UseMeshiesPhysicsMesh = true in [Mesh] by default
...
This means that uploaded meshes will get a physics (collision) mesh if uploaded with that option via a viewer.
2012-02-07 23:15:23 +00:00
54fc78013d
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.cs
2012-02-05 20:58:04 +00:00
44badf452e
change NonPhysicalPrimMax to NonphysicalPrimMax to make this variable
...
work correctly, it was being ignored because of the case, this effects
OpenSim.ini.example and OpenSimDefaults.ini
2012-02-04 19:41:25 -07:00
9a86a713d3
Merge branch 'master' into careminster
2012-01-29 22:50:59 +00:00
e8b688b61f
Fix:Get embedded objects in notecard http://opensimulator.org/mantis/view.php?id=2607
...
Signed-off-by: nebadon <michael@osgrid.org>
2012-01-29 12:40:43 -07:00
4ce42762ee
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.Inventory.cs
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
2012-01-26 00:21:21 +00:00
e9de7e7107
Update BulletSim.dll with some interface changes and tuning (see opensim-libs). Change BSScene to use new interface.
2012-01-25 14:40:38 -08:00
9bab43b4d1
eliminate a few tabs from OpenSimDefaults.ini
2012-01-06 21:36:30 +00:00
5f682b51ec
Add disabled Cap_FetchInventory2 = "" reference to [ClientStack.LindenCaps] in line with all the other ones that are there
2012-01-06 21:29:18 +00:00
11c48ac807
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
OpenSim/Region/ScriptEngine/Shared/Tests/LSL_ApiTest.cs
2012-01-06 21:41:36 +00:00
eef6f92029
Merge branch 'master' into careminster
2011-12-22 19:52:59 +00:00
48113f0fc8
Make it possible to force all prims to be phantom via the collidable_prim boolean setting in the OpenSim.ini config [Startup] section.
...
Naturally, default is true.
When set to false, "phantom" flags on prims can be set as usual but all prims remain phantom.
This setting is for test purposes.
This switch does not affect the collision of avatars with the terrain.
2011-12-22 19:44:52 +00:00
f025387f10
Set adaptive throttles false by default because it doesn't play nice with AVN
...
code
2011-12-09 19:56:03 +01:00
dc612d0f08
Merge branch 'master' into bigmerge
...
Conflicts:
OpenSim/Region/Framework/Scenes/SceneObjectPartInventory.cs
2011-11-28 11:06:38 +00:00
676d32974a
Implement the FetchInventoryDescendents2 capability using the same code as WebFetchInventoryDescendents.
...
Enabling this by setting Cap_FetchInventoryDescendents2 = "localhost" in the [ClientStack.LindenCaps] section of OpenSim.ini downloads inventory via http rather than udp in later viewers.
2011-11-25 22:46:42 +00:00
b785f204ce
remove some mono compiler warnings
2011-11-25 22:19:57 +00:00
bdb5ac96d9
Merge branch 'master' into bigmerge
...
Conflicts:
OpenSim/Region/Framework/Scenes/SceneCommunicationService.cs
OpenSim/Region/ScriptEngine/XEngine/XEngine.cs
2011-11-19 22:39:15 +00:00
9d458fdd7f
Turn the [RegionReady] module on by default and login_disable = true while scripts are loading.
...
From field experience, we know that simulators can be unstable if a user logs in before the scripts have finished loading.
This commit turns login_disable = true in [RegionReady] on by default which prevents this from happening.
If you want the old behaviour, please copy these section from OpenSimDefaults.ini into OpenSim.ini and set login_disable = false
2011-11-18 21:31:23 +00:00
169387b390
Turn SellEnabled in the [EconomyModule] on by default.
...
This only provides enough functionality to allow operations for no money (e.g. sell for $0).
2011-11-17 23:53:25 +00:00
2d4ac6288d
Alter commit 3758306 to allow region name to be substituted within a region console prompt
...
This is to allow broader subsitution in the future. Currently, the only substitions are \R (for region name) and \\ (for a single backslash)
e.g. "Region (\R) " is the current and continuing default prompt
This renames custom_prompt in [Startup] to ConsolePrompt
2011-11-10 22:56:13 +00:00
4939d99b57
Merge branch 'master' into bigmerge
2011-11-10 23:03:50 +00:00
facdc9c46e
Merge branch 'master' into bigmerge
...
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.cs
OpenSim/Region/Framework/Scenes/ScenePresence.cs
2011-11-05 22:56:08 +00:00
4d3926694d
Remove enableprejump config option and associated code as this is now
...
fully functional and cannot be disabled because that would break timings.
2011-11-05 22:43:45 +00:00
24235006f4
Merge branch 'master' into bigmerge
...
Conflicts:
OpenSim/Region/CoreModules/Avatar/Chat/ChatModule.cs
OpenSim/Region/CoreModules/Avatar/Gods/GodsModule.cs
OpenSim/Region/CoreModules/LightShare/LightShareModule.cs
OpenSim/Region/CoreModules/World/Estate/EstateManagementModule.cs
2011-11-04 01:18:37 +00:00
59232a6ea8
Change default say distance to 20m from 30m, the same as on the big grid. This is to improve the migration of scripts that expect a 20m say distance.
...
If you want to keep a 30m say distance then please set this as the say_distance parameter in the [Chat] section of OpenSim.ini.
2011-11-02 20:05:31 +00:00
b69f679122
Merge branch 'master' into bigmerge
...
Conflicts:
OpenSim/Region/CoreModules/World/WorldMap/WorldMapModule.cs
2011-11-01 23:54:09 +00:00
4b58d4ff95
Removed see_into_this_sim_from_neighbor configuration option.
2011-11-01 16:51:14 -07:00
083b28de8c
Merge branch 'master' into bigmerge
...
Conflicts:
OpenSim/Region/Framework/Scenes/SceneObjectGroup.cs
2011-10-30 10:16:25 +00:00
9bdf118e0d
Add missing max_listens_per_region to [LL_Functions] config section in OpenSimDefaults.ini + explanation.
...
This setting controls the maximum number of listeners in a region
2011-10-29 02:45:50 +01:00
6a96c9546d
Merge branch 'master' into bigmerge
...
Conflicts:
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
2011-10-26 17:48:51 +01:00
41395d5443
Added optional owner classes to existing OSSL agent Permissions
...
PARCEL_GROUP, PARCEL_OWNER, ESTATE_MANAGER and REGION_OWNER can be combined with the existing agent uuid option to limit ossl functions to agents and owner classes.
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-10-26 10:35:50 -04:00
90f17785c3
Merge commit '352002fd0b74a87f62ea82c76969e4110ba2542f' into bigmerge
2011-10-25 02:54:53 +01:00
8841b77cd1
Merge commit '3843efe478ed682fd08bf12ea8bd7377c68a36fb' into bigmerge
2011-10-25 01:53:53 +01:00
Diva Canto