3f2ee8915d
Some improvements to prim face numbering - only affects viewers using PrimMesher
2009-07-11 04:53:41 +00:00
a23d64dec1
Formatting cleanup.
2009-06-10 04:28:56 +00:00
f94e192b86
some code cleanup
...
test commit with cygwin svn
2009-06-06 08:41:27 +00:00
1e3f378c57
Fix comparison of UUID with null.
2009-06-04 01:26:31 +00:00
840de6c036
Minor: Change OpenSim to OpenSimulator in older copyright headers and LICENSE.txt.
2009-06-01 06:37:14 +00:00
be41a2cb7e
reduce verbosity of sculpt map cache messages to reporting cache failures only
2009-05-31 23:57:52 +00:00
179724b4fc
some clean up of sculpt map caching code
...
remove a redundant debug message
2009-05-29 08:57:10 +00:00
05cbf0b502
reinstate a hopefully more robust experimental decoded sculpt map caching scheme
2009-05-29 06:50:15 +00:00
1609e7eac0
disable sculpt map caching until a better method of avoiding asset requests can be found
2009-05-29 05:11:50 +00:00
db4f8d1298
Experimental decoded sculpt map caching
2009-05-29 02:46:35 +00:00
1d02636c27
cleaning out warnings.
...
NOTE: we currently have a gazillion warnings caused stuff flagged as
"obsolete" (OGS1 stuff) --- what's up with that?
2009-05-22 14:57:00 +00:00
87b95e324e
Sculpt mesher refactor
...
adds some previously missing geometry to sculpties
new LOD improves vertex accuracy
fix torus mode mesh edge joining
sync with primmesher r37
2009-05-19 10:09:33 +00:00
14c1e991c6
some sculpted prim geometry accuracy and meshing speed improvements
2009-05-15 03:14:04 +00:00
bd3a4e5f01
Added a Copy() method to PrimMesh and SculptMesh as suggested by dmiles. Sync PrimMesher.cs and SculptMesh.cs with PrimMesher.dll r36.
2009-05-08 03:04:45 +00:00
09522743cb
alter behavior of sculpted prim "Inside out" setting. Addresses Mantis #3514
2009-05-03 06:25:52 +00:00
6f3437b77e
some code cleanup
...
sync with primmesher r35
2009-04-24 19:43:15 +00:00
9c13a93583
Limit hollow size of physics proxy to 95%
2009-04-24 19:28:29 +00:00
15b9c528c5
Add some documentation. (note this is *not* a thinly veiled attempt to increase my commit frequency *wink*)
2009-04-18 17:15:56 +00:00
53026affb3
* Instead of referencing mesh stuff in the physics plugin.. change the IMesh Interface. (blame prebuild)
2009-04-11 00:11:54 +00:00
f73d4f9735
unspecified sculpt stitching mode now defaults to plane instead of sphere. Addresses Mantis #3403
2009-04-05 19:25:39 +00:00
5f4cab6ed3
fix an error in hollow cylinder face number calculation
2009-04-03 08:45:32 +00:00
b42fec5c74
partial support for sculpted prim "inside out" setting
2009-04-02 06:54:48 +00:00
8493123629
Hard code scaled image resolution to 96 dpi prior to sculpt meshing to prevent a mono 2.4 failure. Thanks to cmickeyb for pointing out the failure.
2009-04-01 18:38:51 +00:00
ad012d4b46
add x-axis mirror capability to sculpted prim mesh - addresses Mantis #3342
2009-03-26 18:12:10 +00:00
3bedb59f50
make some arrays static to prevent excessive re-initialization - suggested by jhurliman
2009-03-26 03:10:30 +00:00
fa5fef33a9
fixed propagation of normalized sculpt mesh vertex normals
2009-03-15 09:05:35 +00:00
8afad46d10
remove log4net dependency and from PrimMesher.cs
...
sync PrimMesher.cs with PrimMesher.dll version 29 on forge
2009-02-24 06:02:44 +00:00
8f55b9d735
Mantis#3218. Thank you kindly, TLaukkan (Tommil) for a patch that:
...
* Added log4net dependency to physxplugin in prebuild.xml.
* Added missing m_log fields to classes.
* Replaced Console.WriteLine with appropriate m_log.Xxxx
* Tested that nant test target runs succesfully.
* Tested that local opensim sandbox starts up without errors.
2009-02-22 20:52:55 +00:00
7731c055e4
Set sculpt map alpha to 255 prior to scaling and meshing. Addresses Mantis #3150
2009-02-15 04:00:00 +00:00
1a55dd11f1
* More friendly OpenJpeg error handling.
...
* Often times now the only reason OpenJpeg doesn't work is because it requires Glibc 2.4 The error messages reflect that.
* In J2kDecoder module, It stops trying to decode modules if it encounters a dllnotfound exception and instead sends a full resolution layer that causes the texture sender to only send the full resolution image. (big decrease in texture download speed, but it's better then nasty repeating error messages)
2009-01-21 11:16:33 +00:00
032b30ffdb
Fix an error in sculpt LOD calculation
2009-01-21 02:40:09 +00:00
20670ff0c8
sync with primmesher r26 on forge
2009-01-04 19:09:31 +00:00
f836e36c49
Improve LOD scaling for anisotropic sculpted prim meshes
2009-01-04 18:36:13 +00:00
8a86439985
Removed some debugging code that was inadvertently left in in my last commit :/
2008-12-22 07:25:41 +00:00
c66cfb51f7
Fix a floating point comparison that was causing some misshaped triangles on some prim faces
2008-12-22 06:07:51 +00:00
44d133da66
clean up some old debugging code
2008-12-09 08:17:31 +00:00
bdffd56a45
killing warnings, reformatting RemoteAdminPlugin
2008-12-05 15:28:03 +00:00
d324389dd9
Update svn properties.
2008-12-03 04:41:31 +00:00
07ee2c3504
Revert r7548 and r7549 until someone with prebuild-fu can help structure the dependencies
2008-11-30 03:52:18 +00:00
37afd69feb
Removed remaining meshing code
...
Add PrimMesher.dll r21
All meshing tasks are now passed through Meshmerizer and handled by PrimMesher.dll
2008-11-30 03:13:02 +00:00
fdd2388331
Update meshing code to sync with current PrimMesher.cs on forge.
...
Migrate sculpt meshing code to primMesher version. This should result in more accurate physical sculpted prim proxies.
Remove much obsolete code from Region/Physics/Meshing
2008-11-29 11:02:14 +00:00
a3f785e978
Changed sculpted prim texture scaling method to bilinear to reduce scaling artifacts
2008-11-16 00:24:10 +00:00
c6dad833f5
* minor: remove some mono compiler warnings
2008-11-06 21:01:16 +00:00
5fffc04ae6
Add more vertex normals and UV coordinates. Sync with primmesher.dll forge project.
2008-11-05 10:22:41 +00:00
5cf6a7f118
Viewer side normals and UV fixes on profile cuts. Sync with primmesher.dll forge project.
2008-10-29 09:47:45 +00:00
7beeaf51f8
* minor: remove mono compiler warnings
2008-10-28 21:47:43 +00:00
ae5d92a167
some sorely needed extruder code simplification and refactoring, also some fixes to cut face UV coordinates
2008-10-28 08:57:15 +00:00
754f6ba2a2
* minor: remove mono compiler warnings
2008-10-27 20:16:42 +00:00
3447bed8be
Add end faces when radius setting is non-zero
2008-10-24 23:37:09 +00:00
c519b80680
* minor: eliminate some mono compiler warnings
2008-10-24 21:40:05 +00:00
71660003de
un-double-flipped some double-flipped normals in circular path prim end caps
2008-10-24 20:04:34 +00:00
a11fa9055a
Fixed a floating point error accumulation that was causing missing end faces on some twisted prims
2008-10-24 05:31:43 +00:00
931b04485d
More work in vertex normals and texture UVs. Syncing code with pyov.
2008-10-21 01:35:05 +00:00
923f9fb749
* minor: remove mono warnings
2008-10-19 18:45:41 +00:00
b6396bc9a7
More progress towards implementing vertex normals - not complete yet.
2008-10-19 09:04:25 +00:00
98245e4bfa
* minor: Oh go on, one more warning. Oooh, you are naughty
2008-10-15 20:46:39 +00:00
b1248004f0
* minor: remove some warnings
2008-10-15 17:19:02 +00:00
138a3924e0
Committing more work towards implementing vertex normals. Also added some (hopefully) helpful messages for identifying corrupt prims and some fixup code for corrupt profile cut data.
2008-10-13 22:52:39 +00:00
f2700590d7
removed some more extraneous hidden faces
2008-10-12 09:36:01 +00:00
116a08f42e
Fixed a missing face on a profile cut
2008-10-12 08:52:42 +00:00
216787ee1d
Optimization: calculation of profile vertex normals is now disabled as default.
2008-10-12 07:04:52 +00:00
09c8713801
Eliminate some unnecessary polygons
2008-10-11 00:30:27 +00:00
dd886a035b
* minor: remove warnings
2008-10-10 21:05:44 +00:00
62f3e11b4e
Some more decrufting
2008-10-10 09:16:36 +00:00
726e0045d9
Some decrufting
2008-10-10 09:00:52 +00:00
7fbe942792
refactoring PrimMesher to add viewer compatable features and some code cleanup
2008-10-10 08:22:13 +00:00
979a354ba0
Cap proxy mesh scale minimum to 0.01 meter for X, Y, and Z terms.
2008-10-04 17:39:03 +00:00
cf9835130a
Square hollow size in cylinder meshes were a little too small - fixed.
2008-10-02 02:33:45 +00:00
e6afb28355
re-enabled some ODE internal proxies for some simple prim types to try to save some more memory
2008-09-19 09:13:27 +00:00
8ff1bc5b03
* Make the ode simulation update loop print out the stack if an exception occurs (at least, this is what will happen on linux)
2008-09-18 18:54:42 +00:00
b4141f9e56
Formatting cleanup.
2008-09-13 22:07:07 +00:00
8a8b01d1b8
Circular path prim meshes are now joined where the path ends meet if they match. This may have a minor improvement in memory and speed performance, but it's mainly for viewer applications and it also syncs the c# version of PrimMesher with my python sandbox version.
2008-09-13 10:22:17 +00:00
0dc1018ca1
* minor: Remove warnings
...
* leaving in the ones to do with ScriptBase since these actually indicate coding bugs that I don't have the time/brainpower to fix at the moment
2008-09-12 21:20:24 +00:00
febb781779
remove hidden faces inside prim meshes to improve memory use and startup time
2008-09-12 19:42:26 +00:00
fae34bb10c
Update svn properties, formatting cleanup.
2008-09-09 01:26:48 +00:00
7d89e12293
* This is the fabled LibOMV update with all of the libOMV types from JHurliman
...
* This is a HUGE OMG update and will definitely have unknown side effects.. so this is really only for the strong hearted at this point. Regular people should let the dust settle.
* This has been tested to work with most basic functions. However.. make sure you back up 'everything' before using this. It's that big!
* Essentially we're back at square 1 in the testing phase.. so lets identify things that broke.
2008-09-06 07:52:41 +00:00
0fc618e7b2
Replaced a lot of trig calls with lookup tables for common prim types in an attempt to improve meshing speed.
...
Added a new between points interpolation method to improve accuracy of profile cuts in triangle and square profile prims.
2008-09-05 16:38:51 +00:00
109aa00150
fix: PostInitialise() not being called on script engines (nasty one that)
...
cleanup: warnings, readability
2008-09-02 12:07:23 +00:00
a5e7807612
Y top shear accuracy improvements in circular path prim meshes
2008-09-02 01:54:08 +00:00
f4035840d2
compensates profile placement effects of Y hole size on X top shear for circular path prim meshes
2008-09-01 08:19:47 +00:00
9cf9c08696
Improvement in mesh accuracy in X Top Shear parameter for circular path prims
2008-09-01 06:00:07 +00:00
49ec6dd882
* squash some obvious warnings
...
* a couple more remain that preferably the original coders should look at in more detail (obsolete warnings in the ogp module and not overriding warnings in the script
engine)
2008-08-30 18:09:38 +00:00
35ad484b6b
fixed some ugliness in the conversion from the new mesher format to the old that should speed up region startup a little and maybe even use less memory if the GC decides to play friendly with the other kids.
2008-08-29 08:19:47 +00:00
3bf8858727
Update svn properties, formatting cleanup.
2008-08-28 14:41:54 +00:00
49f9bd8b68
Added some exceptions for bad profile cut parameters
2008-08-28 06:41:32 +00:00
1a83384f90
re-enable new PrimMesher module for mesh creation for standard (non-flexy) prims.
2008-08-27 23:43:53 +00:00
e593a333c7
adds releaseSourceMeshData() method to IMesh and Mesh for freeing mesh data after conversion to pinned lists.
2008-08-27 23:37:14 +00:00
36d1720fde
reverting to prior meshing methods until some physics timing issues can be resolved
2008-08-27 09:49:13 +00:00
65c82c2494
Added some exception trapping to PrimMesher
2008-08-27 08:03:52 +00:00
cf951d4d04
Added some exception handling to help catch some possibly corrupt prims
2008-08-27 07:30:14 +00:00
3481a977f0
Meshmerizer now uses new PrimMesher class for meshing all standard (non-sculpty) prims. This should result in more accurate meshes, lower memory consumption, and eliminate several lockup modes.
2008-08-27 06:53:09 +00:00
8be249bc68
Completion of new PrimMesher class
2008-08-27 06:39:39 +00:00
fce83731ad
Modified Mesh object to allow alternative mesher interfacing
2008-08-27 06:29:34 +00:00
29407a43f5
more progress on new meshing routines
2008-08-24 01:23:04 +00:00
72f74acdbf
more work on new meshing routines...
2008-08-23 10:28:35 +00:00
df14889635
some initial work on new prim meshing routines (incomplete)
2008-08-23 08:33:00 +00:00
0f6b899ec7
Cleaned up some warnings
2008-08-22 07:25:53 +00:00
261876fd47
Commented out the float array "normals" in the Mesh object and all references to save memory as it was unused
2008-08-22 07:06:33 +00:00
6ef9d4da90
Formatting cleanup.
2008-08-18 00:39:10 +00:00
1bf60fa1ac
updated some prim parameters to project maintained versions
2008-08-14 08:59:13 +00:00
Dahlia Trimble