With some support from HomerH, this patch adds support for Wind
Model plugins via the mono.Addin framework.
* Adds console & OSSL access to Wind Parameters
* Adds plug-in support for custom wind models
* Provides two example Wind Model plug-ins
Documentation for the wind module is temporarily located at http://code.google.com/p/flotsam/wiki/CoreWindModule [^]
-- will move this documentation to http://opensimulator.org [^]
after the patch has been committed.
* Important: HttpServer.dll was changed to HttpServer_OpenSim.dll so that the HttpServer references do not conflict if you've copied the OpenMetaverse.Http.dll and requirements to the OpenSimulator bin folder.
This means that if you reference HttpServer.dll in any projects, you will need to change the reference to HttpServer_OpenSim.dll. It still uses the Same HttpServer namespace though.
Attached is a patch which enabled through an OpenSim.ini option the ability
to read long notecard lines. Currently although the data is read from
the notecard it is truncated at 255 characters (same as for the LL servers.
This patch allows the setting of that limit to a different value.
; Maximum length of notecard line read
; Increasing this to large values potentially opens
; up the system to malicious scripters
; NotecardLineReadCharsMax = 255
this allows for save/restore functionality using notecards without
having to worry about very short line length limits.
* In most cases, the setting in OpenSim.ini.example is taken as the canonical one since this is the file virtually everyone ends up using
* OpenSim will start up with a blank OpenSim.ini, in which case sqlite is the default database (as before)
* Updated code to compile against MXP 0.4 version.
* Cleaned up field naming conventions.
* Added support for logging in with region name.
* Filled in new fields of JoinResponseMEssage.
* Added support for SynchronizationBeginEvent and SynchronizationEndEvent.
* Commented out periodic debug log.
* Added networking startup log messages.
This closes mantis #3277
* Updated MXP to contain extension fragment with prims and updated MXPClientView to fill in the parameters.
* Added google protobuffers dll.
* Update MXP dll.
* Updated MXPClientView to send prim parameters as Perception event extension
* Started OpenSim and connected with IdealistViewer via MXP and ensured from log that parameters are being sent.
* Ensured that nant test target runs succesfully.
This closes mantis #3229. Thanks, tlaukkan!
* Handled via the MXPModule.cs located in OpenSim.Client.MXP namespace.
* Also implements MXPClientView and MXPPacketServer for IClientAPI compatibility.
* No changes were required to Core to implement this - the thing is self contained in OpenSim.Client.MXP.dll.
* Includes reference implementation of MXP as MXP.dll - this is under the Apache 2.0 license.
* Requires OpenSim.ini setting to enable. "[MXP] \n Enabled=true \n Port=1253"
* May break. Highly untested.
The built-in default is OpenSim, unless a user server url is given, then
that is used, unless "shard" is also goven, then shard takes precedence.
The defult in OpenSim.ini is "OpenSim" for compatibility.
* Something that thus needs fixing is the fact that ProjectReferences has to be marked
<ProjectReference>
<Private>False</Private>
</ProjectReference>
but that is not configurable in the upstream Xml Schema. I've hardcoded it in our repo for now.
* Applied upstreams changes to allow for auditing and debugging in our various environments.
* This should, in theory, bring back 'multiple ref dirs'.
* Temporarily Removed xmlns because prebuild-1.7 schema does not allow for multiple solutions per prebuild node (This will be a moot issue once the Prebuild node is moved out of prebuild.xml)
* Autotools target: Various minor fixes
* MonoDevelop Target : No changes.
* Nant Target: Various minor fixes, support for net-3.5 and mono-2.0/3.5 targets
* Sharpdevelop targets: No changes.
* VS Targets: Refactored into using VSGenericTarget, and supports 2.0-3.5
* XCode Target: No changes.
--- Regressions and outstanding issues ---
* The Solution is assigned a random Guid - will lead to unnecessary reloads and loss of user settings.
--- New features of Prebuild 2.0.4 ---
* (Better) support for Web, WinForms and Database Projects and build actions
* Conditional Framework Version compilation support (1.1, 2.0-3.5)
* ArrayList -> List<>, ICollection -> IList
(this means Prebuild can generate 1.1 solutions, but can't itself be built under 1.1 - how very meta)
* Added <?include file="sub_prebuild.xml" ?> preprocessor directive.
I've changed the extension point name, and the internal references that
used the same string. I also fixed up the messaging around the asset
loader so that it is more explicit.
The change makes two principal implementation changes:
[1] It removes the hard coded set of possible asset server client
implementations, allowing any arbitrary implementation that has been
identified to the PluginLoader as an appropriate extension. The
extension point for asset server client extension
is /OpenSim/AssetServerClient. All of the old configuration rules have
been preserved, and any of the legacy configuration values will still
work as they did before, except the implementation is now loaded as a
plug-in, rather than as a hard-coded instantiation of a specific class.
The re-hashing of IAssetServer as an extension of IPlugin made upgrading
of the implementation classes a necessity.
Caveat: I have not been able to meaningfully test the crypto-grid
clients. I believe they should work correctly, but the refactoring
necessary to handle plug-in based initialization (vs constructor-based
initialisation) admits the possibility of a problem.
[2] The asset cache implementation, previously introduce as a hard-code
class instantiation is now implemented as an IPlugin. Once again the
previous (configurationless) behavior has been preserved. But now it is
possible for those interested in experimenting with cache technologies
to do so simply by introducing a new extension for the asset cache
extension point (/OpenSim/AssetCache).
I've tested all of the configuration settings, after applying the patch
to a newly extracted tree, and they seem to work OK.
AssetInventoryServer with the standard OpenSim license header
- add note about Cable Beach to CONTRIBUTORS.txt
- clean up AssetInventoryServer.ini.example
This changeset add the RegionReady module code. The module sends a
message on a configurable channel when an oar file has finished
loading or if the script engine has emptied its queue for the first
time (eg server startup). Config is something like this:
[RegionReady]
enabled = true
channel_notify = -800
The module also knows if there was an error with startup.
* This adds more explanation for the new proxy settings in OpenSim.ini.example
* Also does some formatting correction
* I did some additional reformatting on top of that
* This option makes OpenSim use the usual db based asset service in standalone, and the grid based one in grid mode
* The other options can (local, grid, etc) can still be used explicitly as before
* Also change OpenSim.ini.example and the surrounding explanative text
* Adding an option to use the tree module to manage the trees in the simulator (grow/reproduce/die)
* Setting it to off by default in an effort to reduce the number of threads in use by default
* You can also turn it on in a 'one off' way with 'tree active true' on the console. To 'one off' turn it off, it's 'tree active false'. The permanent way to do that, however is in the opensim.ini.
* Added Npgsql.dll and Mono.Security.dll which are NpgsqlDriver dlls.
* Added missing field to schema creation scripts: PathTaperY.
* Added schema creation scripts for PostgreSQL.
* Added unit test classes for PostgreSQL.
* Added schema creation script folder to NHibernate project in prebuild.xml
* Added Npgsql.dll to NHibernate test project dependencies in prebuild.xml
* Ensured that build works with both nant and Visual Studio.
* Executed build unit tests with nant and NHibernate unit tests with NUnitGUI
- Couple of region tests fail due to double precission float rounding errors need to sort out how these are handles in unit tests and if higher precission numeric field needs to be used in Postgresql.
* Adds a prototype web stats module which is disabled by default. It's functional with one report right now, however, the database structure may change, so I don't recommend enabling this to keep actual stats right now. I'll let you know when it's safe.
* Adds Prototype for ajaxy web content
* removed a warning or two.
- Adapted code to match the corrected signatures
- Fixes Mantis #2934. Hopefully.
Note: Physics on linked objects still don't work correctly:
It doesn't crash the region anymore, but the example object in
the mentioned mantis now falls through the ground.
* This allows configuration of the assetset and library control file paths to be other than ./inventory/Libraries.xml and ./assets/AssetSets.xml
* This is controlled via the LibrariesXMLFile and AssetSetsXMLFile configuration settings in [StandAlone] in OpenSim.ini (in standalone)
and via the user and asset config xml files for grid mode
* Thanks to SirKimba for the patch
Dahlia Trimble