The functionality is the same but this allow us to monitor such tasks via "show threads" and abort them for test purposes, etc.
Also extends thread names to provide more info (e.g. SendInitialDataToClient says what client the task is for).
Other parts of OpenSimulator are relying on SP.Velocity == 0 for vehicles.
So add and use SP.GetWorldVelocity() instead when we need vehicle velocity, along the same lines as existing SP.GetWorldRotation()
As per http://wiki.secondlife.com/wiki/LlSetStatus
Setting STATUS_BLOCK_GRAB_OBJECT prevents or allows move of a physical linkset by grab on any prim.
Setting STATUS_BLOCK_GRAB prevents or allows move of a physical linkset by grab on a particular prim.
Previously, setting STATUS_BLOCK_GRAB would prevent drag via all prims of the linkset.
This was previously effectively being done by XmlDocument in the multiple passes through the XML.
This change tells XmlReader to ignore whitespace. This also means changing arguments to use XmlReader instead of XmlTextReader (a descendent of XmlReader) directly.
XmlReader.Create() has been the recommend way to create XML readers since .NET 2.0 as per MS SDK and is the only way to specific ignore whitespace settings.
Reading large XML documents (e.g. complex attachments) is CPU expensive - this must be done as few times as possible (preferably just once).
Reading these documents into XmlDocument is also more resource intensive than using XmlTextReader, as per Microsoft's own publication "Improve .NET Application Performance and Scalability"
Optimization of other cases will follow if this change is successful.
This is to see if an inaccuracy in sleep times under load is responsible for increase in frame times even when there is spare time still available.
Can currently only be activated by setting "debug scene set update-on-timer true".
Can be switched between timer and thread with sleep updates whilst the scene is running.
However, many locks remain since they may effectively be providing transactionality in some operations (e.g. prim updates across multiple tables).
These are candidates for being replaced with proper database transactions, since this would not block unrelated operations (e.g. land save and object save)
or unrelated operations on the same tables (e.g. storage of one linkset whilst another is being removed).
In practice, any performance deg due to contention is probably rare and short lived as the major prim operations are performed in memory and only persisted some time afterwards.
These locks are not necessary since the connection is taken from the underlying mysql pool and not shared.
Such locking is already not done by some other parts of OpenSim.Data.MySQL.
Pointed out by arribasim-dev
Disabled by default. Currently can only be enabled with console "debug lludp oqre start" command, though this can be started and stopped whilst simulator is running.
When a connection requires packet queue refill processing (used to populate queues with entity updates, entity prop updates and image queue updates), this is done via Threadpool requests.
However, with a very high number of connections (e.g. 100 root + 300 child) a very large number of simultaneous requests may be causing performance issues.
This commit adds an experimental engine for processing these requests from a queue with a persistent thread instead.
Unlike inbound processing, there are no network requests in this processing that might hold the thread up for a long time.
Early implementation - currently only one thread which may (or may not) get overloaded with requests. Added for testing purposes.
Also closes behaviours on disconnect instead of interrupt, though this makes no practical difference.
If existing behaviour is None, other added behavious will not take affect until None is removed (as this is an infinite wait until interrupted).
If n > 1 for RootTerseUpdatePeriod only every n terse update is actually sent to observers on same region, unless velocity is effectively zero (to stop av drift).
If n > 1 for ChildTerseUpdatePeriod only every n terse update is sent to observers in other regions, unless velocity is effectively zero.
Defaults are same as before (all packets are sent).
Tradeoff is reduction of UDP traffic vs fidelity of observed av mvmt.
Increasing n > 1 leads to jerky observed mvmt immediateley for root, though not on child, where experimentally have gone to n = 4 before jerkiness is noticeable.
Rapid polls are more expensive than triggered events (several polls vs one trigger) and may be problematic on heavily loaded simulators where many threads are vying for processor time.
A triggered event is also slightly quicker as there is no maximum 200ms wait between polls.
This is already going to be correctly set by WaitForUpdateAgent() earlier on in that method, which is always called where a callback to the originating region is required.
This kind of polling is very expensive with many bots/polling threads and appears to be the primary cause of bot falloff from the client end at higher loads.
Where inbound packet threads can't run in time due to contention and simulator disconnect timeout occurs.
This adds the "show stats", "stats record", etc. commands and information on available Threadpool threads, etc.
It also adds the Watchdog which logs warnings if time between executions is unexpectedly large.
This is to avoid issues where many bots connect to a single end point with multiple regions, where each region requires a long-lived poll connection for each bot.
This lock serialized all requests and made the inventory throttling in WebFetch redundant.
By moving this lock, two simultaneous requests may now take place which may help with http://opensimulator.org/mantis/view.php?id=7054
Move the experimental extra features functionality into the GridService. This sends default values for map, search and destination guide, plus ExportSupported control to the region on startup. Please watch http://opensimulator.org/wiki/SimulatorFeatures_Extras for changes and documentation.
These govern when AgentUpdates are sent to observers on position, rotation and velocity changes to an avatar (including the avatar themselves).
Higher values reduce AgentUpdate traffic but at a certain level will degrade smoothness of avatar and perceived avatar movement.
This covers event queue setup messages and some outgoing messages (e.g. EnableSimulator)
In my experience these messages are only useful if you really know what they mean and you're looking for them
Otherwise, they're quite spammy.
Event queue DebugLevel 1 is enabled with the "debug eq 1" console command
On non-HG this is on the only recognized failure state so we can return more information in the error result.
On HG there are multiple failure states which would require more work to distinguish, so currently return the unsatisfying "Internal Error" like some other existing calls.
This may have been the trigger CheckSendingPatchesToClients() dictionary out of sync exceptions in today's load test.
Don't need to check ContainsKey() since Remove() returns false on a request to remove a key that it doesn't have
Allows experiments in manually reducing updates under heavy load.
Activated by "debug scene set client-upd-per" console command.
In a simple test, can send as few as every 4th update before observed movement starts becoming disturbingly rubber-banded.
Corresponds to ResendAppearnceUpdates setting in [Appearance] in OpenSim.ini
This was originally implemented to alleviate cloud appearance problems but could be too expensive with large numbers of avatars.
This governs when child agent position changes are sent to neighbouring regions.
Corresponding config parameter is ChildReprioritizationDistance in [InterestManagement] in OpenSim.ini
For test purposes.
This gives a count of all requests made to the remote inventory service.
This is finer grained than inventory.httpfetch.ProcessedFetchInventoryRequests since such a request can be comprised of many individual inv service calls.
In addition, this will count requests that don't go through the HTTP inventory fetch (e.g. HG, archiving, etc.)
A stop gap solution - a better one may be to improve stats display on simulator-side.
Caps information is still accessible via the "show caps stats by user" and "show caps stats by cap" commands
This is for testing purposes (chiefly http://opensimulator.org/mantis/view.php?id=7054) so many not be permanent
Setting this will change the xinventory request timeout from the simulator from the default 100 seconds
For each service endpoint (e.g. posts to the xinventory service), a stat is available which shows the number of requests received and moving average per second
The full name is "service.<http-method>:<path>.requests (e.g. service.POST:/xinventory.requests)
Fixes http://opensimulator.org/mantis/view.php?id=7280
It can't be done this way because the stats data needs to show up on the console at all log levels, not just debug.
But this means setting it to log at fatal, which is not appropriate for this stuff in the log.
I understand the desire but this has to be done some other way, perhaps by (yet another) config parameter.
Also, this was already being done with the ClientStatsReport but that also should be done in another way, I think.
This reverts commit 5d53412766.
I forgot that a null 'their version' would not be passed over the wire and ends up as an empty string instead (like older simulators).
So instead pass through the correct simulator protcol version instead (SIMULATOR/0.3) when querying from login or hg login.
Also removes a debug console write for agent limit accidentally left in for the same commit.
Relates to mantis 7276
Robert Adams