bc543c1797
Environment Module - allows Environment settings for Viewer3 warning: includes database region store migrations for mssql, mysql, sqlite
...
enable/disable this module:
Cap_EnvironmentSettings = "localhost" (for enable)
Cap_EnvironmentSettings = "" (for disable) at ClientStack.LindenCaps section (OpenSimDefaults.ini file)
or owerwrite in OpenSim.ini
mantis: http://opensimulator.org/mantis/view.php?id=5860
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2012-05-23 17:04:19 -04:00
ebd9d2618b
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.cs
OpenSim/Region/RegionCombinerModule/RegionCombinerModule.cs
2012-05-19 13:34:44 +01:00
9fa0577c7e
Enable FetchInventoryDescendents2 and FetchInventory2 caps by default. This appears to be required now for LL 3.3.1 to work properly.
...
Without this, LL 3.3.1 continually pushes LLInventoryModelFetchDescendentsResponder::error 499 to its log.
This cap will be ignored by older viewers - UDP inventory will work normally.
2012-05-19 00:00:52 +01:00
90305001de
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Framework/EntityTransfer/EntityTransferModule.cs
OpenSim/Region/Framework/Scenes/Scene.Inventory.cs
OpenSim/Region/Framework/Scenes/Scene.cs
2012-04-27 17:09:49 +01:00
a2d544c938
Add a configuration switch to turn on/off the use of the trash
...
folder when deleting objects from a scene. The use of the trash
folder causes assets to be created and stored everytime you delete
an object from the scene (slows down the delete and adds mostly useless
assets to your database).
Default is on (use the trash folder) which is the standard behavior.
2012-04-25 11:54:57 -07:00
fc9f244a7d
Merge branch 'master' into careminster
2012-04-18 00:28:33 +01:00
2d45ba47ac
add configuration for jsonstore module, disabled by default
2012-04-17 13:55:00 -07:00
4a67e8b98f
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Interfaces/IEstateModule.cs
2012-04-11 23:35:27 +01:00
2b339bfd97
Correct max_listeners_per_region in OpenSimDefaults.ini to max_listens_per_region
...
Value for this setting in OpenSimDefaults.ini (1000) is same as setting in code (1000) so this should have no effect
Thanks to Ovi Chris Rouly for pointing this out.
2012-04-10 17:22:02 +01:00
b18b1b1d70
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
2012-03-27 23:14:43 +01:00
7223b63563
User level based restrictions for HyperGrid teleports, asset uploads, group creations and getting contacted from other grids. Incoming HyperGrid teleports can also be restricted to local users.
2012-03-27 22:09:58 +02:00
6b5f3b49e7
Merge branch 'master' into careminster
2012-03-27 18:11:05 +01:00
84c9bd52d3
BulletSim: update BulletSim binaries and configuration fixing a crash which happens when there are more than a few hundred physical objects.
2012-03-26 13:48:15 -07:00
0bd0514e81
Merge branch 'master' into careminster
2012-03-26 16:47:02 +01:00
ff54b3c366
BulletSim: change default of shouldDisableContactPoolDynamicAllocation from False to True. It seems that collisions don't happen well when it is False (things fall through terrain).
2012-03-23 15:50:32 -07:00
142de1d02f
BulletSim: add a bunch of internal Bullet configuration parameters to OpenSimDefaults.ini and the code.
2012-03-23 13:15:23 -07:00
de24feb275
BulletSim: Add AvatarRestitution parameter. Centralize computation of buoyancy for flying. Tweek avatar default friction and resititution
2012-03-23 13:15:17 -07:00
b22d040169
BulletSim: add some new runtime setable parameters to match the dll.
2012-03-23 13:15:14 -07:00
9a67baae21
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.cs
2012-03-23 14:24:55 +00:00
e5b182fb41
Add information about SendPeriodicAppearanceUpdates to OpenSimDefaults.ini for now.
...
Default remains false.
2012-03-23 03:38:33 +00:00
9edf99703a
Merge commit 'df624c13c98b06d57311c1d93ecbd4790553f3b3' into careminster
2012-03-22 23:01:50 +00:00
25e5b6a76c
Added new simple_build_permissions config to the .ini and .example files.
2012-03-22 14:21:07 -07:00
45b588cf00
Revert "Simple build permissions feature. NOTE: EXPERIMENTAL, DISABLED BY DEFAULT. Turns out that this can't be expressed by cascading Permission modules, so I did it as per this patch."
...
This reverts commit 6146e7ef25
2012-03-22 20:10:38 +00:00
6146e7ef25
Simple build permissions feature. NOTE: EXPERIMENTAL, DISABLED BY DEFAULT. Turns out that this can't be expressed by cascading Permission modules, so I did it as per this patch.
2012-03-22 12:57:12 -07:00
c7e302864a
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/World/Estate/EstateManagementModule.cs
OpenSim/Region/Framework/Scenes/Scene.PacketHandlers.cs
OpenSim/Region/Framework/Scenes/Scene.cs
2012-03-18 20:44:56 +00:00
a2009ffe2e
Terrain: added [Terrain] section with an option to load an initial flat terrain. Default is still pinhead island. I much rather have a flat land in the beginning.
2012-03-16 13:08:05 -07:00
272ba5a741
Merge branch 'master' into careminster
2012-02-15 01:11:17 +00:00
33e66107be
Fix: Lightshare Module(Windlight)-Region settings are not applicable for database sqlite mantis: http://opensimulator.org/mantis/view.php?id=5888
2012-02-14 02:06:42 +00:00
f49897a419
Clamp ODE character velocity. Make ODE falling character 54m/s by default.
...
If velocity reaches 256 in any vector then bad things happen with ODE, so we now clamp this value.
In addition, a falling avatar is clamped by default at 54 m/s, which is the same as a falling skydiver.
This also appears to be the value used on the linden lab grid.
This should resolve http://opensimulator.org/mantis/view.php?id=5882
2012-02-11 02:28:40 +00:00
236e1c45f2
Merge branch 'master' into careminster
2012-02-07 23:30:48 +00:00
a4367e75d3
Set UseMeshiesPhysicsMesh = true in [Mesh] by default
...
This means that uploaded meshes will get a physics (collision) mesh if uploaded with that option via a viewer.
2012-02-07 23:15:23 +00:00
54fc78013d
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.cs
2012-02-05 20:58:04 +00:00
44badf452e
change NonPhysicalPrimMax to NonphysicalPrimMax to make this variable
...
work correctly, it was being ignored because of the case, this effects
OpenSim.ini.example and OpenSimDefaults.ini
2012-02-04 19:41:25 -07:00
9a86a713d3
Merge branch 'master' into careminster
2012-01-29 22:50:59 +00:00
e8b688b61f
Fix:Get embedded objects in notecard http://opensimulator.org/mantis/view.php?id=2607
...
Signed-off-by: nebadon <michael@osgrid.org>
2012-01-29 12:40:43 -07:00
4ce42762ee
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.Inventory.cs
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
2012-01-26 00:21:21 +00:00
e9de7e7107
Update BulletSim.dll with some interface changes and tuning (see opensim-libs). Change BSScene to use new interface.
2012-01-25 14:40:38 -08:00
9bab43b4d1
eliminate a few tabs from OpenSimDefaults.ini
2012-01-06 21:36:30 +00:00
5f682b51ec
Add disabled Cap_FetchInventory2 = "" reference to [ClientStack.LindenCaps] in line with all the other ones that are there
2012-01-06 21:29:18 +00:00
11c48ac807
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
OpenSim/Region/ScriptEngine/Shared/Tests/LSL_ApiTest.cs
2012-01-06 21:41:36 +00:00
eef6f92029
Merge branch 'master' into careminster
2011-12-22 19:52:59 +00:00
48113f0fc8
Make it possible to force all prims to be phantom via the collidable_prim boolean setting in the OpenSim.ini config [Startup] section.
...
Naturally, default is true.
When set to false, "phantom" flags on prims can be set as usual but all prims remain phantom.
This setting is for test purposes.
This switch does not affect the collision of avatars with the terrain.
2011-12-22 19:44:52 +00:00
f025387f10
Set adaptive throttles false by default because it doesn't play nice with AVN
...
code
2011-12-09 19:56:03 +01:00
dc612d0f08
Merge branch 'master' into bigmerge
...
Conflicts:
OpenSim/Region/Framework/Scenes/SceneObjectPartInventory.cs
2011-11-28 11:06:38 +00:00
676d32974a
Implement the FetchInventoryDescendents2 capability using the same code as WebFetchInventoryDescendents.
...
Enabling this by setting Cap_FetchInventoryDescendents2 = "localhost" in the [ClientStack.LindenCaps] section of OpenSim.ini downloads inventory via http rather than udp in later viewers.
2011-11-25 22:46:42 +00:00
b785f204ce
remove some mono compiler warnings
2011-11-25 22:19:57 +00:00
bdb5ac96d9
Merge branch 'master' into bigmerge
...
Conflicts:
OpenSim/Region/Framework/Scenes/SceneCommunicationService.cs
OpenSim/Region/ScriptEngine/XEngine/XEngine.cs
2011-11-19 22:39:15 +00:00
9d458fdd7f
Turn the [RegionReady] module on by default and login_disable = true while scripts are loading.
...
From field experience, we know that simulators can be unstable if a user logs in before the scripts have finished loading.
This commit turns login_disable = true in [RegionReady] on by default which prevents this from happening.
If you want the old behaviour, please copy these section from OpenSimDefaults.ini into OpenSim.ini and set login_disable = false
2011-11-18 21:31:23 +00:00
169387b390
Turn SellEnabled in the [EconomyModule] on by default.
...
This only provides enough functionality to allow operations for no money (e.g. sell for $0).
2011-11-17 23:53:25 +00:00
2d4ac6288d
Alter commit 3758306 to allow region name to be substituted within a region console prompt
...
This is to allow broader subsitution in the future. Currently, the only substitions are \R (for region name) and \\ (for a single backslash)
e.g. "Region (\R) " is the current and continuing default prompt
This renames custom_prompt in [Startup] to ConsolePrompt
2011-11-10 22:56:13 +00:00
4939d99b57
Merge branch 'master' into bigmerge
2011-11-10 23:03:50 +00:00
facdc9c46e
Merge branch 'master' into bigmerge
...
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.cs
OpenSim/Region/Framework/Scenes/ScenePresence.cs
2011-11-05 22:56:08 +00:00
4d3926694d
Remove enableprejump config option and associated code as this is now
...
fully functional and cannot be disabled because that would break timings.
2011-11-05 22:43:45 +00:00
24235006f4
Merge branch 'master' into bigmerge
...
Conflicts:
OpenSim/Region/CoreModules/Avatar/Chat/ChatModule.cs
OpenSim/Region/CoreModules/Avatar/Gods/GodsModule.cs
OpenSim/Region/CoreModules/LightShare/LightShareModule.cs
OpenSim/Region/CoreModules/World/Estate/EstateManagementModule.cs
2011-11-04 01:18:37 +00:00
59232a6ea8
Change default say distance to 20m from 30m, the same as on the big grid. This is to improve the migration of scripts that expect a 20m say distance.
...
If you want to keep a 30m say distance then please set this as the say_distance parameter in the [Chat] section of OpenSim.ini.
2011-11-02 20:05:31 +00:00
b69f679122
Merge branch 'master' into bigmerge
...
Conflicts:
OpenSim/Region/CoreModules/World/WorldMap/WorldMapModule.cs
2011-11-01 23:54:09 +00:00
4b58d4ff95
Removed see_into_this_sim_from_neighbor configuration option.
2011-11-01 16:51:14 -07:00
083b28de8c
Merge branch 'master' into bigmerge
...
Conflicts:
OpenSim/Region/Framework/Scenes/SceneObjectGroup.cs
2011-10-30 10:16:25 +00:00
9bdf118e0d
Add missing max_listens_per_region to [LL_Functions] config section in OpenSimDefaults.ini + explanation.
...
This setting controls the maximum number of listeners in a region
2011-10-29 02:45:50 +01:00
6a96c9546d
Merge branch 'master' into bigmerge
...
Conflicts:
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
2011-10-26 17:48:51 +01:00
41395d5443
Added optional owner classes to existing OSSL agent Permissions
...
PARCEL_GROUP, PARCEL_OWNER, ESTATE_MANAGER and REGION_OWNER can be combined with the existing agent uuid option to limit ossl functions to agents and owner classes.
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-10-26 10:35:50 -04:00
90f17785c3
Merge commit '352002fd0b74a87f62ea82c76969e4110ba2542f' into bigmerge
2011-10-25 02:54:53 +01:00
8841b77cd1
Merge commit '3843efe478ed682fd08bf12ea8bd7377c68a36fb' into bigmerge
2011-10-25 01:53:53 +01:00
2d4ba1a871
Merge commit '03102864f0d9851b6937ca5472f48f10ec861a26' into bigmerge
2011-10-25 01:52:00 +01:00
b4395143e7
Merge commit '4e7d4330c2b2c61e64c9f82efa7b824b717b2e4d' into bigmerge
...
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.cs
2011-10-25 01:50:07 +01:00
352002fd0b
Set enable_adaptive_throttles = true in OpenSimDefaults.ini
...
As discussed in http://lists.berlios.de/pipermail/opensim-dev/2011-October/010599.html and the preceeding thread mails,
the aim of this setting is to avoid overloading the viewer UDP connection where the client is failing to ack packets.
Please mantis any anomalous viewer connection behaviour which wasn't there before.
2011-10-17 22:11:56 +01:00
3843efe478
Restore [Startup] physical_prim flag which can stop any prims being subject to physics
...
This had stopped working. However, at the moment it still allows the physics flag to be set even though this has no effect. This needs to be fixed.
Default for this flag is true as previously.
2011-10-15 02:42:43 +01:00
03102864f0
change default ODE world_stepsize to 0.0178 from 0.02
...
This exactly fits five ODE steps in the default frame time (0.089).
This means that ODE execution time now matches the default minimum frame time.
This eliminates errors between distance travelled as calculated by ODE in clear air and simple extrapolation.
On the old values, ODE would actually do calculations over 0.1 seconds rather than 0.089.
This means that once the avatar is at top speed, no additional packets need to be sent for smooth movement, since no error develops between server and viewer.
This approach replaces the tweaks previously discussed on the opensim-dev mailing list
2011-10-14 21:11:00 +01:00
4e7d4330c2
Expose minimum frame time and update periods for experimentation.
...
Settings are at bottom of [Startup] in OpenSimDefaults.ini, override in OpenSim.ini to change
Defaults are the same as previously.
More information to come on opensim-dev shortly.
Feel free to tweak but if you do please don't expect any support unless feedback on certain tweaks is explicitly requested.
2011-10-13 23:47:37 +01:00
0faa8db0ef
Update OpenSimDefaults.ini to make the prior state (Groups messaging enabled
...
by default) the config default. This way it will work for current cases while
allowing the use of other groups modules without config bloat.
2011-10-12 09:23:57 +01:00
c9fae6f8a2
Disable Flotsam groups messaging module in our config base
2011-10-12 09:27:48 +02:00
8114f895c2
Provide a way to turn the MonitorModule on and off
...
Default is currently on since this is the historical setting
2011-10-10 22:17:29 +01:00
5551542c28
Improve explanation of access_ip_addresses in [RemoteAdmin] to say that there are no restrictions if not set
2011-10-08 01:39:27 +01:00
4073cd6ced
Add option to allow only explicitly listed IPs to access RemoteAdmin facilities.
...
Also adds password check to some functions where this was missing and fixes some parameter checking.
This is a patch from http://opensimulator.org/mantis/view.php?id=5715 with a few small unrelated spacing tweaks from me.
Thanks Michelle Argus.
2011-10-08 01:23:26 +01:00
f1986d54bb
Clarify explanation of DeleteScriptsOnStartup switch in [XEngine].
2011-10-04 22:48:28 +01:00
844b4f3a16
copy config information on allow/disallow individual os functions into OpenSim.ini.example
...
I this is generally useful rather than a 'default' setting
2011-09-30 23:55:02 +01:00
e742cffe15
Add Enabled switch in new [Attachments] section in OpenSimDefaults.ini to allow attachments to be temporarily turned off.
...
This is for debugging purposes. Defaults to Attachments Enabled
2011-09-30 01:19:22 +01:00
39d7945efc
Added a setting to [Startup] section of config that will allow the simulator to start up with no regions configured.
...
I added the boolean config setting "allow_regionless", defaulting to false. If set to true, opensim will start up ok if no region configurations are found in the specified region_info_source. It will not ask the user to create a region.
2011-09-24 01:59:02 +01:00
5364607005
Clarify explanation of the "DeleteScriptsOnStartup" config switch and add this to OpenSim.ini.example since it's very useful if you're not updating OpenSim from source.
...
On reflection, "DeleteScriptsOnStartup" isn't a great name since it suggests real script deletion rather than compiled versions.
2011-09-24 00:22:23 +01:00
b705ad477e
BulletSim: update values in OpenSimDefaults.ini to the same as defaults in the source.
2011-08-30 13:49:50 -07:00
21708b832b
BulletSim: add mesh representation. Use meshes for static objects and switch to hulls for physical objects.
2011-08-26 15:51:21 -07:00
384cb79a1a
Merge branch 'master' into bulletsim
...
Conflicts:
OpenSim/Region/Framework/Scenes/SceneManager.cs
2011-08-19 14:49:16 -07:00
e19843a0ee
WorldMap: Added map item for Land-for-Sale. Implemented backlist item timeouts (default 10 minutes; see also new config file setting BlacklistTimeout) and removing backlisted neigboring regions that have been restarted from the blacklist.
2011-08-14 17:45:23 +02:00
c3f579046c
Merge branch 'master' into bulletsim
2011-08-05 11:13:02 -07:00
7640b5abf6
BulletSim: Parameters settable from ini file. Linksets. Physical property value tuning
2011-08-05 11:01:27 -07:00
c1c0d780ee
correct config comments mistakes
2011-08-03 04:36:25 +01:00
797def8aa4
Put config to enable disable [NPC] module.
...
Default is disabled. You will need to explicitly enable to toy with this.
2011-08-03 04:33:45 +01:00
835352aee9
Make it clearer what the save_crashes setting in [Startup] actually does.
2011-07-30 01:05:30 +01:00
ea58aee338
Change default AllowScriptCrossings config setting to true.
...
When this setting is false and other defaults haven't been changed, scripts entering the simulator from another sim are automatically restarted but their state is not preserved.
When this setting is true, state that accompanies the script is reloaded (e.g. if a script had a variable i = 1 when leaving the source region, it will still have i = 1 on the destination region).
This setting does not affect crossings when regions are run in the same simulator. In this case, state is already preserved.
2011-07-23 02:31:00 +01:00
4eaca4884e
Fixed serverside_object_permission default value confliction
2011-07-23 02:26:13 +01:00
e1ce106790
make [SMTP] default comment option match actual default
2011-07-21 03:21:19 +01:00
0a09c45726
minor: group all the map tile options together
2011-07-21 03:18:10 +01:00
d2d67a1abf
remove pointless quotes from GenerateMaptiles option in OpenSimDefaults.ini
2011-07-21 03:14:43 +01:00
1c758ae01c
make default TextureOnMapTile true for the older map imager
...
Don't know of a good reason not to do this, seems to work fine.
2011-07-21 03:08:58 +01:00
a9b7487fcb
improve and tidy up some config file comments
2011-06-30 22:36:41 +01:00
698cd0b3c2
Remove the now unused [cms] section from OpenSimDefaults.ini
2011-06-25 01:33:09 +01:00
0dd3281caf
Optionally, don't delete previously compiled scripts on startup
2011-06-24 22:07:20 +01:00
de20f0603f
Tell hypergridders when their teleports fail because of the 4096 limit rather than just saying "destination not found"
...
Instead of performing the 4096 check when the region is linked (and subsequently removing the link), leave the link in place and perform the check in the entity transfer module
This allows us to explicitly tell the hypergridder why the teleport failed (region out of range).
It also allows people on regions that are within range (on a large source grid) to teleport.
The Check4096 config parameter in the [GridService] section is replaced by a max_distance paramter in a new [EntityTransfer] section in OpenSimDefaults.ini
Since the parameter is in OpenSimDefaults.ini no action needs to be taken unless you want to increase this limit. It could also be decreased.
The check is being made in the base entity transfer module, since I believe the viewer problem occurs both on extremely large grids and while hypergridding.
2011-06-24 19:49:05 +01:00
16fae059bb
Comment the alert_uri so it remains disabled until set
2011-05-28 16:40:05 -04:00
c7e18f9017
Adding an event to signal that logins are enabled
...
Added an event to signal the eabling of logins and added an alert to send to a configured service.
2011-05-28 16:20:10 -04:00
99f42c0a6e
Add option to disable logins
...
This just covers script loading for now. More to come.
2011-05-28 00:35:06 -04:00
7c3e8a106b
Merge branch 'master' of https://github.com/allquixotic/opensim-autobackup
2011-05-06 20:51:55 +01:00
8ca7938753
Adding ssl support
...
Adding ssl support for "Out of Band" applications such as the remote
admin module or Robust services
2011-05-05 19:56:54 -04:00
98b84802e4
Changed the defaults, so that it behaves exactly is it has been behaving (no WebFetch cap by default).
2011-05-02 20:19:36 -07:00
fffd42f5cb
Merge git://opensimulator.org/git/opensim
2011-05-02 02:23:18 -04:00
f10666c7ba
How this might look like from a configuration perspective. Changes OpenSimDefaults.ini.
2011-05-01 10:07:54 -07:00
024c12abc3
Cleaned up various configuration options. Removed the category throttle
...
limits because the only ones used now are the defaults (which are overwritten
by the client throttles anyway). Updated the default rates to correspond to
about 350kbps.
Also added a configuration to disable adaptive throttle. The default
is the previous behavior (no adaptation).
2011-04-25 10:44:41 -07:00
d287e0ac68
Merge git://opensimulator.org/git/opensim
2011-04-23 18:33:08 -04:00
082fad6dd2
Fix most issues raised by justincc: http://opensimulator.org/mantis/view.php?id=5440
2011-04-23 18:29:13 -04:00
e0002f6b64
some mesh config asthetics
2011-04-21 19:04:41 -04:00
d9055c8dc3
Group collada meshies settings under [Mesh] in OpensimDefaults.ini
2011-04-21 15:15:24 -04:00
36c4e94ef7
Move mesh on/off swtich from [Startup] to [Mesh] in anticipation of future config parameters.
...
Default remains true.
OpenSimDefault.ini changed so if you haven't overriden this switch then you don't need to do anything.
2011-04-18 23:22:04 +01:00
419fc9427e
Provide a configuration setting to control whether multiple taken objects are coalesced to inventory
...
This is the CoalesceMultipleObjectsToInventory setting in [Inventory] in OpenSimDefaults.ini
Default is true.
2011-04-18 20:03:53 +01:00
40bf417da7
Add ColladaMesh switch
2011-04-14 21:15:42 -04:00
424995e138
Move example HttpProxy setting to OpenSim.ini.example and tidy
2011-04-12 23:22:21 +01:00
fda393b088
Add information comment to top of OpenSimDefaults.ini and make file consistent
2011-04-11 21:42:28 +01:00
5a16fa882c
Parameterizes the view distance used to compute and manage
...
child agents in neighbor regions. This means you can extend
the view on a simulator beyond the default 3x3 regions.
This uses a region default draw distance and should be
replaced at some point by the avatar specified draw distance.
That will require more careful, dynamic recomputation of child
agents every time the draw distance changes.
WARNING: this is experimental and has known instabilities. specifically
all regions "within site" should be running the same default draw distance
or agents will not be closed correctly.
2011-02-22 13:23:54 -08:00
810f4b9835
Add groups cache timeout setting for Flotsam Groups back to OpenSimDefaults.ini
2011-01-28 22:07:35 +00:00
df7fb207a8
Moved the map tile processing used by the Simian Grid
...
Frontend into a separate region module. Configuration
settings added to the defaults ini file. Others may find
this useful for pushing map tiles to a separate server.
2011-01-08 13:33:07 -08:00
5782f5662b
remove now unused subversion serialization backup config
2010-12-17 23:06:55 +00:00
19f70b93a0
tidy up the [Groups] section in OpenSim.ini.example
2010-12-17 21:19:57 +00:00
8ea4933742
Fixed wrong configuration variable names.
2010-12-11 18:17:07 -08:00
c0d3ab59e6
Remove old Freeswitch configurations
2010-12-07 15:30:10 +00:00
e76980bc49
Fix config items. Less used / expert items go in OpenSimDefaults.ini
...
The default shown is always the hardcoded default
2010-11-03 01:12:52 +00:00
343c894658
Set async_packet_handling = true by default
...
Setting this to true avoids a 500ms or so client freeze when the LLUDP server thread is taken up with processing a UseCircuitCode packet synchronously.
Extensive testing on Wright Plaza appeared to show no bad effects and this seems to reduce login lag considerably.
Of course, a lot of login lag is still coming from other sources.
2010-10-30 01:35:12 +01:00
68666efd25
Configuration of persistent baked textures and save/send delays.
2010-10-28 12:00:04 -07:00
7fa3335fd5
initial support for meshies physics. Must set ini option UseMeshiesPhysicsMesh = true to enable. See file OpenSimDefaults.ini for example.
2010-10-18 04:17:36 -07:00
b4c718f93b
Remove carriage returns from OpenSimDefaults.ini. Correct one typo. Change
...
.ini.example ";;" format to normal ini format, since the defaults file
is not parsed that way.
2010-10-13 17:07:13 +01:00
0d9c94033d
move CacheSculptMaps ini flag to OpenSimDefaults.ini
...
comment it and change defailt to true to reflect code
2010-10-07 19:48:17 -07:00
14db53b723
Another typo fix
2010-09-26 18:35:15 +01:00
b0b4782a2b
adding configurable j2kDecodeCache path
...
allowing the decoded sculpt map cache path to be defined in
the configuration files.
Use DecodedSculpMapPath in the [Startup] section to set
the path. The default is still ./bin/j2kDecodeCache
2010-09-26 17:04:11 +01:00
8afa21cef0
Some cleanup to OpenSimDefaults.ini
...
Fixing a couple of errors
2010-09-26 17:00:56 +01:00
51e03617e9
Changes to preceding patch to make it conform to inifile formats. BLANK LINE
...
before each comment/option group, and DOUBLE SEMICOLONS before pure text
comments in OpenSim.ini.exemaple
2010-09-26 02:31:37 +01:00
4f25b73b57
Add configurable path to script engine assemblies
...
Adding ability to place script engine assemblies outside
the codebase directories.
Uses new [XEngine] option: ScriptEnginesPath = "path_to_assemblies"
Signed-off-by: Melanie <melanie@t-data.com>
2010-09-26 02:30:46 +01:00
f5e3d5a33a
Add the modules include line back that i dropped by mistake
2010-09-15 23:24:58 +01:00
c1ccfa6d8d
Mark up OpenSim.ini.example for use with an automatic configuration tool.
...
Remove seldom changed options from OpenSim.ini.example.
Remove non-overridable settings like [Architecture] from OpenSimDefaults.ini
2010-09-15 20:29:28 +01:00
5d48e3c0bb
Revert "Move OpenSimDefaults,ini into config-include in order to put it with all the other default files"
...
This reverts commit c3259e9c26
2010-09-14 03:30:07 +01:00
c3259e9c26
Move OpenSimDefaults,ini into config-include in order to put it with all the other default files
2010-09-14 01:38:53 +01:00
1654e27cda
Renamed OpenSimDefaults.ini.example to OpenSimDefaults.ini
2010-09-13 16:23:22 -07:00
PixelTomsen