56ec177b3b
minor: Add commented out log lines to ScenePresenceAnimator for future debug use (such as logging anim pack contents sent to clients)
2012-12-14 23:42:23 +00:00
2816551215
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-12-14 23:29:33 +00:00
750ad2d3af
Fix issue where calling llVolumeDetect(FALSE) would not remove phantom flag, causing subsequent issues if physics was re-enabled.
...
Added regression tests
Addresses http://opensimulator.org/mantis/view.php?id=6365
2012-12-14 22:15:40 +00:00
664dad53dd
BulletSim: Add more to the TODO list. Clean up and improve some comments.
2012-12-13 23:08:01 -08:00
469c6c000a
Return the last set targetVelocity rather than the current velocity as the default action made available in PhysicsActor.TargetVelocity. Doesn't change any physics operation but makes DSG work better as the targetVelocity value does not keep moving around.
2012-12-13 16:32:25 -08:00
31d3952477
BulletSim: fix problem with continuious rebuilding of physical linksets. This caused movement problems and large prim vehicles to take up a LOT of simulation time.
2012-12-13 16:32:19 -08:00
60950bfab5
BulletSim: correct line endings in new BulletSimData.cs file.
2012-12-13 16:32:12 -08:00
3b2b785a46
BulletSim: Add 'BulletSimData' which separates structures created
...
for the operation of BulletSim and those defintiions/structures defined
so they can be used in the unmanaged world.
Consolidate setting of collision flags so implementation is not scattered.
2012-12-13 16:32:06 -08:00
9e0dd9952b
BulletSim: remove extra linkset rebuilds.
2012-12-13 16:32:00 -08:00
0b93a68030
minor: add some more detail to the logging if an LLClientView fails to process a packet
2012-12-13 23:32:28 +00:00
3c91d0e00d
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-12-13 23:21:52 +00:00
523213060b
Add WaitForEventCompletionOnScriptStop [XEngine] config param to OpenSimDefaults.ini to allow change of the wait time for an event to complete on script removal before aborting its thread
...
Default is 1000, as has previously been the case.
This parameter exists for further debug work concerning mono 2.10 crashes that may be related to locks not being removed on Thread.Abort
2012-12-13 23:21:25 +00:00
88b094cbf7
Simplify sit code a bit by determining correct animation in HandleSit instead of HandleSitRequest. This eliminates m_nextSitAnimation, an unneeded state-saving variable in ScenePresence
2012-12-13 13:05:28 -08:00
8e8da20af2
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-12-13 01:12:12 +00:00
6fca93f0b1
Fix sounds so that they play from inventory after teleport rather than only on initial login region.
...
Regression from commit ed162a10http://opensimulator.org/mantis/view.php?id=6453
Many thanks to danbanner for identifying the exact commit where this went wrong, which made identifying the fix easy.
2012-12-13 01:03:35 +00:00
e1814aa827
BulletSim: fix problem of avatar's floating off the ground after unsitting. Reworked size/scale logic so physical scale is kept in Bullet and physObject scale is the preferred size -- usually same as size but avatars are computed differently.
2012-12-12 16:51:43 -08:00
6f1f7f0206
BulletSim: non-functional commenting and reorganization of material attribute specifications.
2012-12-12 16:51:36 -08:00
7bb5613dc6
BulletSim: updates and rearrangement of the TODO list.
2012-12-12 16:51:29 -08:00
512e4c9313
Log situations where workitem event threads are aborted on stop request because they failed to complete event processing within the given timeout.
...
This is for bug hunting purposes where thread aborts may be causing dangling lock issues and subsequent vm crashes on mono (with ReaderWriterLockSlim, etc.)
2012-12-12 23:30:26 +00:00
047270bdc8
Add "debug script log" command to allow setting a numeric debug level on individual IScriptInstances for debugging purposes.
...
Current, state changes and event fires can be logged for individual scripts.
See command help for more details.
2012-12-12 23:13:34 +00:00
418c0cb01d
Add asset id to "show script" and "show scripts" command output to make it easier to extract and inspect the script's asset via "dump asset"
2012-12-12 22:06:09 +00:00
bb6eeb5429
BulletSim: do not return the current velocity for targetVelocity.
2012-12-12 11:01:36 -08:00
a082ce9da7
BulletSim: fix crash caused by the creation of a linkset child that is under the terrain. Users can sure find some interesting corner conditions.
2012-12-11 14:27:09 -08:00
d4e0e98c00
BulletSim: protect character property setting to remove crash from taints setting properties after the destroy character taint.
2012-12-11 13:54:26 -08:00
63099184db
BulletSim: protect prim property setting to remove crash from taints setting properties after the destroy object taint has happened.
2012-12-11 13:42:23 -08:00
905d7c43ad
BulletSim: modify LIMIT_MOTOR_UP to limit BOAT types to be at water rather than ground level. This makes boats float at water level better but not perfectly. There probably needs to be some interaction between HOVER and LIMIT_MOTOR_UP.
2012-12-11 00:35:16 -08:00
8b861e880a
BulletSim: add ini file and command line parameters to control
...
dumping of physical vehicle parameters (out of Bullet) on each
simulation step and to optionally scale vehicle angular velocity
by the time step. The latter looks to be part of a difference
between angular parameters for ODE and BulletSim. SL docs say
angular velocity is measured in radians/timeScale. Not sure if this
is different than what ODE does.
2012-12-11 00:13:13 -08:00
ebf30e7ba6
BulletSim: set mass for single prim linksets when going physical. This fixes single prim vehicles not working (the surf board now zooms).
2012-12-11 00:02:20 -08:00
93393fb975
BulletSim: comment out some chatty debug logging. Rearrange some code in BSDynamics to make velocity vs force calculation clearer.
2012-12-10 16:46:12 -08:00
9df85eadf4
BulletSim: Fix crash on the destruction of physical linksets.
...
While fixing the above, add methods to physical body and shape pointer
wrapper so routines won't have to know that IntPtr.Zero means no
physical instance.
Fix problem with physical linksets failing after a few sits and
unsits by properly restoring child prom positions for compound
linksets after multiple selection and deselections.
2012-12-10 15:35:53 -08:00
a19896cc56
BulletSim: some comments about rebuilding linksets (having to recompute and restore a child's position in the world based on its position in the moved linkset).
2012-12-09 22:32:46 -08:00
ce5083a504
BulletSim: adjust friction and restitution based on material type.
2012-12-09 22:32:46 -08:00
af8d53657d
HGAssetMapper: Get wasn't really working. It's true that some assets are copied in the process of being gathered their UUID, but not all. Specifically, terminal assets like textures aren't copied. We have to go one more time through the ids.
2012-12-09 22:05:12 -08:00
b8178f5a50
Switched the order by which foreign inventory and foreign assets are brought in, to avoid race conditions on the client.
2012-12-09 22:03:21 -08:00
cb80d8a29c
UserManagementModule: search the local cache for names too.
...
Inventory transfers: don't do async on asset transfers or now.
2012-12-09 15:31:11 -08:00
04e64d73df
BulletSim: set material properties for static objects. Move Linkset.MakeStatic() after call to ForceActivationState2() since linkset might change activation state. Make BSPrim.CreateGeomAndObject public as linkset rebuilding might need access to it. Only rebuild prim if selection state is actually changes -- OpenSimulator calls PhysObject.Selected() multiple times whenever a prim is selected or deselected.
2012-12-08 09:14:40 -08:00
216c121935
BulletSim: fix small problem with setting size/scale of native shapes which caused the native shapes to be rebuilt when not necessary.
2012-12-08 09:14:34 -08:00
addb791f3d
BulletSim: update comments and add more to TODO list.
2012-12-08 09:14:28 -08:00
63cff49bce
Re-enable code disabled in f605a62 to allow a TaskInventoryAccepted message to nominate a non-root destination folder.
...
This is in relation to http://opensimulator.org/mantis/view.php?id=6311
This is after further analysis which shows the viewer expects the server to move the folder for #RLV give but then should be renaming the folder itself.
For some reason this is not happening, possibly because we are not sending BulkUpdates or because we are not using transaction IDs properly.
This needs to be fixed in the future.
However, moving the folder even if the rename isn't correctly triggered in the viewer seems preferable to disabling this code altogether.
2012-12-08 01:29:58 +00:00
4e622f6816
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-12-07 00:53:47 +00:00
0568c76a88
Use a thread abort safe version of OpenMetaverse.DoubleDictionary with the aim of avoiding OpenSimulator problems due to script thread aborts.
...
When an object is removed, its scripts are stopped and then the thread running them is aborted if stop takes too long.
However, it appears that aborting a thread at just the wrong moment when it is obtaining a ReaderWriterLockSlim lock can leave this lock in an inconsistent state.
One symptom of this is that mono leaps to 100% cpu and a vm thread dump reveals lots of threads waiting for a ReaderWriterLockSlim lock without any thread actually holding it.
This is probably the same problem as encountered originally in commit 12cebb12
2012-12-07 00:47:04 +00:00
7fd8202ae3
BulletSim: rewrite and improve vehicle angularDeflection, verticalAttraction,
...
linearMotorUp and related vehicle forces.
Fixed problems with downward vehicle position correction forces being too large.
Add vehicle collision flag so can sense whether vehicle is on the ground.
2012-12-06 09:31:12 -08:00
edd1b353a5
BulletSim: update and add to the TODO list.
2012-12-06 09:31:05 -08:00
18fe35906d
BulletSim: add detail logging detail flag so I don't have to comment and uncomment the detail logging when changing the depth of logged info.
2012-12-06 09:30:57 -08:00
cc59e3cbdf
BulletSim: only check position sanity if the prim is physical -- the user can do anything dumb they wish.
2012-12-06 09:30:50 -08:00
2ecd8e6720
BulletSim: add values for material friction and restitution. Fix line endings in material definition file.
2012-12-06 09:30:42 -08:00
6d7f66f781
BulletSim: Don't add gravity to down force -- let Bullet do that. Add VehicleAddForce to set of managed vehicle prim properties.
2012-12-06 09:30:35 -08:00
e599a8b242
BulletSim: Vehicle angular vertical attraction works. Other vehicle angular forces commented out for the moment for debugging.
2012-12-06 09:30:28 -08:00
1c9ecc55d3
Instead of printing script errors out to console, put to debug log so that we also get timestamps.
...
This commit also adds script name, part name, uuid, etc. for later identification.
This information has been sent to console since 2009 but may be turned down if it proves too noisy.
However, I still currently need it to investigate some region problems probably triggered by scripting.
2012-12-06 00:22:52 +00:00
e60fe958df
minor: Fix more compiler warnings in CoreModules tests by properly overriding OpenSimTestCase.SetUp()
2012-12-05 23:44:12 +00:00
ec765de7e5
Add engine-wide events queued and events processed numbers to output of "xengine status" console command. For debugging purposes.
2012-12-05 23:41:50 +00:00
66982c8a59
Remove some mono warnings in script tests, chiefly where SetUp() wasn't properly calling to OpenSimTestCase.SetUp()
2012-12-05 23:36:15 +00:00
5ba99cbf55
Add IScriptInstance.EventsQueued to match EventsProcessed instead of asking callers to lock and directly inspect the EventQueue
2012-12-05 23:33:48 +00:00
652f4bcb42
For now, sort "show scripts" output in descending order sorted by events processed.
...
For debug purposes - should later add options to allow different sorting or show only highest 10, etc.
2012-12-05 23:27:50 +00:00
e8df0f1b4c
Add IScriptInstance.EventsProcessed stat so that we can record this information and display in "show scripts" for debug purposes
2012-12-05 22:33:46 +00:00
ea786414c2
In XEngine.DoOnRezScript() use Culture.SetCurrentCulture() instead of constructing a new CultureInfo separately
2012-12-05 21:51:08 +00:00
d97440c7cf
On XEngine.ProcessEventHandler(), instead of creating a new CultureInfo on every call use the single one set by Culture.SetCurrentCulture()
...
This is slightly different in that SetCurrentCulture() does not use overridden settings if the system culture matches en-US but some settings there have been changed.
This is what we want - we do not want to use any system overriden settings.
2012-12-05 21:40:28 +00:00
1b5f21f761
minor: also comment out the debug log message which reports searching for child agents in simulator scenes for now.
2012-12-04 23:07:26 +00:00
0d4047e641
minor: Comment out "Delivering IM to..." messages for now.
2012-12-04 23:06:02 +00:00
fb26d32a5c
minor: Put Scene.PhysicsRequestAsset() into standard C# xml format.
2012-12-04 22:33:25 +00:00
583e44103c
Bug fix in OfflineMessageModule. Mantis #6446
2012-12-04 08:36:54 -08:00
0c7d6adef1
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-12-03 20:17:00 -05:00
ac65085cc3
XmlRpcGridRouter
...
Flesh out XmlRpcGridRouter to reap unused channels from gateway when scripts or objects are removed, or when the llCloseRemoteDataChannel is called.
See: http://http://forge.opensimulator.org/gf/project/xmlrpcrouter/ or
https://github.com/BlueWall/XmlRpcRouter
for php gateway and test code.
2012-12-03 20:16:44 -05:00
787636b97a
BulletSim: Reduce idle region physics overhead where there are MANY
...
static objects by more restrictive selection of objects that collide
with static objects.
Rename collision mask fuctions from 'filter' to 'group' so it is clear
what is being set.
Rename BulletSimAPI.SetCollisionFilterMask() to SetCollisionGroupMask to match above.
Restore passing of time step to linear and angular motion component routines.
Use buffering vehicle physical parameter get/set routines consistantly.
Make range enforcement clearer by using ClampInRange() function for parameter setting.
Remove commented out experimental vehicle calculations.
2012-12-03 16:25:51 -08:00
41f1c5b7f7
BulletSim: rework angular corrections to remove any hybrid code and compute absolute collections.
2012-12-03 07:59:56 -08:00
2586bab2dd
BulletSim: add stubs for generalization of preStep actions. Will eventually replace the specialized vehicle processing with preStep event processing. Add TODO comments about this feature. Redo line endings in TODO file to be all Linux.
2012-12-03 07:59:52 -08:00
dc0497c1b8
BulletSim: begin tracking a TODO list. There just are so many things to remember to do.
2012-12-03 07:59:49 -08:00
10fcc70b36
BulletSim: revert angular vertical attraction from motor to code. The motor code did not return the restoring difference but the current value. Remove unused commented out code.
2012-12-03 07:59:46 -08:00
f9fed421fe
BulletSim: format vehicle detail logging messages so vehicle changs are grouped better in the log output.
2012-12-03 07:59:42 -08:00
20c3ec7d92
BulletSim: localize vehicle property setting so the vehicle prim is only updated at the end of the vehicle simulation step and the push of the physics property update event only happens if the properties are actually changed.
2012-12-03 07:59:39 -08:00
b124aae05e
BulletSim: Add DumpActivationInfo2 function. Change static objects from DISABLE_SIMULATION to ISLAND_SLEEPING. Update DLLs and SOs to add DumpActivationInfo2 function.
2012-12-01 15:39:13 -08:00
ec63e4ff29
BulletSim: remove time scaling of computed vehicle absolute velocity since Bullet will scale the movement by the time slice. Restore LIMIT_MOTOR_UP to definitition of BOAT simce some vehicle engines use it even for land vehicles. Push vehicle parameter updates through the regular property update to solve vehicles floating off when they should be stopped.
2012-11-29 22:21:45 -08:00
0bda35e18f
BulletSim: add copyright header where it is missing. Remove some unnecessary 'using' requirements so testing framework is less complicated.
2012-11-29 09:53:59 -08:00
0cd99c74a7
BulletSim: add expanded call to IMesher/Meshmerizer which enables/disables mesh caching. Since BulletSim caches and tracks the unmanaged memory version of meshes, the Meshmerizer itself does not need to cache built meshes once BulletSim has made the physical proxy mesh.
2012-11-29 09:24:53 -08:00
b8a7cbb9e9
BulletSim: reverse direction of hover correction. Removes problem with vehicles being orbited.
2012-11-29 08:03:30 -08:00
2ccd4c1302
BulletSim: fix boats floating low by removing LIMIT_MOTOR_UP flag from TYPE_BOAT definition.
2012-11-28 09:48:48 -08:00
0a66317fa6
BulletSim: move GetWaterLevelAtXYZ from BSScene to BSPhysTerrain.
2012-11-28 09:48:33 -08:00
d656ec8f33
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-11-27 21:11:19 -08:00
92a766e8cb
Bug fix in Offline IM for inventory transfers. The items were being placed twice in the receiver's inventory.
2012-11-27 21:10:58 -08:00
aae76f7be4
Stop logging spurious asset data for {0} is zero length error for sculpts/mesh
...
ODEPrim, for instance, always hits this code path twice at the moment
Firstly before any sculpt data has been loaded (hence the spurious message)
Secondly when any sculpt data has been loaded or failed to load (when the message would be valid).
Hence comment this out and rely on the message in ODEPrim.MeshAssetReceived() instead
(though this is not ideal since it requires all physics plugins to copy/paste similar code).
2012-11-28 02:01:04 +00:00
8a1d3b322f
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-11-28 02:00:34 +00:00
c17ea2049b
Show many more primitive properties on console command "show part name/id/pos"
2012-11-28 01:42:58 +00:00
a82f699f43
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-11-27 14:43:01 -08:00
2cd88787af
Prevent the core Groups module from being enabled when its name doesn't match the "default" ini choice
2012-11-27 14:42:28 -08:00
8e459a0346
BulletSim: reorganize linear movement routine into separate subroutines enabling external calibration routines and unit tests.
2012-11-27 10:04:00 -08:00
a5100cafee
BulletSim: fix terrain mesh generation for problem with regions that have unequal edge heights. Thanks UBit.
2012-11-27 10:03:55 -08:00
68fe7dff20
BulletSim: reorganize angular movement routine into separate subroutines enabling external calibration routines and unit testing.
2012-11-27 10:03:49 -08:00
59554758b1
BulletSim: implementation of vertical attraction motor.
2012-11-27 10:03:44 -08:00
9e0db36c82
BulletSim: add 'infinite' timescale that does not reduce motor target or friction.
2012-11-27 10:03:38 -08:00
5685b33071
BulletSim: increase vehicle stability by suppressing Bullet's update to angular velocity.
2012-11-26 10:47:34 -08:00
084e3926ca
BulletSim: use m_angularMotor to do the basic movement. Add the setting of same. Rename the angular forces and add comments to match MoveAngular to the form of MoveLinear.
2012-11-25 20:04:33 -08:00
d7126a14e1
BulletSim: up the vehicle angular damping to 0.95. Still trying to overcome the movement added by Bullet.
2012-11-25 20:04:33 -08:00
4c077a0694
BulletSim: organize MoveLinear code for understandability. Make LIMIT_MOTOR_UP contribution a velocity and not a force.
2012-11-25 20:04:32 -08:00
f977131fe0
BulletSim: add ToString override to BSVMotor.
2012-11-25 20:04:32 -08:00
319ec3235c
BulletSim: add BSVMotor as BSDynamics linear motor.
...
Properly limit *_MOTOR_DECAY_TIMESCALE to 120 as per specs.
Invode BSDynamics.Refresh() when vehicle type is changed. Previously
the vehicle properties weren't getting set because the physical
properties were set before the vehicle type was set.
Add a "use name" to BSMotors for identification while debugging.
Correct current and target confusion in BSVMotor design.
Rename CurrentValueReductionTimescale to FrictionTimescale.
Event more detailed logging.
2012-11-25 20:04:31 -08:00
980edabc2e
BulletSim: clean up TODO list. It is kept somewhere wlse that should be more public. Add error logging for the detail log writer so a message is output when it cannot write to the specified logging directory. Modify friction defaults to be closer to ODE's values. Add new collision margin and vehicle angular damping parameters.
2012-11-25 20:04:29 -08:00
9a42405944
BulletSim: small change to add position correction force with AddForce rather than just storing it in the variable
2012-11-25 20:04:28 -08:00
22d5bf8ff9
BulletSim: complete vector motor. Correct line endings.
2012-11-25 20:04:28 -08:00
d1480ac7ee
BulletSim: add terrain collision margin and vehicle angular damping
...
parameters to the parameter block.
New API call for setting collision margin.
2012-11-25 20:04:27 -08:00
c3f30fef96
BulletSim: add parameter for terrain collision margin.
...
Add locking around unlikely but possible race conditions on terrain list.
2012-11-25 20:04:27 -08:00
4ae30873ad
BulletSim: Add tables and initialization for different attributes for different materials. For the moment, the per material tables are not used.
2012-11-25 20:04:26 -08:00
02db8b9adb
Combine TestDeleteSceneObjectAsync() with TestDeRezSceneObject() as they are functionally identical.
...
Move TestDeleteSceneObjectAsync() and TestDeleteSceneObjectAsyncToUserInventory() from SceneObjectBasicTests -> SceneObjectDeRezTests
2012-11-24 03:49:23 +00:00
a4ce63d0cd
Fix regression TestDeleteSceneObjectAsyncToUserInventory by adding a BasicInventoryAccessModule() and re-enable in test suite.
2012-11-24 03:38:15 +00:00
22d4c52ffc
Consistenly make NUnit test cases inherit from OpenSimTestCase which automatically turns off any logging enabled between tests
2012-11-24 03:15:24 +00:00
e9be85442f
In ArchiverTests, use the local instantiated SceneManager rather than potentially cross-contaminating tests by relying on the static SceneManager.Instance
2012-11-24 02:57:43 +00:00
82690e1384
Fix bug where loading an OAR with a deeded parcel would always set the parcel owner ID to the estate owner even if the group UUID was present.
...
Aims to address http://opensimulator.org/mantis/view.php?id=6355
As part of this work, an incomplete IXGroupsData was added which currently only allows store/fetch/delete of group records
(i.e. no membership data etc)
This is subject to change and currently only an in-memory storage implementation exists for regression test purposes.
2012-11-24 02:43:31 +00:00
cda531bc3c
minor: Add some currently commented out debug log lines for investigating issues resolving group IDs for land parcels on OAR loading where groups do not exist
2012-11-23 05:44:31 +00:00
acc1810af2
minor: remove some mono compiler warnings
2012-11-23 04:08:17 +00:00
1f336579c8
minor: Make note in log if scene was restarted due to an unrecoverable physics error
2012-11-23 04:06:48 +00:00
f473252fa8
Add AllowRegionRestartFromClient setting to [EstateManagement] section of OpenSim.ini.
...
Setting this to false will block all restart requests from the viewer even if they are otherwise legitimate.
One use is to block region restarts if necessary whilst restart functionality remains buggy or triggers bugs in modules,
though these should be fixed as soon as practicable.
Default is true, as has been the case historically.
2012-11-23 03:56:53 +00:00
36c6edac69
Remove the redundant BypassPermissions() checks in EstateManagmentModule.
...
This is repeated in the PermissionsModule and checking it earlier does not allow a force override of the bypass value
2012-11-23 03:29:50 +00:00
9b60c14bb1
minor: Add some console feedback on region restart and log who requested a region restart if done from the viewer.
2012-11-23 03:05:30 +00:00
8c8c8a00a4
Fix problem where restarting the currently selected region would stop various console commands (e.g. "show users") from working.
...
This was because the "currently selected" scene reference was being left as the dead scene instead of the restarted Scene object.
2012-11-23 02:22:30 +00:00
049987925d
Add regression test for checking scene close when SceneManager is asked to close
2012-11-23 02:05:30 +00:00
61808d148e
Fix regression where we stopped closing scenes on simulator exit.
...
If we don't do this, then these scenes don't get deregistered from the grid, amongst other things.
Regression was introduced in commit 8c130bc
2012-11-23 01:01:39 +00:00
3b2caa63b0
Rename BulletSim's PhysicsShapeType to BSPhysicsShapeType because it
...
conflicts with PhysicsShape type defined in later libOMV
2012-11-22 14:45:41 +00:00
3ce00e97cc
Factor out command script code.
...
This also allows comments in command scripts (lines starting with ;, # or //) to be used across all servers
2012-11-22 05:57:20 +00:00
9fcf3f1a3f
Make "config show/set/get/save" console commands available on all servers
2012-11-22 05:48:41 +00:00
45d1e6ab09
Make "show info" command available across all servers
...
This helpfully lists version information, startup location and console log level
2012-11-22 04:45:53 +00:00
5c48d7a378
factor out common HandleShow code for "show uptime"
2012-11-22 04:05:09 +00:00
cbc7e7bf85
BulletSim: Make avatar capsule so it is not circular.
...
Simple attempt to make avatars better shaped.
Replace parameter 'avatarCapsuleRadius' with 'avatarCapsuleWidth'
and 'avatarCapsuleDepth'.
More tweeking to avatar height calculation. A little better but
short avatar's feet are above the terrain and tall avatar's feet
are a little below the ground.
2012-11-21 16:43:53 -08:00
4a0de01704
BulletSim: Properly position mesh terrain on creation (fixes terrain not appearing to be working). Centralize terrain shape creation logic. Remove very chatty detail log messages.
2012-11-21 16:43:45 -08:00
a59368c4a1
BulletSim: add terrainImplementation parameter with default to Mesh.
2012-11-21 16:43:37 -08:00
2dc7e9d3fa
BulletSim: fix line endings to be all Linux style (windows style keeps creeping in)
2012-11-21 16:43:29 -08:00
34cbc738a8
BulletSim: enablement and debugging of mesh terrain.
2012-11-21 16:43:21 -08:00
71b9640dfa
BulletSim: pull heightmap implementation out of the terrain manager so a mesh terrain can be implemented.
2012-11-21 16:43:14 -08:00
8dd5813889
BulletSim: rename SHAPE_AVATAR to SHAPE_CAPSULE with the eye to eventually having mesh avatars.
2012-11-21 16:43:06 -08:00
65e55ada87
BulletSim: uplevel FixedShapeKey out of ShapeData structure (since it is getting simplified out of existance someday) and update all the references to same.
2012-11-21 16:42:58 -08:00
d6db0d5740
BulletSim: uplevel PhysicsShapeType out of ShapeData structure (since it is getting simplified out of existance someday) and update all the references to that enum.
2012-11-21 16:42:50 -08:00
4d29488216
BulletSim: change PositionSanityCheck to apply a force to correct position corrections (below ground and floating).
2012-11-21 16:42:42 -08:00
2f5fe4b88e
BulletSim: tweek avatar capsule parameters so avatar feet don't go below ground. This solves the bouncing, short avatar problem (Mantis 6403).
2012-11-21 16:42:34 -08:00
f656adee31
If GetAgents() is called with an empty userIDs array then don't bother with a useless potentially network call on the scene presence service connector.
...
This also eliminates the "[PRESENCE HANDLER]: GetAgents called without required uuids argument"
which has started to pop up in the logs when a call is made with an empty uuid array as occasionally happens.
2012-11-20 10:22:49 +00:00
ea65a64f7b
refactor: Move common presence connector code into BasePresenceServiceConnector
2012-11-20 10:11:57 +00:00
597a101b9f
Minor formatting for 0962a35d and a few one-line comments as to why that code is there
2012-11-20 05:09:44 +00:00
0962a35d2f
Fix movetotarget on mega regions.
2012-11-20 04:54:13 +00:00
6c961d8add
BulletSim: Use base class constructors for initialization of BSShape and other classes.
2012-11-18 22:58:36 -08:00
22be36be69
BulletSim: fix the problem with flying being disabled when crossing region boundries.
2012-11-18 22:57:26 -08:00
079a1e704f
BulletSim: remove the obsolete interface to the Bullet code. Update BulletSim libraries with code stripped of the obsolete code.
2012-11-18 18:17:30 -08:00
392e84e554
Remove unnecessary ability to directly set InventoryItemBase.CreatorIdAsUuid
...
This was necessary historically but hasn't been for many years.
Can still get CreatorIdAsUuid, which is really just a UUID cached version of the string CreatorId
2012-11-17 01:23:29 +00:00
cd088757e9
Add a first draft mechanism for the IncomingPacketsProcessedStat to show the delta over time.
...
The chief motivation for this is to be able to tell whether there's any impact on incoming packet processing from enabling extra packet pooling.
2012-11-16 04:36:22 +00:00
daf03bfb56
Handle Map block requests on a separate thread rather than the main packet handling thread.
...
This prevents a slow grid information network call from holding up the main packet handling thread.
There's no obvious race condition reason for not doing this asynchronously.
2012-11-15 03:09:20 +00:00
57273ef7b2
Do HandleMapLayerRequest on its own thread rather than on the main inbound udp packet handling thread.
...
There's no obvious race condition reason for doing this on the main packet handling thread.
2012-11-15 03:07:45 +00:00
df4da51f04
Following on from 4f982596, launch map name requests on an async thread from LLClientView directly.
...
This releases the inbound packet handling thread marginally quicker and is more consistent with the other async packet handling
2012-11-15 03:04:46 +00:00
038528dc80
Make PacketPool class stats pull stats instead of push stats so they can be lifted up into LLUDPServer and be distiguished by scene name
2012-11-15 02:02:59 +00:00
2c36106675
Add IncomingPacketsProcessedCount stat for diagnostics.
...
Also puts some packet processing counts in a container named after the scene so that stats can be collected from more than one scene.
2012-11-15 01:14:18 +00:00
aeeaa3a0a9
Added AssemblyInfos to every dll in the OpenSim.Region namespace.
2012-11-14 11:09:43 -08:00
fcaddd901c
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-11-14 07:50:58 -08:00
c88e6fb445
Possibly fixes mantis #6429 (Flotsam cache having a null ref to the asset service)
2012-11-14 07:50:19 -08:00
2ccb53b42d
If no ISimulationDataStore or IEstateDataStore implementations could be loaded then halt with informative message rather than a later NRE.
...
Halt already occurs if the relevant config sections are not present.
So it also makes sense to halt if the implementations themselves cannot be loaded.
2012-11-14 04:17:39 +00:00
790b595aa0
Added a few more AssemblyInfos. (Plus added the one in OptionalModules, which had been forgotten.)
2012-11-13 19:50:19 -08:00
Justin Clark-Casey (justincc)