Justin, if you read this, there's a long story here. Some time ago you placed SendInitialDataToMe at the very beginning of client creation (in LLUDPServer). That is problematic, as we discovered relatively recently: on TPs, as soon as the client starts getting data from child agents, it starts requesting resources back *from the simulator where its root agent is*. We found this to be the problem behind meshes missing on HG TPs (because the viewer was requesting the meshes of the receiving sim from the departing grid). But this affects much more than meshes and HG TPs. It may also explain cloud avatars after a local TP: baked textures are only stored in the simulator, so if a child agent receives a UUID of a baked texture in the destination sim and requests that texture from the departing sim where the root agent is, it will fail to get that texture.
Bottom line: we need to delay sending the new simulator data to the viewer until we are absolutely sure that the viewer knows that its main agent is in a new sim. Hence, moving it to CompleteMovement.
Now I am trying to tune the initial rez delay that we all experience in the CC. I think that when I fixed the issue described above, I may have moved SendInitialDataToMe to much later than it should be, so now I'm moving to earlier in CompleteMovement.
reception thread to sleep for 30ms if the number of available user worker
threads got low. It doesn't look like any of the UDP packet types are
marked async so this check is 1) unnecessary and 2) really crazy since
it stops up the reception thread under heavy load without any indication.
This currently prints caps requests received and handled, so that overload of received compared to handled or deadlock can be detected.
This involves making BaseStreamHandler and BaseOutputStream record the ints, which means inheritors should subclass ProcessRequest() instead of Handle()
However, existing inheriting classes overriding Handle() will still work, albeit without stats recording.
"show caps" becomes "show caps list" to disambiguate between show caps commands
also moves the implementing code into LLUDPServer.cs along with other debug commands from OpenSim.cs
gets all debug lludp commands to only activate for the set scene if not root
hashes for the purpose of accurately responding to AgentTextureCached
packets. There is a change to IClientAPI to report the wearbles hashes
that come in through the SetAppearance packet. Added storage of the
texture hashes in the appearance. While these are added to the
Pack/Unpack (with support for missing values) routines (which means
Simian will store them properly), they are not currently persisted in
Robust.
packet can be pulled out of LLClientView and moved to
AvatarFactory. The first pass at reusing textures (turned off by
default) is included. When reusing textures, if the baked textures
from a previous login are still in the asset service (which generally
means that they are in the simulator's cache) then the avatar will not
need to rebake. This is both a performance improvement (specifically
that an avatars baked textures do not need to be sent to other users
who have the old textures cached) and a resource improvement (don't
have to deal with duplicate bakes in the asset service cache).
The previous wrong behavior caused the debug setting "UseHTTPInventory" to fail
on all viewers when turned off. UDB inventory would not be correctly used in
that case.
This was an undocumented interface which I think was for long defunct region load balancing experiments.
Also adds method doc for some IClientNetworkServer methods.
This tells the viewer to enable the UI for export permissions.
WARNING: If your inventory store contains invalid flags data, this will result
in items becoming exportable! Don't turn this on in production until it's complete!
with our own and add export permissions as well as a new definition for "All" as meaning "all conventional permissions" rather than "all possible permissions"
* Add zero length blocks to the new packet blocks to remain compatible with older viewers and avoid a NullRef when _packets_.cs calls the Length parameter.. which adds up the Length property all of the blocks.
Extend implementors of IStatsCollector to return an OSDMap of stats.
Update UserStatsCollector and AssetStatsCollector to return both
string and OSDMap data (as well as console format).
This is mostly Bluewall's work but I am also bumping the general version number
OpenSimulator 0.7.5 remains in the release candidate stage.
I'm doing this because master is significantly adding things that will not be in 0.7.5
This update should not cause issues with existing external binary DLLs because our DLLs do not have strong names
and so the exact version match requirement is not in force.
On Windows, concurrent multi-threaded processing of inbound UDP somehow allows different data input processing to interfere with each other.
Possibly the endpoint reference is being switched, though I don't yet know the mechanism. Not seen on Mono.
Also resolveable by setting RecyclePackets = false or RecycleBaseUDPPackets = false in [PacketPool]
Or async_packet_handling = false in [ClientStack.LindenUDP]
For now, will simply disable this particular pooling though will revisit this issue.
In response to http://opensimulator.org/mantis/view.php?id=6468
This prevents a slow grid information network call from holding up the main packet handling thread.
There's no obvious race condition reason for not doing this asynchronously.
This is to avoid the entire scene loop being held up when the group service is slow to respond.
There's no obvious reason for these queries to be sync rather than async.
Viewer 3 will discard such a message if the chat message owner does not match the avatar.
We were filling the ownerID with the primID, so this never matched, hence viewer 3 did not see any script error messages.
This commit fills the ownerID in with the prim ownerID so the script owner will receive script error messages.
This does not affect viewer 1 and associated viewers which continue to process script errors as normal.
This introduces a pull stat type in addition to the push stat type.
A pull stat takes a method on construction which knows how to update the stat on request.
In this way, special interfaces for pull stat collection are not necessary.
Even when an avatar is standing still, it's sending in a constant stream of AgentUpdate packets that the client creates new UDPPacketBuffer objects to handle.
This option pools those objects. This reduces memory churn.
Currently off by default. Works but the scope can be expanded.
This is controlled via the "debug lludp start <in|out|all>" and "debug lludp stop <in|out|all>" region console commands.
The command "debug lludp status" will show current status.
I think this is more useful right now since it tells us if the viewer requested a seed caps at all in various scenarios (such as when teleporting to a new region).
These were neither being returned or in many places reused.
Getting packets from a pool rather than deallocating and reallocating reduces memory churn which in turn reduces garbage collection time and frequency.
This allows different categories of stats to be shown, with options to list categories or show all stats.
Currently categories are scene and simulator and only a very few stats are currently registered via this mechanism.
This commit also adds percentage stats for packets and blocks reused from the packet pool.
The viewer would not see the folder move without this, either on accept or decline.
This commit also updates the TaskInventoryOffered message to better conform with the data LL uses
Changes are, agentID is prim owner rather than prim id, agent name is now simply object name rather than name with owner detail,
message is just folder name in single quotes, message is not timestamped.
However, folder is not renamed "still #RLV/~<name>". Long term solution is probably not to do these operations server-side.
Notes will be added to http://opensimulator.org/mantis/view.php?id=6311
This is to resolve previous build break.
This unnecessarily but harmlessly reads and sets the parameter multiple times - scene was doing the same thing.
This is to allow a second attempt to remove an avatar even if "show connections" shows them as already inactive (i.e. close has already been attempted once).
You should only attempt --force if a normal kick fails.
This is partly for diagnostics as we have seen some connections occasionally remain on lbsa plaza even if they are registered as inactive.
This is not a permanent solution and may not work anyway - the ultimate solution is to stop this problem from happening in the first place.
This aims to capture the amount of memory that OpenSim turns over whilst operating a region.
This memory is not lost - apart from leaks it is reclaimed by the garbage collector.
However, the more memory that gets turned over the more work the GC has to do to reclaim it.
Giving a large folder from one avatar to another was causing a long delay when handled synchronously, since it took some time to retrieve the necessary data from the inventory service.
Handling this asynchronously instead stops this delay from disrupting all avatars in the scene. This has been shown in OSGrid.
I see no reason for not handling all IM messages asynchronously, just as incoming chat is handled asynchronously, so this has been switched for all instant messages.
Thanks to Nebadon for testing this change out.
This may well come back in the future when this subinterface is actually used but it currently isn't and I feel the name was poor.
Everything uses IClientAPI.RemoveEndPoint which also returned the full endpoint rather than just the ip address.
Serialization of attachments requires IsAttachment = false so that correct positions are serialized instead of avatar position.
However, doing this when a hud is still attached allows race conditions with update threads, resulting in hud artifacts on other viewers.
This change sets SOG.IsDeleted before serialization changes take place (IsDeleted itself is not a serialized property).
LLClientView then screens out any deleted SOGs before sending updates to viewers.
If this happens, then the non-owners would see unremovable huds that they did not own until relog, and sometimes even beyond that.
This was due to a race between the entity update and the attachment code when moving an object from within scene to a hud.
IsActive is more appropriate since unack timeout is not due to voluntary logout.
This is in line with operations such as manual kick that do not set the IsLoggingOut flag.
It's also slightly better race-wise since it reduces the chance of this operation clashing with another reason for client deactivation (e.g. manual kick).
This is the same async behaviour as normal logouts.
This is necessary because the event queue will sleep the thread for 5 seconds on an ack timeout logout as the client isn't around to pick up the final event queue messages.
Instead of checking whether the client still exists by trying to retrieve again from the client manager, this patch gets it back from IncomingPacket and checks the IClientAPI.IsActive state.
This alarm can then invoke this to log extra information.
This is used in LLUDPServer to show which client was being processed when incoming and outgoing udp watchdog alarms are triggered.
The packet was actually being handled but not acted on.
This change extends the default timeout for paused clients to 5 minutes
and makes both the paused and non-paused timeout periods configurable.
This adds a non-advertised wait_for_callback option in [EntityTransfer]. Default is always true.
Teleport tests disable the wait for callback from the destination region in order to run within a single thread.
This involves a large amount of change in test scene setup code to allow test scenes to share shared modules
SetupScene is now an instance method that requires an instantiation of SceneHelpers, though other SceneHelpers methods are still static
May split these out into separate classes in the future.
This adds ScenePresence to IClientAPI.SceneAgent earlier on in the add client process so that its information is available to EventManager.OnNewClient() and OnClientLogin()
Also add a code comment as to why we're caching friend information for child agents.
We need to cache child agents so that friends object edit/delete permissions will work across boarders on regions hosted by different simulators.
This reverts commit d9f7b8549b.
This allows us to avoid unnecessary multiple calls to the friends service.
All friends functions originate from the root agent and only go to other root agents in existing code.
This also allows us to eliminate complex ref counting.
This lets us remove the dependency of OpenSim.Framework.dll on data/avataranimations.xml, which is not necessary for ROBUST.
This commit also takes care of the odd situation where animations are stored and used internally with uppercase names (e.g. "STAND")
but scripts refer to them with lowercase names (e.g. "sit").
Update() now accepts a frames parameter which can control the number of frames updated.
-1 will update until shutdown.
The watchdog updating moves above the maintc recalculation for any required sleep since it should be accounted for within the frame.
This is to deal with the hundred lines of command splurge when one previously typed "help"
Modelled somewhat on the mysql console
One can still type help <command> to get per command help at any point.
Categories capitalized to avoid conflict with the all-lowercase commands (except for commander system, as of yet).
Does not affect command parsing or any other aspects of the console apart from the help system.
Backwards compatible with existing modules.
On the first frame, all startup scene objects are added to the physics scene.
This can cause a considerable delay, so we don't start raising the alarm on scene loop timeouts until the second frame.
This commit also slightly changes the behaviour of timeout reporting.
Previously, a report was made for the very first timed out thread, ignoring all others until the next watchdog check.
Instead, we now report every timed out thread, though we still only do this once no matter how long the timeout.
Setting PermissionMask.All will cause next permissions to replace current permissions when the object is rezzed, since bit 4 will be set.
This is not correct behaviour for a freshly uploaded mesh. Freshly rezzed in-world prims also do not have bit 4 set (don't yet know exactly what this is).
Should resolve http://opensimulator.org/mantis/view.php?id=5651
Telehub settings now persist to the database and are saved across sim restarts. So-far this only works on MySQL. this is a work in progress, teleport routing is not yet implemented.
Support for viewer side of telehub management. Can manupulate Telehubs and SpawnPoints from the viewer estate managemnt tools. This is a work in progress and does not yet persist or affect teleport routing.
Not yet enabled by default. You can enable this by setting Cap_FetchInventory2 = "localhost" in the [ClientStack.LindenCaps] section of OpenSim.ini
Enabling both FetchInventory2 and FetchInventoryDescendents2 improves the situation with properly fetching attachments and hud objects
Probably because viewers are never expecting the odd situation where FetchInventoryDescendents2 is present but not FetchInventory2
However, for some reason attachments and hud objects occasionally fail to appear, though their status is correct in inventory
For attachments, focussing on the avatar makes them appear. Hud objects have to be reattached.
As far as I know, viewers don't use this mechanism to recieve new TextureEntry data for avatars. This is done via the AvatarAppearance packet instead.
Tested this back to viewer 1.23.
Replacing with Utils.EmptyBytes since converting the texture entry to bytes on each AvatarUpdate (or which there are many) is not cost-free.
Further filters "debug packet <level>" to exclused [Request]ObjectPropertiesFamily if level is below 25.
Adjust some method doc
Minor changes to some logging messages.
The caller is already an async thread from LLClientView so this doesn't hold up the client.
However, launching on a separate thread does remove the effect of m_setAppearanceLock
This was potentially allowing two different SetAppearance threads to interfere with each other, though this probably rarely happens, if at all.
The only caller is the LLUDP stack and this has to validate the UDP circuit itself, so we know that it exists.
This allows us to eliminate another null check elsewhere and simplifies the method contract
This means that avatar/appearance data of other avatars and scene objects for a client will be sent after the ack rather than possibly before.
This may stop some avatars appearing grey on login.
This introduces a new OpenSim.Framework.ISceneAgent to accompany the existing OpenSim.Framework.ISceneObject and ISceneEntity
This allows IClientAPI to handle this as it can't reference OpenSim.Region.Framework.Interfaces
This meant that if a user exited the region, the UploadTexture handler would be effectively removed for everyone, causing subsequent failures.
This hopefully resolves the recent UploadTexture LLSD problems
This was a regression in 5640f2e (Thu Dec 1 23:24:15 2011 +0000)
This is required for the substitution of different HTTP servers or the newer HttpServer.dll without having to commit to a particular implementation.
This is also required to write regression tests that involve the HTTP layer.
If you need to recompile, all you need to do is replace OSHttpRequest/OSHttpResponse references with IOSHttpRequest/IOSHttpResponse.
Enabling this by setting Cap_FetchInventoryDescendents2 = "localhost" in the [ClientStack.LindenCaps] section of OpenSim.ini downloads inventory via http rather than udp in later viewers.
Diva Canto