Check the client dialog box (from top menu) WORLD / REGION ESTATE
/ REGION tab. The client dialog box seems to have a hard limit of
about 32 characters per line available for displaying the region
version number. Our regions are sending a string which is greater
than the limit, causing the client to wrap the text and look ugly.
* Monitors / for getting the seed cap for rez_avatar/request on application/llsd+xml && application/xml+llsd && !application/xml
* Experimental, this might break LibOMV temporarily.
* There are still a lot of things that are hard coded to use http. They need to be fixed.
* Also includes directions
* A standard junk PEM file to append to app_settings/CA.pem in the client so SSL will work
* This is a HUGE OMG update and will definitely have unknown side effects.. so this is really only for the strong hearted at this point. Regular people should let the dust settle.
* This has been tested to work with most basic functions. However.. make sure you back up 'everything' before using this. It's that big!
* Essentially we're back at square 1 in the testing phase.. so lets identify things that broke.
* When OGP is active, disable SSL certificate chain validation. I'll add more options here to come, as well as a way to test against a group of known certificate subjects.
* There are a lot of changes and this is quite experimental. It's off by default, but you can turn it on by examining the bottom of the opensim.ini.example for the proper OpenSim.ini settings. Remember, you still need an agent domain..
* Furthermore, it isn't quite right when it comes to teleporting to remote regions (place_avatar)
This small patch provides the required changes to populate
the columns agentIP and agentPort in table "agents"
Tested with mysql (but should work for all supported db engines)
* The primary immediate use is to provide a means of temporarily reducing log output on the console when executing console commands
* Changing the log level on the console is not permanent and does not affect the log information being put into OpenSim.log
* This could have been done by putting in a threshold level on the Console appeneder in OpenSim.exe.config and implementing config watching in the code.
* But I think that it's a little more user friendly to make this doable via the console.
Binary distributions of OpenSim are not able to get the version info because they lack the ../.svn/entries file. This file exists in the ./bin./svn directory, which would be in a binary distribution. The included patch changes the path from ../.svn/entries to .svn/entries, which allows the version information to be show in "help/about"
* May resolves inventory problems that occur when the user moves between two regions`
* e.g. if the user moves to a second region, adds an inventory item, moves back to the original region then tries to manipulate that item
* Not yet implemented for teleport
NOTE: this code is work-in-progress, it's not live. it's so far
harmless and just wants to play. it should not bite anyone (yeah,
that's what they all say, i know...)
HTTP method matching support. adapting OSHttpXmlRpcHandler
accordingly. dropping OSHttpXmlProcessor delegate in favour of good
old XmlRpcMethodHandler delegate (was the same signature).
* This will work as long as those servers are actually registering any threads they use (does not include stuff plucked from the thread pool)
* command is now "show threads" rather than threads
The attached patch tries to read the SVN revision from local file
"svn_revision" before checking "../.svn/entries".
This allows simulators not running from the source tree to properly
display the SVN revision, if the installer generates the
"svn_revision" file.
* commented out [Obsolete(....)] attributes where no replacement feature
was available: if we want to attribute code that we think needs to be
reworked, we should define a new attribute and use that instead
(together with a little tool to retrieve all the attributed code then)
* commenting out unused variables
Currently module loading is done ad-hoc. I propose creating a simple
loader class that leverages Mono.Addins (and perhaps the new .NET
addins when they become available in mono). Attached is a basic
patch for review that compiles into HEAD, but doesn't yet replace
any existing ad-hoc loaders.
* Enables regular jpeg map images to be served directly from the region.
* EX: http://192.168.1.127:9000/index.php?method=regionImagecc4583cd269b41bfa525dd198e19a5c5
* This is actually HTTP server address + port + index.php?method=regionImage<REGIONUUID, no dashes>
* The Webmap image location gets printed on the console when the simulator starts up.
* JPEG data is cached so we only create the webjpeg once.
* Please feel free to comment if the periodic logging is causing you problems in some way - I'm loathe to add yet another switch to OpenSim.ini but will if it proves necessary
having reached the intermediate level of .NET's XmlSudoku, i've
now figured out how to do deserialization using different
XmlSerializers (this stuff begins to grow on me, sigh).
[still not used code, work-in-progress]
* adding convenience property on OSHttpRequest.cs (from awebb)
* User tries to log-in but is already logged in. Userserver will send message to simulator user was in to log the user out there.
* From the UserServer, admin types 'logoff-user firstname lastname message'.
* Some regions may not get the message because they're not updated yet.
i've added the OSHttpStatusCodes enumeration of HTTP status codes, have adapted
BaseHttpServer to use those.
then RestPlugin now has proper Failure handling returning proper HTTP status
codes. Regions/POSTHandler is work-in-progress.
provide OSHttpRequest and OSHttpResponse to our REST handler.
also, this adds proper RestPlugin.IsGod() checking against the X-OpenSim-Godkey
HTTP request header.
last, i added XML doc comments to RestPlugin.cs
the "if (request.UserAgent != null)" branch in the wrong place: as a result BaseHttpServer would not do
anything if the user agent header field was present....ARGH! BAAAAAAD.
Fixes a bug in BaseRequestHandler.
If the length of the patter is equal to, or greater than, the length of
the actual request path, then an exception is thrown. System using is
added to support use of String.Empty. Exception is used to ensure most
efficient operation on (assumed to be most common) successful case.
This patch adds an additional handler to the existing BaseHttpServer.
It does not affect any of the existing behaviors except insofar as the
new handler may be selected.
It is selected first because its Agent-oriented nature means that it
should not be pre-empted. The new handler type is defined by IHttpAgentHandler
in Framework/Servers and has two interface methods: Match and Handle.
The Match function returns a boolean result based upon examination of
information presented in the User-Agent header.
The Handle function expects to get the request and response instances
associated with the flow. The handler is responsible for ALL activity
associated with the request except in the event of an unhandled exception,
in which case the HandleAgentRequest routine will generate a 500 status
message and close the stream.
There are two immediateley apparent (and VERY easy to implement)
improvements that could be made:
1. The Match call could be allowed to operate over the entire
request context., rather than just agent identity.
2. The Handler could return a boolean indication of whether or not
the request was actually handled, and if not, the remaining handler
mechanism could take a shot at it. This would eliminate issues
arising from pre-empted streams.
enhancing IStreamHandler and IStreamedHandler interfaces so that OSHttp{Request,Response} get passed in,
allowing RestHandlers to set response status code, redirections, etc.
the attached patch set adds the (still work-in-progress but already
working) RestPlugin base class and the RestRegionPlugin code. we are using
XML serialization.
currently working:
GET /admin/regions/ -> returns UUID list of known regions
GET /admin/regions/<UUID> -> returns detailed region information
we'll be adding support for POST/DELETE/PUT and also for
/admin/regions/<UUID>/name etc.
* If the status cannot be retrieved, then the region startup will terminate.
* The aim of this is for earlier detection of situations where the region can send messages out but cannot accept incoming requests (often due to firewall issues)
* This is currently an extremely simplistic check which completely trusts whatever http uri is given by the region
* This contact may be problematic, though since the user service needs to be able to contact the region http uri, it doesn't seem unreasonable for the grid to have to be able to do so too at this stage
* This change will require a prebuild
This patch just tightens up console handling in BasOpenSimServer
and removes (or redirects) a couple of messages that were being issued
using Console.Writeline.
* This replaces the old behaviour of failing straight away, which could cause lost updates if the inventory service was slow in responding
* This is the first baby step to making all inventory requests behave this way, to reduce inventory lossage
This patch makes the "Show in Search" checkbox on the viewer work. Additionally, I also discovered that show-in-search objects use the JointWheel flag, so this patch currently uses that flag. LibSL needs to add a flag to enum LLObject.ObjectFlags, "IncludeSearch = 32768" so we aren't using a legacy flag.
Additionally this patch also contains a small fix to BaseHTTPServer that lets the response content-type to be something other than text/html. For some reason this didn't get submitted with the DataSnapshot merge.
* Should work in multi-region standalone and grid modes
* This should also solve other non-home region caps issues (map requests, RC client inventory requests, etc)
* We now pass CAPS information on to the destination region on region crossing, and set up a CAPS object when an agent becomes a master
* Current limitation is that this will only work if your http_listener_port is 9000
* This is a very early code cut (lots of bad practice, hard coding and inefficiency). However, I wanted to get this out there for feedback and my own sanity. Next few patches will clean up the mess.
* This will make it more obvious if one accidentally starts one's region server in standalone rather than grid mode but then tries to login to a grid (as I am wont to do)
* We are now sending back a fault code (-32601) if no xmlrpc method is found rather than an ordinary message
* The immediate upshot is that "show uptime" from the console will now show uptime on all server types (user, asset, grid, etc)
* DEV: This refactoring is far from complete - only just enough to makes the "show uptime" command common accross the servers. More is needed, but in this case it's somewhat like eating cabbage, which I prefer not to do all at once
* I intended to think about refactoring the servers to use this common base class, but temporary laziness won out.
* I'm leaving this here as a reminder/mind poke and for reasons of laziness (again)
* If people object to me leaving this kind of thing lying around, please say
* Typing 'stats' on the command line will given total number of successful logins today and yesterday
* A little bit more to come, probably
* Refactoring will follow next
* Cleaned up copyright notices in AssemblyInfo.cs's
* Added Copyright headers to a bunch of files missing them
* Replaced several common string instances with a static constant to prevent reallocation of the same strings thousands of times. "" -> String.Empty is the first such candidate.
* Don't forget, you need -loginuri *and* -loginpage
* Ex: -loginpage http://10.1.1.2:8002/?method=login -loginuri http://10.1.1.2:8002/
* The ?method=login is important, don't forget to add it
* If you customize your http_loginform.html file, be sure to keep the form post address as is.
* Added the web_login_key to the users table
* Added happy configurable http error message pages
* This update is large enough to have 'awe' value.. so backup your users or weep.
* Not tested on MSSQL, even though I added code to update the tables!
* I'm keeping it deactivated until some issues are resolved.
* I'm patching it in deactivated so the patch doesn't get outdated
* I've deactivated it by commenting out the handler for the application/xml+llsd content type.
* While I've tested this as much as possible on my setup and found the deactivated code doesn't cause any problems, consider this update experimental (event though it's deactivated)
* Added SSL Option to User Server to allow logins to be done via SSL.
* Added sane handling for when Remote Admin Plugin configuration is not found
* Added some performance boosts to an area of libTerrain which was highlighted in profiling.
To use , both the user server and Inventory server need to be running this latest revision. (older regions should be able to still be used, just the user won't have inventory on them). Also and HERE IS THE BIG BREAK ISSUE, currently, so that the initial inventory details for a user are added to the inventory db , you need to recreate the accounts using the user server "create user" feature. It should be quite easy to manual populate the inventory database instead but I someone else will need to look into that) Also I've only tested using SQLite as the database provider, there is a Mysql inventory provider but I don't know if it works (SQLite is set as default, so you will need to change it in the inventory server config.xml)
* Sqlite Storage Engine now supports terrain -- however be aware that every terrain revision stored will at 512KB to your database file. At the moment it is storing every revision from the first.
* Fixed an issue where by noverbose mode would display lots of useless junk. Noverbose mode is now quite usable.
* Fixed a whole bunch of console message issues such as naming and categorisation
* Removed legacy REST handling
* Created two custom IStreamHandlers for asset up/download
* Removed quite a lot of double and triple encodings, trying to work towards binary only and direct write into storage.
* Introduced BaseStreamHandler with GetParam() and some other goodies
* Implemented RestStreamHandler
* Some caps functions now use it
* Moved out RestMethodEntry from httpserver
* The IStreamHandler interface now reports required method and Content-Type
* Updated SimpleApp with various introduced dependencies
* Extracted ScenePrescence creation in Scene
* removed try-catchall from UserManagerBase (that actually hid a bug)
* Refactored RegionInfo
* handle is calculated
* it will explode upon accessing x,y,ip,port,externalip if not explicitly initialized
* Removed superfluous 'ref' keywords
* Removed a shitload of 'catch Exception e' that causes build warnings
* Lots of small refactorings, renames et c
* Ignored some bins
Charles Krinke