a009871827
Add basic TestFlyingAnimation() regression test
2011-12-03 02:39:21 +00:00
feef1dd732
Stop calling Animator.UpdateMovementAnimations() at the end of HandleAgentUpdate().
...
There's no point doing this if it's being called via PhysicsCollisionUpdate
2011-12-03 02:05:11 +00:00
f08aad8a40
For now, disable mechanism to limit avatar animation updates since this causes avatars to never reach the correct animation after some actions.
...
This reverts to situation where animation updates are made each frame on SP.PhysicsCollisionUpdate (though a packet is only sent if the anim actually changes).
m_updateCount was not being update on various avatar state changes, causing the correct animations to never be sent.
Always setting in HandleAgentUpdate() is not enough since the avatar is continually sending AgentUpdate packets.
One would need to identify all the conditions under which animations need to play out and set m_updateCount appropriately in SP.HandleAgentUpdate()
2011-12-03 01:47:12 +00:00
0ca8491bbe
refactor: Use just ScenePresenceAnimator.CurrentMovementAnimation rather than duplicating it with m_movementAnimation
2011-12-03 00:40:08 +00:00
5bbfb082dd
Use agent.Animator.CurrentMovementAnimation in llGetAgentInfo() rather than asking for a new determination
2011-12-03 00:33:24 +00:00
8185ce8b4a
Do a cagent.Anims != null check in SP.CopyFrom()
2011-12-03 00:30:13 +00:00
5ba8ca5662
Rename ScenePresenceAnimator.GetMovementAnimation() -> DetermineMovementAnimation() for better code readability
2011-12-03 00:27:21 +00:00
96c191f4fd
Stop SP.HandleAgentUpdate() and PhysicsCollisionUpdate() from being processed if we're dealing with a child ScenePresence.
...
Neither of these can have any effect on child agents
Now leaving warning about trying to set animation on a child agent active. Might temporarily pop up now and again.
2011-12-03 00:09:18 +00:00
054ebe8878
Stop some places where we're trying to reset animations in child agents where such requests are ignored.
2011-12-02 23:56:01 +00:00
2a6597f61e
Remove pointless Animator.TrySetMovementAnimation("STAND") in ScenePresnece constructor.
...
Comment was right - it is indeed useless since SP always starts off as child and TrySetMovementAnimation screens out child SP
2011-12-02 22:14:47 +00:00
1854c52ea3
Stop performing the asset save part of baked texture uploading on the UploadBakedTexture cap asynchronously.
...
This prevents a possible race condition where the client would be told all baked textures had updated before they were in the asset service.
The client would then trigger a set appearance which, after a delay, would send the avatar appearance out to other clients.
The race condition seems unlikely because of this delay but it's still possible.
Might help with grey avatar appearances.
2011-12-01 23:38:25 +00:00
5460f2e035
refactor: Separate the upload baked texture handler out from BunchOfCaps
2011-12-01 23:24:15 +00:00
2a9c9ae340
Provide more user feedback when "debug http" is set
2011-11-29 21:53:15 +00:00
fa63054c4f
On "show caps", stop excluding the seed cap but do exclude it elsewhere
2011-11-29 20:37:03 +00:00
679a5f6c0b
With "debug http 1", show the path with the query string instead of just the path.
...
Also simplifies debug levels to just 0 and 1
2011-11-29 17:26:45 +00:00
658d02b5e9
Improve some of the debug help messages
2011-11-29 16:56:31 +00:00
a17f93ff44
minor: remove mono compile warning, a Vector3 can never be null since it's a struct
2011-11-29 16:31:10 +00:00
d3a46b03bf
tabulate "show caps" output for easier readability
2011-11-29 16:29:11 +00:00
ff0d020007
Correct mistake in "debug eq" help
2011-11-29 16:18:14 +00:00
b6b0bc7b32
Add "debug http" command for currently simple extra debug logging of non-event queue inbound http requests to a simulator
2011-11-29 16:15:52 +00:00
19c10c892a
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-11-26 17:20:20 -05:00
ea0fc7b12c
Add missing property to llGetLinkPrimitiveParams
2011-11-26 17:06:28 -05:00
4efd9a3b7b
When removing an LSL sensor for a script (e.g. through llResetScript() or state change), don't also remove sensors for other scripts in the same prim.
...
Hopefully fixes http://opensimulator.org/mantis/view.php?id=4448 and http://opensimulator.org/mantis/view.php?id=4452
2011-11-26 01:55:36 +00:00
86cc00aaa8
minor: formatting changes in Scene.PacketHandlers.cs
2011-11-26 01:52:12 +00:00
46e1bcb6b6
minor: remove mono compiler warning
2011-11-26 01:40:46 +00:00
bafea2282a
Rip out unused Scene.HandleFetchInventoryDescendentsCAPS().
...
This has been handled by WebFetchInvDescHandler.Fetch() for some time.
2011-11-26 01:39:23 +00:00
11c19b0d2e
Use the same web fetch handler for every request from every avatar, since it contains no instance code
2011-11-26 00:29:01 +00:00
c5b636469d
Stop locking the requests coming in to WebFetchInvDecHandler.
...
There's no technical reason for this as the methods are thread safe. However, it might have served to slow down requests.
2011-11-26 00:13:04 +00:00
95a686dbf5
Fix config so that you can have both WebFetchInventoryDescendents and FetchInvnetoryDescendents2 caps active at once
2011-11-25 23:45:29 +00:00
5b4fe23f7f
Resolve error where an unknown asset type would cause the fetch inventory descendents cap to fail.
...
Introduced just a few commits ago in 0688861
2011-11-25 23:43:57 +00:00
676d32974a
Implement the FetchInventoryDescendents2 capability using the same code as WebFetchInventoryDescendents.
...
Enabling this by setting Cap_FetchInventoryDescendents2 = "localhost" in the [ClientStack.LindenCaps] section of OpenSim.ini downloads inventory via http rather than udp in later viewers.
2011-11-25 22:46:42 +00:00
b785f204ce
remove some mono compiler warnings
2011-11-25 22:19:57 +00:00
0688861aa7
Use the more extensive Utils.AssetTypeToString()/InventoryTypeToString() conversion rather than the arrays in TaskInventoryItem
2011-11-25 22:15:29 +00:00
8c82ff16ad
Fix WebFetchInventoryDescendents cap to use Utils.AssetTypeTostring/InventoryTypeToString to convert types to strings
...
These cover a wider range of types.
2011-11-25 21:54:31 +00:00
0a0aa77cfd
Adding missing CrossBehaviour.cs file to fix build
2011-11-24 22:46:43 +00:00
8e32ce85a7
Remove bizarre call to PhysicsScene.Simulate(0) in Scene.GetNearestAllowedPosition()
...
At least on ODE, this wasn't doing any harm but there wasn't any point to it either
2011-11-24 22:45:29 +00:00
2ae5b40ca6
On pCampBot, add bot as a property on behaviours instead of passing it in every time
2011-11-24 22:36:45 +00:00
cbbd992df4
minor: remove mono compiler warning
2011-11-24 22:11:54 +00:00
a58f5b2f66
When setting packet level logging via "debug packet", apply to all clients, not just root ones.
...
Also adds scene name and client type (root|child) to logged information.
2011-11-24 22:08:34 +00:00
0a60e9537f
comment out a noisy log line I accidentally left in from the last commit
2011-11-24 21:30:40 +00:00
63c137820b
Stop passing a request handler to the initial caps.RegisterHandler in EventQueueGetModule since this is immediatley replaced by a poll server handler.
...
This allows us to comment out a bunch of code and simplify the codebase and readability.
2011-11-24 21:27:35 +00:00
0174e326e3
Add a "debug eq" console command for debugging.
...
This will log outgoing event queue message names if turned on.
2011-11-24 20:27:11 +00:00
decabe1181
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-11-24 20:22:17 +00:00
bdcfd6afee
Add disabled CrossBehaviour to pCampBot, which is designed to cross test bots between neighbouring regions.
...
Not yet enabled since there is a bug where the initial cross will work but all subsequent movements on the receiving simulator appear to fail.
2011-11-24 17:35:33 +00:00
89b2fb2ff4
Append asset ID to URL for storage requests to allow caching proxies to work with Simian
2011-11-23 16:41:30 -08:00
5485e3da46
Merge branch 'master' of git://opensimulator.org/git/opensim
2011-11-23 16:11:17 -08:00
0cb33a5398
Line endings
2011-11-23 16:09:11 -08:00
ed7ddeecf2
Print out what behaviours are active when pCampBot starts up
2011-11-23 22:18:10 +00:00
d145750e87
Add teleport behaviour to pCampBot
...
This teleports the bot to any other regions +/- 5 on the x or y axis.
Quite aggressive at the moment since teleports keep occuring at a 1-10secs random interval.
No checking yet to see if teleport was successful.
2011-11-23 22:05:11 +00:00
1126efdcd0
In pCampbot, change "show status" command to "show bots"
2011-11-23 21:33:54 +00:00
Justin Clark-Casey (justincc)