SimulatorFPS: The actual optimal FPS of the simulator, un-fudged
SimulatorFPSFactor: The fudge factor that is applied to the stats sent to the viewer
SimulatorFPSWarnPercent: The percentage below which a lag meter should go to amber
SimulatorFPSCritPercent: The percentage below which a lag meter should go to red
To display the real values, a viewer would divide the reported FPS by the SimulatorFPSFactor and use that to calculate the percentage of SimulatorFPS. E.g. reported is 55fps, SimulatorFPSFactor is 5.0 and SimulatorFPS is 11.
Remove "currently unused" indicators for some parameters and add missing
"DestinationGuide" parameter in [GridServiceInfo] in
StandaloneCommon.ini.example as they do work for a standalone.
Regularize example URLs for externally provided web page and economy
helper information for uniformity. Correct mistake in reference to grid
wide DestinationGuide in override capability in OpenSim.ini.example.
Signed-off-by: Michael Cerquoni <nebadon2025@gmail.com>
Clean up of simulation version, the number that rules the compatibility of teleports:
- It's not configurable anymore, it's fixed in code. Each number means an increase in features of the teleport procedure
- Its definition moved to the global VersionInfo class
As of now it's still 0.3.
Conflicts:
OpenSim/Region/CoreModules/Framework/EntityTransfer/EntityTransferModule.cs
- It's not configurable anymore, it's fixed in code. Each number means an increase in features of the teleport procedure
- Its definition moved to the global VersionInfo class
As of now it's still 0.3.
This integrates the OpenSim refactoring to make physics, etc into modules.
AVN physics hasn't been moved to new location.
Does not compile yet.
Merge branch 'osmaster' into mbworknew1
Keep FlotsamAssetCache as default and pre-enabled asset cache module in
StandaloneCommon.ini./example to have common behaviour between grids and
standalones. Asset cache is needed to better support temporary assets
and texture drawing functions.
Clarify what must be changed in initial .ini files to create a working
standalone setup now that [Const] variables are used. Fix separator used
in one of choice lists for [Const] BaseURL descriptor. Minor changes to
line spacing of some sections in StandaloneCommon.ini.example file for
layout regularity. Correction of a typo in comment.
Signed-off-by: Diva Canto <diva@metaverseink.com>
Helpful comment for setting [const] section of OpenSim.ini to allow for
standalone. Correction to StandaloneCommon.ini.example as
[GridInfoServices] welcome parameter does work and is also useful for
standalones.
This means that from now on, [new] root folders have code 8 (FolderType.Root), as the viewers expect, as opposed to 9, which was what we had been doing. Normal folders are as they were, -1. Also now sending folder code 100 for Suitcase folders to viewers, with no filter.
All tests pass, but fingers crossed!
Robust now tells viewers what the maximum number of groups is. Viewers show this limit to the users, and enforce it.
The default is 42, which is what viewers had assumed was the maximum number before this update.
Signed-off-by: Oren Hurvitz <orenh@kitely.com>
As suggested by Orenh in mantis 7644, in the future it would be beneficial and less confusing to use only 1 of the 3 current config loaders.
Signed-off-by: Oren Hurvitz <orenh@kitely.com>
they were moved. At the moment, ossl settings are in the XEngine section although
they should apply to any LSLish script engine. Moves all ossl settings to osslEnable.ini
Update osslEnable.ini with more decriptive comments and set some functions to be more
restrictive -- especially the functions that allow scripts to do things to other
avatars and prims.
Per comments, putting new configuration files in bin/ is not preferred.
Add comments and instructions to heading of osslEnable.ini.
Add a commented out include of osslEnable.ini to OpenSim.ini.example.
Fix line endings of osslEnable.ini to be Unix style.
An 'include' in OpenSim.ini would enable the ossl functions but, for the moment,
the functions are still disabled by default and this file is an example
of what could be done.
This is necessary because both asset and inventory reuse generic connectors that will otherwise set up authentication configured in the [Network] section.
This allows one to set up authentication for private services whilst still being able to use asset and inventory on foreign grids.
The setting is AuthType = None in both [HGAssetService] and [HGInventoryService]
Private grid asset and inventory services will still set up the authentication as configured.
This is to address an issue where HTTP script functions could make calls to localhost and other endpoints inside the simulator's LAN.
By default, calls to all private addresses are now blocked as per http://en.wikipedia.org/wiki/Reserved_IP_addresses
If you require exceptions to this, configure [Network] OutboundDisallowForUserScriptsExcept in OpenSim.ini
closer to SL. This change should address small floor edges acting like
walls, approaching a step at any angle (other than walking backwards)
will allow walking up, and reducing the avatar pop-up when going up
stairs.
Note that I also made things consistent by removing both the EstateDataService and the SimulationService into their own dlls, just like all other services. They really didn't belong in Services.Connectors, since everything in that component is about network connectors to robust backends. We may have too many dlls, and at some point it might not be a bad idea to merge all services into one single dll, since they all have more or less the same dependencies.
This cleans up Opensim's use of mono addins. In particular, the extension points /OpenSim/RegionModules and /OpenSim/WindModule moved from OpenSim.exe to OpenSim.Region.Framework.dll. From here on, developers of region modules should declare their dlls to be dependent on OpenSim.Region.Framework, starting with version 0.8.1
Additional changes:
- Addins version uniformly updated to 0.8.1. These numbers should be compatible with the release numbers or else it becomes very confusing.
- Mono addins directives moved from files addins.xml to embedded directives in the class and assembly declarations, to make it all consistent
throttles. Setting adaptive_throttle_min_bps will change the
minimum rate that the adapative throttles will drop to in case
of network packet loss. The current rate default rate is 256kbps.
The viewer can throttle rates under that amount, but the dynamic
adaptation will not.
If log level is 1 then every script load is logged.
This means the <logger name="OpenSim.Region.ScriptEngine.XEngine"> section in OpenSim.exe.config is no longer needed to avoid log spam on regions with many scripts and can be removed.
This is implemented with a new collision type (PhantomToOthersAvatar) to potentially allow colliding and non-colliding avatars to be present in the same scene.
So there is no provision yet for giving avatars different collision types.
This commit replaces the temporary change in commit f3eaa6d8 where avatars would never collide when using BulletSim
This is equivalent to the av_av_collisions_off option in ODE.
This resolves an issue with pCampbot where some bots would occasionally connect with the same UDP source port.
This sometimes led to console messages where bots would report receiving packets multiple times that weren't marked as resends.
DLLs built under windows
This shows summary wearables information (shape, hair, etc.) for all avatars in the scene or specific information about a given avatar's wearables.
Similar to the existing "attachments show" command.
This is the same as already done for scene_throttle_max_bps
Internally, the token buckets are in bytes and the other help text makes it clear that the number is bytes per second
(though with the wrong assumption that 1 mbit = 1024 * 1024 bits whereas 1 mbit = 1000 kbits = 1000000 bits)
This resolves an issue with pCampbot where some bots would occasionally connect with the same UDP source port.
This sometimes led to console messages where bots would report receiving packets multiple times that weren't marked as resends.
DLLs built under windows
This setting was originally added some time ago to deal with issues where appearance was not received properly by all users.
However, it does not scale well with large numbers of agents.
Disabling to see if the original problem has abated or whether this will have to be tackled in another way.
[Startup] default setting UpdateTempCleaningEveryNFrames becomes UpdateTempCleaningEveryNSeconds.
Default becomes 180s instead of effective 182s (which would also vary with any changes in frame time or extra long frames)
If n > 1 for RootTerseUpdatePeriod only every n terse update is actually sent to observers on same region, unless velocity is effectively zero (to stop av drift).
If n > 1 for ChildTerseUpdatePeriod only every n terse update is sent to observers in other regions, unless velocity is effectively zero.
Defaults are same as before (all packets are sent).
Tradeoff is reduction of UDP traffic vs fidelity of observed av mvmt.
Increasing n > 1 leads to jerky observed mvmt immediateley for root, though not on child, where experimentally have gone to n = 4 before jerkiness is noticeable.
This adds the "show stats", "stats record", etc. commands and information on available Threadpool threads, etc.
It also adds the Watchdog which logs warnings if time between executions is unexpectedly large.
Experimentally, on the Linden Lab grid the avatar can rotate slightly before triggering AvatarUpdates, whereas this is practically impossible in OpenSimulator.
These updates allow other avatars to see rotations, though sensitivity is low since other avatars can only be seen in one of 8 body rotations.
This commit changes sensitivity from 0.01 to 0.1, which better matches LL and reduces UDP traffic which has a beneficial impact on network and CPU load.
This has no impact on rotations in the simulator itself so simulation fidelity is the same as before.
To change this setting back for test/other purposes, edit RootRotationUpdateTolerance in the [InterestManagement] section of OpenSim.ini
Running out of such threads under heavy load causes delayed packet processing which can lead to spurious UDP resends and knock on issues.
We already massively boost the min/max builtin pool worker and IOCP threads (which even with STP are still used for inbound network requests) without obvious adverse effects.
The threads are only instantiated if they are required.
This change does not affect other async_call_method options.
Move the experimental extra features functionality into the GridService. This sends default values for map, search and destination guide, plus ExportSupported control to the region on startup. Please watch http://opensimulator.org/wiki/SimulatorFeatures_Extras for changes and documentation.
These govern when AgentUpdates are sent to observers on position, rotation and velocity changes to an avatar (including the avatar themselves).
Higher values reduce AgentUpdate traffic but at a certain level will degrade smoothness of avatar and perceived avatar movement.
This, by default, enables terrain patches being sent to each avatar
from the avatar away (rather than the old outside-in pattern), only
sending terrain patches within the avatars view distance (making
view loading quicker), and sending multiple terrain patches per
protocol packet (making terrain loading and editing quicker).
co-op should be more stable as it doesn't abort threads, which can trigger virtual machine instability
This change will be invisible to users as script DLLs are recompiled automatically where necessary, though the change won't take affect until the next simulator restart.
This change has no effect on existing script state.
If you want to continue using abort, set ScriptStopStrategy = abort in the [XEngine] section of OpenSim.ini
Melanie Thielker