Viewer LL 3.3.4 and before sometimes fail to properly redisplay dynamic textures that have a small data length compared to pixel size when pulled from cache.
This appears to happen when the data length is smaller than the estimate discard level 2 size the viewer uses when making this GetTexture request.
This commit works around this by always regenerating dynamic textures that fall below this threshold rather than reusing them if ReuseDynamicTextures = true
This can be controlled by the [Textures] ReuseDynamicLowDataTextures config setting which defaults to false.
This is because recent viewers (3.2.1, 3.3.4) and probably earlier ones using the http GetTexture capability will sometimes make such invalid range requests.
This appears to happen if the viewer's estimate of texture sizes at discard levels > 0 (chiefly 2) exceeds the total texture size.
I believe this does not normally happen but can occur for dynamic textures with are large but mainly blank.
If this happens, returning a RequestedRangeNotSatisfiable will cause the viewer to not render the texture at the final resolution.
However, returning a PartialContent (or OK) even with 0 data will allow the viewer to render the final texture.
If true, this setting reuses dynamically generated textures (i.e. created through osSetDynamicTextureData() and similar OSSL functions) where possible rather than always regenerating them.
This results in much quicker updates viewer-side but may bloat the asset cache (though this is fixable).
Also, sometimes issue have been seen where dynamic textures do not transfer to the viewer properly (permanently blurry).
If this happens and that flag is set then they are not regenerated, the viewer has to clear cache or wait for 24 hours before all cached uuids are invalidated.
CUrrently experimental. Default is false, as before.
Intended for use if there are future issues with mono crashes whilst generate dynamic textures.
This test is triggered via a new test-stress nant target.
Not run by default.
Disabled (status quo) by default.
This flag makes the dynamic texture module reuse cache previously dynamically generated textures given the same input commands and extra params for 24 hours.
This occurs as long as those commands would always generate the same texture (e.g. they do not contain commands to fetch data from the web).
This makes texture changing faster as a viewer-cached texture uuid is sent and may reduce simulator load in regions with generation of lots of dynamic textures.
A downside is that this stops expiry of old temporary dynamic textures from the cache,
Another downside is that a jpeg2000 generation that partially failed is currently not regenerated until restart or after 24 hours.
This prevented more than one additional ordinary folder from being created in the base "My Inventory" user folder.
Added regression test for this case.
Switched tests to use XInventoryService with mostly implemented TestXInventoryDataPlugin rather than InventoryService
Disabled TestLoadIarV0_1SameNameCreator() since this has not been working for a very long time (ever since XInventoryService) started being used
since it doesnt' preserve creator data in the same way as InventoryService did and so effectively lost the OSPAs.
However, nobody noticed/complained about this issue and OSPAs have been superseded by HG like creator information via the --home save oar/iar switch.
This is to accomodate situations where viewers will create more than one 'type' subfolder (e.g. calling cards)
But at the same time to prevent multiple such 'system' folders (those in the base "My Inventory" user folder).
This also makes GetFolderForType() only return a folder in the base "My Inventory" folder, if such a type folder exists
This doesn't affect any core OpenSimulator code since all callers were passing true anyway
But it allows region modules to create objects that are never persisted.
In testing, it appears that if multiple threads dispose of separate GDI+ objects simultaneously,
the native malloc heap can become corrupted, possibly due to a double free(). This may be due to
bugs in the underlying libcairo used by mono's libgdiplus.dll on Linux/OSX. These problems were
seen with both libcario 1.10.2-6.1ubuntu3 and 1.8.10-2ubuntu1. They go away if disposal is perfomed
under lock.
This is to resolve a reported issue in http://opensimulator.org/mantis/view.php?id=6232
Here, the land management module is using OpenSim.Framework.Cache (the only code to currently do so apart from the non-default CoreAssetCache).
This is to allow a second attempt to remove an avatar even if "show connections" shows them as already inactive (i.e. close has already been attempted once).
You should only attempt --force if a normal kick fails.
This is partly for diagnostics as we have seen some connections occasionally remain on lbsa plaza even if they are registered as inactive.
This is not a permanent solution and may not work anyway - the ultimate solution is to stop this problem from happening in the first place.
This was working in 0.7.2 but was accidentally removed from 0.7.3.
The --publish option for "save oar" will now save oars stripped of parcel owner information as well as scene object info.
Please use the --publish option if you want to publish oars that may be later loaded by others to the same grid from which they were saved.
Add description and default of false (as before) to OpenSimDefaults.ini
If set to true, this config switch will resend avatar appearance information (a small amount of UUID data, not the baked textures themselves) to other avatars in the sim every 60 seconds.
For me, this has helped with situations where avatars appear persistently grey - the LL viewer sometimes did not appear to request assets the first time the appearance data was sent.
However, this switch will not help with other appearance failure situations (e.g. failure to bake assets).
This setting is experimental but will not have any significant impact on the simulator if turned to true.
The bug manifested as follows: a large world was saved. All the assets were found. But for some unknown reason, the timeout timer was restarted. So after 1 minute it closed the Archive Writer, because it didn't receive any more assets during that minute. That caused the OAR to become corrupted because ArchiveWriteRequestExecution.Save() was still running.
The convention is that if an object implements IDiposable() the code must explicitly call Dispose() or call it via the using statement.
This may be particularly important for GDI+ objects since they encapsulate native code entities.
themselves. For that, the physics module simply calls RequestAssetMethod, which
in turn points to Scene.PhysicsRequestAsset. This gives physics access to
the asset system without introducing unwanted knowledge of the scene class.
A deadlock was observed today where NPC removal on a script thread would lock the NPC list and then try to lock the sensor list via scripted attachment removal.
Concurrently, the sensor sweep thread would lock the sensor list and then try to lock the NPC list to check NPC status.
This commit resolves the deadlock by replacing the sensor list on update rather than locking it for the duration of the sweep.
c150320 started explicitly disposing of the physics scene and nulling it out on region shutdown.
However, the update loop may not have yet checked Scene.ShuttingDown, particularly if avatars were not in the scene, causing failure when it tried to lookup time dilation.
This commit moves the setting of m_shuttingDown above the existing 500ms pause to notify avatars that they are being kicked.
This should not affect the few other places that use this flag.
Possibly this was for a feature that was never implemented or was otherwise removed.
Thanks to SignpostMarv for the spot of the warning that shows this parameter was never changed.
and into its own class. The BulletSim data structures track
individual prims as linksets of 1 so most of the prim code is not
different between a linked and unlinked object.
If we copy the asset description then we will only ever replicate the very first description, if there was one, not any subsequent changes.
Thanks to Oren Hurvitz of Kitely for this patch from http://opensimulator.org/mantis/view.php?id=6107
I have adapted it slightly to change the order of arguments (name before description rather than vice-versa) and slightly improve some method doc.
This aims to capture the amount of memory that OpenSim turns over whilst operating a region.
This memory is not lost - apart from leaks it is reclaimed by the garbage collector.
However, the more memory that gets turned over the more work the GC has to do to reclaim it.
This is fired when all regions are ready or when at least one region becomes not ready.
Recently added EventManager.OnRegionReady becomes OnRegionReadyStatusChange to match OnLoginsEnabledStatusChange
There is less justification for this word arrangement (verb after noun) now that command help is categorized.
Also removes "image queues show" in favour of existing alias "show image queues".
justincc's original work. Sample scripts before doing so. Also refactor some
crucial common code and eliminate parameters that were only ever used with
the same constant value.
When linking, detach the no longer used SOG's from backup so they can be
collected. Since their Children collection is never emptied, they prevent
their former SOPs from being collected as well.
Physical linksets are fully functional.
Tweeking of the vehicle code to make it semi-work.
Utilize the new API2 for some setting operations.
Add GetOrientation() API call for proper reporting of children of linksets.
Changes the interface between C# and C++ code so old DLLs won't work!
with an ini configuration parameter.
Correct computation of relative offsets of children in a linkset.
Remove a prim from any link relationship before deleting it.
Minor code flow cleanups.
This same constant will later be used with llGetDetectedType().
This constant has a different name from NPC to avoid possible conflict with future LSL changes.
This constant has a different value to try and avoid unnecessary conflict with future constants that may use the same value.
Using the 'NPC' constant with llSensor() will remain valid but is deprecated.
Giving a large folder from one avatar to another was causing a long delay when handled synchronously, since it took some time to retrieve the necessary data from the inventory service.
Handling this asynchronously instead stops this delay from disrupting all avatars in the scene. This has been shown in OSGrid.
I see no reason for not handling all IM messages asynchronously, just as incoming chat is handled asynchronously, so this has been switched for all instant messages.
Thanks to Nebadon for testing this change out.
Even where checks are being made they aren't enough since they all assume that the Animator they just checked is still there in the next line, which is not necessarily the case without locking.
The memory used is small and these should be GC'd anyway when the SP is released. If this is not happening then the wider problem of old SPs being retained needs to be resolved.
This replaces EventManager.OnLoginsEnabled which only fired when logins were first enabled
and was affected by a bug where it would never fire if the region started with logins disabled.
This saves listeners from having to re-retrieve the scene from their own lists, which won't work anyway if multiple regions with the same name have been allowed
This reverts commit 59a29f5f22.
The original revert was committed by mistake - it turns out this was not the cause of Mantis 6089
Conflicts:
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
This appears to be a regression from back in commit db91044 (Mon Aug 22 2011) where we started to send TaskInventoryOffered msg dialog rather than InventoryOffered dialog.
This is probably correct, but failed because the bucket was too large and because we wouldn't have handled the TaskInventoryDeclined option anyway.
This patch handles both of these and make llGiveInventoryList() use TaskInventoryOffered as well
Fixes http://opensimulator.org/mantis/view.php?id=6089
Note, this behaviour appears to be at variance with the ll grid as of Tues 17 July 2012, testing with viewer 3.2.1.
The item name in inventory does not change either at the point of detach or after a relog.
This doesn't seem to make any sense and probably stems from a period when this code was directly involved in attaching objects directly from the scene.
This message is already being sent by InventoryAccessModule code instead.
This was because teleporting to the new region invoked the new session setup code before the agent was removed from the old region, which then invoked the session teardown code.
Now, we only invoke the teardown code if the region ID occupied by the agent being removed is the same as the one registered for the current session.
This may well come back in the future when this subinterface is actually used but it currently isn't and I feel the name was poor.
Everything uses IClientAPI.RemoveEndPoint which also returned the full endpoint rather than just the ip address.
Also changes separator from comma to bar to match existing [LoginService] config features.
Divergence of config names for identical facilities in different places makes for an unnecessarily confusing user experience.
Also change to use standard table formatting
"show circuits" and "show connections" console commands are very similar but access different data structures.
The encodings are thread-safe and already used in such a manner in other places.
This isn't done where Byte Order Mark output is suppressed, since Encoding.UTF8 is constructed to output the BOM.
This is only currently meant for use by regression tests that don't have any issues if XEngine is started up quickly, since no other operations will be occuring simultaneously.
Therefore, this is not yet documented externally.
This also makes the detection in SP.FindNextAvailableSitTarget() and SendSitResponse() identical.
Previously they varied slightly (SendSitResponse didn't check for an older type of invalid quaternion) but the practical effect is most probably zero.
This is to fix a regression starting from 5301648 where attachments had to start being deleted before persistence in order to avoid race conditions with hud update threads.
This is to avoid the worst of the problems in mono 2.6, 2.10 where an aborted thread does not always release all its locks.
This very short grace period is identical to the existing behaviour when a script is removed from the scene.
This prevents a stack overflow where a get position on the avatar will refer to the attachment which will in turn refer back to the avatar.
This required recording of all sitting avatars on a prim which is done separately from recording the sit target avatar.
Recording HashSet is null if there are no sitting avatars in order to save memory.
This was causing 2 copies of the module to be created for each scene.
Probably no bad consequences other than a small waste of memory (both for the module and for the warp3D renderer it loaded)
This is always done later on in SceneGraph.AddSceneObject() if the call hasn't failed due to sanity checks.
There's no other purpose for this method to exist and it's dangerous/pointless to call in other conditions.
Cleanup preceeding major work. No major functional changes.
Collisions reported to simulator more efficiently.
BulletSim binaries updated using a more recent version of Bullet (v2.80-r2527).
This is to help detect situations where thread timeout warnings are being generated because of general machine issues rather than deadlock, network or other problems.
This works like osForceAttachToAvatar() but allows an object to be directly specified from the script object's inventory rather than forcing it to be rezzed in the scene first.
Still only attaches objects to the owner of the script.
This allows one to bypass the complicated co-ordination of first rezzing objects in the scene before attaching them.
Threat level high.
SignpostMarv