4c781db572
Make RootTerseUpdatePeriod and ChildTerseUpdatePeriod configurable in [InterestManagement] in OpenSim.ini for experimental purposes.
...
If n > 1 for RootTerseUpdatePeriod only every n terse update is actually sent to observers on same region, unless velocity is effectively zero (to stop av drift).
If n > 1 for ChildTerseUpdatePeriod only every n terse update is sent to observers in other regions, unless velocity is effectively zero.
Defaults are same as before (all packets are sent).
Tradeoff is reduction of UDP traffic vs fidelity of observed av mvmt.
Increasing n > 1 leads to jerky observed mvmt immediateley for root, though not on child, where experimentally have gone to n = 4 before jerkiness is noticeable.
2014-08-14 01:39:26 +01:00
f1f935ed95
Add 'server' stats information to pCampbot, as used elsewhere in OpenSimulator
...
This adds the "show stats", "stats record", etc. commands and information on available Threadpool threads, etc.
It also adds the Watchdog which logs warnings if time between executions is unexpectedly large.
2014-08-13 19:53:42 +01:00
fbdf507e98
Update libomv libraries with those built from commit 2208379.
...
This is to resolve some issues for pCampbot, chiefly with capability connection and inbound handling.
2014-08-12 01:53:48 +01:00
91f3be71e3
Reduce default rotation AgentUpdate output sensitivity to a setting that cuts down UDP traffic without obvious adverse effects on observed avatar rotations.
...
Experimentally, on the Linden Lab grid the avatar can rotate slightly before triggering AvatarUpdates, whereas this is practically impossible in OpenSimulator.
These updates allow other avatars to see rotations, though sensitivity is low since other avatars can only be seen in one of 8 body rotations.
This commit changes sensitivity from 0.01 to 0.1, which better matches LL and reduces UDP traffic which has a beneficial impact on network and CPU load.
This has no impact on rotations in the simulator itself so simulation fidelity is the same as before.
To change this setting back for test/other purposes, edit RootRotationUpdateTolerance in the [InterestManagement] section of OpenSim.ini
2014-08-08 23:39:40 +01:00
a483525016
Change default max threads if SmartThreadPool is used as the main thread pool from 15 to 300
...
Running out of such threads under heavy load causes delayed packet processing which can lead to spurious UDP resends and knock on issues.
We already massively boost the min/max builtin pool worker and IOCP threads (which even with STP are still used for inbound network requests) without obvious adverse effects.
The threads are only instantiated if they are required.
This change does not affect other async_call_method options.
2014-08-08 23:34:49 +01:00
10a8d2852e
OpenSimExtras
...
Move the experimental extra features functionality into the GridService. This sends default values for map, search and destination guide, plus ExportSupported control to the region on startup. Please watch http://opensimulator.org/wiki/SimulatorFeatures_Extras for changes and documentation.
2014-08-06 17:25:12 -04:00
78ccadb27e
Add RootPositionUpdateTolerance, RootRotationUpdateTolerance, and RootVelocityUpdateTolerance parameters to [InterestManagement] in OpenSimDefaults.ini
...
These govern when AgentUpdates are sent to observers on position, rotation and velocity changes to an avatar (including the avatar themselves).
Higher values reduce AgentUpdate traffic but at a certain level will degrade smoothness of avatar and perceived avatar movement.
2014-08-06 00:53:14 +01:00
cac910d401
Add region-side extra feature setting for destination guide
2014-07-31 08:20:06 -04:00
3ec695e05b
Add Chat module extra feature settings to GridExtraFeatures service
2014-07-30 15:01:26 -04:00
e0d8f42e6b
Simulator Extra Features Service
...
Provide a means for regions to fetch extra features supported by modern viewers from a central location
.
2014-07-30 11:24:39 -04:00
46781253c3
fix comments in physics section of [Startup] to reflect the actual default engine.
2014-07-25 12:30:09 -04:00
e85291329b
Add suppression of grid-side "show regions" command in simulator console for Hypergrid setups as well as normal grid.
...
Should have been done in recent commit 6048dfcdhttp://opensimulator.org/mantis/view.php?id=7281
2014-07-25 02:02:07 +01:00
086bc6f748
Add missing default female hair texture for Ruth avatar.
...
This was not in library assets despite being referred to in assets/BodyPartsAssetSet/base_hair.dat
Texture ID is 7ca39b4c-bd19-4699-aff7-f93fd03d3e7b
Taken from https://github.com/openmetaversefoundation/simiangrid/blob/master/Grid/default_assets/Default%20Female%20Hair-7ca39b4c-bd19-4699-aff7-f93fd03d3e7b.j2c
2014-07-24 20:03:19 +01:00
11031abf26
Changed the default XBakes directory to a local path: "./bakes".
...
Previously it was an absolute path. Now it's a sibling of the maptiles directory.
This fixes http://opensimulator.org/mantis/view.php?id=7063
2014-07-21 09:27:47 +01:00
b81187db5a
Set "[Terrain]SendTerrainUpdatesByViewDistance=true" by default.
...
This, by default, enables terrain patches being sent to each avatar
from the avatar away (rather than the old outside-in pattern), only
sending terrain patches within the avatars view distance (making
view loading quicker), and sending multiple terrain patches per
protocol packet (making terrain loading and editing quicker).
2014-07-20 10:56:52 -07:00
6048dfcd71
In grid mode, add SuppressConsoleCommands flag to [GridService] so that we can stop misleading grid service only console commands from registering.
...
We need to do this because the simulator initializes and internal copy of the GridService in grid mode for internal purposes
2014-07-18 22:57:04 +01:00
8cd7ca568d
Change default script stop method to co-op instead of abort.
...
co-op should be more stable as it doesn't abort threads, which can trigger virtual machine instability
This change will be invisible to users as script DLLs are recompiled automatically where necessary, though the change won't take affect until the next simulator restart.
This change has no effect on existing script state.
If you want to continue using abort, set ScriptStopStrategy = abort in the [XEngine] section of OpenSim.ini
2014-07-16 22:58:38 +01:00
d62acc7e37
Update information in OpenSimDefaults to reflect the fact that ScriptStopStrategy in [XEngine] can now be changed without manually deleting old compiled scripts.
2014-07-14 20:53:06 +01:00
ba233008cd
Changed GetUserInfo so that the exposure of user account details is ruled by a configuration variable. It's on by default.
2014-07-06 16:02:04 -07:00
abf85b7f19
Bulletsim: Create AvatarTerminalVelocity to BulletSim like what ODE and SL has. Before this falling from really high caused the avatar to fall faster then the veiwer can handle and cause camera issues.
2014-06-27 23:34:34 +01:00
7f0adfd203
Add [Startup]LogShowStatsSeconds=n parameter which controls the interval
...
that simulator statistics is output to the console. Setting to zero turns
stats logging off.
2014-06-13 21:27:07 -07:00
8956cdc55f
Add [Terrain]SendTerrainUpdatesByViewDistance=false to OpenSimDefaults.ini
...
so people can find the setting.
2014-06-08 09:50:31 -07:00
0dc14b5f35
fix the comment section of max_distance setting to reflect default value
2014-06-06 22:29:04 -04:00
74cda2ad78
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-06-06 14:51:05 -07:00
2766b37d8b
Missed this ini change in previous commit
2014-06-06 14:50:38 -07:00
b913f1c8ab
bump default teleport limit to 65535 regions
2014-06-06 16:59:13 -04:00
fe779128b0
Added simulation version compatibility check so that agents coming from 0.7.6 to a varregion running in 0.8 and above will be denied teleport, rather than be allowed and crash the viewer.
2014-06-06 11:04:53 -07:00
90de9df3e8
Better comment regarding SizeX and SizeY
2014-06-05 20:31:31 -07:00
30cde52634
Updated Regions.ini.example to include var regions configs.
2014-06-05 16:51:08 -07:00
464d31b70b
Stop appending redundant newline to console messages in Robust and pCampbot configs
...
This is to fix an issue since recent commit fbcb763
2014-05-27 20:44:00 +01:00
20f20895cf
Adds optional HTTP Basic Authentication to Robust service connectors.
2014-05-23 16:19:43 -07:00
77a331fce3
Add DebugMessagingEnabled = false to OpenSim.ini.example for consistency. Slightly simplify config comments.
2014-05-19 23:00:04 +01:00
b46be88db6
Split verbose groups messaging logging into its own setting separate from that of the groups module.
...
This is to allow us to get useful information on messaging without being overwhelmed by the rest of groups debug.
Enabled with [Groups] DebugMessagingEnabled = true in config (default false)
Or "debug groups messaging verbose true|false on the console" (similar to existing groups setting).
Done for both xmlrpc and V2 groups.
2014-05-19 22:45:17 +01:00
f4cba27105
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-05-07 17:00:12 -07:00
2b33677402
Add GridUserService service config to [UserAccountService] in Robust[.HG].ini.example so that home can be set for new users rather than always warning that it can't be set.
...
Code already exists to do this but forgot to put entry into config files a long time ago.
Thanks to AliciaRaven for the spot.
Relates to http://opensimulator.org/mantis/view.php?id=7155
2014-05-07 23:32:02 +01:00
812f5e124d
Remove duplicate HypergridLinker entry from [GridService] in Robust.HG.ini.example
2014-05-07 18:39:56 +01:00
539165e6bd
minor: Change configuration text in config files to reflect the existing situation of BulletSim as the default physics engine.
2014-05-06 17:28:21 +01:00
13b2ac1425
Makes it possible to support grids in which all the simulators share all central services of a Robust server EXCEPT assets. In other words, grids where the simulators' assets are kept in one DB and the users' inventory assets
...
are kept on another. When users rez items from inventory or take objects from world, an HG-like asset copy takes place between the 2 servers, the world asset server and the user's asset server. This makes the simulators independent of the central asset server.
Note that this an advanced configuration and requires some security strengthening coming up.
2014-05-04 20:54:42 -07:00
5a10da3ee8
Added a optional key between the group remote connectors, sim and service. This allows for more secure group services, to be used by collections of mutually-trusting grids.
2014-05-03 17:13:53 -07:00
a108fcac95
Restore overload mode accidentally disabled in a prior commit. Add a new
...
config option, LogOverloads, to log when a thread pool overload occurs.
This option defaults to "True" because the logging data is useful for
diagnosing threading issues.
2014-04-25 21:34:29 +01:00
d1865c526d
Removed unused CsharpSqlite DLLs
2014-04-24 06:19:49 +01:00
18b91fdbe9
Tweak to PrimLimits and add missing Regions.ini example
...
Signed-off-by: Melanie <melanie@t-data.com>
2014-04-12 14:40:34 +01:00
562a3cb338
BulletSim: small tweek to avatar height reduce feet embedded into prims.
...
This adjustment makes a default, shoeless avatar stand properly on a prim
for the various heights (0% to 100% in the appearance adjustment).
2014-04-10 06:53:36 -07:00
65c4cb48ac
BulletSim: make avatar physical shape to be a rectangle rather than
...
a capsule. Set the default to be the rectangle shape and adjust the
parameters in OpenSimDefaults.ini for the new shape.
The rectangle shape will perform better and avatar height can be
computed more accurately.
2014-04-02 21:53:58 -07:00
a15282f023
Merge branch 'master' into m_test
2014-03-27 12:21:38 -04:00
af54e6f370
minor: Change incorrect "Maximum" in the PhysicalPrimMin OpenSim.ini.example description to "Minimum"
...
Thanks to aiaustin for the spot.
2014-03-26 23:45:02 +00:00
e7fa8a4699
minor: change misspelling of overriden to overridden in comments within config files
...
Thanks to aiaustin for the spot.
2014-03-26 23:43:49 +00:00
14a7ddb885
Revert "Use log-rolling on the log files (once per day)"
...
This reverts commit 8ecab21b37
2014-03-26 08:56:56 +02:00
cffea984f1
minor: Remove "js" (Javascript) from list of allowed languages in script config since it hasn't been present in OpenSimulator for a very long time (0.6 days)
...
One reason support was removed is that the external DLL that implemented Javascript stopped development.
Not sure how well this ever worked in OpenSimulator.
Not removing vb for now as this is directly supported by Mono (via vbnc compiler) though I strongly suspect it is also inoperable.
2014-03-26 00:50:33 +00:00
fce3fca7f9
Add the UserProfiles local service module to non-HG Standalone configuration.
2014-03-25 11:08:58 -04:00
8ecab21b37
Use log-rolling on the log files (once per day)
...
Resolves http://opensimulator.org/mantis/view.php?id=6950
2014-03-25 09:53:02 +01:00
5b2af7f99e
Moved the linkage between LoginService and HGInventoryService to the config file
2014-03-24 18:33:18 +02:00
f5ae36d7e2
Updated Prebuild to support .NET 4.5
...
Resolves http://opensimulator.org/mantis/view.php?id=6951
2014-03-24 12:26:54 +01:00
81c9952e99
Added missing quotes in Robust.HG.ini.example
2014-03-23 16:40:09 +02:00
3d0778bcd6
Allow Mono Plugin Registry setting for Regions
...
Signed-off-by: Melanie <melanie@t-data.com>
2014-03-22 01:29:51 +00:00
da25903300
Adding a way to disable/enable the in built Dwell Module
2014-03-20 22:35:50 +00:00
b5f94c72b9
Allow MaptileStaticFile path to be set to anywhere and not force it to bin/maptiles
2014-03-19 11:16:52 -04:00
61353dde80
Allow Region specific static maptiles to be loaded from file.
2014-03-18 22:18:50 -07:00
fdcd392582
Set executable bit on Npgsql.dll for cygwin
2014-03-18 21:04:37 +00:00
f27766d47b
Set executable flag on BulletXNA.dll for cygwin
2014-03-18 21:02:51 +00:00
71c808cd32
PhysicalPrimMax 64m for OpenSim_ini_example standard size prim
...
Signed-off-by: Robert Adams <misterblue@misterblue.com>
2014-03-10 22:11:24 -07:00
3e8f593bf2
PhysicalPrimMax to 64m for ini Default files to enable standard size prims and mesh to be used with vehicles.
...
Signed-off-by: Robert Adams <misterblue@misterblue.com>
2014-03-10 22:11:09 -07:00
4f67286044
fix missing quote for xBakes connector in Robust example ini files
2014-03-09 19:09:10 -04:00
cfd3e8f0ea
minor spelling mistake fix.
2014-03-09 11:46:25 -04:00
abcb2cdb36
add XBakes connector to Robust.HG.ini.example
2014-03-08 21:50:41 -05:00
a96601478c
add [BakedTextureService] section to Robust.HG.ini.example file same as Robust.ini.example.
2014-03-08 21:48:33 -05:00
e3c4936dea
remove RefreshTime = 0 from [MapImageService] in Standalone.ini, StandaloneHypergrid.ini, Grid.ini, GridHypergrid.ini they were redundant and would not allow variables in OpenSim.ini to be set to anything.
2014-03-08 16:28:45 -05:00
da990d01f2
set RefreshTime = 0 in [MapImageService] in Standalone.ini and StandaloneHypergrid.ini to eliminate memory leaking for Warp3D map tiler, these variables should be erased needs more discussion!
2014-03-08 15:57:19 -05:00
12f2648a57
set RefreshTime = 0 in [MapImageService] in Grid.ini and GridHypergrid.ini to eliminate memory leaking for Warp3D map tiler, these variables should be erased needs more discussion!
2014-03-08 15:41:26 -05:00
d6837f5dc7
update libomv to 59280cfe3e96714151158f4ec7b167af57f60e93 (current head) to hopefully resolve zlib incompatibilities when rendering maptiles with mesh
2014-02-22 18:52:59 -08:00
1aed6567a8
Samle configurations for the baked texture server.
2014-02-04 02:49:13 +00:00
0842e2e15b
BulletSim: default physical terrain implementation to heightmap.
...
It originally looked like mesh terrain would perform better for vehicles
but, after much use, heightmap is the clear winner.
Force terrain implementation to heightmap if the physics region is
larger than legacy region size. This solves running out of memory for
very large regions.
2014-01-29 06:44:14 -08:00
c6e9db5866
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Framework/RegionSettings.cs
OpenSim/Region/CoreModules/World/WorldMap/WorldMapModule.cs
OpenSim/Region/Framework/Interfaces/IInterregionComms.cs
OpenSim/Region/OptionalModules/World/NPC/Tests/NPCModuleTests.cs
2014-01-28 21:02:20 +00:00
4ccb15290e
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ClientStack/Linden/UDP/LLClientView.cs
OpenSim/Region/CoreModules/Framework/InventoryAccess/InventoryAccessModule.cs
OpenSim/Region/Framework/Scenes/SceneObjectPartInventory.cs
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
2014-01-28 20:47:36 +00:00
4c362a83f9
Merge branch 'master' into varregion
2014-01-21 11:31:51 -08:00
83626e60e6
Adds a configuration option to cannibalize bandwidth from the
...
udp texture throttle and move it to the task throttle. Since most
viewers are using http textures, the udp texture throttle is holding
onto bw that could be used for more responsive prims updates. See
the documentation for CannibalizeTextureRate in OpenSimDefaults.ini.
Option is disabled by default.
2014-01-20 18:59:43 -08:00
4800303abd
update OpenMetaverse.StructuredData to git master (bf4e9f654ff99c85e20b53e56faac38e307dd8c2) which fixes JSON OSD serialization to a standards compliant means of encoding floating point NaN and Infinity
2014-01-20 03:18:36 -08:00
3018b2c5d7
Materials module: a) Store materials as assets; b) Finalized it (removed the "Demo" label; removed most of the logging); c) Enabled by default
...
Changed UuidGatherer to use 'sbyte' to identify assets instead of 'AssetType'. This lets UuidGatherer handle Materials, which are defined in a different enum from 'AssetType'.
2014-01-20 00:38:42 -08:00
54a4b9eab4
varregion: Update Warp3D to properly handle varregions.
...
This includes additions to Warp3D:
Optional rendering of mesh and scupltie prims (INI parameter. Off by default)
Texturing of large prims (INI parameter. On by default)
Better garbage collection
2014-01-19 07:33:56 -08:00
70dd4cf152
In library inventory, correct asset id for llSay example script
...
From http://opensimulator.org/mantis/view.php?id=6917
Thanks to FreakyTech for this spot.
2014-01-10 20:51:28 +00:00
6d6b9ab791
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ClientStack/Linden/Caps/BunchOfCaps/BunchOfCaps.cs
OpenSim/Region/ClientStack/Linden/UDP/LLClientView.cs
OpenSim/Region/Framework/Scenes/ScenePresence.cs
2013-12-07 01:08:49 +00:00
13017034b1
minor: Change ProfileServiceURL reference in OpenSim.ini.example to be consistent
2013-11-28 00:23:27 +00:00
3589acdab1
Merge branch 'master' into careminster
...
Conflicts:
.gitignore
OpenSim/Region/CoreModules/Scripting/HttpRequest/ScriptsHttpRequests.cs
OpenSim/Region/CoreModules/World/Land/LandManagementModule.cs
prebuild.xml
runprebuild.bat
2013-11-23 19:13:22 +00:00
8217b52d3a
Remove old *.exe.config files that related to programs that have long been deleted or renamed
2013-11-23 01:40:48 +00:00
bd5c414618
Stop .NET 4 complaining on Windows when it tries to load in DLLs that haven't been marked as trusted in the operating system.
...
This is done by adding <loadFromRemoteSources enabled="true" /> to the execute *.config files.
This tells .NET 4 to trust the DLLs, which is safe in our case since we are not loading DLLs from locations that untrusted users may specify
Addresses http://opensimulator.org/mantis/view.php?id=6853 and http://opensimulator.org/mantis/view.php?id=6846
As far as I know, CAS policy checks have never been performed in Mono
2013-11-23 01:29:55 +00:00
f63fd81a68
update libomv to 1538d3088e79ff0a9abea6905b487755b6890a85 in hope that it fixes some bulletsim issues on linux
2013-11-15 14:40:38 -08:00
869a23e223
Update OpenSim.32BitLaunch.exe and Robust.32BitLaunch.exe to .NET 4 versions.
...
Also fixes some issues in associated solution files
2013-11-13 01:07:14 +00:00
91b70bf3fe
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ClientStack/Linden/UDP/LLUDPServer.cs
2013-11-08 17:55:01 +00:00
626a050159
minor: Make PID file example in Robust.HG.ini more meaningful as is now the case in OpenSim and vanilla ROBUST config files
2013-11-08 00:34:35 +00:00
3b2721c957
update OpenMetaverse.dll to 7ae74674a09877119cbb4c80cbffea474e20da29
...
- addresses particle flags issue
2013-11-06 19:13:41 -08:00
52ff860f30
minor: Make PID file examples in OpenSim and Robust config somewhat more meaningful than just /tmp/my.pid
2013-11-06 23:27:19 +00:00
e1ce3907f2
Update libomv to 7e260ad419ebb1c24a5f1b123e11dd930e05f414. Thanks lkalif :)
2013-11-05 23:01:14 -08:00
417836ac5e
Updated libomv to 25ee208a 2013-11-05
2013-11-06 02:43:44 +01:00
ba203ed94f
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Framework/InventoryAccess/InventoryAccessModule.cs
OpenSim/Region/Framework/Scenes/SceneObjectPartInventory.cs
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
2013-11-03 21:34:36 +00:00
46a4c32e27
update libomv to 5b4c1e8694479629f7cacd72dd6bc39a6b327f9c (git master as of time of this commit)
2013-10-30 22:01:34 -07:00
d23ef79f98
BulletSim: restore collision flags when clear collision cache.
...
THis fixes the extranious addition of objects to the collision cache
which created extra CPU overhead.
2013-10-26 21:30:51 -07:00
5be8f6632b
minor: Fix commented out GridInfo service URL to be 8002 in Robust.ini.example rather than 9000 (already done in Robust.HG.ini.example)
2013-10-25 00:54:33 +01:00
a7e7bed660
BulletSim: update SOs and DLLs with version that enables compressed
...
AABB maps for Bvh meshes. This greatly reduces the memory usage for
large meshes and for mesh terrain in particular.
2013-10-19 11:44:27 -07:00
571a75f934
BulletSim: update lib32/libBulletSim.dylib to current BulletSim C++ API.
2013-10-18 09:15:08 -07:00
1bd89ac287
Readding Mono.Security.dll. This comes from http://pgfoundry.org/frs/download.php/3354/Npgsql2.0.12.0-bin-ms.net3.5sp1.zip
...
This is identical to what was previously there but need to record origin information
2013-10-17 22:31:15 +01:00
6221356712
Removing Mono.Security.dll temporarily so that it can be re-added with origin information
2013-10-17 22:28:58 +01:00
8fdf70b87e
* Fixes mantis mantis 0006803 [PGSQL] - Simulator crashes - Mono.Security.dll missing. The root of the issue is that the Postgres driver relies on Mono.Security.dll from the mono project. Unfortunately, when using Mono, including the dll in the distribution causes conflicts. This solution puts Mono.Security.dll in bin/lib/NET/ and, if windows .NET is the runtime, informs the assembly loader to load bin/lib/NET/Mono.Security.dll when .NET is scanning for the Mono.Security namespace. On Mono, the included Mono.Security assembly is ignored.
2013-10-16 20:16:29 -05:00
acfe603a5f
As discussed on many previous occasions, switch the default physics engine in OpenSimulator from OpenDynamicsEngine to BulletSim.
...
The BulletSim plugin is higher performance and has a better implementation of vehicles amongst other things.
Many thanks to Robert Adams for making this possible with the enormous amount of work that he has done on this plugin.
If you want to continue using ODE, set physics = OpenDynamicsEngine in the [Startup] section of OpenSim.ini
2013-10-15 23:24:49 +01:00
a27c2432bb
This is Npgsql2.0.12.0-bin-ms-net3.5sp1
...
From http://pgfoundry.org/frs/download.php/3354/Npgsql2.0.12.0-bin-ms.net3.5sp1.zip
This is identical to the version added in ff8a7682
2013-10-14 23:59:49 +01:00
dbdcf2d995
Remove to re-add with version information for future reference
2013-10-14 23:58:12 +01:00
daf44cc65e
fix missing " for variable SRV_IMServerURI in example file
2013-10-12 20:47:10 -04:00
ff8a768258
Fernando Oliveira's Postgress SQL Server Data Connector as a single commit.
...
* Added PostGreSQL support
* Added MySQL/MySQLXGroupData.cs
* PostgreSQL data access implementation
* PostgreSQL dll binarie and RegionStore.migrations
* Migrations Scripts from MSSQL to POSTGRES
* Postgres SQL Type fixes
* Postgres SQL Connection string
* Data type issues
* more fixes
* tests and +tests
* UUID x string - FIGHT!
* Fixed PG types to internal csharp types
* More data type fix (PostgreSQL fields are case sensitive) :(
* more field case sensitive fixes
* changed the migration files to be case sensitive for fields.
* fixed fields case
* finished converting, now search for hidden bugs.
* some more fixes
* bool type fixed
* more case fixes;
* creatorID case fixed
* case fields fixed
* fixed default now() for TMStamp fields with don't allow nulls.
* fix case sensitve for Region name and Estate name
* fixed case for names for search
* fix class name Error
* Bug fixed on select and migrations
* Un-Reverting my change due to Postgres issue with the ILIKE function
* Fixed some issued for Diva Distro
* Fixes for integration with Diva Distro
* Added System.Core to prebuild.xml for PG project
* Configured to make DIff for Push to OpenSim Project
* Diffs only to PostgreSQL mods.
2013-10-12 16:33:45 -05:00
f76cc6036e
* Added a Basic DOS protection container/base object for the most common HTTP Server handlers. XMLRPC Handler, GenericHttpHandler and <Various>StreamHandler
...
* Applied the XmlRpcBasicDOSProtector.cs to the login service as both an example, and good practice.
* Applied the BaseStreamHandlerBasicDOSProtector.cs to the friends service as an example of the DOS Protector on StreamHandlers
* Added CircularBuffer, used for CPU and Memory friendly rate monitoring.
* DosProtector has 2 states, 1. Just Check for blocked users and check general velocity, 2. Track velocity per user, It only jumps to 2 if it's getting a lot of requests, and state 1 is about as resource friendly as if it wasn't even there.
2013-10-07 21:35:55 -05:00
75c68fa29e
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Data/MySQL/MySQLSimulationData.cs
OpenSim/Data/MySQL/Resources/RegionStore.migrations
OpenSim/Region/ClientStack/Linden/Caps/WebFetchInvDescModule.cs
OpenSim/Region/CoreModules/Avatar/Attachments/AttachmentsModule.cs
OpenSim/Region/CoreModules/Avatar/Inventory/Transfer/InventoryTransferModule.cs
OpenSim/Region/CoreModules/World/LightShare/LightShareModule.cs
OpenSim/Region/Framework/Scenes/Scene.cs
OpenSim/Region/Framework/Scenes/ScenePresence.cs
OpenSim/Region/Framework/Scenes/Tests/ScenePresenceCapabilityTests.cs
OpenSim/Region/OptionalModules/World/NPC/NPCModule.cs
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
2013-10-04 20:03:12 +01:00
585d0800dd
minor: Make OpenSimDefaults.ini consistent (spacing and tabs to spaces)
2013-09-27 00:14:40 +01:00
70b51f12cd
minor: Clean up tabbing and spacing issues in OpenSim.ini.example
2013-09-27 00:01:18 +01:00
979b17165b
For debug purposes, allow simulators to force use of earlier SIMULATION/0.1 teleport protocol even if SIMULATION/0.2 is available.
...
This is specified in the MaxOutgoingTransferVersion attribute of [EntityTransfer] in OpenSim.ini, see OpenSimDefaults.ini for more details.
Default remains "SIMULATION/0.2"
Primarily for http://opensimulator.org/mantis/view.php?id=6755
2013-09-19 22:45:50 +01:00
997700c4aa
minor: Make config-include .ini files more consistent
...
Chiefly tabs to spaces.
No actual setting changes
2013-09-18 23:49:27 +01:00
ac0a527976
Add [SimulationService] section to GridHypergrid.ini and StandaloneHypergrid.ini
...
This was already in Grid.ini and Standalone.ini
Default settings are same as previously, just introduce a debug ConnectorProtocolVersion parameter
2013-09-18 23:27:37 +01:00
53de6d94ea
minor: replace spaces with tabs for see_into_region setting
2013-09-12 23:38:50 +01:00
2d7adcb22f
BulletSim: update DLLs and SOs to disable Bullet's internal profiling.
...
This was accidentily left on. This version should make performance better
and fix the memory leak.
2013-09-12 13:07:18 -07:00
3c85afbb43
Allow setting the EntityTransfer-max_distance to 0 to override distance checks. This is to facilitate current viewer work fixing the distance limitations for teleporting.
2013-09-12 11:46:12 -04:00
8bcf753127
BulletSim: update DLLs and SOs with ClearCollisionCache inteface calls
...
and constraint debugging messages.
2013-09-11 09:12:26 -07:00
e34385634b
BulletSim: update DLLs and SOs for spring parameters and constraint
...
debugging dump code.
2013-09-11 09:12:22 -07:00
8755aeb348
BulletSim: update DLLs and SOs with Bullet svn version 2644 (no major fixes) and with BulletSim implementing more of the constraint types and parameter settings.
2013-09-11 09:11:56 -07:00
663059ac5c
chaning the default max_distance to 16383 as we actually start counting at zero, thank you dahlia for pointing this out.
2013-09-10 19:56:39 -04:00
ec5f17b2ce
This extends the default max_distance for teleports to 16384, a big thank you to all of the viewer devs who made this possibe!
2013-09-10 18:35:02 -04:00
2f365ea80b
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Avatar/Chat/ChatModule.cs
OpenSim/Region/Framework/Scenes/Scene.cs
2013-09-07 13:54:19 +01:00
b858be345a
minor: add doc about DefaultHGRegion and some of the other GridService region settings (though not all as of yet)
2013-09-05 00:41:03 +01:00
4cbadc3c49
Allow one to specify a DefaultHGRegion flag in [GridService] in order to allow different default regions for HG and direct grid logins.
...
This requires a new GridService.GetDefaultHypergridRegions() so ROBUST services require updating but not simulators.
This method still returns regions flagged with just DefaultRegion after any DefaultHGRegions, so if no DefaultHGRegions are specified
then existing configured defaults will still work.
Immediate use is for conference where we need to be able to specify different defaults
However, this is also generally useful to send experienced HG users to one default location and local users whose specified region fails (e.g. no "home" or "last") to another.
2013-09-02 17:27:45 +01:00
008c98a974
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/World/Region/RestartModule.cs
OpenSim/Region/Framework/Scenes/SceneGraph.cs
OpenSim/Region/Framework/Scenes/SceneObjectPart.cs
2013-09-01 22:49:31 +01:00
85824d2cd9
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-08-25 20:12:59 +01:00
5cd7bc2848
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-08-24 03:42:39 -07:00
6a24515269
Whitespace fubar.
2013-08-24 03:40:44 -07:00
1a623bb266
Rename pCampbot.ini -> pCampBot.ini (and example file) to be consistent with other capitalizations of pCampBot
2013-08-23 20:58:46 +01:00
70f89ae65b
Make it possible to adjust the pCampbot login delay via the [BotManager] LoginDelay parameter of pCampbot.ini
2013-08-22 23:43:33 +01:00
a6af561660
* Fix some threading issues in BulletXNA (the managed bullet library), this should better allow you to run it in multiple region scenarios (but why would you really want to do that?) Source in OpenSimLibs.
...
* Fixed a null ref during shutdown.
2013-08-20 21:09:17 -05:00
df7a1e68f6
Merge branch 'master' into careminster
2013-08-14 21:25:22 +01:00
225cf0d010
Add pCampbot RequestObjectTextures ini setting to control whether textures are requested for received objects.
2013-08-14 19:53:10 +01:00
5933f9448d
Add a SendAgentUpdates setting to a new pCampbot.ini.example file which can control whether bots send agent updates
...
pCampbot.ini.example is used by copying to pCampbot.ini, like other ini files
2013-08-13 23:54:50 +01:00
ad1b2902f2
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Application/OpenSimBase.cs
OpenSim/Region/ClientStack/Linden/UDP/LLClientView.cs
OpenSim/Region/ClientStack/Linden/UDP/LLUDPServer.cs
OpenSim/Region/Framework/Scenes/Scene.cs
OpenSim/Region/Framework/Scenes/ScenePresence.cs
2013-08-11 17:31:25 +01:00
d9bd6e6b5b
Add parameter and explanation of ManagedStats return to OpenSimDefaults.ini.
...
Add 'callback' query parameter to managed stats return to return function
form of JSON data.
2013-08-08 09:45:30 -07:00
005c69511d
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Avatar/Attachments/AttachmentsModule.cs
OpenSim/Region/Framework/Scenes/Scene.Inventory.cs
OpenSim/Region/Framework/Scenes/Scene.cs
2013-08-07 23:29:42 +01:00
dbd773e89e
Amend to last commit -- remove the obsolete var from OpenSim.ini.example
2013-08-07 10:04:53 -07:00
4c2f6de8e4
Add the experimental ability to dump stats (result of command "show stats all") to file OpenSimStats.log every 5 seconds.
...
This can currently only be activated with the console command "debug stats record start".
Off by default.
Records to file OpenSimStats.log for simulator and RobustStats.log for ROBUST
2013-08-06 18:29:33 +01:00
54b1071556
Allow older teleport ConnectorProtocolVersion of "SIMULATION/0.1" to be manually forced in a new [SimulationService] config setting.
...
This is for testing and debugging purposes to help determine whether a particular issue may be teleport related or not
"SIMULATION/0.2" (the newer teleport protocol) remains the default. If the source simulator only implements "SIMULATION/0.1" this will correctly allow fallback to the older protocol.
Specifying "SIMULATION/0.1" will force the older, less efficient protocol to always be used.
2013-08-02 23:12:54 +01:00
c9695a0a59
Move experimental attachments throttling further down the chain so that multiple attachments changes (e.g. change outfit) are also throttled
2013-08-02 00:00:00 +01:00
6fc03c7e6e
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Avatar/Attachments/AttachmentsModule.cs
2013-08-01 23:42:19 +01:00
216e785ca9
Add experimental "debug attachments throttle <ms>" setting (command line) and ThrottlePer100PrimsRezzed in [Attachments] in config
...
This is an experimental setting to control cpu spikes when an attachment heavy avatar logs in or avatars with medium attachments lgoin simultaneously.
It inserts a ms sleep specified in terms of attachments prims after each rez when an avatar logs in.
Default is 0 (no throttling).
"debug attachments <level>" changes to "debug attachments log <level>" which controls logging. A logging level of 1 will show the throttling performed if applicable.
Also adds "debug attachments status" command to show current throttle and debug logging levels.
2013-08-01 21:16:53 +01:00
21f5e67030
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ClientStack/Linden/Caps/GetTextureModule.cs
2013-08-01 01:23:24 +01:00
d82126b651
Add the Simian service config to the GridCommon example
2013-07-31 11:42:22 -07:00
bf283208df
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Framework/Servers/HttpServer/PollServiceRequestManager.cs
OpenSim/Region/Framework/Scenes/Scene.cs
2013-07-29 02:08:05 +01:00
7b0b5c9d97
Added BasicSearchModule.cs which handles OnDirFindQuery events. Removed that handler from both Groups modules in core, and replaced them with an operation on IGroupsModule.
2013-07-28 13:49:58 -07:00
9cbbb7eddf
Clarification on docs of .ini.examples for Groups (again)
2013-07-27 19:16:48 -07:00
1572e91b5f
Clarifications on documentation of Group configs
2013-07-27 08:04:48 -07:00
7914eaa357
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Framework/EntityTransfer/EntityTransferModule.cs
OpenSim/Region/Framework/Scenes/Scene.cs
OpenSim/Region/Framework/Scenes/ScenePresence.cs
bin/OpenSimDefaults.ini
2013-07-25 16:55:23 +01:00
e103e34f1d
Added config var that we all thought was already there: see_into_region. (Note: different from the defunct see_into_neighboring_sim, which used to control the process from the other end). This enables child agents in neighbors for which the root agent doesn't have permission to be in.
2013-07-24 11:25:41 -07:00
a7eb1b5b85
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Framework/Servers/HttpServer/PollServiceRequestManager.cs
OpenSim/Region/CoreModules/Framework/Caps/CapabilitiesModule.cs
OpenSim/Region/CoreModules/World/WorldMap/WorldMapModule.cs
2013-07-24 03:50:09 +01:00
7830cc9954
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Capabilities/Handlers/GetTexture/GetTextureHandler.cs
OpenSim/Region/ClientStack/Linden/Caps/BunchOfCaps/BunchOfCaps.cs
OpenSim/Region/ClientStack/Linden/Caps/UploadBakedTextureModule.cs
OpenSim/Region/ClientStack/Linden/UDP/LLUDPServer.cs
OpenSim/Region/CoreModules/Framework/Caps/CapabilitiesModule.cs
OpenSim/Region/CoreModules/Scripting/HttpRequest/ScriptsHttpRequests.cs
OpenSim/Region/CoreModules/ServiceConnectorsOut/Simulation/LocalSimulationConnector.cs
OpenSim/Region/Framework/Scenes/Scene.cs
OpenSim/Region/Framework/Scenes/SceneCommunicationService.cs
OpenSim/Region/Framework/Scenes/SceneObjectPart.cs
OpenSim/Region/Framework/Scenes/ScenePresence.cs
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/Plugins/SensorRepeat.cs
OpenSim/Server/Handlers/Simulation/AgentHandlers.cs
OpenSim/Services/Connectors/Asset/AssetServicesConnector.cs
OpenSim/Services/Connectors/Simulation/SimulationServiceConnector.cs
OpenSim/Services/HypergridService/UserAgentService.cs
2013-07-18 10:08:10 +01:00
9432f3c94d
Improvements to the ServiceThrottleModule: added a category and an itemid to the interface, so that duplicate requests aren't enqueued more than once.
2013-07-16 19:04:30 -07:00
d48946f9ef
Document obscure Groups config related to the user level required for creating groups
2013-07-14 16:51:07 -07:00
a65cec3986
BulletSim: implementation of linkset center-of-mass.
...
Default off, for the moment, until more testing.
Add separate thread and center-of-mass flags to OpenSimDefaults.ini.
Clean up comments in OpenSimDefaults.ini.
2013-07-06 08:25:15 -07:00
f2f33b7577
Some consistency fixes for the ini to stop parser breakage
2013-07-04 17:45:17 -04:00
ffcee82b1d
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Data/MySQL/MySQLSimulationData.cs
OpenSim/Region/Framework/Scenes/EventManager.cs
OpenSim/Region/Framework/Scenes/SceneObjectGroup.cs
2013-06-30 18:27:30 +01:00
4406f07a84
Add IMG_BLOOM1.jp2 to standard asset set, which is used in stars.
...
This makes stars appear more realistically rather than as massive chunks due to the missing IMG_BLOOM1 asset from the viewer.
Thanks to YoshikoFazuku for supplying the star asset which I then uploaded via a viewer and extracted as JPEG2000.
Thanks also to Ai Austin for helping this process along.
See http://opensimulator.org/mantis/view.php?id=6691 for more details.
2013-06-28 23:34:16 +01:00
56f4adeb60
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
OpenSim/Services/LLLoginService/LLLoginResponse.cs
OpenSim/Services/LLLoginService/LLLoginService.cs
2013-06-18 01:50:08 +01:00
b2c8d5eec7
Add Option: ClassifiedFee
...
Add option to set minimum fee for publishing classifieds. Many viewers have a
hard coded minimum of 50, which makes publishing classifieds fail where grids
have no economy. This allows the grid to set the minimum fee to a suitable
value for their operation.
The option is located in the [LoginService] section and defaults to 0. The
value is sent as "classified_fee" in the login response.
2013-06-13 09:18:27 -04:00
9fec0faade
Revert "Add option to set minimum fee for classified ads"
...
This reverts commit 90097de6c3
2013-06-11 21:46:40 -04:00
90097de6c3
Add option to set minimum fee for classified ads
...
Upcoming phoenix-firestorm (4.4.1) adds a configurable option for setting
the minimum price for publishing a classified ad.
http://hg.phoenixviewer.com/phoenix-firestorm-lgpl/rev/43415d69b048
2013-06-11 20:35:25 -04:00
fe4a67efb6
Merge branch 'avination-current' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Avatar/Inventory/Transfer/InventoryTransferModule.cs
OpenSim/Region/Framework/Interfaces/IDynamicMenuModule.cs
OpenSim/Region/OptionalModules/ViewerSupport/DynamicMenuModule.cs
OpenSim/Region/OptionalModules/World/MoneyModule/SampleMoneyModule.cs
2013-06-06 03:20:15 +01:00
02548bdc16
Update HTTP server
2013-06-04 21:11:16 +01:00
648e258b8e
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Avatar/Gods/GodsModule.cs
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/AsyncCommandManager.cs
2013-06-04 21:09:25 +01:00
43d804b998
New HttpServer_OpenSim.dll with increased limits on number of connections, requests, etc.
2013-06-04 12:27:22 -07:00
ba2f13db63
Adding back the BasicProfileModule
2013-05-31 21:19:15 -04:00
924a5df25f
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-05-30 19:20:36 -07:00
3aa2fb9928
BulletSim: remove unuseful BulletSim parameters from OpenSimDefaults.ini and
...
replace with things someone might actually want to tune (avatar height, ...).
2013-05-30 19:16:29 -07:00
328883700a
UserProfiles
...
UserProfiles for Robust and Standalone. Includes service and connectors for Robust and standalone opensim plus matching region module.
2013-05-30 17:59:18 -04:00
669fa3ff9a
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ClientStack/Linden/UDP/LLClientView.cs
OpenSim/Region/OptionalModules/Avatar/Voice/VivoxVoice/VivoxVoiceModule.cs
2013-05-30 21:48:09 +01:00
0c35d28933
BulletSim: enable GImpact shape for prims with cuts. Include DLLs and SOs
...
which recompute GImpact shape bounding box after creation as Bullet
doesn't do that itself (something it does for nearly every other shape).
Now, physical prims without cuts become single mesh convex meshes. Physical
prims with cuts become GImpact meshes. Meshes become a set of convex
hulls approximated from the mesh unless the hulls are specified in the
mesh asset data. The use of GImpact shapes should make some mechanical
physics more stable.
2013-05-26 17:35:12 -07:00
09c2cd0d76
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/SceneObjectPart.cs
OpenSim/Region/Physics/BulletSPlugin/BSShapes.cs
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
2013-05-24 00:45:08 +01:00
10097f13aa
BulletSim: update DLLs and SOs with version containing gImpact code.
2013-05-21 21:40:26 -07:00
42c82b564e
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ClientStack/Linden/UDP/LLUDPServer.cs
OpenSim/Region/CoreModules/Framework/EntityTransfer/EntityTransferModule.cs
OpenSim/Region/Framework/Scenes/SceneCommunicationService.cs
OpenSim/Region/Framework/Scenes/ScenePresence.cs
OpenSim/Region/Framework/Scenes/SimStatsReporter.cs
2013-05-16 21:59:14 +01:00
71a5cc2041
Updated libopenmetaverse to a5ad7f200e9bd2e91604ba921d1db3768108686b
2013-05-16 00:07:55 +02:00
12289c4fd1
Removed obsolete libopenmetaverse file
2013-05-16 00:02:28 +02:00
13cd8c17d7
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.cs
OpenSim/Services/LLLoginService/LLLoginResponse.cs
OpenSim/Services/LLLoginService/LLLoginService.cs
OpenSim/Tests/Common/Mock/TestClient.cs
2013-05-11 02:35:26 +01:00
182ea00cb3
Application support:
...
Adding some viwer supported url settings for destination guide and avatar picker apps. URL for the destinations should be: "secondlife:///app/teleport/slurl"
2013-05-09 10:50:18 -04:00
cdaceea5a6
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Framework/IClientAPI.cs
OpenSim/Region/ClientStack/Linden/UDP/LLClientView.cs
2013-05-08 21:51:48 +01:00
33aaa40bee
Adds an event and a method so that handling of the CachedTexture
...
packet can be pulled out of LLClientView and moved to
AvatarFactory. The first pass at reusing textures (turned off by
default) is included. When reusing textures, if the baked textures
from a previous login are still in the asset service (which generally
means that they are in the simulator's cache) then the avatar will not
need to rebake. This is both a performance improvement (specifically
that an avatars baked textures do not need to be sent to other users
who have the old textures cached) and a resource improvement (don't
have to deal with duplicate bakes in the asset service cache).
2013-05-08 13:13:51 -07:00
bda4565067
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Framework/EntityTransfer/EntityTransferModule.cs
OpenSim/Region/CoreModules/Framework/EntityTransfer/HGEntityTransferModule.cs
OpenSim/Region/CoreModules/World/Estate/EstateManagementModule.cs
OpenSim/Region/Framework/Interfaces/IEntityTransferModule.cs
2013-05-08 20:59:44 +01:00
601aa91163
Delete "" entry for AvatarPicker cap.
2013-05-07 19:16:42 -07:00
e92c05ebbd
Added AvatarPickerSearch capability handler.
2013-05-07 18:01:48 -07:00
3aa83738e2
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Application/OpenSimBase.cs
OpenSim/Region/CoreModules/Framework/InventoryAccess/InventoryAccessModule.cs
OpenSim/Region/Physics/BulletSPlugin/BSShapeCollection.cs
2013-05-04 01:22:12 +01:00
4cb73192a7
Make default config directory "."
2013-05-01 23:01:33 -04:00
8c5445b774
Merge branch 'master' into careminster
...
Conflicts:
ThirdParty/SmartThreadPool/SmartThreadPool.cs
2013-05-01 21:39:49 +01:00
8d3250cee4
Add information about creating a PID file for robust to the Robust.ini and Robust.HG.ini example files
2013-05-01 19:15:05 +01:00
d36a52ea55
Merge branch 'master' into careminster
2013-04-25 00:22:28 +01:00
1593d795ea
BulletSim: version of libBulletSim.so for 32 bit systems that doesn't
...
crash on startup. Doesn't yet solve the new glibcxx dependencies.
2013-04-24 15:01:11 -07:00
e324f6f3f0
BulletSim: update DLLs and SOs to they have no dependencies on newer
...
glibc (2.14) since that is not yet in some Linux distributions.
Add unmanaged API calls and code for creating single convex hull shapes.
2013-04-24 08:03:45 -07:00
ed22014646
revert CSJ2K.dll to version in use prior to commit d4fa2c69ed
2013-04-23 15:01:20 -07:00
8b57ee4fd1
Merge branch 'master' into careminster
2013-04-22 22:38:58 +01:00
3e818eaeb5
Add the enter uuid dialog
2013-04-22 22:58:33 +02:00
671a97ef76
Merge branch 'master' of ssh://3dhosting.de/var/git/careminster
2013-04-22 22:28:41 +02:00
a7a92e7339
Merge branch 'master' of ssh://3dhosting.de/var/git/careminster
2013-04-22 22:26:04 +02:00
4aa6f2bbba
Add the set object owner floater template
2013-04-22 22:23:42 +02:00
6ddc39a676
Clean up unused config and config comments.
2013-04-21 16:56:18 -07:00
231c298ca5
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ClientStack/Linden/UDP/LLClientView.cs
bin/OpenMetaverse.StructuredData.XML
bin/OpenMetaverse.XML
bin/OpenMetaverseTypes.XML
2013-04-21 14:11:39 +01:00
855c88a9c0
Fix spelling
2013-04-20 11:57:11 -04:00
d4fa2c69ed
update libomv to git master which adds support for MaterialID in TextureEntry
2013-04-17 21:31:18 -07:00
7cf377fff0
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Data/MySQL/MySQLAssetData.cs
OpenSim/Region/CoreModules/Framework/InventoryAccess/InventoryAccessModule.cs
OpenSim/Region/Physics/BulletSPlugin/BSShapeCollection.cs
2013-04-10 13:20:55 +01:00
59135c9a31
BulletSim: add Bullet HACD library invocation. Turned off by default as not
...
totally debugged. Updated DLLs and SOs with more debugged HACD library code.
2013-04-09 18:00:23 -07:00
659c741ff5
Add more notes to async_call_method relating to UnsafeQueueUserWorkItem
...
UnsafeQueueUserWorkItem is so called because it allows the calling code to escalate its security privileges.
However, since we must already trust this code anyway in OpenSimulator this is not an issue.
2013-04-09 23:15:01 +01:00
4d2203ff52
BulletSim: Add dylib for BulletSim and add he who figured out building BulletSim
...
on a Mac to the CONTRIBUTORS file.
2013-04-08 09:15:20 -07:00
f68b963596
fixed bullet config for osx
...
Signed-off-by: Robert Adams <Robert.Adams@intel.com>
2013-04-08 09:09:30 -07:00
41a652f6bd
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/SceneObjectPart.cs
2013-04-02 23:47:19 +01:00
17aef1c883
BulletSim: update unmanaged API for HACD parameter passing. Bullet HACD
...
mesh to hull conversion calls in place but code not working. Update
BulletSim DLLs and SOs for new API and HACD code.
2013-04-01 18:03:11 -07:00
5b950ca36a
Merge commit '464201b41d5f5fdd7c88ab5e95dd7b6fbae6d766' into careminster
2013-03-19 00:54:23 +00:00
6e1b3f9951
*Yet another HTTPServer update code changes in OpenSim Libs. * This fixes a connection close issue by getting rid of the socket references * This adds a connection timeout checker to shutdown poor or evil connections and combats DOS attempts that just connect and make no complete requests and just wait. It also actually implements KeepAlive... instead of just understanding the connection header in the request... you can test by connecting and requesting a keepalive header and sending another request on the same connection. The new timeout checker closes expired keepalive sessions, just make sure you send the request within 70 seconds of connecting or the timeout checker will timeout the connection.
2013-03-16 03:14:11 -04:00
8b657773e4
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/ScenePresence.cs
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/Plugins/SensorRepeat.cs
2013-03-14 22:34:15 +00:00
9fad90a914
Merge branch 'master' of ssh://opensim/var/git/opensim
2013-03-14 00:58:00 -04:00
42c533c589
* Updates HttpServer again to re-add the code that closes the stream and connection when It's done sending. Be on the lookout for an old linux/mono bug where the client doesn't get the last bit of the stream before it is disconnected!. Code on opensim-libs. All tests pass.. HttpServer's internal tests pass.. but just a bad feeling. More people should test :)
2013-03-14 00:57:42 -04:00
710381e838
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/Tests/SceneObjectUndoRedoTests.cs
2013-03-13 02:02:46 +00:00
fb1211ad5e
Add DisableInterRegionTeleportCancellation option in [EntityTransfer] section of OpenSim.ini. False by default.
...
This option allows the simulator to specify that the cancel button on inter-region teleports should never appear.
This exists because sometimes cancellation will result in a stuck avatar requiring relog.
It may be hard to prevent this due to the protocol design (the LL grid has the same issue)
In small controlled grids where teleport failure is practically impossible it can be better to disable teleport cancellation entirely.
2013-03-12 23:01:27 +00:00
1e7c7fb779
Merge branch 'master' into careminster
2013-03-11 19:09:49 +00:00
13f3bcae94
Update comment about setting physics=BulletSimN as the C# Bullet
...
version has been wrapped into one BulletSim and the physics engine
selection is now done as specified in OpenSimDefaults.ini.
2013-03-10 22:24:34 -07:00
70f0587558
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Framework/EntityTransfer/EntityTransferModule.cs
2013-03-08 01:07:05 +00:00
2f1aa87eb5
One more comment inconsistency fixed.
2013-03-07 08:02:48 -08:00
fdebee25db
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-03-07 06:41:03 -08:00
2b0056eaca
Fixed inconsistency in comments. Thanks Ai Austin.
2013-03-07 06:40:39 -08:00
81552f41c6
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ClientStack/Linden/Caps/MeshUploadFlagModule.cs
OpenSim/Region/ClientStack/Linden/UDP/LLClientView.cs
OpenSim/Region/CoreModules/Avatar/Attachments/AttachmentsModule.cs
OpenSim/Region/OptionalModules/Avatar/Attachments/TempAttachmentsModule.cs
2013-03-05 23:57:53 +00:00
7556b42d7a
* Update LibOMV to f8f8e616b37a7ea22b7922b2331999bc06725bf9
...
* Add zero length blocks to the new packet blocks to remain compatible with older viewers and avoid a NullRef when _packets_.cs calls the Length parameter.. which adds up the Length property all of the blocks.
2013-03-04 21:26:26 -05:00
aadf7d32d1
GridUserService was missing from [Gatekeeper]
2013-03-04 12:52:28 -08:00
b47ffb5dc4
Added existance and default value for [XEngine]MinTimerInterval to OpenSimDefaults.ini
2013-03-02 13:02:02 -08:00
1bc8692a99
Move AllowedClients and BannedClients section to new [AccessControl] section in OpenSim.ini from [Startup]
...
This change also corrects the setting names - they were actually wrong (though the text in {} was correct).
If there are settings in [Startup] they will continue to be used and anything there will override settings in [AccessControl]
2013-03-02 01:43:54 +00:00
4999d7920a
Revert "Removed more vars from [Startup]. I think these were already moved elsewhere, because I can't find any reference to them in the code."
...
This reverts commit efa7227865
2013-03-02 01:23:01 +00:00
a675f7d4c3
Merge branch 'master' into careminster
2013-03-01 23:54:00 +00:00
20530ee667
Moved permissions config vars out of [Startup] into [Permissions]. Backwards compatible ([Startup] still being looked up), but please update your configs sometime soon.
2013-03-01 15:24:22 -08:00
efa7227865
Removed more vars from [Startup]. I think these were already moved elsewhere, because I can't find any reference to them in the code.
2013-03-01 14:18:01 -08:00
eb9458fd7e
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/SceneManager.cs
2013-02-28 21:20:07 +00:00
9e0c678c1e
Robust.HG.ini.example updated to get an [Hypergrid] section too.
2013-02-28 06:24:09 -08:00
64b8ce73da
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-02-27 20:50:03 -08:00
f1010d7b15
Moved the HG default variables out of [Startup] and into their own section [Hypergrid] in *Common.ini.example. Backwards compatible for now.
2013-02-27 20:49:41 -08:00
1bef19b914
Do not have the Freeswitch connector on by default in Robust ini example files.
...
This is not widely used (may even be currently broken), only allows very poor quality voice (not the fault of FreeSwitch)
and requires a complicated Freeswitch setup.
Having it on but not configured results in spurious warnings in the logs
2013-02-27 21:45:31 +00:00
578174d21c
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Framework/RegionLoader/Web/RegionLoaderWebServer.cs
OpenSim/Region/CoreModules/Scripting/LSLHttp/UrlModule.cs
OpenSim/Region/CoreModules/World/WorldMap/WorldMapModule.cs
2013-02-27 18:05:04 +00:00
20760fde25
Improve description of GenerateMapTiles config option
2013-02-27 00:31:54 +00:00
917c1695a1
Add documentation on default or Warp3D image module choice to OpenSim.ini.example.
...
As before, default is MapImageModule.
Thanks to Ai Austin for pointing out this omission.
2013-02-27 00:27:21 +00:00
54ee95dd8e
Merge branch 'master' into careminster
2013-02-26 13:34:20 +00:00
d0cb4fc326
Move map related settings from [Startup] to a new [Map] section in OpenSim.ini
...
Existing map settings in [Startup] will continue to work, and if present will override anything in [Map]
However, the proper place for such settings would now be [Map]
This is to reduce the use of [Startup] as a bag for non-generic settings which should really go in sections, in common with other settings.
This commit also extends Diva's previous work to allow a default setting to be given when looking at multiple sections for settings.
2013-02-25 23:04:38 +00:00
53470d5057
Missing var in [LoginService] for HG Robust.
2013-02-25 10:25:36 -08:00
e3ea2c4bee
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Framework/EntityTransfer/EntityTransferModule.cs
2013-02-23 20:37:09 +00:00
6a01683aeb
More clarification on the [Groups] section
2013-02-23 11:24:11 -08:00
a0161e7161
Further clarification on the same spot.
2013-02-23 11:21:14 -08:00
c72c238f5d
Improved documentation of Groups section.
2013-02-23 11:16:50 -08:00
0d08f81421
Err.. wrong dll name for groups in Robust.HG.ini.example
2013-02-21 19:07:39 -08:00
9534d5f929
Merge branch 'master' into careminster
2013-02-22 01:28:54 +00:00
0e5859d2b4
Minor formatting cleanup. No changes.
2013-02-21 17:26:37 -08:00
e515cdddec
Simplification of HG configs: HomeURI and GatekeeperURI now are defined as default under [Startup]. They can then be overwritten in the other sections (but probably shouldn't). I kept the existing code for backwards compatibility, so this should not cause any breaks from people's current configurations. But people should move to have these 2 vars under [Startup] -- see OpenSim.ini.example and Robust.HG.ini.example. And yes, both names now end with "URI" for consistency.
2013-02-21 17:26:19 -08:00
db2b3627f2
Add information about MinLoginLevel to example ini files
2013-02-20 00:48:02 +00:00
fc89987656
Previous build failed. Checking in a dummy change to see if the fail persists.
2013-02-19 07:30:55 -08:00
9380d01976
First commit of Diva Groups. The Data bits went to OpenSim.Data core, the rest to Addons.Groups.dll.
2013-02-19 07:26:40 -08:00
46e182dbf5
Offline IM: moved the Data and MySQL bits to the corresponding places in core, so that it will be easier to plugin a SQLite backend, if anyone is interested in doing that.
2013-02-19 06:37:20 -08:00
5e709b087c
Donating Diva OfflineIM as an addon in a single dll, OpenSim.Addons.OpenSim.dll
2013-02-18 15:44:00 -08:00
1d7276235a
BulletSim: add calls for creating all the different Bullet constraint types.
...
Updated the DLLs and SOs and code for BulletXNA to create the types.
All the detailed control calls are not all in place yet.
2013-02-17 20:13:49 -08:00
d0c5e0990b
Merge branch 'master' into careminster
2013-02-13 01:54:06 +00:00
0194a3d890
BulletSim: fix density since the simulator/viewer track density in a
...
funny unit that is 100 times real density (default 1000).
Fix avatar drifting slowly when stationary flying.
Fix for physical prims getting corrected for being under terrain when it was
just its geometric center that was below terrain.
Add PreUpdatePropertyAction allowing plugable modifiction of phys
parameters returned from Bullet.
Fix an exception setting GravityMultiplier on initialization.
Update DLLs and SOs for good measure (no functional change).
2013-02-12 15:52:10 -08:00
467e8d56b5
Merge branch 'master' into careminster
2013-02-12 23:21:26 +00:00
aaa80d11a8
Replaced Ionic.Zip.dll with a new one that fixes a bug in it. DotNetZip (from which Ionic.Zip.dll is derived) is now a fork in opensim-libs, forked from 1.9.1.8 and added that simple bug fix.
2013-02-12 14:47:26 -08:00
069e587841
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Data/MySQL/MySQLSimulationData.cs
OpenSim/Data/MySQL/Resources/RegionStore.migrations
2013-02-10 00:17:14 +00:00
4808b8ee38
BulletSim: add parameter to set global contact breaking threshold. Update DLLs and SOs for setting same.
2013-02-08 16:29:52 -08:00
12971e73d4
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Asset/FlotsamAssetCache.cs
2013-02-08 23:29:47 +00:00
e93defd0ca
Adds size limits to JsonStore. Adds a separate configuration
...
variable to enable binding to dynamic attributes.
2013-02-08 15:07:43 -08:00
45f5a6a6db
Merge branch 'master' into careminster
...
Conflicts:
bin/HttpServer_OpenSim.dll
2013-02-07 20:51:51 +00:00
94a5232d3a
* Adds Websocket support to baseHttpServer and IHttpServer.cs . This allows modules to set up a websocket server that websocket clients can connect to. An example module is in OptionalModules/Example/WebSocketEchoTest/WebSocketEchoModule.cs
2013-02-07 10:50:17 -05:00
4867a7cbbf
This is the final commit that enables the Websocket handler
2013-02-07 10:27:18 -05:00
07a7ec4d1b
minor: Add explanation of MaptileStaticUUID setting in Regions.ini.example
2013-02-06 02:40:32 +00:00
d8c27de395
Merge branch 'master' into careminster
2013-02-06 02:38:30 +00:00
f567ff9f51
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Physics/BulletSPlugin/BSShapeCollection.cs
2013-02-06 02:22:12 +00:00
3646361279
BulletSim: make removing zero width triangles from meshes optional
...
and, for the moment, default to 'off'.
2013-02-05 17:19:55 -08:00
dce9e323f4
BulletSim: remove degenerate triangles from meshes. This fixes the
...
invisible barriers in sculptie doorways (Mantis 6529).
Bump up level-of-detail for physical meshes to 32 (the max). This
fixes the invisible barriers that showed up in prim cut arches.
NOTE: the default LOD values are removed from OpenSimDefaults.ini.
If you don't change your OpenSimDefaults.ini, you will continue
to see the arch problem.
2013-02-05 16:56:33 -08:00
ad438ee59f
BulletSim: rework some parameter setting implementation moving functionality that was in BSScene to BSParam. Remove unused parameters that were passed to the unmanaged code. Update DLLs and SOs for the new param block.
2013-02-05 16:56:23 -08:00
1dc09d8e8f
We're not really done here.. but we're getting there. Socket Read is working.. Still have to do Header.ToBytes and compose a websocket frame with a payload.
2013-02-05 18:02:25 -05:00
7482ad1c22
Merge branch 'master' into careminster
2013-02-04 19:21:39 +00:00
80d9b336ff
Remove [XMLRPC] section I added by accident to the top of OpenSimDefaults.ini in previous commit 95883282
2013-02-04 07:08:48 +00:00
9588328242
Stop exceptions being thrown if GenerateMapTiles = false but no static map tile has been set. Do more informative warn instead.
2013-02-02 00:59:26 +00:00
e497cf6f04
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.cs
2013-01-31 20:16:45 +00:00
ce4faf497f
Add config option to Regions.ini for new maptile feature
2013-01-30 23:41:32 -05:00
9a4de546fe
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ClientStack/Linden/UDP/LLClientView.cs
2013-01-31 02:53:11 +00:00
e9aff0a91d
BulletSim: do not zero an avatar's standing velocity if it is standing
...
on a moving object.
Rearrange pre/post action subscription code to put more in locks.
Add meshmerizer params to BulletSimTestUtil scene creation (and fix line endings).
Rebuilt version of DLLs and SOs with cleaned up code and no profiling for sure.
2013-01-28 15:11:50 -08:00
2cd56014a7
BulletSim: update Bullet with profiling disabled. This seems to fix the memory leak problem.
2013-01-28 06:21:51 -08:00
0b8bf69470
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Scripting/LSLHttp/UrlModule.cs
2013-01-25 00:10:32 +00:00
427ab219b8
Add JSONification of WebStats module. Adds a '?json' query parameter
...
to the fetch URL to return the data in JSON format. Also adds a simple
'sim.html' that uses JavaScript to display the JSON data. Not pretty
but an example.
2013-01-24 10:44:57 -08:00
ba9d6b7337
* Repairs the Object updates, Collision updates, and Child Prim methods making the bulletXNA engine work again.
...
* The only thing that had an issue was when creating a new RigidBody, BulletXNA didn't know the type SimMotionState and the upcast type is unknown in the constructor. Therefore, I had to update the IMotionState with a new method 'SetBody'. All of the duplicated type information has been removed and BulletXNA is not relying on any non-standard types external to the library.
2013-01-24 07:11:32 -05:00
2ce4a758e2
Merge branch 'master' into careminster
2013-01-24 00:27:00 +00:00
be4c8c4931
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ScriptEngine/XEngine/XEngine.cs
2013-01-24 00:25:08 +00:00
5b334079e0
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-01-23 16:23:11 -08:00
1c3d84fe03
BulletSim: pass up and report the real collision penetration.
2013-01-23 16:20:44 -08:00
55c6753b13
Merge branch 'master' into cooptermination
2013-01-24 00:03:44 +00:00
c51cae8fe8
Add information on ScriptStopStrategy to [XEngine] in OpenSimDefaults.ini and OpenSim.ini.example. Default remains abort.
...
This setting controls whether scripts are stopped by aborting their threads externally (abort) or by co-operative checks from the compiled script (co-op)
co-op should be more stable but this option is experimental.
If moving from co-op to abort, existing script DLLs will need to be recompiled.
This currently can only be done manually, either by setting DeleteScriptsOnStartup = true for one run
or by deleting the script DLL* files in bin/ScriptEngines/<region-id>/
One can move from co-op back to abort without recompilation, but reverting back to co-op again will need script recompile
2013-01-23 23:57:09 +00:00
cc4cfd9fa8
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/SceneObjectPart.cs
OpenSim/Region/Physics/BulletSNPlugin/BSShapeCollection.cs
2013-01-23 02:38:59 +00:00
2c517d792f
This updates prebuild to remove BulletSimN, implements the BulletSim API in BulletSPlugin using the BulletXNA Bullet physics engine. It also updates the BulletXNA library to be compatible with the changes. OpenSimDefaults has been updated to describe how to switch engines and terrain implementations.
2013-01-20 08:18:16 -05:00
9c590e51b6
IRCBridgeModule: optional agent-alertbox for IRC enabled Regions look in OpenSimDefaults.ini / section [IRC]
...
http://opensimulator.org/mantis/view.php?id=6470
idea: https://github.com/ssm2017/IrcBridgeAlert
2013-01-19 02:40:28 +00:00
70fa41863d
Merge commit 'f54b398540698e6e09022fe77b6405624b532f5c' into careminster
2013-01-16 01:13:14 +00:00
fc5711fa7a
Merge commit '8bf0a9f85dda4b1831630b65620d5c6868196c11' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/SceneObjectPart.cs
2013-01-16 01:11:20 +00:00
13778c895a
BulletSim: by default, turn on continuious collision detection (CCD)
...
and enable friction computation caching. Remove dangerous BulletSim
settings from OpenSimDefaults.ini.
2013-01-15 01:44:34 -08:00
459fcd81c9
BulletSim: move center of gravity of linkset to its geometric center.
...
Necessitated allowing simulator and physical position of a body to
get out of sync since Bullet assumes that <0,0,0> is the center of mass.
Update DLLs and SOs for the UpdateChildTransform so positions of
individual prim in a linkset can be implemented.
2013-01-11 16:47:53 -08:00
3a495ccd56
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ClientStack/Linden/Caps/BunchOfCaps/BunchOfCaps.cs
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/Plugins/Timer.cs
OpenSim/Region/ScriptEngine/XEngine/XEngine.cs
2013-01-10 01:38:03 +00:00
Justin Clark-Casey (justincc)